Use one saved schedule with editable zero defaults. Preserve current schedules and round displayed offsets and edits to whole units without conversion drift.
- params_keys.h: every setting in the library's manifest (python -m opendbc.bluepilot_lateral.params.manifest),
without BACKUP, which StarPilot's params don't have. disable_BP_lat_UI defaults to "1": BluePilot lateral
is off until the user turns it on.
- car init (VehicleStartupPreferences.prepare): init_ford_safety_param_starpilot ORs the library's startup
bits into the Ford param. They stay off without the openpilot toggle, in Safe Mode, or when a startup
setting can't be read.
- card (configure_controller): the Ford CarController gets a BluePilotInputs, which fills the library's
LateralInputs from modelV2, vehicleParameters and lateralDelay each frame and re-reads the per-frame
settings every 3 s.
- test_bluepilot_lateral.py: the init path's bits, the real CarController and libsafety with the same
param, for a CAN and a CAN FD Ford, off/on/on+pinion/pinion-only, curvature and angle mode: every
steering and LKA frame passes, and only angle mode with BluePilot on steers through the path angle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
StarPilot's angle-only bluepilot_lateral adaptation and the BluePilot-derived curvature strategies (Mach-E,
classic, Explorer, generic CAN FD, new-port curvature, manual-turn latch, curvature preview, pinion
measurement) are removed, with their extended safety profiles 16/32/64 and the interim angle word 128. Ford
lateral is upstream's stock curvature path until the BluePilot lateral library is mounted.
StarPilot's own Ford features stay, re-keyed from the extended words to the stock ones:
- AOL: classic 32 -> 0, Mach-E 18 and the CAN FD trucks 66 -> 2 (+1 with openpilot long); the CAN FD
retained-display rules apply to word 2. Edge/Mondeo/Transit and the manual bit (256) are unchanged.
- release CAN FD long: word 3 (was 19/67); 19 and 67 are now retired and denied.
- stock cruise switch, CAN FD camera-lead radar handling, hands-free cluster: keyed on the Ford family.
- classic stock ACC (0) keeps the no-ACCDATA TX list the extended classic profile had.
Bits 9-14 of the Ford param are reserved for the BluePilot lateral library's startup bits
(safety/modes/ford_param.h); AOL and pandad mask them out of the profile word.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Jetlink running the big model (on, supported, no Chestnut), Active Big
in Galaxy and on the device is Jetlink's choice: the model manager marks a
big model selectable when its catalog entry names the ONNX it was built from
(source_sha256), downloaded or not, since Jetlink's host fetches the ONNX
itself. The choice is the new JetlinkModel param, {sha256, displayName}, the
adapter's big-model key; Chestnut's own Active Big is left as it was. None
leaves the model to the Jetlink app, and the manager words it.
A newer choice made in the Jetlink app is written back into JetlinkModel by
jetlink, so Active Big shows the model that drives; one StarPilot does not
list is named as the app's.
JetlinkModel is a new key in params_keys.h: the native params libraries need
their usual rebuild.
- jetlinkd is ancillary: a dead owner sends the drive back to the small
model and no longer blocks engaging
- a crashed owner now restarts, as porting.md asks
- Offroad_JetlinkUnavailable says why a Jetlink the user turned on cannot
run (jetlink's reason())
- JetlinkBigModel, JetlinkCatalog and JetlinkRuntime are no longer used
params_keys.h changed: libparams_c.so, libcommon.a and the prebuilt
manifest need regenerating with the prebuilt build. Until then the
tracked params library does not know Offroad_JetlinkUnavailable, so
hardwared skips that alert (logged once) and it stays inert.
* pigeond: aid startup with last GPS position
* pigeond: aid position after receiver setup
* pigeond: fixed 100km position accuracy, skip stale positions
* store LastGPSPosition as capnp bytes
* ubloxd: save LastGPSPosition
* pigeond: send time and position once system time is valid
* pigeond: use datetime for saved position age
* pigeond: remove position accuracy comment
* pigeond: send position assistance during initialization
* Update ubloxd.py
---------
Co-authored-by: haraschax <6804392+haraschax@users.noreply.github.com>
(cherry picked from commit 1623441a9f080138570e1d37c9a261ee3511357e)
* Show pairing provider and Prime status in device settings
* remove unnecessary
* simplify
* bespoke human code
* clean
* readme
* prime layout
* sepearte qr code stuff
* move icons
* move qr code into its own widget
* clean
* Fix prime menu lint
* Update widget leak test for prime menu
* fix lint
* update to new theme
* change names
* fix font size
* get rid of subtitle
* adjust commacare icon
* drop manage, its cleaner
* edit text
* clean
* for github and apple always return generic
* pairing notification
* update copy and remove duplicates
* don't write too often
* remove
* make sure it doesn't show up on 3X
* reorg
* remove redundancies
* system: add chestnut offroad alerts
* system: refine chestnut offroad alerts
* system: refine chestnut power alerts
* system: confirm chestnut power recovery from PCIe
* system: detect missing chestnut power from INA voltage
AngusBell97