fix hash

update ota/recovery url
update sentry
2026-07-19 20:02:04 +08:00 · 2020-11-10 16:40:01 +10:00 · 2020-11-10 12:38:46 +10:00 · 2020-09-23 15:04:21 +10:00 · 2020-07-06 20:58:16 +10:00 · 2020-06-19 16:50:38 -07:00
1131 changed files with 43461 additions and 225461 deletions
@@ -20,7 +20,9 @@ a.out
 .*.un~
 *.tmp
 *.o
+*.o-*
 *.os
+*.os-*
 *.so
 *.a
 *.clb
@@ -54,6 +56,9 @@ xx
 panda_jungle

 .coverage*
+coverage.xml
+cppcheck_report.txt
 htmlcov
 pandaextra

+.mypy_cache/
@@ -1,585 +0,0 @@
-[MASTER]
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code
-extension-pkg-whitelist=scipy
-
-# Add files or directories to the blacklist. They should be base names, not
-# paths.
-ignore=CVS
-
-# Add files or directories matching the regex patterns to the blacklist. The
-# regex matches against base names, not paths.
-ignore-patterns=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Use multiple processes to speed up Pylint.
-jobs=4
-
-# List of plugins (as comma separated values of python modules names) to load,
-# usually to register additional checkers.
-load-plugins=
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# Specify a configuration file.
-#rcfile=
-
-# When enabled, pylint would attempt to guess common misconfiguration and emit
-# user-friendly hints instead of false-positive error messages
-suggestion-mode=yes
-
-# Allow loading of arbitrary C extensions. Extensions are imported into the
-# active Python interpreter and may run arbitrary code.
-unsafe-load-any-extension=no
-
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
-confidence=
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once).You can also use "--disable=all" to
-# disable everything first and then reenable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use"--disable=all --enable=classes
-# --disable=W"
-disable=print-statement,
-        parameter-unpacking,
-        unpacking-in-except,
-        old-raise-syntax,
-        backtick,
-        long-suffix,
-        old-ne-operator,
-        old-octal-literal,
-        import-star-module-level,
-        non-ascii-bytes-literal,
-        raw-checker-failed,
-        bad-inline-option,
-        locally-disabled,
-        locally-enabled,
-        file-ignored,
-        suppressed-message,
-        useless-suppression,
-        deprecated-pragma,
-        apply-builtin,
-        basestring-builtin,
-        buffer-builtin,
-        cmp-builtin,
-        coerce-builtin,
-        execfile-builtin,
-        file-builtin,
-        long-builtin,
-        raw_input-builtin,
-        reduce-builtin,
-        standarderror-builtin,
-        unicode-builtin,
-        xrange-builtin,
-        coerce-method,
-        delslice-method,
-        getslice-method,
-        setslice-method,
-        no-absolute-import,
-        old-division,
-        dict-iter-method,
-        dict-view-method,
-        next-method-called,
-        metaclass-assignment,
-        indexing-exception,
-        raising-string,
-        reload-builtin,
-        oct-method,
-        hex-method,
-        nonzero-method,
-        cmp-method,
-        input-builtin,
-        round-builtin,
-        intern-builtin,
-        unichr-builtin,
-        map-builtin-not-iterating,
-        zip-builtin-not-iterating,
-        range-builtin-not-iterating,
-        filter-builtin-not-iterating,
-        using-cmp-argument,
-        eq-without-hash,
-        div-method,
-        idiv-method,
-        rdiv-method,
-        exception-message-attribute,
-        invalid-str-codec,
-        sys-max-int,
-        bad-python3-import,
-        deprecated-string-function,
-        deprecated-str-translate-call,
-        deprecated-itertools-function,
-        deprecated-types-field,
-        next-method-defined,
-        dict-items-not-iterating,
-        dict-keys-not-iterating,
-        dict-values-not-iterating,
-        bad-indentation,
-        line-too-long,
-        missing-docstring,
-        multiple-statements,
-        bad-continuation,
-        invalid-name,
-        too-many-arguments,
-        too-many-locals,
-        superfluous-parens,
-        bad-whitespace,
-        too-many-instance-attributes,
-        wrong-import-position,
-        ungrouped-imports,
-        wrong-import-order,
-        protected-access,
-        trailing-whitespace,
-        too-many-branches,
-        too-few-public-methods,
-        too-many-statements,
-        trailing-newlines,
-        attribute-defined-outside-init,
-        too-many-return-statements,
-        too-many-public-methods,
-        unused-argument,
-        old-style-class,
-        no-init,
-        len-as-condition,
-        unneeded-not,
-        no-self-use,
-        multiple-imports,
-        no-else-return,
-        logging-not-lazy,
-        fixme,
-        redefined-outer-name,
-        unused-variable,
-        unsubscriptable-object,
-        expression-not-assigned,
-        too-many-boolean-expressions,
-        consider-using-ternary,
-        invalid-unary-operand-type,
-        relative-import,
-        deprecated-lambda
-
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time (only on the command line, not in the configuration file where
-# it should appear only once). See also the "--disable" option for examples.
-enable=c-extension-no-member
-
-
-[REPORTS]
-
-# Python expression which should return a note less than 10 (10 is the highest
-# note). You have access to the variables errors warning, statement which
-# respectively contain the number of errors / warnings messages and the total
-# number of statements analyzed. This is used by the global evaluation report
-# (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details
-#msg-template=
-
-# Set the output format. Available formats are text, parseable, colorized, json
-# and msvs (visual studio).You can also give a reporter class, eg
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Tells whether to display a full report or only the messages
-reports=no
-
-# Activate the evaluation score.
-score=yes
-
-
-[REFACTORING]
-
-# Maximum number of nested blocks for function / method body
-max-nested-blocks=5
-
-# Complete name of functions that never returns. When checking for
-# inconsistent-return-statements if a never returning function is called then
-# it will be considered as an explicit return statement and no message will be
-# printed.
-never-returning-functions=optparse.Values,sys.exit
-
-
-[LOGGING]
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format
-logging-modules=logging
-
-
-[SPELLING]
-
-# Limits count of emitted suggestions for spelling mistakes
-max-spelling-suggestions=4
-
-# Spelling dictionary name. Available dictionaries: none. To make it working
-# install python-enchant package.
-spelling-dict=
-
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
-
-# A path to a file that contains private dictionary; one word per line.
-spelling-private-dict-file=
-
-# Tells whether to store unknown words to indicated private dictionary in
-# --spelling-private-dict-file option instead of raising a message.
-spelling-store-unknown-words=no
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-notes=FIXME,
-      XXX,
-      TODO
-
-
-[SIMILARITIES]
-
-# Ignore comments when computing similarities.
-ignore-comments=yes
-
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
-
-# Ignore imports when computing similarities.
-ignore-imports=no
-
-# Minimum lines number of a similarity.
-min-similarity-lines=4
-
-
-[TYPECHECK]
-
-# List of decorators that produce context managers, such as
-# contextlib.contextmanager. Add to this list to register other decorators that
-# produce valid context managers.
-contextmanager-decorators=contextlib.contextmanager
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E1101 when accessed. Python regular
-# expressions are accepted.
-generated-members=capnp.* cereal.* pygame.* zmq.* setproctitle.* smbus2.* usb1.* serial.* cv2.*
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# This flag controls whether pylint should warn about no-member and similar
-# checks whenever an opaque object is returned when inferring. The inference
-# can return multiple potential results while evaluating a Python object, but
-# some branches might not be evaluated, which results in partial inference. In
-# that case, it might be useful to still emit no-member and other checks for
-# the rest of the inferred objects.
-ignore-on-opaque-inference=yes
-
-# List of class names for which member attributes should not be checked (useful
-# for classes with dynamically set attributes). This supports the use of
-# qualified names.
-ignored-classes=optparse.Values,thread._local,_thread._local
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis. It
-# supports qualified module names, as well as Unix pattern matching.
-ignored-modules=flask setproctitle usb1 flask.ext.socketio smbus2 usb1.*
-
-# Show a hint with possible names when a member name was not found. The aspect
-# of finding the hint is based on edit distance.
-missing-member-hint=yes
-
-# The minimum edit distance a name should have in order to be considered a
-# similar match for a missing member name.
-missing-member-hint-distance=1
-
-# The total number of similar names that should be taken in consideration when
-# showing a hint for a missing member.
-missing-member-max-choices=1
-
-
-[VARIABLES]
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid to define new builtins when possible.
-additional-builtins=
-
-# Tells whether unused global variables should be treated as a violation.
-allow-global-unused-variables=yes
-
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,
-          _cb
-
-# A regular expression matching the name of dummy variables (i.e. expectedly
-# not used).
-dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
-
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore
-ignored-argument-names=_.*|^ignored_|^unused_
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# List of qualified module names which can have objects that can redefine
-# builtins.
-redefining-builtins-modules=six.moves,past.builtins,future.builtins
-
-
-[FORMAT]
-
-# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
-expected-line-ending-format=
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Number of spaces of indent required inside a hanging  or continued line.
-indent-after-paren=4
-
-# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
-# tab).
-indent-string='  '
-
-# Maximum number of characters on a single line.
-max-line-length=100
-
-# Maximum number of lines in a module
-max-module-lines=1000
-
-# List of optional constructs for which whitespace checking is disabled. `dict-
-# separator` is used to allow tabulation in dicts, etc.: {1  : 1,\n222: 2}.
-# `trailing-comma` allows a space between comma and closing bracket: (a, ).
-# `empty-line` allows space-only lines.
-no-space-check=trailing-comma,
-               dict-separator
-
-# Allow the body of a class to be on the same line as the declaration if body
-# contains single statement.
-single-line-class-stmt=no
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-
-[BASIC]
-
-# Naming style matching correct argument names
-argument-naming-style=snake_case
-
-# Regular expression matching correct argument names. Overrides argument-
-# naming-style
-#argument-rgx=
-
-# Naming style matching correct attribute names
-attr-naming-style=snake_case
-
-# Regular expression matching correct attribute names. Overrides attr-naming-
-# style
-#attr-rgx=
-
-# Bad variable names which should always be refused, separated by a comma
-bad-names=foo,
-          bar,
-          baz,
-          toto,
-          tutu,
-          tata
-
-# Naming style matching correct class attribute names
-class-attribute-naming-style=any
-
-# Regular expression matching correct class attribute names. Overrides class-
-# attribute-naming-style
-#class-attribute-rgx=
-
-# Naming style matching correct class names
-class-naming-style=PascalCase
-
-# Regular expression matching correct class names. Overrides class-naming-style
-#class-rgx=
-
-# Naming style matching correct constant names
-const-naming-style=UPPER_CASE
-
-# Regular expression matching correct constant names. Overrides const-naming-
-# style
-#const-rgx=
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-# Naming style matching correct function names
-function-naming-style=snake_case
-
-# Regular expression matching correct function names. Overrides function-
-# naming-style
-#function-rgx=
-
-# Good variable names which should always be accepted, separated by a comma
-good-names=i,
-           j,
-           k,
-           ex,
-           Run,
-           _
-
-# Include a hint for the correct naming format with invalid-name
-include-naming-hint=no
-
-# Naming style matching correct inline iteration names
-inlinevar-naming-style=any
-
-# Regular expression matching correct inline iteration names. Overrides
-# inlinevar-naming-style
-#inlinevar-rgx=
-
-# Naming style matching correct method names
-method-naming-style=snake_case
-
-# Regular expression matching correct method names. Overrides method-naming-
-# style
-#method-rgx=
-
-# Naming style matching correct module names
-module-naming-style=snake_case
-
-# Regular expression matching correct module names. Overrides module-naming-
-# style
-#module-rgx=
-
-# Colon-delimited sets of names that determine each other's naming style when
-# the name regexes allow several styles.
-name-group=
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=^_
-
-# List of decorators that produce properties, such as abc.abstractproperty. Add
-# to this list to register other decorators that produce valid properties.
-property-classes=abc.abstractproperty
-
-# Naming style matching correct variable names
-variable-naming-style=snake_case
-
-# Regular expression matching correct variable names. Overrides variable-
-# naming-style
-#variable-rgx=
-
-
-[DESIGN]
-
-# Maximum number of arguments for function / method
-max-args=5
-
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
-
-# Maximum number of boolean expressions in a if statement
-max-bool-expr=5
-
-# Maximum number of branch for function / method body
-max-branches=12
-
-# Maximum number of locals for function / method body
-max-locals=15
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-# Maximum number of return / yield for function / method body
-max-returns=6
-
-# Maximum number of statements in function / method body
-max-statements=50
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
-
-
-[CLASSES]
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,
-                      __new__,
-                      setUp
-
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,
-                  _fields,
-                  _replace,
-                  _source,
-                  _make
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=mcs
-
-
-[IMPORTS]
-
-# Allow wildcard imports from modules that define __all__.
-allow-wildcard-with-all=no
-
-# Analyse import fallback blocks. This can be used to support both Python 2 and
-# 3 compatible code, which means that the block might have code that exists
-# only in one or another interpreter, leading to false positives when analysed.
-analyse-fallback-blocks=no
-
-# Deprecated modules which should not be used, separated by a comma
-deprecated-modules=regsub,
-                   TERMIOS,
-                   Bastion,
-                   rexec
-
-# Create a graph of external dependencies in the given file (report RP0402 must
-# not be disabled)
-ext-import-graph=
-
-# Create a graph of every (i.e. internal and external) dependencies in the
-# given file (report RP0402 must not be disabled)
-import-graph=
-
-# Create a graph of internal dependencies in the given file (report RP0402 must
-# not be disabled)
-int-import-graph=
-
-# Force import order to recognize a module as part of the standard
-# compatibility libraries.
-known-standard-library=
-
-# Force import order to recognize a module as part of a third party library.
-known-third-party=enchant
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when being caught. Defaults to
-# "Exception"
-overgeneral-exceptions=Exception
@@ -1,7 +0,0 @@
-sudo: required
-
-services:
-  - docker
-
-script:
-  - ./run_docker_tests.sh
@@ -0,0 +1,447 @@
+dragonpilot 0.7.6.1
+========================
+* 基於最新 openpilot 0.7.6.1 devel.
+* Based on latest openpilot 0.7.6.1 devel.
+* 優化並整合 dp 服務。 (所有的設定檔已改名，請重新設定所有的功能)
+* Optimized and integrated several dp services. (Settings have been renamed, please re-config all settings)
+* 完全關閉 steer ratio learner。
+* Completely disabled steer ratio learner.
+* 移除「加速模式」。
+* Removed Accel Profile.
+* 加入本田皓影混電版指紋v1。(感謝 @劉駿)
+* Added Honda Breeze Hybrid FPv1. (Thanks to @劉駿)
+* 加入台灣版 Toyota Prius 4.5 指紋v1。(感謝 @jeekid)
+* Added Taiwan Toyota Prius 4.5 FPv1. (Thanks to @jeekid)
+
+dragonpilot 0.7.5.4
+========================
+* Dynamic Follow 更新模型。(感謝 @ShaneSmiskol 提供代碼、 @cgw1968 測試)
+* Updated Dynamic Follow model. (Special Thanks to @ShaneSmiskol for the feature and @cgw1968 for testing)
+
+dragonpilot 0.7.5.3
+========================
+* Dynamic Follow 更新至 ShaneSmiskol:stock_additions 0.7.5 版。(感謝 @ShaneSmiskol 提供代碼、 @Wei 測試)
+* Updated Dynamic Follow to ShaneSmiskol:stock_additions 0.7.5. (Special Thanks to @ShaneSmiskol for the feature and @Wei for testing)
+* 優化 Lexus GSH 轉向。(感謝 @簡銘佑 測試)
+* Optimize Lexus GSH steering. (Thanks to @簡銘佑)
+* C2 支援自動關機「DragonAutoShutdownAt」參數。(感謝 @cgw1968 建議)
+* C2 to support auto shutdown "DragonAutoShutDownAt" param. (Thanks to @cgw1968)
+* 修正出現「pedalPressed」的錯誤。(感謝 @Wei 回報)
+* Fixed issue showing "pedalPressed" error. (Thanks to @Wei) 
+* 將剎車狀熊顯示於 dp 資訊欄。
+* Added brake indicator to dp infobar.
+* 修正「溫度監控」燈示。
+* Fixed "Temp monitor" indicator.
+* 加入「方向燈取消控制」延遲控制設。(感謝 @wabes 建議)
+* Added delay config to "Disable Lat Control on Blinker". (Thanks to @wabes)
+* 加入巴西版 2020 Corolla Hybrid 指紋v2。(感謝 @berno22 提供)
+* Added Brazil 2020 Corolla Hybrid FPv2. (Thanks to @berno22) 
+
+dragonpilot 0.7.5.2
+========================
+* 加入對 VW MQB/PQ 的支援。(感謝 @dingliangxue 移植)
+* Added support to VW MQB/PQ platform. (Thanks to @dingliangxue)
+* 修改成 3 小時後停止供電。(感謝 @Wei 建議)
+* Updated to stop charging after 3 hrs. (Thanks to @Wei)
+* 移除行車記錄下的「碰撞偵測」功能。
+* Removed Impact Detection in Dashcam.
+* 修正開啟「Noctua 風扇」模式導致的錯誤。(感謝 @阿濤 回報)
+* Fixed a bug caused by enabling "Noctua Mod". (Thanks to @阿濤)
+* 修正「位智模式」無法顯示警示的問題。(感謝 @axandres 回報)
+* Fixed alert issue in waze mode. (Thanks to @axandres)
+* 修正無法顯示更新中圖示的問題。
+* Fixed unable to display "UPDATING" icon issue. 
+* 加入「允許多次自動換道」功能。(感謝 @阿濤 建議)
+* Added "Allow Continuous Auto Lane Change" Toggle. (Thanks to @阿濤)
+* 修正開機後設定頁面有時會錯誤的問題。(感謝 @salmankhan、@Wei 回報)
+* Fixed setting page crash issue. (Thanks to @salmankhan, @Wei)
+* 修正熄火後一直出現更新訊息的錯誤。(感謝 @Sky Chang 回報)
+* Fixed issue that keep showing update prompt. (Thanks to @Sky Chang)
+
+dragonpilot 0.7.5.1
+========================
+* 修正因同時使用「社群功能」和「自定車型」造成的加減速問題。(特別感謝 @Wei、@Sky Chang、@Han9365、@鄧育林 的測試以及回報。)
+* Fixed acceleration issue caused by used of both "Community Maintain Feature" and "Custom Car Model". (Special Thanks to @Wei, @Sky Chang, @Han9365, @鄧育林)
+* 新增 DragonMaxSpeedLimit 設定值 (mph)，當如果車速高於此值 op 將會停止操控。(感謝 @Anthony 建議)
+* Added DragonMaxSpeedLimit parameter (mph), op will stop controlling when car speed is high than the value. (Thanks to @Anthony)
+* 更新 appd 使用 cnpmjs 來下載 APKs。
+* Updated appd to use cnpmjs to download APKs.
+* 修正更新服務。(感謝 @Wei)
+* Fixed Update Service. (Thanks to @Wei)
+* 新增加拿大版 2018 Toyota Sienna LTD 指紋(v2)。(感謝 明峰 提供)
+* Added Canada 2018 Toyota Sienna LTD fingerprint (v2). (Thanks to 明峰)
+* 新增「通過移動網路上傳」開關
+* Added Upload Over Mobile Network toggle.
+* 新增「通過熱點上傳」開關
+* Added Upload Over Hotspot toggle.
+* 新增加拿大版 2018 Toyota Sienna LTD 指紋(v1)。(感謝 明峰 提供)
+* Added Canada 2018 Toyota Sienna LTD fingerprint (v1). (Thanks to 明峰)
+* 新增大陸版 Volkswagen Golf GTI 指紋 (v1)。(感謝 easyeiji 提供)
+* Added China Volkswagen Golf GTI fingerprint (v1). (Thanks to easyeiji)
+
+dragonpilot 0.7.5.0
+========================
+* 基於最新 openpilot 0.7.5 devel-staging.
+* Based on latest openpilot 0.7.5 devel-staging.
+* 更新 dp 圖示 (特別感謝 @wabes 的設計與提供)。
+* Updated dp logo, special thanks to @wabes for the design.
+* 簡/繁中文版和 i18n 整合成為單一版本。  
+* Merged zhs/zht/i18n versions into one.
+* 新增大陸版 CAMRY HYBRID 指紋v2。(感謝 @杜子腾)
+* Added China Camery Hybrid FPv2. (Thanks to @杜子腾) 
+* 新增台灣版 Altis HYBRID 指紋v1。(感謝 @Fish)
+* Added Taiwan Altis Hybrid FPv1. (Thanks to @Fish)
+* 新增行駛時關閉畫面功能。
+* Added Screen off while driving feature.
+* 新增倒車時關閉畫面功能。
+* Added Screen off while reversing feature.
+* 新增駕駛介面加入「加速模式」切換鈕。 
+* Added acceleration profile toggle onto driving UI.
+* 新增自定車型功能，取代指紋暫存功能。
+* Replaced fingerprint cache with custom car model selector.
+* 新增可調亮度。
+* Added Brightness changer.
+* 新增部分德語支持。(特別感謝 @arne182 提供)
+* Added partial de_DE language support (Thanks to @arne182)
+* 新增停車碰撞偵測記錄功能。
+* Added off road impact detection to dashcam.
+
+2020-05-06
+========================
+* 更新 dp 圖示 (特別感謝 @wabes 的設計與提供)。
+* 中文版整合進 i18n 版。  
+* 刪除指紋暫存功能。
+* 新增 CAMERY HIBRID 指紋。(感謝 @杜子腾)
+* 新增行駛時關閉畫面功能。
+* 新增倒車時關閉畫面功能。
+* 新增駕駛介面加入「加速模式」切換鈕。 
+* 新增自定義車型。
+
+2020-04-16
+========================
+* [DEVEL] 加入台灣版 2016 Lexus IS200t 指紋。(感謝 Philip / Cody Dai)
+* [DEVEL] 加入台灣版 2016 Toyota Prius 4.5 代指紋。(感謝 Philip)
+* [DEVEL] 加入台灣版 201x Toyota RAV4 4WD 指紋。(感謝 Philip)
+* [DEVEL] 加入台灣版 2020 Toyota Auris w/ LTA 指紋。(感謝 Philip)
+* [DEVEL] 修正 commIssue 錯誤。(感謝 Kent 協助)
+
+2020-04-13
+========================
+* [DEVEL] 加入可調整 Toyota Sng 起步反應值 (DragonToyotaSngResponse)。 (特別感謝 @Wei 提供 PR)
+* [DEVEL] 駕駛介面加入「動態調整車距」按鈕。(感謝 @cgw1968-5779 建議)
+* [DEVEL] 更新 update script。(感謝 深鯨希西 回報)
+
+2020-04-10
+========================
+* [DEVEL] 更新 panda 至最新的 comma:master 分支。
+* [DEVEL] 移除所有的第三方應用改為自動下載。
+* [DEVEL] 移除「啟用原廠 DSU 模式」、「安全帶檢查」、「車門檢查」開關。
+
+2020-03-31
+========================
+* [DEVEL] 更新至 2020-03-31 testing 分支。
+
+2020-03-27
+========================
+* [DEVEL] 更新至最新的 testing 分支:
+  * 加入波蘭版 2015 Lexus NX200T 支援。(感謝 wabes 提供)
+  * 調整「啟用原廠 DSU 模式」為不再需要 AHB 。(Enable Stock DSU Mode no longer requires "AHB" toggle)
+  * 加入「安全帶檢查」、「車門檢查」、「檔位檢查」、「溫度檢查」開關。
+  * 加入曲率學習功能 - Curvature Learner 。(感謝 zorrobyte 提供)
+  * 加入大陸版 2018 Toyota Highlander 支援。(感謝 toyboxZ 提供)
+  * 加入大陸版 2018 Toyota Camry 2.0 支援。(感謝 Rming 提供)
+  * 加入韓文支持。(感謝 crwusiz 提供)
+  * 調整 OFFROAD 主頁翻譯將 "dragonpilot" 改回 "openpilot"。
+
+2020-03-22
+========================
+* [DEVEL] 更新至最新的 testing 分支。
+
+2020-03-17
+========================
+* [DEVEL] 更新至最新的 testing 分支 (commaai:devel-staging 0.7.4)。
+* [DEVEL] 加入動態調整車距功能。(特別感謝 @ShaneSmiskol 提供 PR)
+
+2020-03-14
+========================
+* [DEVEL] 更新 pt-Br (葡萄牙語) 翻譯。(感謝 berno22 提供)
+* [DEVEL] 加入自動關機開關。(感謝 Rzxd 建議)
+* [DEVEL] 調高 Toyota 扭力容錯值。
+* [DEVEL] 優化讀取 dp 設定值。
+* [DEVEL] 加入 2019 手動 Civic 指紋。感謝 (AlexNoop 提供)
+* [DEVEL] dp 功能加入對 Subaru 車系的支援。
+
+2020-03-06
+========================
+* [DEVEL] 加入葡萄牙語支持。(感謝 berno22 提供)
+* [DEVEL] 加入大陸 2018 Camry、2020 RAV4 指紋。(感謝 笨木匠 提供)
+* [DEVEL] 建立 devel-i18n 取代 devel-en。
+* [DEVEL] devel-en is deprecated, please switch to devel-i18n instead.
+
+2020-03-04
+========================
+* [DEVEL] 加入顯示駕駛監控畫面。
+* [DEVEL] 加入加速模式選項。(特別感謝 @arne182, @cgw1968-5779 提供 PR)
+* [DEVEL] 修正 shutdownd 在 comma two 可能會不正常關機的錯誤。(感謝 @Wei, @Rzxd 回報)
+
+2020-02-25
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.3)。
+
+2020-02-21
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.3)。
+
+2020-02-14
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.2)。
+* [DEVEL] 修正錯誤。
+
+2020-02-08
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.2)。
+* [DEVEL] dp 功能加入對現代 (Hyundai) 車系的支援。
+* [DEVEL] 加入神盾測速照相自動啟動的開關。
+* [DEVEL] 更新高德地圖至 v4.5.0.600053。
+* [DEVEL] 使用 0.6.6 版的更新系統。
+* [DEVEL] 修正急剎問題。(感謝 kumar 提供)
+
+2020-01-31
+========================
+* [DEVEL] 移除行車介面電量、溫度顯示，(修正畫面當機、黑屏問題)
+
+2020-01-29
+========================
+* [DEVEL] 修正行車介面錯誤。(感謝 深鲸希西 測試；eisenheim、HeatNation 反應)
+
+2020-01-23
+========================
+* [DEVEL] 加入 Steer Ratio Learner 關閉。(感謝 eisenheim 建議)
+* [DEVEL] 行車介面加入電量、溫度。(感謝 eisenheim 建議)
+* [DEVEL] 優化 appd。
+
+2020-01-19
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.1)。
+* [DEVEL] 調整 appd 和 ALC 邏輯。 
+
+2020-01-14
+========================
+* [DEVEL] 加入開機啟動個人熱點。(感謝 eisenheim 建議)
+
+2020-01-08
+========================
+* [DEVEL] 加入大陸版 2018 Lexus RX300 支援。(感謝 cafe 提供)
+* [DEVEL] 加入 DragonBTG 設定。(感謝 CloudJ、低調哥、歐姓Altis車主 提供)
+
+2019-12-31
+========================
+* [DEVEL-ZHS] 加回第三方應用。
+
+2019-12-29
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.0)。
+* [DEVEL] 輔助/自動變道改為可調整參數 (進階用戶)。(DragonAssistedLCMinMPH、DragonAutoLCMinMPH、DragonAutoLCDelay)
+* [DEVEL-ZHS] 修正無法運行第三方應用錯誤。(感謝 深鲸希西 反應)
+
+2019-12-18
+========================
+* [DEVEL] 修正自動換道邏輯。
+* [DEVEL] 更新 offroad 翻譯。
+* [DEVEL] 錯誤修正。
+* [DEVEL] 移除美版 2017 Civic Hatchback 指紋。(與其它車型衝突)
+
+2019-12-17
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.0)。
+* [DEVEL] 加入輔助換道開關。（24mph / 40kph 以上)
+* [DEVEL] 加入自動換道開關。（40mph / 65kph 以上)
+* [DEVEL] 加入大陸版 2019 雷凌汽油版指紋。 (感謝 Shell 提供)
+* [DEVEL] 加入大陸版 2019 卡羅拉汽油版指紋。 (感謝 Shell 提供)
+* [DEVEL] 加入美版 2017 Civic Hatchback 指紋。(感謝 CFranHonda 提供)
+
+2019-12-10
+========================
+* [DEVEL] 加入位智車機模式。 (Waze Mode)
+
+2019-11-21
+========================
+* [DEVEL] 修正 offroad 翻譯。(感謝 鄧育林 回報)
+* [DEVEL] 調整前車靜止移動偵測參數。
+* [DEVEL] 前車靜止移動偵測可在未啟用 dp 時運作。
+
+2019-11-18
+========================
+* [DEVEL] 修正 offroad 翻譯。(感謝 Cody、鄧育林 回報)
+
+2019-11-18
+========================
+* [DEVEL] 修正 frame 翻譯。
+
+2019-11-15
+========================
+* [DEVEL] 修正不會充電的錯誤。 (感謝 袁昊 反應)
+
+2019-11-15
+========================
+* [DEVEL] 修正充電控制。 (感謝 KT 反應)
+* [DEVEL] 更新 frame 翻譯，改為多語言版。 (感謝 深鲸希西、shaoching885、鄧育林 反應)
+* [DEVEL] 更新至最新的 commaai:devel (0.6.6)。
+
+2019-11-12
+========================
+* [DEVEL] 只顯示電量文字 (注意：有時不會更新，需要拔插 USB 線)
+* [DEVEL] 自動偵測並鎖定硬體 (EON / UNO)。
+
+2019-11-12
+========================
+* [DEVEL] 加入鎖定硬體 (EON / UNO) 的程式碼。
+
+2019-11-11
+========================
+* [DEVEL] 更新高德地圖至 v4.3.0.600310 R2098NSLAE
+* [DEVEL] 更新 MiXplorer 至 v6.40.3
+* [DEVEL] 更新至最新的 commaai:devel (0.6.6)。
+* [DEVEL] 前車靜止移動偵測加入偵測警示。
+
+2019-11-07
+========================
+* [DEVEL] 讓 Bosch 系統顯示三角。 (感謝 ching885 回報)
+* [DEVEL] 更新 offroad 多語言版簡體中文翻譯 (感謝 Rming 提供)
+
+2019-11-06
+========================
+* [DEVEL] 修正 0.6.6 appd 和 dashcamd 錯誤。 (感謝 鄧育林 回報)
+* [DEVEL] 更新至最新的 commaai:devel (0.6.6)。
+
+2019-11-05
+========================
+* [DEVEL] 加入台灣 Lexus 2017 GS450h 支援。 (感謝 簡銘佑 提供指紋)
+
+2019-11-01
+========================
+* [DEVEL] 新增神盾測速照相。 (感謝 Sky Chang 和 Wei Yi Chen)
+* [DEVEL] 修正 offroad 翻譯。 (感謝 Leo Hsieh)
+
+2019-11-01
+========================
+* [DEVEL] 移除 Miui 字型，縮小 dp 使用空間。
+* [DEVEL] 更新 offroad 為多語言版
+* [DEVEL] 更新至最新的 commaai:devel (0.6.5)。
+
+2019-10-29
+========================
+* [DEVEL] 加入 SnG 補丁。（感謝 楊雅智)
+
+2019-10-28
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.6.5)。
+* [DEVEL] 調整 dragon_allow_gas 邏輯 (請回報任何問題，需更新 Panda 韌體)
+
+2019-10-18
+========================
+* [DEVEL] 加入前車靜止移動偵測。(測試版，感謝 ucolchen)
+* [DEVEL] 移除強迫網路連線提示。(感謝 Shell)
+* [DEVEL] 修正 allow_gas 功能。
+
+2019-10-18
+========================
+* [DEVEL] 加入彎道減速功能開關。
+* [DEVEL] 強迫使用 dp 版 Panda 韌體。
+* [DEVEL] 更新至最新的 commaai:devel (0.6.5)。 
+
+2019-10-17
+========================
+* [DEVEL] 加入「車型」顯示於 dp 設定畫面。
+* [DEVEL] 修正充電控制讀取預設值的錯誤。
+* [DEVEL] 修正無法顯示更新記錄的錯誤。
+
+2019-10-16
+========================
+* [DEVEL] 刷新 Panda 韌體按鈕將會自動重啟 EON。(感謝 鄧育林 建議)
+* [DEVEL] 下載更新記錄時使用 "no-cache" 標頭。
+* [DEVEL] 更新高德地圖至 v4.3.0
+* [DEVEL] 刪除 bs (Branch Switcher)
+
+2019-10-14
+========================
+* [DEVEL] 啟用自動更新功能。(感謝 鄧育林 提供)
+* [DEVEL] 清除不再使用的 dp params。
+* [DEVEL] 加入數字電量指示。(感謝 鄧育林 建議)
+* [DEVEL] 加入刷新 Panda 韌體按鈕。
+
+2019-10-11
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.6.5)。 
+* [DEVEL] 加入台灣 2019 RAV4 汽油版指紋。 (感謝 Max Duan / CloudJ 提供)
+
+2019-10-09
+========================
+* [DEVEL] 加入當 LatCtrl 關閉時，畫面顯示提示訊息。
+
+2019-10-08
+========================
+* [DEVEL] 加回駕駛監控開關。
+* [DEVEL] 加入 bs (branch switcher) 程式。
+
+2019-10-07
+========================
+* [DEVEL] 加入台灣版 2019 RAV4H 油電版指紋。(感謝 Max Duan 提供)
+
+2019-10-05
+========================
+* [DEVEL] 移除 curvature learner: 轉角明顯比原廠小。
+* [DEVEL] 更新至最新的 commaai:devel (0.6.4)。 
+
+2019-09-30
+========================
+* [DEVEL] 更新 curvature learner 版本至 v4。
+* [DEVEL] Lexus ISH 使用更精確的 EPS Steering Angle Sensor 
+
+2019-09-27
+========================
+* [DEVEL] 加入 Zorrobyte 的 curvature learner (https://github.com/zorrobyte/openpilot)
+* [DEVEL] 加入可開關駕駛監控的程式碼。
+* [DEVEL] 取消當 steering 出現錯誤時，自動切斷方向控制 2 秒的機制。
+* [DEVEL] 讓行車介面的「方向盤」/「轉彎」圖示半透明化。
+
+2019-09-26
+========================
+* [DEVEL] 修正當「啟用記錄服務」關閉時，make 會有問題的錯誤。 (感謝 shaoching885 和 afa 回報)
+
+2019-09-24
+========================
+* [DEVEL] 行車介面加入可開關的「前車」、「路線」、「車道」設定。
+* [DEVEL] 行車介面加入可開關的「方向燈號」提示。 (感謝 CloudJ 建議，程式碼來源: https://github.com/kegman/openpilot)
+
+2019-09-23
+========================
+* [DEVEL] 優化讀取 params 的次數。
+* [DEVEL] 加入可開關的車道偏移警示。
+* [DEVEL] 修正充電控制邏輯。
+* [DEVEL] 加入台灣 Prius 4.5 指紋。 (感謝 Lin Hsin Hung 提供)
+
+2019-09-20
+========================
+* [DEVEL] 加入充電控制功能。 (感謝 loveloveses 和 KT 建議)
+
+2019-09-16
+========================
+* [DEVEL] 加入台灣 CT200h 指紋。 (感謝 CloudJ 提供)
+* [DEVEL] 加入美版 CT200h 移植。 (感謝 thomaspich 提供)
+
+2019-09-13
+========================
+* [DEVEL] 行車介面加入可開關的「速度顯示」設定。
+
+2019-09-09
+========================
+* [DEVEL] 加入 GreyPanda 模式。
+
+2019-08-28
+========================
+* [DEVEL] 加入可調警示音量。
+
+2019-08-27
+========================
+* [DEVEL] 自動關機改為可調時長。
@@ -0,0 +1,193 @@
+dragonpilot 0.7.5
+========================
+* 優化 Lexus GSH 轉向。(感謝 @簡銘佑 測試)
+* Optimize Lexus GSH steering. (Thanks to @簡銘佑)
+* C2 支援自動關機「DragonAutoShutdownAt」參數。(感謝 @cgw1968 建議)
+* C2 to support auto shutdown "DragonAutoShutDownAt" param. (Thanks to @cgw1968)
+* 將剎車狀熊顯示於 dp 資訊欄。
+* Added brake indicator to dp infobar.
+* 加入「方向燈取消控制」延遲控制設。(感謝 @wabes 建議)
+* Added delay config to "Disable Lat Control on Blinker". (Thanks to @wabes)
+* 加入巴西版 2020 Corolla Hybrid 指紋v2。(感謝 @berno22 提供)
+* Added Brazil 2020 Corolla Hybrid FPv2. (Thanks to @berno22) 
+* 加入對 VW MQB/PQ 的支援。(感謝 @dingliangxue 移植)
+* Added support to VW MQB/PQ platform. (Thanks to @dingliangxue)
+* 加入「允許多次自動換道」功能。(感謝 @阿濤 建議)
+* Added "Allow Continuous Auto Lane Change" Toggle. (Thanks to @阿濤)
+* 新增 DragonMaxSpeedLimit 設定值 (mph)，當如果車速高於此值 op 將會停止操控。(感謝 @Anthony 建議)
+* Added DragonMaxSpeedLimit parameter (mph), op will stop controlling when car speed is high than the value. (Thanks to @Anthony)
+* 新增加拿大版 2018 Toyota Sienna LTD 指紋(v2)。(感謝 明峰 提供)
+* Added Canada 2018 Toyota Sienna LTD fingerprint (v2). (Thanks to 明峰)
+* 新增「通過移動網路上傳」開關
+* Added Upload Over Mobile Network toggle.
+* 新增「通過熱點上傳」開關
+* Added Upload Over Hotspot toggle.
+* 新增加拿大版 2018 Toyota Sienna LTD 指紋(v1)。(感謝 明峰 提供)
+* Added Canada 2018 Toyota Sienna LTD fingerprint (v1). (Thanks to 明峰)
+* 新增大陸版 Volkswagen Golf GTI 指紋 (v1)。(感謝 easyeiji 提供)
+* Added China Volkswagen Golf GTI fingerprint (v1). (Thanks to easyeiji)
+* 更新 dp 圖示 (特別感謝 @wabes 的設計與提供)。
+* Updated dp logo, special thanks to @wabes for the design.
+* 簡/繁中文版和 i18n 整合成為單一版本。  
+* Merged zhs/zht/i18n versions into one.
+* 新增大陸版 CAMRY HYBRID 指紋v2。(感謝 @杜子腾)
+* Added China Camery Hybrid FPv2. (Thanks to @杜子腾) 
+* 新增台灣版 Altis HYBRID 指紋v1。(感謝 @Fish)
+* Added Taiwan Altis Hybrid FPv1. (Thanks to @Fish)
+* 新增行駛時關閉畫面功能。
+* Added Screen off while driving feature.
+* 新增倒車時關閉畫面功能。
+* Added Screen off while reversing feature.
+* 新增駕駛介面加入「加速模式」切換鈕。 
+* Added acceleration profile toggle onto driving UI.
+* 新增自定車型功能，取代指紋暫存功能。
+* Replaced fingerprint cache with custom car model selector.
+* 新增可調亮度。
+* Added Brightness changer.
+* 新增部分德語支持。(特別感謝 @arne182 提供)
+* Added partial de_DE language support (Thanks to @arne182)
+
+dragonpilot 0.7.4
+========================
+* [2020-04-10] 移除所有的第三方應用改為自動下載。
+* [2020-04-10] 移除「啟用原廠 DSU 模式」、「安全帶檢查」、「車門檢查」開關。
+* [2020-03-31] 還原部分修改代碼以達到 comma ai 安全準則。 (Reverted changes to panda safety code to comply with comma ai safety guideline.)
+* [2020-03-31] 調整「啟用原廠 DSU 模式」為踩剎車時會暫時斷開控制 。(Enable Stock DSU Mode will temporary disable controls when brake is pressed.)
+* [2020-03-27] 加入波蘭版 2015 Lexus NX200T 支援。(感謝 wabes 提供)
+* [2020-03-27] 調整「啟用原廠 DSU 模式」為不再需要 AHB 。(Enable Stock DSU Mode no longer requires "AHB" toggle)
+* [2020-03-27] 加入「安全帶檢查」、「車門檢查」、「檔位檢查」、「溫度檢查」開關。
+* [2020-03-27] 加入曲率學習功能 - Curvature Learner 。(感謝 zorrobyte 提供)
+* [2020-03-27] 加入大陸版 2018 Toyota Highlander 支援。(感謝 toyboxZ 提供)
+* [2020-03-27] 加入大陸版 2018 Toyota Camry 2.0 支援。(感謝 Rming 提供)
+* [2020-03-27] 加入韓文支持。(感謝 crwusiz 提供)
+* [2020-03-27] 調整 OFFROAD 主頁翻譯將 "dragonpilot" 改回 "openpilot"。
+
+dragonpilot 0.7.3
+========================
+* [2020-03-17] 加入動態調整車距功能。(特別感謝 @ShaneSmiskol 提供 PR)
+* [2020-03-14] 更新 pt-Br (葡萄牙語) 翻譯。(感謝 berno22 提供)
+* [2020-03-14] 加入自動關機開關。(感謝 Rzxd 建議)
+* [2020-03-14] 調高 Toyota 扭力容錯值。
+* [2020-03-14] 優化讀取 dp 設定值。
+* [2020-03-14] 加入 2019 手動 Civic 指紋。感謝 (AlexNoop 提供)
+* [2020-03-14] dp 功能加入對 Subaru 車系的支援。
+* [2020-03-06] 加入葡萄牙語支持。(感謝 berno22 提供)
+* [2020-03-06] 加入大陸 2018 Camry、2020 RAV4 指紋。(感謝 笨木匠 提供)
+* [2020-03-04] 加入顯示駕駛監控畫面。
+* [2020-03-04] 加入加速模式選項。(特別感謝 @arne182, @cgw1968-5779 提供 PR)
+* [2020-03-04] 修正 shutdownd 在 comma two 可能會不正常關機的錯誤。(感謝 @Wei, @Rzxd 回報)
+
+dragonpilot 0.7.2
+========================
+* [2020-02-08] dp 功能加入對現代 (Hyundai) 車系的支援。
+* [2020-02-08] 加入神盾測速照相自動啟動的開關。
+* [2020-02-08] 更新高德地圖至 v4.5.0.600053。
+* [2020-02-08] 使用 0.6.6 版的更新系統。
+* [2020-02-08] 修正急剎問題。(感謝 kumar 提供)
+* [2020-01-31] 移除行車介面電量、溫度顯示，(修正畫面當機、黑屏問題)
+* [2020-01-29] 修正行車介面錯誤。(感謝 深鲸希西 測試；eisenheim、HeatNation 反應)
+* [2020-01-23] 加入 Steer Ratio Learner 關閉。(感謝 eisenheim 建議)
+* [2020-01-23] 行車介面加入電量、溫度。(感謝 eisenheim 建議)
+* [2020-01-23] 優化 appd。
+
+dragonpilot 0.7.1
+========================
+* [2020-01-19] 調整 appd 和 ALC 邏輯。 
+* [2020-01-14] 加入開機啟動個人熱點。(感謝 eisenheim 建議)
+* [2020-01-18] 加入大陸版 2018 Lexus RX300 支援。(感謝 cafe 提供)
+* [2020-01-18] 加入 DragonBTG 設定。(感謝 CloudJ、低調哥、歐姓Altis車主 提供)
+
+dragonpilot 0.7.0
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.0)。
+* [2019-12-29] 輔助/自動變道改為可調整參數 (進階用戶)。(DragonAssistedLCMinMPH、DragonAutoLCMinMPH、DragonAutoLCDelay)
+* [2019-12-29] 修正無法運行第三方應用錯誤。(感謝 深鲸希西 反應)
+* [2019-12-18] 修正自動換道邏輯。
+* [2019-12-18] 更新 offroad 翻譯。
+* [2019-12-18] 錯誤修正。
+* [2019-12-18] 移除美版 2017 Civic Hatchback 指紋。(與其它車型衝突)
+* [2019-12-17] 加入輔助換道開關。（24mph / 40kph 以上)
+* [2019-12-17] 加入自動換道開關。（40mph / 65kph 以上)
+* [2019-12-17] 加入大陸版 2019 雷凌汽油版指紋。 (感謝 Shell 提供)
+* [2019-12-17] 加入大陸版 2019 卡羅拉汽油版指紋。 (感謝 Shell 提供)
+* [2019-12-17] 加入美版 2017 Civic Hatchback 指紋。(感謝 CFranHonda 提供)
+* [2019-12-10] 加入位智車機模式。 (Waze Mode)
+* [2019-11-21] 修正 offroad 翻譯。(感謝 鄧育林 回報)
+* [2019-11-21] 調整前車靜止移動偵測參數。
+* [2019-11-21] 前車靜止移動偵測可在未啟用 dp 時運作。
+* [2019-11-18] 修正 offroad 翻譯。(感謝 Cody、鄧育林 回報)
+* [2019-11-18] 修正 frame 翻譯。
+
+dragonpilot 0.6.6
+========================
+* [2019-11-15] 修正不會充電的錯誤。 (感謝 袁昊 反應)
+* [2019-11-15] 修正充電控制。 (感謝 KT 反應)
+* [2019-11-15] 更新 frame 翻譯，改為多語言版。 (感謝 深鲸希西、shaoching885、鄧育林 反應)
+* [2019-11-12] 只顯示電量文字 (注意：有時不會更新，需要拔插 USB 線)
+* [2019-11-12] 自動偵測並鎖定硬體 (EON / UNO)。
+* [2019-11-12] 加入鎖定硬體 (EON / UNO) 的程式碼。
+* [2019-11-11] 更新高德地圖至 v4.3.0.600310 R2098NSLAE
+* [2019-11-11] 更新 MiXplorer 至 v6.40.3
+* [2019-11-11] 前車靜止移動偵測加入偵測警示。
+* [2019-11-07] 讓 Bosch 系統顯示三角。 (感謝 ching885 回報)
+* [2019-11-07] 更新 offroad 多語言版簡體中文翻譯 (感謝 Rming 提供)
+* [2019-11-06] 修正 0.6.6 appd 和 dashcamd 錯誤。 (感謝 鄧育林 回報)
+
+dragonpilot 0.6.5
+========================
+* [2019-11-05] 加入台灣 Lexus 2017 GS450h 支援。 (感謝 簡銘佑 提供指紋)
+* [2019-11-01] 新增神盾測速照相。 (感謝 Sky Chang 和 Wei Yi Chen)
+* [2019-11-01] 修正 offroad 翻譯。 (感謝 Leo Hsieh)
+* [2019-11-01] 移除 Miui 字型，縮小 dp 使用空間。
+* [2019-11-01] 更新 offroad 為多語言版
+* [2019-10-29] 加入 SnG 補丁。（感謝 楊雅智)
+* [2019-10-28] 調整 dragon_allow_gas 邏輯 (請回報任何問題，需更新 Panda 韌體)
+* [2019-10-22] 移除強迫網路連線提示。(感謝 Shell)
+* [2019-10-18] 加入前車靜止移動偵測。(測試版，感謝 ucolchen)
+* [2019-10-18] 移除強迫網路連線提示。(感謝 Shell)
+* [2019-10-18] 修正 allow_gas 功能。
+* [2019-10-18] 加入彎道減速功能開關。
+* [2019-10-18] 強迫使用 dp 版 Panda 韌體。
+* [2019-10-17] 加入「車型」顯示於 dp 設定畫面。
+* [2019-10-17] 修正充電控制讀取預設值的錯誤。
+* [2019-10-17] 修正無法顯示更新記錄的錯誤。
+* [2019-10-17] 刷新 Panda 韌體按鈕將會自動重啟 EON。(感謝 鄧育林 建議)
+* [2019-10-17] 下載更新記錄時使用 "no-cache" 標頭。
+* [2019-10-17] 更新高德地圖至 v4.3.0
+* [2019-10-14] 啟用自動更新功能。(感謝 鄧育林 提供)
+* [2019-10-14] 清除不再使用的 dp params。
+* [2019-10-14] 加入數字電量指示。(感謝 鄧育林 建議)
+* [2019-10-14] 加入刷新 Panda 韌體按鈕。
+* [2019-10-11] 加入台灣 2019 RAV4 汽油版指紋。 (感謝 Max Duan / CloudJ 提供)
+* [2019-10-11] 加入當 LatCtrl 關閉時，畫面顯示提示訊息。
+
+dragonpilot 0.6.4
+========================
+* [2019-10-11] 加入台灣版 2019 RAV4H 油電版指紋。
+* [2019-10-08] 加回駕駛監控開關。
+* [2019-10-07] 加入台灣版 2019 RAV4H 油電版指紋。(感謝 Max Duan 提供)
+* [2019-10-05] 移除 curvature learner: 轉角明顯比原廠小。
+* [2019-09-30] 更新 curvature learner 版本至 v4。
+* [2019-09-30] Lexus ISH 使用更精確的 EPS Steering Angle Sensor 
+* [2019-09-27] 加入 Zorrobyte 的 curvature learner (https://github.com/zorrobyte/openpilot)
+* [2019-09-27] 加入可開關駕駛監控的程式碼。
+* [2019-09-27] 取消當 steering 出現錯誤時，自動切斷方向控制 2 秒的機制。
+* [2019-09-27] 讓行車介面的「方向盤」/「轉彎」圖示半透明化。
+* [2019-09-26] 修正當「啟用記錄服務」關閉時，make 會有問題的錯誤。 (感謝 shaoching885 和 afa 回報)
+* [2019-09-24] 行車介面加入可開關的「前車」、「路線」、「車道」設定。
+* [2019-09-24] 行車介面加入可開關的「方向燈號」提示。 (感謝 CloudJ 建議，程式碼來源: https://github.com/kegman/openpilot)
+* [2019-09-23] 優化讀取 params 的次數。
+* [2019-09-23] 加入可開關的車道偏移警示。
+* [2019-09-23] 修正充電控制邏輯。
+* [2019-09-23] 加入台灣 Prius 4.5 指紋。 (感謝 Lin Hsin Hung 提供)
+* [2019-09-20] 加入充電控制功能。 (感謝 loveloveses 和 KT 建議)
+* [2019-09-16] 加入台灣 CT200h 指紋。 (感謝 CloudJ 提供)
+* [2019-09-16] 加入美版 CT200h 移植。 (感謝 thomaspich 提供)
+* [2019-09-13] 行車介面加入可開關的「速度顯示」設定。
+* [2019-09-09] 加入 GreyPanda 模式。
+* [2019-08-28] 加入可調警示音量。
+* [2019-08-27] 自動關機改為可調時長。
+
+dragonpilot 0.6.3
+========================
+* [2019-10-11] 加入台灣版 2019 RAV4H 油電版指紋。
@@ -0,0 +1,130 @@
+2020-06-22 (0.7.6.1)
+========================
+* 更新至 openpilot 0.7.6.1。 (特別感謝 @rockindy 協助更新)
+* Updated to openpilot 0.7.6.1. (Special thanks to @rockindy for initial merge)
+* 優化並整合 dp 服務。 (所有的設定檔已改名，請重新設定所有的功能)
+* Optimized and integrated several dp services. (Settings have been renamed, please re-config all settings)
+* 完全關閉 steer ratio learner。
+* Completely disabled steer ratio learner.
+* 移除「加速模式」。
+* Removed Accel Profile.
+* 加入本田皓影混電版指紋v1。(感謝 @劉駿)
+* Added Honda Breeze Hybrid FPv1. (Thanks to @劉駿)
+* 加入台灣版 Toyota Prius 4.5 指紋v1。(感謝 @jeekid)
+* Added Taiwan Toyota Prius 4.5 FPv1. (Thanks to @jeekid)
+
+2020-06-18 (0.7.5)
+========================
+* Dynamic Follow 更新模型。(感謝 @ShaneSmiskol 提供代碼、 @cgw1968 測試)
+* Updated Dynamic Follow model. (Special Thanks to @ShaneSmiskol for the feature and @cgw1968 for testing)
+
+2020-05-30 (0.7.5)
+========================
+* Dynamic Follow 更新至 ShaneSmiskol:stock_additions 0.7.5 版。(感謝 @ShaneSmiskol 提供代碼、 @Wei 測試)
+* Updated Dynamic Follow to ShaneSmiskol:stock_additions 0.7.5. (Special Thanks to @ShaneSmiskol for the feature and @Wei for testing)
+
+2020-05-28 (0.7.5)
+========================
+* 優化 Lexus GSH 轉向。(感謝 @簡銘佑 測試)
+* Optimize Lexus GSH steering. (Thanks to @簡銘佑)
+* C2 支援自動關機「DragonAutoShutdownAt」參數。(感謝 @cgw1968 建議)
+* C2 to support auto shutdown "DragonAutoShutDownAt" param. (Thanks to @cgw1968)
+* 修正出現「pedalPressed」的錯誤。(感謝 @Wei 回報)
+* Fixed issue showing "pedalPressed" error. (Thanks to @Wei) 
+
+2020-05-26 (0.7.5)
+========================
+* 將剎車狀熊顯示於 dp 資訊欄。
+* Added brake indicator to dp infobar.
+* 修正「溫度監控」燈示。
+* Fixed "Temp monitor" indicator.
+* 加入「方向燈取消控制」延遲控制設。(感謝 @wabes 建議)
+* Added delay config to "Disable Lat Control on Blinker". (Thanks to @wabes)
+* 加入巴西版 2020 Corolla Hybrid 指紋v2。(感謝 @berno22 提供)
+* Added Brazil 2020 Corolla Hybrid FPv2. (Thanks to @berno22) 
+
+2020-05-25 (0.7.5)
+========================
+* 加入對 VW MQB/PQ 的支援。(感謝 @dingliangxue 移植)
+* Added support to VW MQB/PQ platform. (Thanks to @dingliangxue)
+
+2020-05-21 (0.7.5)
+========================
+* 修改成 3 小時後停止供電。(感謝 @Wei 建議)
+* Updated to stop charging after 3 hrs. (Thanks to @Wei)
+* 移除行車記錄下的「碰撞偵測」功能。
+* Removed Impact Detection in Dashcam.
+* 修正開啟「Noctua 風扇」模式導致的錯誤。(感謝 @阿濤 回報)
+* Fixed a bug caused by enabling "Noctua Mod". (Thanks to @阿濤)
+* 修正「位智模式」無法顯示警示的問題。(感謝 @axandres 回報)
+* Fixed alert issue in waze mode. (Thanks to @axandres)
+* 修正無法顯示更新中圖示的問題。
+* Fixed unable to display "UPDATING" icon issue. 
+
+2020-05-20 (0.7.5)
+========================
+* 加入「允許多次自動換道」功能。(感謝 @阿濤 建議)
+* Added "Allow Continuous Auto Lane Change" Toggle. (Thanks to @阿濤)
+* 修正開機後設定頁面有時會錯誤的問題。(感謝 @salmankhan、@Wei 回報)
+* Fixed setting page crash issue. (Thanks to @salmankhan, @Wei)
+* 修正熄火後一直出現更新訊息的錯誤。(感謝 @Sky Chang 回報)
+* Fixed issue that keep showing update prompt. (Thanks to @Sky Chang)
+
+2020-05-19 (0.7.5)
+========================
+* 加入 DragonEnableAutoUpdate 預設值。
+* Added DragonEnableAutoUpdate default value.
+
+2020-05-18 (0.7.5)
+========================
+* 修正因同時使用「社群功能」和「自定車型」造成的加減速問題。(特別感謝 @Wei、@Sky Chang、@Han9365、@鄧育林 的測試以及回報。)
+* Fixed acceleration issue caused by used of both "Community Maintain Feature" and "Custom Car Model"
+
+2020-05-16 (0.7.5)
+========================
+* 新增 DragonMaxSpeedLimit 設定值 (mph)，當如果車速高於此值 op 將會停止操控。(感謝 @Anthony 建議)
+* Added DragonMaxSpeedLimit parameter (mph), op will stop controlling when car speed is high than the value. (Thanks to @Anthony)
+* 更新 appd 使用 cnpmjs 來下載 APKs。
+* Updated appd to use cnpmjs to download APKs.
+* 修正更新服務。(感謝 @Wei)
+* Fixed Update Service. (Thanks to @Wei)
+* 新增加拿大版 2018 Toyota Sienna LTD 指紋(v2)。(感謝 明峰 提供)
+* Added Canada 2018 Toyota Sienna LTD fingerprint (v2). (Thanks to 明峰)
+
+2020-05-15 (0.7.5)
+========================
+* 新增「通過移動網路上傳」開關
+* Added Upload Over Mobile Network toggle.
+* 新增「通過熱點上傳」開關
+* Added Upload Over Hotspot toggle.
+* 新增加拿大版 2018 Toyota Sienna LTD 指紋(v1)。(感謝 明峰 提供)
+* Added Canada 2018 Toyota Sienna LTD fingerprint (v1). (Thanks to 明峰)
+* 新增大陸版 Volkswagen Golf GTI 指紋 (v1)。(感謝 easyeiji 提供)
+* Added China Volkswagen Golf GTI fingerprint (v1). (Thanks to easyeiji)
+
+2020-05-10
+========================
+* 基於最新 openpilot 0.7.5 devel-staging.
+* Based on latest openpilot 0.7.5 devel-staging.
+* 更新 dp 圖示 (特別感謝 @wabes 的設計與提供)。
+* Updated dp logo, special thanks to @wabes for the design.
+* 簡/繁中文版和 i18n 整合成為單一版本。  
+* Merged zhs/zht/i18n versions into one.
+* 新增大陸版 CAMRY HYBRID 指紋v2。(感謝 @杜子腾)
+* Added China Camry Hybrid FPv2. (Thanks to @杜子腾) 
+* 新增台灣版 Altis HYBRID 指紋v1。(感謝 @Fish)
+* Added Taiwan Altis Hybrid FPv1. (Thanks to @Fish)
+* 新增行駛時關閉畫面功能。
+* Added Screen off while driving feature.
+* 新增倒車時關閉畫面功能。
+* Added Screen off while reversing feature.
+* 新增駕駛介面加入「加速模式」切換鈕。 
+* Added acceleration profile toggle onto driving UI.
+* 新增自定車型功能，取代指紋暫存功能。
+* Replaced fingerprint cache with custom car model selector.
+* 新增可調亮度。
+* Added Brightness changer.
+* 新增部分德語支持。(特別感謝 @arne182 提供)
+* Added partial de_DE language support (Thanks to @arne182)
+* 新增停車碰撞偵測記錄功能。
+* Added off road impact detection to dashcam.
@@ -2,7 +2,7 @@

 Our software is open source so you can solve your own problems without needing help from others. And if you solve a problem and are so kind, you can upstream it for the rest of the world to use.

-Most open source development activity is coordinated through our [Discord](https://discord.comma.ai). A lot of documentation is available on our [medium](https://medium.com/@comma_ai/)
+Most open source development activity is coordinated through our [Discord](https://discord.comma.ai). A lot of documentation is available on our [medium](https://medium.com/@comma_ai/).

 ## Getting Started

@@ -14,15 +14,15 @@ Most open source development activity is coordinated through our [Discord](https

 ### Local Testing

-You can test your changes on your machine by running `run_docker_tests.sh`. This will run some automated tests in docker against your code. 
+You can test your changes on your machine by running `run_docker_tests.sh`. This will run some automated tests in docker against your code.

 ### Automated Testing

-All PRs are automatically checked by travis. Check out `.travis.yml` for what travis runs. Any new tests sould be added to travis.
+All PRs and commits are automatically checked by Github Actions. Check out `.github/workflows/` for what Github Actions runs. Any new tests sould be added to Github Actions.

 ### Code Style and Linting

-Code is automatically check for style by travis as part of the automated tests. You can also run these yourself by running `check_code_quality.sh`. 
+Code is automatically checked for style by Github Actions as part of the automated tests. You can also run these tests yourself by running `pylint_openpilot.sh` and `flake8_openpilot.sh`.

 ## Car Ports (openpilot)

@@ -32,9 +32,20 @@ If you port openpilot to a substantially new car brand, see this more generic [B

 ## Pull Requests

-Pull requests should be against the master branch. Before running master on in-car hardware, you'll need to run
+Pull requests should be against the master branch. Before running master on in-car hardware, you'll need to clone the submodules too. That can be done by recursively cloning the repository:
+```
+git clone https://github.com/commaai/openpilot.git --recursive
+```
+Or alternatively, when on the master branch:
 ```
 git submodule init
 git submodule update
 ```
-in order to pull down the submodules, such as `panda` and `opendbc`.
+The reasons for having submodules on a dedicated repository and our new development philosophy can be found in our [post about externalization](https://medium.com/@comma_ai/a-2020-theme-externalization-13b33326d8b3).
+Modules that are in seperate repositories include:
+* apks
+* cereal
+* laika
+* opendbc
+* panda
+* rednose
@@ -57,102 +57,124 @@ openpilot should preserve all other vehicle's stock features, including, but are
 Supported Hardware
 ------

-At the moment, openpilot supports the [EON DevKit](https://comma.ai/shop/products/eon-dashcam-devkit) and the [comma two](https://comma.ai/shop/products/comma-two-devkit). A [car harness](https://comma.ai/shop/products/car-harness) is recommended to connect the EON or comma two to the car. In the future, we'd like to support other platforms as well, like gaming PCs.
+At the moment, openpilot supports the [EON DevKit](https://comma.ai/shop/products/eon-dashcam-devkit) and the [comma two](https://comma.ai/shop/products/comma-two-devkit). A [car harness](https://comma.ai/shop/products/car-harness) is recommended to connect the EON or comma two to the car. For experimental purposes, openpilot can also run on an Ubuntu computer with external [webcams](https://github.com/commaai/openpilot/tree/master/tools/webcam).

 Supported Cars
 ------

-| Make      | Model (US Market Reference)   | Supported Package | ACC              | No ACC accel below | No ALC below |
-| ----------| ------------------------------| ------------------| -----------------| -------------------| -------------|
-| Acura     | ILX 2016-18                   | AcuraWatch Plus   | openpilot        | 25mph<sup>5</sup>  | 25mph        |
-| Acura     | RDX 2016-18                   | AcuraWatch Plus   | openpilot        | 25mph<sup>5</sup>  | 12mph        |
-| Chrysler  | Pacifica 2017-18              | Adaptive Cruise   | Stock            | 0mph               | 9mph         |
-| Chrysler  | Pacifica Hybrid 2017-18       | Adaptive Cruise   | Stock            | 0mph               | 9mph         |
-| Chrysler  | Pacifica Hybrid 2019-20       | Adaptive Cruise   | Stock            | 0mph               | 39mph        |
-| Honda     | Accord 2018-19                | All               | Stock            | 0mph               | 3mph         |
-| Honda     | Accord Hybrid 2018-19         | All               | Stock            | 0mph               | 3mph         |
-| Honda     | Civic Hatchback 2017-19       | Honda Sensing     | Stock            | 0mph               | 12mph        |
-| Honda     | Civic Sedan/Coupe 2016-18     | Honda Sensing     | openpilot        | 0mph               | 12mph        |
-| Honda     | Civic Sedan/Coupe 2019        | Honda Sensing     | Stock            | 0mph               | 2mph         |
-| Honda     | CR-V 2015-16                  | Touring           | openpilot        | 25mph<sup>5</sup>  | 12mph        |
-| Honda     | CR-V 2017-19                  | Honda Sensing     | Stock            | 0mph               | 12mph        |
-| Honda     | CR-V Hybrid 2017-2019         | Honda Sensing     | Stock            | 0mph               | 12mph        |
-| Honda     | Fit 2018-19                   | Honda Sensing     | openpilot        | 25mph<sup>5</sup>  | 12mph        |
-| Honda     | Odyssey 2018-20               | Honda Sensing     | openpilot        | 25mph<sup>5</sup>  | 0mph         |
-| Honda     | Passport 2019                 | All               | openpilot        | 25mph<sup>5</sup>  | 12mph        |
-| Honda     | Pilot 2016-18                 | Honda Sensing     | openpilot        | 25mph<sup>5</sup>  | 12mph        |
-| Honda     | Pilot 2019                    | All               | openpilot        | 25mph<sup>5</sup>  | 12mph        |
-| Honda     | Ridgeline 2017-19             | Honda Sensing     | openpilot        | 25mph<sup>5</sup>  | 12mph        |
-| Hyundai   | Elantra 2017-19<sup>1</sup>   | SCC + LKAS        | Stock            | 19mph              | 34mph        |
-| Hyundai   | Genesis 2018<sup>1</sup>      | All               | Stock            | 19mph              | 34mph        |
-| Hyundai   | Santa Fe 2019<sup>1</sup>     | All               | Stock            | 0mph               | 0mph         |
-| Jeep      | Grand Cherokee 2016-18        | Adaptive Cruise   | Stock            | 0mph               | 9mph         |
-| Jeep      | Grand Cherokee 2019           | Adaptive Cruise   | Stock            | 0mph               | 39mph        |
-| Kia       | Optima 2019<sup>1</sup>       | SCC + LKAS        | Stock            | 0mph               | 0mph         |
-| Kia       | Sorento 2018<sup>1</sup>      | All               | Stock            | 0mph               | 0mph         |
-| Kia       | Stinger 2018<sup>1</sup>      | SCC + LKAS        | Stock            | 0mph               | 0mph         |
-| Lexus     | CT Hybrid 2017-18             | All               | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Lexus     | ES 2019                       | All               | openpilot        | 0mph               | 0mph         |
-| Lexus     | ES Hybrid 2019                | All               | openpilot        | 0mph               | 0mph         |
-| Lexus     | IS 2017-2019                  | All               | Stock            | 22mph              | 0mph         |
-| Lexus     | IS Hybrid 2017                | All               | Stock            | 0mph               | 0mph         |
-| Lexus     | RX 2016-17                    | All               | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Lexus     | RX 2020                       | All               | openpilot        | 0mph               | 0mph         |
-| Lexus     | RX Hybrid 2016-19             | All               | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Subaru    | Crosstrek 2018-19             | EyeSight          | Stock            | 0mph               | 0mph         |
-| Subaru    | Impreza 2019-20               | EyeSight          | Stock            | 0mph               | 0mph         |
-| Toyota    | Avalon 2016                   | TSS-P             | Stock<sup>4</sup>| 20mph<sup>5</sup>  | 0mph         |
-| Toyota    | Avalon 2017-18                | All               | Stock<sup>4</sup>| 20mph<sup>5</sup>  | 0mph         |
-| Toyota    | Camry 2018-19                 | All               | Stock            | 0mph<sup>2</sup>   | 0mph         |
-| Toyota    | Camry Hybrid 2018-19          | All               | Stock            | 0mph<sup>2</sup>   | 0mph         |
-| Toyota    | C-HR 2017-19                  | All               | Stock            | 0mph               | 0mph         |
-| Toyota    | C-HR Hybrid 2017-19           | All               | Stock            | 0mph               | 0mph         |
-| Toyota    | Corolla 2017-19               | All               | Stock<sup>4</sup>| 20mph<sup>5</sup>  | 0mph         |
-| Toyota    | Corolla 2020                  | All               | openpilot        | 0mph               | 0mph         |
-| Toyota    | Corolla Hatchback 2019-20     | All               | openpilot        | 0mph               | 0mph         |
-| Toyota    | Corolla Hybrid 2020           | All               | openpilot        | 0mph               | 0mph         |
-| Toyota    | Highlander 2017-19            | All               | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Toyota    | Highlander Hybrid 2017-19     | All               | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Toyota    | Prius 2016                    | TSS-P             | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Toyota    | Prius 2017-19                 | All               | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Toyota    | Prius Prime 2017-20           | All               | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Toyota    | Rav4 2016                     | TSS-P             | Stock<sup>4</sup>| 20mph<sup>5</sup>  | 0mph         |
-| Toyota    | Rav4 2017-18                  | All               | Stock<sup>4</sup>| 20mph<sup>5</sup>  | 0mph         |
-| Toyota    | Rav4 2019                     | All               | openpilot        | 0mph               | 0mph         |
-| Toyota    | Rav4 Hybrid 2016              | TSS-P             | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Toyota    | Rav4 Hybrid 2017-18           | All               | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Toyota    | Rav4 Hybrid 2019-20           | All               | openpilot        | 0mph               | 0mph         |
-| Toyota    | Sienna 2018                   | All               | Stock<sup>4</sup>| 0mph               | 0mph         |
-| Volkswagen| Golf 2016-19<sup>3</sup>      | Driver Assistance | Stock            | 0mph               | 0mph         |
+| Make      | Model (US Market Reference)   | Supported Package | ACC              | No ACC accel below | No ALC below      |
+| ----------| ------------------------------| ------------------| -----------------| -------------------| ------------------|
+| Acura     | ILX 2016-18                   | AcuraWatch Plus   | openpilot        | 25mph<sup>1</sup>  | 25mph             |
+| Acura     | RDX 2016-18                   | AcuraWatch Plus   | openpilot        | 25mph<sup>1</sup>  | 12mph             |
+| Honda     | Accord 2018-19                | All               | Stock            | 0mph               | 3mph              |
+| Honda     | Accord Hybrid 2018-19         | All               | Stock            | 0mph               | 3mph              |
+| Honda     | Civic Hatchback 2017-19       | Honda Sensing     | Stock            | 0mph               | 12mph             |
+| Honda     | Civic Sedan/Coupe 2016-18     | Honda Sensing     | openpilot        | 0mph               | 12mph             |
+| Honda     | Civic Sedan/Coupe 2019-20     | Honda Sensing     | Stock            | 0mph               | 2mph<sup>2</sup>  |
+| Honda     | CR-V 2015-16                  | Touring           | openpilot        | 25mph<sup>1</sup>  | 12mph             |
+| Honda     | CR-V 2017-20                  | Honda Sensing     | Stock            | 0mph               | 12mph             |
+| Honda     | CR-V Hybrid 2017-2019         | Honda Sensing     | Stock            | 0mph               | 12mph             |
+| Honda     | Fit 2018-19                   | Honda Sensing     | openpilot        | 25mph<sup>1</sup>  | 12mph             |
+| Honda     | HR-V 2019                     | Honda Sensing     | openpilot        | 25mph<sup>1</sup>  | 12mph             |
+| Honda     | Insight 2019                  | Honda Sensing     | Stock            | 0mph               | 3mph              |
+| Honda     | Odyssey 2018-20               | Honda Sensing     | openpilot        | 25mph<sup>1</sup>  | 0mph              |
+| Honda     | Passport 2019                 | All               | openpilot        | 25mph<sup>1</sup>  | 12mph             |
+| Honda     | Pilot 2016-18                 | Honda Sensing     | openpilot        | 25mph<sup>1</sup>  | 12mph             |
+| Honda     | Pilot 2019                    | All               | openpilot        | 25mph<sup>1</sup>  | 12mph             |
+| Honda     | Ridgeline 2017-20             | Honda Sensing     | openpilot        | 25mph<sup>1</sup>  | 12mph             |
+| Lexus     | CT Hybrid 2017-18             | All               | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Lexus     | ES 2019                       | All               | openpilot        | 0mph               | 0mph              |
+| Lexus     | ES Hybrid 2019                | All               | openpilot        | 0mph               | 0mph              |
+| Lexus     | IS 2017-2019                  | All               | Stock            | 22mph              | 0mph              |
+| Lexus     | IS Hybrid 2017                | All               | Stock            | 0mph               | 0mph              |
+| Lexus     | NX Hybrid 2018                | All               | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Lexus     | RX 2016-17                    | All               | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Lexus     | RX 2020                       | All               | openpilot        | 0mph               | 0mph              |
+| Lexus     | RX Hybrid 2016-19             | All               | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Lexus     | RX Hybrid 2020                | All               | openpilot        | 0mph               | 0mph              |
+| Toyota    | Avalon 2016                   | TSS-P             | Stock<sup>3</sup>| 20mph<sup>1</sup>  | 0mph              |
+| Toyota    | Avalon 2017-18                | All               | Stock<sup>3</sup>| 20mph<sup>1</sup>  | 0mph              |
+| Toyota    | Camry 2018-20                 | All               | Stock            | 0mph<sup>4</sup>   | 0mph              |
+| Toyota    | Camry Hybrid 2018-19          | All               | Stock            | 0mph<sup>4</sup>   | 0mph              |
+| Toyota    | C-HR 2017-19                  | All               | Stock            | 0mph               | 0mph              |
+| Toyota    | C-HR Hybrid 2017-19           | All               | Stock            | 0mph               | 0mph              |
+| Toyota    | Corolla 2017-19               | All               | Stock<sup>3</sup>| 20mph<sup>1</sup>  | 0mph              |
+| Toyota    | Corolla 2020                  | All               | openpilot        | 0mph               | 0mph              |
+| Toyota    | Corolla Hatchback 2019-20     | All               | openpilot        | 0mph               | 0mph              |
+| Toyota    | Corolla Hybrid 2020           | All               | openpilot        | 0mph               | 0mph              |
+| Toyota    | Highlander 2017-19            | All               | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Toyota    | Highlander Hybrid 2017-19     | All               | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Toyota    | Highlander 2020               | All               | openpilot        | 0mph               | 0mph              |
+| Toyota    | Highlander Hybrid 2020        | All               | openpilot        | 0mph               | 0mph              |
+| Toyota    | Prius 2016                    | TSS-P             | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Toyota    | Prius 2017-19                 | All               | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Toyota    | Prius Prime 2017-20           | All               | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Toyota    | Rav4 2016                     | TSS-P             | Stock<sup>3</sup>| 20mph<sup>1</sup>  | 0mph              |
+| Toyota    | Rav4 2017-18                  | All               | Stock<sup>3</sup>| 20mph<sup>1</sup>  | 0mph              |
+| Toyota    | Rav4 2019-20                  | All               | openpilot        | 0mph               | 0mph              |
+| Toyota    | Rav4 Hybrid 2016              | TSS-P             | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Toyota    | Rav4 Hybrid 2017-18           | All               | Stock<sup>3</sup>| 0mph               | 0mph              |
+| Toyota    | Rav4 Hybrid 2019-20           | All               | openpilot        | 0mph               | 0mph              |
+| Toyota    | Sienna 2018-20                | All               | Stock<sup>3</sup>| 0mph               | 0mph              |

-<sup>1</sup>Requires a [panda](https://comma.ai/shop/products/panda-obd-ii-dongle) and open sourced [Hyundai giraffe](https://github.com/commaai/neo/tree/master/giraffe/hyundai), designed for the 2019 Sante Fe; pinout may differ for other Hyundai and Kia models. <br />
-<sup>2</sup>28mph for Camry 4CYL L, 4CYL LE and 4CYL SE which don't have Full-Speed Range Dynamic Radar Cruise Control. <br />
-<sup>3</sup>Requires a [custom connector](https://community.comma.ai/wiki/index.php/Volkswagen#Integration_at_R242_Camera) for the [car harness](https://comma.ai/shop/products/car-harness) <br />
+<sup>1</sup>[Comma Pedal](https://community.comma.ai/wiki/index.php/Comma_Pedal) is used to provide stop-and-go capability to some of the openpilot-supported cars that don't currently support stop-and-go. Here is how to [build a Comma Pedal](https://medium.com/@jfrux/comma-pedal-building-with-macrofab-6328bea791e8). ***NOTE: The Comma Pedal is not officially supported by [comma](https://comma.ai).*** <br />
+<sup>2</sup>2019 Honda Civic 1.6L Diesel Sedan does not have ALC below 12mph. <br />
+<sup>3</sup>When disconnecting the Driver Support Unit (DSU), openpilot ACC will replace stock ACC. For DSU locations, see [Toyota Wiki page](https://community.comma.ai/wiki/index.php/Toyota). ***NOTE: disconnecting the DSU disables Automatic Emergency Braking (AEB).*** <br />
+<sup>4</sup>28mph for Camry 4CYL L, 4CYL LE and 4CYL SE which don't have Full-Speed Range Dynamic Radar Cruise Control. <br />

 Community Maintained Cars and Features
 ------

 | Make      | Model (US Market Reference)   | Supported Package | ACC              | No ACC accel below | No ALC below |
 | ----------| ------------------------------| ------------------| -----------------| -------------------| -------------|
-| Buick     | Regal 2018<sup>6</sup>        | Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
-| Cadillac  | ATS 2018<sup>6</sup>          | Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
-| Chevrolet | Malibu 2017<sup>6</sup>       | Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
-| Chevrolet | Volt 2017-18<sup>6</sup>      | Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
-| GMC       | Acadia Denali 2018<sup>6</sup>| Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
-| Holden    | Astra 2017<sup>6</sup>        | Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
+| Buick     | Regal 2018<sup>1</sup>        | Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
+| Cadillac  | ATS 2018<sup>1</sup>          | Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
+| Chevrolet | Malibu 2017<sup>1</sup>       | Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
+| Chevrolet | Volt 2017-18<sup>1</sup>      | Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
+| Chrysler  | Pacifica 2017-18              | Adaptive Cruise   | Stock            | 0mph               | 9mph         |
+| Chrysler  | Pacifica 2020                 | Adaptive Cruise   | Stock            | 0mph               | 39mph        |
+| Chrysler  | Pacifica Hybrid 2017-18       | Adaptive Cruise   | Stock            | 0mph               | 9mph         |
+| Chrysler  | Pacifica Hybrid 2019-20       | Adaptive Cruise   | Stock            | 0mph               | 39mph        |
+| Genesis   | G80 2018<sup>2</sup>          | All               | Stock            | 0mph               | 0mph         |
+| Genesis   | G90 2018                      | All               | Stock            | 0mph               | 0mph         |
+| GMC       | Acadia Denali 2018<sup>2</sup>| Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
+| Holden    | Astra 2017<sup>1</sup>        | Adaptive Cruise   | openpilot        | 0mph               | 7mph         |
+| Hyundai   | Elantra 2017-19<sup>2</sup>   | SCC + LKAS        | Stock            | 19mph              | 34mph        |
+| Hyundai   | Genesis 2015-16<sup>2</sup>   | SCC + LKAS        | Stock            | 19mph              | 37mph        |
+| Hyundai   | Kona 2017-19<sup>2</sup>      | SCC + LKAS        | Stock            | 22mph              | 0mph         |
+| Hyundai   | Kona 2019 EV<sup>2</sup>      | SCC + LKAS        | Stock            | 0mph               | 0mph         |
+| Hyundai   | Palisade 2020<sup>2</sup>     | All               | Stock            | 0mph               | 0mph         |
+| Hyundai   | Santa Fe 2019                 | All               | Stock            | 0mph               | 0mph         |
+| Hyundai   | Sonata 2019-20                | All               | Stock            | 0mph               | 0mph         |
+| Jeep      | Grand Cherokee 2016-18        | Adaptive Cruise   | Stock            | 0mph               | 9mph         |
+| Jeep      | Grand Cherokee 2019           | Adaptive Cruise   | Stock            | 0mph               | 39mph        |
+| Kia       | Forte 2018-19<sup>2</sup>     | SCC + LKAS        | Stock            | 0mph               | 0mph         |
+| Kia       | Optima 2017<sup>2</sup>       | SCC + LKAS/LDWS   | Stock            | 0mph               | 32mph        |
+| Kia       | Optima 2019<sup>2</sup>       | SCC + LKAS        | Stock            | 0mph               | 0mph         |
+| Kia       | Sorento 2018<sup>2</sup>      | SCC + LKAS        | Stock            | 0mph               | 0mph         |
+| Kia       | Stinger 2018<sup>2</sup>      | SCC + LKAS        | Stock            | 0mph               | 0mph         |
+| Nissan    | Leaf 2018-19<sup>2</sup>      | Propilot          | Stock            | 0mph               | 0mph         |
+| Nissan    | Rogue 2019<sup>2</sup>        | Propilot          | Stock            | 0mph               | 0mph         |
+| Nissan    | X-Trail 2017<sup>2</sup>      | Propilot          | Stock            | 0mph               | 0mph         |
+| Subaru    | Crosstrek 2018-19             | EyeSight          | Stock            | 0mph               | 0mph         |
+| Subaru    | Impreza 2018-20               | EyeSight          | Stock            | 0mph               | 0mph         |
+| Volkswagen| Golf 2015-19                  | Driver Assistance | Stock            | 0mph               | 0mph         |

-<sup>4</sup>When disconnecting the Driver Support Unit (DSU), openpilot ACC will replace stock ACC. For DSU locations, see [Toyota Wiki page](https://community.comma.ai/wiki/index.php/Toyota). ***NOTE: disconnecting the DSU disables Automatic Emergency Braking (AEB).*** <br />
-<sup>5</sup>[Comma Pedal](https://community.comma.ai/wiki/index.php/Comma_Pedal) is used to provide stop-and-go capability to some of the openpilot-supported cars that don't currently support stop-and-go. Here is how to [build a Comma Pedal](https://medium.com/@jfrux/comma-pedal-building-with-macrofab-6328bea791e8). ***NOTE: The Comma Pedal is not officially supported by [comma](https://comma.ai).*** <br />
-<sup>6</sup>Requires a [panda](https://comma.ai/shop/products/panda-obd-ii-dongle) and [community built giraffe](https://zoneos.com/volt/). ***NOTE: disconnecting the ASCM disables Automatic Emergency Braking (AEB).*** <br />
+<sup>1</sup>Requires a [panda](https://comma.ai/shop/products/panda-obd-ii-dongle) and [community built giraffe](https://zoneos.com/volt/). ***NOTE: disconnecting the ASCM disables Automatic Emergency Braking (AEB).*** <br />
+<sup>2</sup>May require a custom connector for the developer [car harness](https://comma.ai/shop/products/car-harness) <br />
+
+Although it's not upstream, there's a community of people getting openpilot to run on Tesla's [here](https://tinkla.us/)

 Community Maintained Cars and Features are not verified by comma to meet our [safety model](SAFETY.md). Be extra cautious using them. They are only available after enabling the toggle in `Settings->Developer->Enable Community Features`.

+To promote a car from community maintained, it must meet a few requirements. We must own one from the brand, we must sell the harness for it, has full ISO26262 in both panda and openpilot, there must be a path forward for longitudinal control, it must have AEB still enabled, and it must support fingerprinting 2.0
+
 Installation Instructions
 ------

-Install openpilot on a EON by entering ``https://openpilot.comma.ai`` during the installer setup.
+Install openpilot on an EON or comma two by entering ``https://openpilot.comma.ai`` during the installer setup.

-Follow this [video instructions](https://youtu.be/3nlkomHathI) to properly mount the EON on the windshield. Note: openpilot features an automatic pose calibration routine and openpilot performance should not be affected by small pitch and yaw misalignments caused by imprecise EON mounting.
+Follow these [video instructions](https://youtu.be/3nlkomHathI) to properly mount the device on the windshield. Note: openpilot features an automatic pose calibration routine and openpilot performance should not be affected by small pitch and yaw misalignments caused by imprecise device mounting.

 Before placing the device on your windshield, check the state and local laws and ordinances where you drive. Some state laws prohibit or restrict the placement of objects on the windshield of a motor vehicle.

@@ -170,7 +192,7 @@ Many factors can impact the performance of openpilot ALC and openpilot LDW, caus
 * Poor visibility (heavy rain, snow, fog, etc.) or weather conditions that may interfere with sensor operation.
 * The road facing camera is obstructed, covered or damaged by mud, ice, snow, etc.
 * Obstruction caused by applying excessive paint or adhesive products (such as wraps, stickers, rubber coating, etc.) onto the vehicle.
-* The EON is mounted incorrectly.
+* The device is mounted incorrectly.
 * When in sharp curves, like on-off ramps, intersections etc...; openpilot is designed to be limited in the amount of steering torque it can produce.
 * In the presence of restricted lanes or construction zones.
 * When driving on highly banked roads or in presence of strong cross-wind.
@@ -190,7 +212,7 @@ Many factors can impact the performance of openpilot ACC and openpilot FCW, caus
 * Poor visibility (heavy rain, snow, fog, etc.) or weather conditions that may interfere with sensor operation.
 * The road facing camera or radar are obstructed, covered, or damaged by mud, ice, snow, etc.
 * Obstruction caused by applying excessive paint or adhesive products (such as wraps, stickers, rubber coating, etc.) onto the vehicle.
-* The EON is mounted incorrectly.
+* The device is mounted incorrectly.
 * Approaching a toll booth, a bridge or a large metal plate.
 * When driving on roads with pedestrians, cyclists, etc...
 * In presence of traffic signs or stop lights, which are not detected by openpilot at this time.
@@ -208,13 +230,13 @@ The list above does not represent an exhaustive list of situations that may inte
 Limitations of openpilot DM
 ------

-openpilot DM should not be considered an exact measurements of the status of alertness of the driver.
+openpilot DM should not be considered an exact measurement of the alertness of the driver.

 Many factors can impact the performance of openpilot DM, causing it to be unable to function as intended. These include, but are not limited to:

 * Low light conditions, such as driving at night or in dark tunnels.
 * Bright light (due to oncoming headlights, direct sunlight, etc.).
-* The driver face is partially or completely outside field of view of the driver facing camera.
+* The driver's face is partially or completely outside field of view of the driver facing camera.
 * Right hand driving vehicles.
 * The driver facing camera is obstructed, covered, or damaged.

@@ -236,7 +258,7 @@ Safety and Testing
 ----

 * openpilot observes ISO26262 guidelines, see [SAFETY.md](SAFETY.md) for more detail.
-* openpilot has software in the loop [tests](run_docker_tests.sh) that run on every commit.
+* openpilot has software in the loop [tests](.github/workflows/test.yaml) that run on every commit.
 * The safety model code lives in panda and is written in C, see [code rigor](https://github.com/commaai/panda#code-rigor) for more details.
 * panda has software in the loop [safety tests](https://github.com/commaai/panda/tree/master/tests/safety).
 * Internally, we have a hardware in the loop Jenkins test suite that builds and unit tests the various processes.
@@ -263,15 +285,15 @@ Directory Structure
 ------
    .
    ├── apk                 # The apk files used for the UI
-    ├── cereal              # The messaging spec and libs used for all logs on EON
+    ├── cereal              # The messaging spec and libs used for all logs
    ├── common              # Library like functionality we've developed here
    ├── installer/updater   # Manages auto-updates of openpilot
    ├── opendbc             # Files showing how to interpret data from cars
    ├── panda               # Code used to communicate on CAN
-    ├── phonelibs           # Libraries used on EON
-    ├── pyextra             # Libraries used on EON
+    ├── phonelibs           # Libraries used on NEOS devices
+    ├── pyextra             # Libraries used on NEOS devices
    └── selfdrive           # Code needed to drive the car
-        ├── assets          # Fonts and images for UI
+        ├── assets          # Fonts, images, and sounds for UI
        ├── athena          # Allows communication with the app
        ├── boardd          # Daemon to talk to the board
        ├── camerad         # Driver to capture images from the camera sensors
@@ -285,7 +307,7 @@ Directory Structure
        ├── modeld          # Driving and monitoring model runners
        ├── proclogd        # Logs information from proc
        ├── sensord         # IMU / GPS interface code
-        ├── tests           # Unit tests, system tests and a car simulator
+        ├── test            # Unit tests, system tests and a car simulator
        └── ui              # The UI

 To understand how the services interact, see `cereal/service_list.yaml`.
@@ -304,3 +326,9 @@ NO WARRANTY EXPRESSED OR IMPLIED.**
 ---

 <img src="https://d1qb2nb5cznatu.cloudfront.net/startups/i/1061157-bc7e9bf3b246ece7322e6ffe653f6af8-medium_jpg.jpg?buster=1458363130" width="75"></img> <img src="https://cdn-images-1.medium.com/max/1600/1*C87EjxGeMPrkTuVRVWVg4w.png" width="225"></img>
+
+[![openpilot tests](https://github.com/commaai/openpilot/workflows/openpilot%20tests/badge.svg)](https://github.com/commaai/openpilot/actions)
+[![Total alerts](https://img.shields.io/lgtm/alerts/g/commaai/openpilot.svg?logo=lgtm&logoWidth=18)](https://lgtm.com/projects/g/commaai/openpilot/alerts/)
+[![Language grade: Python](https://img.shields.io/lgtm/grade/python/g/commaai/openpilot.svg?logo=lgtm&logoWidth=18)](https://lgtm.com/projects/g/commaai/openpilot/context:python)
+[![Language grade: C/C++](https://img.shields.io/lgtm/grade/cpp/g/commaai/openpilot.svg?logo=lgtm&logoWidth=18)](https://lgtm.com/projects/g/commaai/openpilot/context:cpp)
+[![codecov](https://codecov.io/gh/commaai/openpilot/branch/master/graph/badge.svg)](https://codecov.io/gh/commaai/openpilot)
@@ -1,3 +1,42 @@
+Version 0.7.6.1 (2020-06-16)
+========================
+* Hotfix: update kernel on some comma twos (orders #8570-#8680)
+
+Version 0.7.6 (2020-06-05)
+========================
+* White panda is deprecated, upgrade to comma two or black panda
+* 2017 Nissan X-Trail, 2018-19 Leaf and 2019 Rogue support thanks to avolmensky!
+* 2017 Mazda CX-5 support in dashcam mode thanks to Jafaral!
+* Huge CPU savings in modeld by using thneed!
+* Lots of code cleanup and refactors
+
+Version 0.7.5 (2020-05-13)
+========================
+* Right-Hand Drive support for both driving and driver monitoring!
+* New driving model: improved at sharp turns and lead speed estimation
+* New driver monitoring model: overall improvement on comma two
+* Driver camera preview in settings to improve mounting position
+* Added support for many Hyundai, Kia, Genesis models thanks to xx979xx!
+* Improved lateral tuning for 2020 Toyota Rav 4 (hybrid)
+
+Version 0.7.4 (2020-03-20)
+========================
+ * New driving model: improved lane changes and lead car detection
+ * Improved driver monitoring model: improve eye detection
+ * Improved calibration stability
+ * Improved lateral control on some 2019 and 2020 Toyota Prius
+ * Improved lateral control on VW Golf: 20% more steering torque
+ * Fixed bug where some 2017 and 2018 Toyota C-HR would use the wrong steering angle sensor
+ * Support for Honda Insight thanks to theantihero!
+ * Code cleanup in car abstraction layers and ui
+
+Version 0.7.3 (2020-02-21)
+========================
+ * Support for 2020 Highlander thanks to che220!
+ * Support for 2018 Lexus NX 300h thanks to kengggg!
+ * Speed up ECU firmware query
+ * Fix bug where manager would sometimes hang after shutting down the car
+
 Version 0.7.2 (2020-02-07)
 ========================
 * ECU firmware version based fingerprinting for Honda & Toyota
@@ -14,47 +14,58 @@ AddOption('--asan',
 arch = subprocess.check_output(["uname", "-m"], encoding='utf8').rstrip()
 if platform.system() == "Darwin":
  arch = "Darwin"
+if arch == "aarch64" and not os.path.isdir("/system"):
+  arch = "larch64"

-if arch == "aarch64":
+webcam = bool(ARGUMENTS.get("use_webcam", 0))
+
+if arch == "aarch64" or arch == "larch64":
  lenv = {
    "LD_LIBRARY_PATH": '/data/data/com.termux/files/usr/lib',
    "PATH": os.environ['PATH'],
-    "ANDROID_DATA": os.environ['ANDROID_DATA'],
-    "ANDROID_ROOT": os.environ['ANDROID_ROOT'],
  }

+  if arch == "aarch64":
+    # android
+    lenv["ANDROID_DATA"] = os.environ['ANDROID_DATA']
+    lenv["ANDROID_ROOT"] = os.environ['ANDROID_ROOT']
+
  cpppath = [
    "#phonelibs/opencl/include",
  ]
+
  libpath = [
-    "#phonelibs/snpe/aarch64-android-clang3.8",
    "/usr/lib",
    "/data/data/com.termux/files/usr/lib",
    "/system/vendor/lib64",
    "/system/comma/usr/lib",
    "#phonelibs/nanovg",
-    "#phonelibs/libyuv/lib",
  ]

-  cflags = ["-DQCOM", "-mcpu=cortex-a57"]
-  cxxflags = ["-DQCOM", "-mcpu=cortex-a57"]
+  if arch == "larch64":
+    libpath += ["#phonelibs/snpe/larch64"]
+    libpath += ["#phonelibs/libyuv/larch64/lib"]
+    libpath += ["/usr/lib/aarch64-linux-gnu"]
+    cflags = ["-DQCOM2", "-mcpu=cortex-a57"]
+    cxxflags = ["-DQCOM2", "-mcpu=cortex-a57"]
+    rpath = ["/usr/local/lib"]
+  else:
+    libpath += ["#phonelibs/snpe/aarch64"]
+    libpath += ["#phonelibs/libyuv/lib"]
+    cflags = ["-DQCOM", "-mcpu=cortex-a57"]
+    cxxflags = ["-DQCOM", "-mcpu=cortex-a57"]
+    rpath = ["/system/vendor/lib64"]

-  rpath = ["/system/vendor/lib64"]
 else:
  lenv = {
    "PATH": "#external/bin:" + os.environ['PATH'],
  }
  cpppath = [
-    "#phonelibs/capnp-cpp/include",
-    "#phonelibs/capnp-c/include",
-    "#phonelibs/zmq/x64/include",
    "#external/tensorflow/include",
  ]

  if arch == "Darwin":
    libpath = [
-      "#phonelibs/capnp-cpp/mac/lib",
-      "#phonelibs/capnp-c/mac/lib",
      "#phonelibs/libyuv/mac/lib",
      "#cereal",
      "#selfdrive/common",
@@ -63,12 +74,8 @@ else:
    ]
  else:
    libpath = [
-      "#phonelibs/capnp-cpp/x64/lib",
-      "#phonelibs/capnp-c/x64/lib",
      "#phonelibs/snpe/x86_64-linux-clang",
-      "#phonelibs/zmq/x64/lib",
      "#phonelibs/libyuv/x64/lib",
-      "#external/zmq/lib",
      "#external/tensorflow/lib",
      "#cereal",
      "#selfdrive/common",
@@ -76,8 +83,7 @@ else:
      "/usr/local/lib",
    ]

-  rpath = ["phonelibs/capnp-cpp/x64/lib",
-           "phonelibs/zmq/x64/lib",
+  rpath = [
           "external/tensorflow/lib",
           "cereal",
           "selfdrive/common"]
@@ -100,11 +106,9 @@ env = Environment(
    "-g",
    "-fPIC",
    "-O2",
-    "-Werror=implicit-function-declaration",
-    "-Werror=incompatible-pointer-types",
-    "-Werror=int-conversion",
-    "-Werror=return-type",
-    "-Werror=format-extra-args",
+    "-Werror",
+    "-Wno-deprecated-register",
+    "-Wno-inconsistent-missing-override",
  ] + cflags + ccflags_asan,

  CPPPATH=cpppath + [
@@ -113,11 +117,9 @@ env = Environment(
    "#phonelibs/bzip2",
    "#phonelibs/libyuv/include",
    "#phonelibs/openmax/include",
-    "#phonelibs/json/src",
    "#phonelibs/json11",
-    "#phonelibs/eigen",
    "#phonelibs/curl/include",
-    "#phonelibs/opencv/include",
+    #"#phonelibs/opencv/include", # use opencv4 instead
    "#phonelibs/libgralloc/include",
    "#phonelibs/android_frameworks_native/include",
    "#phonelibs/android_hardware_libhardware/include",
@@ -175,10 +177,9 @@ def abspath(x):
    # rpath works elsewhere
    return x[0].path.rsplit("/", 1)[1][:-3]

-#zmq = 'zmq'
 # still needed for apks
-zmq = FindFile("libzmq.a", libpath)
-Export('env', 'arch', 'zmq', 'SHARED')
+zmq = 'zmq'
+Export('env', 'arch', 'zmq', 'SHARED', 'webcam')

 # cereal and messaging are shared with the system
 SConscript(['cereal/SConscript'])
@@ -196,7 +197,7 @@ Import('_common', '_visionipc', '_gpucommon', '_gpu_libs')
 if SHARED:
  common, visionipc, gpucommon = abspath(common), abspath(visionipc), abspath(gpucommon)
 else:
-  common = [_common, 'json']
+  common = [_common, 'json11']
  visionipc = _visionipc
  gpucommon = [_gpucommon] + _gpu_libs

@@ -215,6 +216,7 @@ if arch != "Darwin":
 SConscript(['selfdrive/controls/lib/cluster/SConscript'])
 SConscript(['selfdrive/controls/lib/lateral_mpc/SConscript'])
 SConscript(['selfdrive/controls/lib/longitudinal_mpc/SConscript'])
+SConscript(['selfdrive/controls/lib/longitudinal_mpc_model/SConscript'])

 SConscript(['selfdrive/boardd/SConscript'])
 SConscript(['selfdrive/proclogd/SConscript'])
@@ -222,11 +224,12 @@ SConscript(['selfdrive/proclogd/SConscript'])
 SConscript(['selfdrive/ui/SConscript'])
 SConscript(['selfdrive/loggerd/SConscript'])

+SConscript(['selfdrive/locationd/SConscript'])
+SConscript(['selfdrive/locationd/models/SConscript'])
+
 if arch == "aarch64":
  SConscript(['selfdrive/logcatd/SConscript'])
  SConscript(['selfdrive/sensord/SConscript'])
  SConscript(['selfdrive/clocksd/SConscript'])
-
-SConscript(['selfdrive/locationd/SConscript'])
-
-# TODO: finish cereal, dbcbuilder, MPC
+else:
+  SConscript(['tools/lib/index_log/SConscript'])
@@ -0,0 +1,25 @@
+name: Tests
+
+on: [push, pull_request]
+
+jobs:
+  test:
+
+    runs-on: ubuntu-16.04
+
+    steps:
+    - uses: actions/checkout@v2
+    - name: Build docker image
+      run: docker build -t cereal .
+    - name: Static analysis
+      run: |
+        docker run cereal bash -c "git init && git add -A && pre-commit run --all"
+    - name: Unit Tests
+      run: |
+        docker run cereal bash -c "scons --test --asan -j$(nproc) && messaging/test_runner"
+    - name: Test ZMQ
+      run: |
+        docker run cereal bash -c "ZMQ=1 python -m unittest discover ."
+    - name: Test MSGQ
+      run: |
+        docker run cereal bash -c "MSGQ=1 python -m unittest discover ."
@@ -11,4 +11,4 @@ libmessaging_shared.*
 services.h
 .sconsign.dblite
 libcereal_shared.*
-
+.mypy_cache/
@@ -0,0 +1,27 @@
+repos:
+-   repo: https://github.com/pre-commit/pre-commit-hooks
+    rev: master
+    hooks:
+    -   id: check-ast
+    -   id: check-json
+    -   id: check-xml
+    -   id: check-yaml
+-   repo: https://github.com/pre-commit/mirrors-mypy
+    rev: master
+    hooks:
+    -   id: mypy
+-   repo: https://github.com/PyCQA/flake8
+    rev: master
+    hooks:
+    -   id: flake8
+        args:
+        - --select=F
+-   repo: local
+    hooks:
+    -   id: pylint
+        name: pylint
+        entry: pylint
+        language: system
+        types: [python]
+        args:
+        - --disable=R,C,W
@@ -1,19 +1,18 @@
-from ubuntu:16.04
+FROM ubuntu:16.04

-RUN apt-get update && apt-get install -y libzmq3-dev clang wget git autoconf libtool curl make build-essential libssl-dev zlib1g-dev libbz2-dev libreadline-dev libsqlite3-dev llvm libncurses5-dev libncursesw5-dev xz-utils tk-dev libffi-dev liblzma-dev python-openssl
+RUN apt-get update && apt-get install -y libzmq3-dev capnproto libcapnp-dev clang wget git autoconf libtool curl make build-essential libssl-dev zlib1g-dev libbz2-dev libreadline-dev libsqlite3-dev llvm libncurses5-dev libncursesw5-dev xz-utils tk-dev libffi-dev liblzma-dev python-openssl

 RUN curl -L https://github.com/pyenv/pyenv-installer/raw/master/bin/pyenv-installer | bash
 ENV PATH="/root/.pyenv/bin:/root/.pyenv/shims:${PATH}"
 RUN pyenv install 3.7.3
 RUN pyenv global 3.7.3
 RUN pyenv rehash
-RUN pip3 install pyyaml==5.1.2 Cython==0.29.14 scons==3.1.1 pycapnp==0.6.4
+RUN pip3 install pyyaml==5.1.2 Cython==0.29.14 scons==3.1.1 pycapnp==0.6.4 pre-commit==2.4.0 pylint==2.5.2

 WORKDIR /project/cereal
-COPY install_capnp.sh .
-RUN ./install_capnp.sh

 ENV PYTHONPATH=/project

 COPY . .
+RUN rm -rf .git
 RUN scons -c && scons -j$(nproc)
@@ -35,8 +35,7 @@ while 1:

 # in publisher
 pm = messaging.PubMaster(['sensorEvents'])
-dat = messaging.new_message()
-dat.init('sensorEvents', 1)
+dat = messaging.new_message('sensorEvents', size=1)
 dat.sensorEvents[0] = {"gyro": {"v": [0.1, -0.1, 0.1]}}
 pm.send('sensorEvents', dat)
 ```
@@ -5,10 +5,6 @@ messaging_dir = Dir('messaging')

 # TODO: remove src-prefix and cereal from command string. can we set working directory?
 env.Command(["gen/c/include/c++.capnp.h", "gen/c/include/java.capnp.h"], [], "mkdir -p " + gen_dir.path + "/c/include && touch $TARGETS")
-env.Command(
-  ['gen/c/car.capnp.c', 'gen/c/log.capnp.c', 'gen/c/car.capnp.h', 'gen/c/log.capnp.h'],
-  ['car.capnp', 'log.capnp'],
-  'capnpc $SOURCES --src-prefix=cereal -o c:' + gen_dir.path + '/c/')
 env.Command(
  ['gen/cpp/car.capnp.c++', 'gen/cpp/log.capnp.c++', 'gen/cpp/car.capnp.h', 'gen/cpp/log.capnp.h'],
  ['car.capnp', 'log.capnp'],
@@ -22,14 +18,13 @@ if shutil.which('capnpc-java'):

 # TODO: remove non shared cereal and messaging
 cereal_objects = env.SharedObject([
-    'gen/c/car.capnp.c',
-    'gen/c/log.capnp.c',
    'gen/cpp/car.capnp.c++',
    'gen/cpp/log.capnp.c++',
+    'messaging/socketmaster.cc',
  ])

 env.Library('cereal', cereal_objects)
-env.SharedLibrary('cereal_shared', cereal_objects, LIBS=["capnp_c"])
+env.SharedLibrary('cereal_shared', cereal_objects)

 cereal_dir = Dir('.')
 services_h = env.Command(
@@ -49,8 +44,10 @@ Depends('messaging/impl_zmq.cc', services_h)

 # note, this rebuilds the deps shared, zmq is statically linked to make APK happy
 # TODO: get APK to load system zmq to remove the static link
-shared_lib_shared_lib = [zmq, 'm', 'stdc++'] + ["gnustl_shared"] if arch == "aarch64" else [zmq]
-env.SharedLibrary('messaging_shared', messaging_objects, LIBS=shared_lib_shared_lib)
+if arch == "aarch64":
+  zmq_static = FindFile("libzmq.a", "/usr/lib")
+  shared_lib_shared_lib = [zmq_static, 'm', 'stdc++', "gnustl_shared"]
+  env.SharedLibrary('messaging_shared', messaging_objects, LIBS=shared_lib_shared_lib)

 env.Program('messaging/bridge', ['messaging/bridge.cc'], LIBS=[messaging_lib, 'zmq'])
 Depends('messaging/bridge.cc', services_h)
@@ -1,3 +1,4 @@
+# pylint: skip-file
 import os
 import capnp

@@ -1,14 +0,0 @@
-pr: none
-
-pool:
-  vmImage: 'ubuntu-16.04'
-
-steps:
- script: |
-    set -e
-    docker build -t cereal .
-    docker run cereal bash -c "scons --test --asan -j$(nproc) && messaging/test_runner"
-    docker run cereal bash -c "ZMQ=1 python -m unittest discover ."
-    docker run cereal bash -c "MSGQ=1 python -m unittest discover ."
-
-  displayName: 'Run Tests'
@@ -13,12 +13,12 @@ struct CarEvent @0x9b1657f34caf3ad3 {
  name @0 :EventName;
  enable @1 :Bool;
  noEntry @2 :Bool;
-  warning @3 :Bool;
+  warning @3 :Bool;   # alerts presented only when  enabled or soft disabling
  userDisable @4 :Bool;
  softDisable @5 :Bool;
  immediateDisable @6 :Bool;
  preEnable @7 :Bool;
-  permanent @8 :Bool;
+  permanent @8 :Bool; # alerts presented regardless of openpilot state

  enum EventName @0xbaa8c5d505f727de {
    # TODO: copy from error list
@@ -38,7 +38,7 @@ struct CarEvent @0x9b1657f34caf3ad3 {
    pedalPressed @13;
    cruiseDisabled @14;
    radarCanError @15;
-    dataNeeded @16;
+    dataNeededDEPRECATED @16;
    speedTooLow @17;
    outOfSpace @18;
    overheat @19;
@@ -55,23 +55,23 @@ struct CarEvent @0x9b1657f34caf3ad3 {
    manualRestart @30;
    lowSpeedLockout @31;
    plannerError @32;
-    ipasOverride @33;
+    ipasOverrideDEPRECATED @33;
    debugAlert @34;
    steerTempUnavailableMute @35;
    resumeRequired @36;
    preDriverDistracted @37;
    promptDriverDistracted @38;
    driverDistracted @39;
-    geofence @40;
-    driverMonitorOn @41;
-    driverMonitorOff @42;
+    geofenceDEPRECATED @40;
+    driverMonitorOnDEPRECATED @41;
+    driverMonitorOffDEPRECATED @42;
    preDriverUnresponsive @43;
    promptDriverUnresponsive @44;
    driverUnresponsive @45;
    belowSteerSpeed @46;
-    calibrationProgress @47;
+    calibrationProgressDEPRECATED @47;
    lowBattery @48;
-    invalidGiraffeHonda @49;
+    invalidGiraffeHondaDEPRECATED @49;
    vehicleModelInvalid @50;
    controlsFailed @51;
    sensorDataInvalid @52;
@@ -91,6 +91,34 @@ struct CarEvent @0x9b1657f34caf3ad3 {
    carUnrecognized @66;
    radarCommIssue @67;
    driverMonitorLowAcc @68;
+    invalidLkasSetting @69;
+    speedTooHigh @70;
+    laneChangeBlockedDEPRECATED @71;
+    relayMalfunction @72;
+    gasPressed @73;
+    stockFcw @74;
+    startup @75;
+    startupNoCar @76;
+    startupNoControl @77;
+    startupMaster @78;
+    fcw @79;
+    steerSaturated @80;
+    whitePandaUnsupported @81;
+    startupWhitePanda @82;
+    canErrorPersistent @83;
+    belowEngageSpeed @84;
+    noGps @85;
+    focusRecoverActive @86;
+    wrongCruiseMode @87;
+    neosUpdateRequired @88;
+
+    #dp
+    preLaneChangeLeftALC @89;
+    preLaneChangeRightALC @90;
+    laneChangeALC @91;
+    manualSteeringRequired @92;
+    manualSteeringRequiredBlinkersOn @93;
+    leadCarMoving @94;
  }
 }

@@ -119,14 +147,17 @@ struct CarState {
  brakeLights @19 :Bool;

  # steering wheel
-  steeringAngle @7 :Float32;   # deg
-  steeringRate @15 :Float32;   # deg/s
-  steeringTorque @8 :Float32;  # TODO: standardize units
+  steeringAngle @7 :Float32;       # deg
+  steeringRate @15 :Float32;       # deg/s
+  steeringTorque @8 :Float32;      # TODO: standardize units
  steeringTorqueEps @27 :Float32;  # TODO: standardize units
-  steeringPressed @9 :Bool;    # if the user is using the steering wheel
-  steeringRateLimited @29 :Bool;    # if the torque is limited by the rate limiter
+  steeringPressed @9 :Bool;        # if the user is using the steering wheel
+  steeringRateLimited @29 :Bool;   # if the torque is limited by the rate limiter
+  steerWarning @35 :Bool;          # temporary steer unavailble
+  steerError @36 :Bool;            # permanent steer error
  stockAeb @30 :Bool;
  stockFcw @31 :Bool;
+  espDisabled @32 :Bool;

  # cruise state
  cruiseState @10 :CruiseState;
@@ -151,6 +182,13 @@ struct CarState {
  # which packets this state came from
  canMonoTimes @12: List(UInt64);

+  # blindspot sensors
+  leftBlindspot @33 :Bool; # Is there something blocking the left lane change
+  rightBlindspot @34 :Bool; # Is there something blocking the right lane change
+
+  # dp
+  lkMode @37 :Bool;
+
  struct WheelSpeeds {
    # optional wheel speeds
    fl @0 :Float32;
@@ -304,6 +342,7 @@ struct CarControl {
      chimeWarning2 @5;
      chimeWarningRepeat @6;
      chimePrompt @7;
+      chimeWarning2Repeat @8;
    }
  }
 }
@@ -374,6 +413,7 @@ struct CarParams {
  radarTimeStep @45: Float32 = 0.05;  # time delta between radar updates, 20Hz is very standard
  communityFeature @46: Bool;  # true if a community maintained feature is detected
  fingerprintSource @49: FingerprintSource;
+  networkLocation @50 :NetworkLocation;  # Where Panda/C2 is integrated into the car's CAN network

  struct LateralParams {
    torqueBP @0 :List(Int32);
@@ -441,6 +481,7 @@ struct CarParams {
    noOutput @19;  # like silent but without silent CAN TXs
    hondaBoschHarness @20;
    volkswagenPq @21;
+    subaruLegacy @22;  # pre-Global platform
  }

  enum SteerControlType {
@@ -450,8 +491,9 @@ struct CarParams {

  enum TransmissionType {
    unknown @0;
-    automatic @1;
-    manual @2;
+    automatic @1;  # Traditional auto, including DSG
+    manual @2;  # True "stick shift" only
+    direct @3;  # Electric vehicle or other direct drive
  }

  struct CarFw {
@@ -468,14 +510,31 @@ struct CarParams {
    fwdCamera @3;
    engine @4;
    unknown @5;
+    transmission @8; # Transmission Control Module
+    srs @9; # airbag
+    gateway @10; # can gateway
+    hud @11; # heads up display
+    combinationMeter @12; # instrument cluster

    # Toyota only
    dsu @6;
    apgs @7;
+
+    # Honda only
+    vsa @13; # Vehicle Stability Assist
+    programmedFuelInjection @14;
+    electricBrakeBooster @15;
+    shiftByWire @16;
  }

  enum FingerprintSource {
    can @0;
    fw @1;
+    fixed @2;
+  }
+
+  enum NetworkLocation {
+    fwdCamera @0;  # Standard/default integration at LKAS camera
+    gateway @1;    # Integration at vehicle's CAN gateway
  }
 }
@@ -10,31 +10,3 @@ CXXFLAGS="-fPIC" ./configure

 make -j$(nproc)
 make install
-
-# manually build binaries statically
-g++ -std=gnu++11 -I./src -I./src -DKJ_HEADER_WARNINGS -DCAPNP_HEADER_WARNINGS -DCAPNP_INCLUDE_DIR=\"/usr/local/include\" -pthread -O2 -DNDEBUG -pthread -pthread -o .libs/capnp src/capnp/compiler/module-loader.o src/capnp/compiler/capnp.o  ./.libs/libcapnpc.a ./.libs/libcapnp.a ./.libs/libkj.a -lpthread -pthread
-
-g++ -std=gnu++11 -I./src -I./src -DKJ_HEADER_WARNINGS -DCAPNP_HEADER_WARNINGS -DCAPNP_INCLUDE_DIR=\"/usr/local/include\" -pthread -O2 -DNDEBUG -pthread -pthread -o .libs/capnpc-c++ src/capnp/compiler/capnpc-c++.o  ./.libs/libcapnp.a ./.libs/libkj.a -lpthread -pthread
-
-g++ -std=gnu++11 -I./src -I./src -DKJ_HEADER_WARNINGS -DCAPNP_HEADER_WARNINGS -DCAPNP_INCLUDE_DIR=\"/usr/local/include\" -pthread -O2 -DNDEBUG -pthread -pthread -o .libs/capnpc-capnp src/capnp/compiler/capnpc-capnp.o  ./.libs/libcapnp.a ./.libs/libkj.a -lpthread -pthread
-
-cp .libs/capnp /usr/local/bin/
-cp .libs/capnpc-c++ /usr/local/bin/
-cp .libs/capnpc-capnp /usr/local/bin/
-cp .libs/*.a /usr/local/lib
-
-cd /tmp
-echo "Installing c-capnp"
-git clone https://github.com/commaai/c-capnproto.git
-cd c-capnproto
-git submodule update --init --recursive
-autoreconf -f -i -s
-CXXFLAGS="-fPIC" ./configure
-make -j$(nproc)
-make install
-
-# manually build binaries statically
-gcc -fPIC -o .libs/capnpc-c compiler/capnpc-c.o compiler/schema.capnp.o compiler/str.o  ./.libs/libcapnp_c.a
-
-cp .libs/capnpc-c /usr/local/bin/
-cp .libs/*.a /usr/local/lib
@@ -127,6 +127,9 @@ struct FrameData {
  lensTruePos @14 :Float32;
  image @6 :Data;
  gainFrac @15 :Float32;
+  focusVal @16 :List(Int16);
+  focusConf @17 :List(UInt8);
+  sharpnessScore @18 :List(UInt16);

  frameType @7 :FrameType;
  timestampSof @8 :UInt64;
@@ -280,6 +283,8 @@ struct ThermalData {
  batteryVoltage @16 :Int32;
  usbOnline @12 :Bool;
  networkType @22 :NetworkType;
+  offroadPowerUsage @23 :UInt32;  # Power usage since going offroad in uWh
+  networkStrength @24 :NetworkStrength;

  fanSpeed @10 :UInt16;
  started @11 :Bool;
@@ -307,6 +312,14 @@ struct ThermalData {
    cell4G @4;
    cell5G @5;
  }
+
+  enum NetworkStrength {
+    unknown @0;
+    poor @1;
+    moderate @2;
+    good @3;
+    great @4;
+  }
 }

 struct HealthData {
@@ -340,6 +353,25 @@ struct HealthData {

  enum FaultType {
    relayMalfunction @0;
+    unusedInterruptHandled @1;
+    interruptRateCan1 @2;
+    interruptRateCan2 @3;
+    interruptRateCan3 @4;
+    interruptRateTach @5;
+    interruptRateGmlan @6;
+    interruptRateInterrupts @7;
+    interruptRateSpiDma @8;
+    interruptRateSpiCs @9;
+    interruptRateUart1 @10;
+    interruptRateUart2 @11;
+    interruptRateUart3 @12;
+    interruptRateUart5 @13;
+    interruptRateUartDma @14;
+    interruptRateUsb @15;
+    interruptRateTim1 @16;
+    interruptRateTim3 @17;
+    registerDivergent @18;
+    # Update max fault type in boardd when adding faults
  }

  enum HwType {
@@ -625,9 +657,11 @@ struct ModelData {
    brakeDisengageProb @2 :Float32;
    gasDisengageProb @3 :Float32;
    steerOverrideProb @4 :Float32;
+    desireState @5 :List(Float32);
  }

  struct LongitudinalData {
+    distances @2 :List(Float32);
    speeds @0 :List(Float32);
    accelerations @1 :List(Float32);
  }
@@ -765,6 +799,9 @@ struct PathPlan {
  laneChangeState @18 :LaneChangeState;
  laneChangeDirection @19 :LaneChangeDirection;

+  # dp
+  dpALCAllowed @20 :Bool;
+
  enum Desire {
    none @0;
    turnLeft @1;
@@ -789,6 +826,55 @@ struct PathPlan {
  }
 }

+struct LiveLocationKalman {
+
+  # More info on reference frames:
+  # https://github.com/commaai/openpilot/tree/master/common/transformations
+
+  positionECEF @0 : Measurement;
+  positionGeodetic @1 : Measurement;
+  velocityECEF @2 : Measurement;
+  velocityNED @3 : Measurement;
+  velocityDevice @4 : Measurement;
+  accelerationDevice @5: Measurement;
+
+
+  # These angles are all eulers and roll, pitch, yaw
+  # orientationECEF transforms to rot matrix: ecef_from_device
+  orientationECEF @6 : Measurement;
+  orientationNED @7 : Measurement;
+  angularVelocityDevice @8 : Measurement;
+
+  # orientationNEDCalibrated transforms to rot matrix: NED_from_calibrated
+  orientationNEDCalibrated @9 : Measurement;
+
+  # Calibrated frame is simply device frame
+  # aligned with the vehicle
+  velocityCalibrated @10 : Measurement;
+  accelerationCalibrated @11 : Measurement;
+  angularVelocityCalibrated @12 : Measurement;
+
+  gpsWeek @13 :Int32;
+  gpsTimeOfWeek @14 :Float64;
+  status @15 :Status;
+  unixTimestampMillis @16 :Int64;
+  inputsOK @17 :Bool = true;
+  posenetOK @18 :Bool = true;
+  gpsOK @19 :Bool = true;
+
+  enum Status {
+    uninitialized @0;
+    uncalibrated @1;
+    valid @2;
+  }
+
+  struct Measurement {
+    value @0 : List(Float64);
+    std @1 : List(Float64);
+    valid @2 : Bool;
+  }
+}
+
 struct LiveLocationData {
  status @0 :UInt8;

@@ -1715,12 +1801,14 @@ struct UiLayoutState {
  activeApp @0 :App;
  sidebarCollapsed @1 :Bool;
  mapEnabled @2 :Bool;
+  mockEngaged @3 :Bool;

  enum App {
    home @0;
    music @1;
    nav @2;
    settings @3;
+    none @4;
  }
 }

@@ -1819,6 +1907,7 @@ struct DMonitoringState {
  awarenessPassive @12 :Float32;
  isLowStd @13 :Bool;
  hiStdCount @14 :UInt32;
+  isPreview @15 :Bool;
 }

 struct Boot {
@@ -1876,6 +1965,16 @@ struct KalmanOdometry {
  rotStd @3 :List(Float32); # std rad/s in device frame
 }

+struct Sentinel {
+  enum SentinelType {
+    endOfSegment @0;
+    endOfRoute @1;
+    startOfSegment @2;
+    startOfRoute @3;
+  }
+  type @0 :SentinelType;
+}
+
 struct Event {
  # in nanoseconds?
  logMonoTime @0 :UInt64;
@@ -1901,7 +2000,7 @@ struct Event {
    sendcan @17 :List(CanData);
    logMessage @18 :Text;
    liveCalibration @19 :LiveCalibrationData;
-    androidLogEntry @20 :AndroidLogEntry;
+    androidLog @20 :AndroidLogEntry;
    gpsLocation @21 :GpsLocationData;
    carState @22 :Car.CarState;
    carControl @23 :Car.CarControl;
@@ -1932,7 +2031,7 @@ struct Event {
    gpsLocationExternal @48 :GpsLocationData;
    location @49 :LiveLocationData;
    uiNavigationEvent @50 :UiNavigationEvent;
-    liveLocationKalman @51 :LiveLocationData;
+    liveLocationKalmanDEPRECATED @51 :LiveLocationData;
    testJoystick @52 :Joystick;
    orbOdometry @53 :OrbOdometry;
    orbFeatures @54 :OrbFeatures;
@@ -1952,5 +2051,83 @@ struct Event {
    carParams @69: Car.CarParams;
    frontFrame @70: FrameData;
    dMonitoringState @71: DMonitoringState;
+    liveLocationKalman @72 :LiveLocationKalman;
+    sentinel @73 :Sentinel;
+    dragonConf @74 :DragonConf;
  }
 }
+
+# dp
+struct DragonConf {
+  dpAtl @0 :Bool;
+  dpAppWaze @1 :Bool;
+  dpAppWazeManual @2 :Int8;
+  dpDashcam @3 :Bool;
+  dpDashcamHoursStored @4 :UInt8;
+  dpAutoShutdown @5 :Bool;
+  dpAutoShutdownIn @6 :UInt16;
+  dpLogger @7 :Bool;
+  dpAthenad @8 :Bool;
+  dpUploader @9 :Bool;
+  dpUploadOnMobile @10 :Bool;
+  dpUploadOnHotspot @11 :Bool;
+  dpUpdated @12 :Bool;
+  dpHotspotOnBoot @13 :Bool;
+  dpLatCtrl @14 :Bool;
+  dpSteeringLimitAlert @15 :Bool;
+  dpSteeringOnSignal @16 :Bool;
+  dpSignalOffDelay @17 :UInt8;
+  dpAssistedLcMinMph @18 :UInt8;
+  dpAutoLc @19 :Bool;
+  dpAutoLcCont @20 :Bool;
+  dpAutoLcMinMph @21 :UInt8;
+  dpAutoLcDelay @22 :UInt8;
+  dpAllowGas @23 :Bool;
+  dpSlowOnCurve @24 :Bool;
+  dpMaxCtrlSpeed @25 :Float32;
+  dpLeadCarAlert @26 :Bool;
+  dpDynamicFollow @27 :UInt8;
+  dpDriverMonitor @28 :Bool;
+  dpSteeringMonitor @29 :Bool;
+  dpGearCheck @30 :Bool;
+  dpTempMonitor @31 :Bool;
+  dpDrivingUi @32 :Bool;
+  dpUiScreenOffReversing @33 :Bool;
+  dpUiScreenOffDriving @34 :Bool;
+  dpUiSpeed @35 :Bool;
+  dpUiEvent @36 :Bool;
+  dpUiMaxSpeed @37 :Bool;
+  dpUiFace @38 :Bool;
+  dpUiLane @39 :Bool;
+  dpUiPath @40 :Bool;
+  dpUiLead @41 :Bool;
+  dpUiDev @42 :Bool;
+  dpUiBlinker @43 :Bool;
+  dpUiBrightness @44 :UInt8;
+  dpUiVolumeBoost @45 :Int8;
+  dpAppAutoUpdate @46 :Bool;
+  dpAppExtGps @47 :Bool;
+  dpAppTomtom @48 :Bool;
+  dpAppTomtomAuto @49 :Bool;
+  dpAppTomtomManual @50 :Int8;
+  dpAppAutonavi @51 :Bool;
+  dpAppAutonaviAuto @52 :Bool;
+  dpAppAutonaviManual @53 :Int8;
+  dpAppAegis @54 :Bool;
+  dpAppAegisAuto @55 :Bool;
+  dpAppAegisManual @56 :Int8;
+  dpAppMixplorer @57 :Bool;
+  dpAppMixplorerManual @58 :Int8;
+  dpToyotaSngResponse @59 :Float32;
+  dpToyotaLdw @60 :Bool;
+  dpToyotaSng @61 :Bool;
+  dpIpAddr @62 :Text;
+  dpCameraOffset @63 :Int8;
+  dpLocale @64 :Text;
+  dpChargingCtrl @65 :Bool;
+  dpChargingAt @66 :UInt8;
+  dpDischargingAt @67 :UInt8;
+  dpIsUpdating @68 :Bool;
+  dpThermalStarted @69 :Bool;
+  dpThermalOverheat @70 :Bool;
+}
@@ -19,10 +19,15 @@ except ImportError:

 context = Context()

-def new_message():
+def new_message(service=None, size=None):
  dat = log.Event.new_message()
  dat.logMonoTime = int(sec_since_boot() * 1e9)
  dat.valid = True
+  if service is not None:
+    if size is None:
+      dat.init(service)
+    else:
+      dat.init(service, size)
  return dat

 def pub_sock(endpoint):
@@ -148,12 +153,11 @@ class SubMaster():
        self.sock[s] = sub_sock(s, poller=self.poller, addr=addr, conflate=True)
      self.freq[s] = service_list[s].frequency

-      data = new_message()
      try:
-        data.init(s)
-      except capnp.lib.capnp.KjException:
+        data = new_message(s)
+      except capnp.lib.capnp.KjException:  # pylint: disable=c-extension-no-member
        # lists
-        data.init(s, 0)
+        data = new_message(s, 0)

      self.data[s] = getattr(data, s)
      self.logMonoTime[s] = 0
@@ -143,7 +143,11 @@ int MSGQPubSocket::connect(Context *context, std::string endpoint){
  assert(context);

  q = new msgq_queue_t;
-  msgq_new_queue(q, endpoint.c_str(), DEFAULT_SEGMENT_SIZE);
+  int r = msgq_new_queue(q, endpoint.c_str(), DEFAULT_SEGMENT_SIZE);
+  if (r != 0){
+    return r;
+  }
+
  msgq_init_publisher(q);

  return 0;
@@ -2,9 +2,15 @@
 #include "impl_zmq.hpp"
 #include "impl_msgq.hpp"

+#ifdef __APPLE__
+const bool MUST_USE_ZMQ = true;
+#else
+const bool MUST_USE_ZMQ = false;
+#endif
+
 Context * Context::create(){
  Context * c;
-  if (std::getenv("ZMQ")){
+  if (std::getenv("ZMQ") || MUST_USE_ZMQ){
    c = new ZMQContext();
  } else {
    c = new MSGQContext();
@@ -14,7 +20,7 @@ Context * Context::create(){

 SubSocket * SubSocket::create(){
  SubSocket * s;
-  if (std::getenv("ZMQ")){
+  if (std::getenv("ZMQ") || MUST_USE_ZMQ){
    s = new ZMQSubSocket();
  } else {
    s = new MSGQSubSocket();
@@ -60,7 +66,7 @@ SubSocket * SubSocket::create(Context * context, std::string endpoint, std::stri

 PubSocket * PubSocket::create(){
  PubSocket * s;
-  if (std::getenv("ZMQ")){
+  if (std::getenv("ZMQ") || MUST_USE_ZMQ){
    s = new ZMQPubSocket();
  } else {
    s = new MSGQPubSocket();
@@ -82,7 +88,7 @@ PubSocket * PubSocket::create(Context * context, std::string endpoint){

 Poller * Poller::create(){
  Poller * p;
-  if (std::getenv("ZMQ")){
+  if (std::getenv("ZMQ") || MUST_USE_ZMQ){
    p = new ZMQPoller();
  } else {
    p = new MSGQPoller();
@@ -1,7 +1,10 @@
 #pragma once
 #include <cstddef>
-#include <vector>
+#include <map>
 #include <string>
+#include <vector>
+#include <capnp/serialize.h>
+#include "../gen/cpp/log.capnp.h"

 #define MSG_MULTIPLE_PUBLISHERS 100

@@ -54,3 +57,36 @@ public:
  static Poller * create(std::vector<SubSocket*> sockets);
  virtual ~Poller(){};
 };
+
+class SubMaster {
+ public:
+  SubMaster(const std::initializer_list<const char *> &service_list,
+            const char *address = nullptr, const std::initializer_list<const char *> &ignore_alive = {});
+  int update(int timeout = 1000);
+  inline bool allAlive(const std::initializer_list<const char *> &service_list = {}) { return all_(service_list, false, true); }
+  inline bool allValid(const std::initializer_list<const char *> &service_list = {}) { return all_(service_list, true, false); }
+  inline bool allAliveAndValid(const std::initializer_list<const char *> &service_list = {}) { return all_(service_list, true, true); }
+  bool updated(const char *name) const;
+  void drain();
+  cereal::Event::Reader &operator[](const char *name);
+  ~SubMaster();
+
+ private:
+  bool all_(const std::initializer_list<const char *> &service_list, bool valid, bool alive);
+  Poller *poller_ = nullptr;
+  uint64_t frame_ = 0;
+  struct SubMessage;
+  std::map<SubSocket *, SubMessage *> messages_;
+  std::map<std::string, SubMessage *> services_;
+};
+
+class PubMaster {
+ public:
+  PubMaster(const std::initializer_list<const char *> &service_list);
+  inline int send(const char *name, capnp::byte *data, size_t size) { return sockets_.at(name)->send((char *)data, size); }
+  int send(const char *name, capnp::MessageBuilder &msg);
+  ~PubMaster();
+
+ private:
+  std::map<std::string, PubSocket *> sockets_;
+};
@@ -30,11 +30,12 @@ class BuildExtWithoutPlatformSuffix(build_ext):


 sourcefiles = ['messaging_pyx.pyx']
-extra_compile_args = ["-std=c++11"]
+extra_compile_args = ["-std=c++14"]
 libraries = ['zmq']
 ARCH = subprocess.check_output(["uname", "-m"], encoding='utf8').rstrip()  # pylint: disable=unexpected-keyword-arg

-if ARCH == "aarch64":
+if ARCH == "aarch64" and os.path.isdir("/system"):
+  # android
  extra_compile_args += ["-Wno-deprecated-register"]
  libraries += ['gnustl_shared']

@@ -90,8 +90,10 @@ int msgq_new_queue(msgq_queue_t * q, const char * path, size_t size){
  auto fd = open(full_path, O_RDWR | O_CREAT, 0777);
  delete[] full_path;

-  if (fd < 0)
+  if (fd < 0) {
+    std::cout << "Warning, could not open: " << full_path << std::endl;
    return -1;
+  }

  int rc = ftruncate(fd, size + sizeof(msgq_header_t));
  if (rc < 0)
@@ -0,0 +1,162 @@
+#include <assert.h>
+#include <time.h>
+#include "messaging.hpp"
+#include "services.h"
+#ifdef __APPLE__
+#define CLOCK_BOOTTIME CLOCK_MONOTONIC
+#endif
+static inline uint64_t nanos_since_boot() {
+  struct timespec t;
+  clock_gettime(CLOCK_BOOTTIME, &t);
+  return t.tv_sec * 1000000000ULL + t.tv_nsec;
+}
+static const service *get_service(const char *name) {
+  for (const auto &it : services) {
+    if (strcmp(it.name, name) == 0) return &it;
+  }
+  return nullptr;
+}
+static inline bool inList(const std::initializer_list<const char *> &list, const char *value) {
+  for (auto &v : list) {
+    if (strcmp(value, v) == 0) return true;
+  }
+  return false;
+}
+
+class MessageContext {
+ public:
+  MessageContext() { ctx_ = Context::create(); }
+  ~MessageContext() { delete ctx_; }
+  Context *ctx_;
+};
+MessageContext ctx;
+
+struct SubMaster::SubMessage {
+  std::string name;
+  SubSocket *socket = nullptr;
+  int freq = 0;
+  bool updated = false, alive = false, valid = false, ignore_alive;
+  uint64_t rcv_time = 0, rcv_frame = 0;
+  void *allocated_msg_reader = nullptr;
+  capnp::FlatArrayMessageReader *msg_reader = nullptr;
+  kj::Array<capnp::word> buf;
+  cereal::Event::Reader event;
+};
+
+SubMaster::SubMaster(const std::initializer_list<const char *> &service_list, const char *address,
+                     const std::initializer_list<const char *> &ignore_alive) {
+  poller_ = Poller::create();
+  for (auto name : service_list) {
+    const service *serv = get_service(name);
+    assert(serv != nullptr);
+    SubSocket *socket = SubSocket::create(ctx.ctx_, name, address ? address : "127.0.0.1", true);
+    assert(socket != 0);
+    poller_->registerSocket(socket);
+    SubMessage *m = new SubMessage{
+        .socket = socket,
+        .freq = serv->frequency,
+        .ignore_alive = inList(ignore_alive, name),
+        .allocated_msg_reader = malloc(sizeof(capnp::FlatArrayMessageReader)),
+        .buf = kj::heapArray<capnp::word>(1024)};
+    messages_[socket] = m;
+    services_[name] = m;
+  }
+}
+
+int SubMaster::update(int timeout) {
+  if (++frame_ == UINT64_MAX) frame_ = 1;
+  for (auto &kv : messages_) kv.second->updated = false;
+
+  int updated = 0;
+  auto sockets = poller_->poll(timeout);
+  uint64_t current_time = nanos_since_boot();
+  for (auto s : sockets) {
+    Message *msg = s->receive(true);
+    if (msg == nullptr) continue;
+
+    SubMessage *m = messages_.at(s);
+    const size_t size = (msg->getSize() / sizeof(capnp::word)) + 1;
+    if (m->buf.size() < size) {
+      m->buf = kj::heapArray<capnp::word>(size);
+    }
+    memcpy(m->buf.begin(), msg->getData(), msg->getSize());
+    delete msg;
+
+    if (m->msg_reader) {
+      m->msg_reader->~FlatArrayMessageReader();
+    }
+    m->msg_reader = new (m->allocated_msg_reader) capnp::FlatArrayMessageReader(kj::ArrayPtr<capnp::word>(m->buf.begin(), size));
+    m->event = m->msg_reader->getRoot<cereal::Event>();
+    m->updated = true;
+    m->rcv_time = current_time;
+    m->rcv_frame = frame_;
+    m->valid = m->event.getValid();
+
+    ++updated;
+  }
+
+  for (auto &kv : messages_) {
+    SubMessage *m = kv.second;
+    m->alive = (m->freq <= (1e-5) || ((current_time - m->rcv_time) * (1e-9)) < (10.0 / m->freq));
+  }
+  return updated;
+}
+
+bool SubMaster::all_(const std::initializer_list<const char *> &service_list, bool valid, bool alive) {
+  int found = 0;
+  for (auto &kv : messages_) {
+    SubMessage *m = kv.second;
+    if (service_list.size() == 0 || inList(service_list, m->name.c_str())) {
+      found += (!valid || m->valid) && (!alive || (m->alive && !m->ignore_alive));
+    }
+  }
+  return service_list.size() == 0 ? found == messages_.size() : found == service_list.size();
+}
+
+void SubMaster::drain() {
+  while (true) {
+    auto polls = poller_->poll(0);
+    if (polls.size() == 0)
+      break;
+
+    for (auto sock : polls) {
+      Message *msg = sock->receive(true);
+      delete msg;
+    }
+  }
+}
+
+bool SubMaster::updated(const char *name) const { return services_.at(name)->updated; }
+cereal::Event::Reader &SubMaster::operator[](const char *name) { return services_.at(name)->event; };
+
+SubMaster::~SubMaster() {
+  delete poller_;
+  for (auto &kv : messages_) {
+    SubMessage *m = kv.second;
+    if (m->msg_reader) {
+      m->msg_reader->~FlatArrayMessageReader();
+    }
+    free(m->allocated_msg_reader);
+    delete m->socket;
+    delete m;
+  }
+}
+
+PubMaster::PubMaster(const std::initializer_list<const char *> &service_list) {
+  for (auto name : service_list) {
+    assert(get_service(name) != nullptr);
+    PubSocket *socket = PubSocket::create(ctx.ctx_, name);
+    assert(socket);
+    sockets_[name] = socket;
+  }
+}
+
+int PubMaster::send(const char *name, capnp::MessageBuilder &msg) {
+  auto words = capnp::messageToFlatArray(msg);
+  auto bytes = words.asBytes();
+  return send(name, bytes.begin(), bytes.size());
+}
+
+PubMaster::~PubMaster() {
+  for (auto s : sockets_) delete s.second;
+}
@@ -19,7 +19,7 @@ controlsState: [8007, true, 100., 100]
 model: [8009, true, 20., 5]
 features: [8010, true, 0.]
 health: [8011, true, 2., 1]
-radarState: [8012, true, 20.]
+radarState: [8012, true, 20., 5]
 #liveUI: [8014, true, 0.]
 encodeIdx: [8015, true, 20.]
 liveTracks: [8016, true, 20.]
@@ -31,7 +31,7 @@ carState: [8021, true, 100., 10]
 # 8022 is reserved for sshd
 carControl: [8023, true, 100., 10]
 plan: [8024, true, 20.]
-liveLocation: [8025, true, 0.]
+liveLocation: [8025, true, 0., 1]
 gpsLocation: [8026, true, 1., 1]
 ethernetData: [8027, true, 0.]
 navUpdate: [8028, true, 0.]
@@ -57,7 +57,7 @@ orbslamCorrection: [8050, true, 0.]
 liveLocationCorrected: [8051, true, 0.]
 orbObservation: [8052, true, 0.]
 applanixLocation: [8053, true, 0.]
-liveLocationKalman: [8054, true, 0.]
+liveLocationKalman: [8054, true, 0., 1]
 uiNavigationEvent: [8055, true, 0.]
 orbOdometry: [8057, true, 0.]
 orbFeatures: [8058, false, 0.]
@@ -76,6 +76,9 @@ carEvents: [8070, true, 1., 1]
 carParams: [8071, true, 0.02, 1]
 frontFrame: [8072, true, 10.]
 dMonitoringState: [8073, true, 5., 1]
+offroadLayout: [8074, false, 0.]
+
+dragonConf: [8075, false, 2.]

 testModel: [8040, false, 0.]
 testLiveLocation: [8045, false, 0.]
@@ -103,19 +106,31 @@ testJoystick: [8056, false, 0.]
 # gpsd -- publishes EON's gps
 #   publishes: gpsNMEA

-# visiond -- talks to the cameras, runs the model, saves the videos
-#   publishes:  frame, model, driverMonitoring, cameraOdometry, thumbnail
+# camerad -- publishes camera frames
+#   publishes: frame, frontFrame, thumbnail
+#   subscribes: driverState
+
+# dmonitoringmodeld -- runs face detection on camera frames
+#   publishes: driverState

 # **** stateful data transformers ****

+# modeld -- runs & publishes the model 
+#   publishes: model, cameraOdometry
+#   subscribes: liveCalibration, pathPlan
+
 # plannerd -- decides where to drive the car
 #   subscribes: carState, model, radarState, controlsState, liveParameters
 #   publishes:  plan, pathPlan, liveMpc, liveLongitudinalMpc

 # controlsd -- drives the car by sending CAN messages to panda
-#   subscribes: can, thermal, health, plan, pathPlan, driverMonitoring, liveCalibration
+#   subscribes: can, thermal, health, plan, pathPlan, dMonitoringState, liveCalibration, model
 #   publishes:  carState, carControl, sendcan, controlsState, carEvents, carParams

+# dmonitoringd -- processes driver monitoring data and publishes driver awareness
+#   subscribes: driverState, liveCalibration, carState, model, gpsLocation
+#   publishes: dMonitoringState
+
 # radard -- processes the radar and vision data
 #   subscribes: can, controlsState, model, liveParameters
 #   publishes:  radarState, liveTracks
@@ -0,0 +1,8 @@
+comment: false
+coverage:
+  status:
+    project:
+      default:
+        informational: true
+    patch: off
+
@@ -8,6 +8,7 @@ import random
 from cereal import log

 NetworkType = log.ThermalData.NetworkType
+NetworkStrength = log.ThermalData.NetworkStrength

 ANDROID = os.path.isfile('/EON')

@@ -21,10 +22,10 @@ def get_imei(slot):
  if slot not in ("0", "1"):
    raise ValueError("SIM slot must be 0 or 1")

-  ret = parse_service_call_string(service_call(["iphonesubinfo", "3" ,"i32", str(slot)]))
+  ret = parse_service_call_string(service_call(["iphonesubinfo", "3" , "i32", str(slot)]))
  if not ret:
    # allow non android to be identified differently
-    ret = "%015d" % random.randint(0, 1<<32)
+    ret = "%015d" % random.randint(0, 1 << 32)
  return ret

 def get_serial():
@@ -128,3 +129,154 @@ def get_network_type():
      19: NetworkType.cell4G
    }
    return cell_networks.get(cell_check, NetworkType.none)
+
+def get_network_strength(network_type):
+  network_strength = NetworkStrength.unknown
+
+  # from SignalStrength.java
+  def get_lte_level(rsrp, rssnr):
+    INT_MAX = 2147483647
+    if rsrp == INT_MAX:
+      lvl_rsrp = NetworkStrength.unknown
+    elif rsrp >= -95:
+      lvl_rsrp = NetworkStrength.great
+    elif rsrp >= -105:
+      lvl_rsrp = NetworkStrength.good
+    elif rsrp >= -115:
+      lvl_rsrp = NetworkStrength.moderate
+    else:
+      lvl_rsrp = NetworkStrength.poor
+    if rssnr == INT_MAX:
+      lvl_rssnr = NetworkStrength.unknown
+    elif rssnr >= 45:
+      lvl_rssnr = NetworkStrength.great
+    elif rssnr >= 10:
+      lvl_rssnr = NetworkStrength.good
+    elif rssnr >= -30:
+      lvl_rssnr = NetworkStrength.moderate
+    else:
+      lvl_rssnr = NetworkStrength.poor
+    return max(lvl_rsrp, lvl_rssnr)
+
+  def get_tdscdma_level(tdscmadbm):
+    lvl = NetworkStrength.unknown
+    if tdscmadbm > -25:
+      lvl = NetworkStrength.unknown
+    elif tdscmadbm >= -49:
+      lvl = NetworkStrength.great
+    elif tdscmadbm >= -73:
+      lvl = NetworkStrength.good
+    elif tdscmadbm >= -97:
+      lvl = NetworkStrength.moderate
+    elif tdscmadbm >= -110:
+      lvl = NetworkStrength.poor
+    return lvl
+
+  def get_gsm_level(asu):
+    if asu <= 2 or asu == 99:
+      lvl = NetworkStrength.unknown
+    elif asu >= 12:
+      lvl = NetworkStrength.great
+    elif asu >= 8:
+      lvl = NetworkStrength.good
+    elif asu >= 5:
+      lvl = NetworkStrength.moderate
+    else:
+      lvl = NetworkStrength.poor
+    return lvl
+
+  def get_evdo_level(evdodbm, evdosnr):
+    lvl_evdodbm = NetworkStrength.unknown
+    lvl_evdosnr = NetworkStrength.unknown
+    if evdodbm >= -65:
+      lvl_evdodbm = NetworkStrength.great
+    elif evdodbm >= -75:
+      lvl_evdodbm = NetworkStrength.good
+    elif evdodbm >= -90:
+      lvl_evdodbm = NetworkStrength.moderate
+    elif evdodbm >= -105:
+      lvl_evdodbm = NetworkStrength.poor
+    if evdosnr >= 7:
+      lvl_evdosnr = NetworkStrength.great
+    elif evdosnr >= 5:
+      lvl_evdosnr = NetworkStrength.good
+    elif evdosnr >= 3:
+      lvl_evdosnr = NetworkStrength.moderate
+    elif evdosnr >= 1:
+      lvl_evdosnr = NetworkStrength.poor
+    return max(lvl_evdodbm, lvl_evdosnr)
+
+  def get_cdma_level(cdmadbm, cdmaecio):
+    lvl_cdmadbm = NetworkStrength.unknown
+    lvl_cdmaecio = NetworkStrength.unknown
+    if cdmadbm >= -75:
+      lvl_cdmadbm = NetworkStrength.great
+    elif cdmadbm >= -85:
+      lvl_cdmadbm = NetworkStrength.good
+    elif cdmadbm >= -95:
+      lvl_cdmadbm = NetworkStrength.moderate
+    elif cdmadbm >= -100:
+      lvl_cdmadbm = NetworkStrength.poor
+    if cdmaecio >= -90:
+      lvl_cdmaecio = NetworkStrength.great
+    elif cdmaecio >= -110:
+      lvl_cdmaecio = NetworkStrength.good
+    elif cdmaecio >= -130:
+      lvl_cdmaecio = NetworkStrength.moderate
+    elif cdmaecio >= -150:
+      lvl_cdmaecio = NetworkStrength.poor
+    return max(lvl_cdmadbm, lvl_cdmaecio)
+
+  if network_type == NetworkType.none:
+    return network_strength
+  if network_type == NetworkType.wifi:
+    out = subprocess.check_output('dumpsys connectivity', shell=True).decode('utf-8')
+    network_strength = NetworkStrength.unknown
+    for line in out.split('\n'):
+      signal_str = "SignalStrength: "
+      if signal_str in line:
+        lvl_idx_start = line.find(signal_str) + len(signal_str)
+        lvl_idx_end = line.find(']', lvl_idx_start)
+        lvl = int(line[lvl_idx_start : lvl_idx_end])
+        if lvl >= -50:
+          network_strength = NetworkStrength.great
+        elif lvl >= -60:
+          network_strength = NetworkStrength.good
+        elif lvl >= -70:
+          network_strength = NetworkStrength.moderate
+        else:
+          network_strength = NetworkStrength.poor
+    return network_strength
+  else:
+    # check cell strength
+    out = subprocess.check_output('dumpsys telephony.registry', shell=True).decode('utf-8')
+    for line in out.split('\n'):
+      if "mSignalStrength" in line:
+        arr = line.split(' ')
+        ns = 0
+        if ("gsm" in arr[14]):
+          rsrp = int(arr[9])
+          rssnr = int(arr[11])
+          ns = get_lte_level(rsrp, rssnr)
+          if ns == NetworkStrength.unknown:
+            tdscmadbm = int(arr[13])
+            ns = get_tdscdma_level(tdscmadbm)
+            if ns == NetworkStrength.unknown:
+              asu = int(arr[1])
+              ns = get_gsm_level(asu)
+        else:
+          cdmadbm = int(arr[3])
+          cdmaecio = int(arr[4])
+          evdodbm = int(arr[5])
+          evdosnr = int(arr[7])
+          lvl_cdma = get_cdma_level(cdmadbm, cdmaecio)
+          lvl_edmo = get_evdo_level(evdodbm, evdosnr)
+          if lvl_edmo == NetworkStrength.unknown:
+            ns = lvl_cdma
+          elif lvl_cdma == NetworkStrength.unknown:
+            ns = lvl_edmo
+          else:
+            ns = min(lvl_cdma, lvl_edmo)
+        network_strength = max(network_strength, ns)
+
+    return network_strength
@@ -39,4 +39,3 @@ def api_get(endpoint, method='GET', timeout=None, access_token=None, **params):
  headers['User-Agent'] = "openpilot-" + version

  return requests.request(method, backend+endpoint, timeout=timeout, headers = headers, params=params)
-
@@ -6,14 +6,14 @@ import shutil
 from common.basedir import BASEDIR
 from selfdrive.swaglog import cloudlog

-android_packages = ("ai.comma.plus.offroad", "ai.comma.plus.frame")
+android_packages = ("ai.comma.plus.offroad",)

 def get_installed_apks():
  dat = subprocess.check_output(["pm", "list", "packages", "-f"], encoding='utf8').strip().split("\n")
  ret = {}
  for x in dat:
    if x.startswith("package:"):
-      v,k = x.split("package:")[1].split("=")
+      v, k = x.split("package:")[1].split("=")
      ret[k] = v
  return ret

@@ -26,17 +26,16 @@ def install_apk(path):
  os.remove(install_path)
  return ret == 0

-def start_frame():
+def start_offroad():
  set_package_permissions()
-  system("am start -n ai.comma.plus.frame/.MainActivity")
+  system("am start -n ai.comma.plus.offroad/.MainActivity")

 def set_package_permissions():
  pm_grant("ai.comma.plus.offroad", "android.permission.ACCESS_FINE_LOCATION")
  pm_grant("ai.comma.plus.offroad", "android.permission.READ_PHONE_STATE")
+  pm_grant("ai.comma.plus.offroad", "android.permission.READ_EXTERNAL_STORAGE")
  appops_set("ai.comma.plus.offroad", "SU", "allow")
  appops_set("ai.comma.plus.offroad", "WIFI_SCAN", "allow")
-  appops_set("ai.comma.plus.offroad", "READ_EXTERNAL_STORAGE", "allow")
-  appops_set("ai.comma.plus.offroad", "WRITE_EXTERNAL_STORAGE", "allow")

 def appops_set(package, op, mode):
  system(f"LD_LIBRARY_PATH= appops set {package} {op} {mode}")
@@ -96,4 +95,3 @@ def pm_apply_packages(cmd):

 if __name__ == "__main__":
  update_apks()
-
@@ -8,4 +8,3 @@ if ANDROID:
 else:
  PERSIST = os.path.join(BASEDIR, "persist")
  PARAMS = os.path.join(BASEDIR, "persist", "params")
-
@@ -0,0 +1,28 @@
+#!/usr/bin/env python3.7
+import subprocess
+from cereal import car
+from common.params import Params
+params = Params()
+
+def is_online():
+  try:
+    return not subprocess.call(["ping", "-W", "4", "-c", "1", "117.28.245.92"])
+  except ProcessLookupError:
+    return False
+
+def common_controller_ctrl(enabled, dragon_lat_ctrl, dragon_enable_steering_on_signal, blinker_on, steer_req):
+  if enabled:
+    if (dragon_enable_steering_on_signal and blinker_on) or not dragon_lat_ctrl:
+      steer_req = 0 if isinstance(steer_req, int) else False
+  return steer_req
+
+def common_interface_atl(ret, atl):
+  # dp
+  enable_acc = ret.cruiseState.enabled
+  if atl and ret.cruiseState.available:
+    enable_acc = True
+    if ret.gearShifter in [car.CarState.GearShifter.reverse, car.CarState.GearShifter.park]:
+      enable_acc = False
+    if ret.seatbeltUnlatched or ret.doorOpen:
+      enable_acc = False
+  return enable_acc
@@ -0,0 +1,223 @@
+#!/usr/bin/env python3.7
+import os
+import json
+import time
+from math import floor
+
+confs = [
+  {'name': 'dp_atl', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct'], 'update_once': True},
+  # waze
+  {'name': 'dp_app_waze', 'default':  False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_waze_manual', 'default': 0, 'type': 'Int8', 'min': -1, 'max': 1, 'depends': [{'name': 'dp_app_waze', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  # dashcam related
+  {'name': 'dp_dashcam', 'default': 0, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_dashcam_hours_stored', 'default': 24, 'type': 'UInt8', 'min': 1, 'max': 255, 'depends': [{'name': 'dp_dashcam', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  # auto shutdown related
+  {'name': 'dp_auto_shutdown', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_auto_shutdown_in', 'default': 90, 'type': 'UInt16', 'min': 1, 'max': 65535, 'depends': [{'name': 'dp_auto_shutdown', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  # service
+  {'name': 'dp_logger', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_athenad', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_uploader', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_upload_on_mobile', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_uploader', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_upload_on_hotspot', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_uploader', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_updated', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_hotspot_on_boot', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  # lat ctrl
+  {'name': 'dp_lat_ctrl', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_steering_limit_alert', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_lat_ctrl', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_steering_on_signal', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_lat_ctrl', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_signal_off_delay', 'default': 0, 'type': 'UInt8', 'min': 0, 'max': 10, 'depends': [{'name': 'dp_steering_on_signal', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  # assist/auto lane change
+  {'name': 'dp_assisted_lc_min_mph', 'default': 45, 'type': 'UInt8', 'min': 0, 'max': 255, 'depends': [{'name': 'dp_steering_on_signal', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_auto_lc', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_steering_on_signal', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_auto_lc_cont', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_auto_lc', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_auto_lc_min_mph', 'default': 60, 'type': 'UInt8', 'min': 0, 'max': 255, 'depends': [{'name': 'dp_auto_lc', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_auto_lc_delay', 'default': 3, 'type': 'UInt8', 'min': 0, 'max': 10, 'depends': [{'name': 'dp_auto_lc', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  # long ctrl
+  {'name': 'dp_allow_gas', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_slow_on_curve', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_max_ctrl_speed', 'default': 92, 'type': 'Float32', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_lead_car_alert', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_dynamic_follow', 'default': 0, 'type': 'UInt8', 'min': 0, 'max': 4, 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  # safety
+  {'name': 'dp_driver_monitor', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_steering_monitor', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_driver_monitor', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_gear_check', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_temp_monitor', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  # UIs
+  {'name': 'dp_driving_ui', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_screen_off_reversing', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_screen_off_driving', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_app_waze', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_speed', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_driving_ui', 'vals': [True]}, {'name': 'dp_ui_screen_off_driving', 'vals': [False]}, {'name': 'dp_app_waze', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_event', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_driving_ui', 'vals': [True]}, {'name': 'dp_ui_screen_off_driving', 'vals': [False]}, {'name': 'dp_app_waze', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_max_speed', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_driving_ui', 'vals': [True]}, {'name': 'dp_ui_screen_off_driving', 'vals': [False]}, {'name': 'dp_app_waze', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_face', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_driving_ui', 'vals': [True]}, {'name': 'dp_driver_monitor', 'vals': [True]}, {'name': 'dp_ui_screen_off_driving', 'vals': [False]}, {'name': 'dp_app_waze', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_lane', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_driving_ui', 'vals': [True]}, {'name': 'dp_ui_screen_off_driving', 'vals': [False]}, {'name': 'dp_app_waze', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_path', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_driving_ui', 'vals': [True]}, {'name': 'dp_ui_screen_off_driving', 'vals': [False]}, {'name': 'dp_app_waze', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_lead', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_driving_ui', 'vals': [True]}, {'name': 'dp_ui_screen_off_driving', 'vals': [False]}, {'name': 'dp_app_waze', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_dev', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_driving_ui', 'vals': [True]}, {'name': 'dp_ui_screen_off_driving', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_blinker', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_driving_ui', 'vals': [True]}, {'name': 'dp_ui_screen_off_driving', 'vals': [False]}, {'name': 'dp_app_waze', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_brightness', 'default': 0, 'type': 'UInt8', 'min': 0, 'max': 100, 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_volume_boost', 'default': 0, 'type': 'Int8', 'min': -100, 'max': 100, 'conf_type': ['param', 'struct']},
+  # Apps
+  {'name': 'dp_app_auto_update', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_ext_gps', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_tomtom', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_tomtom_auto', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_app_tomtom', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_tomtom_manual', 'default': 0, 'type': 'Int8', 'min': -1, 'max': 1, 'depends': [{'name': 'dp_app_tomtom', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_autonavi', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_autonavi_auto', 'default':  False, 'type': 'Bool', 'depends': [{'name': 'dp_app_autonavi', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_autonavi_manual', 'default': 0, 'type': 'Int8', 'min': -1, 'max': 1, 'depends': [{'name': 'dp_app_autonavi', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_aegis', 'default':  False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_aegis_auto', 'default':  False, 'type': 'Bool', 'depends': [{'name': 'dp_app_aegis', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_aegis_manual', 'default': 0, 'type': 'Int8', 'min': -1, 'max': 1, 'depends': [{'name': 'dp_app_aegis', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_mixplorer', 'default':  False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_app_mixplorer_manual', 'default': 0, 'type': 'Int8', 'min': -1, 'max': 1, 'depends': [{'name': 'dp_app_mixplorer', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  # toyota
+  {'name': 'dp_toyota_sng_response', 'default': 0., 'type': 'Float32', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_toyota_ldw', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_toyota_sng', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  # custom car
+  {'name': 'dp_car_selected', 'default': '', 'type': 'Text', 'conf_type': ['param']},
+  {'name': 'dp_car_list', 'default': '', 'type': 'Text', 'conf_type': ['param']},
+  {'name': 'dp_car_detected', 'default': '', 'type': 'Text', 'conf_type': ['param']},
+  #misc
+  {'name': 'dp_ip_addr', 'default': '', 'type': 'Text', 'conf_type': ['param', 'struct'], 'update_once': True},
+  {'name': 'dp_full_speed_fan', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_last_modified', 'default': str(floor(time.time())), 'type': 'Text', 'conf_type': ['param']},
+  {'name': 'dp_camera_offset', 'default': 6, 'type': 'Int8', 'min': -255, 'max': 255, 'conf_type': ['param', 'struct']},
+
+  {'name': 'dp_locale', 'default': '', 'type': 'Text', 'conf_type': ['param', 'struct'], 'update_once': True},
+  {'name': 'dp_disable_relay', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_charging_ctrl', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_charging_at', 'default': 60, 'type': 'UInt8', 'min': 0, 'max': 100, 'depends': [{'name': 'dp_charging_ctrl', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_discharging_at', 'default': 70, 'type': 'UInt8', 'min': 0, 'max': 100, 'depends': [{'name': 'dp_charging_ctrl', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_reg', 'default': True, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_is_updating', 'default': False, 'type': 'Bool', 'set_param_only': True, 'conf_type': ['param', 'struct']},
+
+  # including thermal data
+  {'name': 'dp_thermal_started', 'default': False, 'type': 'Bool', 'conf_type': ['struct']},
+  {'name': 'dp_thermal_overheat', 'default': False, 'type': 'Bool', 'conf_type': ['struct']},
+]
+
+def get_definition(name):
+  for conf in confs:
+    if conf['name'] == name:
+      return conf
+  return None
+
+def to_param_val(name, val):
+  conf = get_definition(name)
+  if conf is not None:
+    type = conf['type'].lower()
+    try:
+      if 'bool' in type:
+        val = '1' if val else '0'
+      elif 'int' in type:
+        val = int(val)
+      elif 'float' in type:
+        val = float(val)
+      return str(val)
+    except (ValueError, TypeError):
+      return ''
+  return ''
+
+def to_struct_val(name, val):
+  conf = get_definition(name)
+  if conf is not None:
+    try:
+      type = conf['type'].lower()
+      if 'bool' in type:
+        val = True if val == '1' else False
+      elif 'int' in type:
+        val = int(val)
+      elif 'float' in type:
+        val = float(val)
+      return val
+    except (ValueError, TypeError):
+      return None
+  return None
+
+'''
+function to convert param name into struct name.
+'''
+def get_struct_name(snake_str):
+  components = snake_str.split('_')
+  # We capitalize the first letter of each component except the first one
+  # with the 'title' method and join them together.
+  return components[0] + ''.join(x.title() for x in components[1:])
+
+'''
+function to generate struct for log.capnp
+'''
+def gen_log_struct():
+  count = 0
+  str = "# dp\n"
+  str += "struct DragonConf {\n"
+  for conf in confs:
+    name = get_struct_name(conf['name'])
+    if 'struct' in conf['conf_type']:
+      str += f"  {name} @{count} :{conf['type']};\n"
+      count += 1
+  str += "}"
+  print(str)
+
+'''
+function to append new keys to params.py
+'''
+def init_params_keys(keys, type):
+  for conf in confs:
+    if 'param' in conf['conf_type']:
+      keys[conf['name']] = type
+  return keys
+
+'''
+function to generate support car list
+'''
+def get_support_car_list():
+  attrs = ['FINGERPRINTS', 'FW_VERSIONS']
+  cars = dict()
+  for car_folder in [x[0] for x in os.walk('/data/openpilot/selfdrive/car')]:
+    try:
+      car_name = car_folder.split('/')[-1]
+      if car_name != "mock":
+        names = []
+        for attr in attrs:
+          values = __import__('selfdrive.car.%s.values' % car_name, fromlist=[attr])
+          if hasattr(values, attr):
+            attr_values = getattr(values, attr)
+          else:
+            continue
+
+          if isinstance(attr_values, dict):
+            for f, v in attr_values.items():
+              if f not in names:
+                names.append(f)
+          names.sort()
+        cars[car_name] = names
+    except (ImportError, IOError, ValueError):
+      pass
+  return json.dumps(cars)
+
+'''
+function to init param value.
+should add this into manager.py
+'''
+def init_params_vals(params, put_nonblocking):
+  for conf in confs:
+    if 'param' in conf['conf_type']:
+      if conf['name'] == 'dp_car_list':
+        put_nonblocking(conf['name'], get_support_car_list())
+      elif params.get(conf['name']) is None:
+        put_nonblocking(conf['name'], to_param_val(conf['name'], conf['default']))
+
+'''
+function to conditionally update params
+should add this after init_params_vals 
+'''
+def update_params_vals(params):
+  pass
+
+if __name__ == "__main__":
+  gen_log_struct()
@@ -44,7 +44,8 @@ class AutoMoveTempdir():
  def close(self):
    os.rename(self._path, self._target_path)

-  def __enter__(self): return self
+  def __enter__(self):
+    return self

  def __exit__(self, type, value, traceback):
    if type is None:
@@ -63,7 +64,8 @@ class NamedTemporaryDir():
  def close(self):
    shutil.rmtree(self._path)

-  def __enter__(self): return self
+  def __enter__(self):
+    return self

  def __exit__(self, type, value, traceback):
    self.close()
@@ -6,5 +6,4 @@ class FirstOrderFilter():

  def update(self, x):
    self.x = (1. - self.k) * self.x + self.k * x
-
-
+    return self.x
@@ -0,0 +1,12 @@
+import gettext
+from common import android
+
+is_android = android.ANDROID
+locale_dir = '/data/openpilot/selfdrive/assets/locales'
+supported_language = ['en-US', 'zh-TW', 'zh-CN']
+locale = android.getprop("persist.sys.locale") if is_android else 'en-US'
+
+def events():
+  i18n = gettext.translation('events', localedir=locale_dir, fallback=True, languages=[locale])
+  i18n.install()
+  return i18n.gettext
@@ -68,8 +68,11 @@ class SwagErrorFilter(logging.Filter):
  def filter(self, record):
    return record.levelno < logging.ERROR

-_tmpfunc = lambda: 0
-_srcfile = os.path.normcase(_tmpfunc.__code__.co_filename)
+def _tmpfunc():
+  return 0
+
+def _srcfile():
+  return os.path.normcase(_tmpfunc.__code__.co_filename)

 class SwagLogger(logging.Logger):
  def __init__(self):
@@ -0,0 +1,50 @@
+def cputime_total(ct):
+  return ct.cpuUser + ct.cpuSystem + ct.cpuChildrenUser + ct.cpuChildrenSystem
+
+
+def print_cpu_usage(first_proc, last_proc):
+  r = 0
+  procs = [
+      ("selfdrive.controls.controlsd", 59.46),
+      ("./_modeld", 6.75),
+      ("./loggerd", 28.49),
+      ("selfdrive.controls.plannerd", 19.77),
+      ("selfdrive.controls.radard", 9.54),
+      ("./_ui", 9.54),
+      ("./camerad", 7.07),
+      ("selfdrive.locationd.locationd", 27.46),
+      ("./_sensord", 6.17),
+      ("selfdrive.controls.dmonitoringd", 5.48),
+      ("./boardd", 3.63),
+      ("./_dmonitoringmodeld", 2.67),
+      ("selfdrive.logmessaged", 2.71),
+      ("selfdrive.thermald", 2.41),
+      ("./paramsd", 2.18),
+      ("selfdrive.locationd.calibrationd", 1.76),
+      ("./proclogd", 1.54),
+      ("./_gpsd", 0.09),
+      ("./clocksd", 0.02),
+      ("./ubloxd", 0.02),
+      ("selfdrive.tombstoned", 0),
+      ("./logcatd", 0),
+      ("selfdrive.updated", 0),
+  ]
+
+  dt = (last_proc.logMonoTime - first_proc.logMonoTime) / 1e9
+  print("------------------------------------------------")
+  for proc_name, normal_cpu_usage in procs:
+    try:
+      first = [p for p in first_proc.procLog.procs if proc_name in p.cmdline][0]
+      last = [p for p in last_proc.procLog.procs if proc_name in p.cmdline][0]
+      cpu_time = cputime_total(last) - cputime_total(first)
+      cpu_usage = cpu_time / dt * 100.
+      if cpu_usage > max(normal_cpu_usage * 1.1, normal_cpu_usage + 5.0):
+        print(f"Warning {proc_name} using more CPU than normal")
+        r = 1
+
+      print(f"{proc_name.ljust(35)}  {cpu_usage:.2f}%")
+    except IndexError:
+      print(f"{proc_name.ljust(35)}  NO METRICS FOUND")
+  print("------------------------------------------------")
+
+  return r
@@ -6,6 +6,7 @@ def clip(x, lo, hi):

 def interp(x, xp, fp):
  N = len(xp)
+
  def get_interp(xv):
    hi = 0
    while hi < N and xv > xp[hi]:
@@ -14,8 +15,8 @@ def interp(x, xp, fp):
    return fp[-1] if hi == N and xv > xp[low] else (
      fp[0] if hi == 0 else
      (xv - xp[low]) * (fp[hi] - fp[low]) / (xp[hi] - xp[low]) + fp[low])
-  return [get_interp(v) for v in x] if hasattr(
-    x, '__iter__') else get_interp(x)
+
+  return [get_interp(v) for v in x] if hasattr(x, '__iter__') else get_interp(x)

 def mean(x):
  return sum(x) / len(x)
@@ -23,13 +23,13 @@ file in place without messing with <params_dir>/d.
 import time
 import os
 import errno
-import sys
 import shutil
 import fcntl
 import tempfile
 import threading
 from enum import Enum
 from common.basedir import PARAMS
+from common.dp_conf import init_params_keys

 def mkdirs_exists_ok(path):
  try:
@@ -50,7 +50,7 @@ class UnknownKeyName(Exception):


 keys = {
-  "AccessToken": [TxType.PERSISTENT],
+  "AccessToken": [TxType.CLEAR_ON_MANAGER_START],
  "AthenadPid": [TxType.PERSISTENT],
  "CalibrationParams": [TxType.PERSISTENT],
  "CarParams": [TxType.CLEAR_ON_MANAGER_START, TxType.CLEAR_ON_PANDA_DISCONNECT],
@@ -59,6 +59,7 @@ keys = {
  "CommunityFeaturesToggle": [TxType.PERSISTENT],
  "CompletedTrainingVersion": [TxType.PERSISTENT],
  "ControlsParams": [TxType.PERSISTENT],
+  "DisablePowerDown": [TxType.PERSISTENT],
  "DoUninstall": [TxType.CLEAR_ON_MANAGER_START],
  "DongleId": [TxType.PERSISTENT],
  "GitBranch": [TxType.PERSISTENT],
@@ -67,6 +68,7 @@ keys = {
  "GithubSshKeys": [TxType.PERSISTENT],
  "HasAcceptedTerms": [TxType.PERSISTENT],
  "HasCompletedSetup": [TxType.PERSISTENT],
+  "IsDriverViewEnabled": [TxType.CLEAR_ON_MANAGER_START],
  "IsLdwEnabled": [TxType.PERSISTENT],
  "IsGeofenceEnabled": [TxType.PERSISTENT],
  "IsMetric": [TxType.PERSISTENT],
@@ -75,12 +77,14 @@ keys = {
  "IsTakingSnapshot": [TxType.CLEAR_ON_MANAGER_START],
  "IsUpdateAvailable": [TxType.CLEAR_ON_MANAGER_START],
  "IsUploadRawEnabled": [TxType.PERSISTENT],
+  "LastAthenaPingTime": [TxType.PERSISTENT],
  "LastUpdateTime": [TxType.PERSISTENT],
  "LimitSetSpeed": [TxType.PERSISTENT],
  "LimitSetSpeedNeural": [TxType.PERSISTENT],
  "LiveParameters": [TxType.PERSISTENT],
  "LongitudinalControl": [TxType.PERSISTENT],
  "OpenpilotEnabledToggle": [TxType.PERSISTENT],
+  "LaneChangeEnabled": [TxType.PERSISTENT],
  "PandaFirmware": [TxType.CLEAR_ON_MANAGER_START, TxType.CLEAR_ON_PANDA_DISCONNECT],
  "PandaFirmwareHex": [TxType.CLEAR_ON_MANAGER_START, TxType.CLEAR_ON_PANDA_DISCONNECT],
  "PandaDongleId": [TxType.CLEAR_ON_MANAGER_START, TxType.CLEAR_ON_PANDA_DISCONNECT],
@@ -93,6 +97,7 @@ keys = {
  "TermsVersion": [TxType.PERSISTENT],
  "TrainingVersion": [TxType.PERSISTENT],
  "UpdateAvailable": [TxType.CLEAR_ON_MANAGER_START],
+  "UpdateFailedCount": [TxType.CLEAR_ON_MANAGER_START],
  "Version": [TxType.PERSISTENT],
  "Offroad_ChargeDisabled": [TxType.CLEAR_ON_MANAGER_START, TxType.CLEAR_ON_PANDA_DISCONNECT],
  "Offroad_ConnectivityNeeded": [TxType.CLEAR_ON_MANAGER_START],
@@ -103,6 +108,7 @@ keys = {
  "Offroad_IsTakingSnapshot": [TxType.CLEAR_ON_MANAGER_START],
 }

+keys = init_params_keys(keys, [TxType.PERSISTENT])

 def fsync_dir(path):
  fd = os.open(path, os.O_RDONLY)
@@ -191,7 +197,8 @@ class DBReader(DBAccessor):
    finally:
      lock.release()

-  def __exit__(self, type, value, traceback): pass
+  def __exit__(self, type, value, traceback):
+    pass


 class DBWriter(DBAccessor):
@@ -394,22 +401,3 @@ def put_nonblocking(key, val):
  t = threading.Thread(target=f, args=(key, val))
  t.start()
  return t
-
-
-if __name__ == "__main__":
-  params = Params()
-  if len(sys.argv) > 2:
-    params.put(sys.argv[1], sys.argv[2])
-  else:
-    for k in keys:
-      pp = params.get(k)
-      if pp is None:
-        print("%s is None" % k)
-      elif all(ord(c) < 128 and ord(c) >= 32 for c in pp):
-        print("%s = %s" % (k, pp))
-      else:
-        print("%s = %s" % (k, pp.encode("hex")))
-
-  # Test multiprocess:
-  # seq 0 100000 | xargs -P20 -I{} python common/params.py DongleId {} && sleep 0.05
-  # while python common/params.py DongleId; do sleep 0.05; done
@@ -39,8 +39,7 @@ class Profiler():
    print("******* Profiling *******")
    for n, ms in sorted(self.cp.items(), key=lambda x: -x[1]):
      if n in self.cp_ignored:
-        print("%30s: %7.2f   percent: %3.0f   IGNORED" % (n, ms*1000.0, ms/self.tot*100))
+        print("%30s: %9.2f   percent: %3.0f   IGNORED" % (n, ms*1000.0, ms/self.tot*100))
      else:
-        print("%30s: %7.2f   percent: %3.0f" % (n, ms*1000.0, ms/self.tot*100))
+        print("%30s: %9.2f   percent: %3.0f" % (n, ms*1000.0, ms/self.tot*100))
    print("Iter clock: %2.6f   TOTAL: %2.2f" % (self.tot/self.iter, self.tot))
-
@@ -40,7 +40,7 @@ class Spinner():
    self.close()


-class FakeSpinner():
+class FakeSpinner(Spinner):
  def __init__(self):
    pass

@@ -50,6 +50,9 @@ class FakeSpinner():
  def update(self, _):
    pass

+  def close(self):
+    pass
+
  def __exit__(self, type, value, traceback):
    pass

@@ -32,7 +32,7 @@ class RunningStat():
      self.S_last = 0.
    else:
      self.M = self.M_last + (new_data - self.M_last) / self.n
-      self.S = self.S_last + (new_data - self.M_last) * (new_data - self.M);
+      self.S = self.S_last + (new_data - self.M_last) * (new_data - self.M)
      self.M_last = self.M
      self.S_last = self.S

@@ -53,7 +53,7 @@ class RunningStat():

 class RunningStatFilter():
  def __init__(self, raw_priors=None, filtered_priors=None, max_trackable=-1):
-    self.raw_stat = RunningStat(raw_priors, max_trackable)
+    self.raw_stat = RunningStat(raw_priors, -1)
    self.filtered_stat = RunningStat(filtered_priors, max_trackable)

  def reset(self):
@@ -64,7 +64,7 @@ class RunningStatFilter():
    _std_last = self.raw_stat.std()
    self.raw_stat.push_data(new_data)
    _delta_std = self.raw_stat.std() - _std_last
-    if _delta_std<=0:
+    if _delta_std <= 0:
      self.filtered_stat.push_data(new_data)
    else:
      pass
@@ -1,81 +0,0 @@
-#!/usr/bin/env python3
-import sympy as sp
-import numpy as np
-
-def cross(x):
-  ret = sp.Matrix(np.zeros((3,3)))
-  ret[0,1], ret[0,2] = -x[2], x[1]
-  ret[1,0], ret[1,2] = x[2], -x[0]
-  ret[2,0], ret[2,1] = -x[1], x[0]
-  return ret
-
-def euler_rotate(roll, pitch, yaw):
-  # make symbolic rotation matrix from eulers
-  matrix_roll =  sp.Matrix([[1, 0, 0],
-                            [0, sp.cos(roll), -sp.sin(roll)],
-                            [0, sp.sin(roll), sp.cos(roll)]])
-  matrix_pitch =  sp.Matrix([[sp.cos(pitch), 0, sp.sin(pitch)],
-                             [0, 1, 0],
-                             [-sp.sin(pitch), 0, sp.cos(pitch)]])
-  matrix_yaw =  sp.Matrix([[sp.cos(yaw), -sp.sin(yaw), 0],
-                           [sp.sin(yaw), sp.cos(yaw), 0],
-                           [0, 0, 1]])
-  return matrix_yaw*matrix_pitch*matrix_roll
-
-def quat_rotate(q0, q1, q2, q3):
-  # make symbolic rotation matrix from quat
-  return sp.Matrix([[q0**2 + q1**2 - q2**2 - q3**2, 2*(q1*q2 + q0*q3), 2*(q1*q3 - q0*q2)],
-                    [2*(q1*q2 - q0*q3), q0**2 - q1**2 + q2**2 - q3**2, 2*(q2*q3 + q0*q1)],
-                    [2*(q1*q3 + q0*q2), 2*(q2*q3 - q0*q1), q0**2 - q1**2 - q2**2 + q3**2]]).T
-
-def quat_matrix_l(p):
-  return sp.Matrix([[p[0], -p[1], -p[2], -p[3]],
-                    [p[1],  p[0], -p[3],  p[2]],
-                    [p[2],  p[3],  p[0], -p[1]],
-                    [p[3], -p[2],  p[1],  p[0]]])
-
-def quat_matrix_r(p):
-  return sp.Matrix([[p[0], -p[1], -p[2], -p[3]],
-                    [p[1],  p[0],  p[3], -p[2]],
-                    [p[2], -p[3],  p[0],  p[1]],
-                    [p[3],  p[2], -p[1],  p[0]]])
-
-
-def sympy_into_c(sympy_functions):
-  from sympy.utilities import codegen
-  routines = []
-  for name, expr, args in sympy_functions:
-    r = codegen.make_routine(name, expr, language="C99")
-
-    # argument ordering input to sympy is broken with function with output arguments
-    nargs = []
-    # reorder the input arguments
-    for aa in args:
-      if aa is None:
-        nargs.append(codegen.InputArgument(sp.Symbol('unused'), dimensions=[1,1]))
-        continue
-      found = False
-      for a in r.arguments:
-        if str(aa.name) == str(a.name):
-          nargs.append(a)
-          found = True
-          break
-      if not found:
-        # [1,1] is a hack for Matrices
-        nargs.append(codegen.InputArgument(aa, dimensions=[1,1]))
-    # add the output arguments
-    for a in r.arguments:
-      if type(a) == codegen.OutputArgument:
-        nargs.append(a)
-
-    #assert len(r.arguments) == len(args)+1
-    r.arguments = nargs
-
-    # add routine to list
-    routines.append(r)
-
-  [(c_name, c_code), (h_name, c_header)] = codegen.get_code_generator('C', 'ekf', 'C99').write(routines, "ekf")
-  c_code = '\n'.join(x for x in c_code.split("\n") if len(x) > 0 and x[0] != '#')
-  c_header = '\n'.join(x for x in  c_header.split("\n") if len(x) > 0 and x[0] != '#')
-
-  return c_header, c_code
@@ -6,4 +6,3 @@ def phone_only(x):
    return x
  else:
    return nottest(x)
-
@@ -0,0 +1,86 @@
+#!/usr/bin/env python3
+import os
+import time
+import subprocess
+from common.basedir import BASEDIR
+
+
+class TextWindow():
+  def __init__(self, s):
+    try:
+      self.text_proc = subprocess.Popen(["./text", s],
+                                        stdin=subprocess.PIPE,
+                                        cwd=os.path.join(BASEDIR, "selfdrive", "ui", "text"),
+                                        close_fds=True)
+    except OSError:
+      self.text_proc = None
+
+  def get_status(self):
+    if self.text_proc is not None:
+      self.text_proc.poll()
+      return self.text_proc.returncode
+
+    return None
+
+  def __enter__(self):
+    return self
+
+  def close(self):
+    if self.text_proc is not None:
+      self.text_proc.terminate()
+      self.text_proc = None
+
+  def wait_for_exit(self):
+    while True:
+      if self.get_status() == 1:
+        return
+      time.sleep(0.1)
+
+  def __del__(self):
+    self.close()
+
+  def __exit__(self, type, value, traceback):
+    self.close()
+
+
+class FakeTextWindow(TextWindow):
+  def __init__(self, s):
+    pass
+
+  def get_status(self):
+    return 1
+
+  def wait_for_exit(self):
+    return
+
+  def __enter__(self):
+    return self
+
+  def update(self, _):
+    pass
+
+  def close(self):
+    pass
+
+  def __exit__(self, type, value, traceback):
+    pass
+
+
+if __name__ == "__main__":
+  text = """Traceback (most recent call last):
+  File "./controlsd.py", line 608, in <module>
+    main()
+  File "./controlsd.py", line 604, in main
+    controlsd_thread(sm, pm, logcan)
+  File "./controlsd.py", line 455, in controlsd_thread
+    1/0
+ZeroDivisionError: division by zero"""
+  print(text)
+
+  with TextWindow(text) as s:
+    for _ in range(100):
+      if s.get_status() == 1:
+        print("Got exit button")
+        break
+      time.sleep(0.1)
+  print("gone")
@@ -25,4 +25,3 @@ class Timeout:

  def __exit__(self, exc_type, exc_val, exc_tb):
    signal.alarm(0)
-
@@ -1,6 +1,5 @@
 import numpy as np
 import common.transformations.orientation as orient
-import math

 FULL_FRAME_SIZE = (1164, 874)
 W, H = FULL_FRAME_SIZE[0], FULL_FRAME_SIZE[1]
@@ -60,7 +59,7 @@ def vp_from_ke(m):

  The vanishing point is defined as lim x->infinity C (x, 0, 0, 1).T
  """
-  return (m[0, 0]/m[2,0], m[1,0]/m[2,0])
+  return (m[0, 0]/m[2, 0], m[1, 0]/m[2, 0])


 def vp_from_rpy(rpy):
@@ -82,10 +81,10 @@ def normalize(img_pts, intrinsics=eon_intrinsics):
  img_pts = np.array(img_pts)
  input_shape = img_pts.shape
  img_pts = np.atleast_2d(img_pts)
-  img_pts = np.hstack((img_pts, np.ones((img_pts.shape[0],1))))
+  img_pts = np.hstack((img_pts, np.ones((img_pts.shape[0], 1))))
  img_pts_normalized = img_pts.dot(intrinsics_inv.T)
  img_pts_normalized[(img_pts < 0).any(axis=1)] = np.nan
-  return img_pts_normalized[:,:2].reshape(input_shape)
+  return img_pts_normalized[:, :2].reshape(input_shape)


 def denormalize(img_pts, intrinsics=eon_intrinsics):
@@ -94,13 +93,13 @@ def denormalize(img_pts, intrinsics=eon_intrinsics):
  img_pts = np.array(img_pts)
  input_shape = img_pts.shape
  img_pts = np.atleast_2d(img_pts)
-  img_pts = np.hstack((img_pts, np.ones((img_pts.shape[0],1))))
+  img_pts = np.hstack((img_pts, np.ones((img_pts.shape[0], 1))))
  img_pts_denormalized = img_pts.dot(intrinsics.T)
-  img_pts_denormalized[img_pts_denormalized[:,0] > W] = np.nan
-  img_pts_denormalized[img_pts_denormalized[:,0] < 0] = np.nan
-  img_pts_denormalized[img_pts_denormalized[:,1] > H] = np.nan
-  img_pts_denormalized[img_pts_denormalized[:,1] < 0] = np.nan
-  return img_pts_denormalized[:,:2].reshape(input_shape)
+  img_pts_denormalized[img_pts_denormalized[:, 0] > W] = np.nan
+  img_pts_denormalized[img_pts_denormalized[:, 0] < 0] = np.nan
+  img_pts_denormalized[img_pts_denormalized[:, 1] > H] = np.nan
+  img_pts_denormalized[img_pts_denormalized[:, 1] < 0] = np.nan
+  return img_pts_denormalized[:, :2].reshape(input_shape)


 def device_from_ecef(pos_ecef, orientation_ecef, pt_ecef):
@@ -125,10 +124,10 @@ def img_from_device(pt_device):
  pt_view = np.einsum('jk,ik->ij', view_frame_from_device_frame, pt_device)

  # This function should never return negative depths
-  pt_view[pt_view[:,2] < 0] = np.nan
+  pt_view[pt_view[:, 2] < 0] = np.nan

-  pt_img = pt_view/pt_view[:,2:3]
-  return pt_img.reshape(input_shape)[:,:2]
+  pt_img = pt_view/pt_view[:, 2:3]
+  return pt_img.reshape(input_shape)[:, :2]


 def get_camera_frame_from_calib_frame(camera_frame_from_road_frame):
@@ -146,82 +145,3 @@ def pretransform_from_calib(calib):
  camera_frame_from_road_frame = np.dot(eon_intrinsics, view_frame_from_road_frame)
  camera_frame_from_calib_frame = get_camera_frame_from_calib_frame(camera_frame_from_road_frame)
  return np.linalg.inv(camera_frame_from_calib_frame)
-
-
-def transform_img(base_img,
-                 augment_trans=np.array([0,0,0]),
-                 augment_eulers=np.array([0,0,0]),
-                 from_intr=eon_intrinsics,
-                 to_intr=eon_intrinsics,
-                 output_size=None,
-                 pretransform=None,
-                 top_hacks=False,
-                 yuv=False,
-                 alpha=1.0,
-                 beta=0,
-                 blur=0):
-  import cv2  # pylint: disable=import-error
-  cv2.setNumThreads(1)
-
-  if yuv:
-    base_img = cv2.cvtColor(base_img, cv2.COLOR_YUV2RGB_I420)
-
-  size = base_img.shape[:2]
-  if not output_size:
-    output_size = size[::-1]
-
-  cy = from_intr[1,2]
-  def get_M(h=1.22):
-    quadrangle = np.array([[0, cy + 20],
-                           [size[1]-1, cy + 20],
-                           [0, size[0]-1],
-                           [size[1]-1, size[0]-1]], dtype=np.float32)
-    quadrangle_norm = np.hstack((normalize(quadrangle, intrinsics=from_intr), np.ones((4,1))))
-    quadrangle_world = np.column_stack((h*quadrangle_norm[:,0]/quadrangle_norm[:,1],
-                                        h*np.ones(4),
-                                        h/quadrangle_norm[:,1]))
-    rot = orient.rot_from_euler(augment_eulers)
-    to_extrinsics = np.hstack((rot.T, -augment_trans[:,None]))
-    to_KE = to_intr.dot(to_extrinsics)
-    warped_quadrangle_full = np.einsum('jk,ik->ij', to_KE, np.hstack((quadrangle_world, np.ones((4,1)))))
-    warped_quadrangle = np.column_stack((warped_quadrangle_full[:,0]/warped_quadrangle_full[:,2],
-                                         warped_quadrangle_full[:,1]/warped_quadrangle_full[:,2])).astype(np.float32)
-    M = cv2.getPerspectiveTransform(quadrangle, warped_quadrangle.astype(np.float32))
-    return M
-
-  M = get_M()
-  if pretransform is not None:
-    M = M.dot(pretransform)
-  augmented_rgb = cv2.warpPerspective(base_img, M, output_size, borderMode=cv2.BORDER_REPLICATE)
-
-  if top_hacks:
-    cyy = int(math.ceil(to_intr[1,2]))
-    M = get_M(1000)
-    if pretransform is not None:
-      M = M.dot(pretransform)
-    augmented_rgb[:cyy] = cv2.warpPerspective(base_img, M, (output_size[0], cyy), borderMode=cv2.BORDER_REPLICATE)
-
-  # brightness and contrast augment
-  augmented_rgb = np.clip((float(alpha)*augmented_rgb + beta), 0, 255).astype(np.uint8)
-
-  # gaussian blur
-  if blur > 0:
-    augmented_rgb = cv2.GaussianBlur(augmented_rgb,(blur*2+1,blur*2+1),cv2.BORDER_DEFAULT)
-
-  if yuv:
-    augmented_img = cv2.cvtColor(augmented_rgb, cv2.COLOR_RGB2YUV_I420)
-  else:
-    augmented_img = augmented_rgb
-  return augmented_img
-
-
-def yuv_crop(frame, output_size, center=None):
-  # output_size in camera coordinates so u,v
-  # center in array coordinates so row, column
-  import cv2  # pylint: disable=import-error
-  rgb = cv2.cvtColor(frame, cv2.COLOR_YUV2RGB_I420)
-  if not center:
-    center = (rgb.shape[0]/2, rgb.shape[1]/2)
-  rgb_crop = rgb[center[0] - output_size[1]/2: center[0] + output_size[1]/2,
-                 center[1] - output_size[0]/2: center[1] + output_size[0]/2]
-  return cv2.cvtColor(rgb_crop, cv2.COLOR_RGB2YUV_I420)
@@ -18,9 +18,9 @@ def geodetic2ecef(geodetic, radians=False):
  geodetic = np.atleast_2d(geodetic)

  ratio = 1.0 if radians else (np.pi / 180.0)
-  lat = ratio*geodetic[:,0]
-  lon = ratio*geodetic[:,1]
-  alt = geodetic[:,2]
+  lat = ratio*geodetic[:, 0]
+  lon = ratio*geodetic[:, 1]
+  alt = geodetic[:, 2]

  xi = np.sqrt(1 - esq * np.sin(lat)**2)
  x = (a / xi + alt) * np.cos(lat) * np.cos(lon)
@@ -52,7 +52,7 @@ def ecef2geodetic(ecef, radians=False):
  S = np.cbrt(1 + C + np.sqrt(C * C + 2 * C))
  P = F / (3 * pow((S + 1 / S + 1), 2) * G * G)
  Q = np.sqrt(1 + 2 * esq * esq * P)
-  r_0 =  -(P * esq * r) / (1 + Q) + np.sqrt(0.5 * a * a*(1 + 1.0 / Q) - \
+  r_0 = -(P * esq * r) / (1 + Q) + np.sqrt(0.5 * a * a*(1 + 1.0 / Q) - \
        P * (1 - esq) * z * z / (Q * (1 + Q)) - 0.5 * P * r * r)
  U = np.sqrt(pow((r - esq * r_0), 2) + z * z)
  V = np.sqrt(pow((r - esq * r_0), 2) + (1 - esq) * z * z)
@@ -78,6 +78,8 @@ class LocalCoord():
                                     [-np.sin(lat)*np.sin(lon), np.cos(lon), -np.cos(lat)*np.sin(lon)],
                                     [np.cos(lat), 0, -np.sin(lat)]])
    self.ecef2ned_matrix = self.ned2ecef_matrix.T
+    self.ecef_from_ned_matrix = self.ned2ecef_matrix
+    self.ned_from_ecef_matrix = self.ecef2ned_matrix

  @classmethod
  def from_geodetic(cls, init_geodetic):
@@ -44,24 +44,15 @@ medmodel_intrinsics = np.array(

 # BIG model

-BIGMODEL_INPUT_SIZE = (864, 288)
+BIGMODEL_INPUT_SIZE = (1024, 512)
 BIGMODEL_YUV_SIZE = (BIGMODEL_INPUT_SIZE[0], BIGMODEL_INPUT_SIZE[1] * 3 // 2)

 bigmodel_zoom = 1.
 bigmodel_intrinsics = np.array(
  [[ eon_focal_length / bigmodel_zoom,    0. , 0.5 * BIGMODEL_INPUT_SIZE[0]],
-   [   0. ,  eon_focal_length / bigmodel_zoom,  0.2 * BIGMODEL_INPUT_SIZE[1]],
+   [   0. ,  eon_focal_length / bigmodel_zoom,  256+MEDMODEL_CY],
   [   0. ,                            0. ,   1.]])

-
-bigmodel_border = np.array([
-    [0,0,1],
-    [BIGMODEL_INPUT_SIZE[0], 0, 1],
-    [BIGMODEL_INPUT_SIZE[0], BIGMODEL_INPUT_SIZE[1], 1],
-    [0, BIGMODEL_INPUT_SIZE[1], 1],
-])
-
-
 model_frame_from_road_frame = np.dot(model_intrinsics,
  get_view_frame_from_road_frame(0, 0, 0, model_height))

@@ -72,6 +63,7 @@ medmodel_frame_from_road_frame = np.dot(medmodel_intrinsics,
  get_view_frame_from_road_frame(0, 0, 0, model_height))

 model_frame_from_bigmodel_frame = np.dot(model_intrinsics, np.linalg.inv(bigmodel_intrinsics))
+medmodel_frame_from_bigmodel_frame = np.dot(medmodel_intrinsics, np.linalg.inv(bigmodel_intrinsics))

 # 'camera from model camera'
 def get_model_height_transform(camera_frame_from_road_frame, height):
@@ -138,9 +130,9 @@ def get_camera_frame_from_bigmodel_frame(camera_frame_from_road_frame):

 def get_model_frame(snu_full, camera_frame_from_model_frame, size):
  idxs = camera_frame_from_model_frame.dot(np.column_stack([np.tile(np.arange(size[0]), size[1]),
-                                                            np.tile(np.arange(size[1]), (size[0],1)).T.flatten(),
+                                                            np.tile(np.arange(size[1]), (size[0], 1)).T.flatten(),
                                                            np.ones(size[0] * size[1])]).T).T.astype(int)
-  calib_flat = snu_full[idxs[:,1], idxs[:,0]]
+  calib_flat = snu_full[idxs[:, 1], idxs[:, 0]]
  if len(snu_full.shape) == 3:
    calib = calib_flat.reshape((size[1], size[0], 3))
  elif len(snu_full.shape) == 2:
@@ -13,11 +13,11 @@ Supports both x2y and y_from_x format (y_from_x preferred!).
 def euler2quat(eulers):
  eulers = array(eulers)
  if len(eulers.shape) > 1:
-    output_shape = (-1,4)
+    output_shape = (-1, 4)
  else:
    output_shape = (4,)
  eulers = np.atleast_2d(eulers)
-  gamma, theta, psi = eulers[:,0],  eulers[:,1],  eulers[:,2]
+  gamma, theta, psi = eulers[:, 0],  eulers[:, 1],  eulers[:, 2]

  q0 = np.cos(gamma / 2) * np.cos(theta / 2) * np.cos(psi / 2) + \
       np.sin(gamma / 2) * np.sin(theta / 2) * np.sin(psi / 2)
@@ -30,7 +30,7 @@ def euler2quat(eulers):

  quats = array([q0, q1, q2, q3]).T
  for i in range(len(quats)):
-    if quats[i,0] < 0:
+    if quats[i, 0] < 0:
      quats[i] = -quats[i]
  return quats.reshape(output_shape)

@@ -38,11 +38,11 @@ def euler2quat(eulers):
 def quat2euler(quats):
  quats = array(quats)
  if len(quats.shape) > 1:
-    output_shape = (-1,3)
+    output_shape = (-1, 3)
  else:
    output_shape = (3,)
  quats = np.atleast_2d(quats)
-  q0, q1, q2, q3 = quats[:,0], quats[:,1], quats[:,2], quats[:,3]
+  q0, q1, q2, q3 = quats[:, 0], quats[:, 1], quats[:, 2], quats[:, 3]

  gamma = np.arctan2(2 * (q0 * q1 + q2 * q3), 1 - 2 * (q1**2 + q2**2))
  theta = np.arcsin(2 * (q0 * q2 - q3 * q1))
@@ -101,7 +101,7 @@ def rot2quat(rots):
  q = np.empty((len(rots), 4))
  for i in range(len(rots)):
    _, eigvecs = linalg.eigh(K3[i].T)
-    eigvecs = eigvecs[:,3:]
+    eigvecs = eigvecs[:, 3:]
    q[i, 0] = eigvecs[-1]
    q[i, 1:] = -eigvecs[:-1].flatten()
    if q[i, 0] < 0:
@@ -124,8 +124,8 @@ def rot2euler(rots):
 quats_from_rotations = rot2quat
 quat_from_rot = rot2quat
 rotations_from_quats = quat2rot
-rot_from_quat= quat2rot
-rot_from_quat= quat2rot
+rot_from_quat = quat2rot
+rot_from_quat = quat2rot
 euler_from_rot = rot2euler
 euler_from_quat = quat2euler
 rot_from_euler = euler2rot
@@ -154,9 +154,9 @@ def rot_matrix(roll, pitch, yaw):
  cr, sr = np.cos(roll), np.sin(roll)
  cp, sp = np.cos(pitch), np.sin(pitch)
  cy, sy = np.cos(yaw), np.sin(yaw)
-  rr = array([[1,0,0],[0, cr,-sr],[0, sr, cr]])
-  rp = array([[cp,0,sp],[0, 1,0],[-sp, 0, cp]])
-  ry = array([[cy,-sy,0],[sy, cy,0],[0, 0, 1]])
+  rr = array([[1, 0, 0], [0, cr, -sr], [0, sr, cr]])
+  rp = array([[cp, 0, sp], [0, 1, 0], [-sp, 0, cp]])
+  ry = array([[cy, -sy, 0], [sy, cy, 0], [0, 0, 1]])
  return ry.dot(rp.dot(rr))


@@ -0,0 +1,45 @@
+import os
+from cffi import FFI
+
+# Workaround for the EON/termux build of Python having os.*xattr removed.
+ffi = FFI()
+ffi.cdef("""
+int setxattr(const char *path, const char *name, const void *value, size_t size, int flags);
+ssize_t getxattr(const char *path, const char *name, void *value, size_t size);
+ssize_t listxattr(const char *path, char *list, size_t size);
+int removexattr(const char *path, const char *name);
+""")
+libc = ffi.dlopen(None)
+
+def setxattr(path, name, value, flags=0):
+  path = path.encode()
+  name = name.encode()
+  if libc.setxattr(path, name, value, len(value), flags) == -1:
+    raise OSError(ffi.errno, f"{os.strerror(ffi.errno)}: setxattr({path}, {name}, {value}, {flags})")
+
+def getxattr(path, name, size=128):
+  path = path.encode()
+  name = name.encode()
+  value = ffi.new(f"char[{size}]")
+  l = libc.getxattr(path, name, value, size)
+  if l == -1:
+    # errno 61 means attribute hasn't been set
+    if ffi.errno == 61:
+      return None
+    raise OSError(ffi.errno, f"{os.strerror(ffi.errno)}: getxattr({path}, {name}, {size})")
+  return ffi.buffer(value)[:l]
+
+def listxattr(path, size=128):
+  path = path.encode()
+  attrs = ffi.new(f"char[{size}]")
+  l = libc.listxattr(path, attrs, size)
+  if l == -1:
+    raise OSError(ffi.errno, f"{os.strerror(ffi.errno)}: listxattr({path}, {size})")
+  # attrs is b'\0' delimited values (so chop off trailing empty item)
+  return [a.decode() for a in ffi.buffer(attrs)[:l].split(b"\0")[0:-1]]
+
+def removexattr(path, name):
+  path = path.encode()
+  name = name.encode()
+  if libc.removexattr(path, name) == -1:
+    raise OSError(ffi.errno, f"{os.strerror(ffi.errno)}: removexattr({path}, {name})")
@@ -0,0 +1,56 @@
+Make a python script translatable
+--
+1. add following codes to the top
+```python
+# This Python file uses the following encoding: utf-8
+# -*- coding: utf-8 -*-
+from common.i18n import events
+_ = events()
+``` 
+2. wrap ```_()``` function around the string.
+
+3. generate pot file (template file)
+```bash
+# e.g. xgettext -d base -o /data/openpilot/selfdrive/assets/locales/events.pot /data/openpilot/selfdrive/controls/lib/events.py
+xgettext -d base -o <openpilot_path>/selfdrive/assets/locales/<template_file>.pot <file_to_translate>.py
+```
+
+4. add po file to languages
+```bash
+# e.g. cp /data/openpilot/selfdrive/assets/locales/events.pot /data/openpilot/selfdrive/assets/locales/zh-TW/LC_MESSAGES/events.po
+cp <openpilot_path>/selfdrive/assets/locales/<template_file>.pot <openpilot_path>/selfdrive/assets/locales/<language>/LC_MESSAGES/<template_file>.po
+```
+
+5. translate po file with your favorite editor.
+
+6. generate mo file.
+```bash
+# e.g. msgfmt -o /data/openpilot/selfdrive/assets/locales/zh-TW/LC_MESSAGES/events.mo /data/openpilot/selfdrive/assets/locales/zh-TW/LC_MESSAGES/events
+msgfmt -o <openpilot_path>/selfdrive/assets/locales/<language>/LC_MESSAGES/<template_file>.mo <openpilot_path>/selfdrive/assets/locales/<language>/LC_MESSAGES/<template_file>
+```
+
+Update translations
+---
+1. add ```_()``` around the new strings
+
+2. generate pot file again (template file)
+```bash
+# e.g. xgettext -d base -o /data/openpilot/selfdrive/assets/locales/events.pot /data/openpilot/selfdrive/controls/lib/events.py
+xgettext -d base -o <openpilot_path>/selfdrive/assets/locales/<template_file>.pot <file_to_translate>.py
+```
+
+3. update already translated file (merge)
+```bash
+# e.g. msgmerge --update /data/openpilot/selfdrive/assets/locales/zh-TW/LC_MESSAGES/events.po /data/openpilot/selfdrive/assets/locales/events.pot
+msgmerge --update <openpilot_path>/selfdrive/assets/locales/<language>/LC_MESSAGES/<file_to_translate>.po <openpilot_path>/selfdrive/assets/locales/<template_file>.pot
+```
+
+4. generate mo file again.
+```bash
+# e.g. msgfmt -o /data/openpilot/selfdrive/assets/locales/zh-TW/LC_MESSAGES/events.mo /data/openpilot/selfdrive/assets/locales/zh-TW/LC_MESSAGES/events
+msgfmt -o <openpilot_path>/selfdrive/assets/locales/<language>/LC_MESSAGES/<template_file>.mo <openpilot_path>/selfdrive/assets/locales/<language>/LC_MESSAGES/<template_file>
+```
+
+Reference
+---
+https://simpleit.rocks/python/how-to-translate-a-python-project-with-gettext-the-easy-way/
@@ -0,0 +1,21 @@
+The MIT License
+
+Copyright (c) 2019-, Rick Lan, dragonpilot community, and a number of other of contributors.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
@@ -0,0 +1,92 @@
+This Font Software is licensed under the SIL Open Font License,
+Version 1.1.
+
+This license is copied below, and is also available with a FAQ at:
+http://scripts.sil.org/OFL
+
+-----------------------------------------------------------
+SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
+-----------------------------------------------------------
+
+PREAMBLE
+The goals of the Open Font License (OFL) are to stimulate worldwide
+development of collaborative font projects, to support the font
+creation efforts of academic and linguistic communities, and to
+provide a free and open framework in which fonts may be shared and
+improved in partnership with others.
+
+The OFL allows the licensed fonts to be used, studied, modified and
+redistributed freely as long as they are not sold by themselves. The
+fonts, including any derivative works, can be bundled, embedded,
+redistributed and/or sold with any software provided that any reserved
+names are not used by derivative works. The fonts and derivatives,
+however, cannot be released under any other type of license. The
+requirement for fonts to remain under this license does not apply to
+any document created using the fonts or their derivatives.
+
+DEFINITIONS
+"Font Software" refers to the set of files released by the Copyright
+Holder(s) under this license and clearly marked as such. This may
+include source files, build scripts and documentation.
+
+"Reserved Font Name" refers to any names specified as such after the
+copyright statement(s).
+
+"Original Version" refers to the collection of Font Software
+components as distributed by the Copyright Holder(s).
+
+"Modified Version" refers to any derivative made by adding to,
+deleting, or substituting -- in part or in whole -- any of the
+components of the Original Version, by changing formats or by porting
+the Font Software to a new environment.
+
+"Author" refers to any designer, engineer, programmer, technical
+writer or other person who contributed to the Font Software.
+
+PERMISSION & CONDITIONS
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of the Font Software, to use, study, copy, merge, embed,
+modify, redistribute, and sell modified and unmodified copies of the
+Font Software, subject to the following conditions:
+
+1) Neither the Font Software nor any of its individual components, in
+Original or Modified Versions, may be sold by itself.
+
+2) Original or Modified Versions of the Font Software may be bundled,
+redistributed and/or sold with any software, provided that each copy
+contains the above copyright notice and this license. These can be
+included either as stand-alone text files, human-readable headers or
+in the appropriate machine-readable metadata fields within text or
+binary files as long as those fields can be easily viewed by the user.
+
+3) No Modified Version of the Font Software may use the Reserved Font
+Name(s) unless explicit written permission is granted by the
+corresponding Copyright Holder. This restriction only applies to the
+primary font name as presented to the users.
+
+4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
+Software shall not be used to promote, endorse or advertise any
+Modified Version, except to acknowledge the contribution(s) of the
+Copyright Holder(s) and the Author(s) or with their explicit written
+permission.
+
+5) The Font Software, modified or unmodified, in part or in whole,
+must be distributed entirely under this license, and must not be
+distributed under any other license. The requirement for fonts to
+remain under this license does not apply to any document created using
+the Font Software.
+
+TERMINATION
+This license becomes null and void if any of the above conditions are
+not met.
+
+DISCLAIMER
+THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
+OTHER DEALINGS IN THE FONT SOFTWARE.
@@ -0,0 +1,372 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+    NOTE: this is the newer (L) version of the system font configuration,
+    supporting richer weight selection. Some apps will expect the older
+    version, so please keep system_fonts.xml and fallback_fonts.xml in sync
+    with any changes, even though framework will only read this file.
+
+    All fonts withohut names are added to the default list. Fonts are chosen
+    based on a match: full BCP-47 language tag including script, then just
+    language, and finally order (the first font containing the glyph).
+
+    Order of appearance is also the tiebreaker for weight matching. This is
+    the reason why the 900 weights of Roboto precede the 700 weights - we
+    prefer the former when an 800 weight is requested. Since bold spans
+    effectively add 300 to the weight, this ensures that 900 is the bold
+    paired with the 500 weight, ensuring adequate contrast.
+-->
+<familyset version="22">
+    <!-- first font is default -->
+    <family name="sans-serif">
+        <font weight="100" style="normal">Roboto-Thin.ttf</font>
+        <font weight="100" style="italic">Roboto-ThinItalic.ttf</font>
+        <font weight="300" style="normal">Roboto-Light.ttf</font>
+        <font weight="300" style="italic">Roboto-LightItalic.ttf</font>
+        <font weight="400" style="normal">Roboto-Regular.ttf</font>
+        <font weight="400" style="italic">Roboto-Italic.ttf</font>
+        <font weight="500" style="normal">Roboto-Medium.ttf</font>
+        <font weight="500" style="italic">Roboto-MediumItalic.ttf</font>
+        <font weight="900" style="normal">Roboto-Black.ttf</font>
+        <font weight="900" style="italic">Roboto-BlackItalic.ttf</font>
+        <font weight="700" style="normal">Roboto-Bold.ttf</font>
+        <font weight="700" style="italic">Roboto-BoldItalic.ttf</font>
+    </family>
+
+    <!-- Note that aliases must come after the fonts they reference. -->
+    <alias name="sans-serif-thin" to="sans-serif" weight="100" />
+    <alias name="sans-serif-light" to="sans-serif" weight="300" />
+    <alias name="sans-serif-medium" to="sans-serif" weight="500" />
+    <alias name="sans-serif-black" to="sans-serif" weight="900" />
+    <alias name="arial" to="sans-serif" />
+    <alias name="helvetica" to="sans-serif" />
+    <alias name="tahoma" to="sans-serif" />
+    <alias name="verdana" to="sans-serif" />
+
+    <family name="sans-serif-condensed">
+        <font weight="300" style="normal">RobotoCondensed-Light.ttf</font>
+        <font weight="300" style="italic">RobotoCondensed-LightItalic.ttf</font>
+        <font weight="400" style="normal">RobotoCondensed-Regular.ttf</font>
+        <font weight="400" style="italic">RobotoCondensed-Italic.ttf</font>
+        <font weight="700" style="normal">RobotoCondensed-Bold.ttf</font>
+        <font weight="700" style="italic">RobotoCondensed-BoldItalic.ttf</font>
+    </family>
+    <alias name="sans-serif-condensed-light" to="sans-serif-condensed" weight="300" />
+
+    <family name="serif">
+        <font weight="400" style="normal">NotoSerif-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSerif-Bold.ttf</font>
+        <font weight="400" style="italic">NotoSerif-Italic.ttf</font>
+        <font weight="700" style="italic">NotoSerif-BoldItalic.ttf</font>
+    </family>
+    <alias name="times" to="serif" />
+    <alias name="times new roman" to="serif" />
+    <alias name="palatino" to="serif" />
+    <alias name="georgia" to="serif" />
+    <alias name="baskerville" to="serif" />
+    <alias name="goudy" to="serif" />
+    <alias name="fantasy" to="serif" />
+    <alias name="ITC Stone Serif" to="serif" />
+
+    <family name="monospace">
+        <font weight="400" style="normal">DroidSansMono.ttf</font>
+    </family>
+    <alias name="sans-serif-monospace" to="monospace" />
+    <alias name="monaco" to="monospace" />
+
+    <family name="serif-monospace">
+        <font weight="400" style="normal">CutiveMono.ttf</font>
+    </family>
+    <alias name="courier" to="serif-monospace" />
+    <alias name="courier new" to="serif-monospace" />
+
+    <family name="casual">
+        <font weight="400" style="normal">ComingSoon.ttf</font>
+    </family>
+
+    <family name="cursive">
+        <font weight="400" style="normal">DancingScript-Regular.ttf</font>
+        <font weight="700" style="normal">DancingScript-Bold.ttf</font>
+    </family>
+
+    <family name="sans-serif-smallcaps">
+        <font weight="400" style="normal">CarroisGothicSC-Regular.ttf</font>
+    </family>
+
+    <!-- fallback fonts -->
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoNaskhArabic-Regular.ttf</font>
+        <font weight="700" style="normal">NotoNaskhArabic-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoNaskhArabicUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoNaskhArabicUI-Bold.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansEthiopic-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansEthiopic-Bold.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansHebrew-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansHebrew-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansThai-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansThai-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansThaiUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansThaiUI-Bold.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansArmenian-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansArmenian-Bold.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansGeorgian-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansGeorgian-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansDevanagari-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansDevanagari-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansDevanagariUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansDevanagariUI-Bold.ttf</font>
+    </family>
+    <!-- Gujarati should come after Devanagari -->
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansGujarati-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansGujarati-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansGujaratiUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansGujaratiUI-Bold.ttf</font>
+    </family>
+    <!-- Gurmukhi should come after Devanagari -->
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansGurmukhi-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansGurmukhi-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansGurmukhiUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansGurmukhiUI-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansTamil-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansTamil-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansTamilUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansTamilUI-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansMalayalam-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansMalayalam-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansMalayalamUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansMalayalamUI-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansBengali-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansBengali-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansBengaliUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansBengaliUI-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansTelugu-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansTelugu-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansTeluguUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansTeluguUI-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansKannada-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansKannada-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansKannadaUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansKannadaUI-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansOriya-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansOriya-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansOriyaUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansOriyaUI-Bold.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansSinhala-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansSinhala-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansKhmer-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansKhmer-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansKhmerUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansKhmerUI-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansLao-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansLao-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansLaoUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansLaoUI-Bold.ttf</font>
+    </family>
+    <family variant="elegant">
+        <font weight="400" style="normal">NotoSansMyanmar-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansMyanmar-Bold.ttf</font>
+    </family>
+    <family variant="compact">
+        <font weight="400" style="normal">NotoSansMyanmarUI-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansMyanmarUI-Bold.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansThaana-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansThaana-Bold.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansCham-Regular.ttf</font>
+        <font weight="700" style="normal">NotoSansCham-Bold.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansBalinese-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansBamum-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansBatak-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansBuginese-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansBuhid-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansCanadianAboriginal-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansCherokee-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansCoptic-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansGlagolitic-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansHanunoo-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansJavanese-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansKayahLi-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansLepcha-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansLimbu-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansLisu-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansMandaic-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansMeeteiMayek-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansNewTaiLue-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansNKo-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansOlChiki-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansRejang-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansSaurashtra-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansSundanese-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansSylotiNagri-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansSyriacEstrangela-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansTagbanwa-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansTaiTham-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansTaiViet-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansTibetan-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansTifinagh-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansVai-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansYi-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansSymbols-Regular-Subsetted.ttf</font>
+    </family>
+    <family lang="ja">
+        <font weight="400" style="normal">NotoSansJP-Regular.otf</font>
+    </family>
+    <family lang="ko">
+        <font weight="400" style="normal">NotoSansKR-Regular.otf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NanumGothic.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoColorEmoji.ttf</font>
+    </family>
+    <family lang="zh-Hans">
+        <font weight="400" style="normal">NotoSansCJKtc-Regular.otf</font>
+        <font weight="500" style="normal">NotoSansCJKtc-Medium.otf</font>
+        <font weight="700" style="normal">NotoSansCJKtc-Bold.otf</font>
+    </family>
+    <family lang="zh-Hant">
+        <font weight="400" style="normal">NotoSansCJKtc-Regular.otf</font>
+        <font weight="500" style="normal">NotoSansCJKtc-Medium.otf</font>
+        <font weight="700" style="normal">NotoSansCJKtc-Bold.otf</font>
+    </family>
+    <family lang="ja">
+        <font weight="400" style="normal">MTLmr3m.ttf</font>
+    </family>
+    <!--
+        Tai Le and Mongolian are intentionally kept last, to make sure they don't override
+        the East Asian punctuation for Chinese.
+    -->
+    <family>
+        <font weight="400" style="normal">NotoSansTaiLe-Regular.ttf</font>
+    </family>
+    <family>
+        <font weight="400" style="normal">NotoSansMongolian-Regular.ttf</font>
+    </family>
+</familyset>
@@ -0,0 +1,62 @@
+#!/usr/bin/bash
+
+###############################################################################
+# The MIT License
+#
+# Copyright (c) 2019-, Rick Lan, dragonpilot community, and a number of other of contributors.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+# Noto is a trademark of Google Inc. Noto fonts are open source.
+# All Noto fonts are published under the SIL Open Font License,
+# Version 1.1. Language data and some sample texts are from the Unicode CLDR project.
+#
+###############################################################################
+
+
+# Android system locale, zh-TW = Traditional Chinese, zh-CN = Simplified Chinese
+#lang=en
+
+update_font=0
+remove_old_font=0
+
+# check regular font
+if [ ! -f "/system/fonts/NotoSansCJKtc-Regular.otf" ]; then
+    update_font=1
+fi
+
+if [ $update_font -eq "1" ] || [ $remove_old_font -eq "1" ]; then
+    # sleep 3 secs in case, make sure the /system is re-mountable
+    sleep 3
+    mount -o remount,rw /system
+    if [ $update_font -eq "1" ]; then
+        # install font
+        cp -rf /data/openpilot/dragonpilot/cjk-fonts/NotoSansCJKtc-* /system/fonts/
+        # install font mapping
+        cp -rf /data/openpilot/dragonpilot/cjk-fonts/fonts.xml /system/etc/fonts.xml
+        # change permissions
+        chmod 644 /system/etc/fonts.xml
+        chmod 644 /system/fonts/NotoSansCJKtc-*
+    fi
+    mount -o remount,r /system
+    # change system locale
+fi
+
+#setprop persist.sys.locale $lang
+#setprop persist.sys.local $lang
@@ -1,7 +1,7 @@
 {
-  "ota_url": "https://commadist.azureedge.net/neosupdate/ota-signed-efdf7de63b1aef63d68301e6175930991bf9a5927d16ec6fcc69287e2ee7ca4a.zip",
-  "ota_hash": "efdf7de63b1aef63d68301e6175930991bf9a5927d16ec6fcc69287e2ee7ca4a",
-  "recovery_url": "https://commadist.azureedge.net/neosupdate/recovery-97c27e6ed04ed6bb0608b845a2d4100912093f9380c3f2ba6b56bccd608e5f6e.img",
-  "recovery_len": 15861036,
-  "recovery_hash": "97c27e6ed04ed6bb0608b845a2d4100912093f9380c3f2ba6b56bccd608e5f6e"
+  "ota_url": "http://dpp.cool/neosupdate/ota-signed-9718ecea1c6728a59d133605f79e90934727f5b4915aab75ee0b5a52c3007565.zip",
+  "ota_hash": "9718ecea1c6728a59d133605f79e90934727f5b4915aab75ee0b5a52c3007565",
+  "recovery_url": "http://dpp.cool/neosupdate/recovery-4772f9348e04b560b9df87d6dea6c740fa8d62ea41a8db3842eec216f04e3110.img",
+  "recovery_len": 15922476,
+  "recovery_hash": "4772f9348e04b560b9df87d6dea6c740fa8d62ea41a8db3842eec216f04e3110"
 }
@@ -0,0 +1,7 @@
+{
+  "ota_url": "https://commadist.azureedge.net/neosupdate/ota-signed-3bd2b3bdd6a501569e00b8f12786d65e0fd2788c0dd238f8c986e3e2e504683a-kernel.zip",
+  "ota_hash": "3bd2b3bdd6a501569e00b8f12786d65e0fd2788c0dd238f8c986e3e2e504683a",
+  "recovery_url": "https://commadist.azureedge.net/neosupdate/recovery-97c27e6ed04ed6bb0608b845a2d4100912093f9380c3f2ba6b56bccd608e5f6e.img",
+  "recovery_len": 15861036,
+  "recovery_hash": "97c27e6ed04ed6bb0608b845a2d4100912093f9380c3f2ba6b56bccd608e5f6e"
+}
@@ -30,10 +30,10 @@ function launch {
  #    that completed successfully and synced to disk.

  if [ -f "${BASEDIR}/.overlay_init" ]; then
-    find ${BASEDIR}/.git -newer ${BASEDIR}/.overlay_init | grep -q '.' 2> /dev/null
-    if [ $? -eq 0 ]; then
-      echo "${BASEDIR} has been modified, skipping overlay update installation"
-    else
+#    find ${BASEDIR}/.git -newer ${BASEDIR}/.overlay_init | grep -q '.' 2> /dev/null
+#    if [ $? -eq 0 ]; then
+#      echo "${BASEDIR} has been modified, skipping overlay update installation"
+#    else
      if [ -f "${STAGING_ROOT}/finalized/.overlay_consistent" ]; then
        if [ ! -d /data/safe_staging/old_openpilot ]; then
          echo "Valid overlay update found, installing"
@@ -52,7 +52,7 @@ function launch {
          # TODO: restore backup? This means the updater didn't start after swapping
        fi
      fi
-    fi
+#    fi
  fi

  # no cpu rationing for now
@@ -62,6 +62,12 @@ function launch {
  echo 0-3 > /dev/cpuset/foreground/cpus
  echo 0-3 > /dev/cpuset/android/cpus

+  # change interrupt affinity
+  echo 3 > /proc/irq/6/smp_affinity_list # MDSS
+  echo 1 > /proc/irq/78/smp_affinity_list # Modem, can potentially lock up
+  echo 2 > /proc/irq/733/smp_affinity_list # USB
+  echo 2 > /proc/irq/736/smp_affinity_list # USB
+
  DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null && pwd )"

  # Remove old NEOS update file
@@ -77,6 +83,10 @@ function launch {
    fi

    "$DIR/installer/updater/updater" "file://$DIR/installer/updater/update.json"
+  else
+      if [[ $(uname -v) == "#1 SMP PREEMPT Wed Jun 10 12:40:53 PDT 2020" ]]; then
+          "$DIR/installer/updater/updater" "file://$DIR/installer/updater/update_kernel.json"
+      fi
  fi


@@ -84,6 +94,10 @@ function launch {
  ln -sfn $(pwd) /data/pythonpath
  export PYTHONPATH="$PWD"

+  if [ -f "/sdcard/dp_patcher.py" ]; then
+    /data/data/com.termux/files/usr/bin/python /sdcard/dp_patcher.py
+  fi
+
  # start manager
  cd selfdrive
  ./manager.py
@@ -1,5 +1,5 @@
 #!/usr/bin/bash
-
+/usr/bin/sh /data/openpilot/dragonpilot/cjk-fonts/installer.sh &
 export PASSIVE="0"
 exec ./launch_chffrplus.sh

@@ -0,0 +1,17 @@
+path_classifiers:
+  library:
+    - external
+    - phonelibs
+    - pyextra
+    - tools/lib/mkvparse
+extraction:
+  cpp:
+    after_prepare:
+      - "pip3 install jinja2 pyyaml cython pycapnp numpy sympy tqdm cffi logentries zmq"
+      - "export PATH=$PWD/external/bin:$PATH"
+    index:
+      build_command: "python3 $(which scons)"
+  javascript:
+    index:
+      filters:
+      - exclude: "*"
@@ -0,0 +1,27 @@
+name: Tests
+
+on: [push, pull_request]
+
+jobs:
+  test:
+    runs-on: ubuntu-16.04
+
+    steps:
+      - uses: actions/checkout@v2
+      - run: |
+          set -e
+          docker build -t opendbc .
+        name: "Build"
+      - name: Static analysis
+        run: |
+          docker run opendbc bash -c "cd opendbc && git init && git add -A && pre-commit run --all"
+      - run: |
+          docker run opendbc bash -c "python -m unittest discover opendbc"
+        name: "Unit tests"
+      - run: |
+          docker run opendbc bash -c "cd opendbc/can/tests/linter_python; PYTHONPATH=/ ./flake8_opendbc.sh"
+          docker run opendbc bash -c "cd opendbc/can/tests/linter_python; PYTHONPATH=/ ./pylint_opendbc.sh"
+        name: "Python linter"
+      - run: |
+          docker run opendbc bash -c "cd opendbc/can/tests/; PYTHONPATH=/ ./test_generator.sh"
+        name: "Generator test"
@@ -1,3 +1,4 @@
+.mypy_cache/
 *.pyc
 *.os
 *.tmp
@@ -0,0 +1,27 @@
+repos:
+-   repo: https://github.com/pre-commit/pre-commit-hooks
+    rev: master
+    hooks:
+    -   id: check-ast
+    -   id: check-json
+    -   id: check-xml
+    -   id: check-yaml
+-   repo: https://github.com/pre-commit/mirrors-mypy
+    rev: master
+    hooks:
+    -   id: mypy
+-   repo: https://github.com/PyCQA/flake8
+    rev: master
+    hooks:
+    -   id: flake8
+        args:
+        - --select=F
+-   repo: local
+    hooks:
+    -   id: pylint
+        name: pylint
+        entry: pylint
+        language: system
+        types: [python]
+        args:
+        - --disable=R,C,W
@@ -1,6 +1,6 @@
 from ubuntu:16.04

-RUN apt-get update && apt-get install -y libzmq3-dev clang wget git autoconf libtool curl make build-essential libssl-dev zlib1g-dev libbz2-dev libreadline-dev libsqlite3-dev llvm libncurses5-dev libncursesw5-dev xz-utils tk-dev libffi-dev liblzma-dev python-openssl
+RUN apt-get update && apt-get install -y libzmq3-dev capnproto libcapnp-dev clang wget git autoconf libtool curl make build-essential libssl-dev zlib1g-dev libbz2-dev libreadline-dev libsqlite3-dev llvm libncurses5-dev libncursesw5-dev xz-utils tk-dev libffi-dev liblzma-dev python-openssl

 RUN curl -L https://github.com/pyenv/pyenv-installer/raw/master/bin/pyenv-installer | bash
 ENV PATH="/root/.pyenv/bin:/root/.pyenv/shims:${PATH}"
@@ -10,16 +10,16 @@ RUN pyenv rehash

 COPY requirements.txt /tmp/
 RUN pip install -r /tmp/requirements.txt
+RUN pip install pre-commit==2.4.0 pylint==2.5.2

 ENV PYTHONPATH=/project

+WORKDIR /project
 # TODO: Add tag to cereal
 RUN git clone https://github.com/commaai/cereal.git /project/cereal
-RUN /project/cereal/install_capnp.sh
-
-WORKDIR /project

 COPY SConstruct .
 COPY . /project/opendbc

+RUN rm -rf /project/opendbc/.git
 RUN scons -c && scons -j$(nproc)
@@ -1,19 +0,0 @@
-pr: none
-
-pool:
-  vmImage: 'ubuntu-16.04'
-steps:
- script: |
-    set -e
-    docker build -t opendbc .
-  displayName: 'Build'
- script: |
-    docker run opendbc bash -c "python -m unittest discover opendbc"
-  displayName: 'Unit tests'
- script: |
-    docker run opendbc bash -c "cd opendbc/can/tests/linter_python; PYTHONPATH=/ ./flake8_opendbc.sh"
-    docker run opendbc bash -c "cd opendbc/can/tests/linter_python; PYTHONPATH=/ ./pylint_opendbc.sh"
-  displayName: 'Python linter'
- script: |
-    docker run opendbc bash -c "cd opendbc/can/tests/; PYTHONPATH=/ ./test_generator.sh"
-  displayName: 'Generator test'
@@ -0,0 +1,291 @@
+VERSION ""
+
+
+NS_ :
+    NS_DESC_
+    CM_
+    BA_DEF_
+    BA_
+    VAL_
+    CAT_DEF_
+    CAT_
+    FILTER
+    BA_DEF_DEF_
+    EV_DATA_
+    ENVVAR_DATA_
+    SGTYPE_
+    SGTYPE_VAL_
+    BA_DEF_SGTYPE_
+    BA_SGTYPE_
+    SIG_TYPE_REF_
+    VAL_TABLE_
+    SIG_GROUP_
+    SIG_VALTYPE_
+    SIGTYPE_VALTYPE_
+    BO_TX_BU_
+    BA_DEF_REL_
+    BA_REL_
+    BA_DEF_DEF_REL_
+    BU_SG_REL_
+    BU_EV_REL_
+    BU_BO_REL_
+    SG_MUL_VAL_
+
+BS_:
+
+BU_: XXX EON Vector__XXX
+
+
+BO_ 170 AccPedal: 8 XXX
+ SG_ KickDownPressed : 53|1@0+ (1,0) [0|3] "" XXX
+ SG_ CruisePedalActive : 54|1@0+ (1,0) [0|1] "" XXX
+ SG_ CruisePedalInactive : 55|1@0+ (1,0) [0|1] "" XXX
+ SG_ ThrottlelPressed : 50|1@0+ (1,0) [0|1] "" XXX
+ SG_ AcceleratorPedalPressed : 52|1@0+ (1,0) [0|7] "" XXX
+ SG_ AcceleratorPedalPercentage : 16|16@1+ (0.01,0) [0|100] "" XXX
+ SG_ Counter1 : 8|4@1+ (1,0) [0|15] "" XXX
+ SG_ EngineSpeed : 32|16@1- (1,0) [0|65535] "" XXX
+ SG_ uknown : 7|8@0- (1,0) [0|65535] "" XXX
+
+BO_ 404 CruiseControl: 4 XXX
+ SG_ plus1mph_request : 16|1@0+ (1,0) [0|1] "" XXX
+ SG_ minus1mph_request : 18|1@0+ (1,0) [0|1] "" XXX
+ SG_ Cancel_request_up_stalk : 23|1@0+ (1,0) [0|1] "" XXX
+ SG_ Cancel_request_up_or_down_stalk : 20|1@0+ (1,0) [0|1] "" XXX
+ SG_ Resume_request : 22|1@0+ (1,0) [0|1] "" XXX
+ SG_ Counter1 : 3|4@0+ (1,0) [0|15] "" XXX
+ SG_ Counter2 : 11|4@0+ (1,0) [0|15] "" XXX
+ SG_ notCancel_0xF : 7|4@0+ (1,0) [0|15] "" XXX
+ SG_ setMe_0xFC : 31|8@0+ (1,0) [0|255] "" XXX
+ SG_ requests_0xF : 15|4@0+ (1,0) [0|15] "" XXX
+ SG_ plus5mph_request : 17|1@0+ (1,0) [0|0] "" Vector__XXX
+ SG_ minus5mph_request : 19|1@0+ (1,0) [0|0] "" Vector__XXX
+
+BO_ 512 CruiseControlStatus: 8 XXX
+ SG_ CruiseControlInactiveFlag : 12|1@0+ (1,0) [0|1] "" XXX
+ SG_ CruiseCoontrolActiveFlag : 13|1@0+ (1,0) [0|1] "" XXX
+ SG_ CruiseControlSetpointSpeed : 7|8@0+ (0.25,0) [0|255] "mph" XXX
+
+BO_ 168 EngineAndBrake: 8 XXX
+ SG_ Brake_active2 : 62|1@0+ (1,0) [0|1] "" XXX
+ SG_ BrakePressed : 61|1@0+ (1,0) [0|1] "" XXX
+ SG_ EngineTorque : 8|16@1- (1,0) [0|65535] "" XXX
+ SG_ EngineTorqueWoInterv : 24|16@1- (1,0) [0|65535] "" XXX
+
+BO_ 470 SteeringButtons: 2 XXX
+ SG_ Volume_DOWN : 2|1@0+ (1,0) [0|1] "" XXX
+ SG_ Volume_UP : 3|1@0+ (1,0) [0|1] "" XXX
+ SG_ VoiceControl : 8|1@0+ (1,0) [0|1] "" XXX
+ SG_ Telephone : 0|1@0+ (1,0) [0|1] "" XXX
+ SG_ Next_up : 5|1@0+ (1,0) [0|1] "" XXX
+ SG_ Previous_down : 4|1@0+ (1,0) [0|1] "" XXX
+
+BO_ 403 DynamicCruiseControlStatus: 8 XXX
+ SG_ Counter : 7|8@0+ (1,0) [0|255] "" XXX
+ SG_ CruiseActive : 43|1@0+ (1,0) [0|1] "" XXX
+ SG_ CruiseSpeedChangeRequest : 48|1@0+ (1,0) [0|1] "" XXX
+ SG_ CruiseControlSetpointSpeed : 15|8@0+ (1,-2) [0|255] "mph" XXX
+
+BO_ 201 SteeringWheelAngle_DSC: 8 XXX
+ SG_ Counter1 : 23|4@0+ (1,0) [0|15] "" XXX
+ SG_ WeirdCounter : 44|4@1+ (1,0) [0|3] "" XXX
+ SG_ SteeringPositionComplementLow : 24|11@1- (1,0) [0|1] "" XXX
+ SG_ SteeringPosition : 0|16@1- (0.0439453125,0) [-600|600] "deg" XXX
+
+BO_ 206 WheelSpeeds: 8 XXX
+ SG_ Wheel1 : 0|16@1- (0.0643699,0) [0|255] "kph" XXX
+ SG_ Wheel2 : 16|16@1- (0.0643699,0) [0|255] "kph" XXX
+ SG_ Wheel4 : 48|16@1- (0.0643699,0) [0|255] "kph" XXX
+ SG_ Wheel3 : 32|16@1- (0.0643699,0) [0|255] "kph" XXX
+
+BO_ 884 WheelToleranceAdjustment: 8 XXX
+
+BO_ 678 WiperSwitch: 8 XXX
+ SG_ AutoWipersOn : 0|1@1+ (1,0) [0|3] "" XXX
+
+BO_ 304 TerminalStatus: 8 XXX
+ SG_ AccOn : 23|1@0+ (1,0) [0|255] "" XXX
+ SG_ IgnitionOff : 22|1@0+ (1,0) [0|3] "" XXX
+
+BO_ 169 Torque2: 8 XXX
+
+BO_ 184 TorqueTransmisionRequest: 8 XXX
+
+BO_ 196 SteeringWheelAngle: 7 XXX
+ SG_ SteeringPosition : 0|16@1- (0.0439453125,0) [-600|600] "degree" XXX
+ SG_ SteeringSpeed : 24|16@1- (0.0439453125,0) [0|255] "degree/s" XXX
+
+BO_ 180 WheelTorqueDriveTrain1: 8 XXX
+
+BO_ 182 DynamicCruiseControlTorqueDemand: 8 XXX
+
+BO_ 186 TransmissionData: 8 XXX
+
+BO_ 191 RequestedWheelTorqueDriveTrainActiveCruiseControl: 8 XXX
+ SG_ Counter : 11|4@0- (1,0) [0|255] "" XXX
+ SG_ TorqueReq : 16|11@1+ (1,0) [0|65535] "" XXX
+
+BO_ 414 Status_DSC: 8 XXX
+
+BO_ 416 Speed: 8 XXX
+ SG_ VehicleSpeed : 0|12@1+ (0.103,0) [0|255] "kph" XXX
+
+BO_ 418 TransimissionData2: 8 XXX
+
+BO_ 690 WheelPressure: 8 XXX
+
+BO_ 691 AccelerationData: 8 XXX
+
+BO_ 408 GearSelectorSwitch: 8 XXX
+ SG_ Gear : 0|8@1+ (1,0) [0|0] "" Vector__XXX
+
+BO_ 422 Distance: 8 XXX
+
+BO_ 436 InstrumentClusterStatus_KOMBI: 8 XXX
+
+BO_ 464 EngineData: 8 XXX
+
+BO_ 945 TransmissionData3: 8 XXX
+
+BO_ 200 SteeringWheelAngle_slow: 8 XXX
+ SG_ SteeringPosition : 0|16@1- (0.0439453125,0) [-600|600] "degree" XXX
+ SG_ SteeringSpeed : 24|16@1- (0.0439453125,0) [-65535|65535] "degree/s" XXX
+
+BO_ 466 TransmissionDataDisplay: 8 XXX
+
+BO_ 437 HeatFlow_LoadMomentClimate: 8 XXX
+
+BO_ 1152 NetworkManagment1: 8 XXX
+
+BO_ 1170 NetworkManagment2: 8 XXX
+
+BO_ 1175 NetworkManagment3: 8 XXX
+
+BO_ 1176 NetworkManagment4: 8 XXX
+
+BO_ 1193 NetworkManagment5: 8 XXX
+
+BO_ 1246 NetworkManagment6: 8 XXX
+
+BO_ 438 HeatFlowEngine: 8 XXX
+
+BO_ 784 AmbientTemperature: 8 XXX
+
+BO_ 821 ElectricFuelPumpStatus: 8 XXX
+
+BO_ 1007 EngineOBD_data: 8 XXX
+
+BO_ 1432 ServicesDKG: 8 XXX
+
+BO_ 309 CrashDisconnectControl: 8 XXX
+
+BO_ 502 TurnSignals: 2 XXX
+ SG_ TurnSignalIdle : 9|1@0+ (1,0) [0|1] "" XXX
+ SG_ TurnSignalActive : 8|1@0+ (1,0) [0|1] "" XXX
+ SG_ RightTurn : 5|1@0+ (1,0) [0|1] "" XXX
+ SG_ LeftTurn : 4|1@1+ (1,0) [0|1] "" XXX
+ SG_ HoldActivated : 0|1@1+ (1,0) [0|1] "" XXX
+
+BO_ 514 Dimming: 8 XXX
+
+BO_ 538 LampsCondition: 8 XXX
+
+BO_ 550 RainSensorWiperSpeed: 8 XXX
+
+BO_ 578 ClimateFrontStatus: 8 XXX
+
+BO_ 704 LCD_lighting: 8 XXX
+
+BO_ 758 LightControl: 8 XXX
+
+BO_ 760 Time_Date: 8 XXX
+
+BO_ 762 SeatBeltContact: 8 XXX
+
+BO_ 764 TrunkStatus: 8 XXX
+
+BO_ 797 TirePressureStatus: 8 XXX
+
+BO_ 816 Range_Mileage: 8 XXX
+
+BO_ 823 StatusFuelControl: 8 XXX
+
+BO_ 897 EngineOilLevelStatus: 8 XXX
+
+BO_ 940 Terminal30Eerror: 8 XXX
+
+BO_ 947 PowerManagmentConsumptionControl: 8 XXX
+
+BO_ 948 PowerBatteryVoltage: 8 XXX
+ SG_ BatteryVoltage : 7|24@0+ (0.001,0) [0|65535] "" XXX
+
+BO_ 958 PowerRunningTime: 8 XXX
+
+BO_ 1408 ServicesKGM: 8 XXX
+
+BO_ 1426 ServicesDME: 8 XXX
+
+BO_ 1449 ServicesDSC: 8 XXX
+
+BO_ 1504 ServicesKOMBI: 8 XXX
+
+BO_ 1522 ServicesKBM: 8 XXX
+
+BO_ 209 Accelerometer: 8 XXX
+ SG_ LateralAcceleration : 0|16@1- (1,0) [0|7] "" XXX
+ SG_ LongitudalAcceleration : 32|16@1- (1,0) [0|65535] "" XXX
+
+BO_ 172 WheelTorqueDrivetrain2: 8 XXX
+
+BO_ 128 Unknown80: 5 XXX
+ SG_ State2 : 24|4@1+ (1,0) [0|15] "" XXX
+ SG_ State1 : 23|8@0+ (1,0) [0|255] "" XXX
+ SG_ Counter1 : 31|4@0+ (1,0) [0|15] "" XXX
+
+BO_ 320 Unknown140: 2 XXX
+ SG_ State : 7|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 212 Unknown_d4: 8 XXX
+ SG_ State1 : 47|8@0+ (1,0) [0|255] "" XXX
+ SG_ Counter1 : 55|8@0+ (1,0) [0|255] "" XXX
+ SG_ Counter2 : 63|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 205 Unknown_cd: 8 XXX
+ SG_ NEW_SIGNAL_2 : 15|8@0+ (1,0) [0|255] "" XXX
+ SG_ NEW_SIGNAL_3 : 23|8@0+ (1,0) [0|255] "" XXX
+ SG_ NEW_SIGNAL_4 : 31|8@0+ (1,0) [0|255] "" XXX
+ SG_ NEW_SIGNAL_5 : 39|8@0- (1,0) [0|255] "" XXX
+ SG_ NEW_SIGNAL_6 : 47|8@0+ (1,0) [0|255] "" XXX
+ SG_ Counter1 : 55|4@0+ (1,0) [0|255] "" XXX
+ SG_ NEW_SIGNAL_1 : 7|8@0+ (1,0) [0|255] "" XXX
+ SG_ NEW_SIGNAL_7 : 63|8@0- (1,0) [0|255] "" XXX
+
+BO_ 1577 NEW_MSG_1: 8 XXX
+
+
+
+
+CM_ SG_ 170 ThrottlelPressed "Active when accelerator pedal pressed or cruise control drives";
+CM_ SG_ 170 AcceleratorPedalPressed "Active only when driver actually presses the pedal";
+CM_ SG_ 170 AcceleratorPedalPercentage "ToDo Factor to be adjusted";
+CM_ SG_ 170 EngineSpeed "It's hard to say that is even a rate";
+CM_ SG_ 404 plus1mph_request "Appears when +1mph/kph stalk is depressed";
+CM_ SG_ 404 minus1mph_request "Appears when -1mph/kph stalk is depressed";
+CM_ SG_ 404 Cancel_request_up_stalk "Appears when cancel stalk (up) is depressed";
+CM_ SG_ 404 Cancel_request_up_or_down_stalk "Appears when cancel stalk (up or down) is depressed";
+CM_ SG_ 404 Resume_request "It appears when resume stalk button is depressed";
+CM_ SG_ 404 Counter1 "It accelerates when requests are being sent";
+CM_ SG_ 404 Counter2 "It accelerates when requests are being sent";
+CM_ SG_ 404 notCancel_0xF "0xF unless cancel is requested then 0x0";
+CM_ SG_ 168 Brake_active2 "";
+CM_ SG_ 168 BrakePressed "Brake when driver presses the brake";
+CM_ SG_ 168 EngineTorque "Engine torque without inertia - combustion torque";
+CM_ SG_ 168 EngineTorqueWoInterv "Engine torque without inertia and without shift intervention";
+CM_ SG_ 403 CruiseControlSetpointSpeed "Speed target";
+CM_ SG_ 408 Gear "This is just provision, needs to be reverse engineered";
+CM_ SG_ 502 TurnSignalIdle "Turn signal off";
+CM_ SG_ 502 TurnSignalActive "Turn signal on or transitioning";
+CM_ SG_ 502 RightTurn "Indicates right blinker or when steering returning right clears left blinker";
+CM_ SG_ 502 LeftTurn "Indicates left blinker or when steering returning left clears right blinker";
+CM_ SG_ 502 HoldActivated "Spikes down if blinker cleared with timeout or turn. Stays off if blinker cleared with stalk";
+VAL_ 408 Gear 1 "D" 2 "S" 3 "N" 4 "R" 5 "P" ;
@@ -1,2 +1,2 @@
-from opendbc.can.parser_pyx import CANDefine # pylint: disable=no-name-in-module, import-error
+from opendbc.can.parser_pyx import CANDefine  # pylint: disable=no-name-in-module, import-error
 assert CANDefine
@@ -18,12 +18,55 @@ unsigned int toyota_checksum(unsigned int address, uint64_t d, int l) {
  d >>= 8; // remove checksum

  unsigned int s = l;
-  while (address) { s += address & 0xff; address >>= 8; }
-  while (d) { s += d & 0xff; d >>= 8; }
+  while (address) { s += address & 0xFF; address >>= 8; }
+  while (d) { s += d & 0xFF; d >>= 8; }

  return s & 0xFF;
 }

+unsigned int subaru_checksum(unsigned int address, uint64_t d, int l) {
+  d >>= ((8-l)*8); // remove padding
+
+  unsigned int s = 0;
+  while (address) { s += address & 0xFF; address >>= 8; }
+  l -= 1; // checksum is first byte
+  while (l) { s += d & 0xFF; d >>= 8; l -= 1; }
+
+  return s & 0xFF;
+}
+
+unsigned int chrysler_checksum(unsigned int address, uint64_t d, int l) {
+  /* This function does not want the checksum byte in the input data.
+  jeep chrysler canbus checksum from http://illmatics.com/Remote%20Car%20Hacking.pdf */
+  uint8_t checksum = 0xFF;
+  for (int j = 0; j < (l - 1); j++) {
+    uint8_t shift = 0x80;
+    uint8_t curr = (d >> 8*j) & 0xFF;
+    for (int i=0; i<8; i++) {
+      uint8_t bit_sum = curr & shift;
+      uint8_t temp_chk = checksum & 0x80U;
+      if (bit_sum != 0U) {
+        bit_sum = 0x1C;
+        if (temp_chk != 0U) {
+          bit_sum = 1;
+        }
+        checksum = checksum << 1;
+        temp_chk = checksum | 1U;
+        bit_sum ^= temp_chk;
+      } else {
+        if (temp_chk != 0U) {
+          bit_sum = 0x1D;
+        }
+        checksum = checksum << 1;
+        bit_sum ^= checksum;
+      }
+      checksum = bit_sum;
+      shift = shift >> 1;
+    }
+  }
+  return ~checksum & 0xFF;
+}
+
 // Static lookup table for fast computation of CRC8 poly 0x2F, aka 8H2F/AUTOSAR
 uint8_t crc8_lut_8h2f[256];

@@ -85,6 +128,12 @@ unsigned int volkswagen_crc(unsigned int address, uint64_t d, int l) {
    case 0x117: // ACC_10 Automatic Cruise Control
      crc ^= (uint8_t[]){0xAC,0xAC,0xAC,0xAC,0xAC,0xAC,0xAC,0xAC,0xAC,0xAC,0xAC,0xAC,0xAC,0xAC,0xAC,0xAC}[counter];
      break;
+    case 0x120: // TSK_06 Drivetrain Coordinator
+      crc ^= (uint8_t[]){0xC4,0xE2,0x4F,0xE4,0xF8,0x2F,0x56,0x81,0x9F,0xE5,0x83,0x44,0x05,0x3F,0x97,0xDF}[counter];
+      break;
+    case 0x121: // Motor_20 Driver Throttle Inputs
+      crc ^= (uint8_t[]){0xE9,0x65,0xAE,0x6B,0x7B,0x35,0xE5,0x5F,0x4E,0xC7,0x86,0xA2,0xBB,0xDD,0xEB,0xB4}[counter];
+      break;
    case 0x122: // ACC_06 Automatic Cruise Control
      crc ^= (uint8_t[]){0x37,0x7D,0xF3,0xA9,0x18,0x46,0x6D,0x4D,0x3D,0x71,0x92,0x9C,0xE5,0x32,0x10,0xB9}[counter];
      break;
@@ -100,6 +149,9 @@ unsigned int volkswagen_crc(unsigned int address, uint64_t d, int l) {
    case 0x30C: // ACC_02 Automatic Cruise Control
      crc ^= (uint8_t[]){0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F}[counter];
      break;
+    case 0x30F: // SWA_01 Lane Change Assist (SpurWechselAssistent)
+      crc ^= (uint8_t[]){0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C}[counter];
+      break;
    case 0x3C0: // Klemmen_Status_01 ignition and starting status
      crc ^= (uint8_t[]){0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3}[counter];
      break;
@@ -13,6 +13,8 @@
 // Helper functions
 unsigned int honda_checksum(unsigned int address, uint64_t d, int l);
 unsigned int toyota_checksum(unsigned int address, uint64_t d, int l);
+unsigned int subaru_checksum(unsigned int address, uint64_t d, int l);
+unsigned int chrysler_checksum(unsigned int address, uint64_t d, int l);
 void init_crc_lookup_tables();
 unsigned int volkswagen_crc(unsigned int address, uint64_t d, int l);
 unsigned int pedal_checksum(uint64_t d, int l);
@@ -18,7 +18,9 @@ cdef extern from "common_dbc.h":
    PEDAL_CHECKSUM,
    PEDAL_COUNTER,
    VOLKSWAGEN_CHECKSUM,
-    VOLKSWAGEN_COUNTER
+    VOLKSWAGEN_COUNTER,
+    SUBARU_CHECKSUM,
+    CHRYSLER_CHECKSUM

  cdef struct Signal:
    const char* name
@@ -38,6 +38,8 @@ enum SignalType {
  PEDAL_COUNTER,
  VOLKSWAGEN_CHECKSUM,
  VOLKSWAGEN_COUNTER,
+  SUBARU_CHECKSUM,
+  CHRYSLER_CHECKSUM,
 };

 struct Signal {
@@ -55,7 +55,7 @@ class dbc():

        name = dat.group(2)
        size = int(dat.group(3))
-        ids = int(dat.group(1), 0) # could be hex
+        ids = int(dat.group(1), 0)  # could be hex
        if ids in self.msgs:
          sys.exit("Duplicate address detected %d %s" % (ids, self.name))

@@ -73,15 +73,15 @@ class dbc():
          print("bad SG {0}".format(l))

        sgname = dat.group(1)
-        start_bit = int(dat.group(go+2))
-        signal_size = int(dat.group(go+3))
-        is_little_endian = int(dat.group(go+4))==1
-        is_signed = dat.group(go+5)=='-'
-        factor = int_or_float(dat.group(go+6))
-        offset = int_or_float(dat.group(go+7))
-        tmin = int_or_float(dat.group(go+8))
-        tmax = int_or_float(dat.group(go+9))
-        units = dat.group(go+10)
+        start_bit = int(dat.group(go + 2))
+        signal_size = int(dat.group(go + 3))
+        is_little_endian = int(dat.group(go + 4)) == 1
+        is_signed = dat.group(go + 5) == '-'
+        factor = int_or_float(dat.group(go + 6))
+        offset = int_or_float(dat.group(go + 7))
+        tmin = int_or_float(dat.group(go + 8))
+        tmax = int_or_float(dat.group(go + 9))
+        units = dat.group(go + 10)

        self.msgs[ids][1].append(
          DBCSignal(sgname, start_bit, signal_size, is_little_endian,
@@ -94,15 +94,15 @@ class dbc():
        if dat is None:
          print("bad VAL {0}".format(l))

-        ids = int(dat.group(1), 0) # could be hex
+        ids = int(dat.group(1), 0)  # could be hex
        sgname = dat.group(2)
        defvals = dat.group(3)

-        defvals = defvals.replace("?",r"\?") #escape sequence in C++
+        defvals = defvals.replace("?", r"\?")  # escape sequence in C++
        defvals = defvals.split('"')[:-1]

        # convert strings to UPPER_CASE_WITH_UNDERSCORES
-        defvals[1::2] = [d.strip().upper().replace(" ","_") for d in defvals[1::2]]
+        defvals[1::2] = [d.strip().upper().replace(" ", "_") for d in defvals[1::2]]
        defvals = '"'+"".join(str(i) for i in defvals)+'"'

        self.def_vals[ids].append((sgname, defvals))
@@ -29,6 +29,10 @@ const Signal sigs_{{address}}[] = {
      .type = SignalType::VOLKSWAGEN_CHECKSUM,
      {% elif checksum_type == "volkswagen" and sig.name == "COUNTER" %}
      .type = SignalType::VOLKSWAGEN_COUNTER,
+      {% elif checksum_type == "subaru" and sig.name == "CHECKSUM" %}
+      .type = SignalType::SUBARU_CHECKSUM,
+      {% elif checksum_type == "chrysler" and sig.name == "CHECKSUM" %}
+      .type = SignalType::CHRYSLER_CHECKSUM,
      {% elif address in [512, 513] and sig.name == "CHECKSUM_PEDAL" %}
      .type = SignalType::PEDAL_CHECKSUM,
      {% elif address in [512, 513] and sig.name == "COUNTER_PEDAL" %}
@@ -99,6 +99,12 @@ uint64_t CANPacker::pack(uint32_t address, const std::vector<SignalPackValue> &s
      // The correct fix is unclear but this works for the moment.
      unsigned int chksm = volkswagen_crc(address, ReverseBytes(ret), message_lookup[address].size);
      ret = set_value(ret, sig, chksm);
+    } else if (sig.type == SignalType::SUBARU_CHECKSUM) {
+      unsigned int chksm = subaru_checksum(address, ret, message_lookup[address].size);
+      ret = set_value(ret, sig, chksm);
+    } else if (sig.type == SignalType::CHRYSLER_CHECKSUM) {
+      unsigned int chksm = chrysler_checksum(address, ReverseBytes(ret), message_lookup[address].size);
+      ret = set_value(ret, sig, chksm);
    } else {
      //WARN("CHECKSUM signal type not valid\n");
    }
@@ -33,7 +33,7 @@ class BuildExtWithoutPlatformSuffix(build_ext):


 sourcefiles = ['packer_pyx.pyx']
-extra_compile_args = ["-std=c++11"]
+extra_compile_args = ["-std=c++14"]
 ARCH = subprocess.check_output(["uname", "-m"], encoding='utf8').rstrip()  # pylint: disable=unexpected-keyword-arg

 if ARCH == "aarch64":
@@ -54,7 +54,7 @@ setup(name='CAN packer',
          extra_compile_args=extra_compile_args,
          include_dirs=[
            BASEDIR,
-            os.path.join(BASEDIR, 'phonelibs', 'capnp-cpp/include'),
+            os.path.join(BASEDIR, 'phonelibs'),
          ],
          extra_link_args=[
            os.path.join(BASEDIR, 'opendbc', 'can', libdbc),
@@ -66,4 +66,3 @@ setup(name='CAN packer',

 if platform.system() == "Darwin":
  os.system("install_name_tool -change opendbc/can/libdbc.dylib "+BASEDIR+"/opendbc/can/libdbc.dylib packer_pyx.so")
-
@@ -57,6 +57,16 @@ bool MessageState::parse(uint64_t sec, uint16_t ts_, uint8_t * dat) {
        if (!update_counter_generic(tmp, sig.b2)) {
        return false;
      }
+    } else if (sig.type == SignalType::SUBARU_CHECKSUM) {
+      if (subaru_checksum(address, dat_be, size) != tmp) {
+        INFO("0x%X CHECKSUM FAIL\n", address);
+        return false;
+      }
+    } else if (sig.type == SignalType::CHRYSLER_CHECKSUM) {
+      if (chrysler_checksum(address, dat_le, size) != tmp) {
+        INFO("0x%X CHECKSUM FAIL\n", address);
+        return false;
+      }
    } else if (sig.type == SignalType::PEDAL_CHECKSUM) {
      if (pedal_checksum(dat_be, size) != tmp) {
        INFO("0x%X PEDAL CHECKSUM FAIL\n", address);
@@ -33,7 +33,7 @@ class BuildExtWithoutPlatformSuffix(build_ext):


 sourcefiles = ['parser_pyx.pyx']
-extra_compile_args = ["-std=c++11"]
+extra_compile_args = ["-std=c++14"]
 ARCH = subprocess.check_output(["uname", "-m"], encoding='utf8').rstrip()  # pylint: disable=unexpected-keyword-arg

 if ARCH == "aarch64":
@@ -54,7 +54,7 @@ setup(name='CAN parser',
          extra_compile_args=extra_compile_args,
          include_dirs=[
            BASEDIR,
-            os.path.join(BASEDIR, 'phonelibs', 'capnp-cpp/include'),
+            os.path.join(BASEDIR, 'phonelibs'),
          ],
          extra_link_args=[
            os.path.join(BASEDIR, 'opendbc', 'can', libdbc),
@@ -66,4 +66,3 @@ setup(name='CAN parser',

 if platform.system() == "Darwin":
  os.system("install_name_tool -change opendbc/can/libdbc.dylib "+BASEDIR+"/opendbc/can/libdbc.dylib parser_pyx.so")
-
@@ -19,10 +19,11 @@ def process(in_fn, out_fn):

  can_dbc = dbc(in_fn)

-  msgs = [(address, msg_name, msg_size, sorted(msg_sigs, key=lambda s: s.name not in ("COUNTER", "CHECKSUM"))) # process counter and checksums first
+  # process counter and checksums first
+  msgs = [(address, msg_name, msg_size, sorted(msg_sigs, key=lambda s: s.name not in ("COUNTER", "CHECKSUM")))
          for address, ((msg_name, msg_size), msg_sigs) in sorted(can_dbc.msgs.items()) if msg_sigs]

-  def_vals = {a: sorted(set(b)) for a, b in can_dbc.def_vals.items()} # remove duplicates
+  def_vals = {a: sorted(set(b)) for a, b in can_dbc.def_vals.items()}  # remove duplicates
  def_vals = sorted(def_vals.items())

  if can_dbc.name.startswith(("honda_", "acura_")):
@@ -46,6 +47,20 @@ def process(in_fn, out_fn):
    checksum_start_bit = 0
    counter_start_bit = 0
    little_endian = True
+  elif can_dbc.name.startswith(("subaru_global_")):
+    checksum_type = "subaru"
+    checksum_size = 8
+    counter_size = None
+    checksum_start_bit = 0
+    counter_start_bit = None
+    little_endian = True
+  elif can_dbc.name.startswith(("chrysler_")):
+    checksum_type = "chrysler"
+    checksum_size = 8
+    counter_size = None
+    checksum_start_bit = 7
+    counter_start_bit = None
+    little_endian = False
  else:
    checksum_type = None
    checksum_size = None
@@ -109,4 +124,3 @@ def main():

 if __name__ == '__main__':
  main()
-
@@ -43,7 +43,7 @@ BO_ 258 STEERING: 8 XXX
 SG_ STEERING_RATE : 20|13@0+ (0.3187251,-1305.498) [0|8191] "deg/s" XXX
 SG_ STEER_ANGLE : 4|13@0+ (0.3187251,-1307.888) [-360|360] "deg" XXX

-BO_ 514 SPEED_1: 4 XXX
+BO_ 514 SPEED_1: 8 XXX
 SG_ SPEED_LEFT : 7|12@0+ (0.071028,0) [0|65535] "m/s" XXX
 SG_ SPEED_RIGHT : 23|12@0+ (0.071028,0) [0|1023] "m/s" XXX

@@ -429,5 +429,5 @@ CM_ SG_ 625 SPEED "zero on non-acc drives";
 CM_ SG_ 625 ACCEL_PERHAPS "set to 7767 on non-ACC drives. ACC drive 40k is constant speed, 42k is accelerating";
 CM_ SG_ 268 BRAKE_PERHAPS "triggers only on ACC braking";
 CM_ SG_ 384 NEW_SIGNAL_1 "set in ACC gas driving. not set in electric human. not sure about gas human driving.";
-VAL_ 746 PRNDL 5 "Low" 4 "Drive" 3 "Neutral" 2 "Reverse" 1 "Park" ;
+VAL_ 746 PRNDL 5 "L" 4 "D" 3 "N" 2 "R" 1 "P" ;
 VAL_ 792 TURN_SIGNALS 2 "Right" 1 "Left" ;
@@ -47,6 +47,14 @@ BO_ 228 STEERING_CONTROL: 5 EON
 SG_ COUNTER : 37|2@0+ (1,0) [0|3] "" EPS
 SG_ CHECKSUM : 35|4@0+ (1,0) [0|15] "" EPS

+BO_ 229 BOSCH_SUPPLEMENTAL_1: 8 XXX
+ SG_ SET_ME_X04 : 0|8@1+ (1,0) [0|255] "" XXX
+ SG_ SET_ME_X00 : 8|8@1+ (1,0) [0|255] "" XXX
+ SG_ SET_ME_X80 : 16|8@1+ (1,0) [0|255] "" XXX
+ SG_ SET_ME_X10 : 24|8@1+ (1,0) [0|255] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" XXX
+
 BO_ 232 BRAKE_HOLD: 7 XXX
 SG_ XMISSION_SPEED : 7|14@0- (1,0) [1|0] "" XXX
 SG_ COMPUTER_BRAKE : 39|16@0+ (1,0) [0|0] "" XXX
@@ -54,13 +62,6 @@ BO_ 232 BRAKE_HOLD: 7 XXX
 SG_ COUNTER : 53|2@0+ (1,0) [0|3] "" XXX
 SG_ CHECKSUM : 51|4@0+ (1,0) [0|15] "" XXX

-BO_ 304 GAS_PEDAL_2: 8 PCM
- SG_ ENGINE_TORQUE_ESTIMATE : 7|16@0- (1,0) [-1000|1000] "Nm" EON
- SG_ ENGINE_TORQUE_REQUEST : 23|16@0- (1,0) [-1000|1000] "Nm" EON
- SG_ CAR_GAS : 39|8@0+ (1,0) [0|255] "" EON
- SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON
- SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" EON
-
 BO_ 330 STEERING_SENSORS: 8 EPS
 SG_ STEER_ANGLE : 7|16@0- (-0.1,0) [-500|500] "deg" EON
 SG_ STEER_ANGLE_RATE : 23|16@0- (-1,0) [-3000|3000] "deg/s" EON
@@ -167,6 +168,82 @@ BO_ 545 XXX_16: 6 SCM
 SG_ COUNTER : 45|2@0+ (1,0) [0|3] "" BDY
 SG_ CHECKSUM : 43|4@0+ (1,0) [0|15] "" BDY

+BO_ 576 LEFT_LANE_LINE_1: 8 CAM
+ SG_ LINE_DISTANCE_VISIBLE : 39|9@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_PROBABILITY : 46|6@0+ (0.015625,0) [0|1] "" XXX
+ SG_ LINE_OFFSET : 23|12@0+ (0.004,-8.192) [0|1] "Meters" XXX
+ SG_ LINE_ANGLE : 7|12@0+ (0.0005,-1.024) [0|1] "" XXX
+ SG_ FRAME_INDEX : 8|4@1+ (1,0) [0|15] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|1] "" XXX
+
+BO_ 577 LEFT_LANE_LINE_2: 8 CAM
+ SG_ LINE_FAR_EDGE_POSITION : 55|8@0+ (1,-128) [0|1] "" XXX
+ SG_ LINE_SOLID : 13|1@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_DASHED : 14|1@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_CURVATURE : 23|12@0+ (0.00001,-0.02048) [0|1] "" XXX
+ SG_ LINE_PARAMETER : 39|12@0+ (1,0) [0|1] "" XXX
+ SG_ FRAME_INDEX : 7|4@0+ (1,0) [0|15] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|1] "" XXX
+
+BO_ 579 RIGHT_LANE_LINE_1: 8 CAM
+ SG_ LINE_DISTANCE_VISIBLE : 39|9@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_PROBABILITY : 46|6@0+ (0.015625,0) [0|1] "" XXX
+ SG_ LINE_OFFSET : 23|12@0+ (0.004,-8.192) [0|1] "Meters" XXX
+ SG_ LINE_ANGLE : 7|12@0+ (0.0005,-1.024) [0|1] "" XXX
+ SG_ FRAME_INDEX : 8|4@1+ (1,0) [0|15] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|1] "" XXX
+
+BO_ 580 RIGHT_LANE_LINE_2: 8 CAM
+ SG_ LINE_FAR_EDGE_POSITION : 55|8@0+ (1,-128) [0|1] "" XXX
+ SG_ LINE_SOLID : 13|1@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_DASHED : 14|1@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_CURVATURE : 23|12@0+ (0.00001,-0.02048) [0|1] "" XXX
+ SG_ LINE_PARAMETER : 39|12@0+ (1,0) [0|1] "" XXX
+ SG_ FRAME_INDEX : 7|4@0+ (1,0) [0|15] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|1] "" XXX
+
+BO_ 582 ADJACENT_LEFT_LANE_LINE_1: 8 CAM
+ SG_ LINE_DISTANCE_VISIBLE : 39|9@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_PROBABILITY : 46|6@0+ (0.015625,0) [0|1] "" XXX
+ SG_ LINE_OFFSET : 23|12@0+ (0.004,-8.192) [0|1] "Meters" XXX
+ SG_ LINE_ANGLE : 7|12@0+ (0.0005,-1.024) [0|1] "" XXX
+ SG_ FRAME_INDEX : 8|4@1+ (1,0) [0|15] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|1] "" XXX
+
+BO_ 583 ADJACENT_LEFT_LANE_LINE_2: 8 CAM
+ SG_ LINE_FAR_EDGE_POSITION : 55|8@0+ (1,-128) [0|1] "" XXX
+ SG_ LINE_SOLID : 13|1@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_DASHED : 14|1@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_CURVATURE : 23|12@0+ (0.00001,-0.02048) [0|1] "" XXX
+ SG_ LINE_PARAMETER : 39|12@0+ (1,0) [0|1] "" XXX
+ SG_ FRAME_INDEX : 7|4@0+ (1,0) [0|15] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|1] "" XXX
+
+BO_ 585 ADJACENT_RIGHT_LANE_LINE_1: 8 CAM
+ SG_ LINE_DISTANCE_VISIBLE : 39|9@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_PROBABILITY : 46|6@0+ (0.015625,0) [0|1] "" XXX
+ SG_ LINE_OFFSET : 23|12@0+ (0.004,-8.192) [0|1] "Meters" XXX
+ SG_ LINE_ANGLE : 7|12@0+ (0.0005,-1.024) [0|1] "" XXX
+ SG_ FRAME_INDEX : 8|4@1+ (1,0) [0|15] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|1] "" XXX
+
+BO_ 586 ADJACENT_RIGHT_LANE_LINE_2: 8 CAM
+ SG_ LINE_FAR_EDGE_POSITION : 55|8@0+ (1,-128) [0|1] "" XXX
+ SG_ LINE_SOLID : 13|1@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_DASHED : 14|1@0+ (1,0) [0|1] "" XXX
+ SG_ LINE_CURVATURE : 23|12@0+ (0.00001,-0.02048) [0|1] "" XXX
+ SG_ LINE_PARAMETER : 39|12@0+ (1,0) [0|1] "" XXX
+ SG_ FRAME_INDEX : 7|4@0+ (1,0) [0|15] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|1] "" XXX
+
 BO_ 597 ROUGH_WHEEL_SPEED: 8 VSA
 SG_ WHEEL_SPEED_FL : 7|8@0+ (1,0) [0|255] "mph" EON
 SG_ WHEEL_SPEED_FR : 15|8@0+ (1,0) [0|255] "mph" EON
@@ -291,5 +368,9 @@ BO_ 891 STALK_STATUS_2: 8 XXX
 CM_ SG_ 479 AEB_STATUS "set for the duration of AEB event";
 CM_ SG_ 479 AEB_BRAKING "set when braking is commanded during AEB event";
 CM_ SG_ 479 AEB_PREPARE "set 1s before AEB";
-
+CM_ SG_ 576 LINE_DISTANCE_VISIBLE "Length of line visible, undecoded";
+CM_ SG_ 577 LINE_FAR_EDGE_POSITION "Appears to be a measure of line thickness, indicates location of the portion of the line furthest from the car, undecoded";
+CM_ SG_ 577 LINE_PARAMETER "Unclear if this is low quality line curvature rate or if this is something else, but it is correlated with line curvature, undecoded";
+CM_ SG_ 577 LINE_DASHED "1 = line is dashed";
+CM_ SG_ 577 LINE_SOLID "1 = line is solid";
 VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
@@ -56,6 +56,7 @@ BO_ 380 POWERTRAIN_DATA: 8 PCM

 BO_ 420 VSA_STATUS: 8 VSA
 SG_ USER_BRAKE : 7|16@0+ (0.015625,-1.609375) [0|1000] "" EON
+ SG_ COMPUTER_BRAKING : 23|1@0+ (1,0) [0|1] "" EON
 SG_ ESP_DISABLED : 28|1@0+ (1,0) [0|1] "" EON
 SG_ BRAKE_HOLD_RELATED : 52|1@0+ (1,0) [0|1] "" XXX
 SG_ BRAKE_HOLD_ACTIVE : 46|1@0+ (1,0) [0|1] "" EON
@@ -63,6 +64,13 @@ BO_ 420 VSA_STATUS: 8 VSA
 SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON
 SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" EON

+BO_ 427 STEER_MOTOR_TORQUE: 3 EPS
+ SG_ CONFIG_VALID : 7|1@0+ (1,0) [0|1] "" EON
+ SG_ MOTOR_TORQUE : 1|10@0+ (1,0) [0|256] "" EON
+ SG_ OUTPUT_DISABLED : 22|1@0+ (1,0) [0|1] "" EON
+ SG_ COUNTER : 21|2@0+ (1,0) [0|3] "" EON
+ SG_ CHECKSUM : 19|4@0+ (1,0) [0|15] "" EON
+
 BO_ 432 STANDSTILL: 7 VSA
 SG_ CONTROLLED_STANDSTILL : 0|1@0+ (1,0) [0|1] "" EON
 SG_ WHEELS_MOVING : 12|1@0+ (1,0) [0|1] "" EON
@@ -93,12 +101,15 @@ BO_ 506 BRAKE_COMMAND: 8 ADAS
 SG_ CRUISE_FAULT_CMD : 18|1@0+ (1,0) [0|1] "" EBCM
 SG_ CRUISE_CANCEL_CMD : 17|1@0+ (1,0) [0|1] "" EBCM
 SG_ COMPUTER_BRAKE_REQUEST : 16|1@0+ (1,0) [0|1] "" EBCM
- SG_ SET_ME_0X80 : 31|8@0+ (1,0) [0|1] "" EBCM
+ SG_ SET_ME_1 : 31|1@0+ (1,0) [0|1] "" EBCM
+ SG_ AEB_REQ_1 : 29|1@0+ (1,0) [0|1] "" XXX
+ SG_ AEB_REQ_2 : 26|3@0+ (1,0) [0|7] "" XXX
 SG_ BRAKE_LIGHTS : 39|1@0+ (1,0) [0|1] "" EBCM
 SG_ CRUISE_STATES : 38|7@0+ (1,0) [0|1] "" EBCM
 SG_ CHIME : 47|3@0+ (1,0) [0|7] "" EBCM
 SG_ ZEROS_BOH6 : 44|1@0+ (1,0) [0|1] "" EBCM
 SG_ FCW : 43|2@0+ (1,0) [0|3] "" EBCM
+ SG_ AEB_STATUS : 41|2@0+ (1,0) [0|3] "" XXX
 SG_ COMPUTER_BRAKE : 55|10@0+ (1,0) [0|1] "" EBCM
 SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EBCM
 SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" EBCM
@@ -138,7 +149,7 @@ BO_ 780 ACC_HUD: 8 ADAS
 SG_ BOH : 38|1@0+ (1,0) [0|1] "" BDY
 SG_ ACC_PROBLEM : 37|1@0+ (1,0) [0|1] "" BDY
 SG_ FCM_OFF : 36|1@0+ (1,0) [0|1] "" BDY
- SG_ BOH_2 : 35|1@0+ (1,0) [0|1] "" BDY
+ SG_ FCM_OFF_2 : 35|1@0+ (1,0) [0|1] "" BDY
 SG_ FCM_PROBLEM : 34|1@0+ (1,0) [0|1] "" BDY
 SG_ RADAR_OBSTRUCTED : 33|1@0+ (1,0) [0|1] "" BDY
 SG_ ENABLE_MINI_CAR : 32|1@0+ (1,0) [0|1] "" BDY
@@ -148,10 +159,12 @@ BO_ 780 ACC_HUD: 8 ADAS
 SG_ BOH_4 : 42|1@0+ (1,0) [0|3] "" BDY
 SG_ BOH_5 : 41|1@0+ (1,0) [0|3] "" BDY
 SG_ CRUISE_CONTROL_LABEL : 40|1@0+ (1,0) [0|3] "" BDY
- SG_ HUD_DISTANCE_3 : 52|1@0+ (1,0) [0|1] "" BDY
- SG_ IMPERIAL_UNIT : 54|1@0+ (1,0) [0|1] "" BDY
 SG_ SET_ME_X01_2 : 55|1@0+ (1,0) [0|1] "" BDY
+ SG_ IMPERIAL_UNIT : 54|1@0+ (1,0) [0|1] "" BDY
+ SG_ HUD_DISTANCE_3 : 52|1@0+ (1,0) [0|1] "" BDY
+ SG_ CHIME : 51|3@0+ (1,0) [0|1] "" BDY
 SG_ SET_ME_X01 : 48|1@0+ (1,0) [0|1] "" BDY
+ SG_ ICONS : 63|2@0+ (1,0) [0|1] "" BDY
 SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" BDY
 SG_ CHECKSUM : 59|4@0+ (1,0) [0|3] "" BDY

@@ -201,6 +214,7 @@ BO_ 1029 DOORS_STATUS: 8 BDY
 SG_ CHECKSUM : 59|4@0+ (1,0) [0|3] "" EON

 CM_ SG_ 490 LONG_ACCEL "wheel speed derivative, noisy and zero snapping";
+CM_ SG_ 506 AEB_REQ_1 "set for duration of suspected AEB event";
 CM_ SG_ 773 PASS_AIRBAG_ON "Might just be indicator light";
 CM_ SG_ 773 PASS_AIRBAG_OFF "Might just be indicator light";
 CM_ SG_ 780 CRUISE_SPEED "255 = no speed";
@@ -210,6 +224,7 @@ CM_ SG_ 829 BEEP "beeps are pleasant, chimes are for warnngs etc...";

 VAL_ 506 FCW 3 "fcw" 2 "fcw" 1 "fcw" 0 "no_fcw" ;
 VAL_ 506 CHIME 4 "double_chime" 3 "single_chime" 2 "continuous_chime" 1 "repeating_chime" 0 "no_chime" ;
+VAL_ 506 AEB_STATUS 3 "aeb_prepare" 2 "aeb_ready" 1 "aeb_braking" 0 "no_aeb" ;
 VAL_ 780 CRUISE_SPEED 255 "no_speed" 252 "stopped" ;
 VAL_ 780 HUD_LEAD 3 "acc_off" 2 "solid_car" 1 "dashed_car" 0 "no_car" ;
 VAL_ 829 BEEP 3 "single_beep" 2 "triple_beep" 1 "repeated_beep" 0 "no_beep" ;
@@ -1,5 +1,12 @@
 CM_ "IMPORT _bosch_2018.dbc"

+BO_ 304 GAS_PEDAL_2: 8 PCM
+ SG_ ENGINE_TORQUE_ESTIMATE : 7|16@0- (1,0) [-1000|1000] "Nm" EON
+ SG_ ENGINE_TORQUE_REQUEST : 23|16@0- (1,0) [-1000|1000] "Nm" EON
+ SG_ CAR_GAS : 39|8@0+ (1,0) [0|255] "" EON
+ SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" EON
+ 
 BO_ 401 GEARBOX: 8 PCM
 SG_ GEAR_SHIFTER : 5|6@0+ (1,0) [0|63] "" EON
 SG_ BOH : 45|6@0+ (1,0) [0|63] "" XXX
@@ -1,5 +1,12 @@
 CM_ "IMPORT _bosch_2018.dbc"

+BO_ 304 GAS_PEDAL_2: 8 PCM
+ SG_ ENGINE_TORQUE_ESTIMATE : 7|16@0- (1,0) [-1000|1000] "Nm" EON
+ SG_ ENGINE_TORQUE_REQUEST : 23|16@0- (1,0) [-1000|1000] "Nm" EON
+ SG_ CAR_GAS : 39|8@0+ (1,0) [0|255] "" EON
+ SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" EON
+ 
 BO_ 419 GEARBOX: 8 PCM
 SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON
 SG_ CHECKSUM : 59|4@0+ (1,0) [0|3] "" EON
@@ -1,5 +1,12 @@
 CM_ "IMPORT _bosch_2018.dbc"

+BO_ 304 GAS_PEDAL_2: 8 PCM
+ SG_ ENGINE_TORQUE_ESTIMATE : 7|16@0- (1,0) [-1000|1000] "Nm" EON
+ SG_ ENGINE_TORQUE_REQUEST : 23|16@0- (1,0) [-1000|1000] "Nm" EON
+ SG_ CAR_GAS : 39|8@0+ (1,0) [0|255] "" EON
+ SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" EON
+ 
 BO_ 401 GEARBOX: 8 PCM
 SG_ GEAR_SHIFTER : 5|6@0+ (1,0) [0|63] "" EON
 SG_ BOH : 45|6@0+ (1,0) [0|63] "" XXX
@@ -0,0 +1,57 @@
+CM_ "IMPORT _bosch_2018.dbc"
+
+BO_ 316 GAS_PEDAL_2: 8 XXX
+ SG_ CAR_GAS : 39|8@0+ (1,0) [0|255] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" XXX
+
+BO_ 419 GEARBOX: 8 XXX
+ SG_ GEAR_SHIFTER : 24|8@1+ (1,0) [0|255] "" XXX
+ SG_ GEAR : 32|8@1+ (1,0) [0|255] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" XXX
+
+BO_ 432 STANDSTILL: 7 VSA
+ SG_ WHEELS_MOVING : 12|1@0+ (1,0) [0|1] "" EON
+ SG_ BRAKE_ERROR_1 : 11|1@0+ (1,0) [0|1] "" EON
+ SG_ BRAKE_ERROR_2 : 9|1@0+ (1,0) [0|1] "" EON
+ SG_ COUNTER : 53|2@0+ (1,0) [0|3] "" EON
+ SG_ CHECKSUM : 51|4@0+ (1,0) [0|15] "" EON
+
+BO_ 892 CRUISE_PARAMS: 8 PCM
+ SG_ CRUISE_SPEED_OFFSET : 31|8@0- (0.1,0) [-128|127] "kph" EON
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|3] "" EON
+ SG_ COUNTER : 61|2@0+ (1,0) [0|15] "" EON
+
+BO_ 927 RADAR_HUD: 8 RADAR
+ SG_ ZEROS_BOH : 7|10@0+ (1,0) [0|127] "" BDY
+ SG_ CMBS_OFF : 12|1@0+ (1,0) [0|1] "" BDY
+ SG_ ZEROS_BOH3 : 31|32@0+ (1,0) [0|4294967295] "" XXX
+ SG_ RESUME_INSTRUCTION : 21|1@0+ (1,0) [0|1] "" XXX
+ SG_ SET_TO_1 : 13|1@0+ (1,0) [0|1] "" BDY
+ SG_ ZEROS_BOH2 : 11|4@0+ (1,0) [0|1] "" XXX
+ SG_ APPLY_BRAKES_FOR_CANC : 23|1@0+ (1,0) [0|1] "" XXX
+ SG_ ACC_ALERTS : 20|5@0+ (1,0) [0|1] "" BDY
+ SG_ SET_TO_0 : 22|1@0+ (1,0) [0|1] "" XXX
+ SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" XXX
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" XXX
+
+BO_ 1029 DOORS_STATUS: 8 BDY
+ SG_ DOOR_OPEN_FL : 37|1@0+ (1,0) [0|1] "" EON
+ SG_ DOOR_OPEN_FR : 38|1@0+ (1,0) [0|1] "" EON
+ SG_ DOOR_OPEN_RL : 39|1@0+ (1,0) [0|1] "" EON
+ SG_ DOOR_OPEN_RR : 40|1@0+ (1,0) [0|1] "" EON
+ SG_ TRUNK_OPEN : 41|1@0+ (1,0) [0|1] "" EON
+ SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" EON
+
+VAL_ 419 GEAR_SHIFTER 2 "S" 32 "D" 16 "N" 8 "R" 4 "P" ;
+VAL_ 419 GEAR 26 "S" 20 "D" 19 "N" 18 "R" 17 "P" ;
+VAL_ 545 ECON_ON_2 0 "off" 3 "on" ;
+VAL_ 662 CRUISE_BUTTONS 7 "tbd" 6 "tbd" 5 "tbd" 4 "accel_res" 3 "decel_set" 2 "cancel" 1 "main" 0 "none" ;
+VAL_ 662 CRUISE_SETTING 3 "distance_adj" 2 "tbd" 1 "lkas_button" 0 "none" ;
+VAL_ 806 CMBS_BUTTON 3 "pressed" 0 "released" ;
+VAL_ 891 WIPERS 4 "High" 2 "Low" 0 "Off" ;
+VAL_ 829 BEEP 3 "single_beep" 2 "triple_beep" 1 "repeated_beep" 0 "no_beep" ;
+
+CM_ "CHFFR_METRIC 330 STEER_ANGLE STEER_ANGLE 0.36 180; CHFFR_METRIC 380 ENGINE_RPM ENGINE_RPM 1 0; CHFFR_METRIC 804 ENGINE_TEMPERATURE ENGINE_TEMPERATURE 1 0";
@@ -1,5 +1,12 @@
 CM_ "IMPORT _bosch_2018.dbc"

+BO_ 304 GAS_PEDAL_2: 8 PCM
+ SG_ ENGINE_TORQUE_ESTIMATE : 7|16@0- (1,0) [-1000|1000] "Nm" EON
+ SG_ ENGINE_TORQUE_REQUEST : 23|16@0- (1,0) [-1000|1000] "Nm" EON
+ SG_ CAR_GAS : 39|8@0+ (1,0) [0|255] "" EON
+ SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" EON
+ 
 BO_ 401 GEARBOX: 8 PCM
 SG_ GEAR_SHIFTER : 5|6@0+ (1,0) [0|63] "" EON
 SG_ BOH : 45|6@0+ (1,0) [0|63] "" XXX
@@ -1,5 +1,12 @@
 CM_ "IMPORT _bosch_2018.dbc"

+BO_ 304 GAS_PEDAL_2: 8 PCM
+ SG_ ENGINE_TORQUE_ESTIMATE : 7|16@0- (1,0) [-1000|1000] "Nm" EON
+ SG_ ENGINE_TORQUE_REQUEST : 23|16@0- (1,0) [-1000|1000] "Nm" EON
+ SG_ CAR_GAS : 39|8@0+ (1,0) [0|255] "" EON
+ SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON
+ SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" EON
+ 
 BO_ 419 GEARBOX: 8 PCM
 SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON
 SG_ CHECKSUM : 59|4@0+ (1,0) [0|3] "" EON
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Rick Lan	9f4c668064	fix hash	2020-11-10 16:40:01 +10:00
Rick Lan	0dad5cfc7e	update ota/recovery url	2020-11-10 12:38:46 +10:00
Rick Lan	037bc6b1f2	update sentry	2020-09-23 15:04:21 +10:00
Rick Lan	e323b8ef0e	dragonpilot 0.7.6.1 ======================== * Based on latest openpilot 0.7.6.1 devel. * Optimized and integrated several dp services. (Settings have been renamed, please re-config all settings) * Completely disabled steer ratio learner. * Removed Accel Profile. * Added Honda Breeze Hybrid FPv1. (Thanks to @劉駿) * Added Taiwan Toyota Prius 4.5 FPv1. (Thanks to @jeekid)	2020-07-06 20:58:16 +10:00
Willem Melching	9e7fb4680d	Revert "add wrong neos version alert (#1725 )" This reverts commit `9ff1fb48de`.	2020-06-19 16:50:38 -07:00
Willem Melching	40982f18ab	update affected order numbers	2020-06-16 13:42:35 -07:00
Willem Melching	4d47e1243d	hotfix release: 0.7.6.1 (#1727 ) * neos update with just kernel * Bump version and update release notes * Only add neos update, no other stuff	2020-06-16 13:39:29 -07:00
Willem Melching	9ff1fb48de	add wrong neos version alert (#1725 )	2020-06-16 12:49:38 -07:00
Willem Melching	51aa86da12	run deleter when offroad	2020-06-05 15:02:26 -07:00
Willem Melching	6e00ef601d	boardd: no conflate on sendcan (#1645 )	2020-06-05 15:01:59 -07:00
Adeeb	db7ea2a599	fix speed too low (#1628 )	2020-06-02 18:40:39 -07:00
Willem Melching	682dc5ddad	speedTooHigh should not be an immediate disable	2020-06-01 17:13:13 -07:00
Willem Melching	3b62a21fa7	Fix low speed engage on stop and go Hondas (#1613 ) * fix low speed engage on stop and go Hondas * update ref commit	2020-06-01 10:15:03 -07:00
Jafar Al-Gharaibeh	ffe062c774	Mazda: Slower rate for ACC cancel msg to avoid cruise disable (#1615 ) * Slower rate for ACC cancel msg to avoid cruise disable Sending ACC cancel message at 10hz may end up disabling main cruise state. That is because stoc ACC use the same signal for both functions. If cruise is already enabled the signal canceles it, otherwise cruise is disabled. 10hz seems to be still fast in some cases not allowing the state to sync up between OP and the Stock state. 5hz avoids that issue. Also, the resume message was also updated to 5hz as that seems to work better as well. Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com> * Round up 27.96 to 28mph Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>	2020-06-01 10:08:14 -07:00
Vehicle Researcher	4fd2b0e730	openpilot v0.7.6 release	2020-05-31 13:22:49 -07:00
Vehicle Researcher	2d659de09c	Merge opendbc subtree	2020-05-31 13:22:45 -07:00
Vehicle Researcher	35bd9d9fb3	Squashed 'opendbc/' changes from f1e69a6cf..e92e74311 e92e74311 whitespace after comma 5d33ec0f1 two spaces before inline comment 73685b609 fix linter complaint about whitespace around operators b15edbc1b fix linter complaint about inline comment whitespace 4ac30725b clean up blank lines 0430bfa5c run pre commit in ci (#268) 2ade6eeba Subaru DBC update (#242) d1185a53e Toyota ACC_CONTROL PERMIT_BRAKING and ACCEL_CMT_ALT speculated definition (#258) e6766bbbb Update SCC ECU Messages for OP Long Dev. (#267) b49b9ee75 Add DAW (#175) 3b5cccba0 Fixed up cell voltage readings and added more commands (#220) 8b0449327 Mazda: add missing static bits, tidy up endianness (#263) 124719992 Add BSD_RCTA to Subaru Global (#244) af1821f84 fix endianness in signal from new hyundai message 7ef41084b Add gas/brake message for hyundai EVs, from @TK211X 472aabb4f Subaru preglobal update (#260) 45c0d9ecc fix lta message (#262) 11343c108 Library cleanup (#261) 67d70cb86 Fix Toyota message size git-subtree-dir: opendbc git-subtree-split: e92e74311a7ed66922629bec4b8cee7c8db1b9f0	2020-05-31 13:22:45 -07:00
Vehicle Researcher	f878928731	Merge panda subtree	2020-05-31 13:22:43 -07:00
Vehicle Researcher	771a8b7a55	Squashed 'panda/' changes from 869f12321..49ffbe99f 49ffbe99f disable non-universal checks in hyundai safety 3a85f4c25 use whole route when running safety replay from CLI 098f47a5b Fix leaf brake rx check (#547) b8267341a Add pre commit checks + CI (#545) 339976c3c document tx message addresses better (#543) a618e64d1 fix typing errors 9bece64e8 use mazda init 08db086d5 mazda cleanup 89658d0bd Mazda: safety tests add missing safety checks (#525) bdec1398e Fix length of 0x20b in NISSAN_TX_MSGS, wasn't cancelling ACC (#544) b48c74c2e Adding UNO to automated tests (#538) a5802cdd1 Hyundai: remove unused message from RX checks 9ebde2535 Reset state on safety mode init (#542) d4f3f15c3 Refactor addr check (#541) 5210e51b8 remove unused files 065706459 Hyundai checksum (#540) 07e668eca Fast CI (#539) 5307bf727 Fix multi message iso tp requests 0610ed1e2 Hyundai wheel speed counter is actually 4 bits spread over two signals 0d581aa5f dockerfile optimization eaefa2f6c fix docker file path 243a65f30 pull base image 0dd9470af only push to dockerhub from master 55b79b472 GitHub Actions (#535) b2c720bf4 Dos (#533) 01bf74024 remove 0x1BE checksum test 0bd06c9e0 remove 0x1BE check (breaks some vehicles) c31b899a5 honda bosch longitudinal safety 66250c41d Disable docker layer caching (#534) 6b19fa496 include nissan safety in release build db31886ad gate mazda safety behind debug flag e4558c073 Safety: message length check on RX and TX (#529) git-subtree-dir: panda git-subtree-split: 49ffbe99f65e64d23d27d9d3e37f68bc2368dccd	2020-05-31 13:22:43 -07:00
Vehicle Researcher	fcd5a66252	Merge cereal subtree	2020-05-31 13:22:41 -07:00
Vehicle Researcher	23bbf52578	Squashed 'cereal/' changes from 12aad06e1..286b7e58b 286b7e58b capitalize docker command 0adfc7e77 add canErrorPersistent event c8be73d10 use github url instead of gitlab mirror 8e2d212a3 add pre-commit static analysis (#48) f27222f8f add gpsOK flag to liveLocationKalman 4bb1eb826 submaster always conflates 30838d40a C++ implementation of SubMaster and PubMaster (#42) c1a6d75d1 Fix potential segfault in MSGQPubSocket::connect (#45) 67fae6afc Use ZMQ on MacOS (#46) 01cdf832c add default values for backwards compat c96381b0d add OK flags to locationd output d589d5e3d add white panda deprecation events 856c9812d mark unused car events as deprecated 4f68db8f6 remove unnecessary new event type 9073b9b1b Library cleanup (#43) 7a786d9ce move remaining alerts to car events d6f10a4b9 add alert event type git-subtree-dir: cereal git-subtree-split: 286b7e58b5e7ede697370acc77fc7cca21d69764	2020-05-31 13:22:40 -07:00
Willem Melching	abfe469d95	interrupt number different on EON	2020-05-12 15:15:27 -07:00
Willem Melching	a39e33b9d0	add latest revision of the model	2020-05-11 10:14:46 -07:00
Willem Melching	c9c66ce21a	Fix counter in HKG clu11 message (#1484 ) * fix counter in clu11 message * update ref	2020-05-10 20:14:15 -07:00
Vehicle Researcher	ddee718536	openpilot v0.7.5 release	2020-05-09 13:01:35 -07:00
Vehicle Researcher	e0ab166ed3	Squashed 'opendbc/' changes from a62d5dd84..f1e69a6cf f1e69a6cf Fix wrong message size in Chrysler 54482cfb0 Fix GM message signal sizes 4e796e06d Fix wrong message sizes in Nissan fb6c1ee2b Better GEAR signal tracking the gear stick rather than the gear box (#257) d7a2efbbd Raw angle signal data for easy checksum calc, and one less gear bit (#254) 7456061a7 add checksum check to can parser for subaru 7f3b1774d Chrysler: calculate checksum in can packer/parser (#255) 0c0215516 Rename BYTE_ to SET_ME_X (#253) 1efe437cf Add values for a static 0xe5 (honda bosch) (#250) 7dffe0bd9 Create DBC for HRV (#248) b69398525 Add LFAHDA message to hyundai a57e7ddbd CANPacker: Subaru checksum support (#241) 36c471e59 Fixed signals order and added new signals for subaru global (#221) 7b5a1fcc1 BMW 2008-2013 (#230) cc09af763 Add RPM signal (#216) 47db9238f Add SWA_01 message detail and CRC support for VW MQB (#236) c98fe2ab9 Fixed signal unknown1 overlapping the button bits (#239) 572261ee3 Rear Cross Traffic Alert 044730aeb Speed limit signs 87b1a21fb Pedals/gear, gas pedal scale value ce78044d8 Tracking the steer angle with LKAS signal 7f19ab415 Introduce the new mazda 3 2019/2020 dbc e58520619 traffic sign speed limit 00bad5ee7 Speed Auto High Beam Traffic signs 9d080ea42 Nissan leaf (#238) 50fbbe739 nissan x trail cleanup (#237) git-subtree-dir: opendbc git-subtree-split: f1e69a6cf91cdaf1b8008d73f6fbb6634fbbeb42	2020-05-09 13:01:32 -07:00
Vehicle Researcher	7e908db510	Merge opendbc subtree	2020-05-09 13:01:32 -07:00
Vehicle Researcher	eb0dff8438	Squashed 'panda/' changes from 0696730c1..869f12321 869f12321 Hyundai: counter check (#530) a4390713e gitignore for route logs ac1b64e62 Fix CAN Ignition for Black Panda and Uno (#526) 273e3882f When initializing all the CAN busses, make sure the are also cleared (#527) c2bea78f6 Fix python library on Windows (#523) 0a123b181 that too ba6355d4c unused lines c9102c00e Chrysler: use can packer in safety tests (#522) 9874e7335 Abstract steering safety tests for Toyota and Chrysler (#520) 2299ecffc Block 0xe5 (Honda Bosch) at the panda/uno. Only allow static values. (#515) 351730611 Subaru: fix steer torque scaling (#501) 0bc864b3d Make torque-based steering state global (#518) d9355c414 Make cruise_engaged_prev a global + test case for it (#519) 211537641 Abstract sample speed test (#516) 11dc9054f remove unused function e5a586eea Abstract gas interceptor tests (#517) 1dbed65e3 Safety Test Refactor: Honda (#495) 0632710ac base class for different panda safety tests bd98fe603 safety tests: use shorter function name ba59ada0e No ESP in non-white (#514) c3336180b Fix the CAN init fix (#513) 884afa0ef Safety Test Refactor: Chrysler and Volkswagen PQ (#508) d77b72d16 Safety Test Refactor: Nissan (#510) 4c7755c47 Match Panda DFU entry fix in "make recover" process (#509) 0336f625d Pedal gas pressed safety limits (#507) 715b1a169 Hyundai-Kia-Genesis (HKG) (#503) 6f105e827 Safety Test Refactor: Subaru (#502) 57cc954f2 Safety Test Refactor: GM (#504) dd01c3b9c Safety Test Refactor: Hyundai (#505) 592c2c864 add support to can_unique.py for Cabana CSV format. (#506) ccf13b7af No more infinite while loops in CAN init (#499) 6c442b4c3 Safety Test Refactor: Volkswagen MQB (#493) f07a6ee7c panda recover should go through bootstub first (#498) 8cc3a3570 remove cadillac (#496) 62e4d3c36 Chrysler: fix missing button signal on TX (#490) abce8f32b Safety Test Refactor: Toyota + support code (#491) 500370aec Make sure relay faults make it to the health packet (#492) bc90b60f9 toyota: use universal gas pressed bit (#488) 74d10ccd3 Fixed possible race condition (#487) a05361ebc cleanup safety_replay dockerfile (#486) fe73dcc91 Openpilot-tools is deprecated (#484) da8e00f11 TX message guaranteed delivery (#421) d8f618492 Add ISO number for longitudinal limits flag comment 6a60b7811 touch ups 2ce65361d comments on unsafe flags d88013450 remove from there as well 055ea07ee remove that unsafe flag since it isn't implemented and it's unclear how to 4e98bbe8c Apply unsafe allow gas mode to all cars. (#480) 0c2c14949 Fixing libusb busy error (#174) 753c42cf5 Update Board Mac SDK Install script to work on clean mac (#146) b9a9ea395 Unsafe gas disengage mods, fix test compile warning (#481) 08ef92d58 Safety model for Volkswagen PQ35/PQ46/NMS (#474) 51e0a55d6 Support code for unsafe mode unit tests (#478) 5325b62bb current_safety_mode 7908b7224 update updating unsafe mode 98503e866 disable stock honda AEB in unsafe mode (#477) 01b2ccbed one more 9a30265a8 weak steering while not engaged 577f10b1a added options for unsafe mode 83cf7bf4c update comment 4556e7494 enable unsafe mode, toggle for use by forks that so choose de89fcdc4 Nissan leaf (#473) git-subtree-dir: panda git-subtree-split: 869f1232186f440eb388df82b85b88d346899199	2020-05-09 13:01:28 -07:00
Vehicle Researcher	d1aff96611	Merge panda subtree	2020-05-09 13:01:28 -07:00
Vehicle Researcher	5bfae8d806	Squashed 'cereal/' changes from 65119906..12aad06e 12aad06e no more c capnp 0050e0ac stockFcw event 2c325ed3 gasPressed event 8573a24d don't duplicate ordinals 3f384efa add carState.steerWarning and carState.steerError 8b347b0a add repeated warning2 3adb8991 add sharpness metric 65af4368 Add relayMalfunction alert 442e914d add preview driver flag c8e5db83 Add comment to faulttype 975a633b Add all panda fault types to health 93ccbcb7 UiLayoutState: add mockEngaged for onboarding 9dbbb545 UiLayoutState: add 'none' app c820f83d Add offroadLayout service e370f795 Add the laneChangeBlocked Event (#40) 35040fe6 Update service documentation (#39) 8f13dfca Additional car params auto-detection in support of VW (#38) 22986de4 add speedTooHigh alert f515e4db Add invalid lkas setting alert 59087620 gnustl_shared is only for android b0c746b1 solve by renaming event name instead of service df82a53c the service is called androidLogEntry git-subtree-dir: cereal git-subtree-split: 12aad06e12f249e57abda1664fb0c85e484a0c5d	2020-05-09 13:01:20 -07:00
Vehicle Researcher	d692982601	Merge cereal subtree	2020-05-09 13:01:20 -07:00
robbederks	cc6358d983	Power monitoring fix (#1269 ) * Release lock after exceptions * No pulsed measurement on uno * Fix last_measurement_time=None while integrating when going offroad * Also clear next pulsed measurement time * Move around locks * Locks are good now?	2020-03-23 18:03:15 -07:00
Willem Melching	a5c3340c8d	Fix kernel logging in logcatd, fixes #957	2020-03-17 17:03:10 -07:00
Willem Melching	fa98a83b06	camerad zmq_poll, also recover from EAGAIN	2020-03-17 13:47:15 -07:00
Vehicle Researcher	d1ad7f3fe1	openpilot v0.7.4 release	2020-03-16 16:19:36 -07:00
Vehicle Researcher	72427d8cc4	Squashed 'opendbc/' changes from 2ae0327ea..a62d5dd84 a62d5dd84 Add TSK_06 CRC validation for VW MQB (#234) ce723756f Fixed up sign on Driver Torque, added unit (#233) bd72c72be Added ProPilot HUD messages (#231) f308ca62e Subaru: added counter and checksum to brake msg d1f76d609 Add Motor_20 CRC support (#229) 6252718a9 Add STEER_ANGLE to all STEER_TORUQE_SENSOR messages (#228) c0b426126 Revert "add angle field in torque sensor message to all cars (#227)" bd82848c7 add angle field in torque sensor message to all cars (#227) 56f0259df Lexus CTH fix: brake pressed is on bit 5 like corolla and rav4 9b6ca31b2 fix: Replicate changes done on _honda_2017.dbc (#225) 1bd26d0a6 Added messages. Cleaned up endianness (#226) 44b9e74fa Revert "Toyota: add checksum to BRAKE_MODULE (#224)" 8b18c92e2 Toyota: add checksum to BRAKE_MODULE (#224) 2bab4d6d7 Add Honda-Bosch lane line detection signals. (#223) a1aa3b78f Cleanup of Nissan DBC (#218) c1f764828 reverting changes to Chrysler: speed message seems different from car to car 2de8e9e82 Chrysler: Speed msg is 5 bytes f4ac315ed Chrysler: add counter to 514 0fb62cf86 Toyota Blind Spot Monitor (TSS2-only?) (#219) git-subtree-dir: opendbc git-subtree-split: a62d5dd847c352be2daf28288f093f4c25a8308d	2020-03-16 16:19:33 -07:00
Vehicle Researcher	9397e18742	Merge opendbc subtree	2020-03-16 16:19:33 -07:00
Vehicle Researcher	0e793367de	Merge panda subtree	2020-03-16 16:19:33 -07:00
Vehicle Researcher	a3690e4034	Squashed 'panda/' changes from 769ade051..0696730c1 0696730c1 Toyota: add missing offset from speed signal (#469) 5b1a8dc87 Filtering LKAS HUD messages (#468) 99050f412 test_spam_can_buses was missing from Nissan 0f21b19bb Cleanup pedal nomenclature (#467) ceff91d3c Standardize brake safety tests (#465) 04809e132 Hyundai brake check (#464) 74c8ee0a7 Subaru brake check (#463) 4ecc6b358 Cleanup: avoid unnecessary bus checks in rx hooks c7d0d5fc7 Volkswagen safety updates: Phase 3 (#462) 436874885 WIP: Toyota brake check. (#459) 2ef996fd9 fix addr frequencies e063b2688 Second test fix tentative 88e25938f This should fix the test replay ebb88665c Added NISSAN replay test b2dbb504d remove toyota ipas safety code and tests (#460) a379faf2b White Panda's Wi-Fi setup instructions (#457) 11ef24bc1 Improve tests (#456) fb02390d4 Subaru checksum counter (#455) 9a4449987 Fix Subaru Legacy Torque driver bug (#454) dfa6b079d separating subary legacy safety mode from global (#452) dad5858b8 Chrysler: add brakepress cancellation (#451) db94a5b81 Added Nissan safety (#244) d7f1195d1 Chrysler Checksum/counter (#450) 96e535e5a abstract crc function (#448) 1b49d3e83 Hyundai: add gas disengage and tests (#447) 598074c19 Volkswagen safety updates: Phase 2 (#445) b2ffaae60 Chrysler: disengage on gas press (#442) 2ebbe3616 Subaru: disengage on gas press (#446) ccf75c456 Volkswagen safety updates: Phase 1 (#444) git-subtree-dir: panda git-subtree-split: 0696730c140dfb537e3a102ee6334c334f9a087f	2020-03-16 16:19:32 -07:00
Vehicle Researcher	29f108de10	Squashed 'cereal/' changes from eba4349b9..651199064 651199064 log focus state 8efe413a4 qlog radarState eeb3d5697 Add liveLocationKalman to qlogs 128b3f9a3 add networkStrength to thermal (#36) 2e5cbfc83 Create and init message in one line with `new_message` in messaging (#35) 458910759 not everyone likes gpstime 17363e988 support for end of log sentinel (#34) f6e9345cb val valid is confusing bb2cc7572 fix duplicate ordinals 0c38fc9e1 Add blindspot cereal values (#26) bd9a877d8 pulse desire and e2e 20c7fd608 Add subaru pre-Global safety mode 522ff85d9 Merge pull request #31 from commaai/good_location_packet ab07f229d deprecate b03c2c52a already exists 166418c00 improvements 97373f9d2 or rigor in american 365abba2e rigour 25eaf9df5 add espDisabled to carState (#30) bb1312128 add honda ecus (#29) git-subtree-dir: cereal git-subtree-split: 6511990644c5a133518b88d0cdaec089d216f607	2020-03-16 16:19:31 -07:00
Vehicle Researcher	a091133e80	Merge cereal subtree	2020-03-16 16:19:31 -07:00
ZwX1616	42e0d13389	revert AF for release (#1160 ) * Update camera_qcom.c * Update RELEASES.md	2020-02-24 13:37:21 -08:00
andyh2	98c8888cf7	apk: Fix permission to read /sdcard/	2020-02-20 19:40:57 -05:00
ZwX1616	c534346d70	AF: improve general responsiveness (#1137 ) * sync control with readout; always assume worst * faster recover	2020-02-20 13:41:49 -08:00
Willem Melching	4bf377cfef	apk: revise offroad drive rating images	2020-02-19 10:39:33 -08:00
Vehicle Researcher	332cb82886	openpilot v0.7.3 release	2020-02-17 18:12:52 -08:00
Vehicle Researcher	ab3557e107	Squashed 'opendbc/' changes from d68f8ff0c..2ae0327ea 2ae0327ea GitHub actions (#217) fbbba94aa GM: use common gear VALs dacd8b460 Chrysler commonize gear VALs d338b9fba Add support for 2019 Civic Sedan Diesel. Split GAS_PEDAL_2 out to each car. (#215) git-subtree-dir: opendbc git-subtree-split: 2ae0327ea25db36227d52acfaae8927a59d4e5a3	2020-02-17 18:12:46 -08:00
Vehicle Researcher	b3e67e28e2	Merge opendbc subtree	2020-02-17 18:12:46 -08:00
Vehicle Researcher	6b8726ef75	Squashed 'panda/' changes from 73a60d5c9..769ade051 769ade051 Harness orientation designation fixes (#435) eb5020b7a Add the ability to communicate with BSM (#433) git-subtree-dir: panda git-subtree-split: 769ade0511483c4ba6e4e9a3b5380ffe50d01f13	2020-02-17 18:12:45 -08:00
Vehicle Researcher	2924e495ce	Merge panda subtree	2020-02-17 18:12:45 -08:00
Vehicle Researcher	1d7d11f5dd	Squashed 'cereal/' changes from ab32956aa..eba4349b9 eba4349b9 put liveLocation in qlogs 6c4735f21 add fixed fingerprintSource 4c50d26c6 GitHub actions (#25) 988783f6a Merge pull request #28 from commaai/power_monitoring b43fd0673 Added offroad power usage git-subtree-dir: cereal git-subtree-split: eba4349b9ac2c15a17f7169e6c24464501308347	2020-02-17 18:12:44 -08:00
Vehicle Researcher	a47feb0817	Merge cereal subtree	2020-02-17 18:12:44 -08:00
Willem Melching	dc61915529	Improved driver monitoring model	2020-02-13 18:33:40 -08:00