* Added an initial working implementation of the register readback and applied it to the LLCAN registers. Also fixed an init bug in CAN.
* Locally disable pylint import error
* Reverted change to CAN-obj->FA1R setting
* Fixed misra compliance
* Changed hash function name
* Fixed CAN filter setting
* Added voltage health test
* Converted ADC to register functions
* Converted clock to use register setters
* Added check to see if fault status is zero after running test
* Converted DAC to use register setters
* Converted fan to use register setters
* Converted gmlan bitbanging to use register setters
* Changed over interrupt driver to use register setters. Also moved some includes and definition places for critical sections
* Fixed build
* Converted LLGPIO to use register setters
* Converted pwm to use register setters
* Fixed cold boot
* Fixed health fault check in automated tests
* Added comment for the future (issue #367)
* Converted RTC driver to use register setters
* Converted SPI to use register setters
* Converted timer driver to use register setters
* Fixed register fault on white pandas and disabled showing of fault for release
* Bump version
* Remove USB 2.0 Extension from BOS descriptor.
* Declutter usb.h of unused code.
Now that I'm more confident the USB 2.0 Extensions are only required
for USB 3.0 devices, and there's less mystery around why the change
worked for us, garbage-collect the commented-out descriptor.
* Exit power saving also for CAN based ingition detection and replace interrup with simple state machine. a bit of delay it's fine
* bug fixes and also CDP set on start
* sorry misra
* move comment
* typo
* remove ignition interrupts
* Power saving state machine should be done by boardd, which also sets safety modes and usb power modes
* typo
* Added usb command for power save state setting
* Added power save enabled packet
* Added power_save_enabled to python lib too
* Added uno
* Added usb switch support
* Added PWM and IR power functions
* Implemented bootkick
* Added uno as a new hw type
* Bumped version
* Added fan control and tach readout
* WIP: RTC support
* Working RTC
* Fixed python
* Misra compliance
* Added USB control messages for fan/IR power
* Added USB commands + tests for fan & IR control. Fixed bootstub and pedal compilation
* Added IR and fan to power saving mode
* Changed defaults
* Fix safety considering uno
* passing safety now
* Minor UNO tweaks
* Fixed version
* More minor temporary tweaks
* Removed usb load switch from uno
* Added power control for shutting down the fan completely
* Disable IR LEDs by default
* Fixed linter issue
* Linter fix#2
* make ignition logic common for all cars
* ignition_can is not a safety thing. move it to can drivers
* bump version
* gm safety passive is deprecated
* move tx 1 on logic into board specific headers.
* Fixed UART overrun error
* Added stability test scripts
* Refactored UART code. ESP/GPS now uses DMA in circular mode to directly write into the ring buffer, saving a bunch of interrupts and potential race conditions.
* Changed stability test to use amount of bytes instead of amount of non-zero messages, since the ring buffer pointer is only updated on half or full DMA transfer or on line idle (e.g. no more 1 char messages from the gps)
* Increase data limit. It's too low sometimes in normal operation
* Forgot to set write pointer in ring buffer
* Increased test limit even more
* Updated cppcheck ref. New rules to be fixed
* changed 2 MACRO names that had more than 31 characters in common
* Fix newly popped 10.4: same type on arithmetic ops
* Fix 18.4: operators should not be applied to an expression
* ensure a NULL pointer isn't dereferenced
* late usb
* Added type support for black panda
* Added harness presence and orientation detection
* harness relay driving code
* Added intercept support in black panda code. Switched around can0 and can2
* Disable ADCs after orientation detection. Ignition interrupts via harness
* WIP: Hardware abstraction layer + black panda bringup
* Fixed bootstub build
* Fixed bootstub for pedal
* Fixed infinite loops
* Got CAN buses working on white again
* Fixed pedal build and black can interfaces
* Got CAN buses working on black panda
* Finished loopback test for black panda
* Erase all flash sectors on the panda. Increased binary limit. Added extra python functions.
* Fixed python
* Made new code MISRA compliant
* Cleaned up ignition. Fixed build
* Fixed health packet
* Fixed CAN mode on black bug. Changed OBD to switch on ELM mode
* Fixes from Github review
* Fixed MISRA issue for pedal
* Fixed failing gmlan tests
* ELM327 safety: allow diagnostic on all buses
* Cleaned up EON relay code
* delete only 3 sectors instead of 11 to allow a new build to be flashed. Much faster to flash
* Removed CAN only can0 output mode. Does not make sense on black panda due to reversibility issues.
* Added heartbeat logic for EON code on panda. Go to NOOUTPUT if EON does not send a heartbeat for 5 seconds.
* Remove all CAN buses live on EON startup. Shouldn't be necessary to have this separate case
* Formatting
* Added file I forgot to push
* Added heartbeat to testing code to make sure EON tests don't fail. Should probably find a better way to do this though. Heartbeat thread didn't work, concurrent USB connection issues...
* Safety: support black panda for Honda Bosch
* Disable OBD2 if setting to NOOUTPUT mode
* Run safety tests for all hw_types
* Fail test if subtest fails
* fix safety tests
* RDLR, RDHR gone from safety
* back at not failing misra safety
* fix safety tests
* did not mean this
* Use get-bytes in pedal too
* Ignore Misra 11.5 and Fix 11.8 violaitons
* Fix 11.3 violations
* Neglect Misra 11.4, fix pointer issue in bootstub and rutn on Werror for pedal builds
* Fix Misra 11.6: can't assign number to void pointer
* Fix test after changing honda_moving name
* for loop is better
* Fix bugs from fbck
