* Reapply "feat(lpa): `at` client + list profiles (#37271)" (#37322)
This reverts commit ddf8abc14a.
* lpa: fall back to ModemManager D-Bus when serial port unavailable
On older devices, ModemManager still claims /dev/ttyUSB2, so the
direct serial open fails. Try serial first; if it can't be acquired,
transparently route AT commands through MM's D-Bus Command() interface.
Co-authored-by: Cursor <cursoragent@cursor.com>
* lpa: add serial/dbus transport labels to debug logs
Co-authored-by: Cursor <cursoragent@cursor.com>
* no
* lint
* here
* const
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* disable forget for tethering
* nets
* put in wifiman
* batch
* Revert "batch"
This reverts commit 9af20c1c7513c22bf9283b2f02514373fa981f50.
* clean up
* more
* more
* use vendored eigen from dependencies repo
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* lock
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* use vendored zeromq from dependencies repo
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* lock
* rm more crap
* use vendored git-lfs from dependencies repo
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* from releases
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* rm extra LLVM install on macOS
* update that
* rm brew cache
* no cache
* Revert "no cache"
This reverts commit a3f8eff234935d4bb27d4bd785ad8a710496a159.
* use vendored zeromq from dependencies repo
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* lock
* rm more crap
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* start
* start
* lil more
* add forget
* fix forget button scrolling
* push right a bit
* fix forget press
* add divider
* fix scroll panel
* better forget and overriding
* revert this
* check icon
* cursor merge conflict fix
* fix rounding and forget btn placement
* scroll indicator
* 65%
* calibrate
* try loading animation
* push to device
* top right
* bottom right
* no red
* top left
* bottom left
* down 2px
* WHY DOES NETWORK MANAGER KEEP CRASHING AHHH
* reduce round trip calls in update_networks
* clean up and combine getallaccesspoint and activeaccesspoint
* cmt
* animate big button over smoothly. super hacky, need to clean up
* animate
* remove old widgets and images
* remove status label, tune loading animation opac back
* connecting is a little buggy still
* add back missing network and don't pop
* some fixes
* "clean up"
* fix lag in animation
* fix adding saved connection to start
* remove saved network to start, divider
* animate up, over, and down
* revert for now
* remove fancy complex animation for now, sorry nick
* remove divider + clean up
* more clean up
* more clean up
* fix forget button press
* cmt
* tweak loading animation behavior
* new lock fix wifi
* rm old lock
* great catch by opus
* clean up
* debug
* fix touch events that are down -> up in one frame (why it only bugged on mici)
* clean up
* eager forgetting
* this SHOULD be full eager forget, more than i thought
* fix wifi slash positioning
* move forgotten networks after saved networks
* temp keep
* test on device
* fix
* see 65
* 5 best
* fix double render double brightness
* can click bottom right now
* disable touch while animating
* fix animation
* can scroll while animating, not tap
* not great yet
* clean up
* didn't work
* always update networks after activation
* stash
* move to update_state
* debug
* debug
* temp
* fix ip and metered flickering when updating at high freq (or rare race condition)
* fix
* if you give it less than 8 chars it never clears connecting
* lock no int
* better wrong password handling
* shake when wrong password
* nm set connecting when it connects on its own
* loading bottom right
* sort connecting first
* sort by unquantized to put strongest first
* clean up
* clean up nm
* clean up nm
* shorter
* fix crash
* 0.5s
* debug
* revert and try something else
* stash
* no
* rev
* use signals
* more
* not wrong password if ever connected after wrong
* similar to gnome shell, don't save connection that never successfully activated.
we do this by creating temporary memory connection with persist: volatile that deletes itself if failed, and then only write to disk when activated
* clean up
* cover all states
* clear if connecting too
* remove pritn
* might need this for CoxWifi
* whoops
* save last pass
* Revert "whoops"
This reverts commit 83a133955246ce32dcf119ededd8b01b3162a866.
* Revert "might need this for CoxWifi"
This reverts commit cddb8b35be152ed154462b188283f9d5a844583d.
* this may be less noisy for low strength networks, but less accurate as previous was reflecting nm state better
* Revert "this may be less noisy for low strength networks, but less accurate as previous was reflecting nm state better"
This reverts commit 740286c846556f32125a96bfe6ecf128300af0d8.
* race condition with volotile not removing conn fast enough/update networks not firing fast enough
* Revert "save last pass"
This reverts commit 7249a58a18b11487fd0370cee36e40a17f7ac521.
* revert some wifiman stuff to master
* not needed
* rm active ap
* remove old dead code
* do after
* always send forgotten callback so we can't be stuck in forgetting state forever
* reproduce race condition where connection removed signal takes a while to remove, then update networks keep is_saved true
* fix from merge
* nice, we can remove some eager code now for treating is_saved as not saved after forgot since it's live
* more
* rm
* simplify passed in callbacks
* clean up
* need this one check back for wrong password to hide forget for a split second
* opus says this is simpler 🤔
* Revert "opus says this is simpler 🤔"
This reverts commit 71472e5b383d7f2083d95ba1188070f41ae14775.
* another attempt
* Revert "another attempt"
This reverts commit 31f30babe656f9cad24399bc2196bb6e7ab79bbd.
* fix from merge
* some lcean up
* fix
* fixes to make work with new animation
* clean up
* this works too
* simplify loading animation behavior for now, revert wifi scan time
* clean up
* temporary fix
* stash
* Revert "stash"
This reverts commit 7471dbdc452807b33b4868a98dd8565681b2e44d.
* stash
* Revert "stash"
This reverts commit e0e5e6e861734320ce5dea5626086784577cb334.
* this check was because is_connected could have been stale from Network as the source
* nm can show connected/connecting to network with 0 aps for a while if strength is low, move out of range under those states
* stash
* Revert "stash"
This reverts commit 5ec3b454d54392523947f6477f551657d3863a6d.
* todo
* todo
* order
* don't need temporary fix anymore
* cmt
* order
* unused i
* stash
* test seemed to work
* simplify
* clean up
* move under
* Revert "move under"
This reverts commit ce940cffb32378cbe5a69edaf6fc9d9cec202e54.
* back
* fix
* already 90% of the way there and not 144 lines
* nice
* lift properly
* lift, wait, move, wait, drop!
* some clean up
* epic, he ran a simulation to turn opacity filter into pixels
* scroll independant move animation without layout!
* move into function
* clean up
* rm
* overlay behind moving item
* Revert "overlay behind moving item"
This reverts commit 598e22363eb66af6496fe5f1eea8e643d4c2adbb.
* simpler overlay under lifted item
* support multiple animations at once
* Revert "support multiple animations at once"
This reverts commit 3ce6c8281053ee4831ceb88cacf66c343fc7d7ff.
* clean up
* cmt
* clean up
* kinda works
* Revert "kinda works"
This reverts commit ff050c6afc058788b3189a0acc202ada17353504.
* clean up
clean up
* clear overlay
* diff report
* don't break more
* split nav widget out
* clean up
* clean up
* fix
* work
* small enough to not be function
* nah we want intflag
* clean up
* always runs
* more clean up
* prep for scroller
* opacity for settings
* clean up layout
* set enabled
* rm
Adeeb Shihadeh