mirror of
https://github.com/firestar5683/StarPilot.git
synced 2026-08-17 22:33:43 +08:00
Alexandre Nobuharu Sato
5a28b0c9fe
* Update max_lat_accel.py The error you're encountering is due to the fact that the code is trying to calculate the 90th percentile of lateral acceleration values that are less than 0, but there are no such values in the dataset. This results in an empty list, which causes the np.percentile function to fail with an IndexError * fix * simpler --------- Co-authored-by: Shane Smiskol <shane@smiskol.com>
debug scripts
can_printer.py
usage: can_printer.py [-h] [--bus BUS] [--max_msg MAX_MSG] [--addr ADDR]
simple CAN data viewer
optional arguments:
-h, --help show this help message and exit
--bus BUS CAN bus to print out (default: 0)
--max_msg MAX_MSG max addr (default: None)
--addr ADDR
dump.py
usage: dump.py [-h] [--pipe] [--raw] [--json] [--dump-json] [--no-print] [--addr ADDR] [--values VALUES] [socket [socket ...]]
Dump communication sockets. See cereal/services.py for a complete list of available sockets.
positional arguments:
socket socket names to dump. defaults to all services defined in cereal
optional arguments:
-h, --help show this help message and exit
--pipe
--raw
--json
--dump-json
--no-print
--addr ADDR
--values VALUES values to monitor (instead of entire event)
vw_mqb_config.py
usage: vw_mqb_config.py [-h] [--debug] {enable,show,disable}
Shows Volkswagen EPS software and coding info, and enables or disables Heading Control
Assist (Lane Assist). Useful for enabling HCA on cars without factory Lane Assist that want
to use openpilot integrated at the CAN gateway (J533).
positional arguments:
{enable,show,disable}
show or modify current EPS HCA config
optional arguments:
-h, --help show this help message and exit
--debug enable ISO-TP/UDS stack debugging output
This tool is meant to run directly on a vehicle-installed comma three, with
the openpilot/tmux processes stopped. It should also work on a separate PC with a USB-
attached comma panda. Vehicle ignition must be on. Recommend engine not be running when
making changes. Must turn ignition off and on again for any changes to take effect.