openpilot v0.4.2 release

81d9871 Lexus: added first draft of RX dbc file
cb352da fix toyota steering lka message length
d294f64 fix gas pedal message length rav4h
2d035de acura rdx remove double defined message
500a734 fix acura rdx dbc, import was missing

git-subtree-dir: opendbc
git-subtree-split: 81d9871dbe00ccfc5fe4418ea3577726fffa1def

.dockerignore

@@ -1,18 +0,0 @@
-**/.git
-.DS_Store
-*.dylib
-*.DSYM
-*.d
-*.pyc
-*.pyo
-.*.swp
-.*.swo
-.*.un~
-*.tmp
-*.o
-*.o-*
-*.os
-*.os-*
-
-venv/
-.venv/

.editorconfig

@@ -1,11 +0,0 @@
-root = true
-
-[*]
-end_of_line = lf
-insert_final_newline = true
-trim_trailing_whitespace = true
-
-[*.{py,pyx,pxd}]
-charset = utf-8
-indent_style = space
-indent_size = 2

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,47 +0,0 @@
-name: Bug report
-description: For issues with running openpilot on your comma device
-labels: ["bug"]
-body:
-
-  - type: markdown
-    attributes:
-      value: >
-        Before creating a **bug report**, please check the following:
-          * If the issue likely only affects your car model or make, go back and open a **car bug report** instead.
-          * If the issue is related to the driving or driver monitoring models, you should open a [discussion](https://github.com/commaai/openpilot/discussions/categories/model-feedback) instead.
-          * Ensure you're running the latest openpilot release.
-          * Ensure you're using officially supported hardware. Issues running on PCs have a different issue template.
-          * Ensure there isn't an existing issue for your bug. If there is, leave a comment on the existing issue.
-          * Ensure you're running stock openpilot. We cannot look into bug reports from forks.
-
-        If you're unsure whether you've hit a bug, check out the #installation-help channel in the [community Discord server](https://discord.comma.ai).
-
-  - type: textarea
-    attributes:
-      label: Describe the bug
-      description: Also include a description of how to reproduce the bug
-    validations:
-      required: true
-
-  - type: input
-    id: route
-    attributes:
-      label: Provide a route where the issue occurs
-      description: Ensure the route is fully uploaded at https://useradmin.comma.ai. We cannot look into issues without routes, or at least a Dongle ID.
-      placeholder: 77611a1fac303767|2020-05-11--16-37-07
-    validations:
-      required: true
-
-  - type: input
-    id: version
-    attributes:
-      label: openpilot version
-      description: If you're not on release, provide the commit hash
-      placeholder: 0.8.10
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Additional info
-

.github/ISSUE_TEMPLATE/config.yml

@@ -1,14 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Car bug report
-    url: https://github.com/commaai/opendbc/issues/new
-    about: For issues with a particular car make or model
-  - name: Join the Discord
-    url: https://discord.comma.ai
-    about: The community Discord is for both openpilot development and experience discussion
-  - name: Report driving behavior feedback
-    url: https://discord.com/channels/469524606043160576/1254834193066623017
-    about: Feedback for the driving and driver monitoring models goes in the #driving-feedback in Discord
-  - name: Community Wiki
-    url: https://github.com/commaai/openpilot/wiki
-    about: Check out our community wiki

.github/ISSUE_TEMPLATE/enhancement.md

@@ -1,8 +0,0 @@
----
-name: Enhancement
-about: For openpilot enhancement suggestions
-title: ''
-labels: 'enhancement'
-assignees: ''
----
-

.github/ISSUE_TEMPLATE/pc_bug_report.yml

@@ -1,42 +0,0 @@
-name: PC bug report
-description: For issues with running openpilot on PC
-labels: ["PC"]
-body:
-
-  - type: markdown
-    attributes:
-      value: >
-        Before creating a **bug report**, please check the following:
-          * Ensure you're running the latest openpilot release.
-          * Ensure there isn't an existing issue for your bug. If there is, leave a comment on the existing issue.
-          * Ensure you're running stock openpilot. We cannot look into bug reports from forks.
-
-        If you're unsure whether you've hit a bug, check out the #installation-help channel in the [community Discord server](https://discord.comma.ai).
-
-  - type: textarea
-    attributes:
-      label: Describe the bug
-      description: Also include a description of how to reproduce the bug
-    validations:
-      required: true
-
-  - type: input
-    id: os-version
-    attributes:
-      label: OS Version
-      placeholder: Ubuntu 24.04
-    validations:
-      required: true
-
-  - type: input
-    id: version
-    attributes:
-      label: openpilot version or commit
-      placeholder: bd36f2ec8d3559909678eff2690c10a520938367
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: Additional info
-

.github/labeler.yaml

@@ -1,27 +0,0 @@
-CI / testing:
-  - changed-files:
-    - any-glob-to-all-files: "{.github/**,**/test_*,**/test/**,Jenkinsfile}"
-
-car:
-  - changed-files:
-    - any-glob-to-all-files: '{selfdrive/car/**,opendbc_repo}'
-
-simulation:
-  - changed-files:
-    - any-glob-to-all-files: 'tools/sim/**'
-
-ui:
-  - changed-files:
-    - any-glob-to-all-files: '{selfdrive/assets/**,selfdrive/ui/**,system/ui/**}'
-
-tools:
-  - changed-files:
-    - any-glob-to-all-files: 'tools/**'
-
-multilanguage:
-  - changed-files:
-    - any-glob-to-all-files: 'selfdrive/ui/translations/**'
-
-autonomy:
-  - changed-files:
-    - any-glob-to-all-files: "{selfdrive/modeld/models/**,selfdrive/test/process_replay/model_replay_ref_commit}"

.github/pull_request_template.md

@@ -1,68 +0,0 @@
-<!-- Please copy and paste the relevant template -->
-
-<!--- ***** Template: Fingerprint *****
-
-**Car**
-Which car (make, model, year) this fingerprint is for
-
-**Route**
-A route with the fingerprint
-
--->
-
-<!--- ***** Template: Car Bugfix *****
-
-**Description**
-
-A description of the bug and the fix. Also link the issue if it exists. 
-
-**Verification**
-
-Explain how you tested this bug fix. 
-
-**Route**
-
-Route: [a route with the bug fix]
-
-
--->
-
-<!--- ***** Template: Bugfix *****
-
-**Description**
-
-A description of the bug and the fix. Also link the issue if it exists. 
-
-**Verification**
-
-Explain how you tested this bug fix. 
-
-
--->
-
-<!--- ***** Template: Car Port *****
-
-**Checklist**
-
-- [ ] added entry to CAR in selfdrive/car/*/values.py and ran `selfdrive/car/docs.py` to generate new docs
-- [ ] test route added to [routes.py](https://github.com/commaai/openpilot/blob/master/selfdrive/car/tests/routes.py)
-- [ ] route with openpilot:
-- [ ] route with stock system:
-- [ ] car harness used (if comma doesn't sell it, put N/A):
-
-
--->
-
-<!--- ***** Template: Refactor *****
-
-**Description**
-
-A description of the refactor, including the goals it accomplishes. 
-
-**Verification**
-
-Explain how you tested the refactor for regressions. 
-
-
--->
-

.github/workflows/auto-cache/action.yaml

@@ -1,58 +0,0 @@
-name: 'automatically cache based on current runner'
-
-inputs:
-  path:
-    description: 'path to cache'
-    required: true
-  key:
-    description: 'key'
-    required: true
-  restore-keys:
-    description: 'restore-keys'
-    required: true
-  save:
-    description: 'whether to save the cache'
-    default: 'true'
-    required: false
-outputs:
-  cache-hit:
-    description: 'cache hit occurred'
-    value: ${{ (contains(runner.name, 'nsc') && steps.ns-cache.outputs.cache-hit) ||
-               (!contains(runner.name, 'nsc') && inputs.save != 'false' && steps.gha-cache.outputs.cache-hit) ||
-               (!contains(runner.name, 'nsc') && inputs.save == 'false' && steps.gha-cache-ro.outputs.cache-hit) }}
-
-runs:
-  using: "composite"
-  steps:
-    - name: setup namespace cache
-      id: ns-cache
-      if: ${{ contains(runner.name, 'nsc') }}
-      uses: namespacelabs/nscloud-cache-action@v1
-      with:
-        path: ${{ inputs.path }}
-
-    - name: setup github cache
-      id: gha-cache
-      if: ${{ !contains(runner.name, 'nsc') && inputs.save != 'false' }}
-      uses: 'actions/cache@v4'
-      with:
-        path: ${{ inputs.path }}
-        key: ${{ inputs.key }}
-        restore-keys: ${{ inputs.restore-keys }}
-
-    - name: setup github cache
-      id: gha-cache-ro
-      if: ${{ !contains(runner.name, 'nsc') && inputs.save == 'false' }}
-      uses: 'actions/cache/restore@v4'
-      with:
-        path: ${{ inputs.path }}
-        key: ${{ inputs.key }}
-        restore-keys: ${{ inputs.restore-keys }}
-
-    # make the directory manually in case we didn't get a hit, so it doesn't fail on future steps
-    - id: scons-cache-setup
-      shell: bash
-      run: |
-        mkdir -p ${{ inputs.path }}
-        sudo chmod -R 777 ${{ inputs.path }}
-        sudo chown -R $USER ${{ inputs.path }}

.github/workflows/auto_pr_review.yaml

@@ -1,52 +0,0 @@
-name: "PR review"
-on:
-  pull_request_target:
-    types: [opened, reopened, synchronize, edited]
-
-jobs:
-  labeler:
-    name: review
-    permissions:
-      contents: read
-      pull-requests: write
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: false
-
-    # Label PRs
-    - uses: actions/labeler@v5.0.0
-      with:
-        dot: true
-        configuration-path: .github/labeler.yaml
-
-    # Check PR target branch
-    - name: check branch
-      uses: Vankka/pr-target-branch-action@def32ec9d93514138d6ac0132ee62e120a72aed5
-      if: github.repository == 'commaai/openpilot'
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      with:
-        target: /^(?!master$).*/
-        exclude: /commaai:.*/
-        change-to: ${{ github.base_ref }}
-        already-exists-action: close_this
-        already-exists-comment: "Your PR should be made against the `master` branch"
-
-    # Welcome comment
-    - name: "First timers PR"
-      uses: actions/first-interaction@v1
-      if: github.event.pull_request.head.repo.full_name != 'commaai/openpilot'
-      with:
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-        pr-message: |
-            <!-- _(run_id **${{ github.run_id }}**)_ -->
-            Thanks for contributing to openpilot! In order for us to review your PR as quickly as possible, check the following:
-            * Convert your PR to a draft unless it's ready to review
-            * Read the [contributing docs](https://github.com/commaai/openpilot/blob/master/docs/CONTRIBUTING.md)
-            * Before marking as "ready for review", ensure:
-              * the goal is clearly stated in the description
-              * all the tests are passing
-              * the change is [something we merge](https://github.com/commaai/openpilot/blob/master/docs/CONTRIBUTING.md#what-gets-merged)
-              * include a route or your device' dongle ID if relevant

.github/workflows/badges.yaml

@@ -1,37 +0,0 @@
-name: badges
-on:
-  schedule:
-    - cron: '0 * * * *'
-  workflow_dispatch:
-
-env:
-  BASE_IMAGE: openpilot-base
-  DOCKER_REGISTRY: ghcr.io/commaai
-  RUN: docker run --shm-size 2G -v $PWD:/tmp/openpilot -w /tmp/openpilot -e PYTHONPATH=/tmp/openpilot -e NUM_JOBS -e JOB_ID -e GITHUB_ACTION -e GITHUB_REF -e GITHUB_HEAD_REF -e GITHUB_SHA -e GITHUB_REPOSITORY -e GITHUB_RUN_ID -v $GITHUB_WORKSPACE/.ci_cache/scons_cache:/tmp/scons_cache -v $GITHUB_WORKSPACE/.ci_cache/comma_download_cache:/tmp/comma_download_cache -v $GITHUB_WORKSPACE/.ci_cache/openpilot_cache:/tmp/openpilot_cache $DOCKER_REGISTRY/$BASE_IMAGE:latest /bin/bash -c
-
-jobs:
-  badges:
-    name: create badges
-    runs-on: ubuntu-latest
-    if: github.repository == 'commaai/openpilot'
-    permissions:
-      contents: write
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-    - uses: ./.github/workflows/setup-with-retry
-    - name: Push badges
-      run: |
-        ${{ env.RUN }} "python3 selfdrive/ui/translations/create_badges.py"
-
-        rm .gitattributes
-
-        git checkout --orphan badges
-        git rm -rf --cached .
-        git config user.email "badge-researcher@comma.ai"
-        git config user.name "Badge Researcher"
-
-        git add translation_badge.svg
-        git commit -m "Add/Update badges"
-        git push -f origin HEAD

.github/workflows/ci_weekly_report.yaml

@@ -1,101 +0,0 @@
-name: weekly CI test report
-on:
-  schedule:
-    - cron: '37 9 * * 1' # 9:37AM UTC -> 2:37AM PST every monday
-  workflow_dispatch:
-    inputs:
-      ci_runs:
-        description: 'The amount of runs to trigger in CI test report'
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-env:
-  CI_RUNS: ${{ github.event.inputs.ci_runs || '50' }}
-
-jobs:
-  setup:
-    if: github.repository == 'commaai/openpilot'
-    runs-on: ubuntu-latest
-    outputs:
-      ci_runs: ${{ steps.ci_runs_setup.outputs.matrix }}
-    steps:
-      - id: ci_runs_setup
-        name: CI_RUNS=${{ env.CI_RUNS }}
-        run: |
-          matrix=$(python3 -c "import json; print(json.dumps({ 'run_number' : list(range(${{ env.CI_RUNS }})) }))")
-          echo "matrix=$matrix" >> $GITHUB_OUTPUT
-
-  ci_matrix_run:
-    needs: [ setup ]
-    strategy:
-      fail-fast: false
-      matrix: ${{fromJSON(needs.setup.outputs.ci_runs)}}
-    uses: commaai/openpilot/.github/workflows/ci_weekly_run.yaml@master
-    with:
-      run_number: ${{ matrix.run_number }}
-
-  report:
-    needs: [ci_matrix_run]
-    runs-on: ubuntu-latest
-    if: always() && github.repository == 'commaai/openpilot'
-    steps:
-      - name: Get job results
-        uses: actions/github-script@v7
-        id: get-job-results
-        with:
-          script: |
-            const jobs = await github
-              .paginate("GET /repos/{owner}/{repo}/actions/runs/{run_id}/attempts/{attempt}/jobs", {
-                owner: "commaai",
-                repo: "${{ github.event.repository.name }}",
-                run_id: "${{ github.run_id }}",
-                attempt: "${{ github.run_attempt }}",
-              })
-            var report = {}
-            jobs.slice(1, jobs.length-1).forEach(job => {
-              if (job.conclusion === "skipped") return;
-              const jobName = job.name.split(" / ")[2];
-              const runRegex = /\((.*?)\)/;
-              const run = job.name.match(runRegex)[1];
-              report[jobName] = report[jobName] || { successes: [], failures: [], canceled: [] };
-              switch (job.conclusion) {
-                case "success":
-                  report[jobName].successes.push({ "run_number": run, "link": job.html_url}); break;
-                case "failure":
-                  report[jobName].failures.push({ "run_number": run, "link": job.html_url }); break;
-                case "canceled":
-                  report[jobName].canceled.push({ "run_number": run, "link": job.html_url }); break;
-              }
-            });
-            return JSON.stringify({"jobs": report});
-
-      - name: Add job results to summary
-        env:
-          JOB_RESULTS: ${{ fromJSON(steps.get-job-results.outputs.result) }}
-        run: |
-          cat <<EOF >> template.html
-          <table>
-            <thead>
-              <tr>
-                <th></th>
-                <th>Job</th>
-                <th>✅ Passing</th>
-                <th>❌ Failure Details</th>
-              </tr>
-            </thead>
-            <tbody>
-              {% for key in jobs.keys() %}<tr>
-                <td>{% for i in range(5) %}{% if i+1 <= (5 * jobs[key]["successes"]|length // ${{ env.CI_RUNS }}) %}🟩{% else %}🟥{% endif %}{% endfor%}</td>
-                <td>{{ key }}</td>
-                <td>{{ 100 * jobs[key]["successes"]|length // ${{ env.CI_RUNS }} }}%</td>
-                <td>{% if jobs[key]["failures"]|length > 0 %}<details>{% for failure in jobs[key]["failures"] %}<a href="{{ failure['link'] }}">Log for run #{{ failure['run_number'] }}</a><br>{% endfor %}</details>{% else %}{% endif %}</td>
-                </td>
-              </tr>{% endfor %}
-          </table>
-          EOF
-
-          pip install jinja2-cli
-          echo $JOB_RESULTS | jinja2 template.html > report.html
-          echo "# CI Test Report - ${{ env.CI_RUNS }} Runs" >> $GITHUB_STEP_SUMMARY
-          cat report.html >> $GITHUB_STEP_SUMMARY

.github/workflows/ci_weekly_run.yaml

@@ -1,17 +0,0 @@
-name: weekly CI test run
-on:
-  workflow_call:
-    inputs:
-      run_number:
-        required: true
-        type: string
-
-concurrency:
-  group: ci-run-${{ inputs.run_number }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  tests:
-    uses: commaai/openpilot/.github/workflows/tests.yaml@master
-    with:
-      run_number: ${{ inputs.run_number }}

.github/workflows/compile-openpilot/action.yaml

@@ -1,21 +0,0 @@
-name: 'compile openpilot'
-
-runs:
-  using: "composite"
-  steps:
-    - shell: bash
-      name: Build openpilot with all flags
-      run: |
-        ${{ env.RUN }} "scons -j$(nproc)"
-        ${{ env.RUN }} "release/check-dirty.sh"
-    - shell: bash
-      name: Cleanup scons cache and rebuild
-      run: |
-          ${{ env.RUN }} "rm -rf /tmp/scons_cache/* && \
-                          scons -j$(nproc) --cache-populate"
-    - name: Save scons cache
-      uses: actions/cache/save@v4
-      if: github.ref == 'refs/heads/master'
-      with:
-        path: .ci_cache/scons_cache
-        key: scons-${{ runner.arch }}-${{ env.CACHE_COMMIT_DATE }}-${{ github.sha }}

.github/workflows/compile_frogpilot.yaml

@@ -1,239 +0,0 @@
-name: Compile FrogPilot
-
-on:
-  workflow_dispatch:
-    inputs:
-      not_vetted:
-        description: "This branch is not vetted"
-        type: boolean
-        default: false
-        required: false
-      publish_custom_branch:
-        description: "Push to custom branch:"
-        type: string
-        default: ""
-        required: false
-      publish_frogpilot:
-        description: "Push to FrogPilot"
-        type: boolean
-        default: false
-        required: false
-      publish_staging:
-        description: "Push to FrogPilot-Staging"
-        type: boolean
-        default: false
-        required: false
-      publish_testing:
-        description: "Push to FrogPilot-Testing"
-        type: boolean
-        default: false
-        required: false
-      runner:
-        description: "Select runner"
-        type: choice
-        options:
-          - c3
-          - c3x
-        default: "c3"
-        required: true
-      update_translations:
-        description: "Update missing/outdated translations"
-        type: boolean
-        default: false
-        required: false
-      vet_existing_translations:
-        description: "Vet existing translations"
-        type: boolean
-        default: false
-        required: false
-
-env:
-  BASE_DIR: ${{ github.workspace }}
-  BUILD_DIR: "/data/openpilot"
-  CUSTOM_BRANCH: ${{ inputs.publish_custom_branch }}
-  GIT_EMAIL: "91348155+FrogAi@users.noreply.github.com"
-  GIT_NAME: "James"
-  OPENAI_API_KEY: ${{ secrets.OPENAI_API_KEY }}
-
-jobs:
-  get_branch:
-    runs-on: [self-hosted, "${{ inputs.runner }}"]
-    outputs:
-      branch: ${{ steps.get_branch.outputs.branch }}
-      python_version: ${{ steps.get_python_version.outputs.python_version }}
-    steps:
-      - name: Get Current Branch
-        id: get_branch
-        run: |
-          cd "$BUILD_DIR"
-          echo "branch=$(git rev-parse --abbrev-ref HEAD)" >> "$GITHUB_OUTPUT"
-
-      - name: Get Python Version
-        id: get_python_version
-        run: |
-          echo "python_version=$(tr -d '[:space:]' < "$BUILD_DIR/.python-version")" >> $GITHUB_OUTPUT
-
-  translate:
-    needs: get_branch
-    if: inputs.update_translations
-    runs-on: ubuntu-latest
-    steps:
-      - name: Configure Git Identity
-        run: |
-          git config --global user.name "$GIT_NAME"
-          git config --global user.email "$GIT_EMAIL"
-
-      - name: Checkout Required Files
-        uses: actions/checkout@v4
-        with:
-          ref: ${{ needs.get_branch.outputs.branch }}
-          sparse-checkout: |
-            frogpilot/ui/
-            selfdrive/controls/lib/alerts_offroad.json
-            selfdrive/ui/
-            selfdrive/ui/translations/
-            selfdrive/ui/translations/auto_translate.py
-            selfdrive/ui/update_translations.py
-
-      - name: Set Up Python
-        uses: actions/setup-python@v4
-        with:
-          cache: "pip"
-          python-version: ${{ needs.get_branch.outputs.python_version }}
-
-      - name: Install Dependencies
-        run: |
-          pip install requests
-          sudo apt-get update && sudo apt-get install -y --no-install-recommends qttools5-dev-tools
-
-      - name: Update Translations
-        run: |
-          python selfdrive/ui/update_translations.py --vanish
-
-      - name: Update Missing Translations
-        continue-on-error: true
-        timeout-minutes: 300
-        run: |
-          python selfdrive/ui/translations/auto_translate.py --all-files
-
-      - name: Vet Existing Translations
-        if: inputs.vet_existing_translations
-        continue-on-error: true
-        timeout-minutes: 300
-        run: |
-          python selfdrive/ui/translations/auto_translate.py --all-files --vet-translations
-
-      - name: Commit and Push Translations
-        run: |
-          if git diff --quiet selfdrive/ui/translations/*.ts; then
-            echo "No translation updates detected."
-            exit 0
-          fi
-
-          git fetch --unshallow origin "${{ needs.get_branch.outputs.branch }}"
-          git checkout "${{ needs.get_branch.outputs.branch }}"
-          git add selfdrive/ui/translations/*.ts
-          git commit --amend --no-edit
-          git push --force origin "${{ needs.get_branch.outputs.branch }}"
-
-  build_and_push:
-    needs: [get_branch, translate]
-    if: ${{ !failure() && !cancelled() && needs.get_branch.result == 'success' }}
-    runs-on: [self-hosted, "${{ inputs.runner }}"]
-    permissions:
-      contents: write
-    defaults:
-      run:
-        working-directory: ${{ env.BUILD_DIR }}
-    steps:
-      - name: Configure Git
-        run: |
-          git config http.postBuffer 104857600
-          git config user.name "$GIT_NAME"
-          git config user.email "$GIT_EMAIL"
-          git remote set-url origin "https://${{ secrets.PERSONAL_ACCESS_TOKEN }}@github.com/FrogAi/FrogPilot.git"
-
-      - name: Sync Translation Updates
-        if: inputs.update_translations
-        run: |
-          git fetch origin "${{ needs.get_branch.outputs.branch }}"
-          git reset --hard FETCH_HEAD
-
-      - name: Take Ownership of Build Directory
-        run: |
-          sudo chown -R $(whoami):$(whoami) .
-
-      - name: Clean Build Artifacts
-        run: |
-          find . -name "matlab.*.md" -delete
-
-          find . -type d \( -iname "debug" -o -iname "test" -o -iname "tests" -o -name '__pycache__' \) -exec rm -rf {} +
-
-          find . -type f \( \
-            -name '*.a' -o \
-            -name '*.o' -o \
-            -name '*.onnx' -o \
-            -name '*.os' -o \
-            -name '*.pyc' -o \
-            -name 'moc_*' \
-          \) -delete
-
-          find .github -mindepth 1 -maxdepth 1 ! -name 'workflows' -exec rm -rf {} +
-          find .github/workflows -mindepth 1 ! \( \
-            -type f \( \
-              -name 'compile_frogpilot.yaml' -o \
-              -name 'review_pull_request.yaml' -o \
-              -name 'schedule_update.yaml' -o \
-              -name 'update_pr_branch.yaml' -o \
-              -name 'update_release_branch.yaml' -o \
-              -name 'update_tinygrad.yaml' \
-            \) \
-          \) -exec rm -rf {} +
-
-          find panda/board -type f \
-            ! -name '__init__.py' \
-            ! -name 'bootstub.panda.bin' \
-            ! -name 'bootstub.panda_h7.bin' \
-            ! -name 'panda.bin.signed' \
-            ! -name 'panda_h7.bin.signed' \
-            -delete
-
-          find third_party/ -name '*Darwin*' -exec rm -rf {} +
-          find third_party/ -name '*x86*' -exec rm -rf {} +
-
-          rm -f .gitignore .gitmodules .gitattributes .lfsconfig .overlay_init
-
-          rm -rf .sconsign.dblite .vscode/ Jenkinsfile release/ scripts/ site_scons/ teleoprtc_repo/
-
-          find . -type d -empty ! -path "./.git*" -delete
-
-          touch prebuilt
-          [ "${{ inputs.not_vetted }}" = "true" ] && touch not_vetted || true
-
-      - name: Add Update Date File
-        if: inputs.publish_staging
-        continue-on-error: true
-        run: |
-          curl -fLsS https://raw.githubusercontent.com/FrogAi/FrogPilot/FrogPilot-Staging/.github/update_date -o .github/update_date || echo "No update_date found, skipping..."
-
-      - name: Commit and Push Build
-        run: |
-          git add -f .
-          git commit -m "Compile FrogPilot"
-          git push --force origin HEAD
-
-          if [ "${{ inputs.publish_frogpilot }}" = "true" ]; then
-            git push --force origin HEAD:FrogPilot
-          fi
-
-          if [ "${{ inputs.publish_staging }}" = "true" ]; then
-            git push --force origin HEAD:FrogPilot-Staging
-          fi
-
-          if [ "${{ inputs.publish_testing }}" = "true" ]; then
-            git push --force origin HEAD:FrogPilot-Testing
-          fi
-
-          if [ -n "$CUSTOM_BRANCH" ]; then
-            git push --force origin HEAD:"$CUSTOM_BRANCH"
-          fi

.github/workflows/docs.yaml

@@ -1,65 +0,0 @@
-name: docs
-
-on:
-  push:
-    branches:
-      - master
-  pull_request:
-  workflow_call:
-    inputs:
-      run_number:
-        default: '1'
-        required: true
-        type: string
-concurrency:
-  group: docs-tests-ci-run-${{ inputs.run_number }}-${{ github.event_name == 'push' && github.ref == 'refs/heads/master' && github.run_id || github.head_ref || github.ref }}-${{ github.workflow }}-${{ github.event_name }}
-  cancel-in-progress: true
-
-jobs:
-  docs:
-    name: build docs
-    runs-on: ubuntu-24.04
-    steps:
-    - uses: commaai/timeout@v1
-
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-
-    # Build
-    - name: Build docs
-      run: |
-        # TODO: can we install just the "docs" dependency group without the normal deps?
-        pip install mkdocs
-        mkdocs build
-
-    # Push to docs.comma.ai
-    - uses: actions/checkout@v4
-      if: github.ref == 'refs/heads/master' && github.repository == 'commaai/openpilot'
-      with:
-        path: openpilot-docs
-        ssh-key: ${{ secrets.OPENPILOT_DOCS_KEY }}
-        repository: commaai/openpilot-docs
-    - name: Push
-      if: github.ref == 'refs/heads/master' && github.repository == 'commaai/openpilot'
-      run: |
-        set -x
-
-        source release/identity.sh
-
-        cd openpilot-docs
-        git checkout --orphan tmp
-        git rm -rf .
-
-        # copy over docs
-        cp -r ../docs_site/ docs/
-
-        # GitHub pages config
-        touch docs/.nojekyll
-        echo -n docs.comma.ai > docs/CNAME
-
-        git add -f .
-        git commit -m "build docs"
-
-        # docs live in different repo to not bloat openpilot's full clone size
-        git push -f origin tmp:gh-pages

.github/workflows/jenkins-pr-trigger.yaml

@@ -1,59 +0,0 @@
-name: jenkins scan
-
-on:
-  issue_comment:
-    types: [created, edited]
-
-jobs:
-  # TODO: gc old branches in a separate job in this workflow
-  scan-comments:
-    runs-on: ubuntu-latest
-    if: ${{ github.event.issue.pull_request }}
-    permissions:
-      contents: write
-      issues: write
-    steps:
-    - name: Check for trigger phrase
-      id: check_comment
-      uses: actions/github-script@v7
-      with:
-        script: |
-          const triggerPhrase = "trigger-jenkins";
-          const comment = context.payload.comment.body;
-          const commenter = context.payload.comment.user.login;
-
-          const { data: permissions } = await github.rest.repos.getCollaboratorPermissionLevel({
-            owner: context.repo.owner,
-            repo: context.repo.repo,
-            username: commenter
-          });
-
-          const hasWriteAccess = permissions.permission === 'write' || permissions.permission === 'admin';
-
-          return (hasWriteAccess && comment.includes(triggerPhrase));
-        result-encoding: json
-
-    - name: Checkout repository
-      if: steps.check_comment.outputs.result == 'true'
-      uses: actions/checkout@v4
-      with:
-        ref: refs/pull/${{ github.event.issue.number }}/head
-
-    - name: Push to tmp-jenkins branch
-      if: steps.check_comment.outputs.result == 'true'
-      run: |
-        git config --global user.name "github-actions[bot]"
-        git config --global user.email "github-actions[bot]@users.noreply.github.com"
-        git checkout -b tmp-jenkins-${{ github.event.issue.number }}
-        GIT_LFS_SKIP_PUSH=1 git push -f origin tmp-jenkins-${{ github.event.issue.number }}
-
-    - name: Delete trigger comment
-      if: steps.check_comment.outputs.result == 'true' && always()
-      uses: actions/github-script@v7
-      with:
-        script: |
-          await github.rest.issues.deleteComment({
-            owner: context.repo.owner,
-            repo: context.repo.repo,
-            comment_id: context.payload.comment.id,
-          });

.github/workflows/mici_raylib_ui_preview.yaml

@@ -1,151 +0,0 @@
-name: "mici raylib ui preview"
-on:
-  push:
-    branches:
-      - master
-  pull_request_target:
-    types: [assigned, opened, synchronize, reopened, edited]
-    branches:
-      - 'master'
-    paths:
-      - 'selfdrive/assets/**'
-      - 'selfdrive/ui/**'
-      - 'system/ui/**'
-  workflow_dispatch:
-
-env:
-  UI_JOB_NAME: "Create mici raylib UI Report"
-  REPORT_NAME: ${{ github.event_name == 'push' && github.ref == 'refs/heads/master' && 'master' || github.event.number }}
-  SHA: ${{ github.event_name == 'push' && github.ref == 'refs/heads/master' && github.sha || github.event.pull_request.head.sha }}
-  BRANCH_NAME: "openpilot/pr-${{ github.event.number }}-mici-raylib-ui"
-  MASTER_BRANCH_NAME: "openpilot_master_ui_mici_raylib"
-  # All report files are pushed here
-  REPORT_FILES_BRANCH_NAME: "mici-raylib-ui-reports"
-
-jobs:
-  preview:
-    if: github.repository == 'commaai/openpilot'
-    name: preview
-    runs-on: ubuntu-latest
-    timeout-minutes: 20
-    permissions:
-      contents: read
-      pull-requests: write
-      actions: read
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: true
-
-      - name: Waiting for ui generation to end
-        uses: lewagon/wait-on-check-action@v1.3.4
-        with:
-          ref: ${{ env.SHA }}
-          check-name: ${{ env.UI_JOB_NAME }}
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          allowed-conclusions: success
-          wait-interval: 20
-
-      - name: Getting workflow run ID
-        id: get_run_id
-        run: |
-          echo "run_id=$(curl https://api.github.com/repos/${{ github.repository }}/commits/${{ env.SHA }}/check-runs | jq -r '.check_runs[] | select(.name == "${{ env.UI_JOB_NAME }}") | .html_url | capture("(?<number>[0-9]+)") | .number')" >> $GITHUB_OUTPUT
-
-      - name: Getting proposed ui  # filename: pr_ui/mici_ui_replay.mp4
-        id: download-artifact
-        uses: dawidd6/action-download-artifact@v6
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          run_id: ${{ steps.get_run_id.outputs.run_id }}
-          search_artifacts: true
-          name: mici-raylib-report-1-${{ env.REPORT_NAME }}
-          path: ${{ github.workspace }}/pr_ui
-
-      - name: Getting master ui  # filename: master_ui_raylib/mici_ui_replay.mp4
-        uses: actions/checkout@v4
-        with:
-          repository: commaai/ci-artifacts
-          ssh-key: ${{ secrets.CI_ARTIFACTS_DEPLOY_KEY }}
-          path: ${{ github.workspace }}/master_ui_raylib
-          ref: ${{ env.MASTER_BRANCH_NAME }}
-
-      - name: Saving new master ui
-        if: github.ref == 'refs/heads/master' && github.event_name == 'push'
-        working-directory: ${{ github.workspace }}/master_ui_raylib
-        run: |
-          git checkout --orphan=new_master_ui_mici_raylib
-          git rm -rf *
-          git branch -D ${{ env.MASTER_BRANCH_NAME }}
-          git branch -m ${{ env.MASTER_BRANCH_NAME }}
-          git config user.name "GitHub Actions Bot"
-          git config user.email "<>"
-          mv ${{ github.workspace }}/pr_ui/* .
-          git add .
-          git commit -m "mici raylib video for commit ${{ env.SHA }}"
-          git push origin ${{ env.MASTER_BRANCH_NAME }} --force
-
-      - name: Setup FFmpeg
-        uses: AnimMouse/setup-ffmpeg@ae28d57dabbb148eff63170b6bf7f2b60062cbae
-
-      - name: Finding diff
-        if: github.event_name == 'pull_request_target'
-        id: find_diff
-        run: |
-          # Find the video file from PR
-          pr_video="${{ github.workspace }}/pr_ui/mici_ui_replay_proposed.mp4"
-          mv "${{ github.workspace }}/pr_ui/mici_ui_replay.mp4" "$pr_video"
-
-          master_video="${{ github.workspace }}/pr_ui/mici_ui_replay_master.mp4"
-          mv "${{ github.workspace }}/master_ui_raylib/mici_ui_replay.mp4" "$master_video"
-
-          # Run report
-          export PYTHONPATH=${{ github.workspace }}
-          baseurl="https://github.com/commaai/ci-artifacts/raw/refs/heads/${{ env.BRANCH_NAME }}"
-          diff_exit_code=0
-          python3 ${{ github.workspace }}/selfdrive/ui/tests/diff/diff.py "${{ github.workspace }}/pr_ui/mici_ui_replay_master.mp4" "${{ github.workspace }}/pr_ui/mici_ui_replay_proposed.mp4" "diff.html" --basedir "$baseurl" --no-open || diff_exit_code=$?
-
-          # Copy diff report files
-          cp ${{ github.workspace }}/selfdrive/ui/tests/diff/report/diff.html ${{ github.workspace }}/pr_ui/
-          cp ${{ github.workspace }}/selfdrive/ui/tests/diff/report/diff.mp4 ${{ github.workspace }}/pr_ui/
-
-          REPORT_URL="https://commaai.github.io/ci-artifacts/diff_pr_${{ github.event.number }}.html"
-          if [ $diff_exit_code -eq 0 ]; then
-            DIFF="✅ Videos are identical! [View Diff Report]($REPORT_URL)"
-          else
-            DIFF="❌ <strong>Videos differ!</strong> [View Diff Report]($REPORT_URL)"
-          fi
-          echo "DIFF=$DIFF" >> "$GITHUB_OUTPUT"
-
-      - name: Saving proposed ui
-        if: github.event_name == 'pull_request_target'
-        working-directory: ${{ github.workspace }}/master_ui_raylib
-        run: |
-          # Overwrite PR branch w/ proposed ui, and master ui at this point in time for future reference
-          git config user.name "GitHub Actions Bot"
-          git config user.email "<>"
-          git checkout --orphan=${{ env.BRANCH_NAME }}
-          git rm -rf *
-          mv ${{ github.workspace }}/pr_ui/* .
-          git add .
-          git commit -m "mici raylib video for PR #${{ github.event.number }}"
-          git push origin ${{ env.BRANCH_NAME }} --force
-
-          # Append diff report to report files branch
-          git fetch origin ${{ env.REPORT_FILES_BRANCH_NAME }}
-          git checkout ${{ env.REPORT_FILES_BRANCH_NAME }}
-          cp ${{ github.workspace }}/selfdrive/ui/tests/diff/report/diff.html diff_pr_${{ github.event.number }}.html
-          git add diff_pr_${{ github.event.number }}.html
-          git commit -m "mici raylib ui diff report for PR #${{ github.event.number }}" || echo "No changes to commit"
-          git push origin ${{ env.REPORT_FILES_BRANCH_NAME }}
-
-      - name: Comment Video on PR
-        if: github.event_name == 'pull_request_target'
-        uses: thollander/actions-comment-pull-request@v2
-        with:
-          message: |
-            <!-- _(run_id_video_mici_raylib **${{ github.run_id }}**)_ -->
-            ## mici raylib UI Preview
-            ${{ steps.find_diff.outputs.DIFF }}
-          comment_tag: run_id_video_mici_raylib
-          pr_number: ${{ github.event.number }}
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/model_review.yaml

@@ -1,42 +0,0 @@
-name: "model review"
-
-on:
-  pull_request:
-    types: [opened, reopened, synchronize]
-    paths:
-      - 'selfdrive/modeld/models/*.onnx'
-  workflow_dispatch:
-
-jobs:
-  comment:
-    permissions:
-      contents: read
-      pull-requests: write
-    runs-on: ubuntu-latest
-    if: github.repository == 'commaai/openpilot'
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-      - name: Checkout master
-        uses: actions/checkout@v4
-        with:
-          ref: master
-          path: base
-      - run: git lfs pull
-      - run: cd base && git lfs pull
-
-      - run: pip install onnx
-
-      - name: scripts/reporter.py
-        id: report
-        run: |
-          echo "content<<EOF" >> $GITHUB_OUTPUT
-          echo "## Model Review" >> $GITHUB_OUTPUT
-          MASTER_PATH=${{ github.workspace }}/base python scripts/reporter.py >> $GITHUB_OUTPUT
-          echo "EOF" >> $GITHUB_OUTPUT
-
-      - name: Post model report comment
-        uses: marocchino/sticky-pull-request-comment@baa7203ed60924babbe5dcd0ac8eae3b66ec5e16
-        with:
-          header: model-review
-          message: ${{ steps.report.outputs.content }}

.github/workflows/prebuilt.yaml

@@ -1,39 +0,0 @@
-name: prebuilt
-on:
-  schedule:
-    - cron: '0 * * * *'
-  workflow_dispatch:
-
-env:
-  DOCKER_LOGIN: docker login ghcr.io -u ${{ github.actor }} -p ${{ secrets.GITHUB_TOKEN }}
-  BUILD: selfdrive/test/docker_build.sh prebuilt
-
-jobs:
-  build_prebuilt:
-    name: build prebuilt
-    runs-on: ubuntu-latest
-    if: github.repository == 'commaai/openpilot'
-    env:
-      PUSH_IMAGE: true
-    permissions:
-      checks: read
-      contents: read
-      packages: write
-    steps:
-    - name: Wait for green check mark
-      if: ${{ github.event_name != 'workflow_dispatch' }}
-      uses: lewagon/wait-on-check-action@ccfb013c15c8afb7bf2b7c028fb74dc5a068cccc
-      with:
-        ref: master
-        wait-interval: 30
-        running-workflow-name: 'build prebuilt'
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-        check-regexp: ^((?!.*(build master-ci).*).)*$
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-    - run: git lfs pull
-    - name: Build and Push docker image
-      run: |
-        $DOCKER_LOGIN
-        eval "$BUILD"

.github/workflows/raylib_ui_preview.yaml

@@ -1,175 +0,0 @@
-name: "raylib ui preview"
-on:
-  push:
-    branches:
-      - master
-  pull_request_target:
-    types: [assigned, opened, synchronize, reopened, edited]
-    branches:
-      - 'master'
-    paths:
-      - 'selfdrive/assets/**'
-      - 'selfdrive/ui/**'
-      - 'system/ui/**'
-  workflow_dispatch:
-
-env:
-  UI_JOB_NAME: "Create raylib UI Report"
-  REPORT_NAME: ${{ github.event_name == 'push' && github.ref == 'refs/heads/master' && 'master' || github.event.number }}
-  SHA: ${{ github.event_name == 'push' && github.ref == 'refs/heads/master' && github.sha || github.event.pull_request.head.sha }}
-  BRANCH_NAME: "openpilot/pr-${{ github.event.number }}-raylib-ui"
-
-jobs:
-  preview:
-    if: github.repository == 'commaai/openpilot'
-    name: preview
-    runs-on: ubuntu-latest
-    timeout-minutes: 20
-    permissions:
-      contents: read
-      pull-requests: write
-      actions: read
-    steps:
-      - name: Waiting for ui generation to start
-        run: sleep 30
-
-      - name: Waiting for ui generation to end
-        uses: lewagon/wait-on-check-action@v1.3.4
-        with:
-          ref: ${{ env.SHA }}
-          check-name: ${{ env.UI_JOB_NAME }}
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          allowed-conclusions: success
-          wait-interval: 20
-
-      - name: Getting workflow run ID
-        id: get_run_id
-        run: |
-          echo "run_id=$(curl https://api.github.com/repos/${{ github.repository }}/commits/${{ env.SHA }}/check-runs | jq -r '.check_runs[] | select(.name == "${{ env.UI_JOB_NAME }}") | .html_url | capture("(?<number>[0-9]+)") | .number')" >> $GITHUB_OUTPUT
-
-      - name: Getting proposed ui
-        id: download-artifact
-        uses: dawidd6/action-download-artifact@v6
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          run_id: ${{ steps.get_run_id.outputs.run_id }}
-          search_artifacts: true
-          name: raylib-report-1-${{ env.REPORT_NAME }}
-          path: ${{ github.workspace }}/pr_ui
-
-      - name: Getting master ui
-        uses: actions/checkout@v4
-        with:
-          repository: commaai/ci-artifacts
-          ssh-key: ${{ secrets.CI_ARTIFACTS_DEPLOY_KEY }}
-          path: ${{ github.workspace }}/master_ui_raylib
-          ref: openpilot_master_ui_raylib
-
-      - name: Saving new master ui
-        if: github.ref == 'refs/heads/master' && github.event_name == 'push'
-        working-directory: ${{ github.workspace }}/master_ui_raylib
-        run: |
-          git checkout --orphan=new_master_ui_raylib
-          git rm -rf *
-          git branch -D openpilot_master_ui_raylib
-          git branch -m openpilot_master_ui_raylib
-          git config user.name "GitHub Actions Bot"
-          git config user.email "<>"
-          mv ${{ github.workspace }}/pr_ui/*.png .
-          git add .
-          git commit -m "raylib screenshots for commit ${{ env.SHA }}"
-          git push origin openpilot_master_ui_raylib --force
-
-      - name: Finding diff
-        if: github.event_name == 'pull_request_target'
-        id: find_diff
-        run: >-
-          sudo apt-get update && sudo apt-get install -y imagemagick
-
-          scenes=$(find ${{ github.workspace }}/pr_ui/*.png -type f -printf "%f\n" | cut -d '.' -f 1 | grep -v 'pair_device')
-          A=($scenes)
-
-          DIFF=""
-          TABLE="<details><summary>All Screenshots</summary>"
-          TABLE="${TABLE}<table>"
-
-          for ((i=0; i<${#A[*]}; i=i+1));
-          do
-            # Check if the master file exists
-            if [ ! -f "${{ github.workspace }}/master_ui_raylib/${A[$i]}.png" ]; then
-              # This is a new file in PR UI that doesn't exist in master
-              DIFF="${DIFF}<details open>"
-              DIFF="${DIFF}<summary>${A[$i]} : \$\${\\color{cyan}\\text{NEW}}\$\$</summary>"
-              DIFF="${DIFF}<table>"
-
-              DIFF="${DIFF}<tr>"
-              DIFF="${DIFF}  <td> <img src=\"https://raw.githubusercontent.com/commaai/ci-artifacts/${{ env.BRANCH_NAME }}/${A[$i]}.png\"> </td>"
-              DIFF="${DIFF}</tr>"
-
-              DIFF="${DIFF}</table>"
-              DIFF="${DIFF}</details>"
-            elif ! compare -fuzz 2% -highlight-color DeepSkyBlue1 -lowlight-color Black -compose Src ${{ github.workspace }}/master_ui_raylib/${A[$i]}.png ${{ github.workspace }}/pr_ui/${A[$i]}.png ${{ github.workspace }}/pr_ui/${A[$i]}_diff.png; then
-              convert ${{ github.workspace }}/pr_ui/${A[$i]}_diff.png -transparent black mask.png
-              composite mask.png ${{ github.workspace }}/master_ui_raylib/${A[$i]}.png composite_diff.png
-              convert -delay 100 ${{ github.workspace }}/master_ui_raylib/${A[$i]}.png composite_diff.png -loop 0 ${{ github.workspace }}/pr_ui/${A[$i]}_diff.gif
-
-              mv ${{ github.workspace }}/master_ui_raylib/${A[$i]}.png ${{ github.workspace }}/pr_ui/${A[$i]}_master_ref.png
-
-              DIFF="${DIFF}<details open>"
-              DIFF="${DIFF}<summary>${A[$i]} : \$\${\\color{red}\\text{DIFFERENT}}\$\$</summary>"
-              DIFF="${DIFF}<table>"
-
-              DIFF="${DIFF}<tr>"
-              DIFF="${DIFF}  <td> master <img src=\"https://raw.githubusercontent.com/commaai/ci-artifacts/${{ env.BRANCH_NAME }}/${A[$i]}_master_ref.png\"> </td>"
-              DIFF="${DIFF}  <td> proposed <img src=\"https://raw.githubusercontent.com/commaai/ci-artifacts/${{ env.BRANCH_NAME }}/${A[$i]}.png\"> </td>"
-              DIFF="${DIFF}</tr>"
-
-              DIFF="${DIFF}<tr>"
-              DIFF="${DIFF}  <td> diff <img src=\"https://raw.githubusercontent.com/commaai/ci-artifacts/${{ env.BRANCH_NAME }}/${A[$i]}_diff.png\"> </td>"
-              DIFF="${DIFF}  <td> composite diff <img src=\"https://raw.githubusercontent.com/commaai/ci-artifacts/${{ env.BRANCH_NAME }}/${A[$i]}_diff.gif\"> </td>"
-              DIFF="${DIFF}</tr>"
-
-              DIFF="${DIFF}</table>"
-              DIFF="${DIFF}</details>"
-            else
-              rm -f ${{ github.workspace }}/pr_ui/${A[$i]}_diff.png
-            fi
-
-            INDEX=$(($i % 2))
-            if [[ $INDEX -eq 0 ]]; then
-              TABLE="${TABLE}<tr>"
-            fi
-            TABLE="${TABLE}  <td> <img src=\"https://raw.githubusercontent.com/commaai/ci-artifacts/${{ env.BRANCH_NAME }}/${A[$i]}.png\"> </td>"
-            if [[ $INDEX -eq 1 || $(($i + 1)) -eq ${#A[*]} ]]; then
-              TABLE="${TABLE}</tr>"
-            fi
-          done
-
-          TABLE="${TABLE}</table></details>"
-
-          echo "DIFF=$DIFF$TABLE" >> "$GITHUB_OUTPUT"
-
-      - name: Saving proposed ui
-        if: github.event_name == 'pull_request_target'
-        working-directory: ${{ github.workspace }}/master_ui_raylib
-        run: |
-          git config user.name "GitHub Actions Bot"
-          git config user.email "<>"
-          git checkout --orphan=${{ env.BRANCH_NAME }}
-          git rm -rf *
-          mv ${{ github.workspace }}/pr_ui/* .
-          git add .
-          git commit -m "raylib screenshots for PR #${{ github.event.number }}"
-          git push origin ${{ env.BRANCH_NAME }} --force
-
-      - name: Comment Screenshots on PR
-        if: github.event_name == 'pull_request_target'
-        uses: thollander/actions-comment-pull-request@v2
-        with:
-          message: |
-            <!-- _(run_id_screenshots_raylib **${{ github.run_id }}**)_ -->
-            ## raylib UI Preview
-            ${{ steps.find_diff.outputs.DIFF }}
-          comment_tag: run_id_screenshots_raylib
-          pr_number: ${{ github.event.number }}
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/release.yaml

@@ -1,42 +0,0 @@
-name: release
-on:
-  schedule:
-    - cron: '0 9 * * *'
-  workflow_dispatch:
-
-jobs:
-  build_masterci:
-    name: build master-ci
-    env:
-      ImageOS: ubuntu24
-    container:
-      image: ghcr.io/commaai/openpilot-base:latest
-    runs-on: ubuntu-latest
-    if: github.repository == 'commaai/openpilot'
-    permissions:
-      checks: read
-      contents: write
-    steps:
-    - name: Install wait-on-check-action dependencies
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y libyaml-dev
-    - name: Wait for green check mark
-      if: ${{ github.event_name == 'schedule' }}
-      uses: lewagon/wait-on-check-action@ccfb013c15c8afb7bf2b7c028fb74dc5a068cccc
-      with:
-        ref: master
-        wait-interval: 30
-        running-workflow-name: 'build master-ci'
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-        check-regexp: ^((?!.*(build prebuilt).*).)*$
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-        fetch-depth: 0
-    - name: Pull LFS
-      run: |
-        git config --global --add safe.directory '*'
-        git lfs pull
-    - name: Push master-ci
-      run: BRANCH=__nightly release/build_stripped.sh

.github/workflows/repo-maintenance.yaml

@@ -1,72 +0,0 @@
-name: repo maintenance
-
-on:
-  schedule:
-    - cron: "0 14 * * 1" # every Monday at 2am UTC (6am PST)
-  workflow_dispatch:
-
-env:
-  BASE_IMAGE: openpilot-base
-  BUILD: selfdrive/test/docker_build.sh base
-  RUN: docker run --shm-size 2G -v $PWD:/tmp/openpilot -w /tmp/openpilot -e CI=1 -e PYTHONWARNINGS=error -e FILEREADER_CACHE=1 -e PYTHONPATH=/tmp/openpilot -e NUM_JOBS -e JOB_ID -e GITHUB_ACTION -e GITHUB_REF -e GITHUB_HEAD_REF -e GITHUB_SHA -e GITHUB_REPOSITORY -e GITHUB_RUN_ID -v $GITHUB_WORKSPACE/.ci_cache/scons_cache:/tmp/scons_cache -v $GITHUB_WORKSPACE/.ci_cache/comma_download_cache:/tmp/comma_download_cache -v $GITHUB_WORKSPACE/.ci_cache/openpilot_cache:/tmp/openpilot_cache $BASE_IMAGE /bin/bash -c
-
-jobs:
-  update_translations:
-    runs-on: ubuntu-latest
-    if: github.repository == 'commaai/openpilot'
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/workflows/setup-with-retry
-      - name: Update translations
-        run: |
-          ${{ env.RUN }} "python3 selfdrive/ui/update_translations.py --vanish"
-      - name: Create Pull Request
-        uses: peter-evans/create-pull-request@9153d834b60caba6d51c9b9510b087acf9f33f83
-        with:
-          author: Vehicle Researcher <user@comma.ai>
-          commit-message: "Update translations"
-          title: "[bot] Update translations"
-          body: "Automatic PR from repo-maintenance -> update_translations"
-          branch: "update-translations"
-          base: "master"
-          delete-branch: true
-          labels: bot
-
-  package_updates:
-    name: package_updates
-    runs-on: ubuntu-latest
-    container:
-      image: ghcr.io/commaai/openpilot-base:latest
-    if: github.repository == 'commaai/openpilot'
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-    - name: uv lock
-      run: |
-        python3 -m ensurepip --upgrade
-        pip3 install uv
-        uv lock --upgrade
-    - name: bump submodules
-      run: |
-        git config --global --add safe.directory '*'
-        git submodule update --remote
-        git add .
-    - name: update car docs
-      run: |
-        export PYTHONPATH="$PWD"
-        scons -j$(nproc) --minimal opendbc_repo
-        python selfdrive/car/docs.py
-        git add docs/CARS.md
-    - name: Create Pull Request
-      uses: peter-evans/create-pull-request@9153d834b60caba6d51c9b9510b087acf9f33f83
-      with:
-        author: Vehicle Researcher <user@comma.ai>
-        token: ${{ secrets.ACTIONS_CREATE_PR_PAT }}
-        commit-message: Update Python packages
-        title: '[bot] Update Python packages'
-        branch: auto-package-updates
-        base: master
-        delete-branch: true
-        body: 'Automatic PR from repo-maintenance -> package_updates'
-        labels: bot

.github/workflows/review_pull_request.yaml

@@ -1,38 +0,0 @@
-name: Review Pull Request
-
-on:
-  pull_request_target:
-    types: [opened, reopened]
-
-env:
-  EXPECTED_BRANCH: "MAKE-PRS-HERE"
-  GIT_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-permissions:
-  pull-requests: write
-
-jobs:
-  pr_check:
-    runs-on: ubuntu-latest
-    if: ${{ github.actor != 'FrogAi' }}
-    steps:
-      - name: Validate Target Branch
-        env:
-          GH_TOKEN: ${{ env.GIT_TOKEN }}
-          PR_NUMBER: ${{ github.event.pull_request.number }}
-          REPO: ${{ github.repository }}
-          TARGET_BRANCH: ${{ github.base_ref }}
-        run: |
-          if [ "$TARGET_BRANCH" != "$EXPECTED_BRANCH" ]; then
-            echo "Invalid target branch: $TARGET_BRANCH"
-
-            gh pr comment "$PR_NUMBER" --repo "$REPO" \
-              --body "Please submit your pull request to the \"$EXPECTED_BRANCH\" branch."
-
-            gh pr close "$PR_NUMBER" --repo "$REPO"
-          else
-            echo "Valid target branch."
-
-            gh pr comment "$PR_NUMBER" --repo "$REPO" \
-              --body "Thank you for your PR! If you're not already in the FrogPilot Discord, [feel free to join](https://discord.FrogPilot.com) and let me know you've opened a PR!"
-          fi

.github/workflows/schedule_update.yaml

@@ -1,71 +0,0 @@
-name: Schedule FrogPilot Update
-
-on:
-  workflow_dispatch:
-    inputs:
-      scheduled_date:
-        description: "Enter the date to update the \"FrogPilot\" branch (YYYY-MM-DD)"
-        required: true
-
-env:
-  GIT_EMAIL: "91348155+FrogAi@users.noreply.github.com"
-  GIT_NAME: "James"
-  TARGET_BRANCH: "FrogPilot-Staging"
-  UPDATE_FILE_PATH: ".github/update_date"
-
-jobs:
-  schedule_update:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout Target Branch
-        uses: actions/checkout@v4
-        with:
-          ref: ${{ env.TARGET_BRANCH }}
-          token: ${{ secrets.PERSONAL_ACCESS_TOKEN }}
-          fetch-depth: 3
-
-      - name: Configure Git Identity
-        run: |
-          git config --global user.name "$GIT_NAME"
-          git config --global user.email "$GIT_EMAIL"
-
-      - name: Write Schedule Date
-        env:
-          SCHEDULED_DATE: ${{ github.event.inputs.scheduled_date }}
-        run: |
-          echo "$SCHEDULED_DATE" > "$UPDATE_FILE_PATH"
-          git add "$UPDATE_FILE_PATH"
-
-      - name: Get Target Commit Data
-        id: get_target
-        run: |
-          TARGET_COMMIT=$(git rev-parse HEAD~1)
-          AUTHOR_DATE=$(git show -s --format=%aD "$TARGET_COMMIT")
-          COMMITTER_DATE=$(git show -s --format=%cD "$TARGET_COMMIT")
-
-          echo "AUTHOR_DATE=$AUTHOR_DATE" >> "$GITHUB_ENV"
-          echo "COMMITTER_DATE=$COMMITTER_DATE" >> "$GITHUB_ENV"
-          echo "TARGET_COMMIT=$TARGET_COMMIT" >> "$GITHUB_ENV"
-
-      - name: Create Fixup Commit
-        id: fixup_commit
-        run: |
-          if git diff --cached --quiet; then
-            echo "No changes detected."
-            echo "has_changes=false" >> "$GITHUB_OUTPUT"
-          else
-            echo "Changes detected. Creating fixup commit."
-            git commit --fixup="$TARGET_COMMIT"
-            echo "has_changes=true" >> "$GITHUB_OUTPUT"
-          fi
-
-      - name: Autosquash and Restore Timestamps
-        if: steps.fixup_commit.outputs.has_changes == 'true'
-        run: |
-          GIT_SEQUENCE_EDITOR=: git rebase --autosquash -i HEAD~3
-          git rebase --exec "GIT_COMMITTER_DATE='$COMMITTER_DATE' git commit --amend --no-edit --date='$AUTHOR_DATE'" HEAD~2
-
-      - name: Push Changes
-        if: steps.fixup_commit.outputs.has_changes == 'true'
-        run: |
-          git push origin "$TARGET_BRANCH" --force-with-lease

.github/workflows/setup-with-retry/action.yaml

@@ -1,52 +0,0 @@
-name: 'openpilot env setup, with retry on failure'
-
-inputs:
-  docker_hub_pat:
-    description: 'Auth token for Docker Hub, required for BuildJet jobs'
-    required: false
-    default: ''
-  sleep_time:
-    description: 'Time to sleep between retries'
-    required: false
-    default: 30
-
-outputs:
-  duration:
-    description: 'Duration of the setup process in seconds'
-    value: ${{ steps.get_duration.outputs.duration }}
-
-runs:
-  using: "composite"
-  steps:
-    - id: start_time
-      shell: bash
-      run: echo "START_TIME=$(date +%s)" >> $GITHUB_ENV
-    - id: setup1
-      uses: ./.github/workflows/setup
-      continue-on-error: true
-      with:
-        is_retried: true
-    - if: steps.setup1.outcome == 'failure'
-      shell: bash
-      run: sleep ${{ inputs.sleep_time }}
-    - id: setup2
-      if: steps.setup1.outcome == 'failure'
-      uses: ./.github/workflows/setup
-      continue-on-error: true
-      with:
-        is_retried: true
-    - if: steps.setup2.outcome == 'failure'
-      shell: bash
-      run: sleep ${{ inputs.sleep_time }}
-    - id: setup3
-      if: steps.setup2.outcome == 'failure'
-      uses: ./.github/workflows/setup
-      with:
-        is_retried: true
-    - id: get_duration
-      shell: bash
-      run: |
-        END_TIME=$(date +%s)
-        DURATION=$((END_TIME - START_TIME))
-        echo "Total duration: $DURATION seconds"
-        echo "duration=$DURATION" >> $GITHUB_OUTPUT

.github/workflows/setup/action.yaml

@@ -1,56 +0,0 @@
-name: 'openpilot env setup'
-
-inputs:
-  is_retried:
-    description: 'A mock param that asserts that we use the setup-with-retry instead of this action directly'
-    required: false
-    default: 'false'
-
-runs:
-  using: "composite"
-  steps:
-    # assert that this action is retried using the setup-with-retry
-    - shell: bash
-      if: ${{ inputs.is_retried == 'false' }}
-      run: |
-        echo "You should not run this action directly. Use setup-with-retry instead"
-        exit 1
-
-    - shell: bash
-      name: No retries!
-      run: |
-        if [ "${{ github.run_attempt }}" -gt 1 ]; then
-          echo -e "\033[0;31m##################################################"
-          echo -e "\033[0;31m    Retries not allowed! Fix the flaky test!      "
-          echo -e "\033[0;31m##################################################\033[0m"
-          exit 1
-        fi
-
-    # do this after checkout to ensure our custom LFS config is used to pull from GitLab
-    - shell: bash
-      run: git lfs pull
-
-    # build cache
-    - id: date
-      shell: bash
-      run: echo "CACHE_COMMIT_DATE=$(git log -1 --pretty='format:%cd' --date=format:'%Y-%m-%d-%H:%M')" >> $GITHUB_ENV
-    - shell: bash
-      run: echo "$CACHE_COMMIT_DATE"
-    - id: scons-cache
-      uses: ./.github/workflows/auto-cache
-      with:
-        path: .ci_cache/scons_cache
-        key: scons-${{ runner.arch }}-${{ env.CACHE_COMMIT_DATE }}-${{ github.sha }}
-        restore-keys: |
-          scons-${{ runner.arch }}-${{ env.CACHE_COMMIT_DATE }}
-          scons-${{ runner.arch }}
-    # as suggested here: https://github.com/moby/moby/issues/32816#issuecomment-910030001
-    - id: normalize-file-permissions
-      shell: bash
-      name: Normalize file permissions to ensure a consistent docker build cache
-      run: |
-        find . -type f -executable -not -perm 755 -exec chmod 755 {} \;
-        find . -type f -not -executable -not -perm 644 -exec chmod 644 {} \;
-    # build our docker image
-    - shell: bash
-      run: eval ${{ env.BUILD }}

.github/workflows/stale.yaml

@@ -1,52 +0,0 @@
-name: stale
-on:
-  schedule:
-    - cron: '30 1 * * *'
-  workflow_dispatch:
-
-env:
-  DAYS_BEFORE_PR_CLOSE: 7
-  DAYS_BEFORE_PR_STALE: 24
-  DAYS_BEFORE_PR_STALE_DRAFT: 30
-
-jobs:
-  stale:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/stale@v9
-        with:
-          exempt-all-milestones: true
-
-          # pull request config
-          stale-pr-message: 'This PR has had no activity for ${{ env.DAYS_BEFORE_PR_STALE }} days. It will be automatically closed in ${{ env.DAYS_BEFORE_PR_CLOSE }} days if there is no activity.'
-          close-pr-message: 'This PR has been automatically closed due to inactivity. Feel free to re-open once activity resumes.'
-          stale-pr-label: stale
-          delete-branch: ${{ github.event.pull_request.head.repo.full_name == 'commaai/openpilot' }} # only delete branches on the main repo
-          exempt-pr-labels: "ignore stale,needs testing" # if wip or it needs testing from the community, don't mark as stale
-          days-before-pr-stale: ${{ env.DAYS_BEFORE_PR_STALE }}
-          days-before-pr-close: ${{ env.DAYS_BEFORE_PR_CLOSE }}
-          exempt-draft-pr: false
-
-          # issue config
-          days-before-issue-stale: -1 # ignore issues for now
-
-  # same as above, but give draft PRs more time
-  stale_drafts:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/stale@v9
-        with:
-          exempt-all-milestones: true
-
-          # pull request config
-          stale-pr-message: 'This PR has had no activity for ${{ env.DAYS_BEFORE_PR_STALE_DRAFT }} days. It will be automatically closed in ${{ env.DAYS_BEFORE_PR_CLOSE }} days if there is no activity.'
-          close-pr-message: 'This PR has been automatically closed due to inactivity. Feel free to re-open once activity resumes.'
-          stale-pr-label: stale
-          delete-branch: ${{ github.event.pull_request.head.repo.full_name == 'commaai/openpilot' }} # only delete branches on the main repo
-          exempt-pr-labels: "ignore stale,needs testing" # if wip or it needs testing from the community, don't mark as stale
-          days-before-pr-stale: ${{ env.DAYS_BEFORE_PR_STALE_DRAFT }}
-          days-before-pr-close: ${{ env.DAYS_BEFORE_PR_CLOSE }}
-          exempt-draft-pr: true
-
-          # issue config
-          days-before-issue-stale: -1 # ignore issues for now

.github/workflows/tests.yaml

@@ -1,294 +0,0 @@
-name: tests
-
-on:
-  push:
-    branches:
-      - master
-  pull_request:
-  workflow_dispatch:
-  workflow_call:
-    inputs:
-      run_number:
-        default: '1'
-        required: true
-        type: string
-
-concurrency:
-  group: tests-ci-run-${{ inputs.run_number }}-${{ github.event_name == 'push' && github.ref == 'refs/heads/master' && github.run_id || github.head_ref || github.ref }}-${{ github.workflow }}-${{ github.event_name }}
-  cancel-in-progress: true
-
-env:
-  PYTHONWARNINGS: error
-  BASE_IMAGE: openpilot-base
-  AZURE_TOKEN: ${{ secrets.AZURE_COMMADATACI_OPENPILOTCI_TOKEN }}
-
-  DOCKER_LOGIN: docker login ghcr.io -u ${{ github.actor }} -p ${{ secrets.GITHUB_TOKEN }}
-  BUILD: selfdrive/test/docker_build.sh base
-
-  RUN: docker run --shm-size 2G -v $PWD:/tmp/openpilot -w /tmp/openpilot -e CI=1 -e PYTHONWARNINGS=error -e FILEREADER_CACHE=1 -e PYTHONPATH=/tmp/openpilot -e NUM_JOBS -e JOB_ID -e GITHUB_ACTION -e GITHUB_REF -e GITHUB_HEAD_REF -e GITHUB_SHA -e GITHUB_REPOSITORY -e GITHUB_RUN_ID -v $GITHUB_WORKSPACE/.ci_cache/scons_cache:/tmp/scons_cache -v $GITHUB_WORKSPACE/.ci_cache/comma_download_cache:/tmp/comma_download_cache -v $GITHUB_WORKSPACE/.ci_cache/openpilot_cache:/tmp/openpilot_cache $BASE_IMAGE /bin/bash -c
-
-  PYTEST: pytest --continue-on-collection-errors --durations=0 -n logical
-
-jobs:
-  build_release:
-    name: build release
-    runs-on: ${{
-      (github.repository == 'commaai/openpilot') &&
-      ((github.event_name != 'pull_request') ||
-      (github.event.pull_request.head.repo.full_name == 'commaai/openpilot'))
-      && fromJSON('["namespace-profile-amd64-8x16", "namespace-experiments:docker.builds.local-cache=separate"]')
-      || fromJSON('["ubuntu-24.04"]') }}
-    env:
-      STRIPPED_DIR: /tmp/releasepilot
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-    - name: Getting LFS files
-      uses: nick-fields/retry@7152eba30c6575329ac0576536151aca5a72780e
-      with:
-        timeout_minutes: 2
-        max_attempts: 3
-        command: git lfs pull
-    - name: Build devel
-      timeout-minutes: 1
-      run: TARGET_DIR=$STRIPPED_DIR release/build_stripped.sh
-    - uses: ./.github/workflows/setup-with-retry
-    - name: Build openpilot and run checks
-      timeout-minutes: ${{ ((steps.restore-scons-cache.outputs.cache-hit == 'true') && 10 || 30) }} # allow more time when we missed the scons cache
-      run: |
-        cd $STRIPPED_DIR
-        ${{ env.RUN }} "python3 system/manager/build.py"
-    - name: Run tests
-      timeout-minutes: 1
-      run: |
-        cd $STRIPPED_DIR
-        ${{ env.RUN }} "release/check-dirty.sh"
-    - name: Check submodules
-      if: github.repository == 'commaai/openpilot'
-      timeout-minutes: 3
-      run: release/check-submodules.sh
-
-  build:
-    runs-on: ${{
-      (github.repository == 'commaai/openpilot') &&
-      ((github.event_name != 'pull_request') ||
-      (github.event.pull_request.head.repo.full_name == 'commaai/openpilot'))
-      && fromJSON('["namespace-profile-amd64-8x16", "namespace-experiments:docker.builds.local-cache=separate"]')
-      || fromJSON('["ubuntu-24.04"]') }}
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-    - name: Setup docker push
-      if: github.ref == 'refs/heads/master' && github.event_name != 'pull_request' && github.repository == 'commaai/openpilot'
-      run: |
-        echo "PUSH_IMAGE=true" >> "$GITHUB_ENV"
-        $DOCKER_LOGIN
-    - uses: ./.github/workflows/setup-with-retry
-    - uses: ./.github/workflows/compile-openpilot
-      timeout-minutes: 30
-
-  build_mac:
-    name: build macOS
-    if: false # tmp disable due to brew install not working
-    runs-on: ${{ ((github.repository == 'commaai/openpilot') && ((github.event_name != 'pull_request') || (github.event.pull_request.head.repo.full_name == 'commaai/openpilot'))) && 'namespace-profile-macos-8x14' || 'macos-latest' }}
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-    - run: echo "CACHE_COMMIT_DATE=$(git log -1 --pretty='format:%cd' --date=format:'%Y-%m-%d-%H:%M')" >> $GITHUB_ENV
-    - name: Homebrew cache
-      uses: ./.github/workflows/auto-cache
-      with:
-        path: ~/Library/Caches/Homebrew
-        key: brew-macos-${{ env.CACHE_COMMIT_DATE }}-${{ github.sha }}
-        restore-keys: |
-          brew-macos-${{ env.CACHE_COMMIT_DATE }}
-          brew-macos
-    - name: Install dependencies
-      run: ./tools/mac_setup.sh
-      env:
-        PYTHONWARNINGS: default  # package install has DeprecationWarnings
-        HOMEBREW_DISPLAY_INSTALL_TIMES: 1
-    - run: git lfs pull
-    - name: Getting scons cache
-      uses: ./.github/workflows/auto-cache
-      with:
-        path: /tmp/scons_cache
-        key: scons-${{ runner.arch }}-macos-${{ env.CACHE_COMMIT_DATE }}-${{ github.sha }}
-        restore-keys: |
-          scons-${{ runner.arch }}-macos-${{ env.CACHE_COMMIT_DATE }}
-          scons-${{ runner.arch }}-macos
-    - name: Building openpilot
-      run: . .venv/bin/activate && scons -j$(nproc)
-
-  static_analysis:
-    name: static analysis
-    runs-on: ${{
-      (github.repository == 'commaai/openpilot') &&
-      ((github.event_name != 'pull_request') ||
-      (github.event.pull_request.head.repo.full_name == 'commaai/openpilot'))
-      && fromJSON('["namespace-profile-amd64-8x16", "namespace-experiments:docker.builds.local-cache=separate"]')
-      || fromJSON('["ubuntu-24.04"]') }}
-    env:
-      PYTHONWARNINGS: default
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-    - uses: ./.github/workflows/setup-with-retry
-    - name: Static analysis
-      timeout-minutes: 1
-      run: ${{ env.RUN }} "scripts/lint/lint.sh"
-
-  unit_tests:
-    name: unit tests
-    runs-on: ${{
-      (github.repository == 'commaai/openpilot') &&
-      ((github.event_name != 'pull_request') ||
-      (github.event.pull_request.head.repo.full_name == 'commaai/openpilot'))
-      && fromJSON('["namespace-profile-amd64-8x16", "namespace-experiments:docker.builds.local-cache=separate"]')
-      || fromJSON('["ubuntu-24.04"]') }}
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-    - uses: ./.github/workflows/setup-with-retry
-      id: setup-step
-    - name: Build openpilot
-      run: ${{ env.RUN }} "scons -j$(nproc)"
-    - name: Run unit tests
-      timeout-minutes: ${{ contains(runner.name, 'nsc') && ((steps.setup-step.outputs.duration < 18) && 1 || 2) || 20 }}
-      run: |
-        ${{ env.RUN }} "source selfdrive/test/setup_xvfb.sh && \
-                        # Pre-compile Python bytecode so each pytest worker doesn't need to
-                        $PYTEST --collect-only -m 'not slow' -qq && \
-                        MAX_EXAMPLES=1 $PYTEST -m 'not slow' && \
-                        chmod -R 777 /tmp/comma_download_cache"
-
-  process_replay:
-    name: process replay
-    runs-on: ${{
-      (github.repository == 'commaai/openpilot') &&
-      ((github.event_name != 'pull_request') ||
-      (github.event.pull_request.head.repo.full_name == 'commaai/openpilot'))
-      && fromJSON('["namespace-profile-amd64-8x16", "namespace-experiments:docker.builds.local-cache=separate"]')
-      || fromJSON('["ubuntu-24.04"]') }}
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-    - uses: ./.github/workflows/setup-with-retry
-      id: setup-step
-    - name: Cache test routes
-      id: dependency-cache
-      uses: actions/cache@v4
-      with:
-        path: .ci_cache/comma_download_cache
-        key: proc-replay-${{ hashFiles('selfdrive/test/process_replay/ref_commit', 'selfdrive/test/process_replay/test_processes.py') }}
-    - name: Build openpilot
-      run: |
-        ${{ env.RUN }} "scons -j$(nproc)"
-    - name: Run replay
-      timeout-minutes: ${{ contains(runner.name, 'nsc') && (steps.dependency-cache.outputs.cache-hit == 'true') && ((steps.setup-step.outputs.duration < 18) && 1 || 2) || 20 }}
-      run: |
-        ${{ env.RUN }} "selfdrive/test/process_replay/test_processes.py -j$(nproc) && \
-                        chmod -R 777 /tmp/comma_download_cache"
-    - name: Print diff
-      id: print-diff
-      if: always()
-      run: cat selfdrive/test/process_replay/diff.txt
-    - uses: actions/upload-artifact@v4
-      if: always()
-      continue-on-error: true
-      with:
-        name: process_replay_diff.txt
-        path: selfdrive/test/process_replay/diff.txt
-    - name: Upload reference logs
-      if: false # TODO: move this to github instead of azure
-      run: |
-        ${{ env.RUN }} "unset PYTHONWARNINGS && AZURE_TOKEN='$AZURE_TOKEN' python3 selfdrive/test/process_replay/test_processes.py -j$(nproc) --upload-only"
-    - name: Run regen
-      if: false
-      timeout-minutes: 4
-      run: |
-        ${{ env.RUN }} "ONNXCPU=1 $PYTEST selfdrive/test/process_replay/test_regen.py && \
-                        chmod -R 777 /tmp/comma_download_cache"
-
-  simulator_driving:
-    name: simulator driving
-    runs-on: ${{
-      (github.repository == 'commaai/openpilot') &&
-      ((github.event_name != 'pull_request') ||
-      (github.event.pull_request.head.repo.full_name == 'commaai/openpilot'))
-      && fromJSON('["namespace-profile-amd64-8x16", "namespace-experiments:docker.builds.local-cache=separate"]')
-      || fromJSON('["ubuntu-24.04"]') }}
-    if: false  # FIXME: Started to timeout recently
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: true
-    - uses: ./.github/workflows/setup-with-retry
-      id: setup-step
-    - name: Build openpilot
-      run: |
-        ${{ env.RUN }} "scons -j$(nproc)"
-    - name: Driving test
-      timeout-minutes: ${{ (steps.setup-step.outputs.duration < 18) && 1 || 2 }}
-      run: |
-        ${{ env.RUN }} "source selfdrive/test/setup_xvfb.sh && \
-                        source selfdrive/test/setup_vsound.sh && \
-                        CI=1 pytest -s tools/sim/tests/test_metadrive_bridge.py"
-
-  create_raylib_ui_report:
-    name: Create raylib UI Report
-    runs-on: ${{
-      (github.repository == 'commaai/openpilot') &&
-      ((github.event_name != 'pull_request') ||
-      (github.event.pull_request.head.repo.full_name == 'commaai/openpilot'))
-      && fromJSON('["namespace-profile-amd64-8x16", "namespace-experiments:docker.builds.local-cache=separate"]')
-      || fromJSON('["ubuntu-24.04"]') }}
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: true
-      - uses: ./.github/workflows/setup-with-retry
-      - name: Build openpilot
-        run: ${{ env.RUN }} "scons -j$(nproc)"
-      - name: Create raylib UI Report
-        run: >
-          ${{ env.RUN }} "PYTHONWARNINGS=ignore &&
-                          source selfdrive/test/setup_xvfb.sh &&
-                          python3 selfdrive/ui/tests/test_ui/raylib_screenshots.py"
-      - name: Upload Raylib UI Report
-        uses: actions/upload-artifact@v4
-        with:
-          name: raylib-report-${{ inputs.run_number || '1' }}-${{ github.event_name == 'push' && github.ref == 'refs/heads/master' && 'master' || github.event.number }}
-          path: selfdrive/ui/tests/test_ui/raylib_report/screenshots
-
-  create_mici_raylib_ui_report:
-    name: Create mici raylib UI Report
-    runs-on: ${{
-      (github.repository == 'commaai/openpilot') &&
-      ((github.event_name != 'pull_request') ||
-      (github.event.pull_request.head.repo.full_name == 'commaai/openpilot'))
-      && fromJSON('["namespace-profile-amd64-8x16", "namespace-experiments:docker.builds.local-cache=separate"]')
-      || fromJSON('["ubuntu-24.04"]') }}
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: true
-      - uses: ./.github/workflows/setup-with-retry
-      - name: Build openpilot
-        run: ${{ env.RUN }} "scons -j$(nproc)"
-      - name: Create mici raylib UI Report
-        run: >
-          ${{ env.RUN }} "PYTHONWARNINGS=ignore &&
-                          source selfdrive/test/setup_xvfb.sh &&
-                          WINDOWED=1 python3 selfdrive/ui/tests/diff/replay.py"
-      - name: Upload Raylib UI Report
-        uses: actions/upload-artifact@v4
-        with:
-          name: mici-raylib-report-${{ inputs.run_number || '1' }}-${{ github.event_name == 'push' && github.ref == 'refs/heads/master' && 'master' || github.event.number }}
-          path: selfdrive/ui/tests/diff/report

.github/workflows/update_pr_branch.yaml

@@ -1,97 +0,0 @@
-name: Update MAKE-PRS-HERE
-run-name: Update MAKE-PRS-HERE
-
-on:
-  push:
-    branches:
-      - FrogPilot-Testing
-
-env:
-  GIT_EMAIL: "91348155+FrogAi@users.noreply.github.com"
-  GIT_NAME: "James"
-  GITHUB_TOKEN: ${{ secrets.PERSONAL_ACCESS_TOKEN }}
-  SOURCE_BRANCH: FrogPilot-Testing
-  TARGET_BRANCH: MAKE-PRS-HERE
-  TZ: America/Phoenix
-
-permissions:
-  contents: write
-
-jobs:
-  update_branch:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout Source
-        uses: actions/checkout@v4
-        with:
-          ref: ${{ env.SOURCE_BRANCH }}
-          fetch-depth: 5
-          token: ${{ env.GITHUB_TOKEN }}
-
-      - name: Configure Git Identity
-        run: |
-          git config --global user.name "$GIT_NAME"
-          git config --global user.email "$GIT_EMAIL"
-
-      - name: Revert "Compile FrogPilot"
-        id: prepare_source
-        run: |
-          COMPILE_COMMIT=$(git rev-list HEAD -n 1 --grep="Compile FrogPilot" || true)
-
-          if [ -n "$COMPILE_COMMIT" ]; then
-            echo "Found 'Compile FrogPilot' at $COMPILE_COMMIT. Reverting..."
-            git revert --no-edit "$COMPILE_COMMIT"
-          else
-            echo "Compile commit not found. Proceeding with current source state."
-          fi
-
-          echo "source_state=$(git rev-parse HEAD)" >> "$GITHUB_OUTPUT"
-
-      - name: Checkout Target
-        run: |
-          git fetch origin "$TARGET_BRANCH" --depth=2
-          git checkout "$TARGET_BRANCH"
-
-      - name: Sync Files from Source to Target
-        env:
-          SOURCE_STATE: ${{ steps.prepare_source.outputs.source_state }}
-        run: |
-          git rm -r --ignore-unmatch .
-          git clean -fdx
-
-          git checkout "$SOURCE_STATE" -- .
-
-          rm -f .github/update_date
-          git add --all
-
-      - name: Commit and Push
-        env:
-          REPO_NAME: ${{ github.repository }}
-        run: |
-          if git diff --staged --quiet; then
-            echo "Working tree is clean. No changes to commit."
-            exit 0
-          fi
-
-          DAY=$(TZ="$TZ" date +'%d' | sed 's/^0//')
-          case "$DAY" in
-            1|21|31) SUFFIX="st" ;;
-            2|22)    SUFFIX="nd" ;;
-            3|23)    SUFFIX="rd" ;;
-            *)       SUFFIX="th" ;;
-          esac
-
-          MONTH=$(TZ="$TZ" date +'%B')
-          YEAR=$(TZ="$TZ" date +'%Y')
-          COMMIT_MSG="${MONTH} ${DAY}${SUFFIX}, ${YEAR} Update"
-
-          if git log -1 --pretty=%s | grep -q "$COMMIT_MSG"; then
-            echo "Amending previous commit: $COMMIT_MSG"
-            git commit --amend --no-edit
-          else
-            echo "Creating new commit: $COMMIT_MSG"
-            git commit -m "$COMMIT_MSG"
-          fi
-
-          git remote set-url origin "https://${GITHUB_TOKEN}@github.com/${REPO_NAME}"
-          git push origin "$TARGET_BRANCH" --force

.github/workflows/update_release_branch.yaml

@@ -1,107 +0,0 @@
-name: Update FrogPilot Branch
-
-on:
-  schedule:
-    - cron: "0 18 * * 6"
-
-env:
-  BRANCH_FROGPILOT: FrogPilot
-  BRANCH_PREVIOUS: FrogPilot-Previous
-  BRANCH_STAGING: FrogPilot-Staging
-  GIT_EMAIL: "91348155+FrogAi@users.noreply.github.com"
-  GIT_NAME: "James"
-  GITHUB_TOKEN: ${{ secrets.PERSONAL_ACCESS_TOKEN }}
-  TZ: America/Phoenix
-  UPDATE_FILE: .github/update_date
-
-jobs:
-  check_update:
-    runs-on: ubuntu-latest
-    outputs:
-      update_due: ${{ steps.check_update.outputs.update_due }}
-      scheduled_date: ${{ steps.check_update.outputs.scheduled_date }}
-    steps:
-      - name: Check Update Status
-        id: check_update
-        env:
-          REPO_NAME: ${{ github.repository }}
-        run: |
-          URL="https://raw.githubusercontent.com/$REPO_NAME/$BRANCH_STAGING/$UPDATE_FILE"
-          STATUS=$(curl -o /dev/null -s -w "%{http_code}\n" "$URL")
-
-          if [ "$STATUS" != "200" ]; then
-            echo "update_due=false" >> "$GITHUB_OUTPUT"
-            exit 0
-          fi
-
-          SCHEDULED_DATE=$(curl -s "$URL")
-          CURRENT_DATE=$(TZ="$TZ" date +%F)
-
-          if [ "$SCHEDULED_DATE" == "$CURRENT_DATE" ]; then
-            echo "update_due=true" >> "$GITHUB_OUTPUT"
-            echo "scheduled_date=$SCHEDULED_DATE" >> "$GITHUB_OUTPUT"
-          else
-            echo "update_due=false" >> "$GITHUB_OUTPUT"
-          fi
-
-  update_branch:
-    needs: check_update
-    if: ${{ needs.check_update.outputs.update_due == 'true' }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout Staging
-        uses: actions/checkout@v4
-        with:
-          ref: ${{ env.BRANCH_STAGING }}
-          fetch-depth: 0
-          token: ${{ secrets.PERSONAL_ACCESS_TOKEN }}
-
-      - name: Configure Git Identity
-        run: |
-          git config --global user.name "$GIT_NAME"
-          git config --global user.email "$GIT_EMAIL"
-
-      - name: Update README and Cleanup
-        env:
-          SCHEDULED_DATE: ${{ needs.check_update.outputs.scheduled_date }}
-        run: |
-          DAY=$(TZ="$TZ" date +'%d' | sed 's/^0//')
-          case "$DAY" in
-            1|21|31) SUFFIX="st" ;;
-            2|22)    SUFFIX="nd" ;;
-            3|23)    SUFFIX="rd" ;;
-            *)       SUFFIX="th" ;;
-          esac
-
-          MONTH=$(TZ="$TZ" date +'%B')
-          YEAR=$(TZ="$TZ" date +'%Y')
-          DATE_FMT="${MONTH} ${DAY}${SUFFIX}, ${YEAR}"
-          DATE_ESCAPED=$(printf '%s' "$DATE_FMT" | sed -E 's/ /%20/g; s/,/%2C/g')
-
-          sed -i -E "s|(Last%20Updated-)[^-)]*|\1${DATE_ESCAPED}|g" README.md
-
-          git rm -f "$UPDATE_FILE"
-          git add README.md
-          git commit -m "Updated README date to ${DATE_FMT}"
-
-          git reset --soft HEAD~2
-          ORIGINAL_MSG=$(git log -1 --pretty=%B HEAD)
-
-          COMMIT_PHX=$(TZ="$TZ" date -d "$SCHEDULED_DATE 12:00" +"%Y-%m-%dT%H:%M:%S %z")
-          GIT_COMMITTER_DATE="$COMMIT_PHX" GIT_AUTHOR_DATE="$COMMIT_PHX" git commit -m "$ORIGINAL_MSG"
-
-      - name: Wait Until Noon ${{ env.TZ }}
-        run: |
-          NOW=$(TZ="$TZ" date +%s)
-          TARGET=$(TZ="$TZ" date -d "12:00" +%s)
-
-          if [ "$NOW" -lt "$TARGET" ]; then
-            sleep $((TARGET - NOW))
-          fi
-
-      - name: Push and Sync Branches
-        run: |
-          git push origin "$BRANCH_STAGING" --force
-          git fetch origin "$BRANCH_FROGPILOT:$BRANCH_FROGPILOT"
-          git push origin "$BRANCH_FROGPILOT:$BRANCH_PREVIOUS" --force
-          git push origin "$BRANCH_STAGING:$BRANCH_FROGPILOT" --force

.github/workflows/update_tinygrad.yaml

@@ -1,95 +0,0 @@
-name: Update Tinygrad
-
-on:
-  workflow_dispatch:
-    inputs:
-      runner:
-        description: "Select runner"
-        type: choice
-        options:
-          - c3
-          - c3x
-        default: "c3"
-        required: true
-
-env:
-  GIT_EMAIL: "91348155+FrogAi@users.noreply.github.com"
-  GIT_NAME: "James"
-  GITLAB_REPO_DIR: "FrogPilot-Resources"
-  GITLAB_URL: "gitlab.com/FrogAi/FrogPilot-Resources.git"
-  OPENPILOT_DIR: "/data/openpilot"
-
-jobs:
-  update_tinygrad:
-    runs-on: [self-hosted, "${{ inputs.runner }}"]
-    steps:
-      - name: Get Version
-        id: get_version
-        run: |
-          VERSION=$(grep -oP '^VERSION\s*=\s*"\K[^"]+' "$OPENPILOT_DIR/frogpilot/assets/model_manager.py")
-          echo "VERSION=$VERSION"
-          echo "version=$VERSION" >> "$GITHUB_OUTPUT"
-
-      - name: Setup Workspace and Clone GitLab
-        id: setup
-        env:
-          GITLAB_TOKEN: ${{ secrets.GITLAB_TOKEN }}
-        run: |
-          WORK_DIR="$RUNNER_TEMP/frogpilot_tinygrad"
-          rm -rf "$WORK_DIR" && mkdir -p "$WORK_DIR"
-          echo "work_dir=$WORK_DIR" >> "$GITHUB_OUTPUT"
-
-          cd "$WORK_DIR"
-          git clone --depth 1 --branch Tinygrad "https://oauth2:${GITLAB_TOKEN}@$GITLAB_URL"
-
-      - name: Create Tinygrad Archive
-        working-directory: ${{ env.OPENPILOT_DIR }}
-        env:
-          WORK_DIR: ${{ steps.setup.outputs.work_dir }}
-          VERSION: ${{ steps.get_version.outputs.version }}
-        run: |
-          set -euo pipefail
-
-          ARCHIVE_DEST="$WORK_DIR/$GITLAB_REPO_DIR"
-          ARCHIVE_NAME="Tinygrad_$VERSION.tar.gz"
-
-          DUMMY_DIR=$(mktemp -d)
-          touch "$DUMMY_DIR/SConscript"
-
-          tar -czf "$ARCHIVE_DEST/$ARCHIVE_NAME" \
-            --exclude="*.a" \
-            --exclude="*.o" \
-            --exclude="*.onnx" \
-            --exclude="*__pycache__*" \
-            --exclude="*tests*" \
-            --exclude="selfdrive/modeld/SConscript" \
-            selfdrive/modeld tinygrad_repo \
-            -C "$DUMMY_DIR" \
-            --transform 's|^SConscript$|selfdrive/modeld/SConscript|' \
-            SConscript
-
-          rm -rf "$DUMMY_DIR"
-
-      - name: Push Updated Tinygrad
-        working-directory: ${{ steps.setup.outputs.work_dir }}/${{ env.GITLAB_REPO_DIR }}
-        env:
-          VERSION: ${{ steps.get_version.outputs.version }}
-        run: |
-          git config user.name "$GIT_NAME"
-          git config user.email "$GIT_EMAIL"
-
-          git add Tinygrad_*.tar.gz
-
-          if git diff --staged --quiet; then
-            echo "No changes to commit."
-          else
-            git commit -m "Updated Tinygrad: $VERSION"
-            git push origin Tinygrad
-          fi
-
-      - name: Cleanup Temporary Files
-        if: always()
-        env:
-          WORK_DIR: ${{ steps.setup.outputs.work_dir }}
-        run: |
-          rm -rf "$WORK_DIR"

.gitignore

@@ -1,25 +1,9 @@
-venv/
-.venv/
-.ci_cache
-.env
-.clang-format
 .DS_Store
 .tags
 .ipynb_checkpoints
 .idea
-.overlay_init
-.overlay_consistent
-.sconsign.dblite
-a.out
-.hypothesis
-.cache/
-.comma_sysroot/
-.venv-linux-arm64/
+model2.png
 
-/docs_site/
-
-*.mp4
-*.dylib
 *.DSYM
 *.d
 *.pyc
@@ -27,108 +11,20 @@ a.out
 .*.swp
 .*.swo
 .*.un~
-*.tmp
 *.o
-*.o-*
-*.os
-*.os-*
 *.so
 *.a
 *.clb
 *.class
 *.pyxbldc
 *.vcd
-*.mo
-*_pyx.cpp
-*.stats
 config.json
 clcache
-compile_commands.json
-compare_runtime*.html
 
-cereal/services.h
-cereal/gen
-selfdrive/ui/translations/tmp
-selfdrive/car/tests/cars_dump
-system/camerad/test/ae_gray_test
-selfdrive/ui/ui.macos
-selfdrive/ui/ui.larch64
+board/obj/
+selfdrive/boardd/boardd
+selfdrive/logcatd/logcatd
+selfdrive/proclogd/proclogd
+selfdrive/ui/ui
+/src/
 
-.coverage*
-coverage.xml
-htmlcov
-pandaextra
-
-.mypy_cache/
-flycheck_*
-
-cppcheck_report.txt
-comma*.sh
-
-selfdrive/modeld/models/*.pkl
-!selfdrive/modeld/models/driving_vision_tinygrad.pkl
-!selfdrive/modeld/models/driving_policy_tinygrad.pkl
-!selfdrive/modeld/models/driving_vision_metadata.pkl
-!selfdrive/modeld/models/driving_policy_metadata.pkl
-!selfdrive/modeld/models/dmonitoring_model_tinygrad.pkl
-!selfdrive/modeld/models/dmonitoring_model_metadata.pkl
-!selfdrive/modeld/models/warp_1928x1208_tinygrad.pkl
-!selfdrive/modeld/models/warp_1344x760_tinygrad.pkl
-!selfdrive/modeld/models/dm_warp_1928x1208_tinygrad.pkl
-!selfdrive/modeld/models/dm_warp_1344x760_tinygrad.pkl
-
-# openpilot log files
-*.bz2
-*.zst
-
-build/
-
-!**/.gitkeep
-
-poetry.toml
-Pipfile
-
-### VisualStudioCode ###
-.vscode/*
-!.vscode/settings.json
-!.vscode/tasks.json
-!.vscode/launch.json
-!.vscode/extensions.json
-!.vscode/*.code-snippets
-
-# Local History for Visual Studio Code
-.history/
-
-# Built Visual Studio Code Extensions
-*.vsix
-
-### VisualStudioCode Patch ###
-# Ignore all local history of files
-.history
-.ionide
-
-# Keep prebuilt runtime artifacts trackable
-!cereal/messaging/bridge
-!system/camerad/camerad
-!system/loggerd/loggerd
-!system/loggerd/encoderd
-!system/loggerd/bootlog
-!selfdrive/pandad/pandad
-!cereal/services.h
-!cereal/libcereal.a
-!cereal/libsocketmaster.a
-!common/params_pyx.so
-!common/params_pyx.cpp
-!common/transformations/transformations.so
-!selfdrive/modeld/models/commonmodel_pyx.so
-!selfdrive/pandad/pandad_api_impl.so
-!selfdrive/controls/lib/lateral_mpc_lib/c_generated_code/acados_ocp_solver_pyx.so
-!selfdrive/controls/lib/lateral_mpc_lib/c_generated_code/libacados_ocp_solver_lat.so
-!selfdrive/controls/lib/longitudinal_mpc_lib/c_generated_code/acados_ocp_solver_pyx.so
-!selfdrive/controls/lib/longitudinal_mpc_lib/c_generated_code/libacados_ocp_solver_long.so
-!common/libcommon.a
-!msgq_repo/msgq/ipc_pyx.so
-!msgq_repo/msgq/visionipc/visionipc_pyx.so
-!rednose_repo/rednose/helpers/ekf_sym_pyx.so
-!panda/board/obj/
-!panda/board/obj/**

.travis.yml

@@ -0,0 +1,12 @@
+sudo: required
+
+services:
+  - docker
+
+install:
+  - docker build -t tmppilot -f Dockerfile.openpilot .
+
+script:
+  - docker run --rm
+      -v "$(pwd)"/selfdrive/test/tests/plant/out:/tmp/openpilot/selfdrive/test/tests/plant/out
+      tmppilot /bin/sh -c 'cd /tmp/openpilot/selfdrive/test/tests/plant && OPTEST=1 ./test_longitudinal.py'

.vscode/extensions.json

@@ -1,9 +0,0 @@
-{
-  "recommendations": [
-    "ms-python.python",
-    "ms-vscode.cpptools",
-    "elagil.pre-commit-helper",
-    "charliermarsh.ruff",
-    "openai.chatgpt",
-  ]
-}

.vscode/launch.json

@@ -1,85 +0,0 @@
-{
-  "version": "0.2.0",
-  "inputs": [
-    {
-      "id": "python_process",
-      "type": "pickString",
-      "description": "Select the process to debug",
-      "options": [
-        "selfdrive/controls/controlsd.py",
-        "system/timed/timed.py",
-        "tools/sim/run_bridge.py"
-      ]
-    },
-    {
-      "id": "cpp_process",
-      "type": "pickString",
-      "description": "Select the process to debug",
-      "options": [
-        "selfdrive/ui/ui"
-      ]
-    },
-    {
-      "id": "args",
-      "description": "Arguments to pass to the process",
-      "type": "promptString"
-    },
-    {
-      "id": "replayArg",
-      "type": "promptString",
-      "description": "Enter route or segment to replay."
-    }
-  ],
-  "configurations": [
-    {
-      "name": "Python: openpilot Process",
-      "type": "debugpy",
-      "request": "launch",
-      "program": "${input:python_process}",
-      "console": "integratedTerminal",
-      "justMyCode": true,
-      "args": "${input:args}"
-    },
-    {
-      "name": "C++: openpilot Process",
-      "type": "cppdbg",
-      "request": "launch",
-      "program": "${workspaceFolder}/${input:cpp_process}",
-      "cwd": "${workspaceFolder}"
-    },
-    {
-      "name": "Attach LLDB to Replay drive",
-      "type": "lldb",
-      "request": "attach",
-      "pid": "${command:pickMyProcess}",
-      "initCommands": [
-        "script import time; time.sleep(3)"
-      ]
-    },
-    {
-      "name": "Replay drive",
-      "type": "debugpy",
-      "request": "launch",
-      "program": "${workspaceFolder}/opendbc/safety/tests/safety_replay/replay_drive.py",
-      "args": [
-        "${input:replayArg}"
-      ],
-      "console": "integratedTerminal",
-      "justMyCode": false,
-      "env": {
-        "PYTHONPATH": "${workspaceFolder}"
-      },
-      "subProcess": true,
-      "stopOnEntry": false
-    }
-  ],
-  "compounds": [
-    {
-      "name": "Replay drive + Safety LLDB",
-      "configurations": [
-        "Replay drive",
-        "Attach LLDB to Replay drive"
-      ]
-    }
-  ]
-}

.vscode/settings.json

@@ -1,27 +0,0 @@
-{
-  "editor.tabSize": 2,
-  "editor.insertSpaces": true,
-  "editor.renderWhitespace": "trailing",
-  "files.trimTrailingWhitespace": true,
-  "search.exclude": {
-    "**/.git": true,
-    "**/.venv": true,
-    "**/__pycache__": true
-  },
-  "files.exclude": {
-    "**/.git": true,
-    "**/.venv": true,
-    "**/__pycache__": true
-  },
-  "python.analysis.exclude": [
-    "**/.git",
-    "**/.venv",
-    "**/__pycache__",
-    // exclude directories that should be using the symlinked version
-    "common/**",
-    "selfdrive/**",
-    "system/**",
-    "third_party/**",
-    "tools/**",
-  ]
-}

Dockerfile.openpilot

@@ -1,14 +1,19 @@
-FROM ghcr.io/commaai/openpilot-base:latest
+FROM ubuntu:16.04
+ENV PYTHONUNBUFFERED 1
 
-ENV PYTHONUNBUFFERED=1
+RUN apt-get update && apt-get install -y build-essential clang vim screen wget bzip2 git libglib2.0-0 python-pip capnproto libcapnp-dev libzmq5-dev libffi-dev libusb-1.0-0
+RUN pip install numpy==1.11.2 scipy==0.18.1 matplotlib
 
-ENV OPENPILOT_PATH=/home/batman/openpilot
+COPY requirements_openpilot.txt /tmp/
+RUN pip install -r /tmp/requirements_openpilot.txt
 
-RUN mkdir -p ${OPENPILOT_PATH}
-WORKDIR ${OPENPILOT_PATH}
+ENV PYTHONPATH /tmp/openpilot:$PYTHONPATH
 
-COPY . ${OPENPILOT_PATH}/
+COPY ./common /tmp/openpilot/common
+COPY ./cereal /tmp/openpilot/cereal
+COPY ./opendbc /tmp/openpilot/opendbc
+COPY ./selfdrive /tmp/openpilot/selfdrive
+COPY ./phonelibs /tmp/openpilot/phonelibs
+COPY ./pyextra /tmp/openpilot/pyextra
 
-ENV UV_BIN="/home/batman/.local/bin/"
-ENV PATH="$UV_BIN:$PATH"
-RUN UV_PROJECT_ENVIRONMENT=$VIRTUAL_ENV uv run scons --cache-readonly -j$(nproc)
+RUN mkdir -p /tmp/openpilot/selfdrive/test/out

Dockerfile.openpilot_base

@@ -1,81 +0,0 @@
-FROM ubuntu:24.04
-
-ENV PYTHONUNBUFFERED=1
-
-ENV DEBIAN_FRONTEND=noninteractive
-RUN apt-get update && \
-    apt-get install -y --no-install-recommends sudo tzdata locales ssh pulseaudio xvfb x11-xserver-utils gnome-screenshot python3-tk python3-dev && \
-    rm -rf /var/lib/apt/lists/*
-
-RUN sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen && locale-gen
-ENV LANG=en_US.UTF-8
-ENV LANGUAGE=en_US:en
-ENV LC_ALL=en_US.UTF-8
-
-COPY tools/install_ubuntu_dependencies.sh /tmp/tools/
-RUN /tmp/tools/install_ubuntu_dependencies.sh && \
-    rm -rf /var/lib/apt/lists/* /tmp/* && \
-    cd /usr/lib/gcc/arm-none-eabi/* && \
-    rm -rf arm/ thumb/nofp thumb/v6* thumb/v8* thumb/v7+fp thumb/v7-r+fp.sp
-
-# Add OpenCL
-RUN apt-get update && apt-get install -y --no-install-recommends \
-    apt-utils \
-    alien \
-    unzip \
-    tar \
-    curl \
-    xz-utils \
-    dbus \
-    gcc-arm-none-eabi \
-    tmux \
-    vim \
-    libx11-6 \
-    wget \
-  && rm -rf /var/lib/apt/lists/*
-
-RUN mkdir -p /tmp/opencl-driver-intel && \
-    cd /tmp/opencl-driver-intel && \
-    wget https://github.com/intel/llvm/releases/download/2024-WW14/oclcpuexp-2024.17.3.0.09_rel.tar.gz && \
-    wget https://github.com/oneapi-src/oneTBB/releases/download/v2021.12.0/oneapi-tbb-2021.12.0-lin.tgz && \
-    mkdir -p /opt/intel/oclcpuexp_2024.17.3.0.09_rel && \
-    cd /opt/intel/oclcpuexp_2024.17.3.0.09_rel && \
-    tar -zxvf /tmp/opencl-driver-intel/oclcpuexp-2024.17.3.0.09_rel.tar.gz && \
-    mkdir -p /etc/OpenCL/vendors && \
-    echo /opt/intel/oclcpuexp_2024.17.3.0.09_rel/x64/libintelocl.so > /etc/OpenCL/vendors/intel_expcpu.icd && \
-    cd /opt/intel && \
-    tar -zxvf /tmp/opencl-driver-intel/oneapi-tbb-2021.12.0-lin.tgz && \
-    ln -s /opt/intel/oneapi-tbb-2021.12.0/lib/intel64/gcc4.8/libtbb.so /opt/intel/oclcpuexp_2024.17.3.0.09_rel/x64 && \
-    ln -s /opt/intel/oneapi-tbb-2021.12.0/lib/intel64/gcc4.8/libtbbmalloc.so /opt/intel/oclcpuexp_2024.17.3.0.09_rel/x64 && \
-    ln -s /opt/intel/oneapi-tbb-2021.12.0/lib/intel64/gcc4.8/libtbb.so.12 /opt/intel/oclcpuexp_2024.17.3.0.09_rel/x64 && \
-    ln -s /opt/intel/oneapi-tbb-2021.12.0/lib/intel64/gcc4.8/libtbbmalloc.so.2 /opt/intel/oclcpuexp_2024.17.3.0.09_rel/x64 && \
-    mkdir -p /etc/ld.so.conf.d && \
-    echo /opt/intel/oclcpuexp_2024.17.3.0.09_rel/x64 > /etc/ld.so.conf.d/libintelopenclexp.conf && \
-    ldconfig -f /etc/ld.so.conf.d/libintelopenclexp.conf && \
-    cd / && \
-    rm -rf /tmp/opencl-driver-intel
-
-ENV NVIDIA_VISIBLE_DEVICES=all
-ENV NVIDIA_DRIVER_CAPABILITIES=graphics,utility,compute
-ENV QTWEBENGINE_DISABLE_SANDBOX=1
-
-RUN dbus-uuidgen > /etc/machine-id
-
-ARG USER=batman
-ARG USER_UID=1001
-RUN useradd -m -s /bin/bash -u $USER_UID $USER
-RUN usermod -aG sudo $USER
-RUN echo '%sudo ALL=(ALL) NOPASSWD:ALL' >> /etc/sudoers
-USER $USER
-
-COPY --chown=$USER pyproject.toml uv.lock /home/$USER
-COPY --chown=$USER tools/install_python_dependencies.sh /home/$USER/tools/
-
-ENV VIRTUAL_ENV=/home/$USER/.venv
-ENV PATH="$VIRTUAL_ENV/bin:$PATH"
-RUN cd /home/$USER && \
-    tools/install_python_dependencies.sh && \
-    rm -rf tools/ pyproject.toml uv.lock .cache
-
-USER root
-RUN sudo git config --global --add safe.directory /tmp/openpilot

Jenkinsfile

@@ -1,269 +0,0 @@
-def retryWithDelay(int maxRetries, int delay, Closure body) {
-  for (int i = 0; i < maxRetries; i++) {
-    try {
-      return body()
-    } catch (Exception e) {
-      sleep(delay)
-    }
-  }
-  throw Exception("Failed after ${maxRetries} retries")
-}
-
-def device(String ip, String step_label, String cmd) {
-  withCredentials([file(credentialsId: 'id_rsa', variable: 'key_file')]) {
-    def ssh_cmd = """
-ssh -o ConnectTimeout=5 -o ServerAliveInterval=5 -o ServerAliveCountMax=2 -o BatchMode=yes -o StrictHostKeyChecking=no -i ${key_file} 'comma@${ip}' exec /usr/bin/bash <<'END'
-
-set -e
-
-export TERM=xterm-256color
-
-shopt -s huponexit # kill all child processes when the shell exits
-
-export CI=1
-export PYTHONWARNINGS=error
-export LOGPRINT=debug
-export TEST_DIR=${env.TEST_DIR}
-export SOURCE_DIR=${env.SOURCE_DIR}
-export GIT_BRANCH=${env.GIT_BRANCH}
-export GIT_COMMIT=${env.GIT_COMMIT}
-export CI_ARTIFACTS_TOKEN=${env.CI_ARTIFACTS_TOKEN}
-export GITHUB_COMMENTS_TOKEN=${env.GITHUB_COMMENTS_TOKEN}
-export AZURE_TOKEN='${env.AZURE_TOKEN}'
-# only use 1 thread for tici tests since most require HIL
-export PYTEST_ADDOPTS="-n0 -s"
-
-
-export GIT_SSH_COMMAND="ssh -i /data/gitkey"
-
-source ~/.bash_profile
-if [ -f /TICI ]; then
-  source /etc/profile
-
-  rm -rf /tmp/tmp*
-  rm -rf ~/.commacache
-  rm -rf /dev/shm/*
-  rm -rf /dev/tmp/tmp*
-
-  if ! systemctl is-active --quiet systemd-resolved; then
-    echo "restarting resolved"
-    sudo systemctl start systemd-resolved
-    sleep 3
-  fi
-
-  # restart aux USB
-  if [ -e /sys/bus/usb/drivers/hub/3-0:1.0 ]; then
-    echo "restarting aux usb"
-    echo "3-0:1.0" | sudo tee /sys/bus/usb/drivers/hub/unbind
-    sleep 0.5
-    echo "3-0:1.0" | sudo tee /sys/bus/usb/drivers/hub/bind
-  fi
-fi
-if [ -f /data/openpilot/launch_env.sh ]; then
-  source /data/openpilot/launch_env.sh
-fi
-
-ln -snf ${env.TEST_DIR} /data/pythonpath
-
-cd ${env.TEST_DIR} || true
-time ${cmd}
-END"""
-
-    sh script: ssh_cmd, label: step_label
-  }
-}
-
-def deviceStage(String stageName, String deviceType, List extra_env, def steps) {
-  stage(stageName) {
-    if (currentBuild.result != null) {
-        return
-    }
-
-    if (isReplay()) {
-      error("REPLAYING TESTS IS NOT ALLOWED. FIX THEM INSTEAD.")
-    }
-
-    def extra = extra_env.collect { "export ${it}" }.join('\n');
-    def branch = env.BRANCH_NAME ?: 'master';
-    def gitDiff = sh returnStdout: true, script: 'curl -s -H "Authorization: Bearer ${GITHUB_COMMENTS_TOKEN}" https://api.github.com/repos/commaai/openpilot/compare/master...${GIT_BRANCH} | jq .files[].filename || echo "/"', label: 'Getting changes'
-
-    lock(resource: "", label: deviceType, inversePrecedence: true, variable: 'device_ip', quantity: 1, resourceSelectStrategy: 'random') {
-      docker.image('ghcr.io/commaai/alpine-ssh').inside('--user=root') {
-        timeout(time: 35, unit: 'MINUTES') {
-          retry (3) {
-            def date = sh(script: 'date', returnStdout: true).trim();
-            device(device_ip, "set time", "date -s '" + date + "'")
-            device(device_ip, "git checkout", extra + "\n" + readFile("selfdrive/test/setup_device_ci.sh"))
-          }
-          steps.each { item ->
-            def name = item[0]
-            def cmd = item[1]
-
-            def args = item[2]
-            def diffPaths = args.diffPaths ?: []
-            def cmdTimeout = args.timeout ?: 9999
-
-            if (branch != "master" && !branch.contains("__jenkins_loop_") && diffPaths && !hasPathChanged(gitDiff, diffPaths)) {
-              println "Skipping ${name}: no changes in ${diffPaths}."
-              return
-            } else {
-              timeout(time: cmdTimeout, unit: 'SECONDS') {
-                device(device_ip, name, cmd)
-              }
-            }
-          }
-        }
-      }
-    }
-  }
-}
-
-def hasPathChanged(String gitDiff, List<String> paths) {
-  for (path in paths) {
-    if (gitDiff.contains(path)) {
-      return true
-    }
-  }
-  return false
-}
-
-def isReplay() {
-  def replayClass = "org.jenkinsci.plugins.workflow.cps.replay.ReplayCause"
-  return currentBuild.rawBuild.getCauses().any{ cause -> cause.toString().contains(replayClass) }
-}
-
-def setupCredentials() {
-  withCredentials([
-    string(credentialsId: 'azure_token', variable: 'AZURE_TOKEN'),
-  ]) {
-    env.AZURE_TOKEN = "${AZURE_TOKEN}"
-  }
-
-  withCredentials([
-    string(credentialsId: 'ci_artifacts_pat', variable: 'CI_ARTIFACTS_TOKEN'),
-  ]) {
-    env.CI_ARTIFACTS_TOKEN = "${CI_ARTIFACTS_TOKEN}"
-  }
-
-  withCredentials([
-    string(credentialsId: 'post_comments_github_pat', variable: 'GITHUB_COMMENTS_TOKEN'),
-  ]) {
-    env.GITHUB_COMMENTS_TOKEN = "${GITHUB_COMMENTS_TOKEN}"
-  }
-}
-
-def step(String name, String cmd, Map args = [:]) {
-  return [name, cmd, args]
-}
-
-node {
-  env.CI = "1"
-  env.PYTHONWARNINGS = "error"
-  env.TEST_DIR = "/data/openpilot"
-  env.SOURCE_DIR = "/data/openpilot_source/"
-  setupCredentials()
-
-  env.GIT_BRANCH = checkout(scm).GIT_BRANCH
-  env.GIT_COMMIT = checkout(scm).GIT_COMMIT
-
-  def excludeBranches = ['__nightly', 'devel', 'devel-staging', 'release3', 'release3-staging',
-                         'release-tici', 'release-tizi', 'release-tizi-staging', 'testing-closet*', 'hotfix-*']
-  def excludeRegex = excludeBranches.join('|').replaceAll('\\*', '.*')
-
-  if (env.BRANCH_NAME != 'master' && !env.BRANCH_NAME.contains('__jenkins_loop_')) {
-    properties([
-        disableConcurrentBuilds(abortPrevious: true)
-    ])
-  }
-
-  try {
-    if (env.BRANCH_NAME == 'devel-staging') {
-      deviceStage("build release-tizi-staging", "tizi-needs-can", [], [
-        step("build release-tizi-staging", "RELEASE_BRANCH=release-tizi-staging $SOURCE_DIR/release/build_release.sh"),
-      ])
-    }
-
-    if (env.BRANCH_NAME == '__nightly') {
-      parallel (
-        'nightly': {
-          deviceStage("build nightly", "tizi-needs-can", [], [
-            step("build nightly", "RELEASE_BRANCH=nightly $SOURCE_DIR/release/build_release.sh"),
-          ])
-        },
-        'nightly-dev': {
-          deviceStage("build nightly-dev", "tizi-needs-can", [], [
-            step("build nightly-dev", "PANDA_DEBUG_BUILD=1 RELEASE_BRANCH=nightly-dev $SOURCE_DIR/release/build_release.sh"),
-          ])
-        },
-      )
-    }
-
-    if (!env.BRANCH_NAME.matches(excludeRegex)) {
-    parallel (
-      'onroad tests': {
-        deviceStage("onroad", "tizi-needs-can", ["UNSAFE=1"], [
-          step("build openpilot", "cd system/manager && ./build.py"),
-          step("check dirty", "release/check-dirty.sh"),
-          step("onroad tests", "pytest selfdrive/test/test_onroad.py -s", [timeout: 60]),
-        ])
-      },
-      'HW + Unit Tests': {
-        deviceStage("tizi-hardware", "tizi-common", ["UNSAFE=1"], [
-          step("build", "cd system/manager && ./build.py"),
-          step("test pandad", "pytest selfdrive/pandad/tests/test_pandad.py", [diffPaths: ["panda", "selfdrive/pandad/"]]),
-          step("test power draw", "pytest -s system/hardware/tici/tests/test_power_draw.py"),
-          step("test encoder", "LD_LIBRARY_PATH=/usr/local/lib pytest system/loggerd/tests/test_encoder.py", [diffPaths: ["system/loggerd/"]]),
-          step("test manager", "pytest system/manager/test/test_manager.py"),
-        ])
-      },
-      'loopback': {
-        deviceStage("loopback", "tizi-loopback", ["UNSAFE=1"], [
-          step("build openpilot", "cd system/manager && ./build.py"),
-          step("test pandad loopback", "pytest selfdrive/pandad/tests/test_pandad_loopback.py"),
-        ])
-      },
-      'camerad OX03C10': {
-        deviceStage("OX03C10", "tizi-ox03c10", ["UNSAFE=1"], [
-          step("build", "cd system/manager && ./build.py"),
-          step("test camerad", "pytest system/camerad/test/test_camerad.py", [timeout: 60]),
-          step("test exposure", "pytest system/camerad/test/test_exposure.py"),
-        ])
-      },
-      'camerad OS04C10': {
-        deviceStage("OS04C10", "tici-os04c10", ["UNSAFE=1"], [
-          step("build", "cd system/manager && ./build.py"),
-          step("test camerad", "pytest system/camerad/test/test_camerad.py", [timeout: 60]),
-          step("test exposure", "pytest system/camerad/test/test_exposure.py"),
-        ])
-      },
-      'sensord': {
-        deviceStage("LSM + MMC", "tizi-lsmc", ["UNSAFE=1"], [
-          step("build", "cd system/manager && ./build.py"),
-          step("test sensord", "pytest system/sensord/tests/test_sensord.py"),
-        ])
-      },
-      'replay': {
-        deviceStage("model-replay", "tizi-replay", ["UNSAFE=1"], [
-          step("build", "cd system/manager && ./build.py", [diffPaths: ["selfdrive/modeld/", "tinygrad_repo", "selfdrive/test/process_replay/model_replay.py"]]),
-          step("model replay", "selfdrive/test/process_replay/model_replay.py", [diffPaths: ["selfdrive/modeld/", "tinygrad_repo", "selfdrive/test/process_replay/model_replay.py"]]),
-        ])
-      },
-      'tizi': {
-        deviceStage("tizi", "tizi", ["UNSAFE=1"], [
-          step("build openpilot", "cd system/manager && ./build.py"),
-          step("test pandad loopback", "SINGLE_PANDA=1 pytest selfdrive/pandad/tests/test_pandad_loopback.py"),
-          step("test pandad spi", "pytest selfdrive/pandad/tests/test_pandad_spi.py"),
-          step("test amp", "pytest system/hardware/tici/tests/test_amplifier.py"),
-          // TODO: enable once new AGNOS is available
-          // step("test esim", "pytest system/hardware/tici/tests/test_esim.py"),
-          step("test qcomgpsd", "pytest system/qcomgpsd/tests/test_qcomgpsd.py", [diffPaths: ["system/qcomgpsd/"]]),
-        ])
-      },
-
-    )
-    }
-  } catch (Exception e) {
-    currentBuild.result = 'FAILED'
-    throw e
-  }
-}

LICENSE

@@ -1,7 +0,0 @@
-Copyright (c) 2018, Comma.ai, Inc.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

LICENSE.openpilot

@@ -0,0 +1,7 @@
+Copyright (c) 2016, Comma.ai, Inc.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Makefile

@@ -0,0 +1,9 @@
+
+code_dir := $(shell pwd)
+
+# TODO: Add a global build system
+
+.PHONY: all
+all:
+	cd selfdrive && PYTHONPATH=$(code_dir) PREPAREONLY=1 ./manager.py
+

README.md

@@ -1,252 +1,153 @@
-<div align="center" style="text-align: center;">
+Welcome to openpilot
+======
 
-<h1>openpilot</h1>
+[openpilot](http://github.com/commaai/openpilot) is an open source driving agent.
 
-<p>
-  <b>openpilot is an operating system for robotics.</b>
-  <br>
-  Currently, it upgrades the driver assistance system in 300+ supported cars.
-</p>
+Currently it performs the functions of Adaptive Cruise Control (ACC) and Lane Keeping Assist System (LKAS) for Hondas, Acuras and Toyotas. It's about on par with Tesla Autopilot at launch, and better than [all other manufacturers](http://www.thedrive.com/tech/5707/the-war-for-autonomous-driving-part-iii-us-vs-germany-vs-japan).
 
-<h3>
-  <a href="https://docs.comma.ai">Docs</a>
-  <span> · </span>
-  <a href="https://docs.comma.ai/contributing/roadmap/">Roadmap</a>
-  <span> · </span>
-  <a href="https://github.com/commaai/openpilot/blob/master/docs/CONTRIBUTING.md">Contribute</a>
-  <span> · </span>
-  <a href="https://discord.comma.ai">Community</a>
-  <span> · </span>
-  <a href="https://comma.ai/shop">Try it on a comma 3X</a>
-</h3>
+The openpilot codebase has been written to be concise and enable rapid prototyping. We look forward to your contributions - improving real vehicle automation has never been easier.
 
-Quick start: `bash <(curl -fsSL openpilot.comma.ai)`
+Here are [some](https://www.youtube.com/watch?v=9OwTJFuDI7g) [videos](https://www.youtube.com/watch?v=64Wvt5pYQmE) [of](https://www.youtube.com/watch?v=6IW7Nejsr3A) [it](https://www.youtube.com/watch?v=-VN1YcC83nA) [running](https://www.youtube.com/watch?v=EQJZvVeihZk). And a really cool [tutorial](https://www.youtube.com/watch?v=PwOnsT2UW5o).
 
-[![openpilot tests](https://github.com/commaai/openpilot/actions/workflows/selfdrive_tests.yaml/badge.svg)](https://github.com/commaai/openpilot/actions/workflows/selfdrive_tests.yaml)
-[![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](LICENSE)
-[![X Follow](https://img.shields.io/twitter/follow/comma_ai)](https://x.com/comma_ai)
-[![Discord](https://img.shields.io/discord/469524606043160576)](https://discord.comma.ai)
-
-</div>
-
-<table>
-  <tr>
-    <td><a href="https://youtu.be/NmBfgOanCyk" title="Video By Greer Viau"><img src="https://github.com/commaai/openpilot/assets/8762862/2f7112ae-f748-4f39-b617-fabd689c3772"></a></td>
-    <td><a href="https://youtu.be/VHKyqZ7t8Gw" title="Video By Logan LeGrand"><img src="https://github.com/commaai/openpilot/assets/8762862/92351544-2833-40d7-9e0b-7ef7ae37ec4c"></a></td>
-    <td><a href="https://youtu.be/SUIZYzxtMQs" title="A drive to Taco Bell"><img src="https://github.com/commaai/openpilot/assets/8762862/05ceefc5-2628-439c-a9b2-89ce77dc6f63"></a></td>
-  </tr>
-</table>
-
-
-Using openpilot in a car
+Hardware
 ------
 
-To use openpilot in a car, you need four things:
-1. **Supported Device:** a comma 3/3X, available at [comma.ai/shop](https://comma.ai/shop/comma-3x).
-2. **Software:** The setup procedure for the comma 3/3X allows users to enter a URL for custom software. Use the URL `openpilot.comma.ai` to install the release version.
-3. **Supported Car:** Ensure that you have one of [the 275+ supported cars](docs/CARS.md).
-4. **Car Harness:** You will also need a [car harness](https://comma.ai/shop/car-harness) to connect your comma 3/3X to your car.
+Right now openpilot supports the [NEO research platform](http://github.com/commaai/neo) and the [EON Dashcam DevKit](https://shop.comma.ai/products/eon-dashcam-devkit). We'd like to support other platforms as well.
 
-We have detailed instructions for [how to install the harness and device in a car](https://comma.ai/setup). Note that it's possible to run openpilot on [other hardware](https://blog.comma.ai/self-driving-car-for-free/), although it's not plug-and-play.
+Install openpilot on a neo device by entering ``https://openpilot.comma.ai`` during NEOS setup.
 
+Supported Cars
 ------
 
-<div align="center" style="text-align: center;">
+- Acura ILX 2016 with AcuraWatch Plus
+  - Due to use of the cruise control for gas, it can only be enabled above 25 mph
 
-<h1>FrogPilot 🐸</h1>
+- Honda Civic 2016-2017 with Honda Sensing
+  - Due to limitations in steering firmware, steering is disabled below 12 mph
+  - Note that the hatchback model is not supported
 
-[![Ask DeepWiki](https://deepwiki.com/badge.svg)](https://deepwiki.com/FrogAi/FrogPilot)
-[![Discord](https://img.shields.io/discord/1137853399715549214?label=Discord)](https://discord.frogpilot.com)
-[![Last Updated](https://img.shields.io/badge/Last%20Updated-October%2018th%2C%202025-brightgreen)](https://github.com/FrogAi/FrogPilot/releases/latest)
-[![Wiki](https://img.shields.io/badge/Wiki-FrogPilot-blue?logo=wiki)](https://frogpilot.wiki.gg/)
+- Honda CR-V Touring 2015-2016
+  - Can only be enabled above 25 mph
 
-</div>
+- Honda Odyssey 2018 with Honda Sensing (alpha!)
+  - Can only be enabled above 25 mph
 
+- Acura RDX 2018 with AcuraWatch Plus (alpha!)
+  - Can only be enabled above 25 mph
+
+- Toyota RAV-4 2016+ non-hybrid with TSS-P
+  - By default it uses stock Toyota ACC for longitudinal control
+  - openpilot longitudinal control available after unplugging the [Driving Support ECU](https://community.comma.ai/wiki/index.php/Toyota#Rav4_.28for_openpilot.29) and can be enabled above 20 mph
+
+- Toyota Prius 2017 (alpha!)
+  - By default it uses stock Toyota ACC for longitudinal control
+  - openpilot longitudinal control available after unplugging the [Driving Support ECU](https://community.comma.ai/wiki/index.php/Toyota#Prius_.28for_openpilot.29)
+  - Lateral control needs improvements
+
+- Toyota RAV-4 2017 hybrid (alpha!)
+  - By default it uses stock Toyota ACC for longitudinal control
+  - openpilot longitudinal control available after unplugging the [Driving Support ECU](https://community.comma.ai/wiki/index.php/Toyota#Rav4_.28for_openpilot.29) and can do stop and go
+
+- Toyota Corolla 2017 (alpha!)
+  - By default it uses stock Toyota ACC for longitudinal control
+  - openpilot longitudinal control available after unplugging the [Driving Support ECU](https://community.comma.ai/wiki/index.php/Toyota#Corolla_.28for_openpilot.29) and can be enabled above 20 mph
+
+- Lexus RX 2017 hybrid (alpha!)
+  - By default it uses stock Lexus ACC for longitudinal control
+  - openpilot longitudinal control available after unplugging the [Driving Support ECU](https://community.comma.ai/wiki/index.php/Toyota#Lexus_RX_hybrid)
+
+In Progress Cars
+------
+- All TSS-P Toyota with Steering Assist.
+  - 'Full Speed Range Dynamic Radar Cruise Control' is required to enable stop-and-go. Only the Prius, Camry and C-HR have this option.
+  - Even though the Tundra, Sequoia and the Land Cruiser have TSS-P, they don't have Steering Assist and are not supported.
+- All LSS-P Lexus with Steering Assist or Lane Keep Assist.
+  - 'All-Speed Range Dynamic Radar Cruise Control' is required to enable stop-and-go. Only the GS, GSH, GS, F, RX, RXH, LX, NX, NXH, LC, LCH, LS, LSH have this option.
+  - Even though the LX have TSS-P, it does not have Steering Assist and is not supported.
+
+Community WIP Cars
 ------
 
-**FrogPilot** is a custom, community-driven, frog-themed fork of openpilot that grows and improves through the ideas and contributions of its users. It offers exciting new features and cutting-edge experiments that often arrive long before official releases. As an unofficial and highly experimental version of openpilot, **FrogPilot** should *always* be used with caution!
+- [Chevy Volt 2016-2018 Premier with Driver Confidence II](https://github.com/commaai/openpilot/pull/104)
 
-openpilot vs **FrogPilot**
+- [Classic Tesla Model S (pre-AP)](https://github.com/commaai/openpilot/pull/145)
+
+- [Honda Pilot 2017 with Honda Sensing](https://github.com/commaai/openpilot/pull/161)
+
+Directory structure
 ------
 
-#### Community
-| Feature | openpilot | **FrogPilot** |
-|---------|:---------:|:---------:|
-| A Welcoming Community | ❌ | ✅ |
-| Erich / Primary Moderators / 🦇 | ✅ | ❌ |
+- cereal        -- The messaging spec used for all logs on the phone
+- common        -- Library like functionality we've developed here
+- opendbc       -- Files showing how to interpret data from cars
+- panda         -- Code used to communicate on CAN and LIN
+- phonelibs     -- Libraries used on the phone
+- selfdrive     -- Code needed to drive the car
+  - assets        -- Fonts for ui
+  - boardd        -- Daemon to talk to the board
+  - car           -- Code that talks to the car and implements CarInterface
+  - common        -- Shared C/C++ code for the daemons
+  - controls      -- Python controls (PID loops etc) for the car
+  - debug         -- Tools to help you debug and do car ports
+  - logcatd       -- Android logcat as a service
+  - loggerd       -- Logger and uploader of car data
+  - proclogd      -- Logs information from proc
+  - sensord       -- IMU / GPS interface code
+  - test/plant    -- Car simulator running code through virtual maneuvers
+  - ui            -- The UI
+  - visiond       -- embedded vision pipeline
 
-#### Core Features
-| Feature | openpilot | **FrogPilot** |
-|---------|:---------:|:---------:|
-| Always On Lateral (Steering) | ❌ | ✅ |
-| Blind Spot Integration | ✅ | ✅ |
-| Conditional Experimental Mode | ❌ | ✅ |
-| Custom Themes | ❌ | ✅ |
-| Driver Monitoring | ✅ | ✅ |
-| Driving Model Selector | ❌ | ✅ |
-| Holiday Themes | ❌ | ✅ |
-| Speed Limit Support | ❌ | ✅ |
-| Weather Detection | ❌ | ✅ |
+To understand how the services interact, see `selfdrive/service_list.yaml`
 
-#### Device & Hardware
-| Feature | openpilot | **FrogPilot** |
-|---------|:---------:|:---------:|
-| Advanced Volume Controller | ❌ | ✅ |
-| Automatic Version Backups | ❌ | ✅ |
-| C3 Support | ❌ | ✅ |
-| comma Pedal Support | ❌ | ✅ |
-| High Quality Recordings | ❌ | ✅ |
-| SDSU Support | ❌ | ✅ |
-| ZSS Support | ❌ | ✅ |
-
-#### Gas/Brake
-| Feature | openpilot | **FrogPilot** |
-|---------|:---------:|:---------:|
-| Adaptive Cruise Control (ACC) | ✅ | ✅ |
-| Advanced Live Tuning | ❌ | ✅ |
-| Custom Following Distances | ❌ | ✅ |
-| Faster Human-Like Acceleration | ❌ | ✅ |
-| Human-Like Speed Control in Curves | ❌ | ✅ |
-| Smoother Human-Like Braking | ❌ | ✅ |
-
-#### Steering
-| Feature | openpilot | **FrogPilot** |
-|---------|:---------:|:---------:|
-| Advanced Live Tuning | ❌ | ✅ |
-| Automatic Lane Changes | ❌ | ✅ |
-| Increased Steering Torque* | ❌ | ✅ |
-| Lane Centering (LKAS) | ✅ | ✅ |
-| Lane Change Assist | ✅ | ✅ |
-
-*Select vehicles only
-
-And much much more!
-
-🌟 Highlight Features
+Testing on PC
 ------
 
-### 🚗 Always On Lateral (AOL)
+There is rudimentary infrastructure to run a basic simulation and generate a report of openpilot's behavior in different scenarios.
 
-With **"Always On Lateral"**, lane-centering stays active whenever cruise control is on, even when you press the accelerator or brake. This means steering assist won't cut out during manual speed adjustments giving you continuous support through curves, traffic, or mountain roads!
-
----
-
-### 🧠 Conditional Experimental Mode (CEM)
-
-**["Experimental Mode"](https://blog.comma.ai/090release/#experimental-mode)** lets openpilot drive at the speed it thinks a human would to allow slowing for curves, stopping at stoplights/stop signs, and adapting to traffic. This makes it powerful in complex scenarios, but it's still, well, "experimental" and less predictable than **"Chill Mode"**. But **"Conditional Experimental Mode"** gives you the best of both worlds by automatically switching between **"Chill Mode"** for steady cruising and **"Experimental Mode"** for more advanced situations to help fully automate your driving experience!
-
-**"Conditional Experimental Mode"** switches into **"Experimental Mode"** when conditions like these are met:
-- Approaching curves and turns
-- Detecting slower or stopped lead vehicles
-- Driving below a set speed
-- Predicting an upcoming stop (e.g. stoplight or stop sign)
-
-Once conditions clear it returns to **"Chill Mode"** for stability and predictability.
-
-**Note: Stay attentive as "Experimental Mode" is an alpha feature and mistakes are expected!**
-
----
-
-### 🎭 Driving Personalities
-
-With **"Driving Personalities"**, you choose how the vehicle behaves with four adjustable profiles:
-
-- **Traffic:** Catered towards stop-and-go traffic by minimizing gaps and delays  
-- **Aggressive:** Aimed to provide tighter following distances and quicker reactions  
-- **Standard:** Useful for a balanced, all-purpose driving  
-- **Relaxed:** A smoother driving experience with larger following distance gaps  
-
-Each profile can be fine-tuned to change the desired following distance, acceleration, and braking style letting you shape **FrogPilot**'s behavior to match your own driving preferences! Profiles can be switched instantly using the following distance button on the steering wheel, while **"Traffic Mode"** can be enabled by simply holding down the following distance button.
-
----
-
-### 📏 Speed Limit Controller (SLC)
-
-With **"Speed Limit Controller"**, **FrogPilot** automatically adapts to the road's posted speed using information from downloaded **["OpenStreetMap"](https://www.openstreetmap.org)** maps, online **["Mapbox"](https://www.mapbox.com)** data, and the vehicle's dashboard (if supported).
-
-Offsets let you fine-tune how closely **FrogPilot** follows posted limits across different speed ranges allowing you to cruise slightly above or below for a more natural driving experience. If no speed limit is available, you can choose whether **FrogPilot** drives at the set speed, falls back to the last known speed limit, or uses **"Experimental Mode"** to estimate one with the driving model.
-
-Maps can be downloaded directly in settings and updated automatically on a schedule ensuring your device always has the latest speed limits!
-
-**Note: Speed limits are only as accurate as the available speed limit data. Always stay attentive and adjust your speed when necessary!**
-
----
-
-### 🎨 Themes
-
-With **"Themes"**, you can personalize **FrogPilot**'s driving screen to make it uniquely yours! Choose from:
-
-- **Color Schemes**
-- **Icon Packs**
-- **Sound Packs**
-- **Turn Signal Animations**
-- **Steering Wheel Icons**
-
-Enjoy pre-existing **FrogPilot** and seasonal holiday themes, or you can create your own with the **"Theme Maker"** and even share them with the community! For extra fun, enable features like the Mario Kart–style **"Rainbow Path"** or **"Random Events"** that add playful visual effects while you drive!
-
----
-
-And lots more! From safety enhancements to personalization options, **FrogPilot** continues to evolve with features that put you in control. Check it out today for yourself!
-
----
-
-🔧 Branches
-------
-| Branch                     | Install&nbsp;URL          | Description                                            | Recommended&nbsp;For     |
-|----------------------------|---------------------------|--------------------------------------------------------|--------------------------|
-| FrogPilot                  | frogpilot.download        | The main release branch.                               | Everyone                 |
-| FrogPilot&#8209;Staging    | staging.frogpilot.download| Beta branch with upcoming features. Expect bugs!       | Early&nbsp;Adopters      |
-| FrogPilot&#8209;Testing    | testing.frogpilot.download| Alpha branch with bleeding-edge features. Breaks often!| Advanced&nbsp;Testers    |
-| FrogPilot&#8209;Development| No :)                     | Active development branch. Do not use!                 | **FrogPilot**&nbsp;Developers|
-| MAKE&#8209;PRS&#8209;HERE  | No :)                     | Workspace for pull requests. Do not use!               | Contributors             |
-
-🧰 How to Install
-------
-
-The easiest way to install **FrogPilot** is by entering this URL on the installation screen:
-
-```
-frogpilot.download
+```bash
+# Requires working docker
+./run_docker_tests.sh
 ```
 
-**DO NOT** install the **FrogPilot-Development** branch. I'm constantly breaking things on there, so unless you don't want to use **FrogPilot**, **NEVER** install it!
+The results are written to `selfdrive/test/plant/out/index.html`
 
-![](https://i.imgur.com/FsufQtO.png)
+More extensive testing infrastructure and simulation environments are coming soon.
 
-🐞 Bug Reports / Feature Requests
+Adding Car Support
 ------
 
-If you run into bugs, issues, or have ideas for new features, please post about it on the **[FrogPilot Discord](https://discord.gg/frogpilot)**! Feedback helps improve **FrogPilot** and create a better experience for everyone!
+comma.ai offers [bounties](http://comma.ai/bounties.html) for adding additional car support.
 
-To report a bug, please post it in [**#bug-reports**](https://discord.com/channels/1137853399715549214/1162100167110053888).  
-To request a feature, please post it in [**#feature-requests**](https://discord.com/channels/1137853399715549214/1160318669839147259).  
+CR-V Touring support came in through this program. Chevy Volt is close. Accord is close as well.
 
-Please include as much detail as possible! Photos, videos, log files, or anything that can help explain the issue or idea are very helpful!
-
-I'll do my best to respond promptly, but not every request can be addressed right away. Your feedback is always appreciated and helps make **FrogPilot** the best it can be!
-
-📋 Credits
+User Data / chffr Account / Crash Reporting
 ------
 
-* [Aidenir](https://github.com/Aidenir)
-* [AlexandreSato](https://github.com/AlexandreSato)
-* [cfranyota](https://github.com/cfranyota)
-* [cydia2020](https://github.com/cydia2020)
-* [dragonpilot-community](https://github.com/dragonpilot-community)
-* [ErichMoraga](https://github.com/ErichMoraga)
-* [garrettpall](https://github.com/garrettpall)
-* [jakethesnake420](https://github.com/jakethesnake420)
-* [jyoung8607](https://github.com/jyoung8607)
-* [mike8643](https://github.com/mike8643)
-* [neokii](https://github.com/neokii)
-* [OPGM](https://github.com/opgm)
-* [OPKR](https://github.com/openpilotkr)
-* [pfeiferj](https://github.com/pfeiferj)
-* [realfast](https://github.com/realfast)
-* [syncword](https://github.com/syncword)
-* [twilsonco](https://github.com/twilsonco)
+By default openpilot creates an account and includes a client for chffr, our dashcam app. We use your data to train better models and improve openpilot for everyone.
 
-Star History
+It's open source software, so you are free to disable it if you wish.
+
+It logs the road facing camera, CAN, GPS, IMU, magnetometer, thermal sensors, crashes, and operating system logs.
+It does not log the user facing camera or the microphone.
+
+By using it, you agree to [our privacy policy](https://beta.comma.ai/privacy.html). You understand that use of this software or its related services will generate certain types of user data, which may be logged and stored at the sole discretion of comma.ai. By accepting this agreement, you grant an irrevocable, perpetual, worldwide right to comma.ai for the use of this data.
+
+Contributing
 ------
 
-[![Star History Chart](https://api.star-history.com/svg?repos=FrogAi/FrogPilot&type=Date)](https://www.star-history.com/#FrogAi/FrogPilot&Date)
+We welcome both pull requests and issues on
+[github](http://github.com/commaai/openpilot). See the TODO file for a list of
+good places to start.
+
+Want to get paid to work on openpilot? [comma.ai is hiring](http://comma.ai/positions.html)
+
+Licensing
+------
+
+openpilot is released under the MIT license.
+
+Any user of this software shall indemnify and hold harmless Comma.ai, Inc. and its directors, officers, employees, agents, stockholders, affiliates, subcontractors and customers from and against all allegations, claims, actions, suits, demands, damages, liabilities, obligations, losses, settlements, judgments, costs and expenses (including without limitation attorneys’ fees and costs) which arise out of, relate to or result from any use of this software by user.
+
+**THIS IS ALPHA QUALITY SOFTWARE FOR RESEARCH PURPOSES ONLY. THIS IS NOT A PRODUCT.
+YOU ARE RESPONSIBLE FOR COMPLYING WITH LOCAL LAWS AND REGULATIONS.
+NO WARRANTY EXPRESSED OR IMPLIED.**

SAFETY.md

@@ -0,0 +1,73 @@
+openpilot Safety
+======
+
+openpilot is an Adaptive Cruise Control (ACC) and Lane Keeping Assist (LKA) system. 
+Like other ACC and LKA systems, openpilot requires the driver to be alert and to 
+pay attention at all times. We repeat, **driver alertness is necessary, but not 
+sufficient, for openpilot to be used safely**.
+
+Even with an attentive driver, we must make further efforts for the system to be
+safe. We have designed openpilot with two other safety considerations.
+
+1. The driver must always be capable to immediately retake manual control of the vehicle, 
+   by stepping on either pedal or by pressing the cancel button.
+2. The vehicle must not alter its trajectory too quickly for the driver to safely
+   react. This means that while the system is engaged, the actuators are constrained
+   to operate within reasonable limits.
+
+Following are details of the car specific safety implementations:
+
+Honda/Acura
+------
+
+  - While the system is engaged, gas, brake and steer limits are subject to the same limits used by
+    the stock system.
+
+  - Without an interceptor, the gas is controlled by the Powertrain Control Module (PCM). 
+    The PCM limits acceleration to what is reasonable for a cruise control system.  With an
+    interceptor, the gas is clipped to 60%.
+
+  - The brake is controlled by the 0x1FA CAN message. This message allows full
+    braking, although the board and the software clip it to 1/4th of the max.
+    This is around .3g of braking.
+
+  - Steering is controlled by the 0xE4 CAN message. The Electronic Power Steering (EPS) 
+    controller in the car limits the torque to a very small amount, so regardless of the 
+    message, the controller cannot jerk the wheel.
+
+  - Brake and gas pedal pressed signals are contained in the 0x17C CAN message. A rising edge of
+    either signal triggers a disengagement, which is enforced by the board and in software. The
+    green led on the board signifies if the board is allowing control messages.
+
+  - Honda CAN uses both a counter and a checksum to ensure integrity and prevent
+    replay of the same message.
+
+Toyota/Lexus
+------
+
+  - While the system is engaged, gas, brake and steer limits are subject to the same limits used by
+    the stock system.
+
+  - With the stock Driving Support Unit (DSU) enabled, the acceleration is controlled 
+    by the stock system and is subject to the stock adaptive cruise control limits. Without the
+    stock DSU connected, the acceleration command is controlled by the 0x343 CAN message and its
+    value is limited by the board and the software to between .3g of deceleration and .15g of
+    acceleration. The acceleration command is ignored by the Engine Control Module (ECM) while the
+    cruise control system is disengaged.
+
+  - Steering torque is controlled through the 0x2E4 CAN message and it's limited by the board and in
+    software to a value of -1500 and 1500. In addition, the vehicle EPS unit will not respond to
+    commands outside these limits.  A steering torque rate limit is enforced by the board and in
+    software so that the commanded steering torque must rise from 0 to max value no faster than
+    1.5s. Commanded steering torque is limited by the board and in software to be no more than 350
+    units above the actual EPS generated motor torque to ensure limited differences between
+    commanded and actual torques.
+
+  - Brake and gas pedal pressed signals are contained in the 0x224 and 0x1D2 CAN messages,
+    respectively. A rising edge of either signal triggers a disengagement, which is enforced by the
+    board and in software. Additionally, the cruise control system disengages on the rising edge of
+    the brake pedal pressed signal.
+
+  - The cruise control system state is contained in the 0x1D2 message. No control messages are
+    allowed if the cruise control system is not active. This is enforced by the software and the
+    board. The green led on the board signifies if the board is allowing control messages.

SConstruct

@@ -1,502 +0,0 @@
-import os
-import shutil
-import subprocess
-import sys
-import sysconfig
-import platform
-import numpy as np
-
-import SCons.Errors
-
-SCons.Warnings.warningAsException(True)
-
-# pending upstream fix - https://github.com/SCons/scons/issues/4461
-#SetOption('warn', 'all')
-
-force_tici = os.environ.get("SP_FORCE_TICI", "").lower() in {"1", "true", "yes", "on"}
-TICI = os.path.isfile('/TICI') or force_tici
-AGNOS = TICI
-
-Decider('MD5-timestamp')
-
-SetOption('num_jobs', max(1, int(os.cpu_count()/2)))
-
-AddOption('--kaitai',
-          action='store_true',
-          help='Regenerate kaitai struct parsers')
-
-AddOption('--asan',
-          action='store_true',
-          help='turn on ASAN')
-
-AddOption('--ubsan',
-          action='store_true',
-          help='turn on UBSan')
-
-AddOption('--coverage',
-          action='store_true',
-          help='build with test coverage options')
-
-AddOption('--clazy',
-          action='store_true',
-          help='build with clazy')
-
-AddOption('--ccflags',
-          action='store',
-          type='string',
-          default='',
-          help='pass arbitrary flags over the command line')
-
-AddOption('--external-sconscript',
-          action='store',
-          metavar='FILE',
-          dest='external_sconscript',
-          help='add an external SConscript to the build')
-
-AddOption('--mutation',
-          action='store_true',
-          help='generate mutation-ready code')
-
-AddOption('--minimal',
-          action='store_false',
-          dest='extras',
-          default=os.path.exists(File('#.lfsconfig').abspath), # minimal by default on release branch (where there's no LFS)
-          help='the minimum build to run openpilot. no tests, tools, etc.')
-
-def maybe_delegate_to_laptop_device_builder() -> None:
-  if platform.system() != "Darwin":
-    return
-  if os.environ.get("SP_FORCE_ARCH"):
-    return
-  if os.environ.get("SP_SKIP_CONTAINER_REEXEC"):
-    return
-  if os.environ.get("SP_DISABLE_AUTO_DEVICE_SCONS", "").lower() in {"1", "true", "yes", "on"}:
-    return
-
-  basedir = Dir("#").abspath
-  sysroot_dir = os.environ.get("COMMA_SYSROOT_DIR", os.path.join(basedir, ".comma_sysroot"))
-  required_sysroot_dirs = (
-    "usr/local/lib",
-    "lib/aarch64-linux-gnu",
-    "usr/lib/aarch64-linux-gnu",
-    "system/vendor/lib64",
-  )
-  if not all(os.path.isdir(os.path.join(sysroot_dir, p)) for p in required_sysroot_dirs):
-    return
-
-  docker_bin = shutil.which("docker")
-  if docker_bin is None:
-    mac_docker = "/Applications/Docker.app/Contents/Resources/bin/docker"
-    if os.path.isfile(mac_docker):
-      docker_bin = mac_docker
-
-  if docker_bin is None and shutil.which("podman") is None:
-    return
-
-  builder = os.path.join(basedir, "scripts", "laptop_device_build.sh")
-  if not os.path.isfile(builder):
-    return
-
-  print(f"Auto-routing scons to laptop device build (sysroot: {sysroot_dir})", flush=True)
-  env = os.environ.copy()
-  env["SP_SKIP_CONTAINER_REEXEC"] = "1"
-  env.setdefault("COMMA_SYSROOT_DIR", sysroot_dir)
-  if docker_bin is not None and shutil.which("docker") is None:
-    docker_dir = os.path.dirname(docker_bin)
-    env["PATH"] = f"{docker_dir}:{env.get('PATH', '')}"
-
-  cmd = [builder, "build", *sys.argv[1:]]
-  raise SystemExit(subprocess.call(cmd, cwd=basedir, env=env))
-
-maybe_delegate_to_laptop_device_builder()
-
-## Architecture name breakdown (arch)
-## - larch64: linux tici aarch64
-## - aarch64: linux pc aarch64
-## - x86_64:  linux pc x64
-## - Darwin:  mac x64 or arm64
-real_arch = arch = subprocess.check_output(["uname", "-m"], encoding='utf8').rstrip()
-forced_arch = os.environ.get("SP_FORCE_ARCH")
-if forced_arch:
-  arch = forced_arch
-elif platform.system() == "Darwin":
-  arch = "Darwin"
-  brew_prefix = subprocess.check_output(['brew', '--prefix'], encoding='utf8').strip()
-elif arch == "aarch64" and AGNOS:
-  arch = "larch64"
-assert arch in ["larch64", "aarch64", "x86_64", "Darwin"]
-
-# Homebrew llvm can shadow Apple clang and break macOS SDK header resolution.
-# Use the system toolchain explicitly on macOS for reliable local builds.
-cc = '/usr/bin/clang' if arch == "Darwin" else 'clang'
-cxx = '/usr/bin/clang++' if arch == "Darwin" else 'clang++'
-
-lenv = {
-  "PATH": os.environ['PATH'],
-  "PYTHONPATH": ":".join([
-    Dir("#").abspath,
-    Dir("#third_party/acados").abspath,
-    Dir("#opendbc_repo").abspath,
-  ]),
-
-  "ACADOS_SOURCE_DIR": Dir("#third_party/acados").abspath,
-  "ACADOS_PYTHON_INTERFACE_PATH": Dir("#third_party/acados/acados_template").abspath,
-  "TERA_PATH": Dir("#").abspath + f"/third_party/acados/{arch}/t_renderer"
-}
-
-# Allow callers to override cache/temp dirs used by subprocesses (e.g. tinygrad model compilation).
-for key in ("HOME", "TMPDIR", "XDG_CACHE_HOME", "CACHEDB"):
-  if key in os.environ:
-    lenv[key] = os.environ[key]
-
-rpath = []
-arch_ldflags = []
-
-def tici_libpath(path: str) -> str:
-  tici_sysroot = os.environ.get("SP_TICI_SYSROOT", "").strip().rstrip("/")
-  if arch != "larch64" or not tici_sysroot or not path.startswith("/"):
-    return path
-  return os.path.join(tici_sysroot, path.lstrip("/"))
-
-if arch == "larch64":
-  cpppath = [
-    "#third_party/opencl/include",
-    tici_libpath("/usr/local/include"),
-    tici_libpath("/usr/include"),
-    tici_libpath("/usr/include/aarch64-linux-gnu"),
-  ]
-
-  libpath = [
-    tici_libpath("/usr/local/lib"),
-    tici_libpath("/system/vendor/lib64"),
-    f"#third_party/acados/{arch}/lib",
-  ]
-
-  libpath += [
-    "#third_party/libyuv/larch64/lib",
-    tici_libpath("/lib/aarch64-linux-gnu"),
-    tici_libpath("/usr/lib/aarch64-linux-gnu")
-  ]
-  cflags = ["-D__TICI__", "-DQCOM2", "-mcpu=cortex-a57"]
-  cxxflags = ["-D__TICI__", "-DQCOM2", "-mcpu=cortex-a57"]
-  arch_ldflags += [
-    f"-Wl,-rpath-link,{tici_libpath('/usr/local/lib')}",
-    f"-Wl,-rpath-link,{tici_libpath('/lib/aarch64-linux-gnu')}",
-    f"-Wl,-rpath-link,{tici_libpath('/usr/lib/aarch64-linux-gnu')}",
-    f"-Wl,-rpath-link,{tici_libpath('/system/vendor/lib64')}",
-    f"-Wl,-rpath-link,{tici_libpath('/vendor/lib64')}",
-  ]
-  # On non-aarch64 hosts (e.g. Docker on macOS), force clang cross-targeting.
-  if platform.machine() not in ("aarch64", "arm64"):
-    cross_target = os.environ.get("SP_CROSS_TARGET", "aarch64-linux-gnu")
-    cflags += [f"--target={cross_target}"]
-    cxxflags += [f"--target={cross_target}"]
-    arch_ldflags += [f"--target={cross_target}"]
-  rpath += ["/usr/local/lib"]
-else:
-  cflags = []
-  cxxflags = []
-  cpppath = []
-  rpath += []
-
-  # MacOS
-  if arch == "Darwin":
-    libpath = [
-      f"#third_party/libyuv/{arch}/lib",
-      f"#third_party/acados/{arch}/lib",
-      f"{brew_prefix}/lib",
-      f"{brew_prefix}/opt/openssl@3.0/lib",
-      "/System/Library/Frameworks/OpenGL.framework/Libraries",
-    ]
-
-    # cereal headers in this tree were generated with capnp 1.0.1, while
-    # Homebrew currently ships newer capnp headers (1.3.x). For mac host
-    # tooling builds (desktop UI/runtime .so), force the expected version
-    # macro so generated headers remain buildable.
-    cflags += ["-DGL_SILENCE_DEPRECATION", "-DCAPNP_VERSION=1000001"]
-    cxxflags += ["-DGL_SILENCE_DEPRECATION", "-DCAPNP_VERSION=1000001"]
-    cpppath += [
-      f"{brew_prefix}/include",
-      f"{brew_prefix}/opt/openssl@3.0/include",
-    ]
-  # Linux
-  else:
-    libpath = [
-      f"#third_party/acados/{arch}/lib",
-      f"#third_party/libyuv/{arch}/lib",
-      "/usr/lib",
-      "/usr/local/lib",
-    ]
-
-if GetOption('asan'):
-  ccflags = ["-fsanitize=address", "-fno-omit-frame-pointer"]
-  ldflags = ["-fsanitize=address"]
-elif GetOption('ubsan'):
-  ccflags = ["-fsanitize=undefined"]
-  ldflags = ["-fsanitize=undefined"]
-else:
-  ccflags = []
-  ldflags = []
-ldflags += arch_ldflags
-
-# AGNOS devices are memory-constrained during on-device C++ compiles.
-# Building without debug symbols dramatically reduces peak clang memory and
-# prevents lowmemorykiller SIGKILLs (Error -9) on large translation units.
-use_debug_symbols = os.environ.get("SP_FORCE_DEBUG_SYMBOLS", "").lower() in {"1", "true", "yes", "on"}
-debug_flag = "-g" if (not AGNOS or use_debug_symbols) else "-g0"
-
-# no --as-needed on mac linker
-if arch != "Darwin":
-  ldflags += ["-Wl,--as-needed", "-Wl,--no-undefined"]
-
-ccflags_option = GetOption('ccflags')
-if ccflags_option:
-  ccflags += ccflags_option.split(' ')
-
-env = Environment(
-  ENV=lenv,
-  CCFLAGS=[
-    debug_flag,
-    "-fPIC",
-    "-O2",
-    "-Wunused",
-    "-Werror",
-    "-Wshadow",
-    "-Wno-unknown-warning-option",
-    "-Wno-inconsistent-missing-override",
-    "-Wno-c99-designator",
-    "-Wno-reorder-init-list",
-    "-Wno-vla-cxx-extension",
-  ] + cflags + ccflags,
-
-  CPPPATH=cpppath + [
-    "#",
-    "#third_party/acados/include",
-    "#third_party/acados/include/blasfeo/include",
-    "#third_party/acados/include/hpipm/include",
-    "#third_party/catch2/include",
-    "#third_party/libyuv/include",
-    "#third_party/json11",
-    "#third_party/linux/include",
-    "#third_party",
-    "#msgq",
-  ],
-
-  CC=cc,
-  CXX=cxx,
-  LINKFLAGS=ldflags,
-
-  RPATH=rpath,
-
-  CFLAGS=["-std=gnu11"] + cflags,
-  CXXFLAGS=["-std=c++1z"] + cxxflags,
-  LIBPATH=libpath + [
-    "#msgq_repo",
-    "#third_party",
-    "#selfdrive/pandad",
-    "#common",
-    "#rednose/helpers",
-  ],
-  CYTHONCFILESUFFIX=".cpp",
-  COMPILATIONDB_USE_ABSPATH=True,
-  REDNOSE_ROOT="#",
-  tools=["default", "cython", "compilation_db", "rednose_filter"],
-  toolpath=["#site_scons/site_tools", "#rednose_repo/site_scons/site_tools"],
-)
-
-if arch == "Darwin":
-  # RPATH is not supported on macOS, instead use the linker flags
-  darwin_rpath_link_flags = [f"-Wl,-rpath,{path}" for path in env["RPATH"]]
-  env["LINKFLAGS"] += darwin_rpath_link_flags
-
-env.CompilationDatabase('compile_commands.json')
-
-# Setup cache dir
-cache_dir = '/data/scons_cache' if AGNOS else '/tmp/scons_cache'
-CacheDir(cache_dir)
-Clean(["."], cache_dir)
-
-node_interval = 5
-node_count = 0
-def progress_function(node):
-  global node_count
-  node_count += node_interval
-  sys.stderr.write("progress: %d\n" % node_count)
-
-if os.environ.get('SCONS_PROGRESS'):
-  Progress(progress_function, interval=node_interval)
-
-# Cython build environment
-py_include = sysconfig.get_paths()['include']
-if arch == "larch64" and platform.machine() not in ("aarch64", "arm64"):
-  tici_py_include = tici_libpath(f"/usr/include/python{sys.version_info.major}.{sys.version_info.minor}")
-  if os.path.isdir(tici_py_include):
-    py_include = tici_py_include
-envCython = env.Clone()
-envCython["CPPPATH"] += [py_include, np.get_include()]
-envCython["CCFLAGS"] += ["-Wno-#warnings", "-Wno-shadow", "-Wno-deprecated-declarations"]
-envCython["CCFLAGS"].remove("-Werror")
-
-envCython["LIBS"] = []
-if arch == "Darwin":
-  envCython["LINKFLAGS"] = ["-bundle", "-undefined", "dynamic_lookup"] + darwin_rpath_link_flags
-else:
-  envCython["LINKFLAGS"] = arch_ldflags + ["-pthread", "-shared"]
-
-np_version = SCons.Script.Value(np.__version__)
-Export('envCython', 'np_version')
-
-# Qt build environment
-qt_env = env.Clone()
-qt_modules = ["Widgets", "Gui", "Core", "Network", "Concurrent", "DBus", "Xml"]
-
-qt_libs = []
-if arch == "Darwin":
-  qt_env['QTDIR'] = f"{brew_prefix}/opt/qt@5"
-  qt_dirs = [
-    os.path.join(qt_env['QTDIR'], "include"),
-  ]
-  qt_dirs += [f"{qt_env['QTDIR']}/include/Qt{m}" for m in qt_modules]
-  qt_env["LINKFLAGS"] += ["-F" + os.path.join(qt_env['QTDIR'], "lib")]
-  qt_env["FRAMEWORKS"] += [f"Qt{m}" for m in qt_modules] + ["OpenGL"]
-  qt_env.AppendENVPath('PATH', os.path.join(qt_env['QTDIR'], "bin"))
-else:
-  if arch == "larch64":
-    qt_env.PrependENVPath('PATH', Dir("#third_party/qt5/larch64/bin/").abspath)
-  # For laptop/device builds that mount an AGNOS sysroot, always prefer Qt
-  # headers from that sysroot to keep headers/libs ABI-matched (Qt 5.12.x).
-  if arch == "larch64" and os.environ.get("SP_TICI_SYSROOT"):
-    qt_install_prefix = tici_libpath("/usr")
-    qt_install_headers = tici_libpath("/usr/include/aarch64-linux-gnu/qt5")
-  else:
-    qmake = os.environ.get("SP_QMAKE", "qmake")
-    qt_install_prefix = subprocess.check_output([qmake, '-query', 'QT_INSTALL_PREFIX'], encoding='utf8').strip()
-    qt_install_headers = subprocess.check_output([qmake, '-query', 'QT_INSTALL_HEADERS'], encoding='utf8').strip()
-
-  qt_env['QTDIR'] = qt_install_prefix
-  qt_dirs = [
-    f"{qt_install_headers}",
-  ]
-
-  qt_gui_path = os.path.join(qt_install_headers, "QtGui")
-  qt_gui_dirs = [d for d in os.listdir(qt_gui_path) if os.path.isdir(os.path.join(qt_gui_path, d))]
-  qt_dirs += [f"{qt_install_headers}/QtGui/{qt_gui_dirs[0]}/QtGui", ] if qt_gui_dirs else []
-  qt_dirs += [f"{qt_install_headers}/Qt{m}" for m in qt_modules]
-
-  qt_libs = [f"Qt5{m}" for m in qt_modules]
-  if arch == "larch64":
-    qt_libs += ["GLESv2", "wayland-client"]
-  elif arch != "Darwin":
-    qt_libs += ["GL"]
-qt_env['QT3DIR'] = qt_env['QTDIR']
-qt_env.Tool('qt3')
-if arch == "larch64" and os.environ.get("SP_TICI_SYSROOT"):
-  qt_tool_bin = tici_libpath("/usr/lib/qt5/bin")
-  qt_tool_root = tici_libpath("/")
-  qt_arm_moc = os.path.join(qt_tool_bin, "moc")
-  qt_arm_uic = os.path.join(qt_tool_bin, "uic")
-  qt_arm_rcc = os.path.join(qt_tool_bin, "rcc")
-  if platform.machine() in ("aarch64", "arm64"):
-    if os.path.isfile(qt_arm_moc):
-      qt_env['QT3_MOC'] = qt_arm_moc
-    if os.path.isfile(qt_arm_uic):
-      qt_env['QT3_UIC'] = qt_arm_uic
-    if os.path.isfile(qt_arm_rcc):
-      qt_env['SP_QT_RCC'] = qt_arm_rcc
-  else:
-    qt_qemu = shutil.which("qemu-aarch64-static") or shutil.which("qemu-aarch64")
-
-    if qt_qemu and os.path.isfile(qt_arm_moc):
-      qt_env['QT3_MOC'] = f"{qt_qemu} -L {qt_tool_root} {qt_arm_moc}"
-    else:
-      qt_host_bin = os.environ.get("SP_QT_HOST_BIN", "/usr/lib/qt5/bin")
-      qt_env['QT3_MOC'] = os.environ.get("SP_QT_HOST_MOC", os.path.join(qt_host_bin, "moc"))
-
-    if qt_qemu and os.path.isfile(qt_arm_uic):
-      qt_env['QT3_UIC'] = f"{qt_qemu} -L {qt_tool_root} {qt_arm_uic}"
-    else:
-      qt_host_bin = os.environ.get("SP_QT_HOST_BIN", "/usr/lib/qt5/bin")
-      qt_env['QT3_UIC'] = os.environ.get("SP_QT_HOST_UIC", os.path.join(qt_host_bin, "uic"))
-
-    if qt_qemu and os.path.isfile(qt_arm_rcc):
-      qt_env['SP_QT_RCC'] = f"{qt_qemu} -L {qt_tool_root} {qt_arm_rcc}"
-    else:
-      qt_env['SP_QT_RCC'] = os.environ.get("SP_QT_HOST_RCC", "rcc")
-
-qt_env['CPPPATH'] += qt_dirs + ["#third_party/qrcode"]
-qt_flags = [
-  "-D_REENTRANT",
-  "-DQT_NO_DEBUG",
-  "-DQT_WIDGETS_LIB",
-  "-DQT_GUI_LIB",
-  "-DQT_CORE_LIB",
-  "-DQT_MESSAGELOGCONTEXT",
-]
-qt_env['CXXFLAGS'] += qt_flags
-qt_env['LIBPATH'] += ['#selfdrive/ui', ]
-qt_env['LIBS'] = qt_libs
-
-if GetOption("clazy"):
-  checks = [
-    "level0",
-    "level1",
-    "no-range-loop",
-    "no-non-pod-global-static",
-  ]
-  qt_env['CXX'] = 'clazy'
-  qt_env['ENV']['CLAZY_IGNORE_DIRS'] = qt_dirs[0]
-  qt_env['ENV']['CLAZY_CHECKS'] = ','.join(checks)
-
-Export('env', 'qt_env', 'arch', 'real_arch')
-
-# Build common module
-SConscript(['common/SConscript'])
-Import('_common', '_gpucommon')
-
-common = [_common, 'json11', 'zmq']
-gpucommon = [_gpucommon]
-
-Export('common', 'gpucommon')
-
-# Build messaging (cereal + msgq + socketmaster + their dependencies)
-# Enable swaglog include in submodules
-env_swaglog = env.Clone()
-env_swaglog['CXXFLAGS'].append('-DSWAGLOG="\\"common/swaglog.h\\""')
-SConscript(['msgq_repo/SConscript'], exports={'env': env_swaglog})
-SConscript(['opendbc_repo/SConscript'], exports={'env': env_swaglog})
-
-SConscript(['cereal/SConscript'])
-
-Import('socketmaster', 'msgq')
-messaging = [socketmaster, msgq, 'capnp', 'kj',]
-Export('messaging')
-
-
-# Build other submodules
-SConscript(['panda/SConscript'])
-
-# Build rednose library
-SConscript(['rednose/SConscript'])
-
-# Build system services
-SConscript([
-  'system/ubloxd/SConscript',
-  'system/loggerd/SConscript',
-])
-
-if arch == "larch64":
-  SConscript(['system/camerad/SConscript'])
-
-# Build openpilot
-SConscript(['third_party/SConscript'])
-
-SConscript(['selfdrive/SConscript'])
-
-if Dir('#tools/cabana/').exists() and GetOption('extras'):
-  SConscript(['tools/replay/SConscript'])
-  if arch != "larch64":
-    SConscript(['tools/cabana/SConscript'])
-
-external_sconscript = GetOption('external_sconscript')
-if external_sconscript:
-  SConscript([external_sconscript])

SECURITY.md

@@ -1,5 +0,0 @@
-# Security Policy
-
-## Reporting a Vulnerability
-
-Suspected vulnerabilities can be reported to both `adeeb@comma.ai` and `security@comma.ai`.

apk/external/.gitignore

@@ -0,0 +1,2 @@
+src/*
+out/*

apk/external/patcher.py

@@ -0,0 +1,122 @@
+#!/usr/bin/env python2.7
+
+import os
+import sys
+import glob
+import shutil
+import urllib2
+import hashlib
+import subprocess
+
+
+EXTERNAL_PATH = os.path.dirname(os.path.abspath(__file__))
+
+if os.path.exists("/init.qcom.rc"):
+  # android
+  APKPATCH = os.path.join(EXTERNAL_PATH, 'tools/apkpatch_android')
+  SIGNAPK = os.path.join(EXTERNAL_PATH, 'tools/signapk_android')
+else:
+  APKPATCH = os.path.join(EXTERNAL_PATH, 'tools/apkpatch')
+  SIGNAPK = os.path.join(EXTERNAL_PATH, 'tools/signapk')
+
+APKS = {
+  'com.waze': {
+    'src': 'https://apkcache.s3.amazonaws.com/com.waze_1021278.apk',
+    'src_sha256': 'f00957e93e2389f9e30502ac54994b98ac769314b0963c263d4e8baa625ab0c2',
+    'patch': 'com.waze.apkpatch',
+    'out_sha256': '9ec8b0ea3c78c666342865b1bfb66e368a3f5c911df2ad12835206ec8b19f444'
+  },
+  'com.spotify.music': {
+    'src': 'https://apkcache.s3.amazonaws.com/com.spotify.music_24382006.apk',
+    'src_sha256': '0610fea68ee7ba5f8e4e0732ad429d729dd6cbb8bc21222c4c99db6cb09fbff4',
+    'patch': 'com.spotify.music.apkpatch',
+    'out_sha256': '5a3d6f478c7e40403a98ccc8906d7e0ae12b06543b41f5df52149dd09c647c11'
+  },
+}
+
+def sha256_path(path):
+  with open(path, 'rb') as f:
+    return hashlib.sha256(f.read()).hexdigest()
+
+def remove(path):
+  try:
+    os.remove(path)
+  except OSError:
+    pass
+
+def process(download, patch):
+  # clean up any junk apks
+  for out_apk in glob.glob(os.path.join(EXTERNAL_PATH, 'out/*.apk')):
+    app = os.path.basename(out_apk)[:-4]
+    if app not in APKS:
+      print "remove junk", out_apk
+      remove(out_apk)
+
+  complete = True
+  for k,v in APKS.iteritems():
+    apk_path = os.path.join(EXTERNAL_PATH, 'out', k+'.apk')
+    print "checking", apk_path
+    if os.path.exists(apk_path) and sha256_path(apk_path) == v['out_sha256']:
+      # nothing to do
+      continue
+
+    complete = False
+
+    remove(apk_path)
+
+    src_path = os.path.join(EXTERNAL_PATH, 'src', v['src_sha256'])
+    if not os.path.exists(src_path) or sha256_path(src_path) != v['src_sha256']:
+      if not download:
+        continue
+
+      print "downloading", v['src'], "to", src_path
+      # download it
+      resp = urllib2.urlopen(v['src'])
+      data = resp.read()
+      with open(src_path, 'wb') as src_f:
+        src_f.write(data)
+
+      if sha256_path(src_path) != v['src_sha256']:
+        print "download was corrupted..."
+        continue
+
+    if not patch:
+      continue
+
+    # ignoring lots of TOCTTOU here...
+
+    apk_temp = "/tmp/"+k+".patched"
+    remove(apk_temp)
+    apk_temp2 = "/tmp/"+k+".signed"
+    remove(apk_temp2)
+
+    try:
+      print "patching", v['patch']
+      subprocess.check_call([APKPATCH, 'apply', src_path, apk_temp, os.path.join(EXTERNAL_PATH, v['patch'])])
+      print "signing", apk_temp
+      subprocess.check_call([SIGNAPK,
+        os.path.join(EXTERNAL_PATH, 'tools/certificate.pem'), os.path.join(EXTERNAL_PATH, 'tools/key.pk8'),
+        apk_temp, apk_temp2])
+
+      out_sha256 = sha256_path(apk_temp2) if os.path.exists(apk_temp2) else None
+
+      if out_sha256 == v['out_sha256']:
+        print "done", apk_path
+        shutil.move(apk_temp2, apk_path)
+      else:
+        print "patch was corrupted", apk_temp2, out_sha256
+    finally:
+      remove(apk_temp)
+      remove(apk_temp2)
+
+  return complete
+
+if __name__ == "__main__":
+  ret = True
+  if len(sys.argv) == 2 and sys.argv[1] == "download":
+    ret = process(True, False)
+  elif len(sys.argv) == 2 and sys.argv[1] == "patch":
+    ret = process(False, True)
+  else:
+    ret = process(True, True)
+  sys.exit(0 if ret else 1)

apk/external/tools/apkpatch_android

@@ -0,0 +1,7 @@
+#!/system/bin/sh
+
+DIR="$(cd "$(dirname "$0")" && pwd)"
+
+export LD_LIBRARY_PATH=/system/lib64
+export CLASSPATH="$DIR"/ApkPatch.android.jar
+exec app_process "$DIR" ApkPatch "$@"

apk/external/tools/certificate.pem

@@ -0,0 +1,17 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

apk/external/tools/signapk_android

@@ -0,0 +1,7 @@
+#!/system/bin/sh
+
+DIR="$(cd "$(dirname "$0")" && pwd)"
+
+export LD_LIBRARY_PATH=/system/lib64
+export CLASSPATH="$DIR"/signapk.android.jar
+exec app_process "$DIR" com.android.signapk.SignApk "$@"

build

@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-
-set -euo pipefail
-
-ROOT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-exec "${ROOT_DIR}/scripts/laptop_device_build.sh" build "$@"

c3

@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-
-set -euo pipefail
-
-ROOT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-exec "${ROOT_DIR}/scripts/launch_ui_desktop.sh" "$@"

c4

@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-
-set -euo pipefail
-
-ROOT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-exec "${ROOT_DIR}/scripts/launch_ui_c4_desktop.sh" "$@"

cereal/.gitignore

@@ -0,0 +1 @@
+gen

cereal/Makefile

@@ -0,0 +1,52 @@
+PWD := $(shell pwd)
+
+SRCS := log.capnp car.capnp
+
+GENS := gen/cpp/car.capnp.c++ gen/cpp/log.capnp.c++
+
+UNAME_M ?= $(shell uname -m)
+
+# only generate C++ for docker tests
+ifneq ($(OPTEST),1)
+	GENS += gen/c/car.capnp.c gen/c/log.capnp.c gen/c/c++.capnp.h gen/c/java.capnp.h
+
+# Dont build java on the phone...
+ifeq ($(UNAME_M),x86_64)
+	GENS += gen/java/Car.java gen/java/Log.java
+endif
+
+endif
+
+ifeq ($(UNAME_M),aarch64)
+CAPNPC=PATH=$(PWD)/../phonelibs/capnp-cpp/aarch64/bin/:$$PATH capnpc
+else
+CAPNPC=capnpc
+endif
+
+.PHONY: all
+all: $(GENS)
+
+.PHONY: clean
+clean:
+	rm -rf gen
+
+gen/c/%.capnp.c: %.capnp
+	@echo "[ CAPNPC C ] $@"
+	mkdir -p gen/c/
+	$(CAPNPC) '$<' -o c:gen/c/
+
+gen/cpp/%.capnp.c++: %.capnp
+	@echo "[ CAPNPC C++ ] $@"
+	mkdir -p gen/cpp/
+	$(CAPNPC) '$<' -o c++:gen/cpp/
+
+gen/java/Car.java gen/java/Log.java: $(SRCS)
+	@echo "[ CAPNPC java ] $@"
+	mkdir -p gen/java/
+	$(CAPNPC) $^ -o java:gen/java
+
+# c-capnproto needs some empty headers
+gen/c/c++.capnp.h gen/c/java.capnp.h:
+	mkdir -p gen/c/
+	touch '$@'
+

cereal/README.md

@@ -1,95 +0,0 @@
-# What is cereal?
-
-cereal is the messaging system for openpilot. It uses [msgq](https://github.com/commaai/msgq) as a pub/sub backend, and [Cap'n proto](https://capnproto.org/capnp-tool.html) for serialization of the structs.
-
-
-## Messaging Spec
-
-You'll find the message types in [log.capnp](log.capnp). It uses [Cap'n proto](https://capnproto.org/capnp-tool.html) and defines one struct called `Event`.
-
-All `Events` have a `logMonoTime` and a `valid`. Then a big union defines the packet type.
-
-### Best Practices
-
-- **All fields must describe quantities in SI units**, unless otherwise specified in the field name.
-- In the context of the message they are in, field names should be completely unambiguous.
-- All values should be easy to plot and be human-readable with minimal parsing.
-
-### Maintaining backwards-compatibility
-
-When making changes to the messaging spec you want to maintain backwards-compatibility, such that old logs can
-be parsed with a new version of cereal. Adding structs and adding members to structs is generally safe, most other
-things are not. Read more details [here](https://capnproto.org/language.html).
-
-### Custom forks
-
-Forks of [openpilot](https://github.com/commaai/openpilot) might want to add things to the messaging
-spec, however this could conflict with future changes made in mainline cereal/openpilot. Rebasing against mainline openpilot
-then means breaking backwards-compatibility with all old logs of your fork. So we added reserved events in
-[custom.capnp](custom.capnp) that we will leave empty in mainline cereal/openpilot. **If you only modify those, you can ensure your
-fork will remain backwards-compatible with all versions of mainline openpilot and your fork.**
-
-An example of compatible changes:
-```diff
-diff --git a/cereal/custom.capnp b/cereal/custom.capnp
-index 3348e859e..3365c7b98 100644
---- a/cereal/custom.capnp
-+++ b/cereal/custom.capnp
-@@ -10,7 +10,11 @@ $Cxx.namespace("cereal");
- # DO rename the structs
- # DON'T change the identifier (e.g. @0x81c2f05a394cf4af)
-
--struct CustomReserved0 @0x81c2f05a394cf4af {
-+struct SteeringInfo @0x81c2f05a394cf4af {
-+  active @0 :Bool;
-+  steeringAngleDeg @1 :Float32;
-+  steeringRateDeg @2 :Float32;
-+  steeringAccelDeg @3 :Float32;
- }
-
- struct CustomReserved1 @0xaedffd8f31e7b55d {
-diff --git a/cereal/log.capnp b/cereal/log.capnp
-index 1209f3fd9..b189f58b6 100644
---- a/cereal/log.capnp
-+++ b/cereal/log.capnp
-@@ -2558,14 +2558,14 @@ struct Event {
-
-     # DO change the name of the field
-     # DON'T change anything after the "@"
--    customReservedRawData0 @124 :Data;
-+    rawCanData @124 :Data;
-     customReservedRawData1 @125 :Data;
-     customReservedRawData2 @126 :Data;
-
-     # DO change the name of the field and struct
-     # DON'T change the ID (e.g. @107)
-     # DON'T change which struct it points to
--    customReserved0 @107 :Custom.CustomReserved0;
-+    steeringInfo @107 :Custom.SteeringInfo;
-     customReserved1 @108 :Custom.CustomReserved1;
-     customReserved2 @109 :Custom.CustomReserved2;
-     customReserved3 @110 :Custom.CustomReserved3;
-```
-
----
-
-Example
----
-```python
-import cereal.messaging as messaging
-
-# in subscriber
-sm = messaging.SubMaster(['sensorEvents'])
-while 1:
-  sm.update()
-  print(sm['sensorEvents'])
-
-```
-
-```python
-# in publisher
-pm = messaging.PubMaster(['sensorEvents'])
-dat = messaging.new_message('sensorEvents', size=1)
-dat.sensorEvents[0] = {"gyro": {"v": [0.1, -0.1, 0.1]}}
-pm.send('sensorEvents', dat)
-```

cereal/SConscript

@@ -1,20 +0,0 @@
-Import('env', 'common', 'msgq')
-
-cereal_dir = Dir('.')
-gen_dir = Dir('gen')
-
-# Build cereal
-schema_files = ['log.capnp', 'car.capnp', 'legacy.capnp', 'custom.capnp']
-env.Command([f'gen/cpp/{s}.c++' for s in schema_files] + [f'gen/cpp/{s}.h' for s in schema_files],
-            schema_files,
-            f"capnpc --src-prefix={cereal_dir.path} $SOURCES -o c++:{gen_dir.path}/cpp/")
-
-cereal = env.Library('cereal', [f'gen/cpp/{s}.c++' for s in schema_files])
-
-# Build messaging
-services_h = env.Command(['services.h'], ['services.py'], 'python3 ' + cereal_dir.path + '/services.py > $TARGET')
-env.Program('messaging/bridge', ['messaging/bridge.cc', 'messaging/msgq_to_zmq.cc'], LIBS=[msgq, common, 'pthread'])
-
-socketmaster = env.Library('socketmaster', ['messaging/socketmaster.cc'])
-
-Export('cereal', 'socketmaster')

cereal/__init__.py

@@ -1,11 +1,20 @@
 import os
 import capnp
-from importlib.resources import as_file, files
 
+CEREAL_PATH = os.path.dirname(os.path.abspath(__file__))
 capnp.remove_import_hook()
 
-with as_file(files("cereal")) as fspath:
-  CEREAL_PATH = fspath.as_posix()
+if os.getenv("NEWCAPNP"):
+  import tempfile
+  import pyximport
+
+  importers = pyximport.install(build_dir=os.path.join(tempfile.gettempdir(), ".pyxbld"))
+  try:
+    import cereal.gen.cython.log_capnp_cython as log
+    import cereal.gen.cython.car_capnp_cython as car
+  finally:
+    pyximport.uninstall(*importers)
+    del importers
+else:
   log = capnp.load(os.path.join(CEREAL_PATH, "log.capnp"))
   car = capnp.load(os.path.join(CEREAL_PATH, "car.capnp"))
-  custom = capnp.load(os.path.join(CEREAL_PATH, "custom.capnp"))

cereal/car.capnp

@@ -1 +0,0 @@
-../opendbc_repo/opendbc/car/car.capnp

cereal/car.capnp

@@ -0,0 +1,321 @@
+using Cxx = import "c++.capnp";
+$Cxx.namespace("cereal");
+
+using Java = import "java.capnp";
+$Java.package("ai.comma.openpilot.cereal");
+$Java.outerClassname("Car");
+
+@0x8e2af1e708af8b8d;
+
+# ******* events causing controls state machine transition *******
+
+struct CarEvent @0x9b1657f34caf3ad3 {
+  name @0 :EventName;
+  enable @1 :Bool;
+  noEntry @2 :Bool;
+  warning @3 :Bool;
+  userDisable @4 :Bool;
+  softDisable @5 :Bool;
+  immediateDisable @6 :Bool;
+  preEnable @7 :Bool;
+  permanent @8 :Bool;
+
+  enum EventName @0xbaa8c5d505f727de {
+    # TODO: copy from error list
+    commIssue @0;
+    steerUnavailable @1;
+    brakeUnavailable @2;
+    gasUnavailable @3;
+    wrongGear @4;
+    doorOpen @5;
+    seatbeltNotLatched @6;
+    espDisabled @7;
+    wrongCarMode @8;
+    steerTempUnavailable @9;
+    reverseGear @10;
+    buttonCancel @11;
+    buttonEnable @12;
+    pedalPressed @13;
+    cruiseDisabled @14;
+    radarCommIssue @15;
+    dataNeeded @16;
+    speedTooLow @17;
+    outOfSpace @18;
+    overheat @19;
+    calibrationInProgress @20;
+    calibrationInvalid @21;
+    controlsMismatch @22;
+    pcmEnable @23;
+    pcmDisable @24;
+    noTarget @25;
+    radarFault @26;
+    modelCommIssue @27;
+    brakeHold @28;
+    parkBrake @29;
+    manualRestart @30;
+    lowSpeedLockout @31;
+  }
+}
+
+# ******* main car state @ 100hz *******
+# all speeds in m/s
+
+struct CarState {
+  errorsDEPRECATED @0 :List(CarEvent.EventName);
+  events @13 :List(CarEvent);
+
+  # car speed
+  vEgo @1 :Float32;         # best estimate of speed
+  aEgo @16 :Float32;        # best estimate of acceleration
+  vEgoRaw @17 :Float32;     # unfiltered speed from CAN sensors
+  yawRate @22 :Float32;     # best estimate of yaw rate
+  standstill @18 :Bool;
+  wheelSpeeds @2 :WheelSpeeds;
+
+  # gas pedal, 0.0-1.0
+  gas @3 :Float32;        # this is user + computer
+  gasPressed @4 :Bool;    # this is user pedal only
+
+  # brake pedal, 0.0-1.0
+  brake @5 :Float32;      # this is user pedal only
+  brakePressed @6 :Bool;  # this is user pedal only
+  brakeLights @19 :Bool;
+
+  # steering wheel
+  steeringAngle @7 :Float32;   # deg
+  steeringRate @15 :Float32;   # deg/s
+  steeringTorque @8 :Float32;  # TODO: standardize units
+  steeringPressed @9 :Bool;    # if the user is using the steering wheel
+
+  # cruise state
+  cruiseState @10 :CruiseState;
+
+  # gear
+  gearShifter @14 :GearShifter;
+
+  # button presses
+  buttonEvents @11 :List(ButtonEvent);
+  leftBlinker @20 :Bool;
+  rightBlinker @21 :Bool;
+  genericToggle @23 :Bool;
+
+  # lock info
+  doorOpen @24 :Bool;
+  seatbeltUnlatched @25 :Bool;
+
+  # which packets this state came from
+  canMonoTimes @12: List(UInt64);
+
+  struct WheelSpeeds {
+    # optional wheel speeds
+    fl @0 :Float32;
+    fr @1 :Float32;
+    rl @2 :Float32;
+    rr @3 :Float32;
+  }
+
+  struct CruiseState {
+    enabled @0 :Bool;
+    speed @1 :Float32;
+    available @2 :Bool;
+    speedOffset @3 :Float32;
+    standstill @4 :Bool;
+  }
+
+  enum GearShifter {
+    unknown @0;
+    park @1;
+    drive @2;
+    neutral @3;
+    reverse @4;
+    sport @5;
+    low @6;
+    brake @7;
+  }
+
+
+  # send on change
+  struct ButtonEvent {
+    pressed @0 :Bool;
+    type @1 :Type;
+
+    enum Type {
+      unknown @0;
+      leftBlinker @1;
+      rightBlinker @2;
+      accelCruise @3;
+      decelCruise @4;
+      cancel @5;
+      altButton1 @6;
+      altButton2 @7;
+      altButton3 @8;
+    }
+  }
+}
+
+# ******* radar state @ 20hz *******
+
+struct RadarState {
+  errors @0 :List(Error);
+  points @1 :List(RadarPoint);
+
+  # which packets this state came from
+  canMonoTimes @2 :List(UInt64);
+
+  enum Error {
+    commIssue @0;
+    fault @1;
+  }
+
+  # similar to LiveTracks
+  # is one timestamp valid for all? I think so
+  struct RadarPoint {
+    trackId @0 :UInt64;  # no trackId reuse
+
+    # these 3 are the minimum required
+    dRel @1 :Float32; # m from the front bumper of the car
+    yRel @2 :Float32; # m
+    vRel @3 :Float32; # m/s
+
+    # these are optional and valid if they are not NaN
+    aRel @4 :Float32; # m/s^2
+    yvRel @5 :Float32; # m/s
+
+    # some radars flag measurements VS estimates
+    measured @6 :Bool;
+  }
+}
+
+# ******* car controls @ 100hz *******
+
+struct CarControl {
+  # must be true for any actuator commands to work
+  enabled @0 :Bool;
+
+  gasDEPRECATED @1 :Float32;
+  brakeDEPRECATED @2 :Float32;
+  steeringTorqueDEPRECATED @3 :Float32;
+
+  actuators @6 :Actuators;
+
+  cruiseControl @4 :CruiseControl;
+  hudControl @5 :HUDControl;
+
+  struct Actuators {
+    # range from 0.0 - 1.0
+    gas @0: Float32;
+    brake @1: Float32;
+    # range from -1.0 - 1.0
+    steer @2: Float32;
+  }
+
+  struct CruiseControl {
+    cancel @0: Bool;
+    override @1: Bool;
+    speedOverride @2: Float32;
+    accelOverride @3: Float32;
+  }
+
+  struct HUDControl {
+    speedVisible @0: Bool;
+    setSpeed @1: Float32;
+    lanesVisible @2: Bool;
+    leadVisible @3: Bool;
+    visualAlert @4: VisualAlert;
+    audibleAlert @5: AudibleAlert;
+
+    enum VisualAlert {
+      # these are the choices from the Honda
+      # map as good as you can for your car
+      none @0;
+      fcw @1;
+      steerRequired @2;
+      brakePressed @3;
+      wrongGear @4;
+      seatbeltUnbuckled @5;
+      speedTooHigh @6;
+    }
+
+    enum AudibleAlert {
+      # these are the choices from the Honda
+      # map as good as you can for your car
+      none @0;
+      beepSingle @1;
+      beepTriple @2;
+      beepRepeated @3;
+      chimeSingle @4;
+      chimeDouble @5;
+      chimeRepeated @6;
+      chimeContinuous @7;
+    }
+  }
+}
+
+# ****** car param ******
+
+struct CarParams {
+  carName @0 :Text;
+  radarNameDEPRECATED @1 :Text;
+  carFingerprint @2 :Text;
+
+  enableSteer @3 :Bool;
+  enableGas @4 :Bool;
+  enableBrake @5 :Bool;
+  enableCruise @6 :Bool;
+  enableCamera @26 :Bool;
+  enableDsu @27 :Bool; # driving support unit
+  enableApgs @28 :Bool; # advanced parking guidance system
+
+  minEnableSpeed @17 :Float32;
+  safetyModel @18 :Int16;
+  safetyParam @41 :Int16;
+
+  steerMaxBP @19 :List(Float32);
+  steerMaxV @20 :List(Float32);
+  gasMaxBP @21 :List(Float32);
+  gasMaxV @22 :List(Float32);
+  brakeMaxBP @23 :List(Float32);
+  brakeMaxV @24 :List(Float32);
+
+  longPidDeadzoneBP @32 :List(Float32);
+  longPidDeadzoneV @33 :List(Float32);
+
+  enum SafetyModels {
+    # does NOT match board setting
+    noOutput @0;
+    honda @1;
+    toyota @2;
+    elm327 @3;
+  }
+
+  # things about the car in the manual
+  mass @7 :Float32;             # [kg] running weight
+  wheelbase @8 :Float32;        # [m] distance from rear to front axle
+  centerToFront @9 :Float32;   # [m] GC distance to front axle
+  steerRatio @10 :Float32;       # [] ratio between front wheels and steering wheel angles
+  steerRatioRear @11 :Float32;  # [] rear steering ratio wrt front steering (usually 0)
+
+  # things we can derive
+  rotationalInertia @12 :Float32;    # [kg*m2] body rotational inertia
+  tireStiffnessFront @13 :Float32;   # [N/rad] front tire coeff of stiff
+  tireStiffnessRear @14 :Float32;    # [N/rad] rear tire coeff of stiff
+
+  # Kp and Ki for the lateral control
+  steerKp @15 :Float32;
+  steerKi @16 :Float32;
+  steerKf @25 :Float32;
+
+  # Kp and Ki for the longitudinal control
+  longitudinalKpBP @36 :List(Float32);
+  longitudinalKpV @37 :List(Float32);
+  longitudinalKiBP @38 :List(Float32);
+  longitudinalKiV @39 :List(Float32);
+
+  steerLimitAlert @29 :Bool;
+
+  vEgoStopping @30 :Float32; # Speed at which the car goes into stopping state
+  directAccelControl @31 :Bool; # Does the car have direct accel control or just gas/brake
+  stoppingControl @34 :Bool; # Does the car allows full control even at lows speeds when stopping
+  startAccel @35 :Float32; # Required acceleraton to overcome creep braking
+  steerRateCost @40 :Float32; # Lateral MPC cost on steering rate
+}

cereal/custom.capnp

@@ -1,383 +0,0 @@
-using Cxx = import "./include/c++.capnp";
-$Cxx.namespace("cereal");
-
-using Car = import "car.capnp";
-
-@0xb526ba661d550a59;
-
-# custom.capnp: a home for empty structs reserved for custom forks
-# These structs are guaranteed to remain reserved and empty in mainline
-# cereal, so use these if you want custom events in your fork.
-
-# DO rename the structs
-# DON'T change the identifier (e.g. @0x81c2f05a394cf4af)
-
-struct FrogPilotCarControl @0x81c2f05a394cf4af {
-  hudControl @0 :HUDControl;
-
-  struct HUDControl {
-    audibleAlert @0 :AudibleAlert;
-
-    enum AudibleAlert {
-      none @0;
-
-      engage @1;
-      disengage @2;
-      refuse @3;
-
-      warningSoft @4;
-      warningImmediate @5;
-
-      prompt @6;
-      promptRepeat @7;
-      promptDistracted @8;
-
-      # Random Events
-      angry @9;
-      continued @10;
-      dejaVu @11;
-      doc @12;
-      fart @13;
-      firefox @14;
-      goat @15;
-      hal9000 @16;
-      mail @17;
-      nessie @18;
-      noice @19;
-      startup @20;
-      thisIsFine @21;
-      uwu @22;
-    }
-  }
-}
-
-struct FrogPilotCarParams @0xaedffd8f31e7b55d {
-  alternativeExperience @0 :Int16;
-  canUsePedal @1 :Bool;
-  canUseSDSU @2 :Bool;
-  flags @3 :UInt32;
-  isHDA2 @4 :Bool;
-  openpilotLongitudinalControlDisabled @5 :Bool;
-  safetyConfigs @6 :List(SafetyConfig);
-
-  struct SafetyConfig {
-    safetyParam @0 :UInt16;
-  }
-}
-
-struct FrogPilotCarState @0xf35cc4560bbf6ec2 {
-  accelPressed @0 :Bool;
-  alwaysOnLateralEnabled @1 :Bool;
-  brakeLights @2 :Bool;
-  dashboardSpeedLimit @3 :Float32;
-  decelPressed @4 :Bool;
-  distancePressed @5 :Bool;
-  distanceLongPressed @6 :Bool;
-  distanceVeryLongPressed @7 :Bool;
-  ecoGear @8 :Bool;
-  forceCoast @9 :Bool;
-  isParked @10 :Bool;
-  pauseLateral @11 :Bool;
-  pauseLongitudinal @12 :Bool;
-  sportGear @13 :Bool;
-  trafficModeEnabled @14 :Bool;
-  gasStack @15 :Bool;  # Compatibility with older StarPilot payloads
-}
-
-struct FrogPilotDeviceState @0xda96579883444c35 {
-  freeSpace @0 :Int16;
-  usedSpace @1 :Int16;
-}
-
-struct FrogPilotModelDataV2 @0x80ae746ee2596b11 {
-  turnDirection @0 :TurnDirection;
-
-  enum TurnDirection {
-    none @0;
-    turnLeft @1;
-    turnRight @2;
-  }
-}
-
-struct FrogPilotOnroadEvent @0xa5cd762cd951a455 {
-  name @0 :EventName;
-
-  enable @1 :Bool;
-  noEntry @2 :Bool;
-  warning @3 :Bool;
-  userDisable @4 :Bool;
-  softDisable @5 :Bool;
-  immediateDisable @6 :Bool;
-  preEnable @7 :Bool;
-  permanent @8 :Bool;
-  overrideLateral @9 :Bool;
-  overrideLongitudinal @10 :Bool;
-
-  enum EventName {
-    blockUser @0;
-    customStartupAlert @1;
-    forcingStop @2;
-    goatSteerSaturated @3;
-    greenLight @4;
-    holidayActive @5;
-    laneChangeBlockedLoud @6;
-    leadDeparting @7;
-    noLaneAvailable @8;
-    nnffLoaded @9;
-    openpilotCrashed @10;
-    pedalInterceptorNoBrake @11;
-    speedLimitChanged @12;
-    trafficModeActive @13;
-    trafficModeInactive @14;
-    turningLeft @15;
-    turningRight @16;
-
-    # Random Events
-    accel30 @17;
-    accel35 @18;
-    accel40 @19;
-    dejaVuCurve @20;
-    firefoxSteerSaturated @21;
-    hal9000 @22;
-    openpilotCrashedRandomEvent @23;
-    thisIsFineSteerSaturated @24;
-    toBeContinued @25;
-    vCruise69 @26;
-    yourFrogTriedToKillMe @27;
-    youveGotMail @28;
-  }
-}
-
-struct FrogPilotPlan @0xf98d843bfd7004a3 {
-  accelerationJerk @0 :Float32;
-  cscControllingSpeed @1 :Bool;
-  cscSpeed @2 :Float32;
-  cscTraining @3 :Bool;
-  dangerFactor @4 :Float32;
-  dangerJerk @5 :Float32;
-  desiredFollowDistance @6 :Int64;
-  experimentalMode @7 :Bool;
-  forcingStop @8 :Bool;
-  forcingStopLength @9 :Float32;
-  frogpilotEvents @10 :List(FrogPilotOnroadEvent);
-  frogpilotToggles @11 :Text;
-  increasedStoppedDistance @12 :Float32;
-  lateralCheck @13 :Bool;
-  laneWidthLeft @14 :Float32;
-  laneWidthRight @15 :Float32;
-  maxAcceleration @16 :Float32;
-  minAcceleration @17 :Float32;
-  redLight @18 :Bool;
-  roadCurvature @19 :Float32;
-  slcMapSpeedLimit @20 :Float32;
-  slcMapboxSpeedLimit @21 :Float32;
-  slcNextSpeedLimit @22 :Float32;
-  slcOverriddenSpeed @23 :Float32;
-  slcSpeedLimit @24 :Float32;
-  slcSpeedLimitOffset @25 :Float32;
-  slcSpeedLimitSource @26 :Text;
-  speedJerk @27 :Float32;
-  speedLimitChanged @28 :Bool;
-  tFollow @29 :Float32;
-  themeUpdated @30 :Bool;
-  unconfirmedSlcSpeedLimit @31 :Float32;
-  vCruise @32 :Float32;
-  weatherDaytime @33 :Bool;
-  weatherId @34 :Int16;
-  disableThrottle @35 :Bool;
-}
-
-struct FrogPilotRadarState @0xb86e6369214c01c8 {
-  leadLeft @0 :LeadData;
-  leadRight @1 :LeadData;
-
-  struct LeadData {
-    dRel @0 :Float32;
-    yRel @1 :Float32;
-    vRel @2 :Float32;
-    aRel @3 :Float32;
-    vLead @4 :Float32;
-    dPath @6 :Float32;
-    vLat @7 :Float32;
-    vLeadK @8 :Float32;
-    aLeadK @9 :Float32;
-    fcw @10 :Bool;
-    status @11 :Bool;
-    aLeadTau @12 :Float32;
-    modelProb @13 :Float32;
-    radar @14 :Bool;
-    radarTrackId @15 :Int32 = -1;
-
-    aLeadDEPRECATED @5 :Float32;
-  }
-}
-
-struct FrogPilotSelfdriveState @0xf416ec09499d9d19 {
-  alertText1 @0 :Text;
-  alertText2 @1 :Text;
-  alertStatus @2 :AlertStatus;
-  alertSize @3 :AlertSize;
-  alertType @4 :Text;
-  alertSound @5 :Car.CarControl.HUDControl.AudibleAlert;
-
-  enum AlertStatus {
-    normal @0;
-    userPrompt @1;
-    critical @2;
-    frogpilot @3;
-  }
-
-  enum AlertSize {
-    none @0;
-    small @1;
-    mid @2;
-    full @3;
-  }
-}
-
-struct CustomReserved9 @0xa1680744031fdb2d {
-}
-
-struct CustomReserved10 @0xcb9fd56c7057593a {
-}
-
-struct CustomReserved11 @0xc2243c65e0340384 {
-}
-
-struct CustomReserved12 @0x9ccdc8676701b412 {
-}
-
-struct CustomReserved13 @0xcd96dafb67a082d0 {
-}
-
-struct CustomReserved14 @0xb057204d7deadf3f {
-}
-
-struct CustomReserved15 @0xbd443b539493bc68 {
-}
-
-struct CustomReserved16 @0xfc6241ed8877b611 {
-}
-
-struct MapdDownloadLocationDetails @0xff889853e7b0987f {
-  location @0 :Text;
-  totalFiles @1 :UInt32;
-  downloadedFiles @2 :UInt32;
-}
-
-struct MapdDownloadProgress @0xfaa35dcac85073a2 {
-  active @0 :Bool;
-  cancelled @1 :Bool;
-  totalFiles @2 :UInt32;
-  downloadedFiles @3 :UInt32;
-  locations @4 :List(Text);
-  locationDetails @5 :List(MapdDownloadLocationDetails);
-}
-
-struct MapdPathPoint @0xd6f78acca1bc3939 {
-  latitude @0 :Float64;
-  longitude @1 :Float64;
-  curvature @2 :Float32;
-  targetVelocity @3 :Float32;
-}
-
-struct MapdExtendedOut @0xa30662f84033036c {
-  downloadProgress @0 :MapdDownloadProgress;
-  settings @1 :Text;
-  path @2 :List(MapdPathPoint);
-}
-
-enum MapdInputType {
-  download @0;
-  setTargetLateralAccel @1;
-  setSpeedLimitOffset @2;
-  setSpeedLimitControl @3;
-  setMapCurveSpeedControl @4;
-  setVisionCurveSpeedControl @5;
-  setLogLevel @6;
-  setVisionCurveTargetLatA @7;
-  setVisionCurveMinTargetV @8;
-  reloadSettings @9;
-  saveSettings @10;
-  setEnableSpeed @11;
-  setVisionCurveUseEnableSpeed @12;
-  setMapCurveUseEnableSpeed @13;
-  setSpeedLimitUseEnableSpeed @14;
-  setHoldLastSeenSpeedLimit @15;
-  setTargetSpeedJerk @16;
-  setTargetSpeedAccel @17;
-  setTargetSpeedTimeOffset @18;
-  setDefaultLaneWidth @19;
-  setMapCurveTargetLatA @20;
-  loadDefaultSettings @21;
-  loadRecommendedSettings @22;
-  setSlowDownForNextSpeedLimit @23;
-  setSpeedUpForNextSpeedLimit @24;
-  setHoldSpeedLimitWhileChangingSetSpeed @25;
-  loadPersistentSettings @26;
-  cancelDownload @27;
-  setLogJson @28;
-  setLogSource @29;
-  setExternalSpeedLimitControl @30;
-  setExternalSpeedLimit @31;
-  setSpeedLimitPriority @32;
-  setSpeedLimitChangeRequiresAccept @33;
-  acceptSpeedLimit @34;
-  setPressGasToAcceptSpeedLimit @35;
-  setAdjustSetSpeedToAcceptSpeedLimit @36;
-  setAcceptSpeedLimitTimeout @37;
-  setPressGasToOverrideSpeedLimit @38;
-}
-
-enum WaySelectionType {
-  current @0;
-  predicted @1;
-  possible @2;
-  extended @3;
-  fail @4;
-}
-
-enum SpeedLimitOffsetType {
-  static @0;
-  percent @1;
-}
-
-struct MapdIn @0xc86a3d38d13eb3ef {
-  type @0 :MapdInputType;
-  float @1 :Float32;
-  str @2 :Text;
-  bool @3 :Bool;
-}
-
-enum RoadContext {
-  freeway @0;
-  city @1;
-  unknown @2;
-}
-
-struct MapdOut @0xa4f1eb3323f5f582 {
-  wayName @0 :Text;
-  wayRef @1 :Text;
-  roadName @2 :Text;
-  speedLimit @3 :Float32;
-  nextSpeedLimit @4 :Float32;
-  nextSpeedLimitDistance @5 :Float32;
-  hazard @6 :Text;
-  nextHazard @7 :Text;
-  nextHazardDistance @8 :Float32;
-  advisorySpeed @9 :Float32;
-  nextAdvisorySpeed @10 :Float32;
-  nextAdvisorySpeedDistance @11 :Float32;
-  oneWay @12 :Bool;
-  lanes @13 :UInt8;
-  tileLoaded @14 :Bool;
-  speedLimitSuggestedSpeed @15 :Float32;
-  suggestedSpeed @16 :Float32;
-  estimatedRoadWidth @17 :Float32;
-  roadContext @18 :RoadContext;
-  distanceFromWayCenter @19 :Float32;
-  visionCurveSpeed @20 :Float32;
-  mapCurveSpeed @21 :Float32;
-  waySelectionType @22 :WaySelectionType;
-  speedLimitAccepted @23 :Bool;
-}

cereal/java.capnp

@@ -0,0 +1,28 @@
+# Copyright (c) 2013-2015 Sandstorm Development Group, Inc. and contributors
+# Licensed under the MIT License:
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+
+@0xc5f1af96651f70ea;
+
+annotation package @0x9ee4c8f803b3b596 (file) : Text;
+# Name of the package, such as "org.example.foo", in which the generated code will reside.
+
+annotation outerClassname @0x9b066bb4881f7cd3 (file) : Text;
+# Name of the outer class that will wrap the generated code.

cereal/legacy.capnp

@@ -1,574 +0,0 @@
-using Cxx = import "./include/c++.capnp";
-$Cxx.namespace("cereal");
-
-@0x80ef1ec4889c2a63;
-
-# legacy.capnp: a home for deprecated structs
-
-struct LogRotate @0x9811e1f38f62f2d1 {
-  segmentNum @0 :Int32;
-  path @1 :Text;
-}
-
-struct LiveUI @0xc08240f996aefced {
-  rearViewCam @0 :Bool;
-  alertText1 @1 :Text;
-  alertText2 @2 :Text;
-  awarenessStatus @3 :Float32;
-}
-
-struct UiLayoutState @0x88dcce08ad29dda0 {
-  activeApp @0 :App;
-  sidebarCollapsed @1 :Bool;
-  mapEnabled @2 :Bool;
-  mockEngaged @3 :Bool;
-
-  enum App @0x9917470acf94d285 {
-    home @0;
-    music @1;
-    nav @2;
-    settings @3;
-    none @4;
-  }
-}
-
-struct OrbslamCorrection @0x8afd33dc9b35e1aa {
-  correctionMonoTime @0 :UInt64;
-  prePositionECEF @1 :List(Float64);
-  postPositionECEF @2 :List(Float64);
-  prePoseQuatECEF @3 :List(Float32);
-  postPoseQuatECEF @4 :List(Float32);
-  numInliers @5 :UInt32;
-}
-
-struct EthernetPacket @0xa99a9d5b33cf5859 {
-  pkt @0 :Data;
-  ts @1 :Float32;
-}
-
-struct CellInfo @0xcff7566681c277ce {
-  timestamp @0 :UInt64;
-  repr @1 :Text; # android toString() for now
-}
-
-struct WifiScan @0xd4df5a192382ba0b {
-  bssid @0 :Text;
-  ssid @1 :Text;
-  capabilities @2 :Text;
-  frequency @3 :Int32;
-  level @4 :Int32;
-  timestamp @5 :Int64;
-
-  centerFreq0 @6 :Int32;
-  centerFreq1 @7 :Int32;
-  channelWidth @8 :ChannelWidth;
-  operatorFriendlyName @9 :Text;
-  venueName @10 :Text;
-  is80211mcResponder @11 :Bool;
-  passpoint @12 :Bool;
-
-  distanceCm @13 :Int32;
-  distanceSdCm @14 :Int32;
-
-  enum ChannelWidth @0xcb6a279f015f6b51 {
-    w20Mhz @0;
-    w40Mhz @1;
-    w80Mhz @2;
-    w160Mhz @3;
-    w80Plus80Mhz @4;
-  }
-}
-
-struct LiveEventData @0x94b7baa90c5c321e {
-  name @0 :Text;
-  value @1 :Int32;
-}
-
-struct ModelData @0xb8aad62cffef28a9 {
-  frameId @0 :UInt32;
-  frameAge @12 :UInt32;
-  frameDropPerc @13 :Float32;
-  timestampEof @9 :UInt64;
-  modelExecutionTime @14 :Float32;
-  gpuExecutionTime @16 :Float32;
-  rawPred @15 :Data;
-
-  path @1 :PathData;
-  leftLane @2 :PathData;
-  rightLane @3 :PathData;
-  lead @4 :LeadData;
-  freePath @6 :List(Float32);
-
-  settings @5 :ModelSettings;
-  leadFuture @7 :LeadData;
-  speed @8 :List(Float32);
-  meta @10 :MetaData;
-  longitudinal @11 :LongitudinalData;
-
-  struct PathData @0x8817eeea389e9f08 {
-    points @0 :List(Float32);
-    prob @1 :Float32;
-    std @2 :Float32;
-    stds @3 :List(Float32);
-    poly @4 :List(Float32);
-    validLen @5 :Float32;
-  }
-
-  struct LeadData @0xd1c9bef96d26fa91 {
-    dist @0 :Float32;
-    prob @1 :Float32;
-    std @2 :Float32;
-    relVel @3 :Float32;
-    relVelStd @4 :Float32;
-    relY @5 :Float32;
-    relYStd @6 :Float32;
-    relA @7 :Float32;
-    relAStd @8 :Float32;
-  }
-
-  struct ModelSettings @0xa26e3710efd3e914 {
-    bigBoxX @0 :UInt16;
-    bigBoxY @1 :UInt16;
-    bigBoxWidth @2 :UInt16;
-    bigBoxHeight @3 :UInt16;
-    boxProjection @4 :List(Float32);
-    yuvCorrection @5 :List(Float32);
-    inputTransform @6 :List(Float32);
-  }
-
-  struct MetaData @0x9744f25fb60f2bf8 {
-    engagedProb @0 :Float32;
-    desirePrediction @1 :List(Float32);
-    brakeDisengageProb @2 :Float32;
-    gasDisengageProb @3 :Float32;
-    steerOverrideProb @4 :Float32;
-    desireState @5 :List(Float32);
-  }
-
-  struct LongitudinalData @0xf98f999c6a071122 {
-    distances @2 :List(Float32);
-    speeds @0 :List(Float32);
-    accelerations @1 :List(Float32);
-  }
-}
-
-struct ECEFPoint @0xc25bbbd524983447 {
-  x @0 :Float64;
-  y @1 :Float64;
-  z @2 :Float64;
-}
-
-struct ECEFPointDEPRECATED @0xe10e21168db0c7f7 {
-  x @0 :Float32;
-  y @1 :Float32;
-  z @2 :Float32;
-}
-
-struct GPSPlannerPoints @0xab54c59699f8f9f3 {
-  curPosDEPRECATED @0 :ECEFPointDEPRECATED;
-  pointsDEPRECATED @1 :List(ECEFPointDEPRECATED);
-  curPos @6 :ECEFPoint;
-  points @7 :List(ECEFPoint);
-  valid @2 :Bool;
-  trackName @3 :Text;
-  speedLimit @4 :Float32;
-  accelTarget @5 :Float32;
-}
-
-struct GPSPlannerPlan @0xf5ad1d90cdc1dd6b {
-  valid @0 :Bool;
-  poly @1 :List(Float32);
-  trackName @2 :Text;
-  speed @3 :Float32;
-  acceleration @4 :Float32;
-  pointsDEPRECATED @5 :List(ECEFPointDEPRECATED);
-  points @6 :List(ECEFPoint);
-  xLookahead @7 :Float32;
-}
-
-struct UiNavigationEvent @0x90c8426c3eaddd3b {
-  type @0: Type;
-  status @1: Status;
-  distanceTo @2: Float32;
-  endRoadPointDEPRECATED @3: ECEFPointDEPRECATED;
-  endRoadPoint @4: ECEFPoint;
-
-  enum Type @0xe8db07dcf8fcea05 {
-    none @0;
-    laneChangeLeft @1;
-    laneChangeRight @2;
-    mergeLeft @3;
-    mergeRight @4;
-    turnLeft @5;
-    turnRight @6;
-  }
-
-  enum Status @0xb9aa88c75ef99a1f {
-    none @0;
-    passive @1;
-    approaching @2;
-    active @3;
-  }
-}
-
-struct LiveLocationData @0xb99b2bc7a57e8128 {
-  status @0 :UInt8;
-
-  # 3D fix
-  lat @1 :Float64;
-  lon @2 :Float64;
-  alt @3 :Float32;     # m
-
-  # speed
-  speed @4 :Float32;   # m/s
-
-  # NED velocity components
-  vNED @5 :List(Float32);
-
-  # roll, pitch, heading (x,y,z)
-  roll @6 :Float32;     # WRT to center of earth?
-  pitch @7 :Float32;    # WRT to center of earth?
-  heading @8 :Float32;  # WRT to north?
-
-  # what are these?
-  wanderAngle @9 :Float32;
-  trackAngle @10 :Float32;
-
-  # car frame -- https://upload.wikimedia.org/wikipedia/commons/f/f5/RPY_angles_of_cars.png
-
-  # gyro, in car frame, deg/s
-  gyro @11 :List(Float32);
-
-  # accel, in car frame, m/s^2
-  accel @12 :List(Float32);
-
-  accuracy @13 :Accuracy;
-
-  source @14 :SensorSource;
-  # if we are fixing a location in the past
-  fixMonoTime @15 :UInt64;
-
-  gpsWeek @16 :Int32;
-  timeOfWeek @17 :Float64;
-
-  positionECEF @18 :List(Float64);
-  poseQuatECEF @19 :List(Float32);
-  pitchCalibration @20 :Float32;
-  yawCalibration @21 :Float32;
-  imuFrame @22 :List(Float32);
-
-  struct Accuracy @0x943dc4625473b03f {
-    pNEDError @0 :List(Float32);
-    vNEDError @1 :List(Float32);
-    rollError @2 :Float32;
-    pitchError @3 :Float32;
-    headingError @4 :Float32;
-    ellipsoidSemiMajorError @5 :Float32;
-    ellipsoidSemiMinorError @6 :Float32;
-    ellipsoidOrientationError @7 :Float32;
-  }
-
-  enum SensorSource @0xc871d3cc252af657 {
-    applanix @0;
-    kalman @1;
-    orbslam @2;
-    timing @3;
-    dummy @4;
-  }
-}
-
-struct OrbOdometry @0xd7700859ed1f5b76 {
-  # timing first
-  startMonoTime @0 :UInt64;
-  endMonoTime @1 :UInt64;
-
-  # fundamental matrix and error
-  f @2: List(Float64);
-  err @3: Float64;
-
-  # number of inlier points
-  inliers @4: Int32;
-
-  # for debug only
-  # indexed by endMonoTime features
-  # value is startMonoTime feature match
-  # -1 if no match
-  matches @5: List(Int16);
-}
-
-struct OrbFeatures @0xcd60164a8a0159ef {
-  timestampEof @0 :UInt64;
-  # transposed arrays of normalized image coordinates
-  # len(xs) == len(ys) == len(descriptors) * 32
-  xs @1 :List(Float32);
-  ys @2 :List(Float32);
-  descriptors @3 :Data;
-  octaves @4 :List(Int8);
-
-  # match index to last OrbFeatures
-  # -1 if no match
-  timestampLastEof @5 :UInt64;
-  matches @6: List(Int16);
-}
-
-struct OrbFeaturesSummary @0xd500d30c5803fa4f {
-  timestampEof @0 :UInt64;
-  timestampLastEof @1 :UInt64;
-
-  featureCount @2 :UInt16;
-  matchCount @3 :UInt16;
-  computeNs @4 :UInt64;
-}
-
-struct OrbKeyFrame @0xc8233c0345e27e24 {
-  # this is a globally unique id for the KeyFrame
-  id @0: UInt64;
-
-  # this is the location of the KeyFrame
-  pos @1: ECEFPoint;
-
-  # these are the features in the world
-  # len(dpos) == len(descriptors) * 32
-  dpos @2 :List(ECEFPoint);
-  descriptors @3 :Data;
-}
-
-struct KalmanOdometry @0x92e21bb7ea38793a {
-  trans @0 :List(Float32); # m/s in device frame
-  rot @1 :List(Float32); # rad/s in device frame
-  transStd @2 :List(Float32); # std m/s in device frame
-  rotStd @3 :List(Float32); # std rad/s in device frame
-}
-
-struct OrbObservation @0x9b326d4e436afec7 {
-  observationMonoTime @0 :UInt64;
-  normalizedCoordinates @1 :List(Float32);
-  locationECEF @2 :List(Float64);
-  matchDistance @3: UInt32;
-}
-
-struct CalibrationFeatures @0x8fdfadb254ea867a {
-  frameId @0 :UInt32;
-
-  p0 @1 :List(Float32);
-  p1 @2 :List(Float32);
-  status @3 :List(Int8);
-}
-
-struct NavStatus @0xbd8822120928120c {
-  isNavigating @0 :Bool;
-  currentAddress @1 :Address;
-
-  struct Address @0xce7cd672cacc7814 {
-    title @0 :Text;
-    lat @1 :Float64;
-    lng @2 :Float64;
-    house @3 :Text;
-    address @4 :Text;
-    street @5 :Text;
-    city @6 :Text;
-    state @7 :Text;
-    country @8 :Text;
-  }
-}
-
-struct NavUpdate @0xdb98be6565516acb {
-  isNavigating @0 :Bool;
-  curSegment @1 :Int32;
-  segments @2 :List(Segment);
-
-  struct LatLng @0x9eaef9187cadbb9b {
-    lat @0 :Float64;
-    lng @1 :Float64;
-  }
-
-  struct Segment @0xa5b39b4fc4d7da3f {
-    from @0 :LatLng;
-    to @1 :LatLng;
-    updateTime @2 :Int32;
-    distance @3 :Int32;
-    crossTime @4 :Int32;
-    exitNo @5 :Int32;
-    instruction @6 :Instruction;
-
-    parts @7 :List(LatLng);
-
-    enum Instruction @0xc5417a637451246f {
-      turnLeft @0;
-      turnRight @1;
-      keepLeft @2;
-      keepRight @3;
-      straight @4;
-      roundaboutExitNumber @5;
-      roundaboutExit @6;
-      roundaboutTurnLeft @7;
-      unkn8 @8;
-      roundaboutStraight @9;
-      unkn10 @10;
-      roundaboutTurnRight @11;
-      unkn12 @12;
-      roundaboutUturn @13;
-      unkn14 @14;
-      arrive @15;
-      exitLeft @16;
-      exitRight @17;
-      unkn18 @18;
-      uturn @19;
-      # ...
-    }
-  }
-}
-
-struct TrafficEvent @0xacfa74a094e62626 {
-  type @0 :Type;
-  distance @1 :Float32;
-  action @2 :Action;
-  resuming @3 :Bool;
-
-  enum Type @0xd85d75253435bf4b {
-    stopSign @0;
-    lightRed @1;
-    lightYellow @2;
-    lightGreen @3;
-    stopLight @4;
-  }
-
-  enum Action @0xa6f6ce72165ccb49 {
-    none @0;
-    yield @1;
-    stop @2;
-    resumeReady @3;
-  }
-
-}
-
-
-struct AndroidGnss @0xdfdf30d03fc485bd {
-  union {
-    measurements @0 :Measurements;
-    navigationMessage @1 :NavigationMessage;
-  }
-
-  struct Measurements @0xa20710d4f428d6cd {
-    clock @0 :Clock;
-    measurements @1 :List(Measurement);
-
-    struct Clock @0xa0e27b453a38f450 {
-      timeNanos @0 :Int64;
-      hardwareClockDiscontinuityCount @1 :Int32;
-
-      hasTimeUncertaintyNanos @2 :Bool;
-      timeUncertaintyNanos @3 :Float64;
-
-      hasLeapSecond @4 :Bool;
-      leapSecond @5 :Int32;
-
-      hasFullBiasNanos @6 :Bool;
-      fullBiasNanos @7 :Int64;
-
-      hasBiasNanos @8 :Bool;
-      biasNanos @9 :Float64;
-
-      hasBiasUncertaintyNanos @10 :Bool;
-      biasUncertaintyNanos @11 :Float64;
-
-      hasDriftNanosPerSecond @12 :Bool;
-      driftNanosPerSecond @13 :Float64;
-
-      hasDriftUncertaintyNanosPerSecond @14 :Bool;
-      driftUncertaintyNanosPerSecond @15 :Float64;
-    }
-
-    struct Measurement @0xd949bf717d77614d {
-      svId @0 :Int32;
-      constellation @1 :Constellation;
-
-      timeOffsetNanos @2 :Float64;
-      state @3 :Int32;
-      receivedSvTimeNanos @4 :Int64;
-      receivedSvTimeUncertaintyNanos @5 :Int64;
-      cn0DbHz @6 :Float64;
-      pseudorangeRateMetersPerSecond @7 :Float64;
-      pseudorangeRateUncertaintyMetersPerSecond @8 :Float64;
-      accumulatedDeltaRangeState @9 :Int32;
-      accumulatedDeltaRangeMeters @10 :Float64;
-      accumulatedDeltaRangeUncertaintyMeters @11 :Float64;
-
-      hasCarrierFrequencyHz @12 :Bool;
-      carrierFrequencyHz @13 :Float32;
-      hasCarrierCycles @14 :Bool;
-      carrierCycles @15 :Int64;
-      hasCarrierPhase @16 :Bool;
-      carrierPhase @17 :Float64;
-      hasCarrierPhaseUncertainty @18 :Bool;
-      carrierPhaseUncertainty @19 :Float64;
-      hasSnrInDb @20 :Bool;
-      snrInDb @21 :Float64;
-
-      multipathIndicator @22 :MultipathIndicator;
-
-      enum Constellation @0x9ef1f3ff0deb5ffb {
-        unknown @0;
-        gps @1;
-        sbas @2;
-        glonass @3;
-        qzss @4;
-        beidou @5;
-        galileo @6;
-      }
-
-      enum State @0xcbb9490adce12d72 {
-        unknown @0;
-        codeLock @1;
-        bitSync @2;
-        subframeSync @3;
-        towDecoded @4;
-        msecAmbiguous @5;
-        symbolSync @6;
-        gloStringSync @7;
-        gloTodDecoded @8;
-        bdsD2BitSync @9;
-        bdsD2SubframeSync @10;
-        galE1bcCodeLock @11;
-        galE1c2ndCodeLock @12;
-        galE1bPageSync @13;
-        sbasSync @14;
-      }
-
-      enum MultipathIndicator @0xc04e7b6231d4caa8 {
-        unknown @0;
-        detected @1;
-        notDetected @2;
-      }
-    }
-  }
-
-  struct NavigationMessage @0xe2517b083095fd4e {
-    type @0 :Int32;
-    svId @1 :Int32;
-    messageId @2 :Int32;
-    submessageId @3 :Int32;
-    data @4 :Data;
-    status @5 :Status;
-
-    enum Status @0xec1ff7996b35366f {
-      unknown @0;
-      parityPassed @1;
-      parityRebuilt @2;
-    }
-  }
-}
-
-struct LidarPts @0xe3d6685d4e9d8f7a {
-  r @0 :List(UInt16);        # uint16   m*500.0
-  theta @1 :List(UInt16);    # uint16 deg*100.0
-  reflect @2 :List(UInt8);   # uint8      0-255
-
-  # For storing out of file.
-  idx @3 :UInt64;
-
-  # For storing in file
-  pkt @4 :Data;
-}
-
-

cereal/messaging/__init__.py

@@ -1,294 +0,0 @@
-# must be built with scons
-from msgq.ipc_pyx import Context, Poller, SubSocket, PubSocket, SocketEventHandle, toggle_fake_events, \
-                                set_fake_prefix, get_fake_prefix, delete_fake_prefix, wait_for_one_event
-from msgq.ipc_pyx import MultiplePublishersError, IpcError
-from msgq import fake_event_handle, drain_sock_raw
-import msgq
-
-import os
-import capnp
-import time
-
-from typing import Optional, List, Union, Dict
-
-from cereal import log
-from cereal.services import SERVICE_LIST
-from openpilot.common.util import MovingAverage
-
-NO_TRAVERSAL_LIMIT = 2**64-1
-
-
-def pub_sock(endpoint: str) -> PubSocket:
-  service = SERVICE_LIST.get(endpoint)
-  segment_size = service.queue_size if service else 0
-  return msgq.pub_sock(endpoint, segment_size)
-
-
-def sub_sock(endpoint: str, poller: Optional[Poller] = None, addr: str = "127.0.0.1",
-             conflate: bool = False, timeout: Optional[int] = None) -> SubSocket:
-  service = SERVICE_LIST.get(endpoint)
-  segment_size = service.queue_size if service else 0
-  return msgq.sub_sock(endpoint, poller=poller, addr=addr, conflate=conflate,
-                       timeout=timeout, segment_size=segment_size)
-
-
-def reset_context():
-  msgq.context = Context()
-
-
-def log_from_bytes(dat: bytes, struct: capnp.lib.capnp._StructModule = log.Event) -> capnp.lib.capnp._DynamicStructReader:
-  with struct.from_bytes(dat, traversal_limit_in_words=NO_TRAVERSAL_LIMIT) as msg:
-    return msg
-
-
-def new_message(service: Optional[str], size: Optional[int] = None, **kwargs) -> capnp.lib.capnp._DynamicStructBuilder:
-  args = {
-    'valid': False,
-    'logMonoTime': int(time.monotonic() * 1e9),
-    **kwargs
-  }
-  dat = log.Event.new_message(**args)
-  if service is not None:
-    if size is None:
-      dat.init(service)
-    else:
-      dat.init(service, size)
-  return dat
-
-
-def drain_sock(sock: SubSocket, wait_for_one: bool = False) -> List[capnp.lib.capnp._DynamicStructReader]:
-  """Receive all message currently available on the queue"""
-  msgs = drain_sock_raw(sock, wait_for_one=wait_for_one)
-  return [log_from_bytes(m) for m in msgs]
-
-
-# TODO: print when we drop packets?
-def recv_sock(sock: SubSocket, wait: bool = False) -> Optional[capnp.lib.capnp._DynamicStructReader]:
-  """Same as drain sock, but only returns latest message. Consider using conflate instead."""
-  dat = None
-
-  while 1:
-    if wait and dat is None:
-      recv = sock.receive()
-    else:
-      recv = sock.receive(non_blocking=True)
-
-    if recv is None:  # Timeout hit
-      break
-
-    dat = recv
-
-  if dat is not None:
-    dat = log_from_bytes(dat)
-
-  return dat
-
-
-def recv_one(sock: SubSocket) -> Optional[capnp.lib.capnp._DynamicStructReader]:
-  dat = sock.receive()
-  if dat is not None:
-    dat = log_from_bytes(dat)
-  return dat
-
-
-def recv_one_or_none(sock: SubSocket) -> Optional[capnp.lib.capnp._DynamicStructReader]:
-  dat = sock.receive(non_blocking=True)
-  if dat is not None:
-    dat = log_from_bytes(dat)
-  return dat
-
-
-def recv_one_retry(sock: SubSocket) -> capnp.lib.capnp._DynamicStructReader:
-  """Keep receiving until we get a message"""
-  while True:
-    dat = sock.receive()
-    if dat is not None:
-      return log_from_bytes(dat)
-
-
-class FrequencyTracker:
-  def __init__(self, service_freq: float, update_freq: float, is_poll: bool):
-    freq = max(min(service_freq, update_freq), 1.)
-    if is_poll:
-      min_freq = max_freq = freq
-    else:
-      max_freq = min(freq, update_freq)
-      if service_freq >= 2 * update_freq:
-        min_freq = update_freq
-      elif update_freq >= 2* service_freq:
-        min_freq = freq
-      else:
-        min_freq = min(freq, freq / 2.)
-
-    self.min_freq = min_freq * 0.8
-    self.max_freq = max_freq * 1.2
-    self.avg_dt = MovingAverage(int(10 * freq))
-    self.recent_avg_dt = MovingAverage(int(freq))
-    self.prev_time = 0.0
-
-  def record_recv_time(self, cur_time: float) -> None:
-    # TODO: Handle case where cur_time is less than prev_time
-    if self.prev_time > 1e-5:
-      dt = cur_time - self.prev_time
-
-      self.avg_dt.add_value(dt)
-      self.recent_avg_dt.add_value(dt)
-
-    self.prev_time = cur_time
-
-  @property
-  def valid(self) -> bool:
-    if self.avg_dt.count == 0:
-      return False
-
-    avg_freq = 1.0 / self.avg_dt.get_average()
-    if self.min_freq <= avg_freq <= self.max_freq:
-      return True
-
-    avg_freq_recent = 1.0 / self.recent_avg_dt.get_average()
-    return self.min_freq <= avg_freq_recent <= self.max_freq
-
-
-class SubMaster:
-  def __init__(self, services: List[str], poll: Optional[str] = None,
-               ignore_alive: Optional[List[str]] = None, ignore_avg_freq: Optional[List[str]] = None,
-               ignore_valid: Optional[List[str]] = None, addr: str = "127.0.0.1", frequency: Optional[float] = None):
-    self.frame = -1
-    self.services = services
-    self.seen = {s: False for s in services}
-    self.updated = {s: False for s in services}
-    self.recv_time = {s: 0. for s in services}
-    self.recv_frame = {s: 0 for s in services}
-    self.sock = {}
-    self.data = {}
-    self.logMonoTime = {s: 0 for s in services}
-
-    # zero-frequency / on-demand services are always alive and presumed valid; all others must pass checks
-    on_demand = {s: SERVICE_LIST[s].frequency <= 1e-5 for s in services}
-    self.static_freq_services = set(s for s in services if not on_demand[s])
-    self.alive = {s: on_demand[s] for s in services}
-    self.freq_ok = {s: on_demand[s] for s in services}
-    self.valid = {s: on_demand[s] for s in services}
-
-    self.freq_tracker: Dict[str, FrequencyTracker] = {}
-    self.poller = Poller()
-    polled_services = set([poll, ] if poll is not None else services)
-    self.non_polled_services = set(services) - polled_services
-
-    self.ignore_average_freq = [] if ignore_avg_freq is None else ignore_avg_freq
-    self.ignore_alive = [] if ignore_alive is None else ignore_alive
-    self.ignore_valid = [] if ignore_valid is None else ignore_valid
-
-    self.simulation = bool(int(os.getenv("SIMULATION", "0")))
-
-    # if freq and poll aren't specified, assume the max to be conservative
-    assert frequency is None or poll is None, "Do not specify 'frequency' - frequency of the polled service will be used."
-    self.update_freq = frequency or max([SERVICE_LIST[s].frequency for s in polled_services])
-
-    for s in services:
-      p = self.poller if s not in self.non_polled_services else None
-      self.sock[s] = sub_sock(s, poller=p, addr=addr, conflate=True)
-
-      try:
-        data = new_message(s)
-      except capnp.lib.capnp.KjException:
-        data = new_message(s, 0) # lists
-
-      self.data[s] = getattr(data.as_reader(), s)
-      self.freq_tracker[s] = FrequencyTracker(SERVICE_LIST[s].frequency, self.update_freq, s == poll)
-
-    # FrogPilot variables
-    self.addr = addr
-    self.poll = poll
-
-  def __getitem__(self, s: str) -> capnp.lib.capnp._DynamicStructReader:
-    return self.data[s]
-
-  def _check_avg_freq(self, s: str) -> bool:
-    return SERVICE_LIST[s].frequency > 0.99 and (s not in self.ignore_average_freq) and (s not in self.ignore_alive)
-
-  def update(self, timeout: int = 100) -> None:
-    msgs = []
-    for sock in self.poller.poll(timeout):
-      msgs.append(recv_one_or_none(sock))
-
-    # non-blocking receive for non-polled sockets
-    for s in self.non_polled_services:
-      msgs.append(recv_one_or_none(self.sock[s]))
-    self.update_msgs(time.monotonic(), msgs)
-
-  def update_msgs(self, cur_time: float, msgs: List[capnp.lib.capnp._DynamicStructReader]) -> None:
-    self.frame += 1
-    self.updated = dict.fromkeys(self.services, False)
-    for msg in msgs:
-      if msg is None:
-        continue
-
-      s = msg.which()
-      self.seen[s] = True
-      self.updated[s] = True
-
-      self.freq_tracker[s].record_recv_time(cur_time)
-      self.recv_time[s] = cur_time
-      self.recv_frame[s] = self.frame
-      self.data[s] = getattr(msg, s)
-      self.logMonoTime[s] = msg.logMonoTime
-      self.valid[s] = msg.valid
-
-    for s in self.static_freq_services:
-      # alive if delay is within 10x the expected frequency; checks relaxed in simulator
-      self.alive[s] = (cur_time - self.recv_time[s]) < (10. / SERVICE_LIST[s].frequency) or (self.seen[s] and self.simulation)
-      self.freq_ok[s] = self.freq_tracker[s].valid or self.simulation
-
-  def all_alive(self, service_list: Optional[List[str]] = None) -> bool:
-    return all(self.alive[s] for s in (service_list or self.services) if s not in self.ignore_alive)
-
-  def all_freq_ok(self, service_list: Optional[List[str]] = None) -> bool:
-    return all(self.freq_ok[s] for s in (service_list or self.services) if self._check_avg_freq(s))
-
-  def all_valid(self, service_list: Optional[List[str]] = None) -> bool:
-    return all(self.valid[s] for s in (service_list or self.services) if s not in self.ignore_valid)
-
-  def all_checks(self, service_list: Optional[List[str]] = None) -> bool:
-    return self.all_alive(service_list) and self.all_freq_ok(service_list) and self.all_valid(service_list)
-
-  # FrogPilot variables
-  def extend(self, new_services: List[str]):
-    return SubMaster(
-      self.services + new_services,
-      poll=self.poll,
-      ignore_alive=self.ignore_alive,
-      ignore_avg_freq=self.ignore_average_freq,
-      ignore_valid=self.ignore_valid,
-      addr=self.addr,
-      frequency=None if self.poll is not None else self.update_freq,
-    )
-
-
-class PubMaster:
-  def __init__(self, services: List[str]):
-    self.sock = {}
-    for s in services:
-      self.sock[s] = pub_sock(s)
-
-  def send(self, s: str, dat: Union[bytes, capnp.lib.capnp._DynamicStructBuilder]) -> None:
-    if not isinstance(dat, bytes):
-      dat = dat.to_bytes()
-    self.sock[s].send(dat)
-
-  def wait_for_readers_to_update(self, s: str, timeout: int, dt: float = 0.05) -> bool:
-    for _ in range(int(timeout*(1./dt))):
-      if self.sock[s].all_readers_updated():
-        return True
-      time.sleep(dt)
-    return False
-
-  def all_readers_updated(self, s: str) -> bool:
-    return self.sock[s].all_readers_updated()  # type: ignore
-
-  # FrogPilot variables
-  def extend(self, new_services: List[str]):
-    for service in new_services:
-      if service not in self.sock:
-        self.sock[service] = pub_sock(service)
-    return self

cereal/messaging/bridge.cc

@@ -1,71 +0,0 @@
-#include <cassert>
-
-#include "cereal/messaging/msgq_to_zmq.h"
-#include "cereal/services.h"
-#include "common/util.h"
-
-ExitHandler do_exit;
-
-static std::vector<std::string> get_services(const std::string &whitelist_str, bool zmq_to_msgq) {
-  std::vector<std::string> service_list;
-  for (const auto& it : services) {
-    std::string name = it.second.name;
-    bool in_whitelist = whitelist_str.find(name) != std::string::npos;
-    if (zmq_to_msgq && !in_whitelist) {
-      continue;
-    }
-    service_list.push_back(name);
-  }
-  return service_list;
-}
-
-void msgq_to_zmq(const std::vector<std::string> &endpoints, const std::string &ip) {
-  MsgqToZmq bridge;
-  bridge.run(endpoints, ip);
-}
-
-void zmq_to_msgq(const std::vector<std::string> &endpoints, const std::string &ip) {
-  auto poller = std::make_unique<ZMQPoller>();
-  auto pub_context = std::make_unique<MSGQContext>();
-  auto sub_context = std::make_unique<ZMQContext>();
-  std::map<SubSocket *, PubSocket *> sub2pub;
-
-  for (auto endpoint : endpoints) {
-    auto pub_sock = new MSGQPubSocket();
-    auto sub_sock = new ZMQSubSocket();
-    pub_sock->connect(pub_context.get(), endpoint);
-    sub_sock->connect(sub_context.get(), endpoint, ip, false);
-
-    poller->registerSocket(sub_sock);
-    sub2pub[sub_sock] = pub_sock;
-  }
-
-  while (!do_exit) {
-    for (auto sub_sock : poller->poll(100)) {
-      std::unique_ptr<Message> msg(sub_sock->receive(true));
-      if (msg) {
-        sub2pub[sub_sock]->sendMessage(msg.get());
-      }
-    }
-  }
-
-  // Clean up allocated sockets
-  for (auto &[sub_sock, pub_sock] : sub2pub) {
-    delete sub_sock;
-    delete pub_sock;
-  }
-}
-
-int main(int argc, char **argv) {
-  bool is_zmq_to_msgq = argc > 2;
-  std::string ip = is_zmq_to_msgq ? argv[1] : "127.0.0.1";
-  std::string whitelist_str = is_zmq_to_msgq ? std::string(argv[2]) : "";
-  std::vector<std::string> endpoints = get_services(whitelist_str, is_zmq_to_msgq);
-
-  if (is_zmq_to_msgq) {
-    zmq_to_msgq(endpoints, ip);
-  } else {
-    msgq_to_zmq(endpoints, ip);
-  }
-  return 0;
-}

cereal/messaging/messaging.h

@@ -1,102 +0,0 @@
-#pragma once
-
-#include <cstddef>
-#include <map>
-#include <string>
-#include <vector>
-#include <utility>
-
-#include <capnp/serialize.h>
-
-#include "cereal/gen/cpp/log.capnp.h"
-#include "common/timing.h"
-#include "msgq/ipc.h"
-
-class SubMaster {
-public:
-  SubMaster(const std::vector<const char *> &service_list, const std::vector<const char *> &poll = {},
-            const char *address = nullptr, const std::vector<const char *> &ignore_alive = {});
-  void update(int timeout = 1000);
-  void update_msgs(uint64_t current_time, const std::vector<std::pair<std::string, cereal::Event::Reader>> &messages);
-  inline bool allAlive(const std::vector<const char *> &service_list = {}) { return all_(service_list, false, true); }
-  inline bool allValid(const std::vector<const char *> &service_list = {}) { return all_(service_list, true, false); }
-  inline bool allAliveAndValid(const std::vector<const char *> &service_list = {}) { return all_(service_list, true, true); }
-  void drain();
-  ~SubMaster();
-
-  uint64_t frame = 0;
-  bool updated(const char *name) const;
-  bool alive(const char *name) const;
-  bool valid(const char *name) const;
-  uint64_t rcv_frame(const char *name) const;
-  uint64_t rcv_time(const char *name) const;
-  cereal::Event::Reader &operator[](const char *name) const;
-
-private:
-  bool all_(const std::vector<const char *> &service_list, bool valid, bool alive);
-  Poller *poller_ = nullptr;
-  struct SubMessage;
-  std::map<SubSocket *, SubMessage *> messages_;
-  std::map<std::string, SubMessage *> services_;
-};
-
-class MessageBuilder : public capnp::MallocMessageBuilder {
-public:
-  MessageBuilder() = default;
-
-  cereal::Event::Builder initEvent(bool valid = true) {
-    cereal::Event::Builder event = initRoot<cereal::Event>();
-    event.setLogMonoTime(nanos_since_boot());
-    event.setValid(valid);
-    return event;
-  }
-
-  kj::ArrayPtr<capnp::byte> toBytes() {
-    heapArray_ = capnp::messageToFlatArray(*this);
-    return heapArray_.asBytes();
-  }
-
-  size_t getSerializedSize() {
-    return capnp::computeSerializedSizeInWords(*this) * sizeof(capnp::word);
-  }
-
-  int serializeToBuffer(unsigned char *buffer, size_t buffer_size) {
-    size_t serialized_size = getSerializedSize();
-    if (serialized_size > buffer_size) { return -1; }
-    kj::ArrayOutputStream out(kj::ArrayPtr<capnp::byte>(buffer, buffer_size));
-    capnp::writeMessage(out, *this);
-    return serialized_size;
-  }
-
-private:
-  kj::Array<capnp::word> heapArray_;
-};
-
-class PubMaster {
-public:
-  PubMaster(const std::vector<const char *> &service_list);
-  inline int send(const char *name, capnp::byte *data, size_t size) { return sockets_.at(name)->send((char *)data, size); }
-  int send(const char *name, MessageBuilder &msg);
-  ~PubMaster();
-
-private:
-  std::map<std::string, PubSocket *> sockets_;
-};
-
-class AlignedBuffer {
-public:
-  kj::ArrayPtr<const capnp::word> align(const char *data, const size_t size) {
-    words_size = size / sizeof(capnp::word) + 1;
-    if (aligned_buf.size() < words_size) {
-      aligned_buf = kj::heapArray<capnp::word>(words_size < 512 ? 512 : words_size);
-    }
-    memcpy(aligned_buf.begin(), data, size);
-    return aligned_buf.slice(0, words_size);
-  }
-  inline kj::ArrayPtr<const capnp::word> align(Message *m) {
-    return align(m->getData(), m->getSize());
-  }
-private:
-  kj::Array<capnp::word> aligned_buf;
-  size_t words_size;
-};

cereal/messaging/msgq_to_zmq.cc

@@ -1,144 +0,0 @@
-#include "cereal/messaging/msgq_to_zmq.h"
-
-#include <cassert>
-
-#include "common/util.h"
-
-extern ExitHandler do_exit;
-
-// Max messages to process per socket per poll
-constexpr int MAX_MESSAGES_PER_SOCKET = 50;
-
-static std::string recv_zmq_msg(void *sock) {
-  zmq_msg_t msg;
-  zmq_msg_init(&msg);
-  std::string ret;
-  if (zmq_msg_recv(&msg, sock, 0) > 0) {
-    ret.assign((char *)zmq_msg_data(&msg), zmq_msg_size(&msg));
-  }
-  zmq_msg_close(&msg);
-  return ret;
-}
-
-void MsgqToZmq::run(const std::vector<std::string> &endpoints, const std::string &ip) {
-  zmq_context = std::make_unique<ZMQContext>();
-  msgq_context = std::make_unique<MSGQContext>();
-
-  // Create ZMQPubSockets for each endpoint
-  for (const auto &endpoint : endpoints) {
-    auto &socket_pair = socket_pairs.emplace_back();
-    socket_pair.endpoint = endpoint;
-    socket_pair.pub_sock = std::make_unique<ZMQPubSocket>();
-    int ret = socket_pair.pub_sock->connect(zmq_context.get(), endpoint);
-    if (ret != 0) {
-      printf("Failed to create ZMQ publisher for [%s]: %s\n", endpoint.c_str(), zmq_strerror(zmq_errno()));
-      return;
-    }
-  }
-
-  // Start ZMQ monitoring thread to monitor socket events
-  std::thread thread(&MsgqToZmq::zmqMonitorThread, this);
-
-  // Main loop for processing messages
-  while (!do_exit) {
-    {
-      std::unique_lock lk(mutex);
-      cv.wait(lk, [this]() { return do_exit || !sub2pub.empty(); });
-      if (do_exit) break;
-
-      for (auto sub_sock : msgq_poller->poll(100)) {
-        // Process messages for each socket
-        ZMQPubSocket *pub_sock = sub2pub.at(sub_sock);
-        for (int i = 0; i < MAX_MESSAGES_PER_SOCKET; ++i) {
-          auto msg = std::unique_ptr<Message>(sub_sock->receive(true));
-          if (!msg) break;
-
-          while (pub_sock->sendMessage(msg.get()) == -1) {
-            if (errno != EINTR) break;
-          }
-        }
-      }
-    }
-    util::sleep_for(1);  // Give zmqMonitorThread a chance to acquire the mutex
-  }
-
-  thread.join();
-}
-
-void MsgqToZmq::zmqMonitorThread() {
-  std::vector<zmq_pollitem_t> pollitems;
-
-  // Set up ZMQ monitor for each pub socket
-  for (int i = 0; i < socket_pairs.size(); ++i) {
-    std::string addr = "inproc://op-bridge-monitor-" + std::to_string(i);
-    zmq_socket_monitor(socket_pairs[i].pub_sock->sock, addr.c_str(), ZMQ_EVENT_ACCEPTED | ZMQ_EVENT_DISCONNECTED);
-
-    void *monitor_socket = zmq_socket(zmq_context->getRawContext(), ZMQ_PAIR);
-    zmq_connect(monitor_socket, addr.c_str());
-    pollitems.emplace_back(zmq_pollitem_t{.socket = monitor_socket, .events = ZMQ_POLLIN});
-  }
-
-  while (!do_exit) {
-    int ret = zmq_poll(pollitems.data(), pollitems.size(), 1000);
-    if (ret < 0) {
-      if (errno == EINTR) {
-        // Due to frequent EINTR signals from msgq, introduce a brief delay (200 ms)
-        // to reduce CPU usage during retry attempts.
-        util::sleep_for(200);
-      }
-      continue;
-    }
-
-    for (int i = 0; i < pollitems.size(); ++i) {
-      if (pollitems[i].revents & ZMQ_POLLIN) {
-        // First frame in message contains event number and value
-        std::string frame = recv_zmq_msg(pollitems[i].socket);
-        if (frame.empty()) continue;
-
-        uint16_t event_type = *(uint16_t *)(frame.data());
-
-        // Second frame in message contains event address
-        frame = recv_zmq_msg(pollitems[i].socket);
-        if (frame.empty()) continue;
-
-        std::unique_lock lk(mutex);
-        auto &pair = socket_pairs[i];
-        if (event_type & ZMQ_EVENT_ACCEPTED) {
-          printf("socket [%s] connected\n", pair.endpoint.c_str());
-          if (++pair.connected_clients == 1) {
-            // Create new MSGQ subscriber socket and map to ZMQ publisher
-            pair.sub_sock = std::make_unique<MSGQSubSocket>();
-            pair.sub_sock->connect(msgq_context.get(), pair.endpoint, "127.0.0.1");
-            sub2pub[pair.sub_sock.get()] = pair.pub_sock.get();
-            registerSockets();
-          }
-        } else if (event_type & ZMQ_EVENT_DISCONNECTED) {
-          printf("socket [%s] disconnected\n", pair.endpoint.c_str());
-          if (pair.connected_clients == 0 || --pair.connected_clients == 0) {
-            // Remove MSGQ subscriber socket from mapping and reset it
-            sub2pub.erase(pair.sub_sock.get());
-            pair.sub_sock.reset(nullptr);
-            registerSockets();
-          }
-        }
-        cv.notify_one();
-      }
-    }
-  }
-
-  // Clean up monitor sockets
-  for (int i = 0; i < pollitems.size(); ++i) {
-    zmq_socket_monitor(socket_pairs[i].pub_sock->sock, nullptr, 0);
-    zmq_close(pollitems[i].socket);
-  }
-  cv.notify_one();
-}
-
-void MsgqToZmq::registerSockets() {
-  msgq_poller = std::make_unique<MSGQPoller>();
-  for (const auto &socket_pair : socket_pairs) {
-    if (socket_pair.sub_sock) {
-      msgq_poller->registerSocket(socket_pair.sub_sock.get());
-    }
-  }
-}

cereal/messaging/msgq_to_zmq.h

@@ -1,37 +0,0 @@
-#pragma once
-
-#include <condition_variable>
-#include <map>
-#include <memory>
-#include <mutex>
-#include <string>
-#include <vector>
-
-#define private public
-#include "msgq/impl_msgq.h"
-#include "msgq/impl_zmq.h"
-
-class MsgqToZmq {
-public:
-  MsgqToZmq() {}
-  void run(const std::vector<std::string> &endpoints, const std::string &ip);
-
-protected:
-  void registerSockets();
-  void zmqMonitorThread();
-
-  struct SocketPair {
-    std::string endpoint;
-    std::unique_ptr<ZMQPubSocket> pub_sock;
-    std::unique_ptr<MSGQSubSocket> sub_sock;
-    int connected_clients = 0;
-  };
-
-  std::unique_ptr<MSGQContext> msgq_context;
-  std::unique_ptr<ZMQContext> zmq_context;
-  std::mutex mutex;
-  std::condition_variable cv;
-  std::unique_ptr<MSGQPoller> msgq_poller;
-  std::map<SubSocket *, ZMQPubSocket *> sub2pub;
-  std::vector<SocketPair> socket_pairs;
-};

cereal/messaging/socketmaster.cc

@@ -1,204 +0,0 @@
-#include <assert.h>
-#include <stdlib.h>
-#include <string>
-#include <mutex>
-
-#include "cereal/services.h"
-#include "cereal/messaging/messaging.h"
-
-const bool SIMULATION = (getenv("SIMULATION") != nullptr) && (std::string(getenv("SIMULATION")) == "1");
-
-static inline bool inList(const std::vector<const char *> &list, const char *value) {
-  for (auto &v : list) {
-    if (strcmp(value, v) == 0) return true;
-  }
-  return false;
-}
-
-class MessageContext {
-public:
-  MessageContext() : ctx_(nullptr) {}
-  ~MessageContext() { delete ctx_; }
-  inline Context *context() {
-    std::call_once(init_flag, [=]() { ctx_ = Context::create(); });
-    return ctx_;
-  }
-private:
-  Context *ctx_;
-  std::once_flag init_flag;
-};
-
-MessageContext message_context;
-
-struct SubMaster::SubMessage {
-  std::string name;
-  SubSocket *socket = nullptr;
-  float freq = 0.0f;
-  bool updated = false, alive = false, valid = false, ignore_alive;
-  uint64_t rcv_time = 0, rcv_frame = 0;
-  void *allocated_msg_reader = nullptr;
-  bool is_polled = false;
-  capnp::FlatArrayMessageReader *msg_reader = nullptr;
-  AlignedBuffer aligned_buf;
-  cereal::Event::Reader event;
-};
-
-SubMaster::SubMaster(const std::vector<const char *> &service_list, const std::vector<const char *> &poll,
-                     const char *address, const std::vector<const char *> &ignore_alive) {
-  poller_ = Poller::create();
-  for (auto name : service_list) {
-    assert(services.count(std::string(name)) > 0);
-
-    service serv = services.at(std::string(name));
-    SubSocket *socket = SubSocket::create(message_context.context(), name, address ? address : "127.0.0.1", true, true, serv.queue_size);
-    assert(socket != 0);
-    bool is_polled = inList(poll, name) || poll.empty();
-    if (is_polled) poller_->registerSocket(socket);
-    SubMessage *m = new SubMessage{
-      .name = name,
-      .socket = socket,
-      .freq = serv.frequency,
-      .ignore_alive = inList(ignore_alive, name),
-      .allocated_msg_reader = malloc(sizeof(capnp::FlatArrayMessageReader)),
-      .is_polled = is_polled};
-    m->msg_reader = new (m->allocated_msg_reader) capnp::FlatArrayMessageReader({});
-    messages_[socket] = m;
-    services_[name] = m;
-  }
-}
-
-void SubMaster::update(int timeout) {
-  for (auto &kv : messages_) kv.second->updated = false;
-
-  auto sockets = poller_->poll(timeout);
-
-  // add non-polled sockets for non-blocking receive
-  for (auto &kv : messages_) {
-    SubMessage *m = kv.second;
-    SubSocket *s = kv.first;
-    if (!m->is_polled) sockets.push_back(s);
-  }
-
-  uint64_t current_time = nanos_since_boot();
-
-  std::vector<std::pair<std::string, cereal::Event::Reader>> messages;
-
-  for (auto s : sockets) {
-    Message *msg = s->receive(true);
-    if (msg == nullptr) continue;
-
-    SubMessage *m = messages_.at(s);
-
-    m->msg_reader->~FlatArrayMessageReader();
-    capnp::ReaderOptions options;
-    options.traversalLimitInWords = kj::maxValue; // Don't limit
-    m->msg_reader = new (m->allocated_msg_reader) capnp::FlatArrayMessageReader(m->aligned_buf.align(msg), options);
-    delete msg;
-    messages.push_back({m->name, m->msg_reader->getRoot<cereal::Event>()});
-  }
-
-  update_msgs(current_time, messages);
-}
-
-void SubMaster::update_msgs(uint64_t current_time, const std::vector<std::pair<std::string, cereal::Event::Reader>> &messages){
-  if (++frame == UINT64_MAX) frame = 1;
-
-  for (auto &kv : messages) {
-    auto m_find = services_.find(kv.first);
-    if (m_find == services_.end()){
-      continue;
-    }
-    SubMessage *m = m_find->second;
-    m->event = kv.second;
-    m->updated = true;
-    m->rcv_time = current_time;
-    m->rcv_frame = frame;
-    m->valid = m->event.getValid();
-    if (SIMULATION) m->alive = true;
-  }
-
-  if (!SIMULATION) {
-    for (auto &kv : messages_) {
-      SubMessage *m = kv.second;
-      m->alive = (m->freq <= (1e-5) || ((current_time - m->rcv_time) * (1e-9)) < (10.0 / m->freq));
-    }
-  }
-}
-
-bool SubMaster::all_(const std::vector<const char *> &service_list, bool valid, bool alive) {
-  int found = 0;
-  for (auto &kv : messages_) {
-    SubMessage *m = kv.second;
-    if (service_list.size() == 0 || inList(service_list, m->name.c_str())) {
-      found += (!valid || m->valid) && (!alive || (m->alive || m->ignore_alive));
-    }
-  }
-  return service_list.size() == 0 ? found == messages_.size() : found == service_list.size();
-}
-
-void SubMaster::drain() {
-  while (true) {
-    auto polls = poller_->poll(0);
-    if (polls.size() == 0)
-      break;
-
-    for (auto sock : polls) {
-      Message *msg = sock->receive(true);
-      delete msg;
-    }
-  }
-}
-
-bool SubMaster::updated(const char *name) const {
-  return services_.at(name)->updated;
-}
-
-bool SubMaster::alive(const char *name) const {
-  return services_.at(name)->alive;
-}
-
-bool SubMaster::valid(const char *name) const {
-  return services_.at(name)->valid;
-}
-
-uint64_t SubMaster::rcv_frame(const char *name) const {
-  return services_.at(name)->rcv_frame;
-}
-
-uint64_t SubMaster::rcv_time(const char *name) const {
-  return services_.at(name)->rcv_time;
-}
-
-cereal::Event::Reader &SubMaster::operator[](const char *name) const {
-  return services_.at(name)->event;
-}
-
-SubMaster::~SubMaster() {
-  delete poller_;
-  for (auto &kv : messages_) {
-    SubMessage *m = kv.second;
-    m->msg_reader->~FlatArrayMessageReader();
-    free(m->allocated_msg_reader);
-    delete m->socket;
-    delete m;
-  }
-}
-
-PubMaster::PubMaster(const std::vector<const char *> &service_list) {
-  for (auto name : service_list) {
-    assert(services.count(name) > 0);
-    service serv = services.at(std::string(name));
-    PubSocket *socket = PubSocket::create(message_context.context(), name, true, serv.queue_size);
-    assert(socket);
-    sockets_[name] = socket;
-  }
-}
-
-int PubMaster::send(const char *name, MessageBuilder &msg) {
-  auto bytes = msg.toBytes();
-  return send(name, bytes.begin(), bytes.size());
-}
-
-PubMaster::~PubMaster() {
-  for (auto s : sockets_) delete s.second;
-}

cereal/messaging/tests/test_messaging.py

@@ -1,185 +0,0 @@
-import os
-import capnp
-import multiprocessing
-import numbers
-import random
-import threading
-import time
-from parameterized import parameterized
-import pytest
-
-from cereal import log, car
-import cereal.messaging as messaging
-from cereal.services import SERVICE_LIST
-
-events = [evt for evt in log.Event.schema.union_fields if evt in SERVICE_LIST.keys()]
-
-def random_sock():
-  return random.choice(events)
-
-def random_socks(num_socks=10):
-  return list({random_sock() for _ in range(num_socks)})
-
-def random_bytes(length=1000):
-  return bytes([random.randrange(0xFF) for _ in range(length)])
-
-def zmq_sleep(t=1):
-  if "ZMQ" in os.environ:
-    time.sleep(t)
-
-
-# TODO: this should take any capnp struct and returrn a msg with random populated data
-def random_carstate():
-  fields = ["vEgo", "aEgo", "brake", "steeringAngleDeg"]
-  msg = messaging.new_message("carState")
-  cs = msg.carState
-  for f in fields:
-    setattr(cs, f, random.random() * 10)
-  return msg
-
-# TODO: this should compare any capnp structs
-def assert_carstate(cs1, cs2):
-  for f in car.CarState.schema.non_union_fields:
-    # TODO: check all types
-    val1, val2 = getattr(cs1, f), getattr(cs2, f)
-    if isinstance(val1, numbers.Number):
-      assert val1 == val2, f"{f}: sent '{val1}' vs recvd '{val2}'"
-
-def delayed_send(delay, sock, dat):
-  def send_func():
-    sock.send(dat)
-  threading.Timer(delay, send_func).start()
-
-
-class TestMessaging:
-  def setUp(self):
-    # TODO: ZMQ tests are too slow; all sleeps will need to be
-    # replaced with logic to block on the necessary condition
-    if "ZMQ" in os.environ:
-      pytest.skip()
-
-    # ZMQ pub socket takes too long to die
-    # sleep to prevent multiple publishers error between tests
-    zmq_sleep()
-
-  @parameterized.expand(events)
-  def test_new_message(self, evt):
-    try:
-      msg = messaging.new_message(evt)
-    except capnp.lib.capnp.KjException:
-      msg = messaging.new_message(evt, random.randrange(200))
-    assert (time.monotonic() - msg.logMonoTime) < 0.1
-    assert not msg.valid
-    assert evt == msg.which()
-
-  @parameterized.expand(events)
-  def test_pub_sock(self, evt):
-    messaging.pub_sock(evt)
-
-  @parameterized.expand(events)
-  def test_sub_sock(self, evt):
-    messaging.sub_sock(evt)
-
-  @parameterized.expand([
-    (messaging.drain_sock, capnp._DynamicStructReader),
-    (messaging.drain_sock_raw, bytes),
-  ])
-  def test_drain_sock(self, func, expected_type):
-    sock = "carState"
-    pub_sock = messaging.pub_sock(sock)
-    sub_sock = messaging.sub_sock(sock, timeout=1000)
-    zmq_sleep()
-
-    # no wait and no msgs in queue
-    msgs = func(sub_sock)
-    assert isinstance(msgs, list)
-    assert len(msgs) == 0
-
-    # no wait but msgs are queued up
-    num_msgs = random.randrange(3, 10)
-    for _ in range(num_msgs):
-      pub_sock.send(messaging.new_message(sock).to_bytes())
-    time.sleep(0.1)
-    msgs = func(sub_sock)
-    assert isinstance(msgs, list)
-    assert all(isinstance(msg, expected_type) for msg in msgs)
-    assert len(msgs) == num_msgs
-
-  def test_recv_sock(self):
-    sock = "carState"
-    pub_sock = messaging.pub_sock(sock)
-    sub_sock = messaging.sub_sock(sock, timeout=100)
-    zmq_sleep()
-
-    # no wait and no msg in queue, socket should timeout
-    recvd = messaging.recv_sock(sub_sock)
-    assert recvd is None
-
-    # no wait and one msg in queue
-    msg = random_carstate()
-    pub_sock.send(msg.to_bytes())
-    time.sleep(0.01)
-    recvd = messaging.recv_sock(sub_sock)
-    assert isinstance(recvd, capnp._DynamicStructReader)
-    # https://github.com/python/mypy/issues/13038
-    assert_carstate(msg.carState, recvd.carState)
-
-  def test_recv_one(self):
-    sock = "carState"
-    pub_sock = messaging.pub_sock(sock)
-    sub_sock = messaging.sub_sock(sock, timeout=1000)
-    zmq_sleep()
-
-    # no msg in queue, socket should timeout
-    recvd = messaging.recv_one(sub_sock)
-    assert recvd is None
-
-    # one msg in queue
-    msg = random_carstate()
-    pub_sock.send(msg.to_bytes())
-    recvd = messaging.recv_one(sub_sock)
-    assert isinstance(recvd, capnp._DynamicStructReader)
-    assert_carstate(msg.carState, recvd.carState)
-
-  @pytest.mark.xfail(condition="ZMQ" in os.environ, reason='ZMQ detected')
-  def test_recv_one_or_none(self):
-    sock = "carState"
-    pub_sock = messaging.pub_sock(sock)
-    sub_sock = messaging.sub_sock(sock)
-    zmq_sleep()
-
-    # no msg in queue, socket shouldn't block
-    recvd = messaging.recv_one_or_none(sub_sock)
-    assert recvd is None
-
-    # one msg in queue
-    msg = random_carstate()
-    pub_sock.send(msg.to_bytes())
-    recvd = messaging.recv_one_or_none(sub_sock)
-    assert isinstance(recvd, capnp._DynamicStructReader)
-    assert_carstate(msg.carState, recvd.carState)
-
-  def test_recv_one_retry(self):
-    sock = "carState"
-    sock_timeout = 0.1
-    pub_sock = messaging.pub_sock(sock)
-    sub_sock = messaging.sub_sock(sock, timeout=round(sock_timeout*1000))
-    zmq_sleep()
-
-    # this test doesn't work with ZMQ since multiprocessing interrupts it
-    if "ZMQ" not in os.environ:
-      # wait 5 socket timeouts and make sure it's still retrying
-      p = multiprocessing.Process(target=messaging.recv_one_retry, args=(sub_sock,))
-      p.start()
-      time.sleep(sock_timeout*5)
-      assert p.is_alive()
-      p.terminate()
-
-    # wait 5 socket timeouts before sending
-    msg = random_carstate()
-    start_time = time.monotonic()
-    delayed_send(sock_timeout*5, pub_sock, msg.to_bytes())
-    recvd = messaging.recv_one_retry(sub_sock)
-    assert (time.monotonic() - start_time) >= sock_timeout*5
-    assert isinstance(recvd, capnp._DynamicStructReader)
-    assert_carstate(msg.carState, recvd.carState)

cereal/messaging/tests/test_pub_sub_master.py

@@ -1,160 +0,0 @@
-import random
-import time
-from typing import Sized, cast
-
-import cereal.messaging as messaging
-from cereal.messaging.tests.test_messaging import events, random_sock, random_socks, \
-                                                  random_bytes, random_carstate, assert_carstate, \
-                                                  zmq_sleep
-from cereal.services import SERVICE_LIST
-
-
-class TestSubMaster:
-
-  def setup_method(self):
-    # ZMQ pub socket takes too long to die
-    # sleep to prevent multiple publishers error between tests
-    zmq_sleep(3)
-
-  def test_init(self):
-    sm = messaging.SubMaster(events)
-    for p in [sm.updated, sm.recv_time, sm.recv_frame, sm.alive,
-              sm.sock, sm.data, sm.logMonoTime, sm.valid]:
-      assert len(cast(Sized, p)) == len(events)
-
-  def test_init_state(self):
-    socks = random_socks()
-    sm = messaging.SubMaster(socks)
-    assert sm.frame == -1
-    assert not any(sm.updated.values())
-    assert not any(sm.seen.values())
-    on_demand = {s: SERVICE_LIST[s].frequency <= 1e-5 for s in sm.services}
-    assert all(sm.alive[s] == sm.valid[s] == sm.freq_ok[s] == on_demand[s] for s in sm.services)
-    assert all(t == 0. for t in sm.recv_time.values())
-    assert all(f == 0 for f in sm.recv_frame.values())
-    assert all(t == 0 for t in sm.logMonoTime.values())
-
-    for p in [sm.updated, sm.recv_time, sm.recv_frame, sm.alive,
-              sm.sock, sm.data, sm.logMonoTime, sm.valid]:
-      assert len(cast(Sized, p)) == len(socks)
-
-  def test_getitem(self):
-    sock = "carState"
-    pub_sock = messaging.pub_sock(sock)
-    sm = messaging.SubMaster([sock,])
-    zmq_sleep()
-
-    msg = random_carstate()
-    pub_sock.send(msg.to_bytes())
-    sm.update(1000)
-    assert_carstate(msg.carState, sm[sock])
-
-  # TODO: break this test up to individually test SubMaster.update and SubMaster.update_msgs
-  def test_update(self):
-    sock = "carState"
-    pub_sock = messaging.pub_sock(sock)
-    sm = messaging.SubMaster([sock,])
-    zmq_sleep()
-
-    for i in range(10):
-      msg = messaging.new_message(sock)
-      pub_sock.send(msg.to_bytes())
-      sm.update(1000)
-      assert sm.frame == i
-      assert all(sm.updated.values())
-
-  def test_update_timeout(self):
-    sock = random_sock()
-    sm = messaging.SubMaster([sock,])
-    timeout = random.randrange(1000, 3000)
-    start_time = time.monotonic()
-    sm.update(timeout)
-    t = time.monotonic() - start_time
-    assert t >= timeout/1000.
-    assert t < 3
-    assert not any(sm.updated.values())
-
-  def test_avg_frequency_checks(self):
-    for poll in (True, False):
-      sm = messaging.SubMaster(["modelV2", "carParams", "carState", "cameraOdometry", "liveCalibration"],
-                               poll=("modelV2" if poll else None),
-                               frequency=(20. if not poll else None))
-
-      checks = {
-        "carState": (20, 20),
-        "modelV2": (20, 20 if poll else 10),
-        "cameraOdometry": (20, 10),
-        "liveCalibration": (4, 4),
-        "carParams": (None, None),
-        "userBookmark": (None, None),
-      }
-
-      for service, (max_freq, min_freq) in checks.items():
-        if max_freq is not None:
-          assert sm._check_avg_freq(service)
-          assert sm.freq_tracker[service].max_freq == max_freq*1.2
-          assert sm.freq_tracker[service].min_freq == min_freq*0.8
-        else:
-          assert not sm._check_avg_freq(service)
-
-  def test_alive(self):
-    pass
-
-  def test_ignore_alive(self):
-    pass
-
-  def test_valid(self):
-    pass
-
-  # SubMaster should always conflate
-  def test_conflate(self):
-    sock = "carState"
-    pub_sock = messaging.pub_sock(sock)
-    sm = messaging.SubMaster([sock,])
-
-    n = 10
-    for i in range(n+1):
-      msg = messaging.new_message(sock)
-      msg.carState.vEgo = i
-      pub_sock.send(msg.to_bytes())
-      time.sleep(0.01)
-    sm.update(1000)
-    assert sm[sock].vEgo == n
-
-
-class TestPubMaster:
-
-  def setup_method(self):
-    # ZMQ pub socket takes too long to die
-    # sleep to prevent multiple publishers error between tests
-    zmq_sleep(3)
-
-  def test_init(self):
-    messaging.PubMaster(events)
-
-  def test_send(self):
-    socks = random_socks()
-    pm = messaging.PubMaster(socks)
-    sub_socks = {s: messaging.sub_sock(s, conflate=True, timeout=1000) for s in socks}
-    zmq_sleep()
-
-    # PubMaster accepts either a capnp msg builder or bytes
-    for capnp in [True, False]:
-      for i in range(100):
-        sock = socks[i % len(socks)]
-
-        if capnp:
-          try:
-            msg = messaging.new_message(sock)
-          except Exception:
-            msg = messaging.new_message(sock, random.randrange(50))
-        else:
-          msg = random_bytes()
-
-        pm.send(sock, msg)
-        recvd = sub_socks[sock].receive()
-
-        if capnp:
-          msg.clear_write_flag()
-          msg = msg.to_bytes()
-        assert msg == recvd, i

cereal/messaging/tests/test_services.py

@@ -1,21 +0,0 @@
-import os
-import tempfile
-from typing import Dict
-from parameterized import parameterized
-
-import cereal.services as services
-from cereal.services import SERVICE_LIST
-
-
-class TestServices:
-
-  @parameterized.expand(SERVICE_LIST.keys())
-  def test_services(self, s):
-    service = SERVICE_LIST[s]
-    assert service.frequency <= 104
-    assert service.decimation != 0
-
-  def test_generated_header(self):
-    with tempfile.NamedTemporaryFile(suffix=".h") as f:
-      ret = os.system(f"python3 {services.__file__} > {f.name} && clang++ {f.name} -std=c++11")
-      assert ret == 0, "generated services header is not valid C"

cereal/services.h

@@ -1,100 +0,0 @@
-/* THIS IS AN AUTOGENERATED FILE, PLEASE EDIT services.py */
-#ifndef __SERVICES_H
-#define __SERVICES_H
-#include <map>
-#include <string>
-struct service { std::string name; bool should_log; float frequency; int decimation; size_t queue_size; };
-static std::map<std::string, service> services = {
-  { "gyroscope", {"gyroscope", true, 104.000000, 104, 256000}},
-  { "accelerometer", {"accelerometer", true, 104.000000, 104, 256000}},
-  { "magnetometer", {"magnetometer", true, 25.000000, -1, 256000}},
-  { "lightSensor", {"lightSensor", true, 100.000000, 100, 256000}},
-  { "temperatureSensor", {"temperatureSensor", true, 2.000000, 200, 256000}},
-  { "gpsNMEA", {"gpsNMEA", true, 9.000000, -1, 256000}},
-  { "deviceState", {"deviceState", true, 2.000000, 1, 256000}},
-  { "touch", {"touch", true, 20.000000, 1, 256000}},
-  { "can", {"can", true, 100.000000, 2053, 10485760}},
-  { "controlsState", {"controlsState", true, 100.000000, 10, 2097152}},
-  { "selfdriveState", {"selfdriveState", true, 100.000000, 10, 256000}},
-  { "pandaStates", {"pandaStates", true, 10.000000, 1, 256000}},
-  { "peripheralState", {"peripheralState", true, 2.000000, 1, 256000}},
-  { "radarState", {"radarState", true, 20.000000, 5, 256000}},
-  { "roadEncodeIdx", {"roadEncodeIdx", false, 20.000000, 1, 256000}},
-  { "liveTracks", {"liveTracks", true, 20.000000, -1, 256000}},
-  { "sendcan", {"sendcan", true, 100.000000, 139, 2097152}},
-  { "logMessage", {"logMessage", true, 0.000000, -1, 256000}},
-  { "errorLogMessage", {"errorLogMessage", true, 0.000000, 1, 256000}},
-  { "liveCalibration", {"liveCalibration", true, 4.000000, 4, 256000}},
-  { "liveTorqueParameters", {"liveTorqueParameters", true, 4.000000, 1, 256000}},
-  { "liveDelay", {"liveDelay", true, 4.000000, 1, 256000}},
-  { "androidLog", {"androidLog", true, 0.000000, -1, 256000}},
-  { "carState", {"carState", true, 100.000000, 10, 256000}},
-  { "carControl", {"carControl", true, 100.000000, 10, 256000}},
-  { "carOutput", {"carOutput", true, 100.000000, 10, 256000}},
-  { "longitudinalPlan", {"longitudinalPlan", true, 20.000000, 10, 256000}},
-  { "driverAssistance", {"driverAssistance", true, 20.000000, 20, 256000}},
-  { "procLog", {"procLog", true, 0.500000, 15, 10485760}},
-  { "gpsLocationExternal", {"gpsLocationExternal", true, 10.000000, 10, 256000}},
-  { "gpsLocation", {"gpsLocation", true, 1.000000, 1, 256000}},
-  { "ubloxGnss", {"ubloxGnss", true, 10.000000, -1, 256000}},
-  { "qcomGnss", {"qcomGnss", true, 2.000000, -1, 256000}},
-  { "gnssMeasurements", {"gnssMeasurements", true, 10.000000, 10, 256000}},
-  { "clocks", {"clocks", true, 0.100000, 1, 256000}},
-  { "ubloxRaw", {"ubloxRaw", true, 20.000000, -1, 256000}},
-  { "livePose", {"livePose", true, 20.000000, 4, 256000}},
-  { "liveParameters", {"liveParameters", true, 20.000000, 5, 256000}},
-  { "cameraOdometry", {"cameraOdometry", true, 20.000000, 10, 256000}},
-  { "thumbnail", {"thumbnail", true, 0.016667, 1, 256000}},
-  { "onroadEvents", {"onroadEvents", true, 1.000000, 1, 256000}},
-  { "carParams", {"carParams", true, 0.020000, 1, 256000}},
-  { "roadCameraState", {"roadCameraState", true, 20.000000, 20, 256000}},
-  { "driverCameraState", {"driverCameraState", true, 20.000000, 20, 256000}},
-  { "driverEncodeIdx", {"driverEncodeIdx", false, 20.000000, 1, 256000}},
-  { "driverStateV2", {"driverStateV2", true, 20.000000, 10, 256000}},
-  { "driverMonitoringState", {"driverMonitoringState", true, 20.000000, 10, 256000}},
-  { "wideRoadEncodeIdx", {"wideRoadEncodeIdx", false, 20.000000, 1, 256000}},
-  { "wideRoadCameraState", {"wideRoadCameraState", true, 20.000000, 20, 256000}},
-  { "drivingModelData", {"drivingModelData", true, 20.000000, 10, 256000}},
-  { "modelV2", {"modelV2", true, 20.000000, -1, 10485760}},
-  { "managerState", {"managerState", true, 2.000000, 1, 256000}},
-  { "uploaderState", {"uploaderState", true, 0.000000, 1, 256000}},
-  { "navInstruction", {"navInstruction", true, 1.000000, 10, 256000}},
-  { "navRoute", {"navRoute", true, 0.000000, -1, 256000}},
-  { "navThumbnail", {"navThumbnail", true, 0.000000, -1, 256000}},
-  { "qRoadEncodeIdx", {"qRoadEncodeIdx", false, 20.000000, -1, 256000}},
-  { "userBookmark", {"userBookmark", true, 0.000000, 1, 256000}},
-  { "soundPressure", {"soundPressure", true, 10.000000, 10, 256000}},
-  { "rawAudioData", {"rawAudioData", false, 20.000000, -1, 256000}},
-  { "bookmarkButton", {"bookmarkButton", true, 0.000000, 1, 256000}},
-  { "audioFeedback", {"audioFeedback", true, 0.000000, 1, 256000}},
-  { "roadEncodeData", {"roadEncodeData", false, 20.000000, -1, 10485760}},
-  { "driverEncodeData", {"driverEncodeData", false, 20.000000, -1, 10485760}},
-  { "wideRoadEncodeData", {"wideRoadEncodeData", false, 20.000000, -1, 10485760}},
-  { "qRoadEncodeData", {"qRoadEncodeData", false, 20.000000, -1, 10485760}},
-  { "uiDebug", {"uiDebug", true, 0.000000, 1, 256000}},
-  { "testJoystick", {"testJoystick", true, 0.000000, -1, 256000}},
-  { "alertDebug", {"alertDebug", true, 20.000000, 5, 256000}},
-  { "livestreamWideRoadEncodeIdx", {"livestreamWideRoadEncodeIdx", false, 20.000000, -1, 256000}},
-  { "livestreamRoadEncodeIdx", {"livestreamRoadEncodeIdx", false, 20.000000, -1, 256000}},
-  { "livestreamDriverEncodeIdx", {"livestreamDriverEncodeIdx", false, 20.000000, -1, 256000}},
-  { "livestreamWideRoadEncodeData", {"livestreamWideRoadEncodeData", false, 20.000000, -1, 2097152}},
-  { "livestreamRoadEncodeData", {"livestreamRoadEncodeData", false, 20.000000, -1, 2097152}},
-  { "livestreamDriverEncodeData", {"livestreamDriverEncodeData", false, 20.000000, -1, 2097152}},
-  { "customReservedRawData0", {"customReservedRawData0", true, 0.000000, -1, 256000}},
-  { "customReservedRawData1", {"customReservedRawData1", true, 0.000000, -1, 256000}},
-  { "customReservedRawData2", {"customReservedRawData2", true, 0.000000, -1, 256000}},
-  { "frogpilotCarControl", {"frogpilotCarControl", true, 100.000000, 10, 256000}},
-  { "frogpilotCarParams", {"frogpilotCarParams", true, 0.020000, 1, 256000}},
-  { "frogpilotCarState", {"frogpilotCarState", true, 100.000000, 10, 256000}},
-  { "frogpilotDeviceState", {"frogpilotDeviceState", true, 2.000000, 1, 256000}},
-  { "frogpilotModelV2", {"frogpilotModelV2", true, 20.000000, -1, 256000}},
-  { "frogpilotOnroadEvents", {"frogpilotOnroadEvents", true, 1.000000, 1, 256000}},
-  { "frogpilotPlan", {"frogpilotPlan", true, 20.000000, 10, 256000}},
-  { "frogpilotRadarState", {"frogpilotRadarState", true, 20.000000, 5, 256000}},
-  { "frogpilotSelfdriveState", {"frogpilotSelfdriveState", true, 100.000000, 10, 256000}},
-  { "mapdExtendedOut", {"mapdExtendedOut", true, 1.000000, 1, 2097152}},
-  { "mapdIn", {"mapdIn", true, 1.000000, 1, 2097152}},
-  { "mapdOut", {"mapdOut", true, 20.000000, 20, 2097152}},
-};
-#endif
-

cereal/services.py

@@ -1,147 +0,0 @@
-#!/usr/bin/env python3
-from enum import IntEnum
-from typing import Optional
-
-
-# TODO: this should be automatically determined using the capnp schema
-class QueueSize(IntEnum):
-  BIG = 10 * 1024 * 1024      # 10MB - video frames, large AI outputs
-  MEDIUM = 2 * 1024 * 1024    # 2MB - high freq (CAN), livestream
-  SMALL = 250 * 1024          # 250KB - most services
-
-
-class Service:
-  def __init__(self, should_log: bool, frequency: float, decimation: Optional[int] = None,
-               queue_size: QueueSize = QueueSize.SMALL):
-    self.should_log = should_log
-    self.frequency = frequency
-    self.decimation = decimation
-    self.queue_size = queue_size
-
-
-_services: dict[str, tuple] = {
-  # service: (should_log, frequency, qlog decimation (optional))
-  # note: the "EncodeIdx" packets will still be in the log
-  "gyroscope": (True, 104., 104),
-  "accelerometer": (True, 104., 104),
-  "magnetometer": (True, 25.),
-  "lightSensor": (True, 100., 100),
-  "temperatureSensor": (True, 2., 200),
-  "gpsNMEA": (True, 9.),
-  "deviceState": (True, 2., 1),
-  "touch": (True, 20., 1),
-  "can": (True, 100., 2053, QueueSize.BIG),  # decimation gives ~3 msgs in a full segment
-  "controlsState": (True, 100., 10, QueueSize.MEDIUM),
-  "selfdriveState": (True, 100., 10),
-  "pandaStates": (True, 10., 1),
-  "peripheralState": (True, 2., 1),
-  "radarState": (True, 20., 5),
-  "roadEncodeIdx": (False, 20., 1),
-  "liveTracks": (True, 20.),
-  "sendcan": (True, 100., 139, QueueSize.MEDIUM),
-  "logMessage": (True, 0.),
-  "errorLogMessage": (True, 0., 1),
-  "liveCalibration": (True, 4., 4),
-  "liveTorqueParameters": (True, 4., 1),
-  "liveDelay": (True, 4., 1),
-  "androidLog": (True, 0.),
-  "carState": (True, 100., 10),
-  "carControl": (True, 100., 10),
-  "carOutput": (True, 100., 10),
-  "longitudinalPlan": (True, 20., 10),
-  "driverAssistance": (True, 20., 20),
-  "procLog": (True, 0.5, 15, QueueSize.BIG),
-  "gpsLocationExternal": (True, 10., 10),
-  "gpsLocation": (True, 1., 1),
-  "ubloxGnss": (True, 10.),
-  "qcomGnss": (True, 2.),
-  "gnssMeasurements": (True, 10., 10),
-  "clocks": (True, 0.1, 1),
-  "ubloxRaw": (True, 20.),
-  "livePose": (True, 20., 4),
-  "liveParameters": (True, 20., 5),
-  "cameraOdometry": (True, 20., 10),
-  "thumbnail": (True, 1 / 60., 1),
-  "onroadEvents": (True, 1., 1),
-  "carParams": (True, 0.02, 1),
-  "roadCameraState": (True, 20., 20),
-  "driverCameraState": (True, 20., 20),
-  "driverEncodeIdx": (False, 20., 1),
-  "driverStateV2": (True, 20., 10),
-  "driverMonitoringState": (True, 20., 10),
-  "wideRoadEncodeIdx": (False, 20., 1),
-  "wideRoadCameraState": (True, 20., 20),
-  "drivingModelData": (True, 20., 10),
-  "modelV2": (True, 20., None, QueueSize.BIG),
-  "managerState": (True, 2., 1),
-  "uploaderState": (True, 0., 1),
-  "navInstruction": (True, 1., 10),
-  "navRoute": (True, 0.),
-  "navThumbnail": (True, 0.),
-  "qRoadEncodeIdx": (False, 20.),
-  "userBookmark": (True, 0., 1),
-  "soundPressure": (True, 10., 10),
-  "rawAudioData": (False, 20.),
-  "bookmarkButton": (True, 0., 1),
-  "audioFeedback": (True, 0., 1),
-  "roadEncodeData": (False, 20., None, QueueSize.BIG),
-  "driverEncodeData": (False, 20., None, QueueSize.BIG),
-  "wideRoadEncodeData": (False, 20., None, QueueSize.BIG),
-  "qRoadEncodeData": (False, 20., None, QueueSize.BIG),
-
-  # debug
-  "uiDebug": (True, 0., 1),
-  "testJoystick": (True, 0.),
-  "alertDebug": (True, 20., 5),
-  "livestreamWideRoadEncodeIdx": (False, 20.),
-  "livestreamRoadEncodeIdx": (False, 20.),
-  "livestreamDriverEncodeIdx": (False, 20.),
-  "livestreamWideRoadEncodeData": (False, 20., None, QueueSize.MEDIUM),
-  "livestreamRoadEncodeData": (False, 20., None, QueueSize.MEDIUM),
-  "livestreamDriverEncodeData": (False, 20., None, QueueSize.MEDIUM),
-  "customReservedRawData0": (True, 0.),
-  "customReservedRawData1": (True, 0.),
-  "customReservedRawData2": (True, 0.),
-
-  # FrogPilot variables
-  "frogpilotCarControl": (True, 100., 10),
-  "frogpilotCarParams": (True, 0.02, 1),
-  "frogpilotCarState": (True, 100., 10),
-  "frogpilotDeviceState": (True, 2., 1),
-  "frogpilotModelV2": (True, 20.),
-  "frogpilotOnroadEvents": (True, 1., 1),
-  "frogpilotPlan": (True, 20., 10),
-  "frogpilotRadarState": (True, 20., 5),
-  "frogpilotSelfdriveState": (True, 100., 10),
-  "mapdExtendedOut": (True, 1., 1, QueueSize.MEDIUM),
-  "mapdIn": (True, 1., 1, QueueSize.MEDIUM),
-  "mapdOut": (True, 20., 20, QueueSize.MEDIUM),
-}
-SERVICE_LIST = {name: Service(*vals) for
-                idx, (name, vals) in enumerate(_services.items())}
-
-
-def build_header():
-  h = ""
-  h += "/* THIS IS AN AUTOGENERATED FILE, PLEASE EDIT services.py */\n"
-  h += "#ifndef __SERVICES_H\n"
-  h += "#define __SERVICES_H\n"
-
-  h += "#include <map>\n"
-  h += "#include <string>\n"
-
-  h += "struct service { std::string name; bool should_log; float frequency; int decimation; size_t queue_size; };\n"
-  h += "static std::map<std::string, service> services = {\n"
-  for k, v in SERVICE_LIST.items():
-    should_log = "true" if v.should_log else "false"
-    decimation = -1 if v.decimation is None else v.decimation
-    h += '  { "%s", {"%s", %s, %f, %d, %d}},\n' % \
-         (k, k, should_log, v.frequency, decimation, v.queue_size)
-  h += "};\n"
-
-  h += "#endif\n"
-  return h
-
-
-if __name__ == "__main__":
-  print(build_header())

common/.gitignore

@@ -1,2 +0,0 @@
-*.cpp
-!params_pyx.cpp

common/SConscript

@@ -1,35 +0,0 @@
-Import('env', 'envCython', 'arch')
-
-common_libs = [
-  'params.cc',
-  'swaglog.cc',
-  'util.cc',
-  'watchdog.cc',
-  'ratekeeper.cc'
-]
-
-_common = env.Library('common', common_libs, LIBS="json11")
-
-files = [
-  'clutil.cc',
-]
-
-_gpucommon = env.Library('gpucommon', files)
-Export('_common', '_gpucommon')
-
-if GetOption('extras'):
-  env.Program('tests/test_common',
-              ['tests/test_runner.cc', 'tests/test_params.cc', 'tests/test_util.cc', 'tests/test_swaglog.cc'],
-              LIBS=[_common, 'json11', 'zmq', 'pthread'])
-
-# Cython bindings
-params_python = envCython.Program('params_pyx.so', 'params_pyx.pyx', LIBS=envCython['LIBS'] + [_common, 'zmq', 'json11'])
-
-SConscript([
-  'transformations/SConscript',
-])
-
-Import('transformations_python')
-common_python = [params_python, transformations_python]
-
-Export('common_python')

common/api.py

@@ -1,64 +0,0 @@
-import jwt
-import os
-import requests
-from datetime import datetime, timedelta, UTC
-from openpilot.system.hardware.hw import Paths
-from openpilot.system.version import get_version
-
-from openpilot.frogpilot.common.frogpilot_utilities import use_konik_server
-
-API_HOST = os.getenv('API_HOST', f"https://api.{'konik.ai' if use_konik_server() else 'commadotai.com'}")
-
-# name: jwt signature algorithm
-KEYS = {"id_rsa": "RS256",
-        "id_ecdsa": "ES256"}
-
-
-class Api:
-  def __init__(self, dongle_id):
-    self.dongle_id = dongle_id
-    self.jwt_algorithm, self.private_key, _ = get_key_pair()
-
-  def get(self, *args, **kwargs):
-    return self.request('GET', *args, **kwargs)
-
-  def post(self, *args, **kwargs):
-    return self.request('POST', *args, **kwargs)
-
-  def request(self, method, endpoint, timeout=None, access_token=None, **params):
-    return api_get(endpoint, method=method, timeout=timeout, access_token=access_token, **params)
-
-  def get_token(self, payload_extra=None, expiry_hours=1):
-    now = datetime.now(UTC).replace(tzinfo=None)
-    payload = {
-      'identity': self.dongle_id,
-      'nbf': now,
-      'iat': now,
-      'exp': now + timedelta(hours=expiry_hours)
-    }
-    if payload_extra is not None:
-      payload.update(payload_extra)
-    token = jwt.encode(payload, self.private_key, algorithm=self.jwt_algorithm)
-    if isinstance(token, bytes):
-      token = token.decode('utf8')
-    return token
-
-
-def api_get(endpoint, method='GET', timeout=None, access_token=None, session=None, **params):
-  headers = {}
-  if access_token is not None:
-    headers['Authorization'] = "JWT " + access_token
-
-  headers['User-Agent'] = "openpilot-" + get_version()
-
-  # TODO: add session to Api
-  req = requests if session is None else session
-  return req.request(method, API_HOST + "/" + endpoint, timeout=timeout, headers=headers, params=params)
-
-
-def get_key_pair() -> tuple[str, str, str] | tuple[None, None, None]:
-  for key in KEYS:
-    if os.path.isfile(Paths.persist_root() + f'/comma/{key}') and os.path.isfile(Paths.persist_root() + f'/comma/{key}.pub'):
-      with open(Paths.persist_root() + f'/comma/{key}') as private, open(Paths.persist_root() + f'/comma/{key}.pub') as public:
-        return KEYS[key], private.read(), public.read()
-  return None, None, None

common/api/__init__.py

@@ -0,0 +1,15 @@
+import requests
+
+from selfdrive.version import version
+
+def api_get(endpoint, method='GET', timeout=None, access_token=None, **params):
+  backend = "https://api.commadotai.com/"
+
+  headers = {}
+  if access_token is not None:
+    headers['Authorization'] = "JWT "+access_token
+
+  headers['User-Agent'] = "openpilot-" + version
+
+  return requests.request(method, backend+endpoint, timeout=timeout, headers = headers, params=params)
+

common/basedir.py

@@ -1,4 +1,4 @@
 import os
-
-
 BASEDIR = os.path.abspath(os.path.join(os.path.dirname(os.path.realpath(__file__)), "../"))
+
+

common/clutil.cc

@@ -1,129 +0,0 @@
-#include "common/clutil.h"
-
-#include <cassert>
-#include <iostream>
-#include <memory>
-
-#include "common/util.h"
-#include "common/swaglog.h"
-
-namespace {  // helper functions
-
-template <typename Func, typename Id, typename Name>
-std::string get_info(Func get_info_func, Id id, Name param_name) {
-  size_t size = 0;
-  CL_CHECK(get_info_func(id, param_name, 0, NULL, &size));
-  std::string info(size, '\0');
-  CL_CHECK(get_info_func(id, param_name, size, info.data(), NULL));
-  return info;
-}
-inline std::string get_platform_info(cl_platform_id id, cl_platform_info name) { return get_info(&clGetPlatformInfo, id, name); }
-inline std::string get_device_info(cl_device_id id, cl_device_info name) { return get_info(&clGetDeviceInfo, id, name); }
-
-void cl_print_info(cl_platform_id platform, cl_device_id device) {
-  size_t work_group_size = 0;
-  cl_device_type device_type = 0;
-  clGetDeviceInfo(device, CL_DEVICE_MAX_WORK_GROUP_SIZE, sizeof(work_group_size), &work_group_size, NULL);
-  clGetDeviceInfo(device, CL_DEVICE_TYPE, sizeof(device_type), &device_type, NULL);
-  const char *type_str = "Other...";
-  switch (device_type) {
-    case CL_DEVICE_TYPE_CPU: type_str ="CL_DEVICE_TYPE_CPU"; break;
-    case CL_DEVICE_TYPE_GPU: type_str = "CL_DEVICE_TYPE_GPU"; break;
-    case CL_DEVICE_TYPE_ACCELERATOR: type_str = "CL_DEVICE_TYPE_ACCELERATOR"; break;
-  }
-
-  LOGD("vendor: %s", get_platform_info(platform, CL_PLATFORM_VENDOR).c_str());
-  LOGD("platform version: %s", get_platform_info(platform, CL_PLATFORM_VERSION).c_str());
-  LOGD("profile: %s", get_platform_info(platform, CL_PLATFORM_PROFILE).c_str());
-  LOGD("extensions: %s", get_platform_info(platform, CL_PLATFORM_EXTENSIONS).c_str());
-  LOGD("name: %s", get_device_info(device, CL_DEVICE_NAME).c_str());
-  LOGD("device version: %s", get_device_info(device, CL_DEVICE_VERSION).c_str());
-  LOGD("max work group size: %zu", work_group_size);
-  LOGD("type = %d, %s", (int)device_type, type_str);
-}
-
-void cl_print_build_errors(cl_program program, cl_device_id device) {
-  cl_build_status status;
-  clGetProgramBuildInfo(program, device, CL_PROGRAM_BUILD_STATUS, sizeof(status), &status, NULL);
-  size_t log_size;
-  clGetProgramBuildInfo(program, device, CL_PROGRAM_BUILD_LOG, 0, NULL, &log_size);
-  std::string log(log_size, '\0');
-  clGetProgramBuildInfo(program, device, CL_PROGRAM_BUILD_LOG, log_size, &log[0], NULL);
-
-  LOGE("build failed; status=%d, log: %s", status, log.c_str());
-}
-
-std::string resolve_program_path(const char *path) {
-  std::string resolved_path(path);
-  if (util::file_exists(resolved_path)) {
-    return resolved_path;
-  }
-
-  const std::string basedir = util::getenv("BASEDIR", "");
-  if (!basedir.empty()) {
-    // Handle repository-relative paths, e.g. "selfdrive/modeld/transforms/transform.cl".
-    if (!resolved_path.empty() && resolved_path.front() != '/') {
-      const std::string candidate = basedir + "/" + resolved_path;
-      if (util::file_exists(candidate)) {
-        return candidate;
-      }
-    }
-
-    // Recover from build-path-embedded absolute paths like "/work/selfdrive/...".
-    for (const char *marker : {"/selfdrive/", "/frogpilot/", "/common/"}) {
-      if (const size_t idx = resolved_path.find(marker); idx != std::string::npos) {
-        const std::string candidate = basedir + "/" + resolved_path.substr(idx + 1);
-        if (util::file_exists(candidate)) {
-          LOGW("OpenCL source path remapped: %s -> %s", resolved_path.c_str(), candidate.c_str());
-          return candidate;
-        }
-      }
-    }
-  }
-
-  return resolved_path;
-}
-
-}  // namespace
-
-cl_device_id cl_get_device_id(cl_device_type device_type) {
-  cl_uint num_platforms = 0;
-  CL_CHECK(clGetPlatformIDs(0, NULL, &num_platforms));
-  std::unique_ptr<cl_platform_id[]> platform_ids = std::make_unique<cl_platform_id[]>(num_platforms);
-  CL_CHECK(clGetPlatformIDs(num_platforms, &platform_ids[0], NULL));
-
-  for (size_t i = 0; i < num_platforms; ++i) {
-    LOGD("platform[%zu] CL_PLATFORM_NAME: %s", i, get_platform_info(platform_ids[i], CL_PLATFORM_NAME).c_str());
-
-    // Get first device
-    if (cl_device_id device_id = NULL; clGetDeviceIDs(platform_ids[i], device_type, 1, &device_id, NULL) == 0 && device_id) {
-      cl_print_info(platform_ids[i], device_id);
-      return device_id;
-    }
-  }
-  LOGE("No valid openCL platform found");
-  assert(0);
-  return nullptr;
-}
-
-cl_context cl_create_context(cl_device_id device_id) {
-  return CL_CHECK_ERR(clCreateContext(NULL, 1, &device_id, NULL, NULL, &err));
-}
-
-void cl_release_context(cl_context context) {
-  clReleaseContext(context);
-}
-
-cl_program cl_program_from_file(cl_context ctx, cl_device_id device_id, const char* path, const char* args) {
-  return cl_program_from_source(ctx, device_id, util::read_file(resolve_program_path(path)), args);
-}
-
-cl_program cl_program_from_source(cl_context ctx, cl_device_id device_id, const std::string& src, const char* args) {
-  const char *csrc = src.c_str();
-  cl_program prg = CL_CHECK_ERR(clCreateProgramWithSource(ctx, 1, &csrc, NULL, &err));
-  if (int err = clBuildProgram(prg, 1, &device_id, args, NULL, NULL); err != 0) {
-    cl_print_build_errors(prg, device_id);
-    assert(0);
-  }
-  return prg;
-}

common/clutil.h

@@ -1,28 +0,0 @@
-#pragma once
-
-#ifdef __APPLE__
-#include <OpenCL/cl.h>
-#else
-#include <CL/cl.h>
-#endif
-
-#include <string>
-
-#define CL_CHECK(_expr)          \
-  do {                           \
-    assert(CL_SUCCESS == (_expr)); \
-  } while (0)
-
-#define CL_CHECK_ERR(_expr)           \
-  ({                                  \
-    cl_int err = CL_INVALID_VALUE;    \
-    __typeof__(_expr) _ret = _expr;   \
-    assert(_ret&& err == CL_SUCCESS); \
-    _ret;                             \
-  })
-
-cl_device_id cl_get_device_id(cl_device_type device_type);
-cl_context cl_create_context(cl_device_id device_id);
-void cl_release_context(cl_context context);
-cl_program cl_program_from_source(cl_context ctx, cl_device_id device_id, const std::string& src, const char* args = nullptr);
-cl_program cl_program_from_file(cl_context ctx, cl_device_id device_id, const char* path, const char* args);