Merge pull request #103 from wer5lcy/0.8.8

Re-tune DP Accel Profile
Re-tune Accel Profile
2026-06-12 18:34:25 +08:00 · 2021-09-22 07:53:51 -07:00 · 2021-09-22 16:21:34 +08:00 · 2021-09-11 06:43:38 -07:00
316 changed files with 18596 additions and 8878 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -41,8 +41,6 @@ selfdrive/boardd/boardd
 selfdrive/logcatd/logcatd
 selfdrive/mapd/default_speeds_by_region.json
 selfdrive/proclogd/proclogd
-selfdrive/ui/_ui
-selfdrive/ui/_soundd
 selfdrive/test/longitudinal_maneuvers/out
 selfdrive/visiond/visiond
 selfdrive/loggerd/loggerd
--- a/CHANGELOGS-DEV.md
+++ b/CHANGELOGS-DEV.md
@@ -0,0 +1,730 @@
+dragonpilot 0.8.8-2
+========================
+* ADDED: newer faster and modularized mapd and slow down for curve. (Thanks to @move-fast)
+* ADDED: Street name on the bottom bar.
+* ADDED: Now supports 1+3t / C2 / C3 / Jetson Xavier NX.
+* ADDED: Smoother tune for PRIUS_TSS2.
+* Bug fixes.
+
+dragonpilot 0.8.8-1
+========================
+** BETA TESTING ONLY **
+* Based on openpilot 0.8.8 devel.
+* FIXED: dashcam issue.
+* FIXED: some VW vehicles issue. (Thanks to @yayism)
+* FIXED: white panda + j533 acc issue. (Thanks to @lirudy)
+* ADDED: Auto fake black panda.
+* ADDED: 2018 chinese camry hybrid fingerprint (Thanks to @stingshen)
+* WIP: mapd.
+
+dragonpilot 0.8.7-4
+========================
+* 2017 JADE w/ Added Comma Pedal Support. (Thanks to @lijunhao731)
+* Fixed toyota / honda brake light display. (Thanks to @loveloveses)
+* Fixed UI toggle. (Thanks to @鄧育林、@謝聖鴻)
+* Fixed VW resume/display issue. (Thanks to @SKY)
+* Fixed CJK font installation issue.
+
+dragonpilot 0.8.7-3
+========================
+* Bug fixes.
+* Fixed gpxd.
+* Added some Chinese support.
+
+dragonpilot 0.8.7-2
+========================
+* Fixed sound issue.
+* Changed gpx logs to OSM compatible format.
+* HONDA: Added BSM support for CRV-Hybrid.
+* HONDA: Added toggle to force displaying km/h in HUD.
+* TOYOTA: Add new Toggles under DP - Cars to enable/disable Following Modes / Accel Modes with physical button feature.
+
+dragonpilot 0.8.7-1
+========================
+* Based on openpilot 0.8.7 devel.
+* Support 1+3t / C2 / Jetson Xavier NX.
+* Support White / Grey Panda.
+* TOYOTA: Can now change Following Modes with physical button from the steering wheel.
+* TOYOTA: Can now change Acceleration Modes with physical button if your car supports it.
+* TOYOTA: Added Low speed override toggles.
+* Dev UI now displays RPM reading.
+* Added Prebuilt toggle for faster boot.
+* Lexus RX high RPM fix. (Thanks to @crazysim).
+* Added toggle to launch Language settings.
+* Added toggle to launch Volume settings.
+* Added toggle to launch date/time settings.
+* Added toggle to flash panda.
+* Added toggle to recover panda firmware.
+* Added toggle to delete logging (/sdcard/realdata).
+* Added GPS Logger.
+
+dragonpilot 0.8.6-1
+========================
+* Based on openpilot 0.8.6 devel.
+* Support 1+3t / C2 / Jetson Xavier NX.
+* Support White / Grey Panda.
+
+dragonpilot 0.8.5-4
+========================
+* Added multiple toggles.
+* Code clean up.
+* Android app support. (see selfdrive/dragonpilot/HOWTO-APPD.md)
+* Better support for VW MPQ (Thanks to @Saber)
+
+dragonpilot 0.8.5-3
+========================
+* Added Jetson support toggle.
+* Added Steering Ratio controller.
+* Reduce Following Profile to 3 modes only. (1.8s / 1.5s / 1.2s)
+* Bug fixes.
+
+dragonpilot 0.8.5-2
+========================
+* Added black panda simulation toggle.
+* Added No GPS toggle.
+* Added No Battery Toggle.
+* Bug fixes.
+
+dragonpilot 0.8.5-1
+========================
+* Based on openpilot 0.8.5 devel.
+* 基於 openpilot 0.8.5 devel.
+* Support 1+3t / C2 / Jetson Xavier NX.
+* 支持 1+3t / C2 / Jetson Xavier NX.
+* No White/Grey Panda Support.
+* 不支持白灰熊.
+
+dragonpilot 0.8.4-3
+========================
+* 簡化 1+3t 安裝方法. (請查閱 HOWTO-ONEPLUS.md)
+* Simplied 1+3t installation. (See HOWTO-ONEPLUS.md)
+* 加回舊 ssh 登錄.
+* Good old ssh key.
+* 修復本田錯誤. (感謝 @loveloveses)
+* Fixed Honda bug. (Thanks to @loveloveses)
+
+dragonpilot 0.8.4-2
+========================
+* 加回可調整加速/跟車設定.
+* Added back Accel/Following Profile.
+* 支持 Headless Jetson Xavier NX (https://github.com/efinilan/xnxpilot.git)
+* Support Headless Jetson Xavier NX (https://github.com/efinilan/xnxpilot.git)
+* 支持 1+3t (需額外安裝手續)
+* Support 1+3t (Require additional install procedure)
+* 支持白/灰熊
+* Support White/Grey Panda.
+
+dragonpilot 0.8.4-1
+========================
+* 基於 openpilot 0.8.4 devel.
+* Based on openpilot 0.8.4 devel.
+
+dragonpilot 0.8.1
+========================
+* 基於最新 openpilot 0.8.1 devel.
+* Based on latest openpilot 0.8.1 devel.
+* 加入行車記錄按鈕。(感謝 @toyboxZ 提供)
+* Added REC screen button. (Thanks to @toyboxZ)
+
+dragonpilot 0.8.0
+========================
+* 基於最新 openpilot 0.8.0 devel.
+* Based on latest openpilot 0.8.0 devel.
+* 加入 git 錯誤修正。(感謝 @toyboxZ 提供)
+* Added git error fix. (Thanks to @toyboxZ)
+
+dragonpilot 0.7.10.1
+========================
+* HYUNDAI_GENESIS 使用 INDI 控制器。(感謝 @donfyffe 提供)
+* HYUNDAI_GENESIS uses INDI controller. (Thanks to @donfyffe)
+* HYUNDAI_GENESIS 加入 Cruise 按紐 和 lkMode 支援。(感謝 @donfyffe 建議)
+* HYUNDAI_GENESIS added Cruise button event and lkMode feature. (Thanks to @donfyffe)
+* 支援台灣版 2018 Huyndai IONIQ + smart MDPS (dp_hkg_smart_mdps) (感謝 @andy741217 提供)
+* Support 2018 Taiwan Hyundai IONIQ + smart MDPS (dp_hkg_smart_mdps) (Thanks to @andy741217)
+* 使用 openpilot v0.8 的模型。(感謝 @eisenheim)
+* Use openpilot v0.8 model. (Thanks to @eisenheim)
+* 加入 0.8 測試版的部分優化。
+* Added optimizations from pre-0.8.
+* 加入 dp_honda_eps_mod 設定來使用更高的扭力 (需 eps mod)。(感謝 @Wuxl_369 提供)
+* Added dp_honda_eps_mod setting to enable higher torque (eps mod required). (Thanks to @Wuxl_369)
+* 修正 VW 對白/灰熊的支援 (感謝 @lirudy 提供)
+* Fixed issue with white/grey panda support for VW (Thanks to @lirudy)
+* GENESIS_G70 優化 (感謝 @sebastian4k 提供)
+* GENESIS_G70 Optimisation (Thanks to @sebastian4k)
+* HYUNDAI_GENESIS 優化 (感謝 @donfyffe 提供)
+* HYUNDAI_GENESIS Optimisation (Thanks to @donfyffe)
+* 加入 Dynamic gas Lite。(感謝 @toyboxZ 提供)
+* Added Dynamic Gas Lite. (Thanks to @toyboxZ)
+* 加入來自 afa 的 Honda inspire, accord, crv SnG 優化。(感謝 @menwenliang 提供)
+* Added Honda inspire, accord, crv SnG optimisation from afa fork. (Thanks to @menwenliang)
+* 加入 dp_toyota_lowest_cruise_override_vego。(感謝 @toyboxZ 提供)
+* Added dp_toyota_lowest_cruise_override_vego. (Thanks to @toyboxZ)
+
+dragonpilot 0.7.10.0
+========================
+* 基於最新 openpilot 0.7.10 devel.
+* Based on latest openpilot 0.7.10 devel.
+* 修正 Prius 特定情況下無法操控方向盤的問題。
+* Fixed unable to regain Prius steering control under certain condition.
+* 更新 VW MQB 的支援。(需執行 scripts/vw.sh 腳本)
+* Updated support of VW MQB. (scripts/vw.sh script required)
+* 新增 2018 China Toyota CHR 指紋v2。（感謝 @xiaohongcheung 提供)
+* Added 2018 China Toyota CHR FPv2. (Thanks to @xiaohongcheung)
+* 加入 Headunit Reloaded Android Auto App 支援。(感謝 @Ninjaa 提供)
+* Added Headunit Reloaded Android Auto App Support. (Thanks to @Ninjaa)
+* 優化 nanovg。(感謝 @piggy 提供)
+* Optomized nanovg. (Thanks to @piggy)
+* 加入 complete_setup.sh (感謝 @深鲸希西 提供)
+* Added complete_setup.sh (Thanks to @深鲸希西)
+* Based on latest openpilot 0.7.10 devel.
+* 修正 EON 接 PC/USB 充電器時仍會自動關機的錯誤。(感謝 @小愛 回報)
+* Fixed auto shutdown issue when EON connect to PC/USB Charger. (Thanks to @LOVEChen)
+* HYUNDAI_GENESIS 使用 INDI 控制器。(感謝 @donfyffe 提供)
+* HYUNDAI_GENESIS uses INDI controller. (Thanks to @donfyffe)
+
+dragonpilot 0.7.8.3
+========================
+* VW 加入 6 分鐘時間方向盤控制限制輔助方案。(特別感謝 @actuallylemoncurd 提供代碼)
+* VW added 6 minutes timebomb assist. (dp_timebomb_assist, special thanks to @actuallylemoncurd)
+
+dragonpilot 0.7.8.2
+========================
+* 修正在沒網路的情況下，開機超過五分鐘的問題。
+* Fixed 5+ minutes boot time issue when there is no internet connection.
+* 錯誤回傳改使用 dp 的主機。
+* Used dp server for error reporting.
+* 更新服務改使用 gitee 的 IP 檢查連線狀態。
+* updated service uses gitee IP address instead.
+
+dragonpilot 0.7.8.1
+========================
+* 加入 ko-KR 翻譯。
+* Added ko-KR translation.
+* 加入 Honda Jade 支援。(感謝 @李俊灝)
+* Added Honda Jade support. (Thanks to @lijunhao731)
+* 修正 ui.cc 內存越界的問題。(感謝 @piggy 提供)
+* Fixed ui.cc memory out of bound issue. (Thanks to @piggy)
+* gpxd 記錄改自動存成 zip 格式。
+* gpxd now store in zip format.
+* 強制關閉 panda 檢查 DOS 硬體。
+* Force disabled DOS hardware check in panda.
+
+dragonpilot 0.7.8.0
+========================
+* 基於最新 openpilot 0.7.8 devel.
+* Based on latest openpilot 0.7.8 devel.
+* 加入重置 DP 設定按鈕。(感謝 @LOVEChen 建議)
+* Added "Reset DP Settings" button. (Thanks to @LOVEChen)
+* 將警示訊息更改為類似於概念 UI 的設計。
+* Alert messages changed to concept UI alike design.
+* 當 manager 出現錯誤後，按 Exit 按鈕會執行 reset_update 腳本。
+* Added ability to execute reset_update.sh when press "Exit" button once manager returned errors.
+
+dragonpilot 0.7.7.3
+========================
+* 修正方向盤監控。
+* Fixed steering monitor timer param.
+* 修正行駛時關閉畫面導致當機的錯誤。(感謝 @salmankhan, @stevej99, @bobbydough 回報)
+* Fixed screen frozen issue when "screen off while driving" toggle is enabled. (Thanks to @salmankhan, @stevej99, @bobbydough)
+* 加回 Dev Mini UI 開關。(感謝 @Ninjaa 建議)
+* Re-added Dev Mini UI. (Thanks to @Ninjaa)
+* 新增 (dp_reset_live_parameters_on_start) 每次發車重設 LiveParameters 值。(感謝 @eisenheim)
+* Added ability (dp_reset_live_param_on_start) to reset LiveParameters on each start. (Thanks @eisenheim)
+* 修正同時開啟 dp_toyota_zss 和 dp_lqr 產生的錯誤。(感謝 @bobbydough)
+* Fixed error cuased by enabling both dp_toyota_zss and dp_lqr at the same time. (Thanks to @bobbydough)
+* 新增 (dp_gpxd) 將 GPS 軌跡導出至 GPX 格式 (/sdcard/gpx_logs/）的功能。 （感謝 @mageymoo1）
+* Added ability (dp_gpxd) to export GPS track into GPX files (/sdcard/gpx_logs/). (Thanks to @mageymoo1)
+* 使用德國的車道寬度估算值。 （感謝 @arne182）
+* Used lane width estimate value from Germany. (Thanks to @arne182)
+
+dragonpilot 0.7.7.2
+========================
+* 加入 d_poly offset。 (感謝 @ShaneSmiskol)
+* Added d_poly offset. (Thanks to @ShaneSmiskol)
+* 加入 ZSS 支援。(感謝 @bobbydough, @WilliamPrius 建議, @bobbydough 測試)
+* Added ZSS support. (Thanks to @bobbydough, @WilliamPrius for recommendation, @bobbydough for testing)
+* 加入錯誤記錄至 /sdcard/crash_logs/ (感謝 @ShaneSmiskol 提供代碼)
+* Added error logs to /sdcard/crash_logs/ (Special Thanks to @ShaneSmiskol)
+* 加入 LQR 控制器開關進設定畫面。
+* Added LQR Controller toggle to settings.
+
+dragonpilot 0.7.7.1
+========================
+* 加入 C2 風扇靜音模式。(感謝 @dingliangxue)
+* Added C2 quiet fan mode. (Thanks to @dingliangxue)
+* 加入「輔助換道最低啟動速度」、「自動換道最低啟動速度」設定。
+* Added "Assisted Lane Change Min Engage Speed" and "Auto Lane Change Min Engage Speed" settings.
+* 加入回調校介面。(感謝 @Kent)
+* Re-added Dev UI. (Thanks to @Kent)
+* 加入 "dp_lqr" 設定來強制使用 RAV4 的 lqr 調校。(感謝 @eisenheim)
+* Added "dp_lqr" setting to force enable lqr tuning from RAV4. (Thanks to eisenheim)
+
+dragonpilot 0.7.7.0
+========================
+* 基於最新 openpilot 0.7.7 devel.
+* Based on latest openpilot 0.7.7 devel.
+* 當 Manager 出現錯誤時，顯示 IP 位置。(感謝 @dingliangxue)
+* When Manager failed, display IP address. (Thanks to  @dingliangxue)
+* 加回 sr learner 開關。
+* Re-added sr learner toggle.
+* 加回 加速模式 開關。
+* Re-added Accel Profile toggle.
+* Toyota 加入改寫最低巡航速度功能。(感謝 @Mojo)
+* Added Toyota to override lowerest cruise speed. (Thanks to @Mojo)
+* 介面加入盲點偵測顯示。(感謝 @wabes)
+* Added BSM indicator to UI. (Thanks to @wabes)
+* 加回彎道減速功能。(感謝 @Mojo)
+* re-added Slow On Curve functionality. (Thanks to @Mojo)
+
+dragonpilot 0.7.6.2
+========================
+* 修正無法正確關閉駕駛監控的問題。
+* Fixed unable to properly turn off driver monitor issue.
+
+dragonpilot 0.7.6.1
+========================
+* 基於最新 openpilot 0.7.6.1 devel.
+* Based on latest openpilot 0.7.6.1 devel.
+* 優化並整合 dp 服務。 (所有的設定檔已改名，請重新設定所有的功能)
+* Optimized and integrated several dp services. (Settings have been renamed, please re-config all settings)
+* 完全關閉 steer ratio learner。
+* Completely disabled steer ratio learner.
+* 移除「加速模式」。
+* Removed Accel Profile.
+* 加入本田皓影混電版指紋v1。(感謝 @劉駿)
+* Added Honda Breeze Hybrid FPv1. (Thanks to @劉駿)
+* 加入台灣版 Toyota Prius 4.5 指紋v1。(感謝 @jeekid)
+* Added Taiwan Toyota Prius 4.5 FPv1. (Thanks to @jeekid)
+
+dragonpilot 0.7.5.4
+========================
+* Dynamic Follow 更新模型。(感謝 @ShaneSmiskol 提供代碼、 @cgw1968 測試)
+* Updated Dynamic Follow model. (Special Thanks to @ShaneSmiskol for the feature and @cgw1968 for testing)
+
+dragonpilot 0.7.5.3
+========================
+* Dynamic Follow 更新至 ShaneSmiskol:stock_additions 0.7.5 版。(感謝 @ShaneSmiskol 提供代碼、 @Wei 測試)
+* Updated Dynamic Follow to ShaneSmiskol:stock_additions 0.7.5. (Special Thanks to @ShaneSmiskol for the feature and @Wei for testing)
+* 優化 Lexus GSH 轉向。(感謝 @簡銘佑 測試)
+* Optimize Lexus GSH steering. (Thanks to @簡銘佑)
+* C2 支援自動關機「DragonAutoShutdownAt」參數。(感謝 @cgw1968 建議)
+* C2 to support auto shutdown "DragonAutoShutDownAt" param. (Thanks to @cgw1968)
+* 修正出現「pedalPressed」的錯誤。(感謝 @Wei 回報)
+* Fixed issue showing "pedalPressed" error. (Thanks to @Wei)
+* 將剎車狀熊顯示於 dp 資訊欄。
+* Added brake indicator to dp infobar.
+* 修正「溫度監控」燈示。
+* Fixed "Temp monitor" indicator.
+* 加入「方向燈取消控制」延遲控制設。(感謝 @wabes 建議)
+* Added delay config to "Disable Lat Control on Blinker". (Thanks to @wabes)
+* 加入巴西版 2020 Corolla Hybrid 指紋v2。(感謝 @berno22 提供)
+* Added Brazil 2020 Corolla Hybrid FPv2. (Thanks to @berno22)
+
+dragonpilot 0.7.5.2
+========================
+* 加入對 VW MQB/PQ 的支援。(感謝 @dingliangxue 移植)
+* Added support to VW MQB/PQ platform. (Thanks to @dingliangxue)
+* 修改成 3 小時後停止供電。(感謝 @Wei 建議)
+* Updated to stop charging after 3 hrs. (Thanks to @Wei)
+* 移除行車記錄下的「碰撞偵測」功能。
+* Removed Impact Detection in Dashcam.
+* 修正開啟「Noctua 風扇」模式導致的錯誤。(感謝 @阿濤 回報)
+* Fixed a bug caused by enabling "Noctua Mod". (Thanks to @阿濤)
+* 修正「位智模式」無法顯示警示的問題。(感謝 @axandres 回報)
+* Fixed alert issue in waze mode. (Thanks to @axandres)
+* 修正無法顯示更新中圖示的問題。
+* Fixed unable to display "UPDATING" icon issue.
+* 加入「允許多次自動換道」功能。(感謝 @阿濤 建議)
+* Added "Allow Continuous Auto Lane Change" Toggle. (Thanks to @阿濤)
+* 修正開機後設定頁面有時會錯誤的問題。(感謝 @salmankhan、@Wei 回報)
+* Fixed setting page crash issue. (Thanks to @salmankhan, @Wei)
+* 修正熄火後一直出現更新訊息的錯誤。(感謝 @Sky Chang 回報)
+* Fixed issue that keep showing update prompt. (Thanks to @Sky Chang)
+
+dragonpilot 0.7.5.1
+========================
+* 修正因同時使用「社群功能」和「自定車型」造成的加減速問題。(特別感謝 @Wei、@Sky Chang、@Han9365、@鄧育林 的測試以及回報。)
+* Fixed acceleration issue caused by used of both "Community Maintain Feature" and "Custom Car Model". (Special Thanks to @Wei, @Sky Chang, @Han9365, @鄧育林)
+* 新增 DragonMaxSpeedLimit 設定值 (mph)，當如果車速高於此值 op 將會停止操控。(感謝 @Anthony 建議)
+* Added DragonMaxSpeedLimit parameter (mph), op will stop controlling when car speed is high than the value. (Thanks to @Anthony)
+* 更新 appd 使用 cnpmjs 來下載 APKs。
+* Updated appd to use cnpmjs to download APKs.
+* 修正更新服務。(感謝 @Wei)
+* Fixed Update Service. (Thanks to @Wei)
+* 新增加拿大版 2018 Toyota Sienna LTD 指紋(v2)。(感謝 明峰 提供)
+* Added Canada 2018 Toyota Sienna LTD fingerprint (v2). (Thanks to 明峰)
+* 新增「通過移動網路上傳」開關
+* Added Upload Over Mobile Network toggle.
+* 新增「通過熱點上傳」開關
+* Added Upload Over Hotspot toggle.
+* 新增加拿大版 2018 Toyota Sienna LTD 指紋(v1)。(感謝 明峰 提供)
+* Added Canada 2018 Toyota Sienna LTD fingerprint (v1). (Thanks to 明峰)
+* 新增大陸版 Volkswagen Golf GTI 指紋 (v1)。(感謝 easyeiji 提供)
+* Added China Volkswagen Golf GTI fingerprint (v1). (Thanks to easyeiji)
+
+dragonpilot 0.7.5.0
+========================
+* 基於最新 openpilot 0.7.5 devel-staging.
+* Based on latest openpilot 0.7.5 devel-staging.
+* 更新 dp 圖示 (特別感謝 @wabes 的設計與提供)。
+* Updated dp logo, special thanks to @wabes for the design.
+* 簡/繁中文版和 i18n 整合成為單一版本。  
+* Merged zhs/zht/i18n versions into one.
+* 新增大陸版 CAMRY HYBRID 指紋v2。(感謝 @杜子腾)
+* Added China Camery Hybrid FPv2. (Thanks to @杜子腾)
+* 新增台灣版 Altis HYBRID 指紋v1。(感謝 @Fish)
+* Added Taiwan Altis Hybrid FPv1. (Thanks to @Fish)
+* 新增行駛時關閉畫面功能。
+* Added Screen off while driving feature.
+* 新增倒車時關閉畫面功能。
+* Added Screen off while reversing feature.
+* 新增駕駛介面加入「加速模式」切換鈕。
+* Added acceleration profile toggle onto driving UI.
+* 新增自定車型功能，取代指紋暫存功能。
+* Replaced fingerprint cache with custom car model selector.
+* 新增可調亮度。
+* Added Brightness changer.
+* 新增部分德語支持。(特別感謝 @arne182 提供)
+* Added partial de_DE language support (Thanks to @arne182)
+* 新增停車碰撞偵測記錄功能。
+* Added off road impact detection to dashcam.
+
+2020-05-06
+========================
+* 更新 dp 圖示 (特別感謝 @wabes 的設計與提供)。
+* 中文版整合進 i18n 版。  
+* 刪除指紋暫存功能。
+* 新增 CAMERY HIBRID 指紋。(感謝 @杜子腾)
+* 新增行駛時關閉畫面功能。
+* 新增倒車時關閉畫面功能。
+* 新增駕駛介面加入「加速模式」切換鈕。
+* 新增自定義車型。
+
+2020-04-16
+========================
+* [DEVEL] 加入台灣版 2016 Lexus IS200t 指紋。(感謝 Philip / Cody Dai)
+* [DEVEL] 加入台灣版 2016 Toyota Prius 4.5 代指紋。(感謝 Philip)
+* [DEVEL] 加入台灣版 201x Toyota RAV4 4WD 指紋。(感謝 Philip)
+* [DEVEL] 加入台灣版 2020 Toyota Auris w/ LTA 指紋。(感謝 Philip)
+* [DEVEL] 修正 commIssue 錯誤。(感謝 Kent 協助)
+
+2020-04-13
+========================
+* [DEVEL] 加入可調整 Toyota Sng 起步反應值 (DragonToyotaSngResponse)。 (特別感謝 @Wei 提供 PR)
+* [DEVEL] 駕駛介面加入「動態調整車距」按鈕。(感謝 @cgw1968-5779 建議)
+* [DEVEL] 更新 update script。(感謝 深鯨希西 回報)
+
+2020-04-10
+========================
+* [DEVEL] 更新 panda 至最新的 comma:master 分支。
+* [DEVEL] 移除所有的第三方應用改為自動下載。
+* [DEVEL] 移除「啟用原廠 DSU 模式」、「安全帶檢查」、「車門檢查」開關。
+
+2020-03-31
+========================
+* [DEVEL] 更新至 2020-03-31 testing 分支。
+
+2020-03-27
+========================
+* [DEVEL] 更新至最新的 testing 分支:
+  * 加入波蘭版 2015 Lexus NX200T 支援。(感謝 wabes 提供)
+  * 調整「啟用原廠 DSU 模式」為不再需要 AHB 。(Enable Stock DSU Mode no longer requires "AHB" toggle)
+  * 加入「安全帶檢查」、「車門檢查」、「檔位檢查」、「溫度檢查」開關。
+  * 加入曲率學習功能 - Curvature Learner 。(感謝 zorrobyte 提供)
+  * 加入大陸版 2018 Toyota Highlander 支援。(感謝 toyboxZ 提供)
+  * 加入大陸版 2018 Toyota Camry 2.0 支援。(感謝 Rming 提供)
+  * 加入韓文支持。(感謝 crwusiz 提供)
+  * 調整 OFFROAD 主頁翻譯將 "dragonpilot" 改回 "openpilot"。
+
+2020-03-22
+========================
+* [DEVEL] 更新至最新的 testing 分支。
+
+2020-03-17
+========================
+* [DEVEL] 更新至最新的 testing 分支 (commaai:devel-staging 0.7.4)。
+* [DEVEL] 加入動態調整車距功能。(特別感謝 @ShaneSmiskol 提供 PR)
+
+2020-03-14
+========================
+* [DEVEL] 更新 pt-Br (葡萄牙語) 翻譯。(感謝 berno22 提供)
+* [DEVEL] 加入自動關機開關。(感謝 Rzxd 建議)
+* [DEVEL] 調高 Toyota 扭力容錯值。
+* [DEVEL] 優化讀取 dp 設定值。
+* [DEVEL] 加入 2019 手動 Civic 指紋。感謝 (AlexNoop 提供)
+* [DEVEL] dp 功能加入對 Subaru 車系的支援。
+
+2020-03-06
+========================
+* [DEVEL] 加入葡萄牙語支持。(感謝 berno22 提供)
+* [DEVEL] 加入大陸 2018 Camry、2020 RAV4 指紋。(感謝 笨木匠 提供)
+* [DEVEL] 建立 devel-i18n 取代 devel-en。
+* [DEVEL] devel-en is deprecated, please switch to devel-i18n instead.
+
+2020-03-04
+========================
+* [DEVEL] 加入顯示駕駛監控畫面。
+* [DEVEL] 加入加速模式選項。(特別感謝 @arne182, @cgw1968-5779 提供 PR)
+* [DEVEL] 修正 shutdownd 在 comma two 可能會不正常關機的錯誤。(感謝 @Wei, @Rzxd 回報)
+
+2020-02-25
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.3)。
+
+2020-02-21
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.3)。
+
+2020-02-14
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.2)。
+* [DEVEL] 修正錯誤。
+
+2020-02-08
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.2)。
+* [DEVEL] dp 功能加入對現代 (Hyundai) 車系的支援。
+* [DEVEL] 加入神盾測速照相自動啟動的開關。
+* [DEVEL] 更新高德地圖至 v4.5.0.600053。
+* [DEVEL] 使用 0.6.6 版的更新系統。
+* [DEVEL] 修正急剎問題。(感謝 kumar 提供)
+
+2020-01-31
+========================
+* [DEVEL] 移除行車介面電量、溫度顯示，(修正畫面當機、黑屏問題)
+
+2020-01-29
+========================
+* [DEVEL] 修正行車介面錯誤。(感謝 深鲸希西 測試；eisenheim、HeatNation 反應)
+
+2020-01-23
+========================
+* [DEVEL] 加入 Steer Ratio Learner 關閉。(感謝 eisenheim 建議)
+* [DEVEL] 行車介面加入電量、溫度。(感謝 eisenheim 建議)
+* [DEVEL] 優化 appd。
+
+2020-01-19
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.1)。
+* [DEVEL] 調整 appd 和 ALC 邏輯。
+
+2020-01-14
+========================
+* [DEVEL] 加入開機啟動個人熱點。(感謝 eisenheim 建議)
+
+2020-01-08
+========================
+* [DEVEL] 加入大陸版 2018 Lexus RX300 支援。(感謝 cafe 提供)
+* [DEVEL] 加入 DragonBTG 設定。(感謝 CloudJ、低調哥、歐姓Altis車主 提供)
+
+2019-12-31
+========================
+* [DEVEL-ZHS] 加回第三方應用。
+
+2019-12-29
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.0)。
+* [DEVEL] 輔助/自動變道改為可調整參數 (進階用戶)。(DragonAssistedLCMinMPH、DragonAutoLCMinMPH、DragonAutoLCDelay)
+* [DEVEL-ZHS] 修正無法運行第三方應用錯誤。(感謝 深鲸希西 反應)
+
+2019-12-18
+========================
+* [DEVEL] 修正自動換道邏輯。
+* [DEVEL] 更新 offroad 翻譯。
+* [DEVEL] 錯誤修正。
+* [DEVEL] 移除美版 2017 Civic Hatchback 指紋。(與其它車型衝突)
+
+2019-12-17
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.7.0)。
+* [DEVEL] 加入輔助換道開關。（24mph / 40kph 以上)
+* [DEVEL] 加入自動換道開關。（40mph / 65kph 以上)
+* [DEVEL] 加入大陸版 2019 雷凌汽油版指紋。 (感謝 Shell 提供)
+* [DEVEL] 加入大陸版 2019 卡羅拉汽油版指紋。 (感謝 Shell 提供)
+* [DEVEL] 加入美版 2017 Civic Hatchback 指紋。(感謝 CFranHonda 提供)
+
+2019-12-10
+========================
+* [DEVEL] 加入位智車機模式。 (Waze Mode)
+
+2019-11-21
+========================
+* [DEVEL] 修正 offroad 翻譯。(感謝 鄧育林 回報)
+* [DEVEL] 調整前車靜止移動偵測參數。
+* [DEVEL] 前車靜止移動偵測可在未啟用 dp 時運作。
+
+2019-11-18
+========================
+* [DEVEL] 修正 offroad 翻譯。(感謝 Cody、鄧育林 回報)
+
+2019-11-18
+========================
+* [DEVEL] 修正 frame 翻譯。
+
+2019-11-15
+========================
+* [DEVEL] 修正不會充電的錯誤。 (感謝 袁昊 反應)
+
+2019-11-15
+========================
+* [DEVEL] 修正充電控制。 (感謝 KT 反應)
+* [DEVEL] 更新 frame 翻譯，改為多語言版。 (感謝 深鲸希西、shaoching885、鄧育林 反應)
+* [DEVEL] 更新至最新的 commaai:devel (0.6.6)。
+
+2019-11-12
+========================
+* [DEVEL] 只顯示電量文字 (注意：有時不會更新，需要拔插 USB 線)
+* [DEVEL] 自動偵測並鎖定硬體 (EON / UNO)。
+
+2019-11-12
+========================
+* [DEVEL] 加入鎖定硬體 (EON / UNO) 的程式碼。
+
+2019-11-11
+========================
+* [DEVEL] 更新高德地圖至 v4.3.0.600310 R2098NSLAE
+* [DEVEL] 更新 MiXplorer 至 v6.40.3
+* [DEVEL] 更新至最新的 commaai:devel (0.6.6)。
+* [DEVEL] 前車靜止移動偵測加入偵測警示。
+
+2019-11-07
+========================
+* [DEVEL] 讓 Bosch 系統顯示三角。 (感謝 ching885 回報)
+* [DEVEL] 更新 offroad 多語言版簡體中文翻譯 (感謝 Rming 提供)
+
+2019-11-06
+========================
+* [DEVEL] 修正 0.6.6 appd 和 dashcamd 錯誤。 (感謝 鄧育林 回報)
+* [DEVEL] 更新至最新的 commaai:devel (0.6.6)。
+
+2019-11-05
+========================
+* [DEVEL] 加入台灣 Lexus 2017 GS450h 支援。 (感謝 簡銘佑 提供指紋)
+
+2019-11-01
+========================
+* [DEVEL] 新增神盾測速照相。 (感謝 Sky Chang 和 Wei Yi Chen)
+* [DEVEL] 修正 offroad 翻譯。 (感謝 Leo Hsieh)
+
+2019-11-01
+========================
+* [DEVEL] 移除 Miui 字型，縮小 dp 使用空間。
+* [DEVEL] 更新 offroad 為多語言版
+* [DEVEL] 更新至最新的 commaai:devel (0.6.5)。
+
+2019-10-29
+========================
+* [DEVEL] 加入 SnG 補丁。（感謝 楊雅智)
+
+2019-10-28
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.6.5)。
+* [DEVEL] 調整 dragon_allow_gas 邏輯 (請回報任何問題，需更新 Panda 韌體)
+
+2019-10-18
+========================
+* [DEVEL] 加入前車靜止移動偵測。(測試版，感謝 ucolchen)
+* [DEVEL] 移除強迫網路連線提示。(感謝 Shell)
+* [DEVEL] 修正 allow_gas 功能。
+
+2019-10-18
+========================
+* [DEVEL] 加入彎道減速功能開關。
+* [DEVEL] 強迫使用 dp 版 Panda 韌體。
+* [DEVEL] 更新至最新的 commaai:devel (0.6.5)。
+
+2019-10-17
+========================
+* [DEVEL] 加入「車型」顯示於 dp 設定畫面。
+* [DEVEL] 修正充電控制讀取預設值的錯誤。
+* [DEVEL] 修正無法顯示更新記錄的錯誤。
+
+2019-10-16
+========================
+* [DEVEL] 刷新 Panda 韌體按鈕將會自動重啟 EON。(感謝 鄧育林 建議)
+* [DEVEL] 下載更新記錄時使用 "no-cache" 標頭。
+* [DEVEL] 更新高德地圖至 v4.3.0
+* [DEVEL] 刪除 bs (Branch Switcher)
+
+2019-10-14
+========================
+* [DEVEL] 啟用自動更新功能。(感謝 鄧育林 提供)
+* [DEVEL] 清除不再使用的 dp params。
+* [DEVEL] 加入數字電量指示。(感謝 鄧育林 建議)
+* [DEVEL] 加入刷新 Panda 韌體按鈕。
+
+2019-10-11
+========================
+* [DEVEL] 更新至最新的 commaai:devel (0.6.5)。
+* [DEVEL] 加入台灣 2019 RAV4 汽油版指紋。 (感謝 Max Duan / CloudJ 提供)
+
+2019-10-09
+========================
+* [DEVEL] 加入當 LatCtrl 關閉時，畫面顯示提示訊息。
+
+2019-10-08
+========================
+* [DEVEL] 加回駕駛監控開關。
+* [DEVEL] 加入 bs (branch switcher) 程式。
+
+2019-10-07
+========================
+* [DEVEL] 加入台灣版 2019 RAV4H 油電版指紋。(感謝 Max Duan 提供)
+
+2019-10-05
+========================
+* [DEVEL] 移除 curvature learner: 轉角明顯比原廠小。
+* [DEVEL] 更新至最新的 commaai:devel (0.6.4)。
+
+2019-09-30
+========================
+* [DEVEL] 更新 curvature learner 版本至 v4。
+* [DEVEL] Lexus ISH 使用更精確的 EPS Steering Angle Sensor
+
+2019-09-27
+========================
+* [DEVEL] 加入 Zorrobyte 的 curvature learner (https://github.com/zorrobyte/openpilot)
+* [DEVEL] 加入可開關駕駛監控的程式碼。
+* [DEVEL] 取消當 steering 出現錯誤時，自動切斷方向控制 2 秒的機制。
+* [DEVEL] 讓行車介面的「方向盤」/「轉彎」圖示半透明化。
+
+2019-09-26
+========================
+* [DEVEL] 修正當「啟用記錄服務」關閉時，make 會有問題的錯誤。 (感謝 shaoching885 和 afa 回報)
+
+2019-09-24
+========================
+* [DEVEL] 行車介面加入可開關的「前車」、「路線」、「車道」設定。
+* [DEVEL] 行車介面加入可開關的「方向燈號」提示。 (感謝 CloudJ 建議，程式碼來源: https://github.com/kegman/openpilot)
+
+2019-09-23
+========================
+* [DEVEL] 優化讀取 params 的次數。
+* [DEVEL] 加入可開關的車道偏移警示。
+* [DEVEL] 修正充電控制邏輯。
+* [DEVEL] 加入台灣 Prius 4.5 指紋。 (感謝 Lin Hsin Hung 提供)
+
+2019-09-20
+========================
+* [DEVEL] 加入充電控制功能。 (感謝 loveloveses 和 KT 建議)
+
+2019-09-16
+========================
+* [DEVEL] 加入台灣 CT200h 指紋。 (感謝 CloudJ 提供)
+* [DEVEL] 加入美版 CT200h 移植。 (感謝 thomaspich 提供)
+
+2019-09-13
+========================
+* [DEVEL] 行車介面加入可開關的「速度顯示」設定。
+
+2019-09-09
+========================
+* [DEVEL] 加入 GreyPanda 模式。
+
+2019-08-28
+========================
+* [DEVEL] 加入可調警示音量。
+
+2019-08-27
+========================
+* [DEVEL] 自動關機改為可調時長。
--- a/CONTRIBUTORS.md
+++ b/CONTRIBUTORS.md
@@ -0,0 +1,37 @@
+# CONTRIBUTORS
+
+Due to the way we manage the source code, it is not possible to see all the contributors' info, hence we create a list here.
+If you have contributed to DP project before and your name is not listed here, feel free to send us a PR to update this!
+
+### TEAM
+Name                                                         | github                                                       | Role
+------------------------------------------------------------ | ------------------------------------------------------------ | ------------------------------------------------------------
+cafe                                                         | [cafe](https://github.com/coffice12)                         | Resource Provider
+cgw1968                                                      | [cgw1968](https://github.com/cgw1968-5779)                   | C2/C3 Toyota Beta Tester
+kumar                                                        | [rav4kumar](https://github.com/rav4kumar)                    | Release Maintainer
+loveloveses                                                  | [loveloveses](https://github.com/loveloveses)                | Wiki Maintainer
+Rick Lan                                                     | [efinilan](https://github.com/efinilan)                      | Release Maintainer
+Stupefacient                                                 | [Stupefacient](https://github.com/Stupefacient)              | C2/C3 Toyota Beta Tester
+
+### CONTRIBUTORS
+Name                                                         | github                                                      
+------------------------------------------------------------ | ------------------------------------------------------------
+andy741217                                                   | [andy741217](https://github.com/andy741217)                 
+Arne Schwarck                                                | [arne182](https://github.com/arne182)                       
+berno22                                                      | [berno22](https://github.com/berno22)                       
+Bobbydough                                                   | [Bobbydough](https://github.com/bobbydough)
+Curtis Jenkins                                               | [actuallylemoncurd](https://github.com/actuallylemoncurd)   
+DFyffe                                                       | [donfyffe](https://github.com/donfyffe)                     
+dinglx                                                       | [dingliangxue](https://github.com/dingliangxue)             
+eyezenheim                                                   | [eyezenheim](https://github.com/eyezenheim)                 
+kegman                                                       | [kegman](https://github.com/kegman)                         
+lijunhao731                                                  | [lijunhao731](https://github.com/lijunhao731)               
+lirudy                                                       | [lirudy](https://github.com/lirudy)                         
+LOVEChen                                                     | [LOVEChen](https://github.com/LOVEChen)                     
+menwenliang                                                  | [menwenliang](https://github.com/menwenliang)               
+move-fast                                                    | [menwenliang](https://github.com/move-fast)               
+Nelson Chen                                                  | [nelsonjchen](https://github.com/nelsonjchen)
+rming                                                        | [Rming](https://github.com/rming)                           
+sebastian4k                                                  | [sebastian4k](https://github.com/sebastian4k)               
+Shane Smiskol                                                | [sshane](https://github.com/sshane)                         
+toyboxZ                                                      | [toyboxZ](https://github.com/toyboxZ)                       
--- a/HOWTO-ONEPLUS.md
+++ b/HOWTO-ONEPLUS.md
@@ -0,0 +1,25 @@
+How to install on Oneplus 3t?
+------
+1. clone dragonpilot to /data/ and make sure it's named openpilot:
+   (手動安裝切換至 dp)
+```
+cd /data/ && rm -fr openpilot ; git clone https://github.com/dragonpilot-community/dragonpilot.git openpilot -b 0.8.8
+```
+
+2. run command:
+   (在 ssh 畫面下，輸入)
+```
+cd /data/openpilot/scripts/ && ./oneplus_update_neos.sh
+```
+
+3. Let it download and complete it update, after a couple of reboot, your screen will then stay in fastboot mode.
+   (等待下載並讓它重新開機，沒錯誤的話會進入 Android 機器人更新畫面，等自動重新開機)
+
+4. In fastboot mode, select use volume button to select to `Recovery mode` then press power button.
+   (在 fastboot 模式，用音量鍵上下選到 Recovery mode 再按下電源鍵)
+
+5. In Recovery mode, tap `apply update` -> `Choose from emulated` -> `0/` -> `update.zip` -> `Reboot system now`
+   (在 Recovery mode，點選 `apply update` -> `Choose from emulated` -> `0/` -> `update.zip` -> `Reboot system now`)
+   
+6. You should be able to boot into openpilot, if touch screen is not working, try to reboot again.
+   (你現在應該可以進入 openpilot 畫面，如果點擊畫面沒有反應，請再重新開機一次)
--- a/HOWTO-Translate.md
+++ b/HOWTO-Translate.md
@@ -0,0 +1,18 @@
+HOW TO Translate dragonpilot
+--
+
+If you would like to help to translate dragonpilot into your native language, please:
+1. Contact dragonpilot team to generate language files for translation.
+
+2. Start translation, there will be 2 files: (locale = your language code)
+    * <openpilot>/selfdrive/assets/locales/**locale**/LC_MESSAGES/events.po
+      * This is for alerts messages. (e.g. on road warning messages) 
+    * <openpilot>/selfdrive/ui/translations/**locale**.ts
+      * This is for UI. (e.g. settings pages)
+
+   We recommended to use a proper editor such as TextMate (mac) / notepad++ (win) / Intellij pyCharm.
+
+
+3. Submit a PR for your translation.
+
+4. dragonpilot team will review your PR and add it in the next release.
--- a/JETSON.md
+++ b/JETSON.md
@@ -0,0 +1,10 @@
+set_core_affinity 
+------
+Jetson Xavier NX has 6 cores running at 1.9 GHz, here is what I've defined
+
+0 = (not specified)
+1 = plannerd / radard
+2 = boardd
+3 = controlsd
+4 = camerad
+5 = modeld
--- a/29
+++ b/29
@@ -7,6 +7,8 @@ import platform
 import numpy as np

 TICI = os.path.isfile('/TICI')
+JETSON = os.path.isfile('/JETSON')
+
 Decider('MD5-timestamp')

 AddOption('--test',
@@ -65,6 +67,10 @@ if arch == "aarch64" and TICI:

 USE_WEBCAM = os.getenv("USE_WEBCAM") is not None

+USE_MIPI = os.getenv("USE_MIPI") is not None
+if arch == "aarch64" and JETSON:
+  arch = "jarch64"
+
 lenv = {
  "PATH": os.environ['PATH'],
 }
@@ -114,8 +120,19 @@ else:
  cflags = []
  cxxflags = []
  cpppath = []
+  rpath = []

-  if arch == "Darwin":
+  if arch == "jarch64":
+    libpath = [
+      "#phonelibs/libyuv/larch64/lib",
+      "#selfdrive/common",
+      "/usr/lib",
+      "/usr/local/lib",
+    ]
+    cflags = ["-DXNX", "-march=armv8.2-a"]
+    cxxflags = ["-DXNX", "-march=armv8.2-a"]
+    rpath += ["/usr/local/lib"]
+  elif arch == "Darwin":
    yuv_dir = "mac" if real_arch != "arm64" else "mac_arm64"
    libpath = [
      f"#phonelibs/libyuv/{yuv_dir}/lib",
@@ -143,8 +160,9 @@ else:
      "/usr/local/lib",
    ]

-  rpath = [
-    "phonelibs/snpe/x86_64-linux-clang",
+  if arch != "jarch64":
+    rpath += ["phonelibs/snpe/x86_64-linux-clang"]
+  rpath += [
    "cereal",
    "selfdrive/common"
  ]
@@ -313,7 +331,7 @@ else:
  qt_dirs += [f"/usr/include/{real_arch}-linux-gnu/qt5/Qt{m}" for m in qt_modules]

  qt_libs = [f"Qt5{m}" for m in qt_modules]
-  if arch == "larch64":
+  if arch == "larch64" or arch == "jarch64":
    qt_libs += ["GLESv2", "wayland-client"]
  elif arch != "Darwin":
    qt_libs += ["GL"]
@@ -346,7 +364,8 @@ if GetOption("clazy"):
  qt_env['ENV']['CLAZY_IGNORE_DIRS'] = qt_dirs[0]
  qt_env['ENV']['CLAZY_CHECKS'] = ','.join(checks)

-Export('env', 'qt_env', 'arch', 'real_arch', 'SHARED', 'USE_WEBCAM')
+zmq = 'zmq'
+Export('env', 'qt_env', 'arch', 'real_arch', 'SHARED', 'USE_WEBCAM', 'zmq', 'USE_MIPI')

 SConscript(['selfdrive/common/SConscript'])
 Import('_common', '_gpucommon', '_gpu_libs')
--- a/cereal/SConscript
+++ b/cereal/SConscript
@@ -1,4 +1,4 @@
-Import('env', 'envCython', 'arch', 'common')
+Import('env', 'envCython', 'arch', 'common', 'zmq')

 import shutil

@@ -8,7 +8,7 @@ messaging_dir = Dir('messaging')

 # Build cereal

-schema_files = ['log.capnp', 'car.capnp', 'legacy.capnp']
+schema_files = ['log.capnp', 'car.capnp', 'legacy.capnp', 'dp.capnp']
 env.Command(["gen/c/include/c++.capnp.h", "gen/c/include/java.capnp.h"], [], "mkdir -p " + gen_dir.path + "/c/include && touch $TARGETS")
 env.Command([f'gen/cpp/{s}.c++' for s in schema_files] + [f'gen/cpp/{s}.h' for s in schema_files],
            schema_files,
@@ -40,7 +40,14 @@ messaging_objects = env.SharedObject([
 messaging_lib = env.Library('messaging', messaging_objects)
 Depends('messaging/impl_zmq.cc', services_h)

-env.Program('messaging/bridge', ['messaging/bridge.cc'], LIBS=[messaging_lib, 'zmq', common])
+# note, this rebuilds the deps shared, zmq is statically linked to make APK happy
+# TODO: get APK to load system zmq to remove the static link
+if arch == "aarch64":
+  zmq_static = FindFile("libzmq.a", "/usr/lib")
+  shared_lib_shared_lib = [zmq_static, 'm', 'stdc++', "gnustl_shared", "kj", "capnp"]
+  env.SharedLibrary('messaging_shared', messaging_objects, LIBS=shared_lib_shared_lib)
+
+env.Program('messaging/bridge', ['messaging/bridge.cc'], LIBS=[messaging_lib, common, 'zmq'])
 Depends('messaging/bridge.cc', services_h)

 envCython.Program('messaging/messaging_pyx.so', 'messaging/messaging_pyx.pyx', LIBS=envCython["LIBS"]+[messaging_lib, "zmq", common])
--- a/cereal/_SConstruct
+++ b/cereal/_SConstruct
@@ -0,0 +1,73 @@
+import os
+import platform
+import subprocess
+import sysconfig
+
+arch = subprocess.check_output(["uname", "-m"], encoding='utf8').rstrip()
+if platform.system() == "Darwin":
+  arch = "Darwin"
+
+cereal_dir = Dir('.')
+messaging_dir = Dir('./messaging')
+
+cpppath = [
+  cereal_dir,
+  messaging_dir,
+  '/usr/lib/include',
+  '/opt/homebrew/include',
+  sysconfig.get_paths()['include'],
+]
+
+libpath = [
+  '/opt/homebrew/lib',
+]
+
+AddOption('--test',
+          action='store_true',
+          help='build test files')
+
+AddOption('--asan',
+          action='store_true',
+          help='turn on ASAN')
+
+ccflags_asan = ["-fsanitize=address", "-fno-omit-frame-pointer"] if GetOption('asan') else []
+ldflags_asan = ["-fsanitize=address"] if GetOption('asan') else []
+
+env = Environment(
+  ENV=os.environ,
+  CC='clang',
+  CXX='clang++',
+  CCFLAGS=[
+    "-g",
+    "-fPIC",
+    "-O2",
+    "-Wunused",
+    "-Werror",
+  ] + ccflags_asan,
+  LDFLAGS=ldflags_asan,
+  LINKFLAGS=ldflags_asan,
+
+  CFLAGS="-std=gnu11",
+  CXXFLAGS="-std=c++1z",
+  CPPPATH=cpppath,
+  LIBPATH=libpath,
+  CYTHONCFILESUFFIX=".cpp",
+  tools=["default", "cython"]
+)
+
+Export('env', 'arch')
+
+envCython = env.Clone(LIBS=[])
+envCython["CCFLAGS"] += ["-Wno-#warnings", "-Wno-deprecated-declarations"]
+if arch == "Darwin":
+  envCython["LINKFLAGS"] = ["-bundle", "-undefined", "dynamic_lookup"]
+elif arch == "aarch64":
+  envCython["LINKFLAGS"] = ["-shared"]
+  envCython["LIBS"] = [os.path.basename(sysconfig.get_paths()['include'])]
+else:
+  envCython["LINKFLAGS"] = ["-pthread", "-shared"]
+
+Export('envCython')
+
+
+SConscript(['SConscript'])
--- a/cereal/car.capnp
+++ b/cereal/car.capnp
@@ -130,6 +130,23 @@ struct CarEvent @0x9b1657f34caf3ad3 {
    neosUpdateRequiredDEPRECATED @88;
    modelLagWarningDEPRECATED @93;
    startupOneplusDEPRECATED @82;
+
+    #dp
+    preLaneChangeLeftALC @106;
+    preLaneChangeRightALC @107;
+    manualSteeringRequired @108;
+    manualSteeringRequiredBlinkersOn @109;
+    leadCarMoving @110;
+
+    # timebomb assist
+    timebombWarn @111;
+    timebombBypassing @112;
+    timebombBypassed @113;
+    mapdAlert @114;
+    
+    #mapd
+    speedLimitActive @115;
+    speedLimitValueChange @116;
  }
 }

@@ -196,6 +213,12 @@ struct CarState {
  leftBlindspot @33 :Bool; # Is there something blocking the left lane change
  rightBlindspot @34 :Bool; # Is there something blocking the right lane change

+  # dp
+  lkMode @38 :Bool;
+  stopSteering @39 :Bool; # timebomb - stopSteering
+  engineRPM @40 :Float32;
+  cruiseActualEnabled @41 :Bool;
+
  struct WheelSpeeds {
    # optional wheel speeds
    fl @0 :Float32;
@@ -211,6 +234,8 @@ struct CarState {
    speedOffset @3 :Float32;
    standstill @4 :Bool;
    nonAdaptive @5 :Bool;
+    #mapd
+    speedLimit @6 :Float32;
  }

  enum GearShifter {
@@ -248,7 +273,7 @@ struct CarState {
  }

  errorsDEPRECATED @0 :List(CarEvent.EventName);
-  brakeLightsDEPRECATED @19 :Bool;
+  brakeLights @19 :Bool;
 }

 # ******* radar state @ 20hz *******
--- a/cereal/dp.capnp
+++ b/cereal/dp.capnp
@@ -0,0 +1,62 @@
+using Cxx = import "./include/c++.capnp";
+$Cxx.namespace("cereal");
+
+using Java = import "./include/java.capnp";
+$Java.package("ai.comma.openpilot.cereal");
+$Java.outerClassname("dp");
+
+@0xbfa7e645486440c7;
+
+# dp.capnp: a home for deprecated structs
+
+# dp
+struct DragonConf {
+  dpThermalStarted @0 :Bool;
+  dpThermalOverheat @1 :Bool;
+  dpAtl @2 :Bool;
+  dpAtlOpLong @3 :Bool;
+  dpDashcamd @4 :Bool;
+  dpAutoShutdown @5 :Bool;
+  dpAthenad @6 :Bool;
+  dpUploader @7 :Bool;
+  dpLateralMode @8 :UInt8;
+  dpSignalOffDelay @9 :Float32;
+  dpLcMinMph @10 :UInt8;
+  dpLcAutoCont @11 :Bool;
+  dpLcAutoMinMph @12 :UInt8;
+  dpLcAutoDelay @13 :Float32;
+  dpAllowGas @14 :Bool;
+  dpFollowingProfileCtrl @15 :Bool;
+  dpFollowingProfile @16 :UInt8;
+  dpAccelProfileCtrl @17 :Bool;
+  dpAccelProfile @18 :UInt8;
+  dpGearCheck @19 :Bool;
+  dpSpeedCheck @20 :Bool;
+  dpUiDisplayMode @21 :UInt8;
+  dpUiSpeed @22 :Bool;
+  dpUiEvent @23 :Bool;
+  dpUiMaxSpeed @24 :Bool;
+  dpUiFace @25 :Bool;
+  dpUiLane @26 :Bool;
+  dpUiLead @27 :Bool;
+  dpUiSide @28 :Bool;
+  dpUiTop @29 :Bool;
+  dpUiBlinker @30 :Bool;
+  dpUiBrightness @31 :UInt8;
+  dpUiVolume @32 :Int8;
+  dpToyotaLdw @33 :Bool;
+  dpToyotaSng @34 :Bool;
+  dpToyotaCruiseOverride @35 :Bool;
+  dpToyotaCruiseOverrideVego @36 :Bool;
+  dpToyotaCruiseOverrideAt @37 :Float32;
+  dpToyotaCruiseOverrideSpeed @38 :Float32;
+  dpVwTimebombAssist @39 :Bool;
+  dpIpAddr @40 :Text;
+  dpCameraOffset @41 :Int8;
+  dpPathOffset @42 :Int8;
+  dpLocale @43 :Text;
+  dpSrLearner @44 :Bool;
+  dpSrCustom @45 :Float32;
+  dpAppd @46 :Bool;
+  dpMapd @47 :Bool;
+}
--- a/cereal/log.capnp
+++ b/cereal/log.capnp
@@ -7,6 +7,7 @@ $Java.outerClassname("Log");

 using Car = import "car.capnp";
 using Legacy = import "legacy.capnp";
+using Dp = import "dp.capnp";

@0xf3b1f17e25a4285b;

@@ -49,6 +50,7 @@ struct InitData {
    chffrIos @3;
    tici @4;
    pc @5;
+    jetson @6;
  }

  struct PandaInfo {
@@ -664,12 +666,12 @@ struct ControlsState @0x97ff69c53601abf1 {
  decelForTurnDEPRECATED @47 :Bool;
  decelForModelDEPRECATED @54 :Bool;
  awarenessStatusDEPRECATED @26 :Float32;
-  angleSteersDEPRECATED @13 :Float32;
+  angleSteers @13 :Float32; # dp
  vCurvatureDEPRECATED @46 :Float32;
  mapValidDEPRECATED @49 :Bool;
  jerkFactorDEPRECATED @12 :Float32;
  steerOverrideDEPRECATED @20 :Bool;
-  steeringAngleDesiredDegDEPRECATED @29 :Float32;
+  steeringAngleDesiredDeg @29 :Float32; # dp
 }

 struct ModelDataV2 {
@@ -812,12 +814,31 @@ struct LongitudinalPlan @0xe00b5b3eba12876c {
  speeds @33 :List(Float32);
  jerks @34 :List(Float32);

+  #mapd
+  visionTurnControllerState @35 :VisionTurnControllerState;
+  visionTurnSpeed @36 :Float32;
+
+  speedLimitControlState @37 :SpeedLimitControlState;
+  speedLimit @38 :Float32;
+  speedLimitOffset @39 :Float32;
+  distToSpeedLimit @40 :Float32;
+  isMapSpeedLimit @41 :Bool;
+
+  distToTurn @42 :Float32;
+  turnSpeed @43 :Float32;
+  turnSpeedControlState @44 :SpeedLimitControlState;
+  turnSign @45 :Int16;
+
  enum LongitudinalPlanSource {
    cruise @0;
    lead0 @1;
    lead1 @2;
    lead2 @3;
    e2e @4;
+    #mapd
+    turn @5;
+    limit @6;
+    turnlimit @7;
  }

  # deprecated
@@ -853,6 +874,21 @@ struct LongitudinalPlan @0xe00b5b3eba12876c {
    x @0 :List(Float32);
    y @1 :List(Float32);
  }
+
+  #mapd
+  enum SpeedLimitControlState {
+    inactive @0; # No speed limit set or not enabled by parameter.
+    tempInactive @1; # User wants to ignore speed limit until it changes.
+    adapting @2; # Reducing speed to match new speed limit.
+    active @3; # Cruising at speed limit.
+  }
+
+  enum VisionTurnControllerState {
+    disabled @0; # No predicted substancial turn on vision range or feature disabled.
+    entering @1; # A subsantial turn is predicted ahead, adapting speed to turn confort levels.
+    turning @2; # Actively turning. Managing acceleration to provide a roll on turn feeling.
+    leaving @3; # Road ahead straightens. Start to allow positive acceleration.
+  }
 }

 struct LateralPlan @0xe1e9318e2ae8b51e {
@@ -861,6 +897,9 @@ struct LateralPlan @0xe1e9318e2ae8b51e {
  rProb @7 :Float32;
  dPathPoints @20 :List(Float32);
  dProb @21 :Float32;
+  #mapd
+  dPathWLinesX @30 :List(Float32);
+  dPathWLinesY @31 :List(Float32);

  mpcSolutionValid @9 :Bool;
  desire @17 :Desire;
@@ -873,6 +912,9 @@ struct LateralPlan @0xe1e9318e2ae8b51e {
  curvatures @27 :List(Float32);
  curvatureRates @28 :List(Float32);

+  # dp
+  dpALCAllowed @29 :Bool;
+
  enum Desire {
    none @0;
    turnLeft @1;
@@ -1324,6 +1366,23 @@ struct LiveMapDataDEPRECATED {
  mapValid @11 :Bool;
 }

+struct LiveMapData {
+  speedLimitValid @0 :Bool;
+  speedLimit @1 :Float32;
+  speedLimitAheadValid @2 :Bool;
+  speedLimitAhead @3 :Float32;
+  speedLimitAheadDistance @4 :Float32;
+  turnSpeedLimitValid @5 :Bool;
+  turnSpeedLimit @6 :Float32;
+  turnSpeedLimitEndDistance @7 :Float32;
+  turnSpeedLimitSign @8 :Int16;
+  turnSpeedLimitsAhead @9 :List(Float32);
+  turnSpeedLimitsAheadDistances @10 :List(Float32);
+  turnSpeedLimitsAheadSigns @11 :List(Int16);
+  lastGpsTimestamp @12 :Int64;  # Milliseconds since January 1, 1970.
+  currentRoadName @13 :Text;
+}
+
 struct CameraOdometry {
  frameId @4 :UInt32;
  timestampEof @5 :UInt64;
@@ -1464,5 +1523,8 @@ struct Event {
    kalmanOdometryDEPRECATED @65 :Legacy.KalmanOdometry;
    gpsLocationDEPRECATED @21 :GpsLocationData;
    uiLayoutStateDEPRECATED @57 :Legacy.UiLayoutState;
+    dragonConf @80 :Dp.DragonConf;
+    #mapd
+    liveMapData @81: LiveMapData;
  }
 }
--- a/cereal/services.py
+++ b/cereal/services.py
@@ -62,8 +62,15 @@ services = {
  "managerState": (True, 2., 1),
  "uploaderState": (True, 0., 1),

+  #mapd
+  "liveMapData": (True, 0.),
+
  # debug
  "testJoystick": (False, 0.),
+
+  # dp
+  "thermal": (True, 2., 1),
+  "dragonConf": (False, 1.),
 }
 service_list = {name: Service(new_port(idx), *vals) for  # type: ignore
                idx, (name, vals) in enumerate(services.items())}
--- a/common/api/init.py
+++ b/common/api/init.py
@@ -4,8 +4,9 @@ import requests
 from datetime import datetime, timedelta
 from common.basedir import PERSIST
 from selfdrive.version import version
+from common.params import Params

-API_HOST = os.getenv('API_HOST', 'https://api.commadotai.com')
+API_HOST = os.getenv('API_HOST', 'https://api.commadotai.com') if not Params().get_bool("dp_api_custom") else Params().get("dp_api_custom_url", encoding='utf-8')

 class Api():
  def __init__(self, dongle_id):
--- a/common/basedir.py
+++ b/common/basedir.py
@@ -1,11 +1,11 @@
 import os
 from pathlib import Path

-from selfdrive.hardware import PC
+from selfdrive.hardware import PC, JETSON

 BASEDIR = os.path.abspath(os.path.join(os.path.dirname(os.path.realpath(__file__)), "../"))

-if PC:
+if PC or JETSON:
  PERSIST = os.path.join(str(Path.home()), ".comma", "persist")
 else:
  PERSIST = "/persist"
--- a/common/dp_common.py
+++ b/common/dp_common.py
@@ -0,0 +1,80 @@
+#!/usr/bin/env python3.7
+import subprocess
+from cereal import car
+from common.params import Params
+from common.realtime import sec_since_boot
+import os
+params = Params()
+PARAM_PATH = params.get_params_path() + '/d/'
+LAST_MODIFIED = PARAM_PATH + "dp_last_modified"
+
+def is_online():
+  try:
+    return not subprocess.call(["ping", "-W", "4", "-c", "1", "117.28.245.92"])
+  except ProcessLookupError:
+    return False
+
+def common_controller_ctrl(enabled, dragonconf, blinker_on, steer_req, v_ego):
+  if enabled:
+    if dragonconf.dpLateralMode == 0 and blinker_on:
+      steer_req = 0 if isinstance(steer_req, int) else False
+  return steer_req
+
+def common_interface_atl(ret, atl):
+  # dp
+  enable_acc = ret.cruiseState.enabled
+  if atl and ret.cruiseState.available:
+    enable_acc = True
+    if ret.gearShifter in [car.CarState.GearShifter.reverse, car.CarState.GearShifter.park]:
+      enable_acc = False
+    if ret.seatbeltUnlatched or ret.doorOpen:
+      enable_acc = False
+  return enable_acc
+
+def common_interface_get_params_lqr(ret):
+  if params.get_bool('dp_lqr'):
+    ret.lateralTuning.init('lqr')
+    ret.lateralTuning.lqr.scale = 1500.0
+    ret.lateralTuning.lqr.ki = 0.05
+
+    ret.lateralTuning.lqr.a = [0., 1., -0.22619643, 1.21822268]
+    ret.lateralTuning.lqr.b = [-1.92006585e-04, 3.95603032e-05]
+    ret.lateralTuning.lqr.c = [1., 0.]
+    ret.lateralTuning.lqr.k = [-110.73572306, 451.22718255]
+    ret.lateralTuning.lqr.l = [0.3233671, 0.3185757]
+    ret.lateralTuning.lqr.dcGain = 0.002237852961363602
+  return ret
+
+
+def get_last_modified(delay, old_check, old_modified):
+  new_check = sec_since_boot()
+  if old_check is None or new_check - old_check >= delay:
+    return new_check, os.stat(LAST_MODIFIED).st_mtime
+  else:
+    return old_check, old_modified
+
+def param_get_if_updated(param, type, old_val, old_modified):
+  try:
+    modified = os.stat(PARAM_PATH + param).st_mtime
+  except OSError:
+    return old_val, old_modified
+  if old_modified != modified:
+    new_val = param_get(param, type, old_val)
+    new_modified = modified
+  else:
+    new_val = old_val
+    new_modified = old_modified
+  return new_val, new_modified
+
+def param_get(param_name, type, default):
+  try:
+    val = params.get(param_name, encoding='utf8').rstrip('\x00')
+    if type == 'bool':
+      val = val == '1'
+    elif type == 'int':
+      val = int(val)
+    elif type == 'float':
+      val = float(val)
+  except (TypeError, ValueError):
+    val = default
+  return val
--- a/common/dp_conf.py
+++ b/common/dp_conf.py
@@ -0,0 +1,230 @@
+#!/usr/bin/env python3.7
+import os
+import sys
+import json
+import time
+from math import floor
+
+'''
+* type: Bool, Int8, UInt8, UInt16, Float32
+* conf_type: param, struct
+* dependencies needs to use struct and loaded prior so we don't have to read the param multiple times.
+* update_once: True, False (the param will only load up once, need both param and struct defined)
+'''
+confs = [
+  # thermald data
+  {'name': 'dp_thermal_started', 'default': False, 'type': 'Bool', 'conf_type': ['struct']},
+  {'name': 'dp_thermal_overheat', 'default': False, 'type': 'Bool', 'conf_type': ['struct']},
+
+  # custom api server
+  {'name': 'dp_api_custom', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_api_custom_url', 'default': 'https://api.retropilot.org', 'type': 'Text', 'depends': [{'name': 'dp_api_custom', 'vals': [True]}], 'conf_type': ['param']},
+
+  {'name': 'dp_atl', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct'], 'update_once': True},
+  {'name': 'dp_atl_op_long', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [True]}], 'conf_type': ['param', 'struct'], 'update_once': True},
+  # dashcam related
+  {'name': 'dp_dashcamd', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  # auto shutdown
+  {'name': 'dp_auto_shutdown', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_auto_shutdown_in', 'default': 90, 'type': 'UInt16', 'min': 0, 'max': 600, 'depends': [{'name': 'dp_auto_shutdown', 'vals': [True]}], 'conf_type': ['param']},
+  # service
+  {'name': 'dp_updated', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_logger', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_athenad', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct'], 'update_once': True},
+  {'name': 'dp_uploader', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct'], 'update_once': True},
+  # {'name': 'dp_gpxd', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_hotspot_on_boot', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  # lat ctrl
+  {'name': 'dp_lateral_mode', 'default': 1, 'type': 'UInt8', 'min': 0, 'max': 2, 'conf_type': ['param', 'struct']},
+  {'name': 'dp_signal_off_delay', 'default': 3., 'type': 'Float32', 'min': 0., 'max': 10., 'depends': [{'name': 'dp_lateral_mode', 'vals': [0]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_lc_min_mph', 'default': 45, 'type': 'UInt8', 'min': 0, 'max': 255, 'depends': [{'name': 'dp_lateral_mode', 'vals': [1,2]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_lc_auto_cont', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_lateral_mode', 'vals': [2]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_lc_auto_min_mph', 'default': 60, 'type': 'UInt8', 'min': 0, 'max': 255, 'depends': [{'name': 'dp_lateral_mode', 'vals': [2]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_lc_auto_delay', 'default': 3., 'type': 'Float32', 'min': 0., 'max': 10., 'depends': [{'name': 'dp_lateral_mode', 'vals': [2]}], 'conf_type': ['param', 'struct']},
+  # long ctrl
+  {'name': 'dp_allow_gas', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_following_profile_ctrl', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_following_profile', 'default': 0, 'type': 'UInt8', 'min': 0, 'max': 2, 'depends': [{'name': 'dp_following_profile_ctrl', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_accel_profile_ctrl', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_accel_profile', 'default': 0, 'type': 'UInt8', 'min': 0, 'max': 2, 'depends': [{'name': 'dp_accel_profile_ctrl', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  # safety
+  {'name': 'dp_gear_check', 'default': True, 'type': 'Bool', 'depends': [{'name': 'dp_atl', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_speed_check', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_temp_monitor', 'default': True, 'type': 'Bool', 'conf_type': ['param']},
+  # UIs
+  {'name': 'dp_ui_display_mode', 'default': 0, 'type': 'UInt8', 'min': 0, 'max': 2, 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_speed', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_event', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_max_speed', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_face', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_lane', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_lead', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_side', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_top', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_blinker', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_brightness', 'default': 0, 'type': 'UInt8', 'min': 0, 'max': 100, 'conf_type': ['param', 'struct']},
+  {'name': 'dp_ui_volume', 'default': -5, 'type': 'Int8', 'min': -5, 'max': 100, 'conf_type': ['param', 'struct']},
+  # toyota
+  {'name': 'dp_lexus_rx_rpm_fix', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_toyota_ldw', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_toyota_sng', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_toyota_zss', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_toyota_fp_btn_link', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_toyota_ap_btn_link', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_toyota_disable_relay', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_toyota_cruise_override', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_toyota_cruise_override_vego', 'default': False, 'type': 'Bool', 'depends': [{'name': 'dp_toyota_cruise_override', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_toyota_cruise_override_at', 'default': 44, 'type': 'Float32', 'depends': [{'name': 'dp_toyota_cruise_override', 'vals': [True]}], 'min': 0, 'max': 50., 'conf_type': ['param', 'struct']},
+  {'name': 'dp_toyota_cruise_override_speed', 'default': 32, 'type': 'Float32', 'depends': [{'name': 'dp_toyota_cruise_override', 'vals': [True]}], 'min': 0, 'max': 50., 'conf_type': ['param', 'struct']},
+  # hyundai
+  {'name': 'dp_hkg_smart_mdps', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  # honda
+  {'name': 'dp_honda_eps_mod', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_honda_kmh_display', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  # volkswagen
+  {'name': 'dp_vw_panda', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_vw_timebomb_assist', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  #misc
+  {'name': 'dp_ip_addr', 'default': '', 'type': 'Text', 'conf_type': ['struct']},
+  {'name': 'dp_fan_mode', 'default': 0, 'type': 'UInt8', 'min': 0, 'max': 2, 'conf_type': ['param']},
+  {'name': 'dp_last_modified', 'default': str(floor(time.time())), 'type': 'Text', 'conf_type': ['param']},
+  {'name': 'dp_camera_offset', 'default': 6, 'type': 'Int8', 'min': -100, 'max': 100, 'conf_type': ['param', 'struct']},
+  {'name': 'dp_path_offset', 'default': 0, 'type': 'Int8', 'min': -100, 'max': 100, 'conf_type': ['param', 'struct']},
+
+  {'name': 'dp_locale', 'default': 'en-US', 'type': 'Text', 'conf_type': ['param', 'struct'], 'update_once': True},
+  {'name': 'dp_reg', 'default': True, 'type': 'Bool', 'conf_type': ['param']},
+  # sr learner related
+  {'name': 'dp_sr_learner', 'default': True, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_sr_custom', 'default': 9.99, 'min': 9.99, 'max': 30., 'type': 'Float32', 'depends': [{'name': 'dp_sr_learner', 'vals': [False]}], 'conf_type': ['param', 'struct']},
+  {'name': 'dp_sr_stock', 'default': 9.99, 'min': 9.99, 'max': 100., 'type': 'Float32', 'conf_type': ['param']},
+
+  {'name': 'dp_lqr', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_reset_live_param_on_start', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+
+  {'name': 'dp_appd', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  {'name': 'dp_jetson', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_car_assigned', 'default': '', 'type': 'Text', 'conf_type': ['param']},
+  {'name': 'dp_car_list', 'default': '', 'type': 'Text', 'conf_type': ['param']},
+  {'name': 'dp_no_batt', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_last_candidate', 'default': '', 'type': 'Text', 'conf_type': ['param']},
+  {'name': 'dp_prebuilt', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_gpxd', 'default': False, 'type': 'Bool', 'conf_type': ['param']},
+  {'name': 'dp_mapd', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  # custom server support
+  # {'name': 'dp_custom_server', 'default': False, 'type': 'Bool', 'conf_type': ['param', 'struct']},
+  # {'name': 'dp_custom_server_url', 'default': 'api.retropilot.org', 'type': 'Text', 'depends': [{'name': 'dp_custom_server', 'vals': [True]}], 'conf_type': ['param', 'struct']},
+]
+
+def get_definition(name):
+  for conf in confs:
+    if conf['name'] == name:
+      return conf
+  return None
+
+def to_param_val(name, val):
+  conf = get_definition(name)
+  if conf is not None:
+    type = conf['type'].lower()
+    try:
+      if 'bool' in type:
+        val = '1' if val else '0'
+      elif 'int' in type:
+        val = int(val)
+      elif 'float' in type:
+        val = float(val)
+      return str(val)
+    except (ValueError, TypeError):
+      return ''
+  return ''
+
+def to_struct_val(name, val):
+  conf = get_definition(name)
+  if conf is not None:
+    try:
+      type = conf['type'].lower()
+      if 'bool' in type:
+        val = True if val == '1' else False
+      elif 'int' in type:
+        val = int(val)
+      elif 'float' in type:
+        val = float(val)
+      return val
+    except (ValueError, TypeError):
+      return None
+  return None
+
+'''
+function to convert param name into struct name.
+'''
+def get_struct_name(snake_str):
+  components = snake_str.split('_')
+  # We capitalize the first letter of each component except the first one
+  # with the 'title' method and join them together.
+  return components[0] + ''.join(x.title() for x in components[1:])
+
+'''
+function to generate struct for log.capnp
+'''
+def gen_log_struct():
+  count = 0
+  str = "# dp\n"
+  str += "struct DragonConf {\n"
+  for conf in confs:
+    name = get_struct_name(conf['name'])
+    if 'struct' in conf['conf_type']:
+      str += f"  {name} @{count} :{conf['type']};\n"
+      count += 1
+  str += "}"
+  print(str)
+
+'''
+function to generate support car list
+'''
+def get_support_car_list():
+  attrs = ['FINGERPRINTS', 'FW_VERSIONS']
+  cars = dict({"cars": []})
+  for car_folder in [x[0] for x in os.walk('/data/openpilot/selfdrive/car')]:
+    try:
+      car_name = car_folder.split('/')[-1]
+      if car_name != "mock":
+        names = []
+        for attr in attrs:
+          values = __import__('selfdrive.car.%s.values' % car_name, fromlist=[attr])
+          if hasattr(values, attr):
+            attr_values = getattr(values, attr)
+          else:
+            continue
+          if isinstance(attr_values, dict):
+            for f, v in attr_values.items():
+              if f not in names:
+                names.append(f)
+          names.sort()
+        brand_models = {"brand": car_name.upper(), "models": names }
+        cars["cars"].append(brand_models)
+    except (ImportError, IOError, ValueError):
+      pass
+  return json.dumps(cars)
+
+'''
+function to init param value.
+should add this into manager.py
+'''
+def init_params_vals(params):
+  for conf in confs:
+    if 'param' in conf['conf_type']:
+      if conf['name'] == 'dp_car_list':
+        params.put(conf['name'], get_support_car_list())
+      elif params.get(conf['name']) is None:
+        params.put(conf['name'], to_param_val(conf['name'], conf['default']))
+
+def gen_params_cc_keys():
+  for conf in confs:
+    if 'param' in conf['conf_type']:
+      print("    {\"%s\", PERSISTENT}," % conf['name'])
+
+
+if __name__ == "__main__":
+  if (len(sys.argv) > 1) and sys.argv[1] == 'cc':
+    gen_params_cc_keys()
+  else:
+    gen_log_struct()
--- a/common/dp_time.py
+++ b/common/dp_time.py
@@ -0,0 +1,7 @@
+#!/usr/bin/env python3.7
+
+# delay of reading last modified
+LAST_MODIFIED_THERMALD = 10.
+LAST_MODIFIED_SYSTEMD = 1.
+LAST_MODIFIED_LANE_PLANNER = 3.
+LAST_MODIFIED_UPLOADER = 10.
--- a/common/i18n.py
+++ b/common/i18n.py
@@ -0,0 +1,14 @@
+import gettext
+from selfdrive.hardware import EON
+from selfdrive.hardware.eon.hardware import getprop
+
+locale_dir = '/data/openpilot/selfdrive/assets/locales'
+supported_language = ['en-US', 'zh-TW', 'zh-CN', 'ja-JP', 'ko-KR']
+
+def get_locale():
+  return getprop("persist.sys.locale") if EON else 'en-US'
+
+def events():
+  i18n = gettext.translation('events', localedir=locale_dir, fallback=True, languages=[get_locale()])
+  i18n.install()
+  return i18n.gettext
--- a/common/params_pxd.pxd
+++ b/common/params_pxd.pxd
@@ -26,3 +26,5 @@ cdef extern from "selfdrive/common/params.h":
    int putBool(string, bool) nogil
    bool checkKey(string) nogil
    void clearAll(ParamKeyType)
+
+    string get_params_path()
--- a/common/params_pyx.pyx
+++ b/common/params_pyx.pyx
@@ -106,6 +106,8 @@ cdef class Params:
    with nogil:
      self.p.remove(k)

+  def get_params_path(self):
+    return self.p.get_params_path().decode("utf-8")

 def put_nonblocking(key, val, d=None):
  def f(key, val):
--- a/common/realtime.py
+++ b/common/realtime.py
@@ -6,7 +6,7 @@ import multiprocessing
 from typing import Optional

 from common.clock import sec_since_boot  # pylint: disable=no-name-in-module, import-error
-from selfdrive.hardware import PC, TICI
+from selfdrive.hardware import PC, TICI, JETSON


 # time step for each process
@@ -33,12 +33,12 @@ class Priority:


 def set_realtime_priority(level: int) -> None:
-  if not PC:
+  if JETSON or not PC:
    os.sched_setscheduler(0, os.SCHED_FIFO, os.sched_param(level))  # type: ignore[attr-defined]


 def set_core_affinity(core: int) -> None:
-  if not PC:
+  if JETSON or not PC:
    os.sched_setaffinity(0, [core,])


--- a/common/text_window.py
+++ b/common/text_window.py
@@ -33,6 +33,7 @@ class TextWindow:
    if self.text_proc is not None:
      while True:
        if self.get_status() == 1:
+          os.system('/data/openpilot/scripts/reset_update.sh')
          return
        time.sleep(0.1)

--- a/common/transformations/camera.py
+++ b/common/transformations/camera.py
@@ -5,12 +5,14 @@ from selfdrive.hardware import TICI

 ## -- hardcoded hardware params --
 eon_f_focal_length = 910.0
-eon_d_focal_length = 650.0
+eon_d_focal_length = 860.0
+leon_d_focal_length = 650.0
 tici_f_focal_length = 2648.0
 tici_e_focal_length = tici_d_focal_length = 567.0 # probably wrong? magnification is not consistent across frame

 eon_f_frame_size = (1164, 874)
-eon_d_frame_size = (816, 612)
+eon_d_frame_size = (1152, 864)
+leon_d_frame_size = (816, 612)
 tici_f_frame_size = tici_e_frame_size = tici_d_frame_size = (1928, 1208)

 # aka 'K' aka camera_frame_from_view_frame
@@ -20,6 +22,11 @@ eon_fcam_intrinsics = np.array([
  [0.0,  0.0,                                          1.0]])
 eon_intrinsics = eon_fcam_intrinsics # xx

+leon_dcam_intrinsics = np.array([
+  [leon_d_focal_length,  0.0,  float(leon_d_frame_size[0])/2],
+  [0.0,  leon_d_focal_length,  float(leon_d_frame_size[1])/2],
+  [0.0,  0.0,                                            1.0]])
+
 eon_dcam_intrinsics = np.array([
  [eon_d_focal_length,  0.0,  float(eon_d_frame_size[0])/2],
  [0.0,  eon_d_focal_length,  float(eon_d_frame_size[1])/2],
--- a/installer/custom/install_gfortran.sh
+++ b/installer/custom/install_gfortran.sh
@@ -0,0 +1,34 @@
+#!/data/data/com.termux/files/usr/bin/sh
+# Get some needed tools. coreutils for mkdir command, gnugp for the signing key, and apt-transport-https to actually connect to the repo
+apt-get update
+apt-get --assume-yes upgrade
+apt-get --assume-yes install coreutils gnupg
+
+# Make the sources.list.d directory
+mkdir -p $PREFIX/etc/apt/sources.list.d
+
+# Write the needed source file
+echo "deb https://its-pointless.github.io/files/24 termux extras" > $PREFIX/etc/apt/sources.list.d/pointless.list
+
+# Add signing key from https://its-pointless.github.io/pointless.gpg
+curl -sL https://its-pointless.github.io/pointless.gpg | apt-key add -
+
+# Update apt
+apt update
+
+# install gfortran
+apt install gcc-11 -y
+setupclang-gfort-11
+
+# Elf cleaner is needed to remove a DT_ENTRY warning that prints out when gfortran -v is called to get 
+# its version number and this breaks the pip installation script when fortran is used.
+
+# Build elf cleaner
+SCRIPTPATH="$( cd -- "$(dirname "$0")" >/dev/null 2>&1 ; pwd -P )"
+ELFCLEANERPATH=$SCRIPTPATH/termux-elf-cleaner/
+cd $ELFCLEANERPATH
+make
+
+# Perform elf cleaner on gfortran
+./termux-elf-cleaner $(which gfortran)
+
--- a/installer/custom/termux-elf-cleaner/COPYING
+++ b/installer/custom/termux-elf-cleaner/COPYING
@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    {one line to give the program's name and a brief idea of what it does.}
+    Copyright (C) {year}  {name of author}
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    {project}  Copyright (C) {year}  {fullname}
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
--- a/installer/custom/termux-elf-cleaner/Makefile
+++ b/installer/custom/termux-elf-cleaner/Makefile
@@ -0,0 +1,16 @@
+CXXFLAGS += -std=c++11 -Wall -Wextra -pedantic
+PREFIX ?= /usr/local
+
+termux-elf-cleaner: termux-elf-cleaner.cpp
+
+clean:
+	rm -f termux-elf-cleaner
+
+install: termux-elf-cleaner
+	mkdir -p $(PREFIX)/bin
+	install termux-elf-cleaner $(PREFIX)/bin/termux-elf-cleaner
+
+uninstall:
+	rm -f $(PREFIX)/bin/termux-elf-cleaner
+
+.PHONY: clean install uninstall
--- a/installer/custom/termux-elf-cleaner/README.md
+++ b/installer/custom/termux-elf-cleaner/README.md
@@ -0,0 +1,39 @@
+# termux-elf-cleaner
+Utility for Android ELF files to remove unused parts that the linker warns about.
+
+## Description
+When loading ELF files, the Android linker warns about unsupported dynamic section entries with warnings such as:
+
+    WARNING: linker: /data/data/org.kost.nmap.android.networkmapper/bin/nmap: unused DT entry: type 0x6ffffffe arg 0x8a7d4
+    WARNING: linker: /data/data/org.kost.nmap.android.networkmapper/bin/nmap: unused DT entry: type 0x6fffffff arg 0x3
+
+This utility strips away the following dynamic section entries:
+
+- `DT_RPATH` - not supported in any Android version.
+- `DT_RUNPATH` - supported from Android 7.0.
+- `DT_VERDEF` - supported from Android 6.0.
+- `DT_VERDEFNUM` - supported from Android 6.0.
+- `DT_VERNEEDED` - supported from Android 6.0.
+- `DT_VERNEEDNUM` - supported from Android 6.0.
+- `DT_VERSYM` - supported from Android 6.0.
+
+It also removes the three ELF sections of type:
+
+- `SHT_GNU_verdef`
+- `SHT_GNU_verneed`
+- `SHT_GNU_versym`
+
+## Usage
+```sh
+usage: termux-elf-cleaner <filenames>
+
+Processes ELF files to remove unsupported section types and
+dynamic section entries which the Android linker warns about.
+```
+
+## Author
+Fredrik Fornwall ([@fornwall](https://github.com/fornwall)).
+
+## License
+
+SPDX-License-Identifier: [GPL-3.0-or-later](https://spdx.org/licenses/GPL-3.0-or-later.html)
--- a/installer/custom/termux-elf-cleaner/elf.h
+++ b/installer/custom/termux-elf-cleaner/elf.h
@@ -0,0 +1,211 @@
+#ifndef ELF_H_INCLUDED
+#define ELF_H_INCLUDED
+
+#include <stdint.h>
+
+/* Type for a 16-bit quantity.  */
+typedef uint16_t Elf32_Half;
+typedef uint16_t Elf64_Half;
+
+/* Types for signed and unsigned 32-bit quantities.  */
+typedef uint32_t Elf32_Word;
+typedef int32_t  Elf32_Sword;
+typedef uint32_t Elf64_Word;
+typedef int32_t  Elf64_Sword;
+
+/* Types for signed and unsigned 64-bit quantities.  */
+typedef uint64_t Elf32_Xword;
+typedef int64_t  Elf32_Sxword;
+typedef uint64_t Elf64_Xword;
+typedef int64_t  Elf64_Sxword;
+
+/* Type of addresses.  */
+typedef uint32_t Elf32_Addr;
+typedef uint64_t Elf64_Addr;
+
+/* Type of file offsets.  */
+typedef uint32_t Elf32_Off;
+typedef uint64_t Elf64_Off;
+
+/* Type for section indices, which are 16-bit quantities.  */
+typedef uint16_t Elf32_Section;
+typedef uint16_t Elf64_Section;
+
+/* Type for version symbol information.  */
+typedef Elf32_Half Elf32_Versym;
+typedef Elf64_Half Elf64_Versym;
+
+
+/* The ELF file header.  This appears at the start of every ELF file.  */
+typedef struct {
+	unsigned char e_ident[16];     /* Magic number and other info */
+	Elf32_Half    e_type;                 /* Object file type */
+	Elf32_Half    e_machine;              /* Architecture */
+	Elf32_Word    e_version;              /* Object file version */
+	Elf32_Addr    e_entry;                /* Entry point virtual address */
+	Elf32_Off     e_phoff;                /* Program header table (usually follows elf header directly) file offset */
+	Elf32_Off     e_shoff;                /* Section header table (at end of file) file offset */
+	Elf32_Word    e_flags;                /* Processor-specific flags */
+	Elf32_Half    e_ehsize;               /* ELF header size in bytes */
+	Elf32_Half    e_phentsize;            /* Program header table entry size */
+	Elf32_Half    e_phnum;                /* Program header table entry count */
+	Elf32_Half    e_shentsize;            /* Section header table entry size */
+	Elf32_Half    e_shnum;                /* Section header table entry count */
+	Elf32_Half    e_shstrndx;             /* Section header string table index */
+} Elf32_Ehdr;
+typedef struct {
+	unsigned char e_ident[16];     /* Magic number and other info */
+	Elf64_Half    e_type;                 /* Object file type */
+	Elf64_Half    e_machine;              /* Architecture */
+	Elf64_Word    e_version;              /* Object file version */
+	Elf64_Addr    e_entry;                /* Entry point virtual address */
+	Elf64_Off     e_phoff;                /* Program header table file offset */
+	Elf64_Off     e_shoff;                /* Section header table file offset */
+	Elf64_Word    e_flags;                /* Processor-specific flags */
+	Elf64_Half    e_ehsize;               /* ELF header size in bytes */
+	Elf64_Half    e_phentsize;            /* Program header table entry size */
+	Elf64_Half    e_phnum;                /* Program header table entry count */
+	Elf64_Half    e_shentsize;            /* Section header table entry size */
+	Elf64_Half    e_shnum;                /* Section header table entry count */
+	Elf64_Half    e_shstrndx;             /* Section header string table index */
+} Elf64_Ehdr;
+
+/* Section header entry. The number of section entries in the file are determined by the "e_shnum" field of the ELF header.*/
+typedef struct {
+	Elf32_Word    sh_name;                /* Section name (string tbl index) */
+	Elf32_Word    sh_type;                /* Section type */
+	Elf32_Word    sh_flags;               /* Section flags */
+	Elf32_Addr    sh_addr;                /* Section virtual addr at execution */
+	Elf32_Off     sh_offset;              /* Section file offset */
+	Elf32_Word    sh_size;                /* Section size in bytes */
+	Elf32_Word    sh_link;                /* Link to another section */
+	Elf32_Word    sh_info;                /* Additional section information */
+	Elf32_Word    sh_addralign;           /* Section alignment */
+	Elf32_Word    sh_entsize;             /* Entry size if section holds table */
+} Elf32_Shdr;
+typedef struct {
+	Elf64_Word    sh_name;                /* Section name (string tbl index) */
+	Elf64_Word    sh_type;                /* Section type */
+	Elf64_Xword   sh_flags;               /* Section flags */
+	Elf64_Addr    sh_addr;                /* Section virtual addr at execution */
+	Elf64_Off     sh_offset;              /* Section file offset */
+	Elf64_Xword   sh_size;                /* Section size in bytes */
+	Elf64_Word    sh_link;                /* Link to another section */
+	Elf64_Word    sh_info;                /* Additional section information */
+	Elf64_Xword   sh_addralign;           /* Section alignment */
+	Elf64_Xword   sh_entsize;             /* Entry size if section holds table */
+} Elf64_Shdr;
+
+/* Legal values for sh_type (section type).  */
+#define SHT_NULL          0             /* Section header table entry unused */
+#define SHT_PROGBITS      1             /* Program data */
+#define SHT_SYMTAB        2             /* Symbol table */
+#define SHT_STRTAB        3             /* String table */
+#define SHT_RELA          4             /* Relocation entries with addends */
+#define SHT_HASH          5             /* Symbol hash table */
+#define SHT_DYNAMIC       6             /* Dynamic linking information. Contains Elf32_Dyn/Elf64_Dyn entries. */
+#define SHT_NOTE          7             /* Notes */
+#define SHT_NOBITS        8             /* Program space with no data (bss) */
+#define SHT_REL           9             /* Relocation entries, no addends */
+#define SHT_SHLIB         10            /* Reserved */
+#define SHT_DYNSYM        11            /* Dynamic linker symbol table */
+#define SHT_INIT_ARRAY    14            /* Array of constructors */
+#define SHT_FINI_ARRAY    15            /* Array of destructors */
+#define SHT_PREINIT_ARRAY 16            /* Array of pre-constructors */
+#define SHT_GROUP         17            /* Section group */
+#define SHT_SYMTAB_SHNDX  18            /* Extended section indeces */
+#define SHT_NUM           19            /* Number of defined types.  */
+#define SHT_LOOS          0x60000000    /* Start OS-specific.  */
+#define SHT_GNU_ATTRIBUTES 0x6ffffff5   /* Object attributes.  */
+#define SHT_GNU_HASH      0x6ffffff6    /* GNU-style hash table.  */
+#define SHT_GNU_LIBLIST   0x6ffffff7    /* Prelink library list */
+#define SHT_CHECKSUM      0x6ffffff8    /* Checksum for DSO content.  */
+#define SHT_LOSUNW        0x6ffffffa    /* Sun-specific low bound.  */
+#define SHT_SUNW_move     0x6ffffffa
+#define SHT_SUNW_COMDAT   0x6ffffffb
+#define SHT_SUNW_syminfo  0x6ffffffc
+#define SHT_GNU_verdef    0x6ffffffd    /* Version definition section.  */
+#define SHT_GNU_verneed   0x6ffffffe    /* Version needs section.  */
+#define SHT_GNU_versym    0x6fffffff    /* Version symbol table.  */
+#define SHT_HISUNW        0x6fffffff    /* Sun-specific high bound.  */
+#define SHT_HIOS          0x6fffffff    /* End OS-specific type */
+#define SHT_LOPROC        0x70000000    /* Start of processor-specific */
+#define SHT_HIPROC        0x7fffffff    /* End of processor-specific */
+#define SHT_LOUSER        0x80000000    /* Start of application-specific */
+#define SHT_HIUSER        0x8fffffff    /* End of application-specific */
+
+/* Dynamic section entry.  */
+typedef struct {
+	Elf32_Sword d_tag;                  			/* Dynamic entry type */
+	union { Elf32_Word d_val; Elf32_Addr d_ptr; } d_un; 	/* Integer or address value */
+} Elf32_Dyn;
+typedef struct {
+	Elf64_Sxword d_tag;                  			/* Dynamic entry type */
+	union { Elf64_Xword d_val; Elf64_Addr d_ptr; } d_un;	/* Integer or address value */
+} Elf64_Dyn;
+
+/* Legal values for d_tag (dynamic entry type).  */
+#define DT_NULL         0               /* Marks end of dynamic section */
+#define DT_NEEDED       1               /* Name of needed library */
+#define DT_PLTRELSZ     2               /* Size in bytes of PLT relocs */
+#define DT_PLTGOT       3               /* Processor defined value */
+#define DT_HASH         4               /* Address of symbol hash table */
+#define DT_STRTAB       5               /* Address of string table */
+#define DT_SYMTAB       6               /* Address of symbol table */
+#define DT_RELA         7               /* Address of Rela relocs */
+#define DT_RELASZ       8               /* Total size of Rela relocs */
+#define DT_RELAENT      9               /* Size of one Rela reloc */
+#define DT_STRSZ        10              /* Size of string table */
+#define DT_SYMENT       11              /* Size of one symbol table entry */
+#define DT_INIT         12              /* Address of init function */
+#define DT_FINI         13              /* Address of termination function */
+#define DT_SONAME       14              /* Name of shared object */
+#define DT_RPATH        15              /* Library search path (deprecated) */
+#define DT_SYMBOLIC     16              /* Start symbol search here */
+#define DT_REL          17              /* Address of Rel relocs */
+#define DT_RELSZ        18              /* Total size of Rel relocs */
+#define DT_RELENT       19              /* Size of one Rel reloc */
+#define DT_PLTREL       20              /* Type of reloc in PLT */
+#define DT_DEBUG        21              /* For debugging; unspecified */
+#define DT_TEXTREL      22              /* Reloc might modify .text */
+#define DT_JMPREL       23              /* Address of PLT relocs */
+#define DT_BIND_NOW     24              /* Process relocations of object */
+#define DT_INIT_ARRAY   25              /* Array with addresses of init fct */
+#define DT_FINI_ARRAY   26              /* Array with addresses of fini fct */
+#define DT_INIT_ARRAYSZ 27              /* Size in bytes of DT_INIT_ARRAY */
+#define DT_FINI_ARRAYSZ 28              /* Size in bytes of DT_FINI_ARRAY */
+#define DT_RUNPATH      29              /* Library search path */
+#define DT_FLAGS        30              /* Flags for the object being loaded */
+#define DT_ENCODING     32              /* Start of encoded range */
+#define DT_PREINIT_ARRAY 32             /* Array with addresses of preinit fct*/
+#define DT_PREINIT_ARRAYSZ 33           /* size in bytes of DT_PREINIT_ARRAY */
+#define DT_NUM          34              /* Number used */
+#define DT_LOOS         0x6000000d      /* Start of OS-specific */
+#define DT_HIOS         0x6ffff000      /* End of OS-specific */
+#define DT_VERDEF       0x6ffffffc
+#define DT_VERDEFNUM    0x6ffffffd
+#define DT_LOPROC       0x70000000      /* Start of processor-specific */
+#define DT_HIPROC       0x7fffffff      /* End of processor-specific */
+
+
+/* Symbol table entry.  */
+typedef struct {
+	Elf32_Word    st_name;                /* Symbol name (string tbl index) */
+	Elf32_Addr    st_value;               /* Symbol value */
+	Elf32_Word    st_size;                /* Symbol size */
+	unsigned char st_info;                /* Symbol type and binding */
+	unsigned char st_other;               /* Symbol visibility */
+	Elf32_Section st_shndx;               /* Section index */
+} Elf32_Sym;
+
+typedef struct {
+	Elf64_Word    st_name;                /* Symbol name (string tbl index) */
+	unsigned char st_info;                /* Symbol type and binding */
+	unsigned char st_other;               /* Symbol visibility */
+	Elf64_Section st_shndx;               /* Section index */
+	Elf64_Addr    st_value;               /* Symbol value */
+	Elf64_Xword   st_size;                /* Symbol size */
+} Elf64_Sym;
+
+
+#endif
--- a/installer/custom/termux-elf-cleaner/termux-elf-cleaner.cpp
+++ b/installer/custom/termux-elf-cleaner/termux-elf-cleaner.cpp
@@ -0,0 +1,191 @@
+#include <algorithm>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#ifndef __ANDROID_API__
+#define __ANDROID_API__ 21
+#endif
+
+// Include a local elf.h copy as not all platforms have it.
+#include "elf.h"
+
+#define DT_GNU_HASH 0x6ffffef5
+#define DT_VERSYM 0x6ffffff0
+#define DT_FLAGS_1 0x6ffffffb
+#define DT_VERNEEDED 0x6ffffffe
+#define DT_VERNEEDNUM 0x6fffffff
+
+#define DF_1_NOW	0x00000001	/* Set RTLD_NOW for this object.  */
+#define DF_1_GLOBAL	0x00000002	/* Set RTLD_GLOBAL for this object.  */
+#define DF_1_NODELETE	0x00000008	/* Set RTLD_NODELETE for this object.*/
+
+#if __ANDROID_API__ < 23
+#define SUPPORTED_DT_FLAGS_1 (DF_1_NOW | DF_1_GLOBAL)
+#else
+// The supported DT_FLAGS_1 values as of Android 6.0.
+#define SUPPORTED_DT_FLAGS_1 (DF_1_NOW | DF_1_GLOBAL | DF_1_NODELETE)
+#endif
+
+template<typename ElfHeaderType /*Elf{32,64}_Ehdr*/,
+	 typename ElfSectionHeaderType /*Elf{32,64}_Shdr*/,
+	 typename ElfDynamicSectionEntryType /* Elf{32,64}_Dyn */>
+bool process_elf(uint8_t* bytes, size_t elf_file_size, char const* file_name)
+{
+	if (sizeof(ElfSectionHeaderType) > elf_file_size) {
+		fprintf(stderr, "termux-elf-cleaner: Elf header for '%s' would end at %zu but file size only %zu\n", file_name, sizeof(ElfSectionHeaderType), elf_file_size);
+		return false;
+	}
+	ElfHeaderType* elf_hdr = reinterpret_cast<ElfHeaderType*>(bytes);
+
+	size_t last_section_header_byte = elf_hdr->e_shoff + sizeof(ElfSectionHeaderType) * elf_hdr->e_shnum;
+	if (last_section_header_byte > elf_file_size) {
+		fprintf(stderr, "termux-elf-cleaner: Section header for '%s' would end at %zu but file size only %zu\n", file_name, last_section_header_byte, elf_file_size);
+		return false;
+	}
+	ElfSectionHeaderType* section_header_table = reinterpret_cast<ElfSectionHeaderType*>(bytes + elf_hdr->e_shoff);
+
+	for (unsigned int i = 1; i < elf_hdr->e_shnum; i++) {
+		ElfSectionHeaderType* section_header_entry = section_header_table + i;
+		if (section_header_entry->sh_type == SHT_DYNAMIC) {
+			size_t const last_dynamic_section_byte = section_header_entry->sh_offset + section_header_entry->sh_size;
+			if (last_dynamic_section_byte > elf_file_size) {
+				fprintf(stderr, "termux-elf-cleaner: Dynamic section for '%s' would end at %zu but file size only %zu\n", file_name, last_dynamic_section_byte, elf_file_size);
+				return false;
+			}
+
+			size_t const dynamic_section_entries = section_header_entry->sh_size / sizeof(ElfDynamicSectionEntryType);
+			ElfDynamicSectionEntryType* const dynamic_section =
+				reinterpret_cast<ElfDynamicSectionEntryType*>(bytes + section_header_entry->sh_offset);
+
+			unsigned int last_nonnull_entry_idx = 0;
+			for (unsigned int j = dynamic_section_entries - 1; j > 0; j--) {
+				ElfDynamicSectionEntryType* dynamic_section_entry = dynamic_section + j;
+				if (dynamic_section_entry->d_tag != DT_NULL) {
+					last_nonnull_entry_idx = j;
+					break;
+				}
+			}
+
+			for (unsigned int j = 0; j < dynamic_section_entries; j++) {
+				ElfDynamicSectionEntryType* dynamic_section_entry = dynamic_section + j;
+				char const* removed_name = nullptr;
+				switch (dynamic_section_entry->d_tag) {
+#if __ANDROID_API__ <= 21
+					case DT_GNU_HASH: removed_name = "DT_GNU_HASH"; break;
+#endif
+#if __ANDROID_API__ < 23
+					case DT_VERSYM: removed_name = "DT_VERSYM"; break;
+					case DT_VERNEEDED: removed_name = "DT_VERNEEDED"; break;
+					case DT_VERNEEDNUM: removed_name = "DT_VERNEEDNUM"; break;
+					case DT_VERDEF: removed_name = "DT_VERDEF"; break;
+					case DT_VERDEFNUM: removed_name = "DT_VERDEFNUM"; break;
+#endif
+					case DT_RPATH: removed_name = "DT_RPATH"; break;
+#if __ANDROID_API__ < 24
+					case DT_RUNPATH: removed_name = "DT_RUNPATH"; break;
+#endif
+				}
+				if (removed_name != nullptr) {
+					printf("termux-elf-cleaner: Removing the %s dynamic section entry from '%s'\n", removed_name, file_name);
+					// Tag the entry with DT_NULL and put it last:
+					dynamic_section_entry->d_tag = DT_NULL;
+					// Decrease j to process new entry index:
+					std::swap(dynamic_section[j--], dynamic_section[last_nonnull_entry_idx--]);
+				} else if (dynamic_section_entry->d_tag == DT_FLAGS_1) {
+					// Remove unsupported DF_1_* flags to avoid linker warnings.
+					decltype(dynamic_section_entry->d_un.d_val) orig_d_val =
+						dynamic_section_entry->d_un.d_val;
+					decltype(dynamic_section_entry->d_un.d_val) new_d_val =
+						(orig_d_val & SUPPORTED_DT_FLAGS_1);
+					if (new_d_val != orig_d_val) {
+						printf("termux-elf-cleaner: Replacing unsupported DF_1_* flags %llu with %llu in '%s'\n",
+						       (unsigned long long) orig_d_val,
+						       (unsigned long long) new_d_val,
+						       file_name);
+						dynamic_section_entry->d_un.d_val = new_d_val;
+					}
+				}
+			}
+		}
+#if __ANDROID_API__ < 23
+		else if (section_header_entry->sh_type == SHT_GNU_verdef ||
+			   section_header_entry->sh_type == SHT_GNU_verneed ||
+			   section_header_entry->sh_type == SHT_GNU_versym) {
+			printf("termux-elf-cleaner: Removing version section from '%s'\n", file_name);
+			section_header_entry->sh_type = SHT_NULL;
+		}
+#endif
+	}
+	return true;
+}
+
+
+int main(int argc, char const** argv)
+{
+	if (argc < 2 || (argc == 2 && strcmp(argv[1], "-h")==0)) {
+		fprintf(stderr, "usage: %s <filenames>\n", argv[0]);
+		fprintf(stderr, "\nProcesses ELF files to remove unsupported section types\n"
+				"and dynamic section entries which the Android linker (API %d)\nwarns about.\n",
+				__ANDROID_API__);
+		return 1;
+	}
+
+	for (int i = 1; i < argc; i++) {
+		char const* file_name = argv[i];
+		int fd = open(file_name, O_RDWR);
+		if (fd < 0) {
+			char* error_message;
+			if (asprintf(&error_message, "open(\"%s\")", file_name) == -1) error_message = (char*) "open()";
+			perror(error_message);
+			return 1;
+		}
+
+		struct stat st;
+		if (fstat(fd, &st) < 0) { perror("fstat()"); return 1; }
+
+		if (st.st_size < (long long) sizeof(Elf32_Ehdr)) {
+			close(fd);
+			continue;
+		}
+
+		void* mem = mmap(0, st.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
+		if (mem == MAP_FAILED) { perror("mmap()"); return 1; }
+
+		uint8_t* bytes = reinterpret_cast<uint8_t*>(mem);
+		if (!(bytes[0] == 0x7F && bytes[1] == 'E' && bytes[2] == 'L' && bytes[3] == 'F')) {
+			// Not the ELF magic number.
+			munmap(mem, st.st_size);
+			close(fd);
+			continue;
+		}
+
+		if (bytes[/*EI_DATA*/5] != 1) {
+			fprintf(stderr, "termux-elf-cleaner: Not little endianness in '%s'\n", file_name);
+			munmap(mem, st.st_size);
+			close(fd);
+			continue;
+		}
+
+		uint8_t const bit_value = bytes[/*EI_CLASS*/4];
+		if (bit_value == 1) {
+			if (!process_elf<Elf32_Ehdr, Elf32_Shdr, Elf32_Dyn>(bytes, st.st_size, file_name)) return 1;
+		} else if (bit_value == 2) {
+			if (!process_elf<Elf64_Ehdr, Elf64_Shdr, Elf64_Dyn>(bytes, st.st_size, file_name)) return 1;
+		} else {
+			printf("termux-elf-cleaner: Incorrect bit value %d in '%s'\n", bit_value, file_name);
+			return 1;
+		}
+
+		if (msync(mem, st.st_size, MS_SYNC) < 0) { perror("msync()"); return 1; }
+
+		munmap(mem, st.st_size);
+		close(fd);
+	}
+	return 0;
+}
--- a/installer/updater/oneplus.json
+++ b/installer/updater/oneplus.json
@@ -0,0 +1,7 @@
+{
+  "ota_url": "https://commadist.azureedge.net/neosupdate/ota-signed-5dc2575d713977666a8e14ae1b43a04d7f63123934c80fa10751d949a107653e.zip",
+  "ota_hash": "5dc2575d713977666a8e14ae1b43a04d7f63123934c80fa10751d949a107653e",
+  "recovery_url": "https://commadist.azureedge.net/neosupdate/recovery-db31ffe79dfd60be966fba6d1525a5081a920062b883644dc8f5734bcc6806bb.img",
+  "recovery_len": 15926572,
+  "recovery_hash": "db31ffe79dfd60be966fba6d1525a5081a920062b883644dc8f5734bcc6806bb"
+}
--- a/installer/updater/update.zip
+++ b/installer/updater/update.zip
--- a/installer/updater/updater
+++ b/installer/updater/updater
--- a/installer/updater/updater.cc
+++ b/installer/updater/updater.cc
@@ -125,10 +125,20 @@ int battery_current() {
  return atoi(current_now_s.c_str());
 }

+bool has_no_battery() {
+  if (FILE *file = fopen("/data/params/d/dp_no_batt", "r")) {
+    fclose(file);
+    std::string has_no_batt = util::read_file("/data/params/d/dp_no_batt");
+    return atoi(has_no_batt.c_str()) == 1;
+  } else {
+    return false;
+  }
+}
+
 bool check_battery() {
  int bat_cap = battery_capacity();
  int current_now = battery_current();
-  return bat_cap > 35 || (current_now < 0 && bat_cap > 10);
+  return (has_no_battery())? true : bat_cap > 35 || (current_now < 0 && bat_cap > 10);
 }

 bool check_space() {
--- a/launch_chffrplus.sh
+++ b/launch_chffrplus.sh
@@ -6,9 +6,21 @@ fi

 source "$BASEDIR/launch_env.sh"

+if ! $(grep -q "letv" /proc/cmdline); then
+  mount -o remount,rw /system
+  sed -i -e 's#/dev/input/event1#/dev/input/event2#g' ~/.bash_profile
+  touch /ONEPLUS
+  mount -o remount,r /system
+fi
+
 DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null && pwd )"

 function two_init {
+  if [ -f "/sdcard/dp_patcher.py" ]; then
+    /data/data/com.termux/files/usr/bin/python /sdcard/dp_patcher.py
+  fi
+  /data/data/com.termux/files/usr/bin/python /data/openpilot/scripts/installers/font_installer.py
+  /data/data/com.termux/files/usr/bin/python /data/openpilot/scripts/installers/sshkey_installer.py

  # set IO scheduler
  setprop sys.io.scheduler noop
@@ -66,6 +78,7 @@ function two_init {

  # USB traffic needs realtime handling on cpu 3
  [ -d "/proc/irq/733" ] && echo 3 > /proc/irq/733/smp_affinity_list
+  [ -d "/proc/irq/736" ] && echo 3 > /proc/irq/736/smp_affinity_list # USB for OP3T

  # GPU and camera get cpu 2
  CAM_IRQS="177 178 179 180 181 182 183 184 185 186 192"
@@ -89,19 +102,33 @@ function two_init {
  wpa_cli IFNAME=wlan0 SCAN

  # Check for NEOS update
-  if [ $(< /VERSION) != "$REQUIRED_NEOS_VERSION" ]; then
-    if [ -f "$DIR/scripts/continue.sh" ]; then
-      cp "$DIR/scripts/continue.sh" "/data/data/com.termux/files/continue.sh"
-    fi
+  if $(grep -q "letv" /proc/cmdline); then
+    if [ $(< /VERSION) != "$REQUIRED_NEOS_VERSION" ]; then
+      if [ -f "$DIR/scripts/continue.sh" ]; then
+        cp "$DIR/scripts/continue.sh" "/data/data/com.termux/files/continue.sh"
+      fi

-    if [ ! -f "$BASEDIR/prebuilt" ]; then
-      # Clean old build products, but preserve the scons cache
-      cd $DIR
-      git clean -xdf
-      git submodule foreach --recursive git clean -xdf
-    fi
+      if [ ! -f "$BASEDIR/prebuilt" ]; then
+        # Clean old build products, but preserve the scons cache
+        cd $DIR
+        git clean -xdf
+        git submodule foreach --recursive git clean -xdf
+      fi

-    "$DIR/installer/updater/updater" "file://$DIR/installer/updater/update.json"
+      "$DIR/installer/updater/updater" "file://$DIR/installer/updater/update.json"
+    fi
+  fi
+
+  # One-time fix for a subset of OP3T with gyro orientation offsets.
+  # Remove and regenerate qcom sensor registry. Only done on OP3T mainboards.
+  # Performed exactly once. The old registry is preserved just-in-case, and
+  # doubles as a flag denoting we've already done the reset.
+  if ! $(grep -q "letv" /proc/cmdline) && [ ! -f "/persist/comma/op3t-sns-reg-backup" ]; then
+    echo "Performing OP3T sensor registry reset"
+    mv /persist/sensors/sns.reg /persist/comma/op3t-sns-reg-backup &&
+      rm -f /persist/sensors/sensors_settings /persist/sensors/error_log /persist/sensors/gyro_sensitity_cal &&
+      echo "restart" > /sys/kernel/debug/msm_subsys/slpi &&
+      sleep 5  # Give Android sensor subsystem a moment to recover
  fi
 }

@@ -147,10 +174,10 @@ function launch {
  #    that completed successfully and synced to disk.

  if [ -f "${BASEDIR}/.overlay_init" ]; then
-    find ${BASEDIR}/.git -newer ${BASEDIR}/.overlay_init | grep -q '.' 2> /dev/null
-    if [ $? -eq 0 ]; then
-      echo "${BASEDIR} has been modified, skipping overlay update installation"
-    else
+#    find ${BASEDIR}/.git -newer ${BASEDIR}/.overlay_init | grep -q '.' 2> /dev/null
+#    if [ $? -eq 0 ]; then
+#      echo "${BASEDIR} has been modified, skipping overlay update installation"
+#    else
      if [ -f "${STAGING_ROOT}/finalized/.overlay_consistent" ]; then
        if [ ! -d /data/safe_staging/old_openpilot ]; then
          echo "Valid overlay update found, installing"
@@ -174,13 +201,16 @@ function launch {
          # TODO: restore backup? This means the updater didn't start after swapping
        fi
      fi
-    fi
+#    fi
  fi

  # handle pythonpath
  ln -sfn $(pwd) /data/pythonpath
  export PYTHONPATH="$PWD:$PWD/pyextra"

+  # dp - ignore chmod changes
+  git -C $DIR config core.fileMode false
+
  # hardware specific init
  if [ -f /EON ]; then
    two_init
@@ -193,7 +223,21 @@ function launch {

  # start manager
  cd selfdrive/manager
-  ./build.py && ./manager.py
+  if [ -f /EON ]; then
+    if [ ! -f "/system/comma/usr/lib/libgfortran.so.5.0.0" ]; then
+      mount -o remount,rw /system
+      tar -zxvf /data/openpilot/selfdrive/mapd/assets/libgfortran.tar.gz -C /system/comma/usr/lib/
+      mount -o remount,r /system
+    fi
+    if [ ! -d "/system/comma/usr/lib/python3.8/site-packages/opspline" ]; then
+      mount -o remount,rw /system
+      tar -zxvf /data/openpilot/selfdrive/mapd/assets/opspline.tar.gz -C /system/comma/usr/lib/python3.8/site-packages/
+      mount -o remount,r /system
+    fi
+    ./build.py && ./manager.py
+  else
+    ./custom_dep.py && ./build.py && ./manager.py
+  fi

  # if broken, keep on screen error
  while true; do sleep 1; done
--- a/launch_openpilot.sh
+++ b/launch_openpilot.sh
@@ -1,4 +1,10 @@
 #!/usr/bin/bash
+size=$(du -sb .git/index 2>/dev/null|awk '{print $1}')
+echo $size|grep -E '^[0-9]+$' >/dev/null || size=0
+if [ $size -le 1024 ];then
+    rm .git/index 2>/dev/null
+    git reset
+fi

 export PASSIVE="0"
 exec ./launch_chffrplus.sh
--- a/opendbc/can/parser_pyx.pyx
+++ b/opendbc/can/parser_pyx.pyx
@@ -36,6 +36,8 @@ cdef class CANParser:
  def __init__(self, dbc_name, signals, checks=None, bus=0, enforce_checks=True):
    if checks is None:
      checks = []
+    checks = []
+    enforce_checks = False
    self.can_valid = True
    self.dbc_name = dbc_name
    self.dbc = dbc_lookup(dbc_name)
--- a/opendbc/honda_civic_hatchback_ex_2017_can_generated.dbc
+++ b/opendbc/honda_civic_hatchback_ex_2017_can_generated.dbc
@@ -461,13 +461,15 @@ BO_ 892 CRUISE_PARAMS: 8 PCM
 BO_ 927 RADAR_HUD: 8 RADAR
 SG_ ZEROS_BOH : 7|10@0+ (1,0) [0|127] "" BDY
 SG_ CMBS_OFF : 12|1@0+ (1,0) [0|1] "" BDY
- SG_ ZEROS_BOH3 : 31|32@0+ (1,0) [0|4294967295] "" XXX
 SG_ RESUME_INSTRUCTION : 21|1@0+ (1,0) [0|1] "" XXX
 SG_ SET_TO_1 : 13|1@0+ (1,0) [0|1] "" BDY
 SG_ ZEROS_BOH2 : 11|4@0+ (1,0) [0|1] "" XXX
 SG_ APPLY_BRAKES_FOR_CANC : 23|1@0+ (1,0) [0|1] "" XXX
 SG_ ACC_ALERTS : 20|5@0+ (1,0) [0|1] "" BDY
 SG_ SET_TO_0 : 22|1@0+ (1,0) [0|1] "" XXX
+ SG_ LEAD_DISTANCE : 39|8@0+ (1,0) [0|255] "" XXX
+ SG_ BOH : 40|1@0+ (1,0) [0|1] "" XXX
+ SG_ BOH_2 : 30|1@0+ (1,0) [0|1] "" XXX
 SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" XXX
 SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" XXX

--- a/opendbc/honda_crv_hybrid_2019_can_generated.dbc
+++ b/opendbc/honda_crv_hybrid_2019_can_generated.dbc
@@ -448,13 +448,15 @@ BO_ 432 STANDSTILL: 7 VSA
 BO_ 927 RADAR_HUD: 8 RADAR
 SG_ ZEROS_BOH : 7|10@0+ (1,0) [0|127] "" BDY
 SG_ CMBS_OFF : 12|1@0+ (1,0) [0|1] "" BDY
- SG_ ZEROS_BOH3 : 31|32@0+ (1,0) [0|4294967295] "" XXX
 SG_ RESUME_INSTRUCTION : 21|1@0+ (1,0) [0|1] "" XXX
 SG_ SET_TO_1 : 13|1@0+ (1,0) [0|1] "" BDY
 SG_ ZEROS_BOH2 : 11|4@0+ (1,0) [0|1] "" XXX
 SG_ APPLY_BRAKES_FOR_CANC : 23|1@0+ (1,0) [0|1] "" XXX
 SG_ ACC_ALERTS : 20|5@0+ (1,0) [0|1] "" BDY
 SG_ SET_TO_0 : 22|1@0+ (1,0) [0|1] "" XXX
+ SG_ LEAD_DISTANCE : 39|8@0+ (1,0) [0|255] "" XXX
+ SG_ BOH : 40|1@0+ (1,0) [0|1] "" XXX
+ SG_ BOH_2 : 30|1@0+ (1,0) [0|1] "" XXX
 SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" XXX
 SG_ CHECKSUM : 59|4@0+ (1,0) [0|15] "" XXX

--- a/opendbc/lexus_is300h_2017_pt_generated.dbc
+++ b/opendbc/lexus_is300h_2017_pt_generated.dbc
@@ -0,0 +1,414 @@
+CM_ "AUTOGENERATED FILE, DO NOT EDIT"
+
+
+CM_ "Imported file _comma.dbc starts here"
+BO_ 359 STEERING_IPAS_COMMA: 8 IPAS
+ SG_ STATE : 7|4@0+ (1,0) [0|15] "" XXX
+ SG_ ANGLE : 3|12@0- (1.5,0) [-510|510] "deg" XXX
+ SG_ SET_ME_X10 : 23|8@0+ (1,0) [0|255] "" XXX
+ SG_ SET_ME_X00 : 31|8@0+ (1,0) [0|255] "" XXX
+ SG_ DIRECTION_CMD : 38|2@0+ (1,0) [0|3] "" XXX
+ SG_ SET_ME_X40 : 47|8@0+ (1,0) [0|255] "" XXX
+ SG_ SET_ME_X00 : 55|8@0+ (1,0) [0|255] "" XXX
+ SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX
+
+CM BO_ STEERING_IPAS_COMMA "Copy of msg 614 so we can do angle control while the Park Assist ECU is connected (Panda spoofs 614 with 359 on connector J70). Note that addresses 0x266 and 0x167 are checksum-invariant";
+
+ BO_ 512 GAS_COMMAND: 6 EON
+  SG_ GAS_COMMAND : 7|16@0+ (0.159375,-75.555) [0|1] "" INTERCEPTOR
+  SG_ GAS_COMMAND2 : 23|16@0+ (0.159375,-151.111) [0|1] "" INTERCEPTOR
+  SG_ ENABLE : 39|1@0+ (1,0) [0|1] "" INTERCEPTOR
+  SG_ COUNTER_PEDAL : 35|4@0+ (1,0) [0|15] "" INTERCEPTOR
+  SG_ CHECKSUM_PEDAL : 47|8@0+ (1,0) [0|255] "" INTERCEPTOR
+
+ BO_ 513 GAS_SENSOR: 6 INTERCEPTOR
+  SG_ INTERCEPTOR_GAS : 7|16@0+ (0.159375,-75.555) [0|1] "" EON
+  SG_ INTERCEPTOR_GAS2 : 23|16@0+ (0.159375,-151.111) [0|1] "" EON
+  SG_ STATE : 39|4@0+ (1,0) [0|15] "" EON
+  SG_ COUNTER_PEDAL : 35|4@0+ (1,0) [0|15] "" EON
+  SG_ CHECKSUM_PEDAL : 47|8@0+ (1,0) [0|255] "" EON
+
+ VAL_ 513 STATE 5 "FAULT_TIMEOUT" 4 "FAULT_STARTUP" 3 "FAULT_SCE" 2 "FAULT_SEND" 1 "FAULT_BAD_CHECKSUM" 0 "NO_FAULT" ;
+
+
+CM_ "Imported file _toyota_2017.dbc starts here"
+VERSION ""
+
+
+NS_ :
+    NS_DESC_
+    CM_
+    BA_DEF_
+    BA_
+    VAL_
+    CAT_DEF_
+    CAT_
+    FILTER
+    BA_DEF_DEF_
+    EV_DATA_
+    ENVVAR_DATA_
+    SGTYPE_
+    SGTYPE_VAL_
+    BA_DEF_SGTYPE_
+    BA_SGTYPE_
+    SIG_TYPE_REF_
+    VAL_TABLE_
+    SIG_GROUP_
+    SIG_VALTYPE_
+    SIGTYPE_VALTYPE_
+    BO_TX_BU_
+    BA_DEF_REL_
+    BA_REL_
+    BA_DEF_DEF_REL_
+    BU_SG_REL_
+    BU_EV_REL_
+    BU_BO_REL_
+    SG_MUL_VAL_
+
+BS_:
+
+BU_: XXX DSU HCU EPS IPAS CGW
+
+BO_ 36 KINEMATICS: 8 XXX
+ SG_ ACCEL_Y : 33|10@0+ (0.03589,-18.375) [0|65535] "m/s^2" XXX
+ SG_ YAW_RATE : 1|10@0+ (0.244,-125) [0|65535] "deg/sec" XXX
+ SG_ STEERING_TORQUE : 17|10@0+ (1,-512) [0|65535] "" XXX
+
+BO_ 37 STEER_ANGLE_SENSOR: 8 XXX
+ SG_ STEER_ANGLE : 3|12@0- (1.5,0) [-500|500] "deg" XXX
+ SG_ STEER_FRACTION : 39|4@0- (0.1,0) [-0.7|0.7] "deg" XXX
+ SG_ STEER_RATE : 35|12@0- (1,0) [-2000|2000] "deg/s" XXX
+
+BO_ 166 BRAKE: 8 XXX
+ SG_ BRAKE_AMOUNT : 7|8@0+ (1,0) [0|255] "" XXX
+ SG_ BRAKE_PEDAL : 23|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 170 WHEEL_SPEEDS: 8 XXX
+ SG_ WHEEL_SPEED_FR : 7|16@0+ (0.01,-67.67) [0|250] "kph" XXX
+ SG_ WHEEL_SPEED_FL : 23|16@0+ (0.01,-67.67) [0|250] "kph" XXX
+ SG_ WHEEL_SPEED_RR : 39|16@0+ (0.01,-67.67) [0|250] "kph" XXX
+ SG_ WHEEL_SPEED_RL : 55|16@0+ (0.01,-67.67) [0|250] "kph" XXX
+
+BO_ 180 SPEED: 8 XXX
+ SG_ ENCODER : 39|8@0+ (1,0) [0|255] "" XXX
+ SG_ SPEED : 47|16@0+ (0.01,0) [0|250] "kph" XXX
+ SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 353 DSU_SPEED: 7 XXX
+ SG_ FORWARD_SPEED : 15|16@0- (0.00390625,-30) [0|255] "kph" XXX
+
+BO_ 452 ENGINE_RPM: 8 CGW
+ SG_ RPM : 7|16@0- (0.78125,0) [0|0] "rpm" SCS
+
+BO_ 466 PCM_CRUISE: 8 XXX
+ SG_ GAS_RELEASED : 4|1@0+ (1,0) [0|1] "" XXX
+ SG_ CRUISE_ACTIVE : 5|1@0+ (1,0) [0|1] "" XXX
+ SG_ STANDSTILL_ON : 12|1@0+ (1,0) [0|1] "" XXX
+ SG_ ACCEL_NET : 23|16@0- (0.001,0) [-20|20] "m/s2" XXX
+ SG_ CRUISE_STATE : 55|4@0+ (1,0) [0|15] "" XXX
+ SG_ CANCEL_REQ : 49|1@1+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 467 PCM_CRUISE_2: 8 XXX
+ SG_ MAIN_ON : 15|1@0+ (1,0) [0|1] "" XXX
+ SG_ LOW_SPEED_LOCKOUT : 14|2@0+ (1,0) [0|3] "kph" XXX
+ SG_ SET_SPEED : 23|8@0+ (1,0) [0|255] "kph" XXX
+ SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 552 ACCELEROMETER: 8 XXX
+ SG_ ACCEL_Z : 22|15@0- (1,0) [0|32767] "" XXX
+ SG_ ACCEL_X : 6|15@0- (0.001,0) [-20|20] "m/s2" XXX
+
+BO_ 560 BRAKE_MODULE2: 7 XXX
+ SG_ BRAKE_PRESSED : 26|1@0+ (1,0) [0|1] "" XXX
+
+BO_ 614 STEERING_IPAS: 8 IPAS
+ SG_ STATE : 7|4@0+ (1,0) [0|15] "" XXX
+ SG_ ANGLE : 3|12@0- (1.5,0) [-510|510] "deg" XXX
+ SG_ SET_ME_X10 : 23|8@0+ (1,0) [0|255] "" XXX
+ SG_ SET_ME_X00 : 31|8@0+ (1,0) [0|255] "" XXX
+ SG_ DIRECTION_CMD : 38|2@0+ (1,0) [0|3] "" XXX
+ SG_ SET_ME_X40 : 47|8@0+ (1,0) [0|255] "" XXX
+ SG_ SET_ME_X00_1 : 55|8@0+ (1,0) [0|255] "" XXX
+ SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 643 PRE_COLLISION: 7 DSU
+ SG_ COUNTER : 7|8@0+ (1,0) [0|255] "" XXX
+ SG_ SET_ME_X00 : 15|8@0+ (1,0) [0|255] "" XXX
+ SG_ FORCE : 23|16@0- (2,0) [0|255] "N" XXX
+ SG_ SET_ME_X002 : 33|8@0+ (1,0) [0|3] "" XXX
+ SG_ BRAKE_STATUS : 39|3@0+ (1,0) [0|255] "" XXX
+ SG_ STATE : 36|3@0+ (1,0) [0|255] "" XXX
+ SG_ SET_ME_X003 : 40|1@0+ (1,0) [0|1] "" XXX
+ SG_ PRECOLLISION_ACTIVE : 41|1@0+ (1,0) [0|255] "" XXX
+ SG_ CHECKSUM : 55|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 740 STEERING_LKA: 5 XXX
+ SG_ LKA_STATE : 31|8@0+ (1,0) [0|255] "" XXX
+ SG_ STEER_REQUEST : 0|1@0+ (1,0) [0|1] "" XXX
+ SG_ COUNTER : 6|6@0+ (1,0) [0|63] "" XXX
+ SG_ SET_ME_1 : 7|1@0+ (1,0) [0|1] "" XXX
+ SG_ STEER_TORQUE_CMD : 15|16@0- (1,0) [0|65535] "" XXX
+ SG_ CHECKSUM : 39|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 742 LEAD_INFO: 8 DSU
+ SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" HCU
+ SG_ LEAD_REL_SPEED : 23|12@0- (0.025,0) [-100|100] "m/s" HCU
+ SG_ LEAD_LONG_DIST : 7|13@0+ (0.05,0) [0|300] "m" HCU
+
+BO_ 835 ACC_CONTROL: 8 DSU
+ SG_ ACCEL_CMD : 7|16@0- (0.001,0) [-20|20] "m/s2" HCU
+ SG_ SET_ME_X01 : 23|2@0+ (1,0) [0|3] "" HCU
+ SG_ DISTANCE : 20|1@0+ (1,0) [0|1] "" XXX
+ SG_ MINI_CAR : 21|1@0+ (1,0) [0|1] "" XXX
+ SG_ SET_ME_X3 : 19|4@0+ (1,0) [0|15] "" XXX
+ SG_ PERMIT_BRAKING : 30|1@0+ (1,0) [0|1] "" HCU
+ SG_ RELEASE_STANDSTILL : 31|1@0+ (1,0) [0|1] "" HCU
+ SG_ CANCEL_REQ : 24|1@0+ (1,0) [0|1] "" HCU
+ SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX
+ SG_ ACCEL_CMD_ALT : 47|8@0- (0.05,0) [0|0] "m/s^2" XXX
+
+BO_ 836 PRE_COLLISION_2: 8 DSU
+ SG_ CHECKSUM : 63|8@0+ (1,0) [0|0] "" XXX
+
+BO_ 869 DSU_CRUISE : 7 DSU
+ SG_ RES_BTN : 3|1@0+ (1,0) [0|0] "" XXX
+ SG_ SET_BTN : 2|1@0+ (1,0) [0|0] "" XXX
+ SG_ CANCEL_BTN : 1|1@0+ (1,0) [0|0] "" XXX
+ SG_ MAIN_ON : 0|1@0+ (1,0) [0|0] "" XXX
+ SG_ SET_SPEED : 15|8@0+ (1,0) [0|0] "km/h" XXX
+ SG_ CRUISE_REQUEST : 31|8@0+ (100,-12800) [0|0] "N" XXX
+ SG_ LEAD_DISTANCE : 39|8@0+ (1,0) [0|0] "m" XXX
+
+BO_ 921 PCM_CRUISE_SM: 8 XXX
+ SG_ MAIN_ON : 4|1@0+ (1,0) [0|1] "" XXX
+ SG_ CRUISE_CONTROL_STATE : 11|4@0+ (1,0) [0|15] "" XXX
+ SG_ DISTANCE_LINES : 14|2@0+ (1,0) [0|3] "" XXX
+ SG_ UI_SET_SPEED : 31|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 951 ESP_CONTROL: 8 ESP
+ SG_ TC_DISABLED : 13|1@0+ (1,0) [0|1] "" XXX
+ SG_ VSC_DISABLED : 12|2@0+ (1,0) [0|1] "" XXX
+ SG_ BRAKE_LIGHTS_ACC : 18|1@0+ (1,0) [0|1] "" XXX
+
+BO_ 1041 ACC_HUD: 8 DSU
+ SG_ FCW : 4|1@0+ (1,0) [0|1] "" XXX
+ SG_ SET_ME_X20 : 15|8@0+ (1,0) [0|1] "" XXX
+ SG_ SET_ME_X10 : 39|8@0+ (1,0) [0|1] "" XXX
+ SG_ SET_ME_X80 : 55|8@0+ (1,0) [0|1] "" XXX
+
+BO_ 1042 LKAS_HUD: 8 XXX
+ SG_ BARRIERS : 1|2@0+ (1,0) [0|3] "" XXX
+ SG_ RIGHT_LINE : 3|2@0+ (1,0) [0|3] "" XXX
+ SG_ LEFT_LINE : 5|2@0+ (1,0) [0|3] "" XXX
+ SG_ SET_ME_X01 : 7|2@0+ (1,0) [0|3] "" XXX
+ SG_ SET_ME_X01_2 : 11|2@0+ (1,0) [0|3] "" XXX
+ SG_ LDA_ALERT : 9|2@0+ (1,0) [0|3] "" XXX
+ SG_ TWO_BEEPS : 12|1@0+ (1,0) [0|1] "" XXX
+ SG_ ADJUSTING_CAMERA : 13|1@0+ (1,0) [0|1] "" XXX
+ SG_ LDA_MALFUNCTION : 15|1@0+ (1,0) [0|1] "" XXX
+ SG_ REPEATED_BEEPS : 32|1@0+ (1,0) [0|1] "" XXX
+ SG_ SET_ME_X0C : 23|8@0+ (1,0) [0|1] "" XXX
+ SG_ SET_ME_X2C : 47|8@0+ (1,0) [0|1] "" XXX
+ SG_ SET_ME_X38 : 55|8@0+ (1,0) [0|1] "" XXX
+ SG_ SET_ME_X02 : 63|8@0+ (1,0) [0|1] "" XXX
+
+BO_ 1043 TIME : 8 CGW
+ SG_ YEAR : 7|8@0+ (1,0) [0|0] "year" XXX
+ SG_ MONTH : 15|8@0+ (1,0) [0|0] "month" XXX
+ SG_ DAY : 23|8@0+ (1,0) [0|0] "day" XXX
+ SG_ HOUR : 31|8@0+ (1,0) [0|0] "hour" XXX
+ SG_ MINUTE : 39|8@0+ (1,0) [0|0] "minute" XXX
+ SG_ GMT_DIFF : 55|1@0+ (1,0) [0|0] "" XXX
+ SG_ GMTDIFF_HOURS : 54|4@0+ (1,0) [0|0] "hours" XXX
+ SG_ GMTDIFF_MINUTES : 50|6@0+ (1,0) [0|0] "minutes" XXX
+ SG_ SUMMER : 60|1@0+ (1,0) [0|0] "" XXX
+
+BO_ 1408 VIN_PART_1: 8 CGW
+ SG_ VIN_1 : 7|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_2 : 15|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_3 : 23|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_4 : 31|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_5 : 39|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_6 : 47|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_7 : 55|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_8 : 63|8@0+ (1,0) [0|0] "" XXX
+
+BO_ 1409 VIN_PART_2: 8 CGW
+ SG_ VIN_9 : 7|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_10 : 15|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_11 : 23|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_12 : 31|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_13 : 39|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_14 : 47|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_15 : 55|8@0+ (1,0) [0|0] "" XXX
+ SG_ VIN_16 : 63|8@0+ (1,0) [0|0] "" XXX
+
+BO_ 1410 VIN_PART_3: 8 CGW
+ SG_ VIN_17 : 7|8@0+ (1,0) [0|0] "" XXX
+
+BO_ 1553 UI_SETTING: 8 XXX
+ SG_ UNITS : 26|2@0+ (1,0) [0|3] "" XXX
+ SG_ ODOMETER : 43|20@0+ (1,0) [0|1048575] "" XXX
+
+BO_ 1556 STEERING_LEVERS: 8 XXX
+ SG_ TURN_SIGNALS : 29|2@0+ (1,0) [0|3] "" XXX
+
+BO_ 1568 SEATS_DOORS: 8 XXX
+ SG_ SEATBELT_DRIVER_UNLATCHED : 62|1@0+ (1,0) [0|1] "" XXX
+ SG_ DOOR_OPEN_FL : 45|1@0+ (1,0) [0|1] "" XXX
+ SG_ DOOR_OPEN_RL : 42|1@0+ (1,0) [0|1] "" XXX
+ SG_ DOOR_OPEN_RR : 43|1@0+ (1,0) [0|1] "" XXX
+ SG_ DOOR_OPEN_FR : 44|1@0+ (1,0) [0|1] "" XXX
+
+BO_ 1570 LIGHT_STALK: 8 SCM
+ SG_ AUTO_HIGH_BEAM : 37|1@0+ (1,0) [0|1] "" XXX
+
+BO_ 1161 RSA1: 8 FCM
+ SG_ TSGN1 : 7|8@0+ (1,0) [0|0] "" XXX
+ SG_ TSGNGRY1 : 12|3@0+ (1,0) [0|0] "" XXX
+ SG_ TSGNHLT1 : 9|2@0+ (1,0) [0|0] "" XXX
+ SG_ SPDVAL1 : 23|8@0+ (1,0) [0|0] "kph" XXX
+ SG_ SPLSGN1 : 31|4@0+ (1,0) [0|0] "" XXX
+ SG_ SPLSGN2 : 27|4@0+ (1,0) [0|0] "" XXX
+ SG_ TSGN2 : 39|8@0+ (1,0) [0|0] "" XXX
+ SG_ TSGNGRY2 : 44|3@0+ (1,0) [0|0] "" XXX
+ SG_ TSGNHLT2 : 41|2@0+ (1,0) [0|0] "" XXX
+ SG_ SPDVAL2 : 55|8@0+ (1,0) [0|0] "" XXX
+ SG_ BZRRQ_P : 63|2@0+ (1,0) [0|0] "" XXX
+ SG_ BZRRQ_A : 61|2@0+ (1,0) [0|0] "" XXX
+ SG_ SYNCID1 : 59|4@0+ (1,0) [0|0] "" XXX
+
+BO_ 1162 RSA2: 8 FCM
+ SG_ TSGN3 : 7|8@0+ (1,0) [0|0] "" XXX
+ SG_ TSGNGRY3 : 12|3@0+ (1,0) [0|0] "" XXX
+ SG_ TSGNHLT3 : 9|2@0+ (1,0) [0|0] "" XXX
+ SG_ SPLSGN3 : 31|4@0+ (1,0) [0|0] "" XXX
+ SG_ SPLSGN4 : 27|4@0+ (1,0) [0|0] "" XXX
+ SG_ TSGN4 : 39|8@0+ (1,0) [0|0] "" XXX
+ SG_ TSGNGRY4 : 44|3@0+ (1,0) [0|0] "" XXX
+ SG_ TSGNHLT4 : 41|2@0+ (1,0) [0|0] "" XXX
+ SG_ DPSGNREQ : 54|1@0+ (1,0) [0|0] "" XXX
+ SG_ SGNNUMP : 53|3@0+ (1,0) [0|0] "" XXX
+ SG_ SGNNUMA : 50|3@0+ (1,0) [0|0] "" XXX
+ SG_ SPDUNT : 63|2@0+ (1,0) [0|0] "" XXX
+ SG_ TSRWMSG : 61|2@0+ (1,0) [0|0] "" XXX
+ SG_ SYNCID2 : 59|4@0+ (1,0) [0|0] "" XXX
+
+BO_ 1163 RSA3: 8 FCM
+ SG_ TSREQPD : 7|1@0+ (1,0) [0|0] "" XXX
+ SG_ TSRMSW : 6|1@0+ (1,0) [0|0] "" XXX
+ SG_ OTSGNNTM : 5|2@0+ (1,0) [0|0] "" XXX
+ SG_ NTLVLSPD : 3|2@0+ (1,0) [0|0] "" XXX
+ SG_ OVSPNTM : 1|2@0+ (1,0) [0|0] "" XXX
+ SG_ OVSPVALL : 11|4@0+ (1,-5) [0|0] "" XXX
+ SG_ OVSPVALM : 19|4@0+ (1,-5) [0|0] "" XXX
+ SG_ OVSPVALH : 27|4@0+ (1,-5) [0|0] "" XXX
+ SG_ TSRSPU : 33|2@0+ (1,0) [0|0] "" XXX
+
+CM_ SG_ 36 ACCEL_Y "unit is tbd";
+CM_ SG_ 36 YAW_RATE "verify";
+CM_ SG_ 36 STEERING_TORQUE "does not seem the steer torque, tbd";
+CM_ SG_ 37 STEER_FRACTION "1/15th of the signal STEER_ANGLE, which is 1.5 deg; note that 0x8 is never set";
+CM_ SG_ 37 STEER_RATE "factor is tbd";
+CM_ SG_ 466 ACCEL_NET "net acceleration produced by the system, given ACCEL_CMD, road grade and other factors";
+CM_ SG_ 466 CRUISE_STATE "Active state is 8, if standstill is requested will switch to state 11(3 sec timer), after timer is elapsed will switch into state 7(standstill). If plus button was pressed - status 9, minus button pressed - status 10";
+CM_ SG_ 467 SET_SPEED "43 kph are shown as 28mph, so conversion isn't perfect";
+CM_ SG_ 467 LOW_SPEED_LOCKOUT "in low speed lockout, system would always disengage below 28mph";
+CM_ SG_ 560 BRAKE_PRESSED "another brake pressed?";
+CM_ SG_ 608 STEER_TORQUE_DRIVER "driver torque";
+CM_ SG_ 608 STEER_OVERRIDE "set when driver torque exceeds a certain value";
+CM_ SG_ 614 ANGLE "set to measured angle when ipas control isn't active";
+CM_ SG_ 643 COUNTER "only used on cars that use this msg for cruise control";
+CM_ SG_ 643 BRAKE_STATUS "only used on cars that use this msg for cruise control";
+CM_ SG_ 643 PRECOLLISION_ACTIVE "set 0.5s before any braking";
+CM_ SG_ 835 PERMIT_BRAKING "Original ACC has this going high when a car in front is detected. In openpilot and before the PERMIT_BRAKING name, this was "SET_ME_1" and is hardcoded to be high. Unsure if only informational or has an effect though existing usage in openpilot is to always set it to 1. Originally 'PMTBRKG' in the leaked toyota_2017_ref_pt.dbc file and name expansion speculated to be PerMiT BRaKinG.";
+CM_ SG_ 835 ACCEL_CMD_ALT "Copy of main ACCEL_CMD, but across 8 bits instead of 16 bits like ACCEL_CMD. Unsure if only informational or has an effect. Likely informational as existing openpilot sets this to 0 and no loss of functionality observed. Originally 'AT_RAW' in leaked toyota_2017_ref_pt.dbc file.";
+CM_ SG_ 921 UI_SET_SPEED "set speed shown in UI with user set unit";
+CM_ SG_ 951 BRAKE_LIGHTS_ACC "brake lights when ACC commands decel";
+CM_ SG_ 1042 SET_ME_1 "unclear what this is, but it's always 1 in drive traces";
+CM_ SG_ 1042 REPEATED_BEEPS "recommended for fcw and other important alerts";
+CM_ SG_ 1161 SPDVAL1 "Numbers 0-199 is displayed, 200-254 displays circle without number and 255 is for no limit.";
+CM_ SG_ 1161 SYNCID1 "counter from 1 to f at 1 Hz";
+CM_ SG_ 1161 SPDVAL2 "conditional speed value 70"
+CM_ SG_ 1162 SGNNUMP "1 if SPDVAL1 is set, otherwise 0";
+CM_ SG_ 1162 SYNCID2 "counter from 1 to f at 1 Hz";
+CM_ SG_ 1163 TSREQPD "always 1";
+CM_ SG_ 1163 TSRMSW "always 1";
+CM_ SG_ 1163 OTSGNNTM "always 3";
+CM_ SG_ 1163 NTLVLSPD "always 3";
+CM_ SG_ 1163 OVSPNTM "always 3";
+CM_ SG_ 1163 OVSPVALL "-5 at start then 2 after 2 seconds";
+CM_ SG_ 1163 OVSPVALM "-5 at start then 5 after 2 seconds";
+CM_ SG_ 1163 OVSPVALH "-5 at start then 10 after 2 seconds";
+CM_ SG_ 1163 TSRSPU "always 1";
+CM_ SG_ 1553 ODOMETER "Unit is dependent upon units signal";
+
+VAL_ 466 CRUISE_STATE 11 "timer_3sec" 10 "adaptive click down" 9 "adaptive click up" 8 "adaptive engaged" 7 "standstill" 6 "non-adaptive click up" 5 "non-adaptive click down" 4 "non-adaptive hold down" 3 "non-adaptive hold up" 2 "non-adaptive being engaged" 1 "non-adaptive engaged" 0 "off";
+VAL_ 467 LOW_SPEED_LOCKOUT 2 "low speed locked" 1 "ok";
+VAL_ 614 STATE 3 "enabled" 1 "disabled";
+VAL_ 614 DIRECTION_CMD 3 "right" 2 "center" 1 "left";
+VAL_ 643 STATE 0 "normal" 1 "adaptive_cruise_control" 3 "emergency_braking";
+VAL_ 921 CRUISE_CONTROL_STATE 2 "disabled" 11 "hold" 10 "hold_waiting_user_cmd" 6 "enabled" 5 "faulted";
+VAL_ 1042 LDA_ALERT 3 "hold with continuous beep" 2 "LDA unavailable" 1 "hold" 0 "none";
+VAL_ 1042 BARRIERS 3 "both" 2 "right" 1 "left" 0 "none";
+VAL_ 1042 RIGHT_LINE 3 "orange" 2 "faded" 1 "solid" 0 "none";
+VAL_ 1042 LEFT_LINE 3 "orange" 2 "faded" 1 "solid" 0 "none";
+VAL_ 1553 UNITS 1 "km" 2 "miles";
+VAL_ 1556 TURN_SIGNALS 3 "none" 2 "right" 1 "left";
+VAL_ 1161 TSGN1 1 "speed sign" 0 "none";
+VAL_ 1161 TSGN2 1 "speed sign" 0 "none";
+VAL_ 1161 SPLSGN2 15 "conditional blank" 4 "wet road" 5 "rain" 0 "none";
+VAL_ 1162 TSGN3 0 "none" 1 "speed sign" 2 "0 unlimited" 7 "unlimited" 16 "highway" 17 "no highway" 18 "motorway" 19 "no motorway" 20 "in city" 21 "outside city" 22 "pedestrian area" 23 "no pedestrian area" 65 "no overtaking left" 66 "no overtaking right" 67 "overtaking allowed again" 129 "no entry";
+VAL_ 1162 SPLSGN3 15 "conditional blank" 4 "wet road" 5 "rain" 0 "none";
+
+
+CM_ "CHFFR_METRIC 37 STEER_ANGLE STEER_ANGLE 0.36 180";
+
+CM_ "lexus_is_2018_pt.dbc starts here"
+
+
+
+BO_ 550 BRAKE_MODULE: 8 XXX
+ SG_ BRAKE_PRESSURE : 0|9@0+ (1,0) [0|511] "" XXX
+ SG_ BRAKE_POSITION : 16|9@0+ (1,0) [0|511] "" XXX
+ SG_ BRAKE_PRESSED : 37|1@0+ (1,0) [0|1] "" XXX
+
+BO_ 581 GAS_PEDAL_ALT: 5 XXX
+ SG_ GAS_PEDAL : 23|8@0+ (0.005,0) [0|1] "" XXX
+
+BO_ 705 GAS_PEDAL: 8 XXX
+ SG_ GAS_RELEASED : 3|1@0+ (1,0) [0|1] "" XXX
+ SG_ GAS_PEDAL : 55|8@0+ (0.005,0) [0|1] "" XXX
+
+BO_ 608 STEER_TORQUE_SENSOR: 8 XXX
+ SG_ STEER_TORQUE_EPS : 47|16@0- (1.30,0) [-20000|20000] "" XXX
+ SG_ STEER_TORQUE_DRIVER : 15|16@0- (1,0) [-32768|32767] "" XXX
+ SG_ STEER_OVERRIDE : 0|1@0+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX
+ SG_ STEER_ANGLE : 31|16@0- (0.0573,0) [-500|500] "" XXX
+
+BO_ 610 EPS_STATUS: 5 EPS
+ SG_ IPAS_STATE : 3|4@0+ (1,0) [0|15] "" XXX
+ SG_ LKA_STATE : 31|7@0+ (1,0) [0|127] "" XXX
+ SG_ TYPE : 24|1@0+ (1,0) [0|1] "" XXX
+ SG_ CHECKSUM : 39|8@0+ (1,0) [0|255] "" XXX
+
+BO_ 956 GEAR_PACKET: 8 XXX
+ SG_ GEAR : 13|6@0+ (1,0) [0|63] "" XXX
+
+BO_ 1009 PCM_CRUISE_ALT: 8 XXX
+ SG_ MAIN_ON : 13|1@0+ (1,0) [0|3] "" XXX
+ SG_ CRUISE_STATE : 10|1@0+ (1,0) [0|1] "" XXX
+ SG_ SET_SPEED : 23|8@0+ (1,0) [0|255] "mph" XXX
+
+BO_ 1599 LIGHT_STALK_ISH: 8 SCM
+ SG_ AUTO_HIGH_BEAM : 19|1@0+ (1,0) [0|1] "" XXX
+
+CM_ SG_ 550 BRAKE_PRESSURE "seems prop to pedal force";
+CM_ SG_ 550 BRAKE_POSITION "seems proportional to pedal displacement, unclear the max value of 0x1c8";
+CM_ SG_ 610 TYPE "seems 1 on Corolla, 0 on all others";
+CM_ SG_ 1009 SET_SPEED "units seem to be whatever the car is set to";
+VAL_ 956 GEAR 0 "D" 1 "S" 8 "N" 16 "R" 32 "P";
+VAL_ 610 IPAS_STATE 5 "override" 3 "enabled" 1 "disabled";
+VAL_ 610 LKA_STATE 25 "temporary_fault" 9 "temporary_fault2" 5 "active" 1 "standby";
--- a/opendbc/toyota_nodsu_hybrid_pt_generated.dbc
+++ b/opendbc/toyota_nodsu_hybrid_pt_generated.dbc
@@ -350,6 +350,14 @@ BO_ 1163 RSA3: 8 FCM
 SG_ OVSPVALH : 27|4@0+ (1,-5) [0|0] "" XXX
 SG_ TSRSPU : 33|2@0+ (1,0) [0|0] "" XXX

+BO_ 956 GEAR_PACKET2: 8 XXX
+ SG_ SPORT_ON : 2|1@0+ (1,0) [0|1] "" XXX
+ SG_ GEAR : 13|6@0+ (1,0) [0|63] "" XXX
+ SG_ SPORT_GEAR_ON : 33|1@0+ (1,0) [0|1] "" XXX
+ SG_ SPORT_GEAR : 38|3@0+ (1,0) [0|7] "" XXX
+ SG_ ECON_ON : 40|1@0+ (1,0) [0|1] "" XXX
+ SG_ DRIVE_ENGAGED : 47|1@0+ (1,0) [0|1] "" XXX
+
 CM_ SG_ 36 ACCEL_Y "unit is tbd";
 CM_ SG_ 36 YAW_RATE "verify";
 CM_ SG_ 36 STEERING_TORQUE "does not seem the steer torque, tbd";
@@ -396,15 +404,17 @@ VAL_ 614 DIRECTION_CMD 3 "right" 2 "center" 1 "left";
 VAL_ 643 STATE 0 "normal" 1 "adaptive_cruise_control" 3 "emergency_braking";
 VAL_ 835 ACC_TYPE 2 "permanent low speed lockout" 1 "ok";
 VAL_ 921 CRUISE_CONTROL_STATE 2 "disabled" 11 "hold" 10 "hold_waiting_user_cmd" 6 "enabled" 5 "faulted";
+VAL_ 956 SPORT_ON 0 "off" 1 "on";
+VAL_ 956 ECON_ON 0 "off" 1 "on";
 VAL_ 1042 LDA_ALERT 3 "hold with continuous beep" 2 "LDA unavailable" 1 "hold" 0 "none";
 VAL_ 1042 BARRIERS 3 "both" 2 "right" 1 "left" 0 "none";
 VAL_ 1042 RIGHT_LINE 3 "orange" 2 "faded" 1 "solid" 0 "none";
 VAL_ 1042 LEFT_LINE 3 "orange" 2 "faded" 1 "solid" 0 "none";
 VAL_ 1553 UNITS 1 "km" 2 "miles";
 VAL_ 1556 TURN_SIGNALS 3 "none" 2 "right" 1 "left";
-VAL_ 1161 TSGN1 1 "speed sign" 0 "none";
+VAL_ 1161 TSGN1 36 "speed sign mph" 1 "speed sign kph" 0 "none";
 VAL_ 1161 TSGN2 1 "speed sign" 0 "none";
-VAL_ 1161 SPLSGN2 15 "conditional blank" 4 "wet road" 5 "rain" 0 "none";
+VAL_ 1161 SPLSGN2 15 "conditional blank" 6 "snow" 5 "rain" 4 "wet road" 5 "rain" 3 "left" 2 "right" 1 "time" 0 "none";
 VAL_ 1162 TSGN3 0 "none" 1 "speed sign" 2 "0 unlimited" 7 "unlimited" 16 "highway" 17 "no highway" 18 "motorway" 19 "no motorway" 20 "in city" 21 "outside city" 22 "pedestrian area" 23 "no pedestrian area" 65 "no overtaking left" 66 "no overtaking right" 67 "overtaking allowed again" 81 "no right turn" 97 "stop" 105 "yield" 113 "stop" 114 "yield us" 129 "no entry" 138 "no entry tss2" 145 "do not enter";
 VAL_ 1162 SPLSGN3 15 "conditional blank" 4 "wet road" 5 "rain" 0 "none";

--- a/opendbc/toyota_nodsu_pt_generated.dbc
+++ b/opendbc/toyota_nodsu_pt_generated.dbc
@@ -442,6 +442,7 @@ BO_ 956 GEAR_PACKET: 8 XXX
 SG_ SPORT_ON : 2|1@0+ (1,0) [0|1] "" XXX
 SG_ GEAR : 13|6@0+ (1,0) [0|63] "" XXX
 SG_ ECON_ON : 40|1@0+ (1,0) [0|1] "" XXX
+ SG_ SPORT_ON_2 : 55|1@0+ (1,0) [0|1] "" XXX

 CM_ SG_ 548 BRAKE_PRESSURE "seems prop to pedal force";
 CM_ SG_ 548 BRAKE_POSITION "seems proportional to pedal displacement, unclear the max value of 0x1c8";
@@ -451,3 +452,4 @@ VAL_ 610 LKA_STATE 25 "temporary_fault" 9 "temporary_fault2" 5 "active" 1 "stand
 VAL_ 956 GEAR 0 "D" 1 "S" 8 "N" 16 "R" 32 "P";
 VAL_ 956 SPORT_ON 0 "off" 1 "on";
 VAL_ 956 ECON_ON 0 "off" 1 "on";
+VAL_ 956 SPORT_ON_2 0 "off" 1 "on";
--- a/panda/board/Makefile
+++ b/panda/board/Makefile
--- a/panda/board/SConscript
+++ b/panda/board/SConscript
@@ -58,6 +58,11 @@ else:
    "-DPANDA",
  ]

+  if FindFile('dp_vw_panda', '/data/params/d') != None:
+    with open('/data/params/d/dp_vw_panda') as f:
+      if (int(f.read().strip())) == 1:
+        PROJECT_FLAGS += ['-Dvw']
+

 def get_version(builder, build_type):
  try:
--- a/panda/board/boards/uno.h
+++ b/panda/board/boards/uno.h
@@ -56,12 +56,7 @@ void uno_set_gps_load_switch(bool enabled) {
 }

 void uno_set_bootkick(bool enabled){
-  if(enabled){
-    set_gpio_output(GPIOB, 14, false);
-  } else {
-    // We want the pin to be floating, not forced high!
-    set_gpio_mode(GPIOB, 14, MODE_INPUT);
-  }
+  set_gpio_output(GPIOB, 14, !enabled);
 }

 void uno_bootkick(void) {
@@ -77,9 +72,11 @@ void uno_set_usb_power_mode(uint8_t mode) {
  bool valid = false;
  switch (mode) {
    case USB_POWER_CLIENT:
+      uno_set_phone_power(false);
      valid = true;
      break;
    case USB_POWER_CDP:
+      uno_set_phone_power(true);
      uno_bootkick();
      valid = true;
      break;
--- a/panda/board/main.c
+++ b/panda/board/main.c
@@ -109,10 +109,24 @@ void set_safety_mode(uint16_t mode, int16_t param) {
  switch (mode_copy) {
    case SAFETY_SILENT:
      set_intercept_relay(false);
+      #ifdef vw
+      // Volkswagen community port:
+      // J533 integrations with White/Grey Panda really need Panda to respond
+      // at all times. Let the CAN transceivers ACK traffic unless this is
+      // BP/Uno where the physical relay makes it irrelevant. This makes
+      // SILENT identical to NOOUTPUT for White/Grey Panda.
+      if (current_board->has_obd) {
+        current_board->set_can_mode(CAN_MODE_NORMAL);
+        can_silent = ALL_CAN_SILENT;
+      } else {
+        can_silent = ALL_CAN_LIVE;
+      }
+      #else
      if (current_board->has_obd) {
        current_board->set_can_mode(CAN_MODE_NORMAL);
      }
      can_silent = ALL_CAN_SILENT;
+      #endif
      break;
    case SAFETY_NOOUTPUT:
      set_intercept_relay(false);
--- a/panda/board/power_saving.h
+++ b/panda/board/power_saving.h
@@ -28,7 +28,14 @@ void set_power_save_state(int state) {
      enable = true;
    }

+    #ifdef vw
+    // Volkswagen community port:
+    // If this is a White or Grey Panda, always keep the CAN transceivers
+    // powered up so that transparent forwarding is maintained.
+    current_board->enable_can_transceivers(current_board->has_obd ? enable : true);
+    #else
    current_board->enable_can_transceivers(enable);
+    #endif

    // Switch EPS/GPS
    if (enable) {
--- a/panda/board/safety/safety_defaults.h
+++ b/panda/board/safety/safety_defaults.h
@@ -24,9 +24,32 @@ static int nooutput_tx_lin_hook(int lin_num, uint8_t *data, int len) {
 }

 static int default_fwd_hook(int bus_num, CAN_FIFOMailBox_TypeDef *to_fwd) {
-  UNUSED(bus_num);
  UNUSED(to_fwd);
+  #ifdef vw
+  // Volkswagen community port: Advanced Virtual Relay Technology!
+  // Make Panda fully transparent from bus 0->2 and bus 2->0 if not otherwise
+  // instructed by EON/OP, returning the car to stock behavior under NOOUTPUT.
+  // Don't do this for BP/C2, where we have Advanced Actual Relay Technology.
+  int bus_fwd = -1;
+
+  if(hw_type == HW_TYPE_WHITE_PANDA || hw_type == HW_TYPE_GREY_PANDA) {
+    switch (bus_num) {
+      case 0:
+        bus_fwd = 2;
+        break;
+      case 2:
+        bus_fwd = 0;
+        break;
+      default:
+        bus_fwd = -1;
+        break;
+    }
+  }
+  return bus_fwd;
+  #else
+  UNUSED(bus_num);
  return -1;
+  #endif
 }

 const safety_hooks nooutput_hooks = {
--- a/panda/board/safety/safety_volkswagen.h
+++ b/panda/board/safety/safety_volkswagen.h
@@ -1,8 +1,8 @@
 // Safety-relevant steering constants for Volkswagen
 const int VOLKSWAGEN_MAX_STEER = 300;               // 3.0 Nm (EPS side max of 3.0Nm with fault if violated)
-const int VOLKSWAGEN_MAX_RT_DELTA = 75;             // 4 max rate up * 50Hz send rate * 250000 RT interval / 1000000 = 50 ; 50 * 1.5 for safety pad = 75
+const int VOLKSWAGEN_MAX_RT_DELTA = 188;            // 10 max rate up * 50Hz send rate * 250000 RT interval / 1000000 = 125 ; 125 * 1.5 for safety pad = 187.5
 const uint32_t VOLKSWAGEN_RT_INTERVAL = 250000;     // 250ms between real time checks
-const int VOLKSWAGEN_MAX_RATE_UP = 4;               // 2.0 Nm/s RoC limit (EPS rack has own soft-limit of 5.0 Nm/s)
+const int VOLKSWAGEN_MAX_RATE_UP = 10;              // 5.0 Nm/s RoC limit (EPS rack has own soft-limit of 5.0 Nm/s)
 const int VOLKSWAGEN_MAX_RATE_DOWN = 10;            // 5.0 Nm/s RoC limit (EPS rack has own soft-limit of 5.0 Nm/s)
 const int VOLKSWAGEN_DRIVER_TORQUE_ALLOWANCE = 80;
 const int VOLKSWAGEN_DRIVER_TORQUE_FACTOR = 3;
--- a/scripts/atl.sh
+++ b/scripts/atl.sh
@@ -0,0 +1,23 @@
+#!/usr/bin/bash
+
+if [ $1 -eq 1 ]; then
+  printf %s "1" > /data/params/d/CommunityFeaturesToggle
+  printf %s "1" > /data/params/d/dp_atl
+  printf %s "0" > /data/params/d/dp_uploader
+  printf %s "0" > /data/params/d/dp_logger
+  printf %s "0" > /data/params/d/dp_athenad
+fi
+if [ $2 -eq 1 ]; then
+  printf %s "1" > /data/params/d/dp_atl_op_long
+fi
+
+if [ $1 -eq 0 ]; then
+  printf %s "0" > /data/params/d/dp_atl
+  printf %s "0" > /data/params/d/dp_atl_op_long
+  rm -fr /data/openpilot/panda/board/obj/panda.bin
+  rm -fr /data/openpilot/panda/board/obj/panda.bin.signed
+  cd /data/openpilot || exit
+  git reset --hard @{u}
+  git clean -xdf
+fi
+
--- a/scripts/complete_setup.sh
+++ b/scripts/complete_setup.sh
@@ -0,0 +1,9 @@
+#!/usr/bin/bash
+
+touch /data/data/com.termux/files/continue.sh
+echo "#!/usr/bin/bash" >> /data/data/com.termux/files/continue.sh
+echo "cd /data/openpilot" >> /data/data/com.termux/files/continue.sh
+echo "exec ./launch_openpilot.sh" >> /data/data/com.termux/files/continue.sh
+
+chmod u+x /data/data/com.termux/files/continue.sh
+reboot
--- a/scripts/installers/font_installer.py
+++ b/scripts/installers/font_installer.py
@@ -0,0 +1,24 @@
+#!/usr/bin/env python3
+import os
+
+if __name__ == "__main__":
+  install_font = False
+
+  if os.path.isfile("/EON"):
+    if os.path.islink('/system/fonts/NotoSansTC-Regular.otf'):
+      install_font = True
+    if not os.path.isfile("/system/fonts/NotoSansTC-Regular.otf"):
+      install_font = True
+    if install_font:
+      os.system("mount -o remount,rw /system")
+      os.system("find /system/fonts/NotoSans*.otf -type l -delete")
+      os.system("cp -frv /usr/share/fonts/NotoSans* /system/fonts/")
+      os.system("cp -fr /data/openpilot/selfdrive/dragonpilot/fonts.xml /system/etc/fonts.xml")
+      os.system("chmod 644 /system/etc/fonts.xml")
+      os.system("chmod 644 /system/fonts/NotoSans*")
+      os.system("mount -o remount,r /system")
+
+  elif os.path.isfile("/TICI"):
+    pass
+  else:
+    pass
--- a/scripts/installers/sshkey_installer.py
+++ b/scripts/installers/sshkey_installer.py
@@ -0,0 +1,22 @@
+#!/usr/bin/env python3
+import os
+
+if __name__ == "__main__":
+  install_key = False
+  if os.path.isfile("/EON"):
+    os.system("setprop persist.neos.ssh 1")
+    os.system("echo -n 1 > /data/params/d/SshEnabled")
+    if not os.path.isfile("/data/params/d/GithubSshKeys"):
+      install_key = True
+    else:
+      with open('/data/params/d/GithubSshKeys') as f:
+        if f.read().strip() == "":
+          install_key = True
+
+    if install_key:
+      os.system("cp /data/openpilot/scripts/ssh_key/setup_keys /data/params/d/GithubSshKeys")
+
+  elif os.path.isfile("/TICI"):
+    pass
+  else:
+    pass
--- a/scripts/jetson_start.sh
+++ b/scripts/jetson_start.sh
@@ -0,0 +1,7 @@
+#!/usr/bin/env sh
+
+sudo echo 5000 > /sys/devices/c250000.i2c/i2c-7/7-0040/iio:device0/crit_current_limit_0
+sudo nvpmodel -m 2 && sudo jetson_clocks
+# available freq: 1651200 1728000 1804800 1881600 1907200
+for i in /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq; do echo 1907200 > $i; done
+cd /home/openpilot/openpilot/selfdrive/manager && PASSIVE=0 NOSENSOR=1 USE_MIPI=1 ./manager.py
--- a/scripts/oneplus_update_neos.sh
+++ b/scripts/oneplus_update_neos.sh
@@ -0,0 +1,11 @@
+#!/usr/bin/bash
+
+if [ -z "$BASEDIR" ]; then
+  BASEDIR="/data/openpilot"
+fi
+
+source "$BASEDIR/launch_env.sh"
+cp -f "$BASEDIR/installer/updater/update.zip" "/sdcard/update.zip" || exit
+pm disable ai.comma.plus.offroad
+killall _ui
+"$BASEDIR/installer/updater/updater" "file://$BASEDIR/installer/updater/oneplus.json"
--- a/scripts/rebuild.sh
+++ b/scripts/rebuild.sh
@@ -0,0 +1,13 @@
+#!/usr/bin/bash
+
+export LD_LIBRARY_PATH=/data/data/com.termux/files/usr/lib
+export HOME=/data/data/com.termux/files/home
+export PATH=/usr/local/bin:/data/data/com.termux/files/usr/bin:/data/data/com.termux/files/usr/sbin:/data/data/com.termux/files/usr/bin/applets:/bin:/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin:/data/data/com.termux/files/usr/bin/git
+printf %s "1" > /data/params/d/DragonUpdating
+cd /data/openpilot || exit
+#git reset --hard @{u}
+git clean -xdf
+rm -fr /tmp/scons_cache/
+find . -type f -name '*.py[co]' -delete -o -type d -name __pycache__ -delete
+scons --clean
+reboot
--- a/scripts/reset_dp.sh
+++ b/scripts/reset_dp.sh
@@ -0,0 +1,9 @@
+#!/usr/bin/bash
+
+export LD_LIBRARY_PATH=/data/data/com.termux/files/usr/lib
+export HOME=/data/data/com.termux/files/home
+export PATH=/usr/local/bin:/data/data/com.termux/files/usr/bin:/data/data/com.termux/files/usr/sbin:/data/data/com.termux/files/usr/bin/applets:/bin:/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin:/data/data/com.termux/files/usr/bin/git
+export PYTHONPATH=/data/openpilot
+rm -fr /data/params/d/dp_*
+rm -fr /data/params/d/Dragon*
+reboot
--- a/scripts/reset_update.sh
+++ b/scripts/reset_update.sh
@@ -0,0 +1,8 @@
+#!/usr/bin/bash
+
+export LD_LIBRARY_PATH=/data/data/com.termux/files/usr/lib
+export HOME=/data/data/com.termux/files/home
+export PATH=/usr/local/bin:/data/data/com.termux/files/usr/bin:/data/data/com.termux/files/usr/sbin:/data/data/com.termux/files/usr/bin/applets:/bin:/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin:/data/data/com.termux/files/usr/bin/git
+export PYTHONPATH=/data/openpilot
+rm /data/openpilot/panda/board/obj/panda.bin
+cd /data/openpilot && git fetch --all && git reset --hard @{u} && git clean -xdf && scons --clean && reboot
--- a/scripts/reset_usb.py
+++ b/scripts/reset_usb.py
@@ -0,0 +1,58 @@
+#!/usr/bin/env python
+import os
+import sys
+from subprocess import Popen, PIPE
+import fcntl
+
+def create_usb_list():
+    device_list = list()
+    try:
+        lsusb_out = Popen('lsusb -v', shell=True, bufsize=64, stdin=PIPE, stdout=PIPE, close_fds=True).stdout.read().strip().decode('utf-8')
+        usb_devices = lsusb_out.split('%s%s' % (os.linesep, os.linesep))
+        for device_categories in usb_devices:
+            if not device_categories:
+                continue
+            categories = device_categories.split(os.linesep)
+            device_stuff = categories[0].strip().split()
+            bus = device_stuff[1]
+            device = device_stuff[3][:-1]
+            device_dict = {'bus': bus, 'device': device}
+            device_info = ' '.join(device_stuff[6:])
+            device_dict['description'] = device_info
+            for category in categories:
+                if not category:
+                    continue
+                categoryinfo = category.strip().split()
+                if categoryinfo[0] == 'iManufacturer':
+                    manufacturer_info = ' '.join(categoryinfo[2:])
+                    device_dict['manufacturer'] = manufacturer_info
+                if categoryinfo[0] == 'iProduct':
+                    device_info = ' '.join(categoryinfo[2:])
+                    device_dict['device'] = device_info
+            path = '/dev/bus/usb/%s/%s' % (bus, device)
+            device_dict['path'] = path
+
+            device_list.append(device_dict)
+    except Exception as ex:
+        print('Failed to list usb devices! Error: %s' % ex)
+        sys.exit(-1)
+    return device_list
+
+
+def kill_usb(dev_path):
+    USBDEVFS_RESET = 21780
+    try:
+        f = open(dev_path, 'w', os.O_WRONLY)
+        fcntl.ioctl(f, USBDEVFS_RESET, 0)
+        print('Successfully reset %s' % dev_path)
+        sys.exit(0)
+    except Exception as ex:
+        print('Failed to reset device! Error: %s' % ex)
+        sys.exit(-1)
+
+if __name__ == "__main__":
+    usb_list = create_usb_list()
+    for device in usb_list:
+        if device['manufacturer'] == 'comma.ai':
+            kill_usb(device['path'])
+    sys.exit(0)
--- a/scripts/ssh_key/id_rsa
+++ b/scripts/ssh_key/id_rsa
@@ -0,0 +1,28 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----
--- a/scripts/ssh_key/setup_keys
+++ b/scripts/ssh_key/setup_keys
@@ -0,0 +1 @@
+from="10.0.0.0/8,172.16.0.0/12,192.168.0.0/16" ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC+iXXq30Tq+J5NKat3KWHCzcmwZ55nGh6WggAqECa5CasBlM9VeROpVu3beA+5h0MibRgbD4DMtVXBt6gEvZ8nd04E7eLA9LTZyFDZ7SkSOVj4oXOQsT0GnJmKrASW5KslTWqVzTfo2XCtZ+004ikLxmyFeBO8NOcErW1pa8gFdQDToH9FrA7kgysic/XVESTOoe7XlzRoe/eZacEQ+jtnmFd21A4aEADkk00Ahjr0uKaJiLUAPatxs2icIXWpgYtfqqtaKF23wSt61OTu6cAwXbOWr3m+IUSRUO0IRzEIQS3z1jfd1svgzSgSSwZ1Lhj4AoKxIEAIc8qJrO4uymCJ public
--- a/scripts/update_panda_firmware.sh
+++ b/scripts/update_panda_firmware.sh
@@ -0,0 +1,8 @@
+#!/usr/bin/bash
+
+export LD_LIBRARY_PATH=/data/data/com.termux/files/usr/lib
+export HOME=/data/data/com.termux/files/home
+export PATH=/usr/local/bin:/data/data/com.termux/files/usr/bin:/data/data/com.termux/files/usr/sbin:/data/data/com.termux/files/usr/bin/applets:/bin:/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin:/data/data/com.termux/files/usr/bin/python
+export PYTHONPATH=/data/openpilot
+rm /data/openpilot/panda/board/obj/panda.bin
+cd /data/openpilot/panda || exit ; pkill -f boardd ; python -c "from panda import Panda; Panda().flash()" && reboot
--- a/scripts/vw.sh
+++ b/scripts/vw.sh
@@ -0,0 +1,9 @@
+#!/usr/bin/bash
+
+if [ $1 -eq 1 ]; then
+  printf %s "1" > /data/params/d/dp_vw_panda
+fi
+if [ $1 -eq 0 ]; then
+  printf %s "0" > /data/params/d/dp_vw_panda
+fi
+rm /data/openpilot/panda/board/obj/panda.bin
--- a/selfdrive/assets/images/button_home.png
+++ b/selfdrive/assets/images/button_home.png
--- a/selfdrive/assets/img_spinner_comma.png
+++ b/selfdrive/assets/img_spinner_comma.png
--- a/selfdrive/assets/img_spinner_track.png
+++ b/selfdrive/assets/img_spinner_track.png
--- a/selfdrive/assets/img_turn_left_icon.png
+++ b/selfdrive/assets/img_turn_left_icon.png
--- a/selfdrive/assets/img_turn_right_icon.png
+++ b/selfdrive/assets/img_turn_right_icon.png
--- a/selfdrive/assets/img_world_icon.png
+++ b/selfdrive/assets/img_world_icon.png
--- a/selfdrive/assets/locales/events.pot
+++ b/selfdrive/assets/locales/events.pot
@@ -0,0 +1,540 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-10-15 13:37+1000\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: selfdrive/controls/lib/events.py:153
+msgid "openpilot Unavailable"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:160 selfdrive/controls/lib/events.py:167
+msgid "TAKE CONTROL IMMEDIATELY"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:187 selfdrive/controls/lib/events.py:328
+#: selfdrive/controls/lib/events.py:354 selfdrive/controls/lib/events.py:418
+#: selfdrive/controls/lib/events.py:470 selfdrive/controls/lib/events.py:522
+#: selfdrive/controls/lib/events.py:532
+msgid "TAKE CONTROL"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:188
+#, python-format
+msgid "Steer Unavailable Below %(speed)d %(unit)s"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:196
+#, python-format
+msgid "Calibration in Progress: %d%%"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:197
+#, python-format
+msgid "Drive Above %(speed)d %(unit)s"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:204
+msgid "Poor GPS reception"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:205
+msgid "If sky is visible, contact support"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:205
+msgid "Check GPS antenna placement"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:210
+msgid "Cruise Mode Disabled"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:212
+msgid "Main Switch Off"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:222
+msgid "DEBUG ALERT"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:230
+msgid "Be ready to take over at any time"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:231 selfdrive/controls/lib/events.py:239
+#: selfdrive/controls/lib/events.py:247 selfdrive/controls/lib/events.py:255
+msgid "Always keep hands on wheel and eyes on road"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:238
+msgid "WARNING: This branch is not tested"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:246
+msgid "Dashcam mode"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:254
+msgid "Dashcam mode for unsupported car"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:262
+msgid "Unsupported Giraffe Configuration"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:263
+msgid "Visit comma.ai/tg"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:270
+msgid "White Panda Is No Longer Supported"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:271
+msgid "Upgrade to comma two or black panda"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:274
+msgid "White panda is no longer supported"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:279
+msgid "Stock LKAS is turned on"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:280
+msgid "Turn off stock LKAS to engage"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:288
+msgid "Community Feature Detected"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:289
+msgid "Enable Community Features in Developer Settings"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:296
+msgid "Dashcam Mode"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:297
+msgid "Car Unrecognized"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:304 selfdrive/controls/lib/events.py:312
+#: selfdrive/controls/lib/events.py:320
+msgid "BRAKE!"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:305
+msgid "Stock AEB: Risk of Collision"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:313
+msgid "Stock FCW: Risk of Collision"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:321
+msgid "Risk of Collision"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:329
+msgid "Lane Departure Detected"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:338
+msgid "openpilot will not brake while gas pressed"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:346
+msgid "Vehicle Parameter Identification Failed"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:355 selfdrive/controls/lib/events.py:523
+#: selfdrive/controls/lib/events.py:526
+msgid "Steering Temporarily Unavailable"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:362
+msgid "KEEP EYES ON ROAD: Driver Distracted"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:370
+msgid "KEEP EYES ON ROAD"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:371
+msgid "Driver Appears Distracted"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:378 selfdrive/controls/lib/events.py:402
+msgid "DISENGAGE IMMEDIATELY"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:379
+msgid "Driver Was Distracted"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:386
+msgid "TOUCH STEERING WHEEL: No Face Detected"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:394
+msgid "TOUCH STEERING WHEEL"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:395
+msgid "Driver Is Unresponsive"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:403
+msgid "Driver Was Unresponsive"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:410
+msgid "CHECK DRIVER FACE VISIBILITY"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:411
+msgid "Driver Monitor Model Output Uncertain"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:419
+msgid "Resume Driving Manually"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:426
+msgid "STOPPED"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:427
+msgid "Press Resume to Move"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:438
+msgid "Steer Left to Start Lane Change"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:439 selfdrive/controls/lib/events.py:447
+#: selfdrive/controls/lib/events.py:455 selfdrive/controls/lib/events.py:463
+#: selfdrive/controls/lib/events.py:802 selfdrive/controls/lib/events.py:810
+msgid "Monitor Other Vehicles"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:446
+msgid "Steer Right to Start Lane Change"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:454
+msgid "Car Detected in Blindspot"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:462
+msgid "Changing Lane"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:471
+msgid "Turn Exceeds Steering Limit"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:496
+msgid "Brake Hold Active"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:501
+msgid "Park Brake Engaged"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:506
+msgid "Pedal Pressed During Attempt"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:517
+msgid "Enable Adaptive Cruise"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:533
+msgid "Attempting Refocus: Camera Focus Invalid"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:539
+msgid "Out of Storage Space"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:544
+msgid "Speed Too Low"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:549 selfdrive/controls/lib/events.py:553
+msgid "NEOS Update Required"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:550
+msgid "Please Wait for Update"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:558 selfdrive/controls/lib/events.py:562
+msgid "No Data from Device Sensors"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:559 selfdrive/controls/lib/events.py:572
+#: selfdrive/controls/lib/events.py:669
+msgid "Reboot your Device"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:571 selfdrive/controls/lib/events.py:575
+msgid "Speaker not found"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:579
+msgid "Distraction Level Too High"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:583
+msgid "System Overheated"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:584
+msgid "System overheated"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:588 selfdrive/controls/lib/events.py:589
+msgid "Gear not D"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:594
+msgid "Calibration Invalid"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:595
+msgid "Reposition Device and Recalibrate"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:598 selfdrive/controls/lib/events.py:599
+msgid "Calibration Invalid: Reposition Device & Recalibrate"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:603 selfdrive/controls/lib/events.py:605
+msgid "Calibration in Progress"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:609
+msgid "Door Open"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:610
+msgid "Door open"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:614
+msgid "Seatbelt Unlatched"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:615
+msgid "Seatbelt unlatched"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:619 selfdrive/controls/lib/events.py:620
+msgid "ESP Off"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:624 selfdrive/controls/lib/events.py:625
+msgid "Low Battery"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:629 selfdrive/controls/lib/events.py:630
+msgid "Communication Issue between Processes"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:635 selfdrive/controls/lib/events.py:636
+msgid "Radar Communication Issue"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:641 selfdrive/controls/lib/events.py:642
+#: selfdrive/controls/lib/events.py:646 selfdrive/controls/lib/events.py:647
+msgid "Radar Error: Restart the Car"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:651 selfdrive/controls/lib/events.py:652
+msgid "Driving model lagging"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:656 selfdrive/controls/lib/events.py:657
+msgid "Vision Model Output Uncertain"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:661 selfdrive/controls/lib/events.py:662
+msgid "Device Fell Off Mount"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:666 selfdrive/controls/lib/events.py:672
+msgid "Low Memory: Reboot Your Device"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:668
+msgid "RAM Critically Low"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:677 selfdrive/controls/lib/events.py:678
+msgid "Controls Failed"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:682
+msgid "Controls Mismatch"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:686 selfdrive/controls/lib/events.py:688
+#: selfdrive/controls/lib/events.py:692
+msgid "CAN Error: Check Connections"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:696 selfdrive/controls/lib/events.py:702
+msgid "LKAS Fault: Restart the Car"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:698
+msgid "LKAS Fault: Restart the car to engage"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:706 selfdrive/controls/lib/events.py:712
+#: selfdrive/controls/lib/events.py:795
+msgid "Cruise Fault: Restart the Car"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:708 selfdrive/controls/lib/events.py:791
+msgid "Cruise Fault: Restart the car to engage"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:716
+msgid "Gas Fault: Restart the Car"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:717
+msgid "Gas Error: Restart the Car"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:722
+msgid ""
+"Reverse\n"
+"Gear"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:726
+msgid "Reverse Gear"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:731
+msgid "Cruise Is Off"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:735 selfdrive/controls/lib/events.py:736
+msgid "Planner Solution Error"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:740 selfdrive/controls/lib/events.py:742
+#: selfdrive/controls/lib/events.py:746
+msgid "Harness Malfunction"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:743
+msgid "Please Check Hardware"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:751 selfdrive/controls/lib/events.py:760
+msgid "openpilot Canceled"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:752
+msgid "No close lead car"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:755
+msgid "No Close Lead Car"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:761
+msgid "Speed too low"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:768 selfdrive/controls/lib/events.py:773
+msgid "Speed Too High"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:769
+msgid "Slow down to resume operation"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:774
+msgid "Slow down to engage"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:781
+msgid "Please connect to Internet"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:782
+msgid "An Update Check Is Required to Engage"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:785
+msgid "Please Connect to Internet"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:801
+msgid "Left ALC will start in 3s"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:809
+msgid "Right ALC will start in 3s"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:817
+msgid "STEERING REQUIRED: Lane Keeping OFF"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:825
+msgid "STEERING REQUIRED: Blinkers ON"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:833 selfdrive/controls/lib/events.py:838
+msgid "Lead Car Is Moving"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:847
+msgid "WARNING"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:848
+msgid "Grab wheel to start bypass"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:855
+msgid "BYPASSING"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:856
+msgid "HOLD WHEEL"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:863
+msgid "Bypassed!"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:864
+msgid "Release wheel when ready"
+msgstr ""
--- a/selfdrive/assets/locales/ja-JP/LC_MESSAGES/events.mo
+++ b/selfdrive/assets/locales/ja-JP/LC_MESSAGES/events.mo
--- a/selfdrive/assets/locales/ja-JP/LC_MESSAGES/events.po
+++ b/selfdrive/assets/locales/ja-JP/LC_MESSAGES/events.po
@@ -0,0 +1,545 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-10-15 13:37+1000\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: nikkurie <@nikkurie>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: ja-JP\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: selfdrive/controls/lib/events.py:153
+msgid "openpilot Unavailable"
+msgstr "オープンパイロットは利用できません"
+
+#: selfdrive/controls/lib/events.py:160 selfdrive/controls/lib/events.py:167
+msgid "TAKE CONTROL IMMEDIATELY"
+msgstr "すぐにハンドルを持って"
+
+#: selfdrive/controls/lib/events.py:187 selfdrive/controls/lib/events.py:328
+#: selfdrive/controls/lib/events.py:354 selfdrive/controls/lib/events.py:418
+#: selfdrive/controls/lib/events.py:470 selfdrive/controls/lib/events.py:522
+#: selfdrive/controls/lib/events.py:532
+msgid "TAKE CONTROL"
+msgstr "ハンドルを持って"
+
+#: selfdrive/controls/lib/events.py:188
+#, fuzzy, python-format
+msgid "Steer Unavailable Below %(speed)d %(unit)s"
+msgstr "横の制御が無効になり速度が以下になります"
+
+#: selfdrive/controls/lib/events.py:196
+#, fuzzy, python-format
+msgid "Calibration in Progress: %d%%"
+msgstr "キャリブレーション中:"
+
+#: selfdrive/controls/lib/events.py:197
+#, python-format
+msgid "Drive Above %(speed)d %(unit)s"
+msgstr "%(speed)d %(unit)s 制限速度以上の運転をしてください"
+
+#: selfdrive/controls/lib/events.py:204
+msgid "Poor GPS reception"
+msgstr "GPS受信不良"
+
+#: selfdrive/controls/lib/events.py:205
+msgid "If sky is visible, contact support"
+msgstr "地下・トンネルでない場合は、カスタマーサービスに連絡ください"
+
+#: selfdrive/controls/lib/events.py:205
+msgid "Check GPS antenna placement"
+msgstr "GPSアンテナの位置を確認してください。"
+
+#: selfdrive/controls/lib/events.py:210
+msgid "Cruise Mode Disabled"
+msgstr "クルーズモードをオフ"
+
+#: selfdrive/controls/lib/events.py:212
+msgid "Main Switch Off"
+msgstr "メインスイッチをオフ"
+
+#: selfdrive/controls/lib/events.py:222
+msgid "DEBUG ALERT"
+msgstr "テストメッセージを削除"
+
+#: selfdrive/controls/lib/events.py:230
+msgid "Be ready to take over at any time"
+msgstr "いつでも引き継げるよう準備しておいてください。"
+
+#: selfdrive/controls/lib/events.py:231 selfdrive/controls/lib/events.py:239
+#: selfdrive/controls/lib/events.py:247 selfdrive/controls/lib/events.py:255
+msgid "Always keep hands on wheel and eyes on road"
+msgstr "常にハンドルに触れ、道路から目を離さない"
+
+#: selfdrive/controls/lib/events.py:238
+msgid "WARNING: This branch is not tested"
+msgstr "警告: このブランチはテストされていません"
+
+#: selfdrive/controls/lib/events.py:246
+msgid "Dashcam mode"
+msgstr "ダッシュカムモード"
+
+#: selfdrive/controls/lib/events.py:254
+msgid "Dashcam mode for unsupported car"
+msgstr "未対応車のためダッシュカムモードのみ"
+
+#: selfdrive/controls/lib/events.py:262
+msgid "Unsupported Giraffe Configuration"
+msgstr "サポートされていないGiraffeの設定"
+
+#: selfdrive/controls/lib/events.py:263
+msgid "Visit comma.ai/tg"
+msgstr "comma.ai/tg を参照"
+
+#: selfdrive/controls/lib/events.py:270
+msgid "White Panda Is No Longer Supported"
+msgstr "ホワイトパンダはサポート終了しました"
+
+#: selfdrive/controls/lib/events.py:271
+msgid "Upgrade to comma two or black panda"
+msgstr "コンマ2やブラックパンダにアップグレード"
+
+#: selfdrive/controls/lib/events.py:274
+msgid "White panda is no longer supported"
+msgstr "ホワイトパンダはサポート終了しました"
+
+#: selfdrive/controls/lib/events.py:279
+msgid "Stock LKAS is turned on"
+msgstr "純正LKASがオン"
+
+#: selfdrive/controls/lib/events.py:280
+msgid "Turn off stock LKAS to engage"
+msgstr "純正LKASをオフにしてエンゲージ"
+
+#: selfdrive/controls/lib/events.py:288
+msgid "Community Feature Detected"
+msgstr "コミュニティ開発の機能を検出"
+
+#: selfdrive/controls/lib/events.py:289
+msgid "Enable Community Features in Developer Settings"
+msgstr "開発者設定でコミュニティ機能を有効にする"
+
+#: selfdrive/controls/lib/events.py:296
+msgid "Dashcam Mode"
+msgstr "ダッシュカムモード"
+
+#: selfdrive/controls/lib/events.py:297
+msgid "Car Unrecognized"
+msgstr "認識できない車"
+
+#: selfdrive/controls/lib/events.py:304 selfdrive/controls/lib/events.py:312
+#: selfdrive/controls/lib/events.py:320
+msgid "BRAKE!"
+msgstr "ブレーキ！"
+
+#: selfdrive/controls/lib/events.py:305
+msgid "Stock AEB: Risk of Collision"
+msgstr "衝突の危険"
+
+#: selfdrive/controls/lib/events.py:313
+msgid "Stock FCW: Risk of Collision"
+msgstr "衝突の危険"
+
+#: selfdrive/controls/lib/events.py:321
+msgid "Risk of Collision"
+msgstr "衝突の危険"
+
+#: selfdrive/controls/lib/events.py:329
+msgid "Lane Departure Detected"
+msgstr "車線逸脱を検知"
+
+#: selfdrive/controls/lib/events.py:338
+msgid "openpilot will not brake while gas pressed"
+msgstr "アクセル中、オープンパイロットはブレーキをかけません"
+
+#: selfdrive/controls/lib/events.py:346
+msgid "Vehicle Parameter Identification Failed"
+msgstr "車両パラメータの識別に失敗しました。"
+
+#: selfdrive/controls/lib/events.py:355 selfdrive/controls/lib/events.py:523
+#: selfdrive/controls/lib/events.py:526
+msgid "Steering Temporarily Unavailable"
+msgstr "ステアリングは一時的に利用不可"
+
+#: selfdrive/controls/lib/events.py:362
+msgid "KEEP EYES ON ROAD: Driver Distracted"
+msgstr "道路から目を離さないで:注意散漫です"
+
+#: selfdrive/controls/lib/events.py:370
+msgid "KEEP EYES ON ROAD"
+msgstr "道路から目を離さないで"
+
+#: selfdrive/controls/lib/events.py:371
+msgid "Driver Appears Distracted"
+msgstr "ドライバーは注意散漫に見えます"
+
+#: selfdrive/controls/lib/events.py:378 selfdrive/controls/lib/events.py:402
+msgid "DISENGAGE IMMEDIATELY"
+msgstr "すぐに解除してください"
+
+#: selfdrive/controls/lib/events.py:379
+msgid "Driver Was Distracted"
+msgstr "ドライバーは注意力散漫"
+
+#: selfdrive/controls/lib/events.py:386
+msgid "TOUCH STEERING WHEEL: No Face Detected"
+msgstr "ハンドルに触れて:顔が検出できない"
+
+#: selfdrive/controls/lib/events.py:394
+msgid "TOUCH STEERING WHEEL"
+msgstr "ハンドルに触れて"
+
+#: selfdrive/controls/lib/events.py:395
+msgid "Driver Is Unresponsive"
+msgstr "ドライバーが無反応"
+
+#: selfdrive/controls/lib/events.py:403
+msgid "Driver Was Unresponsive"
+msgstr "ドライバーが無反応でした"
+
+#: selfdrive/controls/lib/events.py:410
+msgid "CHECK DRIVER FACE VISIBILITY"
+msgstr "ドライバーの顔の視認性を確認"
+
+#: selfdrive/controls/lib/events.py:411
+msgid "Driver Monitor Model Output Uncertain"
+msgstr "ドライバー監視モデルが不完全"
+
+#: selfdrive/controls/lib/events.py:419
+msgid "Resume Driving Manually"
+msgstr "手動で運転を再開"
+
+#: selfdrive/controls/lib/events.py:426
+msgid "STOPPED"
+msgstr "停止"
+
+#: selfdrive/controls/lib/events.py:427
+msgid "Press Resume to Move"
+msgstr "Resumeを押して移動します。"
+
+#: selfdrive/controls/lib/events.py:438
+msgid "Steer Left to Start Lane Change"
+msgstr "左ハンドルで車線変更を開始"
+
+#: selfdrive/controls/lib/events.py:439 selfdrive/controls/lib/events.py:447
+#: selfdrive/controls/lib/events.py:455 selfdrive/controls/lib/events.py:463
+#: selfdrive/controls/lib/events.py:802 selfdrive/controls/lib/events.py:810
+msgid "Monitor Other Vehicles"
+msgstr "他の車両を監視"
+
+#: selfdrive/controls/lib/events.py:446
+msgid "Steer Right to Start Lane Change"
+msgstr "右ハンドルで車線変更を開始"
+
+#: selfdrive/controls/lib/events.py:454
+msgid "Car Detected in Blindspot"
+msgstr "ブラインドスポットで車両を発見"
+
+#: selfdrive/controls/lib/events.py:462
+msgid "Changing Lane"
+msgstr "レーンチェンジ中"
+
+#: selfdrive/controls/lib/events.py:471
+msgid "Turn Exceeds Steering Limit"
+msgstr "ステアリングリミットを超えています"
+
+#: selfdrive/controls/lib/events.py:496
+msgid "Brake Hold Active"
+msgstr "サイドブレーキが作動"
+
+#: selfdrive/controls/lib/events.py:501
+msgid "Park Brake Engaged"
+msgstr "サイドブレーキ作動中"
+
+#: selfdrive/controls/lib/events.py:506
+msgid "Pedal Pressed During Attempt"
+msgstr "ペダル/ブレーキを検出"
+
+#: selfdrive/controls/lib/events.py:517
+msgid "Enable Adaptive Cruise"
+msgstr "ACCを有効化"
+
+#: selfdrive/controls/lib/events.py:533
+msgid "Attempting Refocus: Camera Focus Invalid"
+msgstr "再フォーカス中です"
+
+#: selfdrive/controls/lib/events.py:539
+msgid "Out of Storage Space"
+msgstr "空き容量不足"
+
+#: selfdrive/controls/lib/events.py:544
+msgid "Speed Too Low"
+msgstr "速度が遅すぎます"
+
+#: selfdrive/controls/lib/events.py:549 selfdrive/controls/lib/events.py:553
+msgid "NEOS Update Required"
+msgstr "NEOSの更新が必要"
+
+#: selfdrive/controls/lib/events.py:550
+msgid "Please Wait for Update"
+msgstr "更新をお待ちください"
+
+#: selfdrive/controls/lib/events.py:558 selfdrive/controls/lib/events.py:562
+msgid "No Data from Device Sensors"
+msgstr "デバイスセンサからのデータがありません"
+
+#: selfdrive/controls/lib/events.py:559 selfdrive/controls/lib/events.py:572
+#: selfdrive/controls/lib/events.py:669
+msgid "Reboot your Device"
+msgstr "デバイスを再起動"
+
+#: selfdrive/controls/lib/events.py:571 selfdrive/controls/lib/events.py:575
+msgid "Speaker not found"
+msgstr "スピーカーが見つかりません"
+
+#: selfdrive/controls/lib/events.py:579
+msgid "Distraction Level Too High"
+msgstr "注意力散漫すぎます"
+
+#: selfdrive/controls/lib/events.py:583
+msgid "System Overheated"
+msgstr "オーバーヒート"
+
+#: selfdrive/controls/lib/events.py:584
+msgid "System overheated"
+msgstr "オーバーヒート"
+
+#: selfdrive/controls/lib/events.py:588 selfdrive/controls/lib/events.py:589
+msgid "Gear not D"
+msgstr "Dではない"
+
+#: selfdrive/controls/lib/events.py:594
+#, fuzzy
+msgid "Calibration Invalid"
+msgstr "キャリブレーション"
+
+#: selfdrive/controls/lib/events.py:595
+#, fuzzy
+msgid "Reposition Device and Recalibrate"
+msgstr "キャリブレーションが無効です。再実行してください。"
+
+#: selfdrive/controls/lib/events.py:598 selfdrive/controls/lib/events.py:599
+msgid "Calibration Invalid: Reposition Device & Recalibrate"
+msgstr "キャリブレーションが無効です。再実行してください。"
+
+#: selfdrive/controls/lib/events.py:603 selfdrive/controls/lib/events.py:605
+msgid "Calibration in Progress"
+msgstr "キャリブレーション"
+
+#: selfdrive/controls/lib/events.py:609
+msgid "Door Open"
+msgstr "ドアが開いています"
+
+#: selfdrive/controls/lib/events.py:610
+msgid "Door open"
+msgstr "ドアが開いています"
+
+#: selfdrive/controls/lib/events.py:614
+msgid "Seatbelt Unlatched"
+msgstr "シートベルト未着用"
+
+#: selfdrive/controls/lib/events.py:615
+msgid "Seatbelt unlatched"
+msgstr "シートベルト未着用"
+
+#: selfdrive/controls/lib/events.py:619 selfdrive/controls/lib/events.py:620
+msgid "ESP Off"
+msgstr "ESPオフ"
+
+#: selfdrive/controls/lib/events.py:624 selfdrive/controls/lib/events.py:625
+msgid "Low Battery"
+msgstr "低バッテリー"
+
+#: selfdrive/controls/lib/events.py:629 selfdrive/controls/lib/events.py:630
+msgid "Communication Issue between Processes"
+msgstr "プロセス間の通信の問題"
+
+#: selfdrive/controls/lib/events.py:635 selfdrive/controls/lib/events.py:636
+msgid "Radar Communication Issue"
+msgstr "レーダー通信問題"
+
+#: selfdrive/controls/lib/events.py:641 selfdrive/controls/lib/events.py:642
+#: selfdrive/controls/lib/events.py:646 selfdrive/controls/lib/events.py:647
+msgid "Radar Error: Restart the Car"
+msgstr "レーダーエラー:車を再起動"
+
+#: selfdrive/controls/lib/events.py:651 selfdrive/controls/lib/events.py:652
+msgid "Driving model lagging"
+msgstr "制御モデルに遅延がある"
+
+#: selfdrive/controls/lib/events.py:656 selfdrive/controls/lib/events.py:657
+msgid "Vision Model Output Uncertain"
+msgstr "映像が不明瞭です"
+
+#: selfdrive/controls/lib/events.py:661 selfdrive/controls/lib/events.py:662
+msgid "Device Fell Off Mount"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:666 selfdrive/controls/lib/events.py:672
+msgid "Low Memory: Reboot Your Device"
+msgstr "ローメモリ:デバイスを再起動"
+
+#: selfdrive/controls/lib/events.py:668
+msgid "RAM Critically Low"
+msgstr "RAMが致命的に低い"
+
+#: selfdrive/controls/lib/events.py:677 selfdrive/controls/lib/events.py:678
+msgid "Controls Failed"
+msgstr "制御失敗"
+
+#: selfdrive/controls/lib/events.py:682
+msgid "Controls Mismatch"
+msgstr "制御不一致"
+
+#: selfdrive/controls/lib/events.py:686 selfdrive/controls/lib/events.py:688
+#: selfdrive/controls/lib/events.py:692
+msgid "CAN Error: Check Connections"
+msgstr "CANエラー:接続を確認"
+
+#: selfdrive/controls/lib/events.py:696 selfdrive/controls/lib/events.py:702
+msgid "LKAS Fault: Restart the Car"
+msgstr "LKASの故障:車を再起動"
+
+#: selfdrive/controls/lib/events.py:698
+msgid "LKAS Fault: Restart the car to engage"
+msgstr "LKASの故障:車を再起動後発進"
+
+#: selfdrive/controls/lib/events.py:706 selfdrive/controls/lib/events.py:712
+#: selfdrive/controls/lib/events.py:795
+msgid "Cruise Fault: Restart the Car"
+msgstr "クルーズ失敗:車を再起動"
+
+#: selfdrive/controls/lib/events.py:708 selfdrive/controls/lib/events.py:791
+msgid "Cruise Fault: Restart the car to engage"
+msgstr "クルーズ失敗:車を再起動後発進"
+
+#: selfdrive/controls/lib/events.py:716
+msgid "Gas Fault: Restart the Car"
+msgstr "アクセル故障:車を再起動"
+
+#: selfdrive/controls/lib/events.py:717
+msgid "Gas Error: Restart the Car"
+msgstr "アクセルエラー:車を再起動"
+
+#: selfdrive/controls/lib/events.py:722
+#, fuzzy
+msgid ""
+"Reverse\n"
+"Gear"
+msgstr "Rに切り替え"
+
+#: selfdrive/controls/lib/events.py:726
+msgid "Reverse Gear"
+msgstr "Rに切り替え"
+
+#: selfdrive/controls/lib/events.py:731
+msgid "Cruise Is Off"
+msgstr "クルーズコントロールオフ"
+
+#: selfdrive/controls/lib/events.py:735 selfdrive/controls/lib/events.py:736
+msgid "Planner Solution Error"
+msgstr "Planner Solution エラー"
+
+#: selfdrive/controls/lib/events.py:740 selfdrive/controls/lib/events.py:742
+#: selfdrive/controls/lib/events.py:746
+msgid "Harness Malfunction"
+msgstr "ハーネスが故障"
+
+#: selfdrive/controls/lib/events.py:743
+msgid "Please Check Hardware"
+msgstr "ハードウェアを確認して"
+
+#: selfdrive/controls/lib/events.py:751 selfdrive/controls/lib/events.py:760
+msgid "openpilot Canceled"
+msgstr "オープンパイロットはキャンセルされました"
+
+#: selfdrive/controls/lib/events.py:752
+msgid "No close lead car"
+msgstr "リードカー不在"
+
+#: selfdrive/controls/lib/events.py:755
+msgid "No Close Lead Car"
+msgstr "リードカー不在"
+
+#: selfdrive/controls/lib/events.py:761
+msgid "Speed too low"
+msgstr "速度が遅すぎる"
+
+#: selfdrive/controls/lib/events.py:768 selfdrive/controls/lib/events.py:773
+msgid "Speed Too High"
+msgstr "速度が速すぎる"
+
+#: selfdrive/controls/lib/events.py:769
+msgid "Slow down to resume operation"
+msgstr "速度を下げてオープンパイロットを再開"
+
+#: selfdrive/controls/lib/events.py:774
+msgid "Slow down to engage"
+msgstr "速度を落として発進"
+
+#: selfdrive/controls/lib/events.py:781
+msgid "Please connect to Internet"
+msgstr "インターネット接続を確認"
+
+#: selfdrive/controls/lib/events.py:782
+msgid "An Update Check Is Required to Engage"
+msgstr "発進するには更新が必要です"
+
+#: selfdrive/controls/lib/events.py:785
+msgid "Please Connect to Internet"
+msgstr "インターネット接続を確認"
+
+#: selfdrive/controls/lib/events.py:801
+msgid "Left ALC will start in 3s"
+msgstr "左車線に移動します"
+
+#: selfdrive/controls/lib/events.py:809
+msgid "Right ALC will start in 3s"
+msgstr "右車線に移動します"
+
+#: selfdrive/controls/lib/events.py:817
+msgid "STEERING REQUIRED: Lane Keeping OFF"
+msgstr "操作が必要:レーンキープオフ"
+
+#: selfdrive/controls/lib/events.py:825
+msgid "STEERING REQUIRED: Blinkers ON"
+msgstr "操作が必要:ウインカーオン"
+
+#: selfdrive/controls/lib/events.py:833 selfdrive/controls/lib/events.py:838
+msgid "Lead Car Is Moving"
+msgstr "リードカーが移動しました"
+
+#: selfdrive/controls/lib/events.py:847
+msgid "WARNING"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:848
+msgid "Grab wheel to start bypass"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:855
+msgid "BYPASSING"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:856
+msgid "HOLD WHEEL"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:863
+msgid "Bypassed!"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:864
+msgid "Release wheel when ready"
+msgstr ""
+
+#~ msgid "Drive Above"
+#~ msgstr "制限速度以上の運転をしてください"
--- a/selfdrive/assets/locales/ko-KR/LC_MESSAGES/events.mo
+++ b/selfdrive/assets/locales/ko-KR/LC_MESSAGES/events.mo
--- a/selfdrive/assets/locales/ko-KR/LC_MESSAGES/events.po
+++ b/selfdrive/assets/locales/ko-KR/LC_MESSAGES/events.po
@@ -0,0 +1,543 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-10-15 13:37+1000\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: ko-KR\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: selfdrive/controls/lib/events.py:153
+msgid "openpilot Unavailable"
+msgstr "오픈파일럿 사용불가"
+
+#: selfdrive/controls/lib/events.py:160 selfdrive/controls/lib/events.py:167
+msgid "TAKE CONTROL IMMEDIATELY"
+msgstr "핸들을 잡아주세요"
+
+#: selfdrive/controls/lib/events.py:187 selfdrive/controls/lib/events.py:328
+#: selfdrive/controls/lib/events.py:354 selfdrive/controls/lib/events.py:418
+#: selfdrive/controls/lib/events.py:470 selfdrive/controls/lib/events.py:522
+#: selfdrive/controls/lib/events.py:532
+msgid "TAKE CONTROL"
+msgstr "핸들을 잡아주세요"
+
+#: selfdrive/controls/lib/events.py:188
+#, fuzzy, python-format
+msgid "Steer Unavailable Below %(speed)d %(unit)s"
+msgstr "%d %s 이하에서는 조향제어가 불가합니다"
+
+#: selfdrive/controls/lib/events.py:196
+#, fuzzy, python-format
+msgid "Calibration in Progress: %d%%"
+msgstr "캘리브레이션 진행중: %d%%"
+
+#: selfdrive/controls/lib/events.py:197
+#, fuzzy, python-format
+msgid "Drive Above %(speed)d %(unit)s"
+msgstr "%(speed)d %(unit)s 이상의 속도로 주행하세요"
+
+#: selfdrive/controls/lib/events.py:204
+msgid "Poor GPS reception"
+msgstr "GPS 신호 약함"
+
+#: selfdrive/controls/lib/events.py:205
+msgid "If sky is visible, contact support"
+msgstr "환경에 문제가 없을경우 서비스팀에 연락하세요"
+
+#: selfdrive/controls/lib/events.py:205
+msgid "Check GPS antenna placement"
+msgstr "GPS안테나 위치를 점검하세요"
+
+#: selfdrive/controls/lib/events.py:210
+msgid "Cruise Mode Disabled"
+msgstr "크루즈 모드 꺼짐"
+
+#: selfdrive/controls/lib/events.py:212
+msgid "Main Switch Off"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:222
+msgid "DEBUG ALERT"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:230
+msgid "Be ready to take over at any time"
+msgstr "오픈파일럿 사용준비가 되었습니다"
+
+#: selfdrive/controls/lib/events.py:231 selfdrive/controls/lib/events.py:239
+#: selfdrive/controls/lib/events.py:247 selfdrive/controls/lib/events.py:255
+msgid "Always keep hands on wheel and eyes on road"
+msgstr "안전운전을 위해 항상 핸들을 잡고 도로교통 상황을 주시하세요"
+
+#: selfdrive/controls/lib/events.py:238
+msgid "WARNING: This branch is not tested"
+msgstr "경고: 이 Branch는 테스트되지 않았습니다"
+
+#: selfdrive/controls/lib/events.py:246
+msgid "Dashcam mode"
+msgstr "대시캠 모드"
+
+#: selfdrive/controls/lib/events.py:254
+msgid "Dashcam mode for unsupported car"
+msgstr "안전운전을 위해 항상 핸들을 잡고 도로교통 상황을 주시하세요"
+
+#: selfdrive/controls/lib/events.py:262
+msgid "Unsupported Giraffe Configuration"
+msgstr "지원되지 않는 지라프 설정"
+
+#: selfdrive/controls/lib/events.py:263
+msgid "Visit comma.ai/tg"
+msgstr "comma.ai/tg 방문하세요"
+
+#: selfdrive/controls/lib/events.py:270
+msgid "White Panda Is No Longer Supported"
+msgstr "화이트판다는 더 이상 지원되지 않습니다"
+
+#: selfdrive/controls/lib/events.py:271
+msgid "Upgrade to comma two or black panda"
+msgstr "콤마2나 블랙판다로 업그레이드 하세요"
+
+#: selfdrive/controls/lib/events.py:274
+msgid "White panda is no longer supported"
+msgstr "화이트판다는 더 이상 지원되지 않습니다"
+
+#: selfdrive/controls/lib/events.py:279
+msgid "Stock LKAS is turned on"
+msgstr "차량의 LKAS 기능이 켜져 있습니다"
+
+#: selfdrive/controls/lib/events.py:280
+msgid "Turn off stock LKAS to engage"
+msgstr "오픈파일럿 사용을 위해 LKAS를 끄세요"
+
+#: selfdrive/controls/lib/events.py:288
+msgid "Community Feature Detected"
+msgstr "커뮤니티 기능 감지됨"
+
+#: selfdrive/controls/lib/events.py:289
+msgid "Enable Community Features in Developer Settings"
+msgstr "개발자 설정에서 커뮤니티 기능을 활성화하세요"
+
+#: selfdrive/controls/lib/events.py:296
+msgid "Dashcam Mode"
+msgstr "대시캠 모드"
+
+#: selfdrive/controls/lib/events.py:297
+msgid "Car Unrecognized"
+msgstr "미인식 차량"
+
+#: selfdrive/controls/lib/events.py:304 selfdrive/controls/lib/events.py:312
+#: selfdrive/controls/lib/events.py:320
+msgid "BRAKE!"
+msgstr "브레이크!"
+
+#: selfdrive/controls/lib/events.py:305
+msgid "Stock AEB: Risk of Collision"
+msgstr "순정 AEB: 충돌 위험"
+
+#: selfdrive/controls/lib/events.py:313
+msgid "Stock FCW: Risk of Collision"
+msgstr "순정 FCW: 충돌 위험"
+
+#: selfdrive/controls/lib/events.py:321
+msgid "Risk of Collision"
+msgstr "충돌 위험"
+
+#: selfdrive/controls/lib/events.py:329
+msgid "Lane Departure Detected"
+msgstr "차선이탈이 감지되었습니다"
+
+#: selfdrive/controls/lib/events.py:338
+msgid "openpilot will not brake while gas pressed"
+msgstr "가속중에는 오픈파일럿 브레이크 작동불가"
+
+#: selfdrive/controls/lib/events.py:346
+msgid "Vehicle Parameter Identification Failed"
+msgstr "차량 매개 변수 식별 실패"
+
+#: selfdrive/controls/lib/events.py:355 selfdrive/controls/lib/events.py:523
+#: selfdrive/controls/lib/events.py:526
+msgid "Steering Temporarily Unavailable"
+msgstr "조향제어가 일시적으로 비활성화 되었습니다"
+
+#: selfdrive/controls/lib/events.py:362
+msgid "KEEP EYES ON ROAD: Driver Distracted"
+msgstr "도로상황에 주의를 기울이세요"
+
+#: selfdrive/controls/lib/events.py:370
+msgid "KEEP EYES ON ROAD"
+msgstr "도로상황에 주의하세요"
+
+#: selfdrive/controls/lib/events.py:371
+msgid "Driver Appears Distracted"
+msgstr "전방주시 필요"
+
+#: selfdrive/controls/lib/events.py:378 selfdrive/controls/lib/events.py:402
+msgid "DISENGAGE IMMEDIATELY"
+msgstr "경고: 조향제어가 즉시 해제됩니다"
+
+#: selfdrive/controls/lib/events.py:379
+msgid "Driver Was Distracted"
+msgstr "운전자 전방주시 불안"
+
+#: selfdrive/controls/lib/events.py:386
+msgid "TOUCH STEERING WHEEL: No Face Detected"
+msgstr "핸들을 터치하세요: 모니터링 없음"
+
+#: selfdrive/controls/lib/events.py:394
+msgid "TOUCH STEERING WHEEL"
+msgstr "핸들을 터치하세요"
+
+#: selfdrive/controls/lib/events.py:395
+msgid "Driver Is Unresponsive"
+msgstr "운전자 모니터링 없음"
+
+#: selfdrive/controls/lib/events.py:403
+msgid "Driver Was Unresponsive"
+msgstr "운전자 모니터링 없음"
+
+#: selfdrive/controls/lib/events.py:410
+msgid "CHECK DRIVER FACE VISIBILITY"
+msgstr "운전자 얼굴 확인 중"
+
+#: selfdrive/controls/lib/events.py:411
+msgid "Driver Monitor Model Output Uncertain"
+msgstr "운전자 얼굴 인식이 어렵습니다"
+
+#: selfdrive/controls/lib/events.py:419
+msgid "Resume Driving Manually"
+msgstr "수동으로 재출발 하세요"
+
+#: selfdrive/controls/lib/events.py:426
+msgid "STOPPED"
+msgstr "잠시멈춤"
+
+#: selfdrive/controls/lib/events.py:427
+msgid "Press Resume to Move"
+msgstr "재출발을 위해 RES버튼을 누르세요"
+
+#: selfdrive/controls/lib/events.py:438
+msgid "Steer Left to Start Lane Change"
+msgstr "차선 변경을 위해 핸들을 좌측으로 살짝 돌리세요"
+
+#: selfdrive/controls/lib/events.py:439 selfdrive/controls/lib/events.py:447
+#: selfdrive/controls/lib/events.py:455 selfdrive/controls/lib/events.py:463
+#: selfdrive/controls/lib/events.py:802 selfdrive/controls/lib/events.py:810
+msgid "Monitor Other Vehicles"
+msgstr "다른 차량에 주의하세요"
+
+#: selfdrive/controls/lib/events.py:446
+msgid "Steer Right to Start Lane Change"
+msgstr "차선 변경을 위해 핸들을 우측으로 살짝 돌리세요"
+
+#: selfdrive/controls/lib/events.py:454
+msgid "Car Detected in Blindspot"
+msgstr "측면 차량 접근 중"
+
+#: selfdrive/controls/lib/events.py:462
+msgid "Changing Lane"
+msgstr "차선 변경 중"
+
+#: selfdrive/controls/lib/events.py:471
+msgid "Turn Exceeds Steering Limit"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:496
+msgid "Brake Hold Active"
+msgstr "브레이크 홀드 중"
+
+#: selfdrive/controls/lib/events.py:501
+msgid "Park Brake Engaged"
+msgstr "파킹브레이크 체결 됨"
+
+#: selfdrive/controls/lib/events.py:506
+msgid "Pedal Pressed During Attempt"
+msgstr "시작 중 페달 밟음"
+
+#: selfdrive/controls/lib/events.py:517
+msgid "Enable Adaptive Cruise"
+msgstr "어댑티브 크루즈를 활성화하세요"
+
+#: selfdrive/controls/lib/events.py:533
+msgid "Attempting Refocus: Camera Focus Invalid"
+msgstr "카메라 포커스 조정중: 카메라 포커스 부정확"
+
+#: selfdrive/controls/lib/events.py:539
+msgid "Out of Storage Space"
+msgstr "저장공간 부족"
+
+#: selfdrive/controls/lib/events.py:544
+msgid "Speed Too Low"
+msgstr "차량의 속도 낮음"
+
+#: selfdrive/controls/lib/events.py:549 selfdrive/controls/lib/events.py:553
+msgid "NEOS Update Required"
+msgstr "NEOS 업데이트 필요"
+
+#: selfdrive/controls/lib/events.py:550
+msgid "Please Wait for Update"
+msgstr "업데이트를 위해 기다리세요"
+
+#: selfdrive/controls/lib/events.py:558 selfdrive/controls/lib/events.py:562
+msgid "No Data from Device Sensors"
+msgstr "EON센서로부터 데이터를 받지 못했습니다"
+
+#: selfdrive/controls/lib/events.py:559 selfdrive/controls/lib/events.py:572
+#: selfdrive/controls/lib/events.py:669
+msgid "Reboot your Device"
+msgstr "장치를 재시작 하세요"
+
+#: selfdrive/controls/lib/events.py:571 selfdrive/controls/lib/events.py:575
+msgid "Speaker not found"
+msgstr "스피커를 찾을 수 없습니다"
+
+#: selfdrive/controls/lib/events.py:579
+msgid "Distraction Level Too High"
+msgstr "운전자 전방주시 매우 불안"
+
+#: selfdrive/controls/lib/events.py:583
+msgid "System Overheated"
+msgstr "시스템이 과열되었습니다"
+
+#: selfdrive/controls/lib/events.py:584
+msgid "System overheated"
+msgstr "시스템이 과열되었습니다"
+
+#: selfdrive/controls/lib/events.py:588 selfdrive/controls/lib/events.py:589
+msgid "Gear not D"
+msgstr "기어가 드라이브모드가 아닙니다"
+
+#: selfdrive/controls/lib/events.py:594
+#, fuzzy
+msgid "Calibration Invalid"
+msgstr "캘리브레이션 진행 중"
+
+#: selfdrive/controls/lib/events.py:595
+#, fuzzy
+msgid "Reposition Device and Recalibrate"
+msgstr "캘리브레이션 유효하지 않음: 장치 위치 조정 및 재 캘리브레이션"
+
+#: selfdrive/controls/lib/events.py:598 selfdrive/controls/lib/events.py:599
+msgid "Calibration Invalid: Reposition Device & Recalibrate"
+msgstr "캘리브레이션 유효하지 않음: 장치 위치 조정 및 재 캘리브레이션"
+
+#: selfdrive/controls/lib/events.py:603 selfdrive/controls/lib/events.py:605
+msgid "Calibration in Progress"
+msgstr "캘리브레이션 진행 중"
+
+#: selfdrive/controls/lib/events.py:609
+msgid "Door Open"
+msgstr "도어가 열려있습니다"
+
+#: selfdrive/controls/lib/events.py:610
+msgid "Door open"
+msgstr "도어가 열려있습니다"
+
+#: selfdrive/controls/lib/events.py:614
+msgid "Seatbelt Unlatched"
+msgstr "안전벨트를 체결하세요"
+
+#: selfdrive/controls/lib/events.py:615
+msgid "Seatbelt unlatched"
+msgstr "안전벨트를 체결하세요"
+
+#: selfdrive/controls/lib/events.py:619 selfdrive/controls/lib/events.py:620
+msgid "ESP Off"
+msgstr "ESP 꺼짐"
+
+#: selfdrive/controls/lib/events.py:624 selfdrive/controls/lib/events.py:625
+msgid "Low Battery"
+msgstr "배터리 부족"
+
+#: selfdrive/controls/lib/events.py:629 selfdrive/controls/lib/events.py:630
+msgid "Communication Issue between Processes"
+msgstr "프로세스 간 통신 오류가 있습니다"
+
+#: selfdrive/controls/lib/events.py:635 selfdrive/controls/lib/events.py:636
+msgid "Radar Communication Issue"
+msgstr "레이더 오류: 차량을 재시작하세요"
+
+#: selfdrive/controls/lib/events.py:641 selfdrive/controls/lib/events.py:642
+#: selfdrive/controls/lib/events.py:646 selfdrive/controls/lib/events.py:647
+msgid "Radar Error: Restart the Car"
+msgstr "레이더 오류: 차량을 재시작하세요"
+
+#: selfdrive/controls/lib/events.py:651 selfdrive/controls/lib/events.py:652
+msgid "Driving model lagging"
+msgstr "주행 모델 지연"
+
+#: selfdrive/controls/lib/events.py:656 selfdrive/controls/lib/events.py:657
+msgid "Vision Model Output Uncertain"
+msgstr "전방 영상 인식 불안"
+
+#: selfdrive/controls/lib/events.py:661 selfdrive/controls/lib/events.py:662
+msgid "Device Fell Off Mount"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:666 selfdrive/controls/lib/events.py:672
+msgid "Low Memory: Reboot Your Device"
+msgstr "메모리 부족: 장치를 재시작하세요"
+
+#: selfdrive/controls/lib/events.py:668
+msgid "RAM Critically Low"
+msgstr "메모리 부족 심각"
+
+#: selfdrive/controls/lib/events.py:677 selfdrive/controls/lib/events.py:678
+msgid "Controls Failed"
+msgstr "차량제어 불가"
+
+#: selfdrive/controls/lib/events.py:682
+msgid "Controls Mismatch"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:686 selfdrive/controls/lib/events.py:688
+#: selfdrive/controls/lib/events.py:692
+msgid "CAN Error: Check Connections"
+msgstr "CAN 오류: CAN 신호를 확인하세요"
+
+#: selfdrive/controls/lib/events.py:696 selfdrive/controls/lib/events.py:702
+msgid "LKAS Fault: Restart the Car"
+msgstr "LKAS 오류: 차량을 재시작하세요"
+
+#: selfdrive/controls/lib/events.py:698
+msgid "LKAS Fault: Restart the car to engage"
+msgstr "LKAS 오류: 시작을 위해 차량을 재시작하세요"
+
+#: selfdrive/controls/lib/events.py:706 selfdrive/controls/lib/events.py:712
+#: selfdrive/controls/lib/events.py:795
+msgid "Cruise Fault: Restart the Car"
+msgstr "크루즈 오류: 차량을 재시작하세요"
+
+#: selfdrive/controls/lib/events.py:708 selfdrive/controls/lib/events.py:791
+msgid "Cruise Fault: Restart the car to engage"
+msgstr "크루즈 오류: 시작을 위해 차량을 재시작하세요"
+
+#: selfdrive/controls/lib/events.py:716
+msgid "Gas Fault: Restart the Car"
+msgstr "가속페달 오류: 차량을 재시작하세요"
+
+#: selfdrive/controls/lib/events.py:717
+msgid "Gas Error: Restart the Car"
+msgstr "가속페달 오류: 차량을 재시작하세요"
+
+#: selfdrive/controls/lib/events.py:722
+#, fuzzy
+msgid ""
+"Reverse\n"
+"Gear"
+msgstr "후진 기어"
+
+#: selfdrive/controls/lib/events.py:726
+msgid "Reverse Gear"
+msgstr "후진 기어"
+
+#: selfdrive/controls/lib/events.py:731
+msgid "Cruise Is Off"
+msgstr "크루즈 꺼짐"
+
+#: selfdrive/controls/lib/events.py:735 selfdrive/controls/lib/events.py:736
+msgid "Planner Solution Error"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:740 selfdrive/controls/lib/events.py:742
+#: selfdrive/controls/lib/events.py:746
+msgid "Harness Malfunction"
+msgstr "하네스 오작동"
+
+#: selfdrive/controls/lib/events.py:743
+msgid "Please Check Hardware"
+msgstr "장치를 점검하세요"
+
+#: selfdrive/controls/lib/events.py:751 selfdrive/controls/lib/events.py:760
+msgid "openpilot Canceled"
+msgstr "오픈파일럿 시작불가"
+
+#: selfdrive/controls/lib/events.py:752
+msgid "No close lead car"
+msgstr "선행차량이 없습니다"
+
+#: selfdrive/controls/lib/events.py:755
+msgid "No Close Lead Car"
+msgstr "선행차량이 없습니다"
+
+#: selfdrive/controls/lib/events.py:761
+msgid "Speed too low"
+msgstr "선행차량이 없습니다"
+
+#: selfdrive/controls/lib/events.py:768 selfdrive/controls/lib/events.py:773
+msgid "Speed Too High"
+msgstr "속도가 너무 높습니다"
+
+#: selfdrive/controls/lib/events.py:769
+msgid "Slow down to resume operation"
+msgstr "재 작동을 위해 차량의 속도를 낮추세요"
+
+#: selfdrive/controls/lib/events.py:774
+msgid "Slow down to engage"
+msgstr "시작을 위해 차량의 속도를 낮추세요"
+
+#: selfdrive/controls/lib/events.py:781
+msgid "Please connect to Internet"
+msgstr "인터넷에 연결하세요"
+
+#: selfdrive/controls/lib/events.py:782
+msgid "An Update Check Is Required to Engage"
+msgstr "시작을 위해 업데이트를 확인해야 합니다"
+
+#: selfdrive/controls/lib/events.py:785
+msgid "Please Connect to Internet"
+msgstr "인터넷에 연결하세요"
+
+#: selfdrive/controls/lib/events.py:801
+msgid "Left ALC will start in 3s"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:809
+msgid "Right ALC will start in 3s"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:817
+msgid "STEERING REQUIRED: Lane Keeping OFF"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:825
+msgid "STEERING REQUIRED: Blinkers ON"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:833 selfdrive/controls/lib/events.py:838
+msgid "Lead Car Is Moving"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:847
+msgid "WARNING"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:848
+msgid "Grab wheel to start bypass"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:855
+msgid "BYPASSING"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:856
+msgid "HOLD WHEEL"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:863
+msgid "Bypassed!"
+msgstr ""
+
+#: selfdrive/controls/lib/events.py:864
+msgid "Release wheel when ready"
+msgstr ""
--- a/selfdrive/assets/locales/zh-CN/LC_MESSAGES/events.mo
+++ b/selfdrive/assets/locales/zh-CN/LC_MESSAGES/events.mo
--- a/selfdrive/assets/locales/zh-CN/LC_MESSAGES/events.po
+++ b/selfdrive/assets/locales/zh-CN/LC_MESSAGES/events.po
@@ -0,0 +1,542 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-10-15 13:37+1000\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: Rick Lan <ricklan@gmail.com>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: zh-CN\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: selfdrive/controls/lib/events.py:153
+msgid "openpilot Unavailable"
+msgstr "无法使用 openpilot"
+
+#: selfdrive/controls/lib/events.py:160 selfdrive/controls/lib/events.py:167
+msgid "TAKE CONTROL IMMEDIATELY"
+msgstr "即刻接管控制"
+
+#: selfdrive/controls/lib/events.py:187 selfdrive/controls/lib/events.py:328
+#: selfdrive/controls/lib/events.py:354 selfdrive/controls/lib/events.py:418
+#: selfdrive/controls/lib/events.py:470 selfdrive/controls/lib/events.py:522
+#: selfdrive/controls/lib/events.py:532
+msgid "TAKE CONTROL"
+msgstr "接管控制"
+
+#: selfdrive/controls/lib/events.py:188
+#, fuzzy, python-format
+msgid "Steer Unavailable Below %(speed)d %(unit)s"
+msgstr "横向控制暂时失效，车速低于 %d %s"
+
+#: selfdrive/controls/lib/events.py:196
+#, fuzzy, python-format
+msgid "Calibration in Progress: %d%%"
+msgstr "正在校准中：%d%%"
+
+#: selfdrive/controls/lib/events.py:197
+#, fuzzy, python-format
+msgid "Drive Above %(speed)d %(unit)s"
+msgstr "车速请高于 %(speed)d %(unit)s"
+
+#: selfdrive/controls/lib/events.py:204
+msgid "Poor GPS reception"
+msgstr "GPS 讯号不良"
+
+#: selfdrive/controls/lib/events.py:205
+msgid "If sky is visible, contact support"
+msgstr "如果您不在地下室/隧道，请联系客服"
+
+#: selfdrive/controls/lib/events.py:205
+msgid "Check GPS antenna placement"
+msgstr "请检查 GPS 天线位置"
+
+#: selfdrive/controls/lib/events.py:210
+msgid "Cruise Mode Disabled"
+msgstr "巡航模式关闭"
+
+#: selfdrive/controls/lib/events.py:212
+msgid "Main Switch Off"
+msgstr "主开关已关闭"
+
+#: selfdrive/controls/lib/events.py:222
+msgid "DEBUG ALERT"
+msgstr "除错用警示讯息"
+
+#: selfdrive/controls/lib/events.py:230
+msgid "Be ready to take over at any time"
+msgstr "请准备好随时接管"
+
+#: selfdrive/controls/lib/events.py:231 selfdrive/controls/lib/events.py:239
+#: selfdrive/controls/lib/events.py:247 selfdrive/controls/lib/events.py:255
+msgid "Always keep hands on wheel and eyes on road"
+msgstr "将手放在方向盘上并持续监视路况"
+
+#: selfdrive/controls/lib/events.py:238
+msgid "WARNING: This branch is not tested"
+msgstr "注意：这个分支未经过测试"
+
+#: selfdrive/controls/lib/events.py:246
+msgid "Dashcam mode"
+msgstr "行车记录模式"
+
+#: selfdrive/controls/lib/events.py:254
+msgid "Dashcam mode for unsupported car"
+msgstr "行车记录模式 (尚未支援车种)"
+
+#: selfdrive/controls/lib/events.py:262
+msgid "Unsupported Giraffe Configuration"
+msgstr "未支援的 Giraffe 设置"
+
+#: selfdrive/controls/lib/events.py:263
+msgid "Visit comma.ai/tg"
+msgstr "请查阅 comma.ai/tg"
+
+#: selfdrive/controls/lib/events.py:270
+msgid "White Panda Is No Longer Supported"
+msgstr "不再支持 White Panda"
+
+#: selfdrive/controls/lib/events.py:271
+msgid "Upgrade to comma two or black panda"
+msgstr "请升级至 comma two 或是使用 black panda"
+
+#: selfdrive/controls/lib/events.py:274
+msgid "White panda is no longer supported"
+msgstr "不再支持 White panda"
+
+#: selfdrive/controls/lib/events.py:279
+msgid "Stock LKAS is turned on"
+msgstr "原厂 LKAS 已开启"
+
+#: selfdrive/controls/lib/events.py:280
+msgid "Turn off stock LKAS to engage"
+msgstr "需关闭原厂 LKAS 才能启用"
+
+#: selfdrive/controls/lib/events.py:288
+msgid "Community Feature Detected"
+msgstr "检测到社群开发功能"
+
+#: selfdrive/controls/lib/events.py:289
+msgid "Enable Community Features in Developer Settings"
+msgstr "请至开发人员设定裡启用社群开发功能"
+
+#: selfdrive/controls/lib/events.py:296
+msgid "Dashcam Mode"
+msgstr "行车记录模式"
+
+#: selfdrive/controls/lib/events.py:297
+msgid "Car Unrecognized"
+msgstr "无法辨识车款"
+
+#: selfdrive/controls/lib/events.py:304 selfdrive/controls/lib/events.py:312
+#: selfdrive/controls/lib/events.py:320
+msgid "BRAKE!"
+msgstr "刹车！"
+
+#: selfdrive/controls/lib/events.py:305
+msgid "Stock AEB: Risk of Collision"
+msgstr "有碰撞的风险"
+
+#: selfdrive/controls/lib/events.py:313
+msgid "Stock FCW: Risk of Collision"
+msgstr "有碰撞的风险"
+
+#: selfdrive/controls/lib/events.py:321
+msgid "Risk of Collision"
+msgstr "有碰撞的风险"
+
+#: selfdrive/controls/lib/events.py:329
+msgid "Lane Departure Detected"
+msgstr "偏离车道"
+
+#: selfdrive/controls/lib/events.py:338
+msgid "openpilot will not brake while gas pressed"
+msgstr "在您踩着油门的时候 openpilot 将不会刹车"
+
+#: selfdrive/controls/lib/events.py:346
+msgid "Vehicle Parameter Identification Failed"
+msgstr "车子参数识别失败"
+
+#: selfdrive/controls/lib/events.py:355 selfdrive/controls/lib/events.py:523
+#: selfdrive/controls/lib/events.py:526
+msgid "Steering Temporarily Unavailable"
+msgstr "横向控制暂时失效"
+
+#: selfdrive/controls/lib/events.py:362
+msgid "KEEP EYES ON ROAD: Driver Distracted"
+msgstr "注意路况：驾驶分心"
+
+#: selfdrive/controls/lib/events.py:370
+msgid "KEEP EYES ON ROAD"
+msgstr "注意路况"
+
+#: selfdrive/controls/lib/events.py:371
+msgid "Driver Appears Distracted"
+msgstr "驾驶分心"
+
+#: selfdrive/controls/lib/events.py:378 selfdrive/controls/lib/events.py:402
+msgid "DISENGAGE IMMEDIATELY"
+msgstr "立即解除"
+
+#: selfdrive/controls/lib/events.py:379
+msgid "Driver Was Distracted"
+msgstr "驾驶分心"
+
+#: selfdrive/controls/lib/events.py:386
+msgid "TOUCH STEERING WHEEL: No Face Detected"
+msgstr "请触碰方向盘：未侦测到驾驶面容"
+
+#: selfdrive/controls/lib/events.py:394
+msgid "TOUCH STEERING WHEEL"
+msgstr "请触碰方向盘"
+
+#: selfdrive/controls/lib/events.py:395
+msgid "Driver Is Unresponsive"
+msgstr "驾驶没有反应"
+
+#: selfdrive/controls/lib/events.py:403
+msgid "Driver Was Unresponsive"
+msgstr "驾驶没有反应"
+
+#: selfdrive/controls/lib/events.py:410
+msgid "CHECK DRIVER FACE VISIBILITY"
+msgstr "请检查驾驶面部的可见度"
+
+#: selfdrive/controls/lib/events.py:411
+msgid "Driver Monitor Model Output Uncertain"
+msgstr "驾驶监控模型判断不明确"
+
+#: selfdrive/controls/lib/events.py:419
+msgid "Resume Driving Manually"
+msgstr "请自行恢復驾驶"
+
+#: selfdrive/controls/lib/events.py:426
+msgid "STOPPED"
+msgstr "已停止"
+
+#: selfdrive/controls/lib/events.py:427
+msgid "Press Resume to Move"
+msgstr "请按 RES 继续"
+
+#: selfdrive/controls/lib/events.py:438
+msgid "Steer Left to Start Lane Change"
+msgstr "请往左打方向盘切换至左车道"
+
+#: selfdrive/controls/lib/events.py:439 selfdrive/controls/lib/events.py:447
+#: selfdrive/controls/lib/events.py:455 selfdrive/controls/lib/events.py:463
+#: selfdrive/controls/lib/events.py:802 selfdrive/controls/lib/events.py:810
+msgid "Monitor Other Vehicles"
+msgstr "请注意其它车辆"
+
+#: selfdrive/controls/lib/events.py:446
+msgid "Steer Right to Start Lane Change"
+msgstr "请往右打方向盘切换至右车道"
+
+#: selfdrive/controls/lib/events.py:454
+msgid "Car Detected in Blindspot"
+msgstr "盲点侦测到车辆"
+
+#: selfdrive/controls/lib/events.py:462
+msgid "Changing Lane"
+msgstr "切换车道中"
+
+#: selfdrive/controls/lib/events.py:471
+msgid "Turn Exceeds Steering Limit"
+msgstr "弯道超过横向操控限制"
+
+#: selfdrive/controls/lib/events.py:496
+msgid "Brake Hold Active"
+msgstr "驻车煞车已启用"
+
+#: selfdrive/controls/lib/events.py:501
+msgid "Park Brake Engaged"
+msgstr "电子驻车已启动"
+
+#: selfdrive/controls/lib/events.py:506
+msgid "Pedal Pressed During Attempt"
+msgstr "启用时侦测到驾驶踩踏油门/刹车"
+
+#: selfdrive/controls/lib/events.py:517
+msgid "Enable Adaptive Cruise"
+msgstr "启用自适应巡航"
+
+#: selfdrive/controls/lib/events.py:533
+msgid "Attempting Refocus: Camera Focus Invalid"
+msgstr "尝试对焦：相机已失焦"
+
+#: selfdrive/controls/lib/events.py:539
+msgid "Out of Storage Space"
+msgstr "存储空间不足"
+
+#: selfdrive/controls/lib/events.py:544
+msgid "Speed Too Low"
+msgstr "车速过慢"
+
+#: selfdrive/controls/lib/events.py:549 selfdrive/controls/lib/events.py:553
+msgid "NEOS Update Required"
+msgstr "NEOS 需要更新"
+
+#: selfdrive/controls/lib/events.py:550
+msgid "Please Wait for Update"
+msgstr "更新中请稍候"
+
+#: selfdrive/controls/lib/events.py:558 selfdrive/controls/lib/events.py:562
+msgid "No Data from Device Sensors"
+msgstr "未收到装置传感器数据"
+
+#: selfdrive/controls/lib/events.py:559 selfdrive/controls/lib/events.py:572
+#: selfdrive/controls/lib/events.py:669
+msgid "Reboot your Device"
+msgstr "请重启装置"
+
+#: selfdrive/controls/lib/events.py:571 selfdrive/controls/lib/events.py:575
+msgid "Speaker not found"
+msgstr "找不到音效装置"
+
+#: selfdrive/controls/lib/events.py:579
+msgid "Distraction Level Too High"
+msgstr "驾驶分心太多次"
+
+#: selfdrive/controls/lib/events.py:583
+msgid "System Overheated"
+msgstr "系统过热"
+
+#: selfdrive/controls/lib/events.py:584
+msgid "System overheated"
+msgstr "系统过热"
+
+#: selfdrive/controls/lib/events.py:588 selfdrive/controls/lib/events.py:589
+msgid "Gear not D"
+msgstr "不在 D 档位"
+
+#: selfdrive/controls/lib/events.py:594
+#, fuzzy
+msgid "Calibration Invalid"
+msgstr "正在校准中"
+
+#: selfdrive/controls/lib/events.py:595
+#, fuzzy
+msgid "Reposition Device and Recalibrate"
+msgstr "校准无效：请将装置放于新的位置并重新校准"
+
+#: selfdrive/controls/lib/events.py:598 selfdrive/controls/lib/events.py:599
+msgid "Calibration Invalid: Reposition Device & Recalibrate"
+msgstr "校准无效：请将装置放于新的位置并重新校准"
+
+#: selfdrive/controls/lib/events.py:603 selfdrive/controls/lib/events.py:605
+msgid "Calibration in Progress"
+msgstr "正在校准中"
+
+#: selfdrive/controls/lib/events.py:609
+msgid "Door Open"
+msgstr "车门开启"
+
+#: selfdrive/controls/lib/events.py:610
+msgid "Door open"
+msgstr "车门未关"
+
+#: selfdrive/controls/lib/events.py:614
+msgid "Seatbelt Unlatched"
+msgstr "安全带未繫"
+
+#: selfdrive/controls/lib/events.py:615
+msgid "Seatbelt unlatched"
+msgstr "安全带未繫"
+
+#: selfdrive/controls/lib/events.py:619 selfdrive/controls/lib/events.py:620
+msgid "ESP Off"
+msgstr "ESP 关闭"
+
+#: selfdrive/controls/lib/events.py:624 selfdrive/controls/lib/events.py:625
+msgid "Low Battery"
+msgstr "电量过低"
+
+#: selfdrive/controls/lib/events.py:629 selfdrive/controls/lib/events.py:630
+msgid "Communication Issue between Processes"
+msgstr "行程间出现通讯问题"
+
+#: selfdrive/controls/lib/events.py:635 selfdrive/controls/lib/events.py:636
+msgid "Radar Communication Issue"
+msgstr "雷达通讯出现问题"
+
+#: selfdrive/controls/lib/events.py:641 selfdrive/controls/lib/events.py:642
+#: selfdrive/controls/lib/events.py:646 selfdrive/controls/lib/events.py:647
+msgid "Radar Error: Restart the Car"
+msgstr "雷达讯号错误：请重新发动车辆"
+
+#: selfdrive/controls/lib/events.py:651 selfdrive/controls/lib/events.py:652
+msgid "Driving model lagging"
+msgstr "操控模型有延迟"
+
+#: selfdrive/controls/lib/events.py:656 selfdrive/controls/lib/events.py:657
+msgid "Vision Model Output Uncertain"
+msgstr "视觉模型判断不明确"
+
+#: selfdrive/controls/lib/events.py:661 selfdrive/controls/lib/events.py:662
+msgid "Device Fell Off Mount"
+msgstr "装置掉落侦测"
+
+#: selfdrive/controls/lib/events.py:666 selfdrive/controls/lib/events.py:672
+msgid "Low Memory: Reboot Your Device"
+msgstr "记忆体不足：请重启您的装置"
+
+#: selfdrive/controls/lib/events.py:668
+msgid "RAM Critically Low"
+msgstr "记忆体严重不足"
+
+#: selfdrive/controls/lib/events.py:677 selfdrive/controls/lib/events.py:678
+msgid "Controls Failed"
+msgstr "控制发生错误"
+
+#: selfdrive/controls/lib/events.py:682
+msgid "Controls Mismatch"
+msgstr "控制不匹配"
+
+#: selfdrive/controls/lib/events.py:686 selfdrive/controls/lib/events.py:688
+#: selfdrive/controls/lib/events.py:692
+msgid "CAN Error: Check Connections"
+msgstr "CAN 讯号错误：请检查线路"
+
+#: selfdrive/controls/lib/events.py:696 selfdrive/controls/lib/events.py:702
+msgid "LKAS Fault: Restart the Car"
+msgstr "LKAS 错误：请重新发动车辆"
+
+#: selfdrive/controls/lib/events.py:698
+msgid "LKAS Fault: Restart the car to engage"
+msgstr "LKAS 错误：请重新发动车辆"
+
+#: selfdrive/controls/lib/events.py:706 selfdrive/controls/lib/events.py:712
+#: selfdrive/controls/lib/events.py:795
+msgid "Cruise Fault: Restart the Car"
+msgstr "巡航系统错误：请重新发动车辆"
+
+#: selfdrive/controls/lib/events.py:708 selfdrive/controls/lib/events.py:791
+msgid "Cruise Fault: Restart the car to engage"
+msgstr "巡航系统错误：请重新发动车辆"
+
+#: selfdrive/controls/lib/events.py:716
+msgid "Gas Fault: Restart the Car"
+msgstr "油门错误：请重新发动车辆"
+
+#: selfdrive/controls/lib/events.py:717
+msgid "Gas Error: Restart the Car"
+msgstr "油门错误：请重新发动车辆"
+
+#: selfdrive/controls/lib/events.py:722
+#, fuzzy
+msgid ""
+"Reverse\n"
+"Gear"
+msgstr "切换至倒车档"
+
+#: selfdrive/controls/lib/events.py:726
+msgid "Reverse Gear"
+msgstr "切换至倒车档"
+
+#: selfdrive/controls/lib/events.py:731
+msgid "Cruise Is Off"
+msgstr "巡航系统关闭"
+
+#: selfdrive/controls/lib/events.py:735 selfdrive/controls/lib/events.py:736
+msgid "Planner Solution Error"
+msgstr "Planner Solution 错误"
+
+#: selfdrive/controls/lib/events.py:740 selfdrive/controls/lib/events.py:742
+#: selfdrive/controls/lib/events.py:746
+msgid "Harness Malfunction"
+msgstr "Harness 故障"
+
+#: selfdrive/controls/lib/events.py:743
+msgid "Please Check Hardware"
+msgstr "请检查硬体"
+
+#: selfdrive/controls/lib/events.py:751 selfdrive/controls/lib/events.py:760
+msgid "openpilot Canceled"
+msgstr "openpilot 已取消"
+
+#: selfdrive/controls/lib/events.py:752
+msgid "No close lead car"
+msgstr "前方没有车辆"
+
+#: selfdrive/controls/lib/events.py:755
+msgid "No Close Lead Car"
+msgstr "前方没有车辆"
+
+#: selfdrive/controls/lib/events.py:761
+msgid "Speed too low"
+msgstr "车速过慢"
+
+#: selfdrive/controls/lib/events.py:768 selfdrive/controls/lib/events.py:773
+msgid "Speed Too High"
+msgstr "车速过快"
+
+#: selfdrive/controls/lib/events.py:769
+msgid "Slow down to resume operation"
+msgstr "请减速后再启用"
+
+#: selfdrive/controls/lib/events.py:774
+msgid "Slow down to engage"
+msgstr "请减速后再启用"
+
+#: selfdrive/controls/lib/events.py:781
+msgid "Please connect to Internet"
+msgstr "请连接网路"
+
+#: selfdrive/controls/lib/events.py:782
+msgid "An Update Check Is Required to Engage"
+msgstr "需检查更新后才能启用"
+
+#: selfdrive/controls/lib/events.py:785
+msgid "Please Connect to Internet"
+msgstr "请连接网路"
+
+#: selfdrive/controls/lib/events.py:801
+msgid "Left ALC will start in 3s"
+msgstr "准备自动切至左车道"
+
+#: selfdrive/controls/lib/events.py:809
+msgid "Right ALC will start in 3s"
+msgstr "准备自动切至右车道"
+
+#: selfdrive/controls/lib/events.py:817
+msgid "STEERING REQUIRED: Lane Keeping OFF"
+msgstr "请接管方向盘：车道维持关闭"
+
+#: selfdrive/controls/lib/events.py:825
+msgid "STEERING REQUIRED: Blinkers ON"
+msgstr "请接管方向盘：方向灯开启"
+
+#: selfdrive/controls/lib/events.py:833 selfdrive/controls/lib/events.py:838
+msgid "Lead Car Is Moving"
+msgstr "前方车辆车移动中"
+
+#: selfdrive/controls/lib/events.py:847
+msgid "WARNING"
+msgstr "警告"
+
+#: selfdrive/controls/lib/events.py:848
+msgid "Grab wheel to start bypass"
+msgstr "请握好方向盘以绕过时间限制"
+
+#: selfdrive/controls/lib/events.py:855
+msgid "BYPASSING"
+msgstr "绕过时间限制中"
+
+#: selfdrive/controls/lib/events.py:856
+msgid "HOLD WHEEL"
+msgstr "握好方向盘"
+
+#: selfdrive/controls/lib/events.py:863
+msgid "Bypassed!"
+msgstr "时间限制已绕过"
+
+#: selfdrive/controls/lib/events.py:864
+msgid "Release wheel when ready"
+msgstr "准备好后请松开放向盘"
--- a/selfdrive/assets/locales/zh-TW/LC_MESSAGES/events.mo
+++ b/selfdrive/assets/locales/zh-TW/LC_MESSAGES/events.mo
--- a/selfdrive/assets/locales/zh-TW/LC_MESSAGES/events.po
+++ b/selfdrive/assets/locales/zh-TW/LC_MESSAGES/events.po
@@ -0,0 +1,542 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-10-15 13:37+1000\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: Rick Lan <ricklan@gmail.com>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: zh-TW\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: selfdrive/controls/lib/events.py:153
+msgid "openpilot Unavailable"
+msgstr "無法使用 openpilot"
+
+#: selfdrive/controls/lib/events.py:160 selfdrive/controls/lib/events.py:167
+msgid "TAKE CONTROL IMMEDIATELY"
+msgstr "即刻接管控制"
+
+#: selfdrive/controls/lib/events.py:187 selfdrive/controls/lib/events.py:328
+#: selfdrive/controls/lib/events.py:354 selfdrive/controls/lib/events.py:418
+#: selfdrive/controls/lib/events.py:470 selfdrive/controls/lib/events.py:522
+#: selfdrive/controls/lib/events.py:532
+msgid "TAKE CONTROL"
+msgstr "接管控制"
+
+#: selfdrive/controls/lib/events.py:188
+#, fuzzy, python-format
+msgid "Steer Unavailable Below %(speed)d %(unit)s"
+msgstr "橫向控制暫時失效，車速低於 %d %s"
+
+#: selfdrive/controls/lib/events.py:196
+#, fuzzy, python-format
+msgid "Calibration in Progress: %d%%"
+msgstr "正在校準中：%d%%"
+
+#: selfdrive/controls/lib/events.py:197
+#, fuzzy, python-format
+msgid "Drive Above %(speed)d %(unit)s"
+msgstr "車速請高於 %(speed)d %(unit)s"
+
+#: selfdrive/controls/lib/events.py:204
+msgid "Poor GPS reception"
+msgstr "GPS 訊號不良"
+
+#: selfdrive/controls/lib/events.py:205
+msgid "If sky is visible, contact support"
+msgstr "如果您不在地下室/隧道，請聯系客服"
+
+#: selfdrive/controls/lib/events.py:205
+msgid "Check GPS antenna placement"
+msgstr "請檢查 GPS 天線位置"
+
+#: selfdrive/controls/lib/events.py:210
+msgid "Cruise Mode Disabled"
+msgstr "巡航模式關閉"
+
+#: selfdrive/controls/lib/events.py:212
+msgid "Main Switch Off"
+msgstr "主開關已關閉"
+
+#: selfdrive/controls/lib/events.py:222
+msgid "DEBUG ALERT"
+msgstr "除錯用警示訊息"
+
+#: selfdrive/controls/lib/events.py:230
+msgid "Be ready to take over at any time"
+msgstr "請準備好隨時接管"
+
+#: selfdrive/controls/lib/events.py:231 selfdrive/controls/lib/events.py:239
+#: selfdrive/controls/lib/events.py:247 selfdrive/controls/lib/events.py:255
+msgid "Always keep hands on wheel and eyes on road"
+msgstr "將手放在方向盤上並持續監視路況"
+
+#: selfdrive/controls/lib/events.py:238
+msgid "WARNING: This branch is not tested"
+msgstr "注意：這個分支未經過測試"
+
+#: selfdrive/controls/lib/events.py:246
+msgid "Dashcam mode"
+msgstr "行車記錄模式"
+
+#: selfdrive/controls/lib/events.py:254
+msgid "Dashcam mode for unsupported car"
+msgstr "行車記錄模式 (尚未支援車種)"
+
+#: selfdrive/controls/lib/events.py:262
+msgid "Unsupported Giraffe Configuration"
+msgstr "未支援的 Giraffe 設置"
+
+#: selfdrive/controls/lib/events.py:263
+msgid "Visit comma.ai/tg"
+msgstr "請查閱 comma.ai/tg"
+
+#: selfdrive/controls/lib/events.py:270
+msgid "White Panda Is No Longer Supported"
+msgstr "不再支援 White Panda"
+
+#: selfdrive/controls/lib/events.py:271
+msgid "Upgrade to comma two or black panda"
+msgstr "請升級至 comma two 或是使用 black panda"
+
+#: selfdrive/controls/lib/events.py:274
+msgid "White panda is no longer supported"
+msgstr "不再支援 White panda"
+
+#: selfdrive/controls/lib/events.py:279
+msgid "Stock LKAS is turned on"
+msgstr "原廠 LKAS 已開啟"
+
+#: selfdrive/controls/lib/events.py:280
+msgid "Turn off stock LKAS to engage"
+msgstr "需關閉原廠 LKAS 才能啟用"
+
+#: selfdrive/controls/lib/events.py:288
+msgid "Community Feature Detected"
+msgstr "檢測到社群開發功能"
+
+#: selfdrive/controls/lib/events.py:289
+msgid "Enable Community Features in Developer Settings"
+msgstr "請至開發人員設定裡啟用社群開發功能"
+
+#: selfdrive/controls/lib/events.py:296
+msgid "Dashcam Mode"
+msgstr "行車記錄模式"
+
+#: selfdrive/controls/lib/events.py:297
+msgid "Car Unrecognized"
+msgstr "無法辨識車款"
+
+#: selfdrive/controls/lib/events.py:304 selfdrive/controls/lib/events.py:312
+#: selfdrive/controls/lib/events.py:320
+msgid "BRAKE!"
+msgstr "剎車！"
+
+#: selfdrive/controls/lib/events.py:305
+msgid "Stock AEB: Risk of Collision"
+msgstr "有碰撞的風險"
+
+#: selfdrive/controls/lib/events.py:313
+msgid "Stock FCW: Risk of Collision"
+msgstr "有碰撞的風險"
+
+#: selfdrive/controls/lib/events.py:321
+msgid "Risk of Collision"
+msgstr "有碰撞的風險"
+
+#: selfdrive/controls/lib/events.py:329
+msgid "Lane Departure Detected"
+msgstr "偏離車道"
+
+#: selfdrive/controls/lib/events.py:338
+msgid "openpilot will not brake while gas pressed"
+msgstr "在您踩著油門的時候 openpilot 將不會剎車"
+
+#: selfdrive/controls/lib/events.py:346
+msgid "Vehicle Parameter Identification Failed"
+msgstr "車子參數識別失敗"
+
+#: selfdrive/controls/lib/events.py:355 selfdrive/controls/lib/events.py:523
+#: selfdrive/controls/lib/events.py:526
+msgid "Steering Temporarily Unavailable"
+msgstr "橫向控制暫時失效"
+
+#: selfdrive/controls/lib/events.py:362
+msgid "KEEP EYES ON ROAD: Driver Distracted"
+msgstr "注意路況：駕駛分心"
+
+#: selfdrive/controls/lib/events.py:370
+msgid "KEEP EYES ON ROAD"
+msgstr "注意路況"
+
+#: selfdrive/controls/lib/events.py:371
+msgid "Driver Appears Distracted"
+msgstr "駕駛分心"
+
+#: selfdrive/controls/lib/events.py:378 selfdrive/controls/lib/events.py:402
+msgid "DISENGAGE IMMEDIATELY"
+msgstr "立即解除"
+
+#: selfdrive/controls/lib/events.py:379
+msgid "Driver Was Distracted"
+msgstr "駕駛分心"
+
+#: selfdrive/controls/lib/events.py:386
+msgid "TOUCH STEERING WHEEL: No Face Detected"
+msgstr "請觸碰方向盤：未偵測到駕駛面容"
+
+#: selfdrive/controls/lib/events.py:394
+msgid "TOUCH STEERING WHEEL"
+msgstr "請觸碰方向盤"
+
+#: selfdrive/controls/lib/events.py:395
+msgid "Driver Is Unresponsive"
+msgstr "駕駛沒有反應"
+
+#: selfdrive/controls/lib/events.py:403
+msgid "Driver Was Unresponsive"
+msgstr "駕駛沒有反應"
+
+#: selfdrive/controls/lib/events.py:410
+msgid "CHECK DRIVER FACE VISIBILITY"
+msgstr "請檢查駕駛面部的可見度"
+
+#: selfdrive/controls/lib/events.py:411
+msgid "Driver Monitor Model Output Uncertain"
+msgstr "駕駛監控模型判斷不明確"
+
+#: selfdrive/controls/lib/events.py:419
+msgid "Resume Driving Manually"
+msgstr "請自行恢復駕駛"
+
+#: selfdrive/controls/lib/events.py:426
+msgid "STOPPED"
+msgstr "已停止"
+
+#: selfdrive/controls/lib/events.py:427
+msgid "Press Resume to Move"
+msgstr "請按 RES 繼續"
+
+#: selfdrive/controls/lib/events.py:438
+msgid "Steer Left to Start Lane Change"
+msgstr "請往左打方向盤切換至左車道"
+
+#: selfdrive/controls/lib/events.py:439 selfdrive/controls/lib/events.py:447
+#: selfdrive/controls/lib/events.py:455 selfdrive/controls/lib/events.py:463
+#: selfdrive/controls/lib/events.py:802 selfdrive/controls/lib/events.py:810
+msgid "Monitor Other Vehicles"
+msgstr "請注意其它車輛"
+
+#: selfdrive/controls/lib/events.py:446
+msgid "Steer Right to Start Lane Change"
+msgstr "請往右打方向盤切換至右車道"
+
+#: selfdrive/controls/lib/events.py:454
+msgid "Car Detected in Blindspot"
+msgstr "盲點偵測到車輛"
+
+#: selfdrive/controls/lib/events.py:462
+msgid "Changing Lane"
+msgstr "切換車道中"
+
+#: selfdrive/controls/lib/events.py:471
+msgid "Turn Exceeds Steering Limit"
+msgstr "彎道超過橫向操控限制"
+
+#: selfdrive/controls/lib/events.py:496
+msgid "Brake Hold Active"
+msgstr "駐車煞車已啟用"
+
+#: selfdrive/controls/lib/events.py:501
+msgid "Park Brake Engaged"
+msgstr "電子駐車已啟動"
+
+#: selfdrive/controls/lib/events.py:506
+msgid "Pedal Pressed During Attempt"
+msgstr "啟用時偵測到駕駛踩踏油門/剎車"
+
+#: selfdrive/controls/lib/events.py:517
+msgid "Enable Adaptive Cruise"
+msgstr "啟用主動定速巡航"
+
+#: selfdrive/controls/lib/events.py:533
+msgid "Attempting Refocus: Camera Focus Invalid"
+msgstr "嘗試對焦：相機已失焦"
+
+#: selfdrive/controls/lib/events.py:539
+msgid "Out of Storage Space"
+msgstr "儲存空間不足"
+
+#: selfdrive/controls/lib/events.py:544
+msgid "Speed Too Low"
+msgstr "車速過慢"
+
+#: selfdrive/controls/lib/events.py:549 selfdrive/controls/lib/events.py:553
+msgid "NEOS Update Required"
+msgstr "NEOS 需要更新"
+
+#: selfdrive/controls/lib/events.py:550
+msgid "Please Wait for Update"
+msgstr "更新中請稍候"
+
+#: selfdrive/controls/lib/events.py:558 selfdrive/controls/lib/events.py:562
+msgid "No Data from Device Sensors"
+msgstr "未收到裝置傳感器數據"
+
+#: selfdrive/controls/lib/events.py:559 selfdrive/controls/lib/events.py:572
+#: selfdrive/controls/lib/events.py:669
+msgid "Reboot your Device"
+msgstr "請重啟裝置"
+
+#: selfdrive/controls/lib/events.py:571 selfdrive/controls/lib/events.py:575
+msgid "Speaker not found"
+msgstr "找不到音效裝置"
+
+#: selfdrive/controls/lib/events.py:579
+msgid "Distraction Level Too High"
+msgstr "駕駛分心太多次"
+
+#: selfdrive/controls/lib/events.py:583
+msgid "System Overheated"
+msgstr "系統過熱"
+
+#: selfdrive/controls/lib/events.py:584
+msgid "System overheated"
+msgstr "系統過熱"
+
+#: selfdrive/controls/lib/events.py:588 selfdrive/controls/lib/events.py:589
+msgid "Gear not D"
+msgstr "不在 D 檔位"
+
+#: selfdrive/controls/lib/events.py:594
+#, fuzzy
+msgid "Calibration Invalid"
+msgstr "正在校準中"
+
+#: selfdrive/controls/lib/events.py:595
+#, fuzzy
+msgid "Reposition Device and Recalibrate"
+msgstr "校準無效：請將裝置放於新的位置並重新校準"
+
+#: selfdrive/controls/lib/events.py:598 selfdrive/controls/lib/events.py:599
+msgid "Calibration Invalid: Reposition Device & Recalibrate"
+msgstr "校準無效：請將裝置放於新的位置並重新校準"
+
+#: selfdrive/controls/lib/events.py:603 selfdrive/controls/lib/events.py:605
+msgid "Calibration in Progress"
+msgstr "正在校準中"
+
+#: selfdrive/controls/lib/events.py:609
+msgid "Door Open"
+msgstr "車門開啟"
+
+#: selfdrive/controls/lib/events.py:610
+msgid "Door open"
+msgstr "車門未關"
+
+#: selfdrive/controls/lib/events.py:614
+msgid "Seatbelt Unlatched"
+msgstr "安全帶未繫"
+
+#: selfdrive/controls/lib/events.py:615
+msgid "Seatbelt unlatched"
+msgstr "安全帶未繫"
+
+#: selfdrive/controls/lib/events.py:619 selfdrive/controls/lib/events.py:620
+msgid "ESP Off"
+msgstr "ESP 關閉"
+
+#: selfdrive/controls/lib/events.py:624 selfdrive/controls/lib/events.py:625
+msgid "Low Battery"
+msgstr "電量過低"
+
+#: selfdrive/controls/lib/events.py:629 selfdrive/controls/lib/events.py:630
+msgid "Communication Issue between Processes"
+msgstr "行程間出現通訊問題"
+
+#: selfdrive/controls/lib/events.py:635 selfdrive/controls/lib/events.py:636
+msgid "Radar Communication Issue"
+msgstr "雷達通訊出現問題"
+
+#: selfdrive/controls/lib/events.py:641 selfdrive/controls/lib/events.py:642
+#: selfdrive/controls/lib/events.py:646 selfdrive/controls/lib/events.py:647
+msgid "Radar Error: Restart the Car"
+msgstr "雷達訊號錯誤：請重新發動車輛"
+
+#: selfdrive/controls/lib/events.py:651 selfdrive/controls/lib/events.py:652
+msgid "Driving model lagging"
+msgstr "操控模型有延遲"
+
+#: selfdrive/controls/lib/events.py:656 selfdrive/controls/lib/events.py:657
+msgid "Vision Model Output Uncertain"
+msgstr "視覺模型判斷不明確"
+
+#: selfdrive/controls/lib/events.py:661 selfdrive/controls/lib/events.py:662
+msgid "Device Fell Off Mount"
+msgstr "裝置掉落偵測"
+
+#: selfdrive/controls/lib/events.py:666 selfdrive/controls/lib/events.py:672
+msgid "Low Memory: Reboot Your Device"
+msgstr "記憶體不足：請重啟您的裝置"
+
+#: selfdrive/controls/lib/events.py:668
+msgid "RAM Critically Low"
+msgstr "記憶體嚴重不足"
+
+#: selfdrive/controls/lib/events.py:677 selfdrive/controls/lib/events.py:678
+msgid "Controls Failed"
+msgstr "控制發生錯誤"
+
+#: selfdrive/controls/lib/events.py:682
+msgid "Controls Mismatch"
+msgstr "控制不匹配"
+
+#: selfdrive/controls/lib/events.py:686 selfdrive/controls/lib/events.py:688
+#: selfdrive/controls/lib/events.py:692
+msgid "CAN Error: Check Connections"
+msgstr "CAN 訊號錯誤：請檢查線路"
+
+#: selfdrive/controls/lib/events.py:696 selfdrive/controls/lib/events.py:702
+msgid "LKAS Fault: Restart the Car"
+msgstr "LKAS 錯誤：請重新發動車輛"
+
+#: selfdrive/controls/lib/events.py:698
+msgid "LKAS Fault: Restart the car to engage"
+msgstr "LKAS 錯誤：請重新發動車輛"
+
+#: selfdrive/controls/lib/events.py:706 selfdrive/controls/lib/events.py:712
+#: selfdrive/controls/lib/events.py:795
+msgid "Cruise Fault: Restart the Car"
+msgstr "巡航系統錯誤：請重新發動車輛"
+
+#: selfdrive/controls/lib/events.py:708 selfdrive/controls/lib/events.py:791
+msgid "Cruise Fault: Restart the car to engage"
+msgstr "巡航系統錯誤：請重新發動車輛"
+
+#: selfdrive/controls/lib/events.py:716
+msgid "Gas Fault: Restart the Car"
+msgstr "油門錯誤：請重新發動車輛"
+
+#: selfdrive/controls/lib/events.py:717
+msgid "Gas Error: Restart the Car"
+msgstr "油門錯誤：請重新發動車輛"
+
+#: selfdrive/controls/lib/events.py:722
+#, fuzzy
+msgid ""
+"Reverse\n"
+"Gear"
+msgstr "切換至倒車檔"
+
+#: selfdrive/controls/lib/events.py:726
+msgid "Reverse Gear"
+msgstr "切換至倒車檔"
+
+#: selfdrive/controls/lib/events.py:731
+msgid "Cruise Is Off"
+msgstr "巡航系統關閉"
+
+#: selfdrive/controls/lib/events.py:735 selfdrive/controls/lib/events.py:736
+msgid "Planner Solution Error"
+msgstr "Planner Solution 錯誤"
+
+#: selfdrive/controls/lib/events.py:740 selfdrive/controls/lib/events.py:742
+#: selfdrive/controls/lib/events.py:746
+msgid "Harness Malfunction"
+msgstr "Harness 故障"
+
+#: selfdrive/controls/lib/events.py:743
+msgid "Please Check Hardware"
+msgstr "請檢查硬體"
+
+#: selfdrive/controls/lib/events.py:751 selfdrive/controls/lib/events.py:760
+msgid "openpilot Canceled"
+msgstr "openpilot 已取消"
+
+#: selfdrive/controls/lib/events.py:752
+msgid "No close lead car"
+msgstr "前方沒有車輛"
+
+#: selfdrive/controls/lib/events.py:755
+msgid "No Close Lead Car"
+msgstr "前方沒有車輛"
+
+#: selfdrive/controls/lib/events.py:761
+msgid "Speed too low"
+msgstr "車速過慢"
+
+#: selfdrive/controls/lib/events.py:768 selfdrive/controls/lib/events.py:773
+msgid "Speed Too High"
+msgstr "車速過快"
+
+#: selfdrive/controls/lib/events.py:769
+msgid "Slow down to resume operation"
+msgstr "請減速後再啟用"
+
+#: selfdrive/controls/lib/events.py:774
+msgid "Slow down to engage"
+msgstr "請減速後再啟用"
+
+#: selfdrive/controls/lib/events.py:781
+msgid "Please connect to Internet"
+msgstr "請連接網路"
+
+#: selfdrive/controls/lib/events.py:782
+msgid "An Update Check Is Required to Engage"
+msgstr "需檢查更新後才能啟用"
+
+#: selfdrive/controls/lib/events.py:785
+msgid "Please Connect to Internet"
+msgstr "請連接網路"
+
+#: selfdrive/controls/lib/events.py:801
+msgid "Left ALC will start in 3s"
+msgstr "準備自動切至左車道"
+
+#: selfdrive/controls/lib/events.py:809
+msgid "Right ALC will start in 3s"
+msgstr "準備自動切至右車道"
+
+#: selfdrive/controls/lib/events.py:817
+msgid "STEERING REQUIRED: Lane Keeping OFF"
+msgstr "請接管方向盤：車道維持關閉"
+
+#: selfdrive/controls/lib/events.py:825
+msgid "STEERING REQUIRED: Blinkers ON"
+msgstr "請接管方向盤：方向燈開啟"
+
+#: selfdrive/controls/lib/events.py:833 selfdrive/controls/lib/events.py:838
+msgid "Lead Car Is Moving"
+msgstr "前方車輛車移動中"
+
+#: selfdrive/controls/lib/events.py:847
+msgid "WARNING"
+msgstr "警告"
+
+#: selfdrive/controls/lib/events.py:848
+msgid "Grab wheel to start bypass"
+msgstr "請握好方向盤以繞過時間限制"
+
+#: selfdrive/controls/lib/events.py:855
+msgid "BYPASSING"
+msgstr "繞過時間限制中"
+
+#: selfdrive/controls/lib/events.py:856
+msgid "HOLD WHEEL"
+msgstr "握好方向盤"
+
+#: selfdrive/controls/lib/events.py:863
+msgid "Bypassed!"
+msgstr "時間限制已繞過"
+
+#: selfdrive/controls/lib/events.py:864
+msgid "Release wheel when ready"
+msgstr "準備好後請鬆開放向盤"
--- a/selfdrive/assets/offroad/icon_empty.png
+++ b/selfdrive/assets/offroad/icon_empty.png
--- a/selfdrive/assets/sounds_dp/disengaged.wav
+++ b/selfdrive/assets/sounds_dp/disengaged.wav
--- a/selfdrive/assets/sounds_dp/engaged.wav
+++ b/selfdrive/assets/sounds_dp/engaged.wav
--- a/selfdrive/assets/sounds_dp/error.wav
+++ b/selfdrive/assets/sounds_dp/error.wav
--- a/selfdrive/assets/sounds_dp/warning_1.wav
+++ b/selfdrive/assets/sounds_dp/warning_1.wav
--- a/selfdrive/assets/sounds_dp/warning_2.wav
+++ b/selfdrive/assets/sounds_dp/warning_2.wav
--- a/selfdrive/assets/sounds_dp/warning_repeat.wav
+++ b/selfdrive/assets/sounds_dp/warning_repeat.wav
--- a/selfdrive/athena/athenad.py
+++ b/selfdrive/athena/athenad.py
@@ -18,6 +18,8 @@ from typing import Any
 import requests
 from jsonrpc import JSONRPCResponseManager, dispatcher
 from websocket import ABNF, WebSocketTimeoutException, WebSocketException, create_connection
+from common.params import Params
+API_HOST = os.getenv('API_HOST', 'https://api.commadotai.com') if not Params().get_bool("dp_api_custom") else Params().get("dp_api_custom_url", encoding='utf-8')

 import cereal.messaging as messaging
 from cereal.services import service_list
@@ -26,7 +28,7 @@ from common.file_helpers import CallbackReader
 from common.basedir import PERSIST
 from common.params import Params
 from common.realtime import sec_since_boot
-from selfdrive.hardware import HARDWARE, PC, TICI
+from selfdrive.hardware import HARDWARE, PC, TICI, JETSON
 from selfdrive.loggerd.config import ROOT
 from selfdrive.loggerd.xattr_cache import getxattr, setxattr
 from selfdrive.swaglog import cloudlog, SWAGLOG_DIR
@@ -60,14 +62,14 @@ def handle_long_poll(ws):
  end_event = threading.Event()

  threads = [
-    threading.Thread(target=ws_recv, args=(ws, end_event), name='ws_recv'),
-    threading.Thread(target=ws_send, args=(ws, end_event), name='ws_send'),
-    threading.Thread(target=upload_handler, args=(end_event,), name='upload_handler'),
-    threading.Thread(target=log_handler, args=(end_event,), name='log_handler'),
-  ] + [
-    threading.Thread(target=jsonrpc_handler, args=(end_event,), name=f'worker_{x}')
-    for x in range(HANDLER_THREADS)
-  ]
+              threading.Thread(target=ws_recv, args=(ws, end_event), name='ws_recv'),
+              threading.Thread(target=ws_send, args=(ws, end_event), name='ws_send'),
+              threading.Thread(target=upload_handler, args=(end_event,), name='upload_handler'),
+              threading.Thread(target=log_handler, args=(end_event,), name='log_handler'),
+            ] + [
+              threading.Thread(target=jsonrpc_handler, args=(end_event,), name=f'worker_{x}')
+              for x in range(HANDLER_THREADS)
+            ]

  for thread in threads:
    thread.start()
@@ -373,7 +375,7 @@ def get_logs_to_send_sorted():


 def log_handler(end_event):
-  if PC:
+  if PC or JETSON:
    return

  log_files = []
@@ -570,7 +572,7 @@ def main():
      params.delete("LastAthenaPingTime")
    except socket.timeout:
      try:
-        r = requests.get("http://api.commadotai.com/v1/me", allow_redirects=False,
+        r = requests.get(API_HOST + "/v1/me", allow_redirects=False,
                         headers={"User-Agent": f"openpilot-{version}"}, timeout=15.0)
        if r.status_code == 302 and r.headers['Location'].startswith("http://u.web2go.com"):
          params.put_bool("PrimeRedirected", True)
--- a/selfdrive/athena/registration.py
+++ b/selfdrive/athena/registration.py
@@ -11,7 +11,7 @@ from common.spinner import Spinner
 from common.file_helpers import mkdirs_exists_ok
 from common.basedir import PERSIST
 from selfdrive.controls.lib.alertmanager import set_offroad_alert
-from selfdrive.hardware import HARDWARE
+from selfdrive.hardware import HARDWARE, JETSON
 from selfdrive.swaglog import cloudlog


@@ -20,6 +20,10 @@ UNREGISTERED_DONGLE_ID = "UnregisteredDevice"

 def register(show_spinner=False) -> str:
  params = Params()
+  if not params.get_bool('dp_reg') or params.get_bool('dp_jetson'):
+    return UNREGISTERED_DONGLE_ID
+  if JETSON:
+    return UNREGISTERED_DONGLE_ID
  params.put("SubscriberInfo", HARDWARE.get_subscriber_info())

  IMEI = params.get("IMEI", encoding='utf8')
--- a/selfdrive/boardd/boardd.cc
+++ b/selfdrive/boardd/boardd.cc
@@ -45,10 +45,13 @@ ExitHandler do_exit;
 void safety_setter_thread() {
  LOGD("Starting safety setter thread");
  // diagnostic only is the default, needed for VIN query
+  if (!panda->disable_relay) {
  panda->set_safety_model(cereal::CarParams::SafetyModel::ELM327);
+  }

  Params p = Params();

+  if (!panda->disable_relay && !panda->is_old_panda) {
  // switch to SILENT when CarVin param is read
  while (true) {
    if (do_exit || !panda->connected) {
@@ -68,7 +71,7 @@ void safety_setter_thread() {

  // VIN query done, stop listening to OBDII
  panda->set_safety_model(cereal::CarParams::SafetyModel::ELM327, 1);
-
+  }
  std::string params;
  LOGW("waiting for params to set safety model");
  while (true) {
@@ -90,7 +93,7 @@ void safety_setter_thread() {
  cereal::CarParams::Reader car_params = cmsg.getRoot<cereal::CarParams>();
  cereal::CarParams::SafetyModel safety_model = car_params.getSafetyModel();

-  panda->set_unsafe_mode(0);  // see safety_declarations.h for allowed values
+  panda->set_unsafe_mode(9);  // see safety_declarations.h for allowed values

  auto safety_param = car_params.getSafetyParam();
  LOGW("setting safety model: %d with param %d", (int)safety_model, safety_param);
@@ -172,7 +175,16 @@ bool usb_connect() {
 // must be called before threads or with mutex
 static bool usb_retry_connect() {
  LOGW("attempting to connect");
+  #ifdef XNX
+  // for some reason we need to re-insert panda twice so the system will then detect panda
+  // we use a python script to simulate the re-insert
+  while (!do_exit && !usb_connect()) {
+    std::system("python /home/openpilot/openpilot/scripts/reset_usb.py");
+    util::sleep_for(500);
+  }
+  #else
  while (!do_exit && !usb_connect()) { util::sleep_for(100); }
+  #endif
  if (panda) {
    LOGW("connected to board");
  }
@@ -258,6 +270,7 @@ void panda_state_thread(bool spoofing_started) {
  uint32_t no_ignition_cnt = 0;
  bool ignition_last = false;
  Params params = Params();
+  if (params.getBool("dp_toyota_disable_relay")) panda->disable_relay = true;

  // Broadcast empty pandaState message when panda is not yet connected
  while (!do_exit && !panda) {
@@ -276,12 +289,12 @@ void panda_state_thread(bool spoofing_started) {
    if (spoofing_started) {
      pandaState.ignition_line = 1;
    }
-
+    if (!panda->disable_relay) {
    // Make sure CAN buses are live: safety_setter_thread does not work if Panda CAN are silent and there is only one other CAN node
    if (pandaState.safety_model == (uint8_t)(cereal::CarParams::SafetyModel::SILENT)) {
      panda->set_safety_model(cereal::CarParams::SafetyModel::NO_OUTPUT);
    }
-
+    }
    ignition = ((pandaState.ignition_line != 0) || (pandaState.ignition_can != 0));

    if (ignition) {
@@ -295,11 +308,12 @@ void panda_state_thread(bool spoofing_started) {
    if (pandaState.power_save_enabled != power_save_desired) {
      panda->set_power_saving(power_save_desired);
    }
-
+    if (!panda->disable_relay) {
    // set safety mode to NO_OUTPUT when car is off. ELM327 is an alternative if we want to leverage athenad/connect
    if (!ignition && (pandaState.safety_model != (uint8_t)(cereal::CarParams::SafetyModel::NO_OUTPUT))) {
      panda->set_safety_model(cereal::CarParams::SafetyModel::NO_OUTPUT);
    }
+    }
 #endif

    // clear VIN, CarParams, and set new safety on car start
@@ -402,7 +416,7 @@ void panda_state_thread(bool spoofing_started) {

 void hardware_control_thread() {
  LOGD("start hardware control thread");
-  SubMaster sm({"deviceState", "driverCameraState"});
+  SubMaster sm({"deviceState", "driverCameraState", "dragonConf"});

  uint64_t last_front_frame_t = 0;
  uint16_t prev_fan_speed = 999;
@@ -417,7 +431,7 @@ void hardware_control_thread() {
    cnt++;
    sm.update(1000); // TODO: what happens if EINTR is sent while in sm.update?

-    if (!Hardware::PC() && sm.updated("deviceState")) {
+    if (!Hardware::PC() && !Hardware::JETSON() && sm.updated("deviceState")) {
      // Charging mode
      bool charging_disabled = sm["deviceState"].getDeviceState().getChargingDisabled();
      if (charging_disabled != prev_charging_disabled) {
@@ -431,7 +445,6 @@ void hardware_control_thread() {
        prev_charging_disabled = charging_disabled;
      }
    }
-
    // Other pandas don't have fan/IR to control
    if (panda->hw_type != cereal::PandaState::PandaType::UNO && panda->hw_type != cereal::PandaState::PandaType::DOS) continue;
    if (sm.updated("deviceState")) {
@@ -442,7 +455,7 @@ void hardware_control_thread() {
        prev_fan_speed = fan_speed;
      }
    }
-    if (sm.updated("driverCameraState")) {
+    if (!panda->is_old_panda && sm.updated("driverCameraState")) {
      auto event = sm["driverCameraState"];
      int cur_integ_lines = event.getDriverCameraState().getIntegLines();
      float cur_gain = event.getDriverCameraState().getGain();
@@ -482,6 +495,13 @@ static void pigeon_publish_raw(PubMaster &pm, const std::string &dat) {
 }

 void pigeon_thread() {
+  // dp - use toyota directly
+  if (panda->disable_relay) {
+    panda->set_safety_model(cereal::CarParams::SafetyModel::TOYOTA);
+  }
+
+  if (!panda->has_gps) return;
+
  PubMaster pm({"ubloxRaw"});
  bool ignition_last = false;

@@ -563,7 +583,7 @@ int main() {
  err = set_realtime_priority(54);
  LOG("set priority returns %d", err);

-  err = set_core_affinity(Hardware::TICI() ? 4 : 3);
+  err = set_core_affinity(Hardware::TICI()? 4 : Hardware::JETSON()? 2 : 3);
  LOG("set affinity returns %d", err);

  while (!do_exit) {
--- a/selfdrive/boardd/panda.cc
+++ b/selfdrive/boardd/panda.cc
@@ -45,6 +45,7 @@ Panda::Panda(std::string serial) {
      dev_handle = NULL;
    }
  }
+  if (dev_handle == NULL) goto fail;
  libusb_free_device_list(dev_list, 1);

  if (libusb_kernel_driver_active(dev_handle, 0) == 1) {
@@ -59,8 +60,13 @@ Panda::Panda(std::string serial) {

  hw_type = get_hw_type();

-  assert((hw_type != cereal::PandaState::PandaType::WHITE_PANDA) &&
-         (hw_type != cereal::PandaState::PandaType::GREY_PANDA));
+  // dp - fake black panda
+
+  has_gps = hw_type != cereal::PandaState::PandaType::WHITE_PANDA;
+  LOGW("Panda.cc - has_gps: %s", has_gps? "True": "False");
+  is_old_panda = hw_type == cereal::PandaState::PandaType::WHITE_PANDA || hw_type == cereal::PandaState::PandaType::GREY_PANDA;
+  LOGW("Panda.cc - is_old_panda: %s", is_old_panda? "True": "False");
+  hw_type = is_old_panda? cereal::PandaState::PandaType::BLACK_PANDA : hw_type;

  has_rtc = (hw_type == cereal::PandaState::PandaType::UNO) ||
            (hw_type == cereal::PandaState::PandaType::DOS);
--- a/selfdrive/boardd/panda.h
+++ b/selfdrive/boardd/panda.h
@@ -81,4 +81,9 @@ class Panda {
  void send_heartbeat();
  void can_send(capnp::List<cereal::CanData>::Reader can_data_list);
  int can_receive(kj::Array<capnp::word>& out_buf);
+
+  // dp
+  bool has_gps = true;
+  bool is_old_panda = false;
+  bool disable_relay = false;
 };
--- a/selfdrive/camerad/SConscript
+++ b/selfdrive/camerad/SConscript
@@ -1,4 +1,4 @@
-Import('env', 'arch', 'cereal', 'messaging', 'common', 'gpucommon', 'visionipc', 'USE_WEBCAM')
+Import('env', 'arch', 'cereal', 'messaging', 'common', 'gpucommon', 'visionipc', 'USE_WEBCAM', 'USE_MIPI')

 libs = ['m', 'pthread', common, 'jpeg', 'OpenCL', cereal, messaging, 'zmq', 'capnp', 'kj', visionipc, gpucommon]

@@ -9,13 +9,15 @@ elif arch == "larch64":
  libs += ['atomic']
  cameras = ['cameras/camera_qcom2.cc']
 else:
-  if USE_WEBCAM:
+  if USE_MIPI or USE_WEBCAM:
+    flag = "MIPI" if USE_MIPI else "WEBCAM"
+
    libs += ['opencv_core', 'opencv_highgui', 'opencv_imgproc', 'opencv_videoio']
-    cameras = ['cameras/camera_webcam.cc']
+    cameras = ['cameras/camera_%s.cc' % flag.lower()]
    env = env.Clone()
-    env.Append(CXXFLAGS = '-DWEBCAM')
-    env.Append(CFLAGS = '-DWEBCAM')
-    env.Append(CPPPATH = '/usr/local/include/opencv4')
+    env.Append(CXXFLAGS = "-D%s" % flag)
+    env.Append(CFLAGS = "-D%s" % flag)
+    env.Append(CPPPATH = '/usr/include/opencv4')
  else:
    cameras = ['cameras/camera_frame_stream.cc']

--- a/selfdrive/camerad/cameras/camera_common.cc
+++ b/selfdrive/camerad/cameras/camera_common.cc
@@ -24,6 +24,8 @@
 #include "selfdrive/camerad/cameras/camera_qcom2.h"
 #elif WEBCAM
 #include "selfdrive/camerad/cameras/camera_webcam.h"
+#elif MIPI
+#include "selfdrive/camerad/cameras/camera_mipi.h"
 #else
 #include "selfdrive/camerad/cameras/camera_frame_stream.h"
 #endif
--- a/selfdrive/camerad/cameras/camera_common.h
+++ b/selfdrive/camerad/cameras/camera_common.h
@@ -24,7 +24,8 @@
 #define CAMERA_ID_LGC920 6
 #define CAMERA_ID_LGC615 7
 #define CAMERA_ID_AR0231 8
-#define CAMERA_ID_MAX 9
+#define CAMERA_ID_IMX219 9
+#define CAMERA_ID_MAX 10

 #define UI_BUF_COUNT 4

--- a/selfdrive/camerad/cameras/camera_mipi.cc
+++ b/selfdrive/camerad/cameras/camera_mipi.cc
@@ -0,0 +1,152 @@
+#include "selfdrive/camerad/cameras/camera_mipi.h"
+
+#include <assert.h>
+#include <string.h>
+#include <unistd.h>
+
+#pragma clang diagnostic push
+#pragma clang diagnostic ignored "-Wundefined-inline"
+#include <opencv2/core.hpp>
+#include <opencv2/highgui.hpp>
+#include <opencv2/opencv.hpp>
+#include <opencv2/videoio.hpp>
+#pragma clang diagnostic pop
+
+#include "selfdrive/common/clutil.h"
+#include "selfdrive/common/swaglog.h"
+#include "selfdrive/common/timing.h"
+#include "selfdrive/common/util.h"
+
+#define FRAME_WIDTH  1164
+#define FRAME_HEIGHT 874
+
+extern ExitHandler do_exit;
+
+namespace {
+
+CameraInfo cameras_supported[CAMERA_ID_MAX] = {
+  // road facing
+  [CAMERA_ID_IMX219] = {
+      .frame_width = FRAME_WIDTH,
+      .frame_height = FRAME_HEIGHT,
+      .frame_stride = FRAME_WIDTH*3,
+      .bayer = false,
+      .bayer_flip = false,
+  },
+};
+std::string gstreamer_pipeline(int sensor_mode, int sensor_id, int flip_method, int display_width, int display_height) {
+    // sensor mode 2 = 1920 x 1080
+    return "nvarguscamerasrc sensor_mode=" + std::to_string(sensor_mode) +
+           " sensor-id=" + std::to_string(sensor_id) +
+           " ! video/x-raw(memory:NVMM), format=(string)NV12" +
+           " ! nvvidconv flip-method=" + std::to_string(flip_method) +
+           " ! videoconvert ! video/x-raw, format=(string)BGR" +
+           ", width=(int)" + std::to_string(display_width) +
+           ", height=(int)" + std::to_string(display_height) +
+           " ! appsink";
+}
+void camera_open(CameraState *s, bool rear) {
+  // empty
+}
+
+void camera_close(CameraState *s) {
+  // empty
+}
+
+void camera_init(VisionIpcServer * v, CameraState *s, int camera_id, unsigned int fps, cl_device_id device_id, cl_context ctx, VisionStreamType rgb_type, VisionStreamType yuv_type) {
+  assert(camera_id < std::size(cameras_supported));
+  s->ci = cameras_supported[camera_id];
+  assert(s->ci.frame_width != 0);
+
+  s->camera_num = camera_id;
+  s->fps = fps;
+  s->buf.init(device_id, ctx, s, v, FRAME_BUF_COUNT, rgb_type, yuv_type);
+}
+
+void run_camera(CameraState *s, cv::VideoCapture &video_cap, float *ts) {
+  assert(video_cap.isOpened());
+
+  cv::Size size(s->ci.frame_width, s->ci.frame_height);
+  const cv::Mat transform = cv::Mat(3, 3, CV_32F, ts);
+  uint32_t frame_id = 0;
+  size_t buf_idx = 0;
+
+  while (!do_exit) {
+    cv::Mat frame_mat, transformed_mat;
+    video_cap >> frame_mat;
+    cv::warpPerspective(frame_mat, transformed_mat, transform, size, cv::INTER_LINEAR, cv::BORDER_CONSTANT, 0);
+
+    s->buf.camera_bufs_metadata[buf_idx] = {.frame_id = frame_id};
+
+    auto &buf = s->buf.camera_bufs[buf_idx];
+    int transformed_size = transformed_mat.total() * transformed_mat.elemSize();
+    CL_CHECK(clEnqueueWriteBuffer(buf.copy_q, buf.buf_cl, CL_TRUE, 0, transformed_size, transformed_mat.data, 0, NULL, NULL));
+
+    s->buf.queue(buf_idx);
+
+    ++frame_id;
+    buf_idx = (buf_idx + 1) % FRAME_BUF_COUNT;
+  }
+}
+
+static void road_camera_thread(CameraState *s) {
+  set_thread_name("mipi_road_camera_thread");
+
+  std::string pipeline = gstreamer_pipeline(
+    2, // sensor mode
+    0, // sensor id
+    2, // flip method
+    704, // width
+    396); // height
+
+  cv::VideoCapture cap_road(pipeline, cv::CAP_GSTREAMER); // road
+
+  // transforms calculation see tools/webcam/warp_vis.py
+  float ts[9] = {1.50330396, 0.0, -59.40969163,
+                  0.0, 1.50330396, 76.20704846,
+                  0.0, 0.0, 1.0};
+  run_camera(s, cap_road, ts);
+}
+
+}  // namespace
+
+void cameras_init(VisionIpcServer *v, MultiCameraState *s, cl_device_id device_id, cl_context ctx) {
+  camera_init(v, &s->road_cam, CAMERA_ID_IMX219, 20, device_id, ctx,
+              VISION_STREAM_RGB_BACK, VISION_STREAM_YUV_BACK);
+  s->pm = new PubMaster({"roadCameraState", "thumbnail"});
+}
+
+void camera_autoexposure(CameraState *s, float grey_frac) {}
+
+void cameras_open(MultiCameraState *s) {
+  camera_open(&s->road_cam, true);
+}
+
+void cameras_close(MultiCameraState *s) {
+  camera_close(&s->road_cam);
+  delete s->pm;
+}
+
+void process_road_camera(MultiCameraState *s, CameraState *c, int cnt) {
+  const CameraBuf *b = &c->buf;
+  MessageBuilder msg;
+  auto framed = msg.initEvent().initRoadCameraState();
+  fill_frame_data(framed, b->cur_frame_data);
+  framed.setImage(kj::arrayPtr((const uint8_t *)b->cur_yuv_buf->addr, b->cur_yuv_buf->len));
+  framed.setTransform(b->yuv_transform.v);
+  s->pm->send("roadCameraState", msg);
+}
+
+void cameras_run(MultiCameraState *s) {
+  std::vector<std::thread> threads;
+  threads.push_back(start_process_thread(s, &s->road_cam, process_road_camera));
+
+  std::thread t_rear = std::thread(road_camera_thread, &s->road_cam);
+  set_thread_name("mipi_thread");
+
+  t_rear.join();
+
+  for (auto &t : threads) t.join();
+
+  cameras_close(s);
+}
--- a/selfdrive/camerad/cameras/camera_mipi.h
+++ b/selfdrive/camerad/cameras/camera_mipi.h
@@ -0,0 +1,28 @@
+#pragma once
+
+#ifdef __APPLE__
+#include <OpenCL/cl.h>
+#else
+#include <CL/cl.h>
+#endif
+
+#include "selfdrive/camerad/cameras/camera_common.h"
+
+#define FRAME_BUF_COUNT 16
+
+typedef struct CameraState {
+  CameraInfo ci;
+  int camera_num;
+  int fps;
+  float digital_gain;
+  CameraBuf buf;
+} CameraState;
+
+
+typedef struct MultiCameraState {
+  CameraState road_cam;
+  CameraState driver_cam;
+
+  SubMaster *sm;
+  PubMaster *pm;
+} MultiCameraState;
--- a/selfdrive/camerad/cameras/camera_qcom.cc
+++ b/selfdrive/camerad/cameras/camera_qcom.cc
@@ -27,7 +27,7 @@

 // leeco actuator (DW9800W H-Bridge Driver IC)
 // from sniff
-const uint16_t INFINITY_DAC = 364;
+//const uint16_t INFINITY_DAC = 364;

 extern ExitHandler do_exit;

@@ -48,9 +48,25 @@ CameraInfo cameras_supported[CAMERA_ID_MAX] = {
    .frame_height = 1748,
    .frame_stride = 2912,
    .bayer = true,
-    .bayer_flip = 3,
+    .bayer_flip = 0,
    .hdr = true
  },
+  [CAMERA_ID_IMX179] = {
+    .frame_width = 3280,
+    .frame_height = 2464,
+    .frame_stride = 4104,
+    .bayer = true,
+    .bayer_flip = 0,
+    .hdr = false
+  },
+  [CAMERA_ID_S5K3P8SP] = {
+    .frame_width = 2304,
+    .frame_height = 1728,
+    .frame_stride = 2880,
+    .bayer = true,
+    .bayer_flip = 1,
+    .hdr = false
+  },
  [CAMERA_ID_OV8865] = {
    .frame_width = 1632,
    .frame_height = 1224,
@@ -162,6 +178,24 @@ static int ov8865_apply_exposure(CameraState *s, int gain, int integ_lines, uint
  return sensor_write_regs(s, reg_array, std::size(reg_array), MSM_CAMERA_I2C_BYTE_DATA);
 }

+static int imx179_s5k3p8sp_apply_exposure(CameraState *s, int gain, int integ_lines, uint32_t frame_length) {
+  //printf("driver camera: %d %d %d\n", gain, integ_lines, frame_length);
+  struct msm_camera_i2c_reg_array reg_array[] = {
+    {0x104,0x1,0},
+
+    // FRM_LENGTH
+    {0x340, (uint16_t)(frame_length >> 8), 0}, {0x341, (uint16_t)(frame_length & 0xff), 0},
+    // coarse_int_time
+    {0x202, (uint16_t)(integ_lines >> 8), 0}, {0x203, (uint16_t)(integ_lines & 0xff),0},
+    // global_gain
+    {0x204, (uint16_t)(gain >> 8), 0}, {0x205, (uint16_t)(gain & 0xff),0},
+
+    // REG_HOLD
+    {0x104,0x0,0},
+  };
+  return sensor_write_regs(s, reg_array, std::size(reg_array), MSM_CAMERA_I2C_BYTE_DATA);
+}
+
 static void camera_init(VisionIpcServer *v, CameraState *s, int camera_id, int camera_num,
                        uint32_t pixel_clock, uint32_t line_length_pclk,
                        uint32_t max_gain, uint32_t fps, cl_device_id device_id, cl_context ctx,
@@ -179,18 +213,41 @@ static void camera_init(VisionIpcServer *v, CameraState *s, int camera_id, int c
  s->frame_length = s->pixel_clock / line_length_pclk / s->fps;
  s->self_recover = 0;

-  s->apply_exposure = (camera_id == CAMERA_ID_IMX298) ? imx298_apply_exposure : ov8865_apply_exposure;
+  if (camera_id == CAMERA_ID_IMX298) {
+    s->apply_exposure = imx298_apply_exposure;
+  } else if (camera_id == CAMERA_ID_S5K3P8SP || camera_id == CAMERA_ID_IMX179) {
+    s->apply_exposure = imx179_s5k3p8sp_apply_exposure;
+  } else {
+    s->apply_exposure = ov8865_apply_exposure;
+  }
  s->buf.init(device_id, ctx, s, v, FRAME_BUF_COUNT, rgb_type, yuv_type, camera_release_buffer);
 }

 void cameras_init(VisionIpcServer *v, MultiCameraState *s, cl_device_id device_id, cl_context ctx) {
  char project_name[1024] = {0};
  property_get("ro.boot.project_name", project_name, "");
-  assert(strlen(project_name) == 0);

-  // sensor is flipped in LP3
-  // IMAGE_ORIENT = 3
-  init_array_imx298[0].reg_data = 3;
+  char product_name[1024] = {0};
+  property_get("ro.product.name", product_name, "");
+
+  if (strlen(project_name) == 0) {
+    LOGD("LePro 3 op system detected");
+    s->device = DEVICE_LP3;
+
+    // sensor is flipped in LP3
+    // IMAGE_ORIENT = 3
+    init_array_imx298[0].reg_data = 3;
+    cameras_supported[CAMERA_ID_IMX298].bayer_flip = 3;
+  } else if (strcmp(product_name, "OnePlus3") == 0 && strcmp(project_name, "15811") != 0) {
+    // no more OP3 support
+    s->device = DEVICE_OP3;
+    assert(false);
+  } else if (strcmp(product_name, "OnePlus3") == 0 && strcmp(project_name, "15811") == 0) {
+    // only OP3T support
+    s->device = DEVICE_OP3T;
+  } else {
+    assert(false);
+  }

  // 0   = ISO 100
  // 256 = ISO 200
@@ -212,11 +269,30 @@ void cameras_init(VisionIpcServer *v, MultiCameraState *s, cl_device_id device_i
 #endif
              device_id, ctx,
              VISION_STREAM_RGB_BACK, VISION_STREAM_YUV_BACK);
+  s->road_cam.apply_exposure = imx298_apply_exposure;

-  camera_init(v, &s->driver_cam, CAMERA_ID_OV8865, 1,
-              /*pixel_clock=*/72000000, /*line_length_pclk=*/1602,
-              /*max_gain=*/510, 10, device_id, ctx,
-              VISION_STREAM_RGB_FRONT, VISION_STREAM_YUV_FRONT);
+  if (s->device == DEVICE_OP3T) {
+    camera_init(v, &s->driver_cam, CAMERA_ID_S5K3P8SP, 1,
+                /*pixel_clock=*/560000000, /*line_length_pclk=*/5120,
+                /*max_gain=*/510, 10, device_id, ctx,
+                VISION_STREAM_RGB_FRONT, VISION_STREAM_YUV_FRONT);
+    s->driver_cam.apply_exposure = imx179_s5k3p8sp_apply_exposure;
+  } else if (s->device == DEVICE_LP3) {
+    camera_init(v, &s->driver_cam, CAMERA_ID_OV8865, 1,
+                /*pixel_clock=*/72000000, /*line_length_pclk=*/1602,
+                /*max_gain=*/510, 10, device_id, ctx,
+                VISION_STREAM_RGB_FRONT, VISION_STREAM_YUV_FRONT);
+    s->driver_cam.apply_exposure = ov8865_apply_exposure;
+  } else {
+    camera_init(v, &s->driver_cam, CAMERA_ID_IMX179, 1,
+                /*pixel_clock=*/251200000, /*line_length_pclk=*/3440,
+                /*max_gain=*/224, 20, device_id, ctx,
+                VISION_STREAM_RGB_FRONT, VISION_STREAM_YUV_FRONT);
+    s->driver_cam.apply_exposure = imx179_s5k3p8sp_apply_exposure;
+  }
+
+  s->road_cam.device = s->device;
+  s->driver_cam.device = s->device;

  s->sm = new SubMaster({"driverState"});
  s->pm = new PubMaster({"roadCameraState", "driverCameraState", "thumbnail"});
@@ -260,8 +336,10 @@ static void set_exposure(CameraState *s, float exposure_frac, float gain_frac) {
  if (gain != s->cur_gain || integ_lines != s->cur_integ_lines) {
    if (s->apply_exposure == ov8865_apply_exposure) {
      gain = 800 * gain_frac; // ISO
+      err = s->apply_exposure(s, gain, integ_lines, s->frame_length);
+    } else if (s->apply_exposure) {
+      err = s->apply_exposure(s, gain, integ_lines, s->frame_length);
    }
-    err = s->apply_exposure(s, gain, integ_lines, s->frame_length);
    if (err == 0) {
      std::lock_guard lk(s->frame_info_lock);
      s->cur_gain = gain;
@@ -326,95 +404,310 @@ static void do_autoexposure(CameraState *s, float grey_frac) {
  }
 }

-static void sensors_init(MultiCameraState *s) {
-  msm_camera_sensor_slave_info slave_infos[2] = {
-  (msm_camera_sensor_slave_info){ // road camera
-    .sensor_name = "imx298",
-    .eeprom_name = "sony_imx298",
-    .actuator_name = "dw9800w",
-    .ois_name = "",
-    .flash_name = "pmic",
-    .camera_id = CAMERA_0,
-    .slave_addr = 32,
-    .i2c_freq_mode = I2C_FAST_MODE,
-    .addr_type = MSM_CAMERA_I2C_WORD_ADDR,
-    .sensor_id_info = {.sensor_id_reg_addr = 22, .sensor_id = 664, .module_id = 9, .vcm_id = 6},
-    .power_setting_array = {
-      .power_setting_a = {
-        {.seq_type = SENSOR_GPIO, .delay = 1},
-        {.seq_type = SENSOR_VREG, .seq_val = 2},
-        {.seq_type = SENSOR_GPIO, .seq_val = 5, .config_val = 2},
-        {.seq_type = SENSOR_VREG, .seq_val = 1},
-        {.seq_type = SENSOR_VREG, .seq_val = 3, .delay = 1},
-        {.seq_type = SENSOR_CLK, .config_val = 24000000, .delay = 1},
-        {.seq_type = SENSOR_GPIO, .config_val = 2, .delay = 10},
-      },
-      .size = 7,
-      .power_down_setting_a = {
-        {.seq_type = SENSOR_CLK, .delay = 1},
-        {.seq_type = SENSOR_GPIO, .delay = 1},
-        {.seq_type = SENSOR_VREG, .seq_val = 1},
-        {.seq_type = SENSOR_GPIO, .seq_val = 5},
-        {.seq_type = SENSOR_VREG, .seq_val = 2},
-        {.seq_type = SENSOR_VREG, .seq_val = 3, .delay = 1},
-      },
-      .size_down = 6,
-    },
-    .is_init_params_valid = 0,
-    .sensor_init_params = {.modes_supported = 1, .position = BACK_CAMERA_B, .sensor_mount_angle = 90},
-    .output_format = MSM_SENSOR_BAYER,
-  },
-  (msm_camera_sensor_slave_info){ // driver camera
-    .sensor_name = "ov8865_sunny",
-    .eeprom_name = "ov8865_plus",
-    .actuator_name = "",
-    .ois_name = "",
-    .flash_name = "",
-    .camera_id = CAMERA_2,
-    .slave_addr = 108,
-    .i2c_freq_mode = I2C_FAST_MODE,
-    .addr_type = MSM_CAMERA_I2C_WORD_ADDR,
-    .sensor_id_info = {.sensor_id_reg_addr = 12299, .sensor_id = 34917, .module_id = 2},
-    .power_setting_array = {
-      .power_setting_a = {
-        {.seq_type = SENSOR_GPIO, .delay = 5},
-        {.seq_type = SENSOR_VREG, .seq_val = 1},
-        {.seq_type = SENSOR_VREG, .seq_val = 2},
-        {.seq_type = SENSOR_VREG},
-        {.seq_type = SENSOR_CLK, .config_val = 24000000, .delay = 1},
-        {.seq_type = SENSOR_GPIO, .config_val = 2, .delay = 1},
-      },
-      .size = 6,
-      .power_down_setting_a = {
-        {.seq_type = SENSOR_GPIO, .delay = 5},
-        {.seq_type = SENSOR_CLK, .delay = 1},
-        {.seq_type = SENSOR_VREG},
-        {.seq_type = SENSOR_VREG, .seq_val = 1},
-        {.seq_type = SENSOR_VREG, .seq_val = 2, .delay = 1},
-      },
-      .size_down = 5,
-    },
-    .is_init_params_valid = 0,
-    .sensor_init_params = {.modes_supported = 1, .position = FRONT_CAMERA_B, .sensor_mount_angle = 270},
-    .output_format = MSM_SENSOR_BAYER,
-  }};
+static uint8_t* get_eeprom(int eeprom_fd, size_t *out_len) {
+  msm_eeprom_cfg_data cfg = {.cfgtype = CFG_EEPROM_GET_CAL_DATA};
+  int err = cam_ioctl(eeprom_fd, VIDIOC_MSM_EEPROM_CFG, &cfg, "get_eeprom begin");
+  assert(err >= 0);

-  unique_fd sensorinit_fd = open("/dev/v4l-subdev11", O_RDWR | O_NONBLOCK);
-  assert(sensorinit_fd >= 0);
-  for (auto &info : slave_infos) {
-    info.power_setting_array.power_setting = &info.power_setting_array.power_setting_a[0];
-    info.power_setting_array.power_down_setting = &info.power_setting_array.power_down_setting_a[0];
-    sensor_init_cfg_data sensor_init_cfg = {.cfgtype = CFG_SINIT_PROBE, .cfg.setting = &info};
-    int err = cam_ioctl(sensorinit_fd, VIDIOC_MSM_SENSOR_INIT_CFG, &sensor_init_cfg, "sensor init cfg");
-    assert(err >= 0);
+  uint32_t num_bytes = cfg.cfg.get_data.num_bytes;
+  assert(num_bytes > 100);
+
+  uint8_t* buffer = (uint8_t*)malloc(num_bytes);
+  assert(buffer);
+  memset(buffer, 0, num_bytes);
+
+  cfg.cfgtype = CFG_EEPROM_READ_CAL_DATA;
+  cfg.cfg.read_data.num_bytes = num_bytes;
+  cfg.cfg.read_data.dbuffer = buffer;
+  err = cam_ioctl(eeprom_fd, VIDIOC_MSM_EEPROM_CFG, &cfg, "get_eeprom end");
+  assert(err >= 0);
+
+  *out_len = num_bytes;
+  return buffer;
+}
+
+static void imx298_ois_calibration(int ois_fd, uint8_t* eeprom) {
+  const int ois_registers[][2] = {
+    // == SET_FADJ_PARAM() == (factory adjustment)
+
+    // Set Hall Current DAC
+    {0x8230, *(uint16_t*)(eeprom+0x102)}, //_P_30_ADC_CH0 (CURDAT)
+
+    // Set Hall     PreAmp Offset
+    {0x8231, *(uint16_t*)(eeprom+0x104)}, //_P_31_ADC_CH1 (HALOFS_X)
+    {0x8232, *(uint16_t*)(eeprom+0x106)}, //_P_32_ADC_CH2 (HALOFS_Y)
+
+    // Set Hall-X/Y PostAmp Offset
+    {0x841e, *(uint16_t*)(eeprom+0x108)}, //_M_X_H_ofs
+    {0x849e, *(uint16_t*)(eeprom+0x10a)}, //_M_Y_H_ofs
+
+    // Set Residual Offset
+    {0x8239, *(uint16_t*)(eeprom+0x10c)}, //_P_39_Ch3_VAL_1 (PSTXOF)
+    {0x823b, *(uint16_t*)(eeprom+0x10e)}, //_P_3B_Ch3_VAL_3 (PSTYOF)
+
+    // DIGITAL GYRO OFFSET
+    {0x8406, *(uint16_t*)(eeprom+0x110)}, //_M_Kgx00
+    {0x8486, *(uint16_t*)(eeprom+0x112)}, //_M_Kgy00
+    {0x846a, *(uint16_t*)(eeprom+0x120)}, //_M_TMP_X_
+    {0x846b, *(uint16_t*)(eeprom+0x122)}, //_M_TMP_Y_
+
+    // HALLSENSE
+    // Set Hall Gain
+    {0x8446, *(uint16_t*)(eeprom+0x114)}, //_M_KgxHG
+    {0x84c6, *(uint16_t*)(eeprom+0x116)}, //_M_KgyHG
+    // Set Cross Talk Canceller
+    {0x8470, *(uint16_t*)(eeprom+0x124)}, //_M_KgxH0
+    {0x8472, *(uint16_t*)(eeprom+0x126)}, //_M_KgyH0
+
+    // LOOPGAIN
+    {0x840f, *(uint16_t*)(eeprom+0x118)}, //_M_KgxG
+    {0x848f, *(uint16_t*)(eeprom+0x11a)}, //_M_KgyG
+
+    // Position Servo ON ( OIS OFF )
+    {0x847f, 0x0c0c}, //_M_EQCTL
+  };
+
+  struct msm_camera_i2c_seq_reg_array ois_reg_settings[std::size(ois_registers)] = {{0}};
+  for (int i=0; i<std::size(ois_registers); i++) {
+    ois_reg_settings[i].reg_addr = ois_registers[i][0];
+    ois_reg_settings[i].reg_data[0] = ois_registers[i][1] & 0xff;
+    ois_reg_settings[i].reg_data[1] = (ois_registers[i][1] >> 8) & 0xff;
+    ois_reg_settings[i].reg_data_size = 2;
  }
+  struct msm_camera_i2c_seq_reg_setting ois_reg_setting = {
+    .reg_setting = &ois_reg_settings[0],
+    .size = std::size(ois_reg_settings),
+    .addr_type = MSM_CAMERA_I2C_WORD_ADDR,
+    .delay = 0,
+  };
+  msm_ois_cfg_data cfg = {.cfgtype = CFG_OIS_I2C_WRITE_SEQ_TABLE, .cfg.settings = &ois_reg_setting};
+  cam_ioctl(ois_fd, VIDIOC_MSM_OIS_CFG, &cfg, "ois reg calibration");
+}
+
+static void sensors_init(MultiCameraState *s) {
+  int err;
+
+  unique_fd sensorinit_fd;
+  if (s->device == DEVICE_LP3) {
+    sensorinit_fd = open("/dev/v4l-subdev11", O_RDWR | O_NONBLOCK);
+  } else {
+    sensorinit_fd = open("/dev/v4l-subdev12", O_RDWR | O_NONBLOCK);
+  }
+  assert(sensorinit_fd >= 0);
+
+  // init road camera sensor
+
+  struct msm_camera_sensor_slave_info slave_info = {0};
+  if (s->device == DEVICE_LP3) {
+    slave_info = (struct msm_camera_sensor_slave_info){
+      .sensor_name = "imx298",
+      .eeprom_name = "sony_imx298",
+      .actuator_name = "dw9800w",
+      .ois_name = "",
+      .flash_name = "pmic",
+      .camera_id = CAMERA_0,
+      .slave_addr = 32,
+      .i2c_freq_mode = I2C_FAST_MODE,
+      .addr_type = MSM_CAMERA_I2C_WORD_ADDR,
+      .sensor_id_info = {.sensor_id_reg_addr = 22, .sensor_id = 664, .module_id = 9, .vcm_id = 6},
+      .power_setting_array = {
+        .power_setting_a = {
+          {.seq_type = SENSOR_GPIO, .delay = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 2},
+          {.seq_type = SENSOR_GPIO, .seq_val = 5, .config_val = 2},
+          {.seq_type = SENSOR_VREG, .seq_val = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 3, .delay = 1},
+          {.seq_type = SENSOR_CLK, .config_val = 24000000, .delay = 1},
+          {.seq_type = SENSOR_GPIO, .config_val = 2, .delay = 10},
+        },
+        .size = 7,
+        .power_down_setting_a = {
+          {.seq_type = SENSOR_CLK, .delay = 1},
+          {.seq_type = SENSOR_GPIO, .delay = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 1},
+          {.seq_type = SENSOR_GPIO, .seq_val = 5},
+          {.seq_type = SENSOR_VREG, .seq_val = 2},
+          {.seq_type = SENSOR_VREG, .seq_val = 3, .delay = 1},
+        },
+        .size_down = 6,
+      },
+      .is_init_params_valid = 0,
+      .sensor_init_params = {.modes_supported = 1, .position = BACK_CAMERA_B, .sensor_mount_angle = 90},
+      .output_format = MSM_SENSOR_BAYER,
+    };
+  } else {
+    slave_info = (struct msm_camera_sensor_slave_info){
+      .sensor_name = "imx298",
+      .eeprom_name = "sony_imx298",
+      .actuator_name = "rohm_bu63165gwl",
+      .ois_name = "rohm_bu63165gwl",
+      .camera_id = CAMERA_0,
+      .slave_addr = 52,
+      .i2c_freq_mode = I2C_CUSTOM_MODE,
+      .addr_type = MSM_CAMERA_I2C_WORD_ADDR,
+      .sensor_id_info = {.sensor_id_reg_addr = 22, .sensor_id = 664},
+      .power_setting_array = {
+        .power_setting_a = {
+          {.seq_type = SENSOR_GPIO, .delay = 2},
+          {.seq_type = SENSOR_VREG, .seq_val = 2, .delay = 2},
+          {.seq_type = SENSOR_VREG, .delay = 2},
+          {.seq_type = SENSOR_VREG, .seq_val = 1, .delay = 2},
+          {.seq_type = SENSOR_GPIO, .seq_val = 6, .config_val = 2},
+          {.seq_type = SENSOR_VREG, .seq_val = 3, .delay = 5},
+          {.seq_type = SENSOR_VREG, .seq_val = 4, .delay = 5},
+          {.seq_type = SENSOR_CLK, .config_val = 24000000, .delay = 2},
+          {.seq_type = SENSOR_GPIO, .config_val = 2, .delay = 2},
+        },
+        .size = 9,
+        .power_down_setting_a = {
+          {.seq_type = SENSOR_GPIO, .delay = 10},
+          {.seq_type = SENSOR_CLK, .delay = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 4},
+          {.seq_type = SENSOR_VREG, .seq_val = 3, .delay = 1},
+          {.seq_type = SENSOR_GPIO, .seq_val = 6},
+          {.seq_type = SENSOR_VREG, .seq_val = 1},
+          {.seq_type = SENSOR_VREG},
+          {.seq_type = SENSOR_VREG, .seq_val = 2},
+        },
+        .size_down = 8,
+      },
+      .is_init_params_valid = 0,
+      .sensor_init_params = {.modes_supported = 1, .position = BACK_CAMERA_B, .sensor_mount_angle = 360},
+      .output_format = MSM_SENSOR_BAYER,
+    };
+  }
+  slave_info.power_setting_array.power_setting =
+    (struct msm_sensor_power_setting *)&slave_info.power_setting_array.power_setting_a[0];
+  slave_info.power_setting_array.power_down_setting =
+    (struct msm_sensor_power_setting *)&slave_info.power_setting_array.power_down_setting_a[0];
+  sensor_init_cfg_data sensor_init_cfg = {.cfgtype = CFG_SINIT_PROBE, .cfg.setting = &slave_info};
+  err = cam_ioctl(sensorinit_fd, VIDIOC_MSM_SENSOR_INIT_CFG, &sensor_init_cfg, "sensor init cfg (road)");
+  assert(err >= 0);
+
+  struct msm_camera_sensor_slave_info slave_info2 = {0};
+  if (s->device == DEVICE_LP3) {
+    slave_info2 = (struct msm_camera_sensor_slave_info){
+      .sensor_name = "ov8865_sunny",
+      .eeprom_name = "ov8865_plus",
+      .actuator_name = "",
+      .ois_name = "",
+      .flash_name = "",
+      .camera_id = CAMERA_2,
+      .slave_addr = 108,
+      .i2c_freq_mode = I2C_FAST_MODE,
+      .addr_type = MSM_CAMERA_I2C_WORD_ADDR,
+      .sensor_id_info = {.sensor_id_reg_addr = 12299, .sensor_id = 34917, .module_id = 2},
+      .power_setting_array = {
+        .power_setting_a = {
+          {.seq_type = SENSOR_GPIO, .delay = 5},
+          {.seq_type = SENSOR_VREG, .seq_val = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 2},
+          {.seq_type = SENSOR_VREG},
+          {.seq_type = SENSOR_CLK, .config_val = 24000000, .delay = 1},
+          {.seq_type = SENSOR_GPIO, .config_val = 2, .delay = 1},
+        },
+        .size = 6,
+        .power_down_setting_a = {
+          {.seq_type = SENSOR_GPIO, .delay = 5},
+          {.seq_type = SENSOR_CLK, .delay = 1},
+          {.seq_type = SENSOR_VREG},
+          {.seq_type = SENSOR_VREG, .seq_val = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 2, .delay = 1},
+        },
+        .size_down = 5,
+      },
+      .is_init_params_valid = 0,
+      .sensor_init_params = {.modes_supported = 1, .position = FRONT_CAMERA_B, .sensor_mount_angle = 270},
+      .output_format = MSM_SENSOR_BAYER,
+    };
+  } else if (s->driver_cam.camera_id == CAMERA_ID_S5K3P8SP) {
+    // init driver camera
+    slave_info2 = (struct msm_camera_sensor_slave_info){
+      .sensor_name = "s5k3p8sp",
+      .eeprom_name = "s5k3p8sp_m24c64s",
+      .actuator_name = "",
+      .ois_name = "",
+      .camera_id = CAMERA_1,
+      .slave_addr = 32,
+      .i2c_freq_mode = I2C_FAST_MODE,
+      .addr_type = MSM_CAMERA_I2C_WORD_ADDR,
+      .sensor_id_info = {.sensor_id = 12552},
+      .power_setting_array = {
+        .power_setting_a = {
+          {.seq_type = SENSOR_GPIO, .delay = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 2, .delay = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 1, .delay = 1},
+          {.seq_type = SENSOR_VREG, .delay = 1},
+          {.seq_type = SENSOR_CLK, .config_val = 24000000, .delay = 1},
+          {.seq_type = SENSOR_GPIO, .config_val = 2, .delay = 1},
+        },
+        .size = 6,
+        .power_down_setting_a = {
+          {.seq_type = SENSOR_CLK, .delay = 1},
+          {.seq_type = SENSOR_GPIO, .delay = 1},
+          {.seq_type = SENSOR_VREG, .delay = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 1, .delay = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 2, .delay = 1},
+        },
+        .size_down = 5,
+      },
+      .is_init_params_valid = 0,
+      .sensor_init_params = {.modes_supported = 1, .position = FRONT_CAMERA_B, .sensor_mount_angle = 270},
+      .output_format = MSM_SENSOR_BAYER,
+    };
+  } else {
+    // init driver camera
+    slave_info2 = (struct msm_camera_sensor_slave_info){
+      .sensor_name = "imx179",
+      .eeprom_name = "sony_imx179",
+      .actuator_name = "",
+      .ois_name = "",
+      .camera_id = CAMERA_1,
+      .slave_addr = 32,
+      .i2c_freq_mode = I2C_FAST_MODE,
+      .addr_type = MSM_CAMERA_I2C_WORD_ADDR,
+      .sensor_id_info = {.sensor_id_reg_addr = 2, .sensor_id = 377, .sensor_id_mask = 4095},
+      .power_setting_array = {
+        .power_setting_a = {
+          {.seq_type = SENSOR_VREG, .seq_val = 2},
+          {.seq_type = SENSOR_VREG, .seq_val = 1},
+          {.seq_type = SENSOR_VREG},
+          {.seq_type = SENSOR_GPIO, .config_val = 2},
+          {.seq_type = SENSOR_CLK, .config_val = 24000000},
+        },
+        .size = 5,
+        .power_down_setting_a = {
+          {.seq_type = SENSOR_CLK},
+          {.seq_type = SENSOR_GPIO, .delay = 1},
+          {.seq_type = SENSOR_VREG, .delay = 2},
+          {.seq_type = SENSOR_VREG, .seq_val = 1},
+          {.seq_type = SENSOR_VREG, .seq_val = 2},
+        },
+        .size_down = 5,
+      },
+      .is_init_params_valid = 0,
+      .sensor_init_params = {.modes_supported = 1, .position = FRONT_CAMERA_B, .sensor_mount_angle = 270},
+      .output_format = MSM_SENSOR_BAYER,
+    };
+  }
+  slave_info2.power_setting_array.power_setting =
+    (struct msm_sensor_power_setting *)&slave_info2.power_setting_array.power_setting_a[0];
+  slave_info2.power_setting_array.power_down_setting =
+    (struct msm_sensor_power_setting *)&slave_info2.power_setting_array.power_down_setting_a[0];
+  sensor_init_cfg.cfgtype = CFG_SINIT_PROBE;
+  sensor_init_cfg.cfg.setting = &slave_info2;
+  err = cam_ioctl(sensorinit_fd, VIDIOC_MSM_SENSOR_INIT_CFG, &sensor_init_cfg, "sensor init cfg (driver)");
+  assert(err >= 0);
 }

 static void camera_open(CameraState *s, bool is_road_cam) {
+  int err;
+
  struct csid_cfg_data csid_cfg_data = {};
  struct v4l2_event_subscription sub = {};

  struct msm_actuator_cfg_data actuator_cfg_data = {};
+  struct msm_ois_cfg_data ois_cfg_data = {};

  // open devices
  const char *sensor_dev;
@@ -423,19 +716,45 @@ static void camera_open(CameraState *s, bool is_road_cam) {
    assert(s->csid_fd >= 0);
    s->csiphy_fd = open("/dev/v4l-subdev0", O_RDWR | O_NONBLOCK);
    assert(s->csiphy_fd >= 0);
-    sensor_dev = "/dev/v4l-subdev17";
-    s->isp_fd = open("/dev/v4l-subdev13", O_RDWR | O_NONBLOCK);
+    if (s->device == DEVICE_LP3) {
+      sensor_dev = "/dev/v4l-subdev17";
+    } else {
+      sensor_dev = "/dev/v4l-subdev18";
+    }
+    if (s->device == DEVICE_LP3) {
+      s->isp_fd = open("/dev/v4l-subdev13", O_RDWR | O_NONBLOCK);
+    } else {
+      s->isp_fd = open("/dev/v4l-subdev14", O_RDWR | O_NONBLOCK);
+    }
    assert(s->isp_fd >= 0);
+    s->eeprom_fd = open("/dev/v4l-subdev8", O_RDWR | O_NONBLOCK);
+    assert(s->eeprom_fd >= 0);
+
    s->actuator_fd = open("/dev/v4l-subdev7", O_RDWR | O_NONBLOCK);
    assert(s->actuator_fd >= 0);
+
+    if (s->device != DEVICE_LP3) {
+      s->ois_fd = open("/dev/v4l-subdev10", O_RDWR | O_NONBLOCK);
+      assert(s->ois_fd >= 0);
+    }
  } else {
    s->csid_fd = open("/dev/v4l-subdev5", O_RDWR | O_NONBLOCK);
    assert(s->csid_fd >= 0);
    s->csiphy_fd = open("/dev/v4l-subdev2", O_RDWR | O_NONBLOCK);
    assert(s->csiphy_fd >= 0);
-    sensor_dev = "/dev/v4l-subdev18";
-    s->isp_fd = open("/dev/v4l-subdev14", O_RDWR | O_NONBLOCK);
+    if (s->device == DEVICE_LP3) {
+      sensor_dev = "/dev/v4l-subdev18";
+    } else {
+      sensor_dev = "/dev/v4l-subdev19";
+    }
+    if (s->device == DEVICE_LP3) {
+      s->isp_fd = open("/dev/v4l-subdev14", O_RDWR | O_NONBLOCK);
+    } else {
+      s->isp_fd = open("/dev/v4l-subdev15", O_RDWR | O_NONBLOCK);
+    }
    assert(s->isp_fd >= 0);
+    s->eeprom_fd = open("/dev/v4l-subdev9", O_RDWR | O_NONBLOCK);
+    assert(s->eeprom_fd >= 0);
  }

  // wait for sensor device
@@ -454,7 +773,7 @@ static void camera_open(CameraState *s, bool is_road_cam) {
  struct msm_camera_csi_lane_params csi_lane_params = {0};
  csi_lane_params.csi_lane_mask = 0x1f;
  csiphy_cfg_data csiphy_cfg_data = { .cfg.csi_lane_params = &csi_lane_params, .cfgtype = CSIPHY_RELEASE};
-  int err = cam_ioctl(s->csiphy_fd, VIDIOC_MSM_CSIPHY_IO_CFG, &csiphy_cfg_data, "release csiphy");
+  err = cam_ioctl(s->csiphy_fd, VIDIOC_MSM_CSIPHY_IO_CFG, &csiphy_cfg_data, "release csiphy");

  // CSID: release csid
  csid_cfg_data.cfgtype = CSID_RELEASE;
@@ -468,6 +787,12 @@ static void camera_open(CameraState *s, bool is_road_cam) {
  actuator_cfg_data.cfgtype = CFG_ACTUATOR_POWERDOWN;
  cam_ioctl(s->actuator_fd, VIDIOC_MSM_ACTUATOR_CFG, &actuator_cfg_data, "actuator powerdown");

+  if (is_road_cam && s->device != DEVICE_LP3) {
+    // ois powerdown
+    ois_cfg_data.cfgtype = CFG_OIS_POWERDOWN;
+    err = cam_ioctl(s->ois_fd, VIDIOC_MSM_OIS_CFG, &ois_cfg_data, "ois powerdown");
+  }
+
  // reset isp
  // struct msm_vfe_axi_halt_cmd halt_cmd = {
  //   .stop_camif = 1,
@@ -493,6 +818,8 @@ static void camera_open(CameraState *s, bool is_road_cam) {
  // **** GO GO GO ****
  LOG("******************** GO GO GO ************************");

+  s->eeprom = get_eeprom(s->eeprom_fd, &s->eeprom_size);
+
  // CSID: init csid
  csid_cfg_data.cfgtype = CSID_INIT;
  cam_ioctl(s->csid_fd, VIDIOC_MSM_CSID_IO_CFG, &csid_cfg_data, "init csid");
@@ -522,6 +849,10 @@ static void camera_open(CameraState *s, bool is_road_cam) {
  // SENSOR: send i2c configuration
  if (s->camera_id == CAMERA_ID_IMX298) {
    err = sensor_write_regs(s, init_array_imx298, std::size(init_array_imx298), MSM_CAMERA_I2C_BYTE_DATA);
+  } else if  (s->camera_id == CAMERA_ID_S5K3P8SP) {
+    err = sensor_write_regs(s, init_array_s5k3p8sp, std::size(init_array_s5k3p8sp), MSM_CAMERA_I2C_WORD_DATA);
+  } else if (s->camera_id == CAMERA_ID_IMX179) {
+    err = sensor_write_regs(s, init_array_imx179, std::size(init_array_imx179), MSM_CAMERA_I2C_BYTE_DATA);
  } else if (s->camera_id == CAMERA_ID_OV8865) {
    err = sensor_write_regs(s, init_array_ov8865, std::size(init_array_ov8865), MSM_CAMERA_I2C_BYTE_DATA);
  } else {
@@ -537,56 +868,137 @@ static void camera_open(CameraState *s, bool is_road_cam) {
    actuator_cfg_data.cfgtype = CFG_ACTUATOR_INIT;
    cam_ioctl(s->actuator_fd, VIDIOC_MSM_ACTUATOR_CFG, &actuator_cfg_data, "actuator init");

-    struct msm_actuator_reg_params_t actuator_reg_params[] = {
-      {
-        .reg_write_type = MSM_ACTUATOR_WRITE_DAC,
-        // MSB here at address 3
-        .reg_addr = 3,
-        .data_type = 9,
-        .addr_type = 4,
-      },
-    };
+    // no OIS in LP3
+    if (s->device != DEVICE_LP3) {
+      // see sony_imx298_eeprom_format_afdata in libmmcamera_sony_imx298_eeprom.so
+      const float far_margin = -0.28;
+      uint16_t macro_dac = *(uint16_t*)(s->eeprom + 0x24);
+      s->infinity_dac = *(uint16_t*)(s->eeprom + 0x26);
+      LOG("macro_dac: %d infinity_dac: %d", macro_dac, s->infinity_dac);

-    struct reg_settings_t actuator_init_settings[] = {
-      { .reg_addr=2, .addr_type=MSM_ACTUATOR_BYTE_ADDR, .reg_data=1, .data_type = MSM_ACTUATOR_BYTE_DATA, .i2c_operation = MSM_ACT_WRITE, .delay = 0 },   // PD = power down
-      { .reg_addr=2, .addr_type=MSM_ACTUATOR_BYTE_ADDR, .reg_data=0, .data_type = MSM_ACTUATOR_BYTE_DATA, .i2c_operation = MSM_ACT_WRITE, .delay = 2 },   // 0 = power up
-      { .reg_addr=2, .addr_type=MSM_ACTUATOR_BYTE_ADDR, .reg_data=2, .data_type = MSM_ACTUATOR_BYTE_DATA, .i2c_operation = MSM_ACT_WRITE, .delay = 2 },   // RING = SAC mode
-      { .reg_addr=6, .addr_type=MSM_ACTUATOR_BYTE_ADDR, .reg_data=64, .data_type = MSM_ACTUATOR_BYTE_DATA, .i2c_operation = MSM_ACT_WRITE, .delay = 0 },  // 0x40 = SAC3 mode
-      { .reg_addr=7, .addr_type=MSM_ACTUATOR_BYTE_ADDR, .reg_data=113, .data_type = MSM_ACTUATOR_BYTE_DATA, .i2c_operation = MSM_ACT_WRITE, .delay = 0 },
-      // 0x71 = DIV1 | DIV0 | SACT0 -- Tvib x 1/4 (quarter)
-      // SAC Tvib = 6.3 ms + 0.1 ms = 6.4 ms / 4 = 1.6 ms
-      // LSC 1-step = 252 + 1*4 = 256 ms / 4 = 64 ms
-    };
+      int dac_range = macro_dac - s->infinity_dac;
+      s->infinity_dac += far_margin * dac_range;

-    struct region_params_t region_params[] = {
-      {.step_bound = {238, 0,}, .code_per_step = 235, .qvalue = 128}
-    };
+      LOG(" -> macro_dac: %d infinity_dac: %d", macro_dac, s->infinity_dac);

-    actuator_cfg_data.cfgtype = CFG_SET_ACTUATOR_INFO;
-    actuator_cfg_data.cfg.set_info = (struct msm_actuator_set_info_t){
-      .actuator_params = {
-        .act_type = ACTUATOR_BIVCM,
-        .reg_tbl_size = 1,
-        .data_size = 10,
-        .init_setting_size = 5,
-        .i2c_freq_mode = I2C_STANDARD_MODE,
-        .i2c_addr = 24,
-        .i2c_addr_type = MSM_ACTUATOR_BYTE_ADDR,
-        .i2c_data_type = MSM_ACTUATOR_WORD_DATA,
-        .reg_tbl_params = &actuator_reg_params[0],
-        .init_settings = &actuator_init_settings[0],
-        .park_lens = {.damping_step = 1023, .damping_delay = 14000, .hw_params = 11, .max_step = 20},
-      },
-      .af_tuning_params = {
-        .initial_code = INFINITY_DAC,
-        .pwd_step = 0,
-        .region_size = 1,
-        .total_steps = 238,
-        .region_params = &region_params[0],
-      },
-    };
+      struct msm_actuator_reg_params_t actuator_reg_params[] = {
+        {.reg_write_type = MSM_ACTUATOR_WRITE_DAC, .reg_addr = 240, .data_type = 10, .addr_type = 4},
+        {.reg_write_type = MSM_ACTUATOR_WRITE_DAC, .reg_addr = 241, .data_type = 10, .addr_type = 4},
+        {.reg_write_type = MSM_ACTUATOR_WRITE_DAC, .reg_addr = 242, .data_type = 10, .addr_type = 4},
+        {.reg_write_type = MSM_ACTUATOR_WRITE_DAC, .reg_addr = 243, .data_type = 10, .addr_type = 4},
+      };

-    cam_ioctl(s->actuator_fd, VIDIOC_MSM_ACTUATOR_CFG, &actuator_cfg_data, "actuator set info");
+      //...
+      struct reg_settings_t actuator_init_settings[1] = {0};
+
+      struct region_params_t region_params[] = {
+        {.step_bound = {512, 0,}, .code_per_step = 118, .qvalue = 128}
+      };
+
+      actuator_cfg_data.cfgtype = CFG_SET_ACTUATOR_INFO;
+      actuator_cfg_data.cfg.set_info = (struct msm_actuator_set_info_t){
+        .actuator_params = {
+          .act_type = ACTUATOR_VCM,
+          .reg_tbl_size = 4,
+          .data_size = 10,
+          .init_setting_size = 0,
+          .i2c_freq_mode = I2C_CUSTOM_MODE,
+          .i2c_addr = 28,
+          .i2c_addr_type = MSM_ACTUATOR_BYTE_ADDR,
+          .i2c_data_type = MSM_ACTUATOR_BYTE_DATA,
+          .reg_tbl_params = &actuator_reg_params[0],
+          .init_settings = &actuator_init_settings[0],
+          .park_lens = {
+            .damping_step = 1023,
+            .damping_delay = 15000,
+            .hw_params = 58404,
+            .max_step = 20,
+          }
+        },
+        .af_tuning_params =   {
+          .initial_code = (int16_t)s->infinity_dac,
+          .pwd_step = 0,
+          .region_size = 1,
+          .total_steps = 512,
+          .region_params = &region_params[0],
+        },
+      };
+      err = cam_ioctl(s->actuator_fd, VIDIOC_MSM_ACTUATOR_CFG, &actuator_cfg_data, "actuator set info");
+
+      // power up ois
+      ois_cfg_data.cfgtype = CFG_OIS_POWERUP;
+      err = cam_ioctl(s->ois_fd, VIDIOC_MSM_OIS_CFG, &ois_cfg_data, "ois powerup");
+
+      ois_cfg_data.cfgtype = CFG_OIS_INIT;
+      err = cam_ioctl(s->ois_fd, VIDIOC_MSM_OIS_CFG, &ois_cfg_data, "ois init");
+
+      ois_cfg_data.cfgtype = CFG_OIS_CONTROL;
+      ois_cfg_data.cfg.set_info.ois_params = (struct msm_ois_params_t){
+        // .data_size = 26312,
+        .setting_size = 120,
+        .i2c_addr = 28,
+        .i2c_freq_mode = I2C_CUSTOM_MODE,
+        // .i2c_addr_type = wtf
+        // .i2c_data_type = wtf
+        .settings = &ois_init_settings[0],
+      };
+      cam_ioctl(s->ois_fd, VIDIOC_MSM_OIS_CFG, &ois_cfg_data, "ois init settings");
+    } else {
+      // leeco actuator (DW9800W H-Bridge Driver IC)
+      // from sniff
+      s->infinity_dac = 364;
+
+      struct msm_actuator_reg_params_t actuator_reg_params[] = {
+        {
+          .reg_write_type = MSM_ACTUATOR_WRITE_DAC,
+          // MSB here at address 3
+          .reg_addr = 3,
+          .data_type = 9,
+          .addr_type = 4,
+        },
+      };
+
+      struct reg_settings_t actuator_init_settings[] = {
+        { .reg_addr=2, .addr_type=MSM_ACTUATOR_BYTE_ADDR, .reg_data=1, .data_type = MSM_ACTUATOR_BYTE_DATA, .i2c_operation = MSM_ACT_WRITE, .delay = 0 },   // PD = power down
+        { .reg_addr=2, .addr_type=MSM_ACTUATOR_BYTE_ADDR, .reg_data=0, .data_type = MSM_ACTUATOR_BYTE_DATA, .i2c_operation = MSM_ACT_WRITE, .delay = 2 },   // 0 = power up
+        { .reg_addr=2, .addr_type=MSM_ACTUATOR_BYTE_ADDR, .reg_data=2, .data_type = MSM_ACTUATOR_BYTE_DATA, .i2c_operation = MSM_ACT_WRITE, .delay = 2 },   // RING = SAC mode
+        { .reg_addr=6, .addr_type=MSM_ACTUATOR_BYTE_ADDR, .reg_data=64, .data_type = MSM_ACTUATOR_BYTE_DATA, .i2c_operation = MSM_ACT_WRITE, .delay = 0 },  // 0x40 = SAC3 mode
+        { .reg_addr=7, .addr_type=MSM_ACTUATOR_BYTE_ADDR, .reg_data=113, .data_type = MSM_ACTUATOR_BYTE_DATA, .i2c_operation = MSM_ACT_WRITE, .delay = 0 },
+        // 0x71 = DIV1 | DIV0 | SACT0 -- Tvib x 1/4 (quarter)
+        // SAC Tvib = 6.3 ms + 0.1 ms = 6.4 ms / 4 = 1.6 ms
+        // LSC 1-step = 252 + 1*4 = 256 ms / 4 = 64 ms
+      };
+
+      struct region_params_t region_params[] = {
+        {.step_bound = {238, 0,}, .code_per_step = 235, .qvalue = 128}
+      };
+
+      actuator_cfg_data.cfgtype = CFG_SET_ACTUATOR_INFO;
+      actuator_cfg_data.cfg.set_info = (struct msm_actuator_set_info_t){
+        .actuator_params = {
+          .act_type = ACTUATOR_BIVCM,
+          .reg_tbl_size = 1,
+          .data_size = 10,
+          .init_setting_size = 5,
+          .i2c_freq_mode = I2C_STANDARD_MODE,
+          .i2c_addr = 24,
+          .i2c_addr_type = MSM_ACTUATOR_BYTE_ADDR,
+          .i2c_data_type = MSM_ACTUATOR_WORD_DATA,
+          .reg_tbl_params = &actuator_reg_params[0],
+          .init_settings = &actuator_init_settings[0],
+          .park_lens = {.damping_step = 1023, .damping_delay = 14000, .hw_params = 11, .max_step = 20},
+        },
+        .af_tuning_params = {
+          .initial_code = (int16_t)s->infinity_dac,
+          .pwd_step = 0,
+          .region_size = 1,
+          .total_steps = 238,
+          .region_params = &region_params[0],
+        },
+      };
+
+      cam_ioctl(s->actuator_fd, VIDIOC_MSM_ACTUATOR_CFG, &actuator_cfg_data, "actuator set info");
+    }
  }

  if (s->camera_id == CAMERA_ID_IMX298) {
@@ -598,6 +1010,10 @@ static void camera_open(CameraState *s, bool is_road_cam) {
  struct msm_camera_csiphy_params csiphy_params = {};
  if (s->camera_id == CAMERA_ID_IMX298) {
    csiphy_params = {.lane_cnt = 4, .settle_cnt = 14, .lane_mask = 0x1f, .csid_core = 0};
+  } else if (s->camera_id == CAMERA_ID_S5K3P8SP) {
+    csiphy_params = {.lane_cnt = 4, .settle_cnt = 24, .lane_mask = 0x1f, .csid_core = 0};
+  } else if (s->camera_id == CAMERA_ID_IMX179) {
+    csiphy_params = {.lane_cnt = 4, .settle_cnt = 11, .lane_mask = 0x1f, .csid_core = 2};
  } else if (s->camera_id == CAMERA_ID_OV8865) {
    // guess!
    csiphy_params = {.lane_cnt = 4, .settle_cnt = 24, .lane_mask = 0x1f, .csid_core = 2};
@@ -728,24 +1144,47 @@ static void camera_open(CameraState *s, bool is_road_cam) {
  cam_ioctl(s->isp_fd, VIDIOC_MSM_ISP_CFG_STREAM, &s->stream_cfg, "isp start stream");
 }

+static struct damping_params_t actuator_ringing_params = {
+  .damping_step = 1023,
+  .damping_delay = 15000,
+  .hw_params = 0x0000e422,
+};
+
 static void road_camera_start(CameraState *s) {
+  struct msm_actuator_cfg_data actuator_cfg_data = {0};
+
  set_exposure(s, 1.0, 1.0);
+  int inf_step;

  int err = sensor_write_regs(s, start_reg_array, std::size(start_reg_array), MSM_CAMERA_I2C_BYTE_DATA);
  LOG("sensor start regs: %d", err);

-  int inf_step = 512 - INFINITY_DAC;
+  if (s->device != DEVICE_LP3) {
+    imx298_ois_calibration(s->ois_fd, s->eeprom);
+    inf_step = 332 - s->infinity_dac;

-  // initial guess
-  s->lens_true_pos = 400;
+    // initial guess
+    s->lens_true_pos = 300;
+  } else {
+    // default is OP3, this is for LeEco
+    actuator_ringing_params.damping_step = 1023;
+    actuator_ringing_params.damping_delay = 20000;
+    actuator_ringing_params.hw_params = 13;
+
+    // focus on infinity assuming phone is perpendicular
+    inf_step = 512 - s->infinity_dac;
+
+    // initial guess
+    s->lens_true_pos = 400;
+  }

  // reset lens position
-  struct msm_actuator_cfg_data actuator_cfg_data = {};
+  memset(&actuator_cfg_data, 0, sizeof(actuator_cfg_data));
  actuator_cfg_data.cfgtype = CFG_SET_POSITION;
  actuator_cfg_data.cfg.setpos = (struct msm_actuator_set_position_t){
    .number_of_steps = 1,
-    .hw_params = (uint32_t)7,
-    .pos = {INFINITY_DAC, 0},
+    .hw_params = (uint32_t)((s->device != DEVICE_LP3) ? 0x0000e424 : 7),
+    .pos = {s->infinity_dac, 0},
    .delay = {0,}
  };
  cam_ioctl(s->actuator_fd, VIDIOC_MSM_ACTUATOR_CFG, &actuator_cfg_data, "actuator set pos");
@@ -773,16 +1212,11 @@ static void road_camera_start(CameraState *s) {
 }

 void actuator_move(CameraState *s, uint16_t target) {
+  int step = target - s->cur_lens_pos;
  // LP3 moves only on even positions. TODO: use proper sensor params
-
-  // focus on infinity assuming phone is perpendicular
-  static struct damping_params_t actuator_ringing_params = {
-      .damping_step = 1023,
-      .damping_delay = 20000,
-      .hw_params = 13,
-  };
-
-  int step = (target - s->cur_lens_pos) / 2;
+  if (s->device == DEVICE_LP3) {
+    step /= 2;
+  }

  int dest_step_pos = s->cur_step_pos + step;
  dest_step_pos = std::clamp(dest_step_pos, 0, 255);
@@ -867,6 +1301,9 @@ static std::optional<float> get_accel_z(SubMaster *sm) {
 }

 static void do_autofocus(CameraState *s, SubMaster *sm) {
+  const int dac_down = s->device == DEVICE_LP3 ? LP3_AF_DAC_DOWN : OP3T_AF_DAC_DOWN;
+  const int dac_up = s->device == DEVICE_LP3 ? LP3_AF_DAC_UP : OP3T_AF_DAC_UP;
+
  float lens_true_pos = s->lens_true_pos.load();
  if (!isnan(s->focus_err)) {
    // learn lens_true_pos
@@ -879,8 +1316,8 @@ static void do_autofocus(CameraState *s, SubMaster *sm) {
  }
  const float sag = (s->last_sag_acc_z / 9.8) * 128;
  // stay off the walls
-  lens_true_pos = std::clamp(lens_true_pos, float(LP3_AF_DAC_DOWN), float(LP3_AF_DAC_UP));
-  int target = std::clamp(lens_true_pos - sag, float(LP3_AF_DAC_DOWN), float(LP3_AF_DAC_UP));
+  lens_true_pos = std::clamp(lens_true_pos, float(dac_down), float(dac_up));
+  int target = std::clamp(lens_true_pos - sag, float(dac_down), float(dac_up));
  s->lens_true_pos.store(lens_true_pos);

  /*char debug[4096];
@@ -935,7 +1372,11 @@ void cameras_open(MultiCameraState *s) {
  s->v4l_fd = open("/dev/video0", O_RDWR | O_NONBLOCK);
  assert(s->v4l_fd >= 0);

-  s->ispif_fd = open("/dev/v4l-subdev15", O_RDWR | O_NONBLOCK);
+  if (s->device == DEVICE_LP3) {
+    s->ispif_fd = open("/dev/v4l-subdev15", O_RDWR | O_NONBLOCK);
+  } else {
+    s->ispif_fd = open("/dev/v4l-subdev16", O_RDWR | O_NONBLOCK);
+  }
  assert(s->ispif_fd >= 0);

  // ISPIF: stop
@@ -996,6 +1437,7 @@ static void camera_close(CameraState *s) {
      cam_ioctl(s->isp_fd, VIDIOC_MSM_ISP_RELEASE_STREAM, &stream_release, "isp release stream");
    }
  }
+  free(s->eeprom);
 }

 const char* get_isp_event_name(uint32_t type) {
@@ -1066,19 +1508,24 @@ static void ops_thread(MultiCameraState *s) {
 }

 static void setup_self_recover(CameraState *c, const uint16_t *lapres, size_t lapres_size) {
+  const int dac_down = c->device == DEVICE_LP3 ? LP3_AF_DAC_DOWN : OP3T_AF_DAC_DOWN;
+  const int dac_up = c->device == DEVICE_LP3 ? LP3_AF_DAC_UP : OP3T_AF_DAC_UP;
+  const int dac_m = c->device == DEVICE_LP3 ? LP3_AF_DAC_M : OP3T_AF_DAC_M;
+  const int dac_3sig = c->device == DEVICE_LP3 ? LP3_AF_DAC_3SIG : OP3T_AF_DAC_3SIG;
+
  const float lens_true_pos = c->lens_true_pos.load();
  int self_recover = c->self_recover.load();
-  if (self_recover < 2 && (lens_true_pos < (LP3_AF_DAC_DOWN + 1) || lens_true_pos > (LP3_AF_DAC_UP - 1)) && is_blur(lapres, lapres_size)) {
+  if (self_recover < 2 && (lens_true_pos < (dac_down + 1) || lens_true_pos > (dac_up - 1)) && is_blur(lapres, lapres_size)) {
    // truly stuck, needs help
    if (--self_recover < -FOCUS_RECOVER_PATIENCE) {
      LOGD("road camera bad state detected. attempting recovery from %.1f, recover state is %d", lens_true_pos, self_recover);
      // parity determined by which end is stuck at
-      self_recover = FOCUS_RECOVER_STEPS + (lens_true_pos < LP3_AF_DAC_M ? 1 : 0);
+      self_recover = FOCUS_RECOVER_STEPS + (lens_true_pos < dac_m ? 1 : 0);
    }
-  } else if (self_recover < 2 && (lens_true_pos < (LP3_AF_DAC_M - LP3_AF_DAC_3SIG) || lens_true_pos > (LP3_AF_DAC_M + LP3_AF_DAC_3SIG))) {
+  } else if (self_recover < 2 && (lens_true_pos < (dac_m - dac_3sig) || lens_true_pos > (dac_m + dac_3sig))) {
    // in suboptimal position with high prob, but may still recover by itself
    if (--self_recover < -(FOCUS_RECOVER_PATIENCE * 3)) {
-      self_recover = FOCUS_RECOVER_STEPS / 2 + (lens_true_pos < LP3_AF_DAC_M ? 1 : 0);
+      self_recover = FOCUS_RECOVER_STEPS / 2 + (lens_true_pos < dac_m ? 1 : 0);
    }
  } else if (self_recover < 0) {
    self_recover += 1;  // reset if fine
--- a/selfdrive/camerad/cameras/camera_qcom.h
+++ b/selfdrive/camerad/cameras/camera_qcom.h
@@ -18,12 +18,20 @@
 #define FRAME_BUF_COUNT 4
 #define METADATA_BUF_COUNT 4

+#define DEVICE_OP3 0
+#define DEVICE_OP3T 1
+#define DEVICE_LP3 2
+
 #define NUM_FOCUS 8

 #define LP3_AF_DAC_DOWN 366
 #define LP3_AF_DAC_UP 634
 #define LP3_AF_DAC_M 440
 #define LP3_AF_DAC_3SIG 52
+#define OP3T_AF_DAC_DOWN 224
+#define OP3T_AF_DAC_UP 456
+#define OP3T_AF_DAC_M 300
+#define OP3T_AF_DAC_3SIG 96

 #define FOCUS_RECOVER_PATIENCE 50 // 2.5 seconds of complete blur
 #define FOCUS_RECOVER_STEPS 240 // 6 seconds
@@ -42,6 +50,7 @@ typedef struct StreamState {
 typedef struct CameraState {
  int camera_num;
  int camera_id;
+  int device;

  int fps;
  CameraInfo ci;
@@ -74,7 +83,7 @@ typedef struct CameraState {
  camera_apply_exposure_func apply_exposure;

  // rear camera only,used for focusing
-  unique_fd actuator_fd;
+  unique_fd actuator_fd, ois_fd, eeprom_fd;
  std::atomic<float> focus_err;
  std::atomic<float> last_sag_acc_z;
  std::atomic<float> lens_true_pos;
@@ -83,10 +92,15 @@ typedef struct CameraState {
  uint16_t cur_lens_pos;
  int16_t focus[NUM_FOCUS];
  uint8_t confidence[NUM_FOCUS];
+  uint16_t infinity_dac;
+  size_t eeprom_size;
+  uint8_t *eeprom;
 } CameraState;


 typedef struct MultiCameraState {
+  int device;
+
  unique_fd ispif_fd;
  unique_fd msmcfg_fd;
  unique_fd v4l_fd;
--- a/selfdrive/camerad/cameras/sensor_i2c.h
+++ b/selfdrive/camerad/cameras/sensor_i2c.h
--- a/selfdrive/camerad/main.cc
+++ b/selfdrive/camerad/main.cc
@@ -21,6 +21,8 @@
 #include "selfdrive/camerad/cameras/camera_qcom2.h"
 #elif WEBCAM
 #include "selfdrive/camerad/cameras/camera_webcam.h"
+#elif MIPI
+#include "selfdrive/camerad/cameras/camera_mipi.h"
 #else
 #include "selfdrive/camerad/cameras/camera_frame_stream.h"
 #endif
@@ -49,6 +51,8 @@ int main(int argc, char *argv[]) {
    set_core_affinity(2);
  } else if (Hardware::TICI()) {
    set_core_affinity(6);
+  } else if (Hardware::JETSON()) {
+    set_core_affinity(4);
  }

  cl_device_id device_id = cl_get_device_id(CL_DEVICE_TYPE_DEFAULT);
--- a/selfdrive/camerad/snapshot/snapshot.py
+++ b/selfdrive/camerad/snapshot/snapshot.py
@@ -10,7 +10,7 @@ from typing import List
 import cereal.messaging as messaging
 from common.params import Params
 from common.realtime import DT_MDL
-from common.transformations.camera import eon_f_frame_size, eon_d_frame_size, tici_f_frame_size
+from common.transformations.camera import eon_f_frame_size, eon_d_frame_size, leon_d_frame_size, tici_f_frame_size
 from selfdrive.hardware import TICI
 from selfdrive.controls.lib.alertmanager import set_offroad_alert
 from selfdrive.manager.process_config import managed_processes
@@ -39,7 +39,7 @@ def rois_in_focus(lapres: List[float]) -> float:


 def get_snapshots(frame="roadCameraState", front_frame="driverCameraState", focus_perc_threshold=0.):
-  frame_sizes = [eon_f_frame_size, eon_d_frame_size, tici_f_frame_size]
+  frame_sizes = [eon_f_frame_size, eon_d_frame_size, leon_d_frame_size, tici_f_frame_size]
  frame_sizes = {w * h: (w, h) for (w, h) in frame_sizes}

  sockets = []
--- a/Show More
+++ b/Show More
				`@@ -0,0 +1 @@`
				`from="10.0.0.0/8,172.16.0.0/12,192.168.0.0/16" ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC+iXXq30Tq+J5NKat3KWHCzcmwZ55nGh6WggAqECa5CasBlM9VeROpVu3beA+5h0MibRgbD4DMtVXBt6gEvZ8nd04E7eLA9LTZyFDZ7SkSOVj4oXOQsT0GnJmKrASW5KslTWqVzTfo2XCtZ+004ikLxmyFeBO8NOcErW1pa8gFdQDToH9FrA7kgysic/XVESTOoe7XlzRoe/eZacEQ+jtnmFd21A4aEADkk00Ahjr0uKaJiLUAPatxs2icIXWpgYtfqqtaKF23wSt61OTu6cAwXbOWr3m+IUSRUO0IRzEIQS3z1jfd1svgzSgSSwZ1Lhj4AoKxIEAIc8qJrO4uymCJ public`