* Maybe I was asleep but somehow it worked.
* Maybe I was asleep but somehow it worked.
* 70/30 split
* 60/35 split
* 67:33 split
* use Sqrt for tiny values to increase factor. Oh, also add a test file.
* use Sqrt for tiny values to increase factor. Oh, also add a test file.
* use Sqrt for tiny values to increase factor. Oh, also add a test file.
* Raise these to restart tests
* Raise these to restart tests
* Update jerk calculation mimicking j_ego math.
* README.md
* Update timestep
* Fix test
* Readability
* Lower time
* Add higher limits for CANFD
* Send these as a floating object. update comments to add TODO msg.
* Conditional flags
* yes its a little weird but heres why:
` "aReqValue": long_state.accel_value if enabled else a_val`
its only to not have merge conflicts with syncs from this file, because if not enabled a_val is already at 0 anyways.
* Make it easier to read
* Chronological order
* Trigger rebuild
* This is an internal test on my end. Disregard, for now
* fw version for my car...
* remove fw version as that was a test
* bump submodules
* refactor that while passing internal tests
* bump safety mutation test
* all should match 50 Hz
* bump safety mutation test
* match stock behavior for accel
* do our own clipping
* apply upper/lower dynamically
* bump test
* bump test
* Higher lower limit
* move desired accel force zero in tuning controller
* bump
* bump
* abs it here
* fix logic
* make sure it resets to 0, enforced in safety
* Test a few things
* Higher jerk for VOACC
* Elantra specific
* raise `off` to stock
* bump opendbc test
* allow jerk calculations at all times
* bump
* bump
* match aReqVale
* we dont need such high accel jerk when above 20m/s. This is cruise control, not a racecar.
* 0.45 default long actuator delay
* align type hint
* add lower jerk multiplier for HYUNDAI_IONIQ
* Change min jerk
* should be float
* Change min jerk
* Change min jerk upper
* Change max jerk upper
* Change max jerk upper
* Change max jerk upper
* step + threshold + first order filter to smooth
* constants
* nah
* multiplier to 1.5
* step updates for parabolic accel/braking
* step updates for parabolic accel/braking
* even less
* test multiplier
* Merge remote-tracking branch 'sunnypilot/opendbc/master-new' into HKG-long-tune
* back to default delay for now
* update test
* update config
* update test
* update config.py
* update test
* Remove stoppingDecelRate **No need for this anymore**
* multiplier to 1.0
* Variable lower dependency
* Variable lower dependency
* Variable lower jerk minimum
* Variable lower jerk minimum
planned_accel -> desired_acel
* Revert some scaling
* .01 here
* .01 here
* try even smoother stopping
* missed a `tuning` here that instead calls itself to inf.
* what is math
* Red Diff
* Red Diff
* bring some back
* bring some back
* stronger when needed
* something simple
* simplify more
* simplify more
* dont use future
* whoops
* why
* reset
* Refactor longitudinal controller for better jerk handling
Revised `calculate_a_value` and jerk processing logic to improve acceleration and jerk handling, particularly under dynamic conditions. Adjusted test cases to cover the new logic.
* Refactor longitudinal controller for better jerk handling
Revised `calculate_a_value` and jerk processing logic to improve acceleration and jerk handling, particularly under dynamic conditions. Adjusted test cases to cover the new logic.
* Refactor longitudinal controller for better jerk handling
Revised `calculate_a_value` and jerk processing logic to improve acceleration and jerk handling, particularly under dynamic conditions. Adjusted test cases to cover the new logic.
* Adjust lower_jerk interpolation for improved accuracy
* Lowered the acceleration error threshold from -0.01 to -0.001
* Adjust jerk interpolation thresholds for Hyundai tuning.
Updated the interpolation range for smaller acceleration errors.
* Move it up
* -.03 not -.05
* radarUnavailable = higher limit patch
* Commit the real change
* Updated the interpolation values and logic for lower_jerk to refine acceleration behavior.
* Updated the interpolation values and logic for lower_jerk to refine acceleration behavior.
* Updated the interpolation values and logic for lower_jerk to refine acceleration behavior.
* Updated the interpolation values and logic for lower_jerk to refine acceleration behavior.
* THIS. THIS WILL STOP FOR LEADS
* Higher for VOACC
* Higher for VOACC
* Rename `make_jerk` to `calculate_jerk` in test cases.
* Adjust jerk tuning for Hyundai longitudinal control
Updated the interpolation table for lower jerk values to improve deceleration handling. This adjustment refines control behavior during higher deceleration requests.
* Updated the interpolation breakpoint from -0.03 to -0.025
* Adjust longitudinal control jerk tuning for smoother response
Updated interpolation values in the jerk tuning logic to improve acceleration smoothing in Hyundai longitudinal control. These changes aim to provide a more consistent and predictable driving experience, particularly during deceleration scenarios.
* Handle radar unavailability in longitudinal tuning check
* Introduce `toggleDisableMsg` to streamline determining toggle states and descriptions.
* `sunnypilot`
* `Refactor longitudinal control acceleration and jerk handling`
Removed unused `FirstOrderFilter` and simplified acceleration and jerk calculations for improved clarity and maintainability. Adjusted logic to replace redundant return statements, streamline jerk computation, and reduce unnecessary dependencies.
* `Refactor longitudinal control acceleration and jerk handling`
Removed unused `FirstOrderFilter` and simplified acceleration and jerk calculations for improved clarity and maintainability. Adjusted logic to replace redundant return statements, streamline jerk computation, and reduce unnecessary dependencies.
* Simplify test to be straight to the point.
* Adjust upper_speed_factor and integrate ramp_update logic
* Adjust upper_speed_factor and integrate ramp_update logic
* Adjust upper_speed_factor and integrate ramp_update logic
* Refine acceleration and jerk tuning logic.
* greater than 0
* bump
* bring back ramp update for jerk upper
* Update opendbc_repo
* Revert "Update opendbc_repo"
This reverts commit b790387c9080b3a553694fbae850e9aa8bb6e125.
* bump
* bump
* bump
* using count seems to work better
* Refine jerk tuning logic and expand test coverage
* bump vals
* fix logic
* Adjust jerk tuning parameters for Hyundai longitudinal control
* retry lfs check
* bump submodule
* Fix acceleration blending and enhance test coverage
* Update lower_jerk breakpoints
* bump
* Adjust lower jerk parameters and include accel_cmd condition
* Adjust vars
* "Adjust Hyundai longitudinal jerk limits and tuning logic"
* Adjust jerk limits and tuning logic for better control
* Update Hyundai longitudinal tuning and add dynamic jerk logic
Refactored longitudinal configuration to include "lookahead" parameters and revised "jerk_limits" for improved tuning flexibility. Implemented dynamic jerk adaptation logic (Gen1) for smoother braking and acceleration transitions.
* Adjust Hyundai longitudinal control parameters for tuning
* bump to original branch
* QSize Policy to stretch toggle to screen size
* bump
* completely blocked xD
* Sunnypilot -> openpilot
* Whitespace
* Clean up toggle name
* Still allow ramp while in standstill for EV
* Adjust Kia Niro EV tuning parameters for smoother control
* self.cp.flags
* bump submodule
* bump
* Remove ramp for lower desired jerk
* update README.md
* update README.md
* Adjust lookahead_jerk_lower_v values in Hyundai longitudinal config.
* update tuning
* Update tune one last time to vals from device which are much smoother.
* Accel error
* bump
* fix
* rename flag and slight cleanup
* start ui stuff
* long_state -> tuning
* Prep for clean up
* small changes
* less in main
* no longer
* format
* bump
* init panel
* expose signal for other panels to interact with
* split into its own
* unused
* move around
* actually modify CP_SP
* fix offroad transition
* rename
* back
* don't update unless we're looking at it
* move around
* use min length
* do this
* whoops
* move
* bump
* bump
* this is fine
* bump
---------
Co-authored-by: Jason Wen <haibin.wen3@gmail.com>
Co-authored-by: DevTekVE <devtekve@gmail.com>
Co-authored-by: royjr <royjr96@gmail.com>
* Refactor model and artifact structures with version compatibility filtering
- Introduced `Artifact` struct and nested it within the `Model` struct for improved clarity and organization.
- Updated enums, logic, and parsing to align with the new struct definitions.
- Implemented version compatibility filtering for model bundles using the `is_bundle_version_compatible` helper.
- Enhanced artifact download handling by adding checks for missing URIs, better error management, and improved logging.
- Adjusted model fetching to point to the latest endpoint (`v3`).
* Make linter happy
* Make linter happy
* Refactor model data parsing to improve readability.
Replaced kwargs-based data extraction with explicit parameter passing for clarity. This enhances code readability and reduces ambiguities in method calls, making the parsing logic more maintainable and straightforward.
* Refactor error handling in active model bundle retrieval.
Wrapped the logic to fetch the active model bundle in a try-except block to prevent unhandled exceptions. This ensures more robust error handling and avoids potential crashes when retrieving or processing model data.
* Refactor exception handling in get_active_model_bundle
Replace bare except with Exception to improve specificity and clarity. This ensures better debugging practices and aligns with recommended coding standards. Other minor whitespace adjustments were made for improved readability.
* Update model path to use artifact fileName property
Replaced `fileName` with `artifact.fileName` in the custom model path construction. This ensures compatibility with updated drive model structures and avoids potential file resolution issues.
* now alpha long
* fix
* rename param
* thought i did this
* debug
* debug
* more
* more
* moar
* Revert "moar"
This reverts commit e347106246583982e1be206485ad4d8eb944f817.
* Revert "more"
This reverts commit 0746e6d2e400ce1715614c62af84a9680c4d65c1.
* Revert "more"
This reverts commit 0db5a8792c01bb2d687f9152e6ba37fb76d4a453.
* Revert "debug"
This reverts commit 72f235b13727980e4331ff487998ddc7c7f7fb63.
* Revert "debug"
This reverts commit 7871b69f8c1bdffed386c2baac99542fcc50f7eb.
* Max Time Offroad
* Refactor & Fix param
* Error Handling
* rename SP variable
* Update selfdrive/ui/sunnypilot/qt/widgets/controls.h
Co-authored-by: DevTekVE <devtekve@gmail.com>
* Update selfdrive/ui/sunnypilot/qt/widgets/controls.h
Co-authored-by: DevTekVE <devtekve@gmail.com>
* Update selfdrive/ui/sunnypilot/qt/widgets/controls.h
Co-authored-by: DevTekVE <devtekve@gmail.com>
* Update selfdrive/ui/sunnypilot/qt/widgets/controls.h
Co-authored-by: DevTekVE <devtekve@gmail.com>
* Update selfdrive/ui/sunnypilot/qt/widgets/controls.cc
Co-authored-by: DevTekVE <devtekve@gmail.com>
* Update selfdrive/ui/sunnypilot/qt/offroad/settings/lateral/max_time_offroad.h
Co-authored-by: DevTekVE <devtekve@gmail.com>
* Update selfdrive/ui/sunnypilot/qt/offroad/settings/lateral/max_time_offroad.cc
Co-authored-by: DevTekVE <devtekve@gmail.com>
* UI layout changes for better alignment
selector is not big enough -> make it bigger ;)
OptionControlSP now includes a QMap argument to allow actual values to be set in param directly
* Rebase & resolve reviews
* change default to be closer to OP default
* me dumb
* MaxTimeOffroad: Add support for 30h limit and improve label formatting
* power_monitoring: Refactor MaxTimeOffroad parameter handling for clarity
* test: Add unit tests for MaxTimeOffroad parameter handling
* power_monitoring: Update MaxTimeOffroad handling to use seconds and improve shutdown logic
* power_monitoring: Improve exception handling and remove redundant shutdown check for MaxTimeOffroad
---------
Co-authored-by: DevTekVE <devtekve@gmail.com>
Co-authored-by: Jason Wen <haibin.wen3@gmail.com>
* controls
* Adjust label width dynamically based on layout type.
Updated the label's fixed width to be conditional on the layout type, improving adaptability for different inline layouts. Additionally, corrected indentation in the width calculation loop for consistency.
* Refactor OptionControlSP to improve parameter value handling and encapsulate logic in dedicated methods
* Refactor getParamValue to return an integer and ensure value is updated correctly in button click handler
* Trying to unify a bit the logic. still WIP
* Reducing a bit the change footprint
* Refactor spacing item handling to prevent duplicate insertion and improve layout management
---------
Co-authored-by: DevTekVE <devtekve@gmail.com>
* ui: update names
* Revert "ui: update names"
This reverts commit 313510c8c0f112758ca1cc3e625d47ba47989bd5.
* gone
* init
* Changed all occurrences of 'openpilot' to 'sunnypilot'
All instances of 'openpilot' in the user interface, documentation, and prompts have been updated to 'sunnypilot'. These changes include source strings, warning messages, and the prompts shown to users. The adjustment is part of the rebranding process and aims to avoid any uncertainty or confusion for users.
* vanish translations
* translations
---------
Co-authored-by: DevTekVE <devtekve@gmail.com>
infiniteCable2