* bump panda & cereal
* bump panda
* rest of references
* regen TOYOTA with safety param 578, TOYOTA2 with 329
* regen rest of routes
* update ref
* bump cereal
old-commit-hash: 4190d2608a536e1b28fb999a72bbf5b80810743d
* controlsd: better alert precedence for system malfunctions
* down to 20
* move that
* check can flags
* update refs
* update refs
old-commit-hash: be748c0d6a1a931a26b4ec741bbba71d4269b821
* add panda flag for toyota stock long with camera
* clean up
* Add 2022 RAV4 Hybrid from Philly
* fix wrong fw in interface, did this ever work?
* Must be a hybrid
* no radar parsing
* fix can error
* move to own platform
* generate docs
* fix
* Add 2022 Rav4 XSE Australia fingerprint parameters (#24303)
* Update values.py
Add 2022 Rav4 XSE Australia
* add commas
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* bump panda
* wait, the camera doesn't even send 0x343, right?
* use a set instead, more obvious
* don't test without a parser
* bump panda
* flip panda flag
* bump panda
* add commas
* regen and update refs
* set to none by default
* revert parenthesis
* update comment
* bump panda
* regen and update refs
* add test models and update readme
* bump to master
Co-authored-by: BrettLynch123 <34538435+BrettLynch123@users.noreply.github.com>
old-commit-hash: c1caca104f8553d485334e33446bd7b8ec1fb8ca
* only use half of the available bytes
* move to set_safety_model
* regen and update refs
* last two
* bump to master
old-commit-hash: 66dd8f934cc84cdbd3e48e7b49836ec95f82c23a
* use deque for prev_cruise_buttons
* stash
* disallow engagement if resume or decel isn't pressed
* fix buttons
* reduce chances of causing 30-frame fault
Fix clu11
drive down cancel times
* Revert "reduce chances of causing 30-frame fault"
This reverts commit 0f54c051bf5a22b1f584718ec46e78bc3a82a0dd.
* consider pause/resume button
* stash
* Revert "stash"
This reverts commit 551ca7be6c45729f0747abc81cd81894cd621c32.
* sadly some cars need 8 op frames (identical to 4 updates from CLU11)
* add main button
* 6 should be safe
* use max
* clean up
* change to 4 samples and process all messages received, like panda
* bump panda
* test: replay segments with known re-engagements on-device
* Revert "test: replay segments with known re-engagements on-device"
This reverts commit 9730c3c14f942b82b6ed5ef2e81b8ae0126f3006.
* need prev_cruise_buttons as we don't run every CAN message through carstate
* more generic
* extend
* Update selfdrive/car/interfaces.py
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* 3% faster at 1000000 loops
* update refs
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: efa98d2a0694b9a33a2fda3bebfae50fb4ba33cc
* check standstill against panda
* use XMISSION_SPEED for all, and compare to 0
* fix
* only check for Honda for now
* update comment
* update refs
* update refs and update check
* phantom commit
old-commit-hash: 6de434f2ecee89e86c011bece57cb205c4c047e3
* Initial commit
* Fix bugs
* Need more torque rate
* Cleanup cray cray control
* Write nicely
* Chiiil
* Not relevant for cray cray control
* Do some logging
* Seems like it has more torque than I thought
* Bit more feedforward
* Tune change
* Retune
* Retune
* Little more chill
* Add coroll
* Add corolla
* Give craycray a good name
* Update to proper logging
* D to the PI
* Should be in radians
* Add d
* Start oscillations
* Add D term
* Only change torque rate limits for new tune
* Add d logging
* Should be enough
* Wrong sign in D
* Downtune a little
* Needed to prevent faults
* Add lqr rav4 to tune
* Try derivative again
* Data based retune
* Data based retune
* add friction compensation
* Doesnt need too much P with friction comp
* remove lqr
* Remove kd
* Fix tests
* fix tests
* Too much error
* Get roll induced error under 1cm/deg
* Too much jitter
* Do roll comp
* Add ki
* Final update
* Update refs
* Cleanup latcontrol_torque a little more
old-commit-hash: fe0bcdaef6b1fd3fc9d855aefeba755b35dfc222
* these should be enabled
* bump panda
* bump
* allow in pre-enabled state
* bump panda
* add comment
* bump and update refs
* bump panda
* bump panda
old-commit-hash: 0f61a388c394ad5b6f25446c1e76558c1f4cead7
* control with joystick
* slow it down
* always joystick for not car
* clean ups
* not stateful
* move submaster
* only if we aren't in test mode
* update refs
* double ki speed, update ref
* this ref
Co-authored-by: Comma Device <device@comma.ai>
old-commit-hash: 7dd71cc63db66d56de069d35544be607ac1ab5b5
* non-essential ECU for logging
* bump cereal
* debug ECU
* match_fw_to_car_exact
* comment
* version instead of board date
* add old compatible value
* update_refs
old-commit-hash: 7908fb88299c6431e3495a86aafe8b0c092547e4
* body: only control while engaged
* bump panda
* remove that
* bump panda
* update refs
* update refs
old-commit-hash: 00ebd10b87d6d96f4b801879c281927cab82d27c
* Cleanup variables
* Add clips
* Add good standstill for localizer
* Need abs
* Only on startup
* Cleanup more
* remove violence
* Unused variable
* Update ref
* Not good idea for now
* Update refs again
old-commit-hash: b2b6205e252b5291a953dd94c5524715b1f8f444
* body: locationd support
* fewer hacks
* my body is never still
* body on localizer
* minor change
* move wait back to 5 secs
* update refs
* try again
Co-authored-by: nuwandavek <vivekaithal44@gmail.com>
Co-authored-by: Comma Device <device@comma.ai>
old-commit-hash: 0b9790dd24d7824746aac42cd06f7fe3a331b3c2
* Controlsd: give carcontroller angular rates
* Update cereal
* Needs to be list
* Update refs
old-commit-hash: dcece099fff5def6c6d8feea6883ab0e0ee5b661
* move some state machine logic to controlsd
move some state machine logic to controlsd
* same order
same order
* move unsafeMode up
* disable at standstill
* save last CS
save last CS
* do we need to copy at all?
* don't copy
* rename
* Update selfdrive/controls/controlsd.py
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Revert "Update selfdrive/controls/controlsd.py"
This reverts commit 10bb51a0f0ee0d8e2a27c746a0638280a5eaea8a.
* Update refs
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 5fe00fb7738358c19b7db907047353d8785b5f20
* update cereal
* run but not use
* log distraction type
* regression scaling
* clean up naming
* add calib buf
* add to header
* fake model
* no calib model
* adjust threshs
* 018a305f
* fix bn
* tweak1
* tweak2
* 0ff2/666
* tweak3
* t4
* t5
* fix out of bound
* skip when replaying old segments
* update ref
* fix onnxmodel
* get calib
* update model replay refs
* up ref
old-commit-hash: de4031c98eac2d7151bb99b787e5d68193eee1b3
* proof of concept
* actuators packet describes which actuators are active
* bump cereal
* fixes
* not needed for this PR
* Do Toyota
* add back controlsState.active
* bump cereal
* rest of cars
* in actuators
* add active back
* which
* use controlsState.active for now
* will make an issue
* Update selfdrive/controls/controlsd.py
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* move local lat_active checks into CC.latActive
* remove redundant checks
* move comment
move comment
* fix joystick mode
* get enabled from carcontrol
* do standstill check in controlsd
* make sure we consider the gas press case for GM
* use CC.actuators
* fix
* capitalization
* Bump cereal
Bump cereal
* make intermediate actuators
* similar convention to before
* clean that up
* update refs
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 629399a44925080b2c35b6dde35c093cc2e32035
Shane Smiskol