cleanup

Beta

CHANGELOGS.md

@@ -5,16 +5,9 @@ sunnypilot - 0.9.8.0 (2024-xx-xx)
 * UPDATED: Synced with commaai's openpilot
   * master commit 4ef757c (July 06, 2024)
 * NEW❗: Default Driving Model: Notre Dame (July 01, 2024)
-* NEW❗: Longitudinal: Acceleration Personality thanks to kegman, rav4kumar, and arne1282! (CTV 2.0: GlideTech)
+* NEW❗: Longitudinal: Acceleration Personality thanks to kegman, rav4kumar, and arne1282!
   * Select from three distinct acceleration personalities: Eco, Normal, and Sport
   * Acceleration personalities are integrated directly into the model's acceleration matrix and can be activated in real-time!
-* NEW❗: Toyota - Drive Mode Selector
-  *  When enabled you can control acceleration personality just with press of button!
-* UPDATED: Dynamic Experimental Control
-  * Switched to weighted moving averages to enhance responsiveness to recent data.
-  * Goal is to improve real-time detection accuracy in dynamic conditions.
-  * Capable of handling the increased complexity that comes with this approach.
-  * Particularly beneficial in environments where recent changes are critical to performance.
 * NEW❗: Longitudinal: Dynamic Personality thanks to rav4kumar!
   * Dynamically adjusts following distance and reaction based on your "Driving Personality" setting
   * Personalities adapt in real-time to your speed and the distance to the lead car
@@ -33,8 +26,8 @@ sunnypilot - 0.9.8.0 (2024-xx-xx)
     * Toyota TSS1/1.5, equipped with factory Blind Spot Monitoring (BSM)
     * Prius TSS2, equipped with factory Blind Spot Monitoring (BSM)
   * NOTE: Only enable this feature if your Toyota/Lexus vehicle has factory Blind Spot Monitor equipped, and mentioned in the supported platforms list
-* UPDATED: Toyota: TSS2 longitudinal: Custom Tuning (CTV 2.0: GlideTech)
-  * Re-tuned and tested by the community (September 29, 2024)
+* UPDATED: Toyota: TSS2 longitudinal: Custom Tuning
+  * Re-tuned and tested by the community (July 1, 2024)
 * UPDATED: Driving Model Selector v5
   * NEW❗: Driving Model additions
     * Notre Dame (July 01, 2024) - NDv3
@@ -45,6 +38,9 @@ sunnypilot - 0.9.8.0 (2024-xx-xx)
   * In response to the official deprecation of support for Smart DSU (SDSU) and Radar CAN Filter in the upstream ([commaai/openpilot#32777](https://github.com/commaai/openpilot/pull/32777)), sunnypilot will continue maintaining software support for Smart DSU (SDSU) and Radar CAN Filter
 * UPDATED: Continued support for Mapbox navigation
   * In response to the official temporary deprecation of support for Mapbox navigation in the upstream ([commaai/openpilot#32773](https://github.com/commaai/openpilot/pull/32773)), sunnypilot will continue maintaining software support for Mapbox navigation
+* NEW❗: Toyota - Automatic Brake Hold (AHB) thanks to AlexandreSato!
+  * When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold
+  * NOTE: Only for Toyota/Lexus vehicles with TSS2/LSS2
 * NEW❗: Toyota - Automatic Door Locking and Unlocking thanks to AlexandreSato, cydia2020, and dragonpilot-community!
   * Auto Lock by Speed: All doors are automatically locked when vehicle speed is approximately 6 mph (10 km/h) or higher
   * Auto Unlock by Shift to P: All doors are automatically unlocked when shifting the shift lever to P

cereal/car.capnp

@@ -138,6 +138,7 @@ struct CarEvent @0x9b1657f34caf3ad3 {
     speedLimitConfirmed @140;
     torqueNNLoad @141;
     hyundaiRadarTracksAvailable @142;
+    spAutoBrakeHold @143;
 
     radarCanErrorDEPRECATED @15;
     communityFeatureDisallowedDEPRECATED @62;

common/params.cc

@@ -330,6 +330,7 @@ std::unordered_map<std::string, uint32_t> keys = {
     {"TorqueLateralJerk", PERSISTENT | BACKUP},
     {"TorqueMaxLatAccel", PERSISTENT | BACKUP},
     {"TorquedOverride", PERSISTENT | BACKUP},
+    {"ToyotaAutoHold", PERSISTENT | BACKUP},
     {"ToyotaAutoLockBySpeed", PERSISTENT | BACKUP},
     {"ToyotaAutoUnlockByShifter", PERSISTENT | BACKUP},
     {"ToyotaDriveMode", PERSISTENT | BACKUP},

selfdrive/car/card.py

@@ -60,6 +60,7 @@ class Car:
     self.mads_disengage_lateral_on_brake = self.params.get_bool("DisengageLateralOnBrake")
     self.mads_dlob = self.enable_mads and self.mads_disengage_lateral_on_brake
     self.mads_ndlob = self.enable_mads and not self.mads_disengage_lateral_on_brake
+    self.sp_toyota_auto_brake_hold = self.params.get_bool("ToyotaAutoHold")
     self.CP.alternativeExperience = 0
     if not self.disengage_on_accelerator:
       self.CP.alternativeExperience |= ALTERNATIVE_EXPERIENCE.DISABLE_DISENGAGE_ON_GAS
@@ -67,6 +68,8 @@ class Car:
       self.CP.alternativeExperience |= ALTERNATIVE_EXPERIENCE.ENABLE_MADS
     elif self.mads_ndlob:
       self.CP.alternativeExperience |= ALTERNATIVE_EXPERIENCE.MADS_DISABLE_DISENGAGE_LATERAL_ON_BRAKE
+    if self.sp_toyota_auto_brake_hold:
+      self.CP.alternativeExperience |= ALTERNATIVE_EXPERIENCE.ALLOW_AEB
 
     if self.CP.customStockLongAvailable and self.CP.pcmCruise and self.params.get_bool("CustomStockLong"):
       self.CP.pcmCruiseSpeed = False

selfdrive/car/hyundai/interface.py

@@ -126,7 +126,7 @@ class CarInterface(CarInterfaceBase):
 
       if 0x1fa in fingerprint[CAN.ECAN]:
         ret.spFlags |= HyundaiFlagsSP.SP_NAV_MSG.value
-      if Params().get("DongleId", encoding='utf8') in ("012c95f06918eca4", "68d6a96e703c00c9", "11c1f1909ca37bca"):
+      if Params().get("DongleId", encoding='utf8') in ("012c95f06918eca4", "68d6a96e703c00c9"):
         ret.spFlags |= HyundaiFlagsSP.SP_UPSTREAM_TACO.value
     else:
       ret.enableBsm = 0x58b in fingerprint[0]

selfdrive/car/toyota/carcontroller.py

@@ -1,8 +1,11 @@
 from cereal import car
+import math
+from openpilot.common.params import Params
+from openpilot.selfdrive.controls.lib.pid import PIDController
 from common.conversions import Conversions as CV
 from openpilot.common.numpy_fast import clip, interp
 from openpilot.selfdrive.car import apply_meas_steer_torque_limits, apply_std_steer_angle_limits, common_fault_avoidance, make_can_msg, make_tester_present_msg, \
-                                    create_gas_interceptor_command
+                                    create_gas_interceptor_command, rate_limit
 from openpilot.selfdrive.car.interfaces import CarControllerBase
 from openpilot.selfdrive.car.toyota import toyotacan
 from openpilot.selfdrive.car.toyota.values import CAR, STATIC_DSU_MSGS, NO_STOP_TIMER_CAR, TSS2_CAR, \
@@ -13,6 +16,11 @@ from opendbc.can.packer import CANPacker
 GearShifter = car.CarState.GearShifter
 SteerControlType = car.CarParams.SteerControlType
 VisualAlert = car.CarControl.HUDControl.VisualAlert
+LongCtrlState = car.CarControl.Actuators.LongControlState
+
+ACCELERATION_DUE_TO_GRAVITY = 9.81  # m/s^2
+
+ACCEL_WINDUP_LIMIT = 0.5  # m/s^2 / frame
 
 # LKA limits
 # EPS faults if you apply torque while the steering rate is above 100 deg/s for too long
@@ -46,6 +54,9 @@ class CarController(CarControllerBase):
     self.steer_rate_counter = 0
     self.distance_button = 0
 
+    self.pcm_accel_compensation = 0.0
+    self.permit_braking = 0.0
+
     self.packer = CANPacker(dbc_name)
     self.gas = 0
     self.accel = 0
@@ -55,6 +66,13 @@ class CarController(CarControllerBase):
     self.last_blindspot_frame = 0
 
     self._auto_lock_speed = 0.0
+
+    if CP.spFlags & ToyotaFlagsSP.SP_AUTO_BRAKE_HOLD:
+      self.brake_hold_active: bool = False
+      self._brake_hold_counter: int = 0
+      self._brake_hold_reset: bool = False
+      self._prev_brake_pressed: bool = False
+
     self._auto_lock_once = False
     self._gear_prev = GearShifter.park
 
@@ -133,6 +151,39 @@ class CarController(CarControllerBase):
                                                           lta_active, self.frame // 2, torque_wind_down))
 
     # *** gas and brake ***
+    # For cars where we allow a higher max acceleration of 2.0 m/s^2, compensate for PCM request overshoot and imprecise braking
+    # TODO: sometimes when switching from brake to gas quickly, CLUTCH->ACCEL_NET shows a slow unwind. make it go to 0 immediately
+    if self.CP.flags & ToyotaFlags.RAISED_ACCEL_LIMIT and CC.longActive and not CS.out.cruiseState.standstill:
+      # calculate amount of acceleration PCM should apply to reach target, given pitch
+      accel_due_to_pitch = math.sin(CS.slope_angle) * ACCELERATION_DUE_TO_GRAVITY
+      net_acceleration_request = actuators.accel + accel_due_to_pitch
+
+      # let PCM handle stopping for now
+      pcm_accel_compensation = 0.0
+      if actuators.longControlState != LongCtrlState.stopping:
+        pcm_accel_compensation = 2.0 * (CS.pcm_accel_net - net_acceleration_request)
+
+      # prevent compensation windup
+      pcm_accel_compensation = clip(pcm_accel_compensation, actuators.accel - self.params.ACCEL_MAX,
+                                    actuators.accel - self.params.ACCEL_MIN)
+
+      self.pcm_accel_compensation = rate_limit(pcm_accel_compensation, self.pcm_accel_compensation, -0.01, 0.01)
+      pcm_accel_cmd = actuators.accel - self.pcm_accel_compensation
+
+      # Along with rate limiting positive jerk below, this greatly improves gas response time
+      # Consider the net acceleration request that the PCM should be applying (pitch included)
+      if net_acceleration_request < 0.1:
+        self.permit_braking = True
+      elif net_acceleration_request > 0.2:
+        self.permit_braking = False
+    else:
+      self.pcm_accel_compensation = 0.0
+      pcm_accel_cmd = actuators.accel
+      self.permit_braking = True
+
+    pcm_accel_cmd = clip(pcm_accel_cmd, self.params.ACCEL_MIN, self.params.ACCEL_MAX)
+
+
     if self.CP.enableGasInterceptorDEPRECATED and CC.longActive:
       MAX_INTERCEPTOR_GAS = 0.5
       # RAV4 has very sensitive gas pedal
@@ -148,7 +199,6 @@ class CarController(CarControllerBase):
       interceptor_gas_cmd = clip(pedal_command, 0., MAX_INTERCEPTOR_GAS)
     else:
       interceptor_gas_cmd = 0.
-    pcm_accel_cmd = clip(actuators.accel, self.params.ACCEL_MIN, self.params.ACCEL_MAX)
 
     # TODO: probably can delete this. CS.pcm_acc_status uses a different signal
     # than CS.cruiseState.enabled. confirm they're not meaningfully different
@@ -168,6 +218,9 @@ class CarController(CarControllerBase):
 
     self.last_standstill = CS.out.standstill
 
+    if self.CP.spFlags & ToyotaFlagsSP.SP_AUTO_BRAKE_HOLD:
+      can_sends.extend(self.create_auto_brake_hold_messages(CS))
+
     # handle UI messages
     fcw_alert = hud_control.visualAlert == VisualAlert.fcw
     steer_alert = hud_control.visualAlert in (VisualAlert.steerRequired, VisualAlert.ldw)
@@ -189,11 +242,14 @@ class CarController(CarControllerBase):
       if pcm_cancel_cmd and self.CP.carFingerprint in UNSUPPORTED_DSU_CAR:
         can_sends.append(toyotacan.create_acc_cancel_command(self.packer))
       elif self.CP.openpilotLongitudinalControl:
-        can_sends.append(toyotacan.create_accel_command(self.packer, pcm_accel_cmd, pcm_cancel_cmd, self.standstill_req, lead, CS.acc_type, fcw_alert,
-                                                        self.distance_button, reverse_acc))
+        # internal PCM gas command can get stuck unwinding from negative accel so we apply a generous rate limit
+        pcm_accel_cmd = min(pcm_accel_cmd, self.accel + ACCEL_WINDUP_LIMIT) if CC.longActive else 0.0
+
+        can_sends.append(toyotacan.create_accel_command(self.packer, pcm_accel_cmd, pcm_cancel_cmd, self.permit_braking, self.standstill_req, lead,
+                                                        CS.acc_type, fcw_alert, self.distance_button, reverse_acc))
         self.accel = pcm_accel_cmd
       else:
-        can_sends.append(toyotacan.create_accel_command(self.packer, 0, pcm_cancel_cmd, False, lead, CS.acc_type, False, self.distance_button, reverse_acc))
+        can_sends.append(toyotacan.create_accel_command(self.packer, 0, pcm_cancel_cmd, True, False, lead, CS.acc_type, False, self.distance_button, reverse_acc))
 
     if self.frame % 2 == 0 and self.CP.enableGasInterceptorDEPRECATED and self.CP.openpilotLongitudinalControl:
       # send exactly zero if gas cmd is zero. Interceptor will send the max between read value and gas cmd.
@@ -286,3 +342,25 @@ class CarController(CarControllerBase):
         # print("bsm poll right")
 
     return can_sends
+
+  # auto brake hold (https://github.com/AlexandreSato/)
+  def create_auto_brake_hold_messages(self, CS: car.CarState, brake_hold_allowed_timer: int = 100):
+    can_sends = []
+    disallowed_gears = [GearShifter.park, GearShifter.reverse]
+    brake_hold_allowed = CS.out.standstill and CS.out.cruiseState.available and not CS.out.gasPressed and \
+                         not CS.out.cruiseState.enabled and (CS.out.gearShifter not in disallowed_gears)
+
+    if brake_hold_allowed:
+      self._brake_hold_counter += 1
+      self.brake_hold_active = self._brake_hold_counter > brake_hold_allowed_timer and not self._brake_hold_reset
+      self._brake_hold_reset = not self._prev_brake_pressed and CS.out.brakePressed and not self._brake_hold_reset
+    else:
+      self._brake_hold_counter = 0
+      self.brake_hold_active = False
+      self._brake_hold_reset = False
+    self._prev_brake_pressed = CS.out.brakePressed
+
+    if self.frame % 2 == 0:
+      can_sends.append(toyotacan.create_brake_hold_command(self.packer, self.frame, CS.pre_collision_2, self.brake_hold_active))
+
+    return can_sends

selfdrive/car/toyota/carstate.py

@@ -57,6 +57,8 @@ class CarState(CarStateBase):
     self.low_speed_lockout = False
     self.acc_type = 1
     self.lkas_hud = {}
+    self.pcm_accel_net = 0.0
+    self.slope_angle = 0.0
 
     self.lkas_enabled = None
     self.prev_lkas_enabled = None
@@ -87,6 +89,10 @@ class CarState(CarStateBase):
     self.prev_accel_profile = None
     self.accel_profile_init = False
     self.toyota_drive_mode = Params().get_bool('ToyotaDriveMode')
+
+    if CP.spFlags & ToyotaFlagsSP.SP_AUTO_BRAKE_HOLD:
+      self.pre_collision_2 = {}
+
     self.frame = 0
 
   def update(self, cp, cp_cam):
@@ -96,6 +102,24 @@ class CarState(CarStateBase):
     self.prev_lkas_enabled = self.lkas_enabled
     self.prev_lta_status = self.lta_status
 
+    # Describes the acceleration request from the PCM if on flat ground, may be higher or lower if pitched
+    # CLUTCH->ACCEL_NET is only accurate for gas, PCM_CRUISE->ACCEL_NET is only accurate for brake
+    # These signals only have meaning when ACC is active
+    if self.CP.flags & ToyotaFlags.RAISED_ACCEL_LIMIT:
+      self.pcm_accel_net = max(cp.vl["CLUTCH"]["ACCEL_NET"], 0.0)
+
+      # Sometimes ACC_BRAKING can be 1 while showing we're applying gas already
+      if cp.vl["PCM_CRUISE"]["ACC_BRAKING"]:
+        self.pcm_accel_net += min(cp.vl["PCM_CRUISE"]["ACCEL_NET"], 0.0)
+
+      # add creeping force at low speeds only for braking, CLUTCH->ACCEL_NET already shows this
+      neutral_accel = max(cp.vl["PCM_CRUISE"]["NEUTRAL_FORCE"] / self.CP.mass, 0.0)
+      if self.pcm_accel_net + neutral_accel < 0.0:
+        self.pcm_accel_net += neutral_accel
+
+    # filtered pitch estimate from the car, negative is a downward slope
+    self.slope_angle = cp.vl["VSC1S07"]["ASLP"] * CV.DEG_TO_RAD
+
     ret.doorOpen = any([cp.vl["BODY_CONTROL_STATE"]["DOOR_OPEN_FL"], cp.vl["BODY_CONTROL_STATE"]["DOOR_OPEN_FR"],
                         cp.vl["BODY_CONTROL_STATE"]["DOOR_OPEN_RL"], cp.vl["BODY_CONTROL_STATE"]["DOOR_OPEN_RR"]])
     ret.seatbeltUnlatched = cp.vl["BODY_CONTROL_STATE"]["SEATBELT_DRIVER_UNLATCHED"] != 0
@@ -186,37 +210,29 @@ class CarState(CarStateBase):
 
     if self.toyota_drive_mode:
       # Determine sport signal based on car model
-      sport_signal = 'SPORT_ON_2' if self.CP.carFingerprint in (CAR.TOYOTA_RAV4_TSS2, CAR.LEXUS_ES_TSS2, CAR.TOYOTA_HIGHLANDER_TSS2) else 'SPORT_ON'
+      sport_signal = 'SPORT_ON_2' if self.CP.carFingerprint in (CAR.TOYOTA_RAV4_TSS2, CAR.LEXUS_ES_TSS2) else 'SPORT_ON'
 
       # Check signals once
       if not self.signals_checked:
         self.signals_checked = True
 
-        # Try to detect sport mode signal, handle missing signal with a fallback
-        try:
-          sport_mode = cp.vl["GEAR_PACKET"][sport_signal]
-          self.sport_signal_seen = True
-        except KeyError:
-          sport_mode = 0
-          self.sport_signal_seen = False
+        # Get sport and eco signals, handling missing signals
+        sport_mode = cp.vl["GEAR_PACKET"].get(sport_signal, 0)
+        eco_mode = cp.vl["GEAR_PACKET"].get('ECON_ON', 0)
 
-        # Try to detect eco mode signal, handle missing signal with a fallback
-        try:
-          eco_mode = cp.vl["GEAR_PACKET"]['ECON_ON']
-          self.eco_signal_seen = True
-        except KeyError:
-          eco_mode = 0
-          self.eco_signal_seen = False
+        # Track if signals were detected
+        self.sport_signal_seen = sport_mode == 1
+        self.eco_signal_seen = eco_mode == 1
       else:
-        # Always re-check the signals to account for mode changes
-        sport_mode = cp.vl["GEAR_PACKET"][sport_signal] if self.sport_signal_seen else 0
-        eco_mode = cp.vl["GEAR_PACKET"]['ECON_ON'] if self.eco_signal_seen else 0
+        # Use previously detected signals if they were seen
+        sport_mode = 1 if self.sport_signal_seen else 0
+        eco_mode = 1 if self.eco_signal_seen else 0
 
-      # Set acceleration profile based on detected modes, with sport mode having higher priority
-      if sport_mode == 1:
-        self.accel_profile = AccelPersonality.sport
-      elif eco_mode == 1:
+      # Set acceleration profile based on detected modes, prioritize eco over sport if both are detected
+      if eco_mode == 1:
         self.accel_profile = AccelPersonality.eco
+      elif sport_mode == 1:
+        self.accel_profile = AccelPersonality.sport
       else:
         self.accel_profile = AccelPersonality.normal
 
@@ -226,8 +242,9 @@ class CarState(CarStateBase):
       if not self.accel_profile_init or self.accel_profile != self.prev_accel_profile:
         Params().put_nonblocking('AccelPersonality', str(self.accel_profile))
         self.accel_profile_init = True
-        # Update the previous profile to prevent unnecessary re-syncing
-        self.prev_accel_profile = self.accel_profile
+
+      # Update the previous profile
+      self.prev_accel_profile = self.accel_profile
 
     if self.CP.carFingerprint != CAR.TOYOTA_MIRAI:
       ret.engineRpm = cp.vl["ENGINE_RPM"]["RPM"]
@@ -313,6 +330,9 @@ class CarState(CarStateBase):
     if self.CP.spFlags & ToyotaFlagsSP.SP_ENHANCED_BSM and self.frame > 199:
       ret.leftBlindspot, ret.rightBlindspot = self.sp_get_enhanced_bsm(cp)
 
+    if self.CP.spFlags & ToyotaFlagsSP.SP_AUTO_BRAKE_HOLD:
+      self.pre_collision_2 = copy.copy(cp_cam.vl["PRE_COLLISION_2"])
+
     self._update_traffic_signals(cp_cam)
     ret.cruiseState.speedLimit = self._calculate_speed_limit()
     self.frame += 1
@@ -443,6 +463,7 @@ class CarState(CarStateBase):
       ("BODY_CONTROL_STATE", 3),
       ("BODY_CONTROL_STATE_2", 2),
       ("ESP_CONTROL", 3),
+      ("VSC1S07", 20),
       ("EPS_STATUS", 25),
       ("BRAKE_MODULE", 40),
       ("WHEEL_SPEEDS", 80),
@@ -452,6 +473,9 @@ class CarState(CarStateBase):
       ("STEER_TORQUE_SENSOR", 50),
     ]
 
+    if CP.flags & ToyotaFlags.RAISED_ACCEL_LIMIT:
+      messages.append(("CLUTCH", 15))
+
     if CP.carFingerprint != CAR.TOYOTA_MIRAI:
       messages.append(("ENGINE_RPM", 42))
 
@@ -516,4 +540,7 @@ class CarState(CarStateBase):
         ("PCS_HUD", 1),
       ]
 
+      if CP.spFlags & ToyotaFlagsSP.SP_AUTO_BRAKE_HOLD:
+        messages.append(("PRE_COLLISION_2", 33))
+
     return CANParser(DBC[CP.carFingerprint]["pt"], messages, 2)

selfdrive/car/toyota/interface.py

@@ -17,7 +17,7 @@ GearShifter = car.CarState.GearShifter
 class CarInterface(CarInterfaceBase):
   @staticmethod
   def get_pid_accel_limits(CP, current_speed, cruise_speed):
-    return CarControllerParams.ACCEL_MIN, CarControllerParams.ACCEL_MAX
+    return CarControllerParams(CP).ACCEL_MIN, CarControllerParams(CP).ACCEL_MAX
 
   @staticmethod
   def _get_params(ret, candidate, fingerprint, car_fw, experimental_long, docs):
@@ -63,6 +63,9 @@ class CarInterface(CarInterfaceBase):
     ret.enableDsu = len(found_ecus) > 0 and Ecu.dsu not in found_ecus and candidate not in (NO_DSU_CAR | UNSUPPORTED_DSU_CAR) \
                                         and not (ret.flags & ToyotaFlags.SMART_DSU)
 
+    if True: # candidate in (CAR.LEXUS_ES_TSS2, CAR.TOYOTA_COROLLA_TSS2, CAR.TOYOTA_PRIUS_TSS2, CAR.LEXUS_RX_TSS2) and Ecu.hybrid not in found_ecus:
+      ret.flags |= ToyotaFlags.RAISED_ACCEL_LIMIT.value
+
     if candidate == CAR.TOYOTA_PRIUS:
       zss = ret.spFlags & ToyotaFlagsSP.SP_ZSS
       stop_and_go = True
@@ -160,30 +163,39 @@ class CarInterface(CarInterfaceBase):
 
     sp_tss2_long_tune = Params().get_bool("ToyotaTSS2Long")
 
-    # Last updated: September 29, 2024
-    def custom_tss2_longitudinal_tuning(): # hand tuned
-      ret.vEgoStopping = 0.25
-      ret.vEgoStarting = 0.01
-      ret.stoppingDecelRate = 0.006
+    # hand tuned (August 12, 2024)
+    def custom_tss2_longitudinal_tuning():
+      ret.vEgoStopping = 0.15
+      ret.vEgoStarting = 0.05
+      ret.stopAccel = -2.0
+      ret.stoppingDecelRate = 0.005  # reach stopping target smoothly
 
-    def default_tss2_longitudinal_tuning(): # stock comma
+    def default_tss2_longitudinal_tuning():
       ret.vEgoStopping = 0.25
-      ret.vEgoStarting = 0.10
-      ret.stoppingDecelRate = 0.007  # reach stopping target smoothly
+      ret.vEgoStarting = 0.25
+      ret.stoppingDecelRate = 0.3  # reach stopping target smoothly
 
-    def default_longitudinal_tuning(): # stock comma
+    def default_longitudinal_tuning():
       tune.kiBP = [0., 5., 35.]
       tune.kiV = [3.6, 2.4, 1.5]
 
     tune = ret.longitudinalTuning
     if candidate in TSS2_CAR or ret.enableGasInterceptorDEPRECATED:
       if sp_tss2_long_tune:
-        tune.kiBP = [0.,  5.,   12.,  20.,  27.,  36.,  40.]
-        tune.kiV = [0.34, 0.234, 0.20, 0.17, 0.105, 0.09, 0.08]
+        #tune.kiBP = [0.,  0.03,  5., 10., 15., 30.]
+        #tune.kiV = [0.1,  0.12, 0.08, 0.06, 0.5, 1.0]
+        #tune.kpBP = [0., 5., 20.]
+        #tune.kpV = [2.3, 1.0, 0.7]
+        tune.kiBP = [0.,  3.,   8.,  20.,  27.,  40.]
+        tune.kiV = [.35,  .24,  .20,  .17,  .10, .06]
         custom_tss2_longitudinal_tuning()
       else:
         tune.kpV = [0.0]
         tune.kiV = [0.5]
+        # Since we compensate for imprecise acceleration in carcontroller, we can be less aggressive with tuning
+        # This also prevents unnecessary request windup due to internal car jerk limits
+        if ret.flags & ToyotaFlags.RAISED_ACCEL_LIMIT:
+          tune.kiV = [0.25]
       if candidate in TSS2_CAR:
         default_tss2_longitudinal_tuning()
     else:
@@ -195,6 +207,9 @@ class CarInterface(CarInterfaceBase):
     if candidate == CAR.TOYOTA_PRIUS_TSS2:
       ret.spFlags |= ToyotaFlagsSP.SP_NEED_DEBUG_BSM.value
 
+    if Params().get_bool("ToyotaAutoHold") and candidate in (TSS2_CAR - RADAR_ACC_CAR):
+      ret.spFlags |= ToyotaFlagsSP.SP_AUTO_BRAKE_HOLD.value
+
     return ret
 
   @staticmethod
@@ -268,6 +283,11 @@ class CarInterface(CarInterfaceBase):
           # while in standstill, send a user alert
           events.add(EventName.manualRestart)
 
+    # auto brake hold
+    if self.CP.spFlags & ToyotaFlagsSP.SP_AUTO_BRAKE_HOLD:
+      if self.CC.brake_hold_active and not ret.brakeHoldActive:
+        events.add(EventName.spAutoBrakeHold)
+
     ret.events = events.to_msg()
 
     return ret

selfdrive/car/toyota/toyotacan.py

@@ -34,14 +34,14 @@ def create_lta_steer_command(packer, steer_control_type, steer_angle, steer_req,
   return packer.make_can_msg("STEERING_LTA", 0, values)
 
 
-def create_accel_command(packer, accel, pcm_cancel, standstill_req, lead, acc_type, fcw_alert, distance, reverse_acc):
+def create_accel_command(packer, accel, pcm_cancel, permit_braking, standstill_req, lead, acc_type, fcw_alert, distance, reverse_acc):
   # TODO: find the exact canceling bit that does not create a chime
   values = {
     "ACCEL_CMD": 0 if pcm_cancel else accel,
     "ACC_TYPE": acc_type,
     "DISTANCE": distance,
     "MINI_CAR": lead,
-    "PERMIT_BRAKING": 1,
+    "PERMIT_BRAKING": permit_braking,
     "RELEASE_STANDSTILL": not standstill_req,
     "CANCEL_REQ": pcm_cancel,
     "ALLOW_LONG_PRESS": reverse_acc,
@@ -130,3 +130,37 @@ def create_set_bsm_debug_mode(lr_blindspot, enabled):
 
 def create_bsm_polling_status(lr_blindspot):
   return make_can_msg(0x750, lr_blindspot + b"\x02\x21\x69\x00\x00\x00\x00", 0)
+
+
+# auto brake hold
+def create_brake_hold_command(packer, frame, pre_collision_2, brake_hold_active):
+  # forward PRE_COLLISION_2 when auto brake hold is not active
+  values = {s: pre_collision_2[s] for s in [
+    "DSS1GDRV",
+    "DS1STAT2",
+    "DS1STBK2",
+    "PCSWAR",
+    "PCSALM",
+    "PCSOPR",
+    "PCSABK",
+    "PBATRGR",
+    "PPTRGR",
+    "IBTRGR",
+    "CLEXTRGR",
+    "IRLT_REQ",
+    "BRKHLD",
+    "AVSTRGR",
+    "VGRSTRGR",
+    "PREFILL",
+    "PBRTRGR",
+    "PCSDIS",
+    "PBPREPMP",
+  ]}
+
+  if brake_hold_active:
+    values = {
+      "DSS1GDRV": 0x3FF,
+      "PBRTRGR": frame % 730 < 727,  # cut actuation for 3 frames
+    }
+
+  return packer.make_can_msg("PRE_COLLISION_2", 0, values)

selfdrive/car/toyota/values.py

@@ -16,9 +16,6 @@ PEDAL_TRANSITION = 10. * CV.MPH_TO_MS
 
 
 class CarControllerParams:
-  ACCEL_MAX = 1.5  # m/s2, lower than allowed 2.0 m/s2 for tuning reasons
-  ACCEL_MIN = -3.5  # m/s2
-
   STEER_STEP = 1
   STEER_MAX = 1500
   STEER_ERROR_MAX = 350     # max delta between torque cmd and torque motor
@@ -33,6 +30,12 @@ class CarControllerParams:
   ANGLE_RATE_LIMIT_DOWN = AngleRateLimit(speed_bp=[5, 25], angle_v=[0.36, 0.26])
 
   def __init__(self, CP):
+    if CP.flags & ToyotaFlags.RAISED_ACCEL_LIMIT:
+      self.ACCEL_MAX = 2.0
+    else:
+      self.ACCEL_MAX = 1.5  # m/s2, lower than allowed 2.0 m/s^2 for tuning reasons
+    self.ACCEL_MIN = -3.5  # m/s2
+
     if CP.lateralTuning.which == 'torque':
       self.STEER_DELTA_UP = 15       # 1.0s time to peak torque
       self.STEER_DELTA_DOWN = 25     # always lower than 45 otherwise the Rav4 faults (Prius seems ok with 50)
@@ -58,12 +61,15 @@ class ToyotaFlags(IntFlag):
   NO_STOP_TIMER = 256
   # these cars are speculated to allow stop and go when the DSU is unplugged or disabled with sDSU
   SNG_WITHOUT_DSU = 512
+  # these cars can utilize 2.0 m/s^2
+  RAISED_ACCEL_LIMIT = 1024
 
 
 class ToyotaFlagsSP(IntFlag):
   SP_ZSS = 1
   SP_ENHANCED_BSM = 2
   SP_NEED_DEBUG_BSM = 4
+  SP_AUTO_BRAKE_HOLD = 8
 
 
 class Footnote(Enum):

selfdrive/controls/lib/events.py

@@ -744,6 +744,14 @@ EVENTS: dict[int, dict[str, Alert | AlertCallbackType]] = {
     ET.NO_ENTRY: NoEntryAlert("Brake Hold Active"),
   },
 
+  EventName.spAutoBrakeHold: {
+    ET.PERMANENT: Alert(
+      "sunnypilot Brake Hold Active",
+      "",
+      AlertStatus.normal, AlertSize.small,
+      Priority.LOWEST, VisualAlert.none, AudibleAlert.prompt, 0.),
+  },
+
   EventName.parkBrake: {
     ET.USER_DISABLE: EngagementAlert(AudibleAlert.disengage),
     ET.NO_ENTRY: NoEntryAlert("Parking Brake Engaged"),

selfdrive/controls/lib/longitudinal_mpc_lib/long_mpc.py

@@ -63,9 +63,9 @@ def get_jerk_factor(personality=custom.LongitudinalPersonalitySP.standard):
   elif personality==custom.LongitudinalPersonalitySP.standard:
     return 1.0
   elif personality==custom.LongitudinalPersonalitySP.moderate:
-    return 0.9
+    return 0.5
   elif personality==custom.LongitudinalPersonalitySP.aggressive:
-    return 0.8
+    return 0.2
   elif personality==custom.LongitudinalPersonalitySP.overtake:
     return 0.1
   else:
@@ -74,37 +74,36 @@ def get_jerk_factor(personality=custom.LongitudinalPersonalitySP.standard):
 
 def get_T_FOLLOW(personality=custom.LongitudinalPersonalitySP.standard):
   if personality==custom.LongitudinalPersonalitySP.relaxed:
-    return 1.75
+    return 1.80
   elif personality==custom.LongitudinalPersonalitySP.standard:
-    return 1.45
+    return 1.55
   elif personality==custom.LongitudinalPersonalitySP.moderate:
-    return 1.25
+    return 1.35
   elif personality==custom.LongitudinalPersonalitySP.aggressive:
-    return 1.0
+    return 1.20
   elif personality==custom.LongitudinalPersonalitySP.overtake:
     return 0.25
   else:
     raise NotImplementedError("Longitudinal personality not supported")
 
-# Last updated: September 29, 2024
+
 def get_dynamic_personality(v_ego, personality=custom.LongitudinalPersonalitySP.standard):
   if personality==custom.LongitudinalPersonalitySP.relaxed:
-    x_vel =  [0,    14.,   27.7]
-    y_dist = [1.75, 1.75,  2.00]
+    x_vel =  [0,    5.,   5.01, 8.33,  8.34,  27.69, 27.7]
+    y_dist = [0.0,  1.2,  1.7,  1.7,   1.75,  1.75,  1.83]
   elif personality==custom.LongitudinalPersonalitySP.standard:
-    x_vel =  [0,    14.,   27.7]
-    y_dist = [1.75, 1.75,  1.70]
+    x_vel =  [0,    5.0,  5.01, 8.33,  8.34,  27.69, 27.7]
+    y_dist = [0.0,  1.6,  1.6,  1.6,   1.75,  1.75,  1.80]
   elif personality==custom.LongitudinalPersonalitySP.moderate:
-    x_vel =  [0,    14.,   27.7]
-    y_dist = [1.45, 1.45,  1.48]
+    x_vel =  [0,    5.,   5.01, 8.33,  8.34,  27.69, 27.7]
+    y_dist = [0.0,  1.4,  1.4,  1.4,   1.45,  1.45,  1.50]
   elif personality==custom.LongitudinalPersonalitySP.aggressive:
-    x_vel =  [0,    14.,   27.7]
-    y_dist = [1.25, 1.25,  1.28]
+    x_vel =  [0,    5.,   5.01,  17.0, 17.01, 27.69, 27.7]
+    y_dist = [0.0,  1.2,  1.2,   1.2,  1.25,  1.25,  1.3]
   else:
     raise NotImplementedError("Dynamic personality not supported")
   return np.interp(v_ego, x_vel, y_dist)
 
-
 def get_stopped_equivalence_factor(v_lead):
   return (v_lead**2) / (2 * COMFORT_BRAKE)
 

selfdrive/controls/lib/sunnypilot/accel_controller.py

@@ -21,7 +21,7 @@
 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 # THE SOFTWARE.
 
-# Last updated: September 29, 2024
+# Last updated: August 12, 2024
 
 from cereal import custom
 from openpilot.common.numpy_fast import interp
@@ -29,15 +29,22 @@ from openpilot.common.numpy_fast import interp
 AccelPersonality = custom.AccelerationPersonality
 
 # accel personality by @arne182 modified by cgw and kumar
-_DP_CRUISE_MIN_V =       [-1.0, -1.0,  -0.88]
-_DP_CRUISE_MIN_V_ECO =   [-1.0, -1.0,  -0.76]
-_DP_CRUISE_MIN_V_SPORT = [-1.0, -1.0,  -1.0]
-_DP_CRUISE_MIN_BP =      [0.,   11.1,  20.]
+_DP_CRUISE_MIN_V =       [-0.12, -0.12, -0.08, -0.08, -0.14, -0.14, -0.16, -0.16, -0.24, -0.24, -1.0,  -1.0,  -1.15]
+_DP_CRUISE_MIN_V_ECO =   [-0.11, -0.11, -0.07, -0.07, -0.13, -0.13, -0.15, -0.15, -0.23, -0.23, -1.0,  -1.0,  -1.10]
+_DP_CRUISE_MIN_V_SPORT = [-0.13, -0.13, -0.09, -0.09, -0.15, -0.15, -0.17, -0.17, -0.25, -0.25, -1.0,  -1.0,  -1.20]
+_DP_CRUISE_MIN_BP =      [0.,     0.08,  0.09, 2.77,  2.78,  8.33,  8.34,  13.88, 13.89, 19.44, 25.01, 30.55, 30.56]
+#_DP_CRUISE_MIN_BP in kph[0.,     0.3,   0.3,  10,    10,    30,    30,    50,    50,    70,    90,    110,   >110]
+
+#_DP_CRUISE_MIN_V =       [-1.0, -0.88]
+#_DP_CRUISE_MIN_V_ECO =   [-1.0, -0.76]
+#_DP_CRUISE_MIN_V_SPORT = [-1.0, -1.0]
+#_DP_CRUISE_MIN_BP =      [0., 40.]
+
+_DP_CRUISE_MAX_V =       [2.0, 2.0,  1.75, 0.96, .65,  .53,  .38,  .17]
+_DP_CRUISE_MAX_V_ECO =   [2.0, 1.98, 1.67, 0.92, .58,  .47,  .32,  .09]
+_DP_CRUISE_MAX_V_SPORT = [2.0, 2.0,  1.95, 1.15, .84,  .70,  .50,  .30]
+_DP_CRUISE_MAX_BP =      [0.,  6.0,  8.,   11.,  20.,  25.,  30.,  40.]
 
-_DP_CRUISE_MAX_V =       [2.0, 2.0, 2.0, 1.75, 1.03, .72,  .53,  .42,  .13]
-_DP_CRUISE_MAX_V_ECO =   [2.0, 2.0, 2.0, 1.50, 0.92, .54,  .43,  .32,  .088]
-_DP_CRUISE_MAX_V_SPORT = [2.0, 2.0, 2.0, 2.00, 1.25, .96,  .78,  .60,  .4]
-_DP_CRUISE_MAX_BP =      [0.,  1.,  6.,  8.,   11.,  20.,  25.,  30.,  55.]
 
 
 class AccelController:

selfdrive/controls/lib/sunnypilot/dynamic_experimental_controller.py

@@ -21,7 +21,7 @@
 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 # THE SOFTWARE.
 #
-# Version = 2024-9-28
+# Version = 2024-7-11
 from common.numpy_fast import interp
 import numpy as np
 
@@ -376,4 +376,4 @@ class DynamicExperimentalController:
         self._set_mode_timeout = SET_MODE_TIMEOUT
 
     if self._set_mode_timeout > 0:
-      self._set_mode_timeout -= 1
+      self._set_mode_timeout -= 1

selfdrive/ui/sunnypilot/qt/offroad/settings/vehicle_settings.cc

@@ -159,6 +159,18 @@ SPVehiclesTogglesPanel::SPVehiclesTogglesPanel(VehiclePanel *parent) : ListWidge
   toyotaTss2LongTune->setConfirmation(true, false);
   addItem(toyotaTss2LongTune);
 
+  auto toyotaAbh = new ParamControlSP(
+    "ToyotaAutoHold",
+    tr("Enable Automatic Brake Hold (AHB)"),
+    QString("<b>%1</b><br><br>%2<br><br><b>%3</b>")
+    .arg(tr("WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK."))
+    .arg(tr("When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold."))
+    .arg(tr("Changing this setting takes effect when the car is powered off.")),
+    "../assets/offroad/icon_blank.png"
+  );
+  toyotaAbh->setConfirmation(true, false);
+  addItem(toyotaAbh);
+
   toyotaEnhancedBsm = new ParamControlSP(
     "ToyotaEnhancedBsm",
     tr("Enable Enhanced Blind Spot Monitor"),
@@ -215,6 +227,7 @@ SPVehiclesTogglesPanel::SPVehiclesTogglesPanel(VehiclePanel *parent) : ListWidge
     hkgCustomLongTuning->setEnabled(offroad);
     hyundaiCruiseMainDefault->setEnabled(offroad);
     toyotaTss2LongTune->setEnabled(offroad);
+    toyotaAbh->setEnabled(offroad);
     toyotaEnhancedBsm->setEnabled(offroad);
     toyotaSngHack->setEnabled(offroad);
     volkswagenCCOnly->setEnabled(offroad);

selfdrive/ui/sunnypilot/qt/onroad/annotated_camera.cc

@@ -216,6 +216,7 @@ void AnnotatedCameraWidgetSP::updateState(const UIStateSP &s) {
   latAccelFactorFiltered = ltp.getLatAccelFactorFiltered();
   frictionCoefficientFiltered = ltp.getFrictionCoefficientFiltered();
   liveValid = ltp.getLiveValid();
+  ecoMode = vEgo > 0 && car_state.getEngineRpm() == 0;
   // ############################## DEV UI END ##############################
 
   btnPerc = s.scene.sleep_btn_opacity * 0.05;
@@ -523,10 +524,32 @@ void AnnotatedCameraWidgetSP::drawHud(QPainter &p) {
 
   // current speed
   if (!hideVEgoUi) {
+    // Set up the font for the speed text
     p.setFont(InterFont(176, QFont::Bold));
-    drawColoredText(p, rect().center().x(), 210, speedStr, brakeLights ? QColor(0xff, 0, 0, 255) : QColor(0xff, 0xff, 0xff, 255));
+
+    // Define text coordinates
+    int centerX = rect().center().x();
+    int centerY = 210;
+
+    // Draw a red border if brakeLights is active
+    if (brakeLights) {
+      for (int offsetX = -6; offsetX <= 6; offsetX++) {
+        for (int offsetY = -6; offsetY <= 6; offsetY++) {
+          // Avoid drawing at the original text position
+          if (offsetX != 0 || offsetY != 0) {
+            drawColoredText(p, centerX + offsetX, centerY + offsetY, speedStr, QColor(255, 0, 0, 255)); // Red border
+          }
+        }
+      }
+    }
+
+    // Draw the main speed text: green if ecoMode is on, otherwise white
+    QColor speedTextColor = ecoMode ? QColor(0, 245, 0) : QColor(255, 255, 255, 255);
+    drawColoredText(p, centerX, centerY, speedStr, speedTextColor);
+
+    // Draw the speed unit below the main text
     p.setFont(InterFont(66));
-    drawText(p, rect().center().x(), 290, speedUnit, 200);
+    drawText(p, centerX, 290, speedUnit, 200);
   }
 
   if (!reversing) {
@@ -1165,7 +1188,7 @@ void AnnotatedCameraWidgetSP::drawLaneLines(QPainter &painter, const UIStateSP *
   }
 
   // TODO: Fix empty spaces when curiving back on itself
-  painter.setBrush(QColor::fromRgbF(1.0, 0.0, 0.0, 0.2));
+  painter.setBrush(QColor::fromRgbF(1.0, 0.0, 0.0, 0.4));
   if (left_blindspot) painter.drawPolygon(scene.lane_barrier_vertices[0]);
   if (right_blindspot) painter.drawPolygon(scene.lane_barrier_vertices[1]);
 

selfdrive/ui/sunnypilot/qt/onroad/annotated_camera.h

@@ -176,6 +176,7 @@ private:
   float latAccelFactorFiltered;
   float frictionCoefficientFiltered;
   bool liveValid;
+  bool ecoMode;
   // ############################## DEV UI END ##############################
 
   float btnPerc;

selfdrive/ui/translations/main_ar.ts

@@ -203,6 +203,14 @@
         <source>mph</source>
         <translation type="unfinished">ميل/س</translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>MAX</source>
         <translation type="unfinished">MAX</translation>
@@ -1466,11 +1474,15 @@ This may take up to a minute.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
+        <source>HKG CAN: Enable Cruise Main By Default</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -1517,6 +1529,22 @@ This may take up to a minute.</source>
         <source>Smoother longitudinal performance for Toyota/Lexus TSS2/LSS2 cars. Big thanks to dragonpilot-community for this implementation.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Enhanced Blind Spot Monitor</source>
         <translation type="unfinished"></translation>
@@ -1583,14 +1611,6 @@ Reboot Required.</source>
         <source>Tested on RAV4 TSS1, Lexus LSS1, Toyota TSS1/1.5, and Prius TSS2.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Enable Cruise Main By Default</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2517,6 +2537,14 @@ Reboot Required.</source>
         <source>Neural Network Lateral Control (NNLC)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enforce Torque Lateral Control</source>
         <translation type="unfinished"></translation>
@@ -2525,6 +2553,14 @@ Reboot Required.</source>
         <source>Enable this to enforce sunnypilot to steer with Torque lateral control.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Self-Tune</source>
         <translation type="unfinished"></translation>
@@ -2910,6 +2946,10 @@ Reboot Required.</source>
 This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Experimental Mode</source>
         <translation type="unfinished">الوضع التجريبي</translation>
@@ -3277,6 +3317,14 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Speed</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Time</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Display Metrics Below Chevron</source>
         <translation type="unfinished"></translation>
@@ -3305,14 +3353,6 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Display Temperature on Sidebar</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Time</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>All</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WiFiPromptWidget</name>

selfdrive/ui/translations/main_de.ts

@@ -203,6 +203,14 @@
         <source>mph</source>
         <translation type="unfinished">mph</translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>MAX</source>
         <translation type="unfinished">MAX</translation>
@@ -1448,11 +1456,15 @@ This may take up to a minute.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
+        <source>HKG CAN: Enable Cruise Main By Default</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -1499,6 +1511,22 @@ This may take up to a minute.</source>
         <source>Smoother longitudinal performance for Toyota/Lexus TSS2/LSS2 cars. Big thanks to dragonpilot-community for this implementation.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Enhanced Blind Spot Monitor</source>
         <translation type="unfinished"></translation>
@@ -1565,14 +1593,6 @@ Reboot Required.</source>
         <source>Tested on RAV4 TSS1, Lexus LSS1, Toyota TSS1/1.5, and Prius TSS2.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Enable Cruise Main By Default</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2501,6 +2521,14 @@ Reboot Required.</source>
         <source>Neural Network Lateral Control (NNLC)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enforce Torque Lateral Control</source>
         <translation type="unfinished"></translation>
@@ -2509,6 +2537,14 @@ Reboot Required.</source>
         <source>Enable this to enforce sunnypilot to steer with Torque lateral control.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Self-Tune</source>
         <translation type="unfinished"></translation>
@@ -2896,6 +2932,10 @@ Reboot Required.</source>
 This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Experimental Mode</source>
         <translation type="unfinished">Experimenteller Modus</translation>
@@ -3263,6 +3303,14 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Speed</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Time</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Display Metrics Below Chevron</source>
         <translation type="unfinished"></translation>
@@ -3291,14 +3339,6 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Display Temperature on Sidebar</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Time</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>All</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WiFiPromptWidget</name>

selfdrive/ui/translations/main_es.ts

@@ -207,6 +207,14 @@
         <source>LIMIT</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>AutoLaneChangeTimer</name>
@@ -1445,14 +1453,6 @@ Esto puede tardar un minuto.</translation>
         <source>Hyundai/Kia/Genesis</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Subaru</source>
         <translation type="unfinished"></translation>
@@ -1571,6 +1571,26 @@ Reboot Required.</source>
         <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2677,6 +2697,22 @@ Reboot Required.</source>
         <source>Default is Laneless. In Auto mode, sunnnypilot dynamically chooses between Laneline or Laneless model based on lane recognition confidence level on road and certain conditions.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TermsPage</name>
@@ -3042,6 +3078,10 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Enable the sunnypilot longitudinal control (alpha) toggle to allow Experimental mode.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TorqueFriction</name>

selfdrive/ui/translations/main_fr.ts

@@ -203,6 +203,14 @@
         <source>mph</source>
         <translation type="unfinished">mi/h</translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>MAX</source>
         <translation type="unfinished">MAX</translation>
@@ -1450,11 +1458,15 @@ Cela peut prendre jusqu&apos;à une minute.</translation>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
+        <source>HKG CAN: Enable Cruise Main By Default</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -1501,6 +1513,22 @@ Cela peut prendre jusqu&apos;à une minute.</translation>
         <source>Smoother longitudinal performance for Toyota/Lexus TSS2/LSS2 cars. Big thanks to dragonpilot-community for this implementation.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Enhanced Blind Spot Monitor</source>
         <translation type="unfinished"></translation>
@@ -1567,14 +1595,6 @@ Reboot Required.</source>
         <source>Tested on RAV4 TSS1, Lexus LSS1, Toyota TSS1/1.5, and Prius TSS2.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Enable Cruise Main By Default</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2501,6 +2521,14 @@ Reboot Required.</source>
         <source>Neural Network Lateral Control (NNLC)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enforce Torque Lateral Control</source>
         <translation type="unfinished"></translation>
@@ -2509,6 +2537,14 @@ Reboot Required.</source>
         <source>Enable this to enforce sunnypilot to steer with Torque lateral control.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Self-Tune</source>
         <translation type="unfinished"></translation>
@@ -2894,6 +2930,10 @@ Reboot Required.</source>
 This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Experimental Mode</source>
         <translation type="unfinished">Mode expérimental</translation>
@@ -3261,6 +3301,14 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Speed</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Time</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Display Metrics Below Chevron</source>
         <translation type="unfinished"></translation>
@@ -3289,14 +3337,6 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Display Temperature on Sidebar</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Time</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>All</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WiFiPromptWidget</name>

selfdrive/ui/translations/main_ja.ts

@@ -203,6 +203,14 @@
         <source>mph</source>
         <translation type="unfinished">mph</translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>MAX</source>
         <translation type="unfinished">最高速度</translation>
@@ -1444,11 +1452,15 @@ This may take up to a minute.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
+        <source>HKG CAN: Enable Cruise Main By Default</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -1495,6 +1507,22 @@ This may take up to a minute.</source>
         <source>Smoother longitudinal performance for Toyota/Lexus TSS2/LSS2 cars. Big thanks to dragonpilot-community for this implementation.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Enhanced Blind Spot Monitor</source>
         <translation type="unfinished"></translation>
@@ -1561,14 +1589,6 @@ Reboot Required.</source>
         <source>Tested on RAV4 TSS1, Lexus LSS1, Toyota TSS1/1.5, and Prius TSS2.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Enable Cruise Main By Default</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2495,6 +2515,14 @@ Reboot Required.</source>
         <source>Neural Network Lateral Control (NNLC)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enforce Torque Lateral Control</source>
         <translation type="unfinished"></translation>
@@ -2503,6 +2531,14 @@ Reboot Required.</source>
         <source>Enable this to enforce sunnypilot to steer with Torque lateral control.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Self-Tune</source>
         <translation type="unfinished"></translation>
@@ -2888,6 +2924,10 @@ Reboot Required.</source>
 This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Experimental Mode</source>
         <translation type="unfinished">実験モード</translation>
@@ -3255,6 +3295,14 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Speed</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Time</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Display Metrics Below Chevron</source>
         <translation type="unfinished"></translation>
@@ -3283,14 +3331,6 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Display Temperature on Sidebar</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Time</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>All</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WiFiPromptWidget</name>

selfdrive/ui/translations/main_ko.ts

@@ -203,6 +203,14 @@
         <source>mph</source>
         <translation type="unfinished">mph</translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>MAX</source>
         <translation type="unfinished">MAX</translation>
@@ -1446,11 +1454,15 @@ This may take up to a minute.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
+        <source>HKG CAN: Enable Cruise Main By Default</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -1497,6 +1509,22 @@ This may take up to a minute.</source>
         <source>Smoother longitudinal performance for Toyota/Lexus TSS2/LSS2 cars. Big thanks to dragonpilot-community for this implementation.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Enhanced Blind Spot Monitor</source>
         <translation type="unfinished"></translation>
@@ -1563,14 +1591,6 @@ Reboot Required.</source>
         <source>Tested on RAV4 TSS1, Lexus LSS1, Toyota TSS1/1.5, and Prius TSS2.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Enable Cruise Main By Default</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2497,6 +2517,14 @@ Reboot Required.</source>
         <source>Neural Network Lateral Control (NNLC)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enforce Torque Lateral Control</source>
         <translation type="unfinished"></translation>
@@ -2505,6 +2533,14 @@ Reboot Required.</source>
         <source>Enable this to enforce sunnypilot to steer with Torque lateral control.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Self-Tune</source>
         <translation type="unfinished"></translation>
@@ -2890,6 +2926,10 @@ Reboot Required.</source>
 This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Experimental Mode</source>
         <translation type="unfinished">실험 모드</translation>
@@ -3257,6 +3297,14 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Speed</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Time</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Display Metrics Below Chevron</source>
         <translation type="unfinished"></translation>
@@ -3285,14 +3333,6 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Display Temperature on Sidebar</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Time</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>All</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WiFiPromptWidget</name>

selfdrive/ui/translations/main_pt-BR.ts

@@ -203,6 +203,14 @@
         <source>mph</source>
         <translation type="unfinished">mph</translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>MAX</source>
         <translation type="unfinished">LIMITE</translation>
@@ -1450,11 +1458,15 @@ Isso pode levar até um minuto.</translation>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
+        <source>HKG CAN: Enable Cruise Main By Default</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -1501,6 +1513,22 @@ Isso pode levar até um minuto.</translation>
         <source>Smoother longitudinal performance for Toyota/Lexus TSS2/LSS2 cars. Big thanks to dragonpilot-community for this implementation.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Enhanced Blind Spot Monitor</source>
         <translation type="unfinished"></translation>
@@ -1567,14 +1595,6 @@ Reboot Required.</source>
         <source>Tested on RAV4 TSS1, Lexus LSS1, Toyota TSS1/1.5, and Prius TSS2.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Enable Cruise Main By Default</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2501,6 +2521,14 @@ Reboot Required.</source>
         <source>Neural Network Lateral Control (NNLC)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enforce Torque Lateral Control</source>
         <translation type="unfinished"></translation>
@@ -2509,6 +2537,14 @@ Reboot Required.</source>
         <source>Enable this to enforce sunnypilot to steer with Torque lateral control.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Self-Tune</source>
         <translation type="unfinished"></translation>
@@ -2894,6 +2930,10 @@ Reboot Required.</source>
 This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Experimental Mode</source>
         <translation type="unfinished">Modo Experimental</translation>
@@ -3261,6 +3301,14 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Speed</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Time</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Display Metrics Below Chevron</source>
         <translation type="unfinished"></translation>
@@ -3289,14 +3337,6 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Display Temperature on Sidebar</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Time</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>All</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WiFiPromptWidget</name>

selfdrive/ui/translations/main_th.ts

@@ -203,6 +203,14 @@
         <source>mph</source>
         <translation type="unfinished">ไมล์/ชม.</translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>MAX</source>
         <translation type="unfinished">สูงสุด</translation>
@@ -1446,11 +1454,15 @@ This may take up to a minute.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
+        <source>HKG CAN: Enable Cruise Main By Default</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -1497,6 +1509,22 @@ This may take up to a minute.</source>
         <source>Smoother longitudinal performance for Toyota/Lexus TSS2/LSS2 cars. Big thanks to dragonpilot-community for this implementation.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Enhanced Blind Spot Monitor</source>
         <translation type="unfinished"></translation>
@@ -1563,14 +1591,6 @@ Reboot Required.</source>
         <source>Tested on RAV4 TSS1, Lexus LSS1, Toyota TSS1/1.5, and Prius TSS2.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Enable Cruise Main By Default</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2497,6 +2517,14 @@ Reboot Required.</source>
         <source>Neural Network Lateral Control (NNLC)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enforce Torque Lateral Control</source>
         <translation type="unfinished"></translation>
@@ -2505,6 +2533,14 @@ Reboot Required.</source>
         <source>Enable this to enforce sunnypilot to steer with Torque lateral control.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Self-Tune</source>
         <translation type="unfinished"></translation>
@@ -2890,6 +2926,10 @@ Reboot Required.</source>
 This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Experimental Mode</source>
         <translation type="unfinished">โหมดทดลอง</translation>
@@ -3257,6 +3297,14 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Speed</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Time</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Display Metrics Below Chevron</source>
         <translation type="unfinished"></translation>
@@ -3285,14 +3333,6 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Display Temperature on Sidebar</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Time</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>All</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WiFiPromptWidget</name>

selfdrive/ui/translations/main_tr.ts

@@ -203,6 +203,14 @@
         <source>mph</source>
         <translation type="unfinished">mph</translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>MAX</source>
         <translation type="unfinished">MAX</translation>
@@ -1444,11 +1452,15 @@ This may take up to a minute.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
+        <source>HKG CAN: Enable Cruise Main By Default</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -1495,6 +1507,22 @@ This may take up to a minute.</source>
         <source>Smoother longitudinal performance for Toyota/Lexus TSS2/LSS2 cars. Big thanks to dragonpilot-community for this implementation.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Enhanced Blind Spot Monitor</source>
         <translation type="unfinished"></translation>
@@ -1561,14 +1589,6 @@ Reboot Required.</source>
         <source>Tested on RAV4 TSS1, Lexus LSS1, Toyota TSS1/1.5, and Prius TSS2.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Enable Cruise Main By Default</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2495,6 +2515,14 @@ Reboot Required.</source>
         <source>Neural Network Lateral Control (NNLC)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enforce Torque Lateral Control</source>
         <translation type="unfinished"></translation>
@@ -2503,6 +2531,14 @@ Reboot Required.</source>
         <source>Enable this to enforce sunnypilot to steer with Torque lateral control.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Self-Tune</source>
         <translation type="unfinished"></translation>
@@ -2888,6 +2924,10 @@ Reboot Required.</source>
 This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Experimental Mode</source>
         <translation type="unfinished"></translation>
@@ -3255,6 +3295,14 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Speed</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Time</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Display Metrics Below Chevron</source>
         <translation type="unfinished"></translation>
@@ -3283,14 +3331,6 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Display Temperature on Sidebar</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Time</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>All</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WiFiPromptWidget</name>

selfdrive/ui/translations/main_zh-CHS.ts

@@ -203,6 +203,14 @@
         <source>mph</source>
         <translation type="unfinished">mph</translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>MAX</source>
         <translation type="unfinished">最高定速</translation>
@@ -1446,11 +1454,15 @@ This may take up to a minute.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
+        <source>HKG CAN: Enable Cruise Main By Default</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -1497,6 +1509,22 @@ This may take up to a minute.</source>
         <source>Smoother longitudinal performance for Toyota/Lexus TSS2/LSS2 cars. Big thanks to dragonpilot-community for this implementation.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Enhanced Blind Spot Monitor</source>
         <translation type="unfinished"></translation>
@@ -1563,14 +1591,6 @@ Reboot Required.</source>
         <source>Tested on RAV4 TSS1, Lexus LSS1, Toyota TSS1/1.5, and Prius TSS2.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Enable Cruise Main By Default</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2497,6 +2517,14 @@ Reboot Required.</source>
         <source>Neural Network Lateral Control (NNLC)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enforce Torque Lateral Control</source>
         <translation type="unfinished"></translation>
@@ -2505,6 +2533,14 @@ Reboot Required.</source>
         <source>Enable this to enforce sunnypilot to steer with Torque lateral control.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Self-Tune</source>
         <translation type="unfinished"></translation>
@@ -2890,6 +2926,10 @@ Reboot Required.</source>
 This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Experimental Mode</source>
         <translation type="unfinished">测试模式</translation>
@@ -3257,6 +3297,14 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Speed</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Time</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Display Metrics Below Chevron</source>
         <translation type="unfinished"></translation>
@@ -3285,14 +3333,6 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Display Temperature on Sidebar</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Time</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>All</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WiFiPromptWidget</name>

selfdrive/ui/translations/main_zh-CHT.ts

@@ -203,6 +203,14 @@
         <source>mph</source>
         <translation type="unfinished">mph</translation>
     </message>
+    <message>
+        <source>blended</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>acc</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>MAX</source>
         <translation type="unfinished">最高</translation>
@@ -1446,11 +1454,15 @@ This may take up to a minute.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>HKG CAN: Smoother Stopping Performance (Beta)</source>
+        <source>HKG: Custom Tuning for New Longitudinal API</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Smoother stopping behind a stopped car or desired stopping event. This is only applicable to HKG CAN platforms using openpilot longitudinal control.</source>
+        <source>HKG CAN: Enable Cruise Main By Default</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -1497,6 +1509,22 @@ This may take up to a minute.</source>
         <source>Smoother longitudinal performance for Toyota/Lexus TSS2/LSS2 cars. Big thanks to dragonpilot-community for this implementation.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Enable Automatic Brake Hold (AHB)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>WARNING: Only for Toyota/Lexus vehicles with TSS2/LSS2. USE AT YOUR OWN RISK.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When you stop the vehicle completely by depressing the brake pedal, sunnypilot will activate Auto Brake Hold.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Changing this setting takes effect when the car is powered off.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Enhanced Blind Spot Monitor</source>
         <translation type="unfinished"></translation>
@@ -1563,14 +1591,6 @@ Reboot Required.</source>
         <source>Tested on RAV4 TSS1, Lexus LSS1, Toyota TSS1/1.5, and Prius TSS2.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>HKG CAN: Enable Cruise Main By Default</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Enabling this toggle sets CRUISE MAIN to ON by default when the car starts, without engaging MADS. The user still needs to manually engage MADS</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>SettingsWindow</name>
@@ -2497,6 +2517,14 @@ Reboot Required.</source>
         <source>Neural Network Lateral Control (NNLC)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>NNLC: Remove Lateral Jerk Response (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>When NNLC is active, enable this to disables the use of lateral jerk in steering torque calculations, focusing solely on lateral acceleration for a simplified control response.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enforce Torque Lateral Control</source>
         <translation type="unfinished"></translation>
@@ -2505,6 +2533,14 @@ Reboot Required.</source>
         <source>Enable this to enforce sunnypilot to steer with Torque lateral control.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Lateral Jerk with Torque Lateral Control (Alpha)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Utilizes limited lateral jerk control for improved steering response, leveraging stock torque lateral controller capabilities. Designed to mimic NNLC behavior without training models or data collection.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Enable Self-Tune</source>
         <translation type="unfinished"></translation>
@@ -2890,6 +2926,10 @@ Reboot Required.</source>
 This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use Planner Speed</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Experimental Mode</source>
         <translation type="unfinished">實驗模式</translation>
@@ -3257,6 +3297,14 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Speed</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Time</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Display Metrics Below Chevron</source>
         <translation type="unfinished"></translation>
@@ -3285,14 +3333,6 @@ This feature must be used along with SLC, and/or V-TSC, and/or M-TSC.</source>
         <source>Display Temperature on Sidebar</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Time</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>All</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WiFiPromptWidget</name>

selfdrive/ui/ui.cc

@@ -326,7 +326,7 @@ void Device::resetInteractiveTimeout(int timeout) {
 
 void Device::updateBrightness(const UIState &s) {
   clipped_brightness = offroad_brightness;
-  if (s.scene.started && s.scene.light_sensor >= 0) {
+  if (s.scene.started && s.scene.light_sensor > 0) {
     clipped_brightness = s.scene.light_sensor;
 
     // CIE 1931 - https://www.photonstophotos.net/GeneralTopics/Exposure/Psychometric_Lightness_and_Gamma.htm
@@ -337,7 +337,7 @@ void Device::updateBrightness(const UIState &s) {
     }
 
     // Scale back to 10% to 100%
-    clipped_brightness = std::clamp(100.0f * clipped_brightness, 5.0f, 100.0f);
+    clipped_brightness = std::clamp(100.0f * clipped_brightness, 10.0f, 100.0f);
   }
   RETURN_IF_SUNNYPILOT
   
@@ -377,4 +377,4 @@ Device *device() {
   static Device _device;
   return &_device;
 }
-#endif
+#endif

system/athena/sunnylinkd.py

@@ -45,7 +45,7 @@ def handle_long_poll(ws: WebSocket, exit_event: threading.Event | None) -> None:
     threading.Thread(target=ws_ping, args=(ws, end_event), name='ws_ping'),
     threading.Thread(target=ws_queue, args=(end_event,), name='ws_queue'),
     # threading.Thread(target=upload_handler, args=(end_event,), name='upload_handler'),
-    threading.Thread(target=sunny_log_handler, args=(end_event, comma_prime_cellular_end_event), name='log_handler'),
+    # threading.Thread(target=sunny_log_handler, args=(end_event, comma_prime_cellular_end_event), name='log_handler'),
     # threading.Thread(target=stat_handler, args=(end_event,), name='stat_handler'),
   ] + [
     threading.Thread(target=jsonrpc_handler, args=(end_event,), name=f'worker_{x}')

system/manager/manager.py

@@ -104,6 +104,7 @@ def manager_init() -> None:
     ("TorqueDeadzoneDeg", "0"),
     ("TorqueFriction", "10"),
     ("TorqueMaxLatAccel", "250"),
+    ("ToyotaAutoHold", "0"),
     ("ToyotaAutoLockBySpeed", "0"),
     ("ToyotaAutoUnlockByShifter", "0"),
     ("ToyotaDriveMode", "0"),

system/sentry.py

@@ -19,9 +19,9 @@ from openpilot.system.version import get_build_metadata, get_version
 
 class SentryProject(Enum):
   # python project
-  SELFDRIVE = "https://3e25e235efe389b74cde72fb0e115aef@o1138119.ingest.us.sentry.io/4509950385979397"
+  SELFDRIVE = "https://7e3be9bfcfe04c9abe58bd25fe290d1a@o1138119.ingest.sentry.io/6191481"
   # native project
-  SELFDRIVE_NATIVE = "https://3e25e235efe389b74cde72fb0e115aef@o1138119.ingest.us.sentry.io/4509950385979397"
+  SELFDRIVE_NATIVE = "https://7e3be9bfcfe04c9abe58bd25fe290d1a@o1138119.ingest.sentry.io/6191481"
 
 
 CRASHES_DIR = Paths.community_crash_root()