* move to openpilot
* draft
* support internal urls
* not used
* update seg list
* regen segment list
* regen seg list
* fix
* check both rear wheels
* revert chganges
* bump panda
* bump padna
old-commit-hash: 3160493c85cb132abf5acb5e4e22fc4a7c108ef1
* controlsd: steer in old preEnable state
* bump panda
* bump panda
* Update ref_commit
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 6698cd48294e94fdb4e09e8943e6505efa29c5d5
* add delay to GM camera ACC cancel to avoid FCW and cruise fault
* we can revert brake pressed threshold now
* bump panda
* add proper threshold
* bump
* bujmp panda
old-commit-hash: 6efd2c3de3d5b2955f3e7ab5c93701e94ac25537
* Hyundai: common CAN-FD brake pressed signal
* new name
* bump panda
* bump opendbc to master
* bump opendbc
* bump panda
* bump panda
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: c35e2b8e305b2648ce392ffdefd5d90b39ce353e
* add all signals
* try to forward this PSCMStatus
* fixes
* see if this works
* modify checksum when bit flipped
* bump opendbc
* so i can test without restarting
* bump
* bump panda
* clean up
* comment
* also fix this
* bump
* bump
* every 5 seconds
* only send our values
* fix
* try sending everything again (+1 counter)
* revert
* revert, forward msg
* forward
* fix that
* bump panda
* bump panda
* fine to not copy
* after cancel, pass bus
* fix
* Revert "fine to not copy"
This reverts commit 654ac1a7dad4f7b9b0a3de52768522fb60cc55bd.
old-commit-hash: 63d552cafc6e4728cfe097e7a3f8e3f5cd98a566
* gm: match panda standstill check
* fix
* needs to be <= 10 to avoid a fault, fix for safety tests
* fix
* fix
* bump panda to master
old-commit-hash: 826d8a8ae34bfd909535f5edff2229b8b2daf1a6
* bump panda
* bump panda
* for CAN-FD too
* clean up
* bump
* adjust safety
* fix lat active
* bump panda to master
* same limits
* rm line
* bump panda to master
old-commit-hash: 60fc7274eb631559f772ea0969e0ec28026e1426
* Hyundai: share panda flags with CAN-FD platform
* move that
* only set bit
* bump panda
* panda master
* regen + update refs for new param
old-commit-hash: c782380fc1cfcbc7b521f14db37a360aef6b53ec
* avoid 90 degree fault
* use 50 frames
* no panda mods
* clean up
* absolutely no faults. zero. zilch. nada
* fix initial value and comments
* try glitching at double rate instead of two in a row
* bump panda
* cut for two frames
* clean up
* bump panda
* clean up
* not today!
* bump panda to master
* prefix and simple lat_active
* prefix
old-commit-hash: f74fefaffad87471ba1d7fa351d7fd37b9505d4a
* This brake position value disengages stock ACC, use it to avoid controls mismatch. 2016-2017 Volt will hit this threshold and disengage, must install new design of brake pedal retaining clip, TSB 16-NA-147.
* 80 hz
* comment
* bump panda
* update refs
* bump panda
* bump panda
* bump panda
* bump panda to master
Co-authored-by: qadmus <42746943+qadmus@users.noreply.github.com>
old-commit-hash: 6ce511cc605782c25d45c66b55f859caaf7ce516
* stash
* process all functional addrs (stash)
* clean up
* rm
* simplify
* let user pass in tx for rx addrs
* revert panda
* simplify
* comment
order
* need to go by rx_addr now
* Revert "need to go by rx_addr now"
This reverts commit 1197ecfbc5b9e5df20b523a0623f644cd8cae1ef.
* stash
* should also work
* this seems pretty clean
* not used
* properly use
* comment
* some fixes
* some fixes
* send consecutive frames on physical addrs
* bump panda
* looks better
* setup_only
* Revert VIN changes
* rev
* bump panda to master
* Update selfdrive/car/isotp_parallel_query.py
old-commit-hash: bea960675f2ae7d2d9e3c95d8c79fde6b61d93d0
* raise timeouts
* extend timeout for each message/frame (not multi-frame full response)
* bump panda
* 100 ms timeout between frames (max I've seen is 20, should be good)
* bump panda
* remove unused
* Add tester present to HKG queries (temp)
* send tester present to all ecus first
* vin and fw_versions.py sleep, should figure out why sendcan drops packets
* None is wildcard (some ecus respond with negative code, that's fine)
* typing
* try bus 0
* revert brand-specific changes
* Update selfdrive/car/isotp_parallel_query.py
old-commit-hash: 870c5f383d2feb1b5dd255fd0c528d1427f8478c
* Add missing fw versions for 2019 Optima
* move versions to new platform
* add temp fw version notes
temp notes
* clean up
* Update docs
* add fw versions from the last 180 days
* add tests
* fix
* remove FPv1 for Optima
* seems like the 2016 is the same
* revert
* add versions from our 2019 Optima
* label/move some versions
* add some versions from a 2020! (3d96bd05b5513638)
* this is from the same 2017 as earlier
(4f930156368f7830)
* vin lookup isn't perfect
* Revert "vin lookup isn't perfect"
This reverts commit 62c563bc4549b37160254d45bb90fcbc1f6cd589.
* a 2020 (df71aec6e636d7e4)
* cleanup, this transmission is also a 2020 version
df71aec6e636d7e4|2021-10-07--17-59-28
* this comes with scc
* one line
* revert
* bump panda
* add our transmission FW
* Add test route
old-commit-hash: 2c9f751616d01a695968150c0edccc57cc2f6d4f
* Change ramp limits to 2/2 for CANFD cars
* Only the high torque CANFD cars
* comment
* Update selfdrive/car/hyundai/values.py
* Better to do 2/3 and for all cars
* bump to master
* update refs
old-commit-hash: d57e07eec0c3848755e856ea8a2cf14559fcc895
* subaru: match panda standstill
* subaru: match panda standstill
* actually test standstill
* bump panda to master
old-commit-hash: 86062fee6bbe5c38be77f8f995e9dd19dc2f2f54
* Consider regen properly in test_models
* bump panda
* bump panda
* can use the more interesting segment now
* rm
old-commit-hash: 4d351427c5a46dab100078b7e9d0737bce046e40
* add model years
* update Focus steer ratio
* Ford: add EU label to Focus Mk4
* add packages
* add Ford Explorer 2020
Package: Co-Pilot 360 Assist+
Optional on XLT
Standard on Limited, Limited Hybrid, ST and Platinum
https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf
* Ford: steering control with path angle
* Ford: add TJA toggle to buttons
* add Ford Explorer 2021
`62241b0c7fea4589|2022-08-30--11-58-24--0`
Package: Co-Pilot 360 Assist+
Optional on XLT
Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020)
https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf
* Ford: add shiftByWire ECU fw
* angle/steer refactor
* try always stop and go for US models
* no dashcam
* car info
* send resume button
* skip explorer
* escape and focus back in dashcam
* passthru buttons
* fordcan set bus for button message
* toggle off stock traffic jam assist so camera does not enforce driver presence checks
* not used
* update ramp rate/precision notes
* cleanup
* bump steering pressed torque to 0.8 Nm
* add standstill
* bump steer ratio
* try increasing delay?
* fix docs
* add kuga car info
* maybe fix tja toggle?
* compensate for ford roll compensation??
* oops
* better ui
* block non-adaptive
* add note on ui warning for hands on wheel
* try only checking/toggling TJA every 2 seconds
* add car test route
* dashcam only again
* send buttons to camera
* add process replay segment
* cleanup
* bump panda
* add extra FW
Co-authored-by: Cameron Clough <cameronjclough@gmail.com>
old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
* try a method to kill those faults
* cut torque for 1 frame
* sign doesn't seem to matter
* clean up
* better name
* Toyota allows you to keep your apply_steer, better control
* the logic was wrong entire time?
* cut steer for two frames
* Revert "cut steer for two frames"
This reverts commit 13a68ecc568fe1c0cd1f6f0b5f7ff6560efaf9e0.
* better variable names and comments
better variable names and comments
* should be good
* add safety
* actual number of frames
* constant
* bump panda
* bump panda
* bump panda
* bump panda
* bump panda
* bump panda
* bump panda
* fix to use min valid frames
* rm line
* simplify check
* bump panda
* bump panda to master
old-commit-hash: 50d117ed9a0c75a7374e76ec6e42d1a603bb11b0
* first pass at usb power mode cleanup
* fix build
* a sneaky one
* little more
* fix build
* bump pnada
* remove that
* power monitoring cleanup
* fix tests
* bump submodules
old-commit-hash: 28cb1897cb8be80b35b1ce7573066fb36b01d2d7
* Same standstill check as panda
* test honda in the same place
* bump panda
* bump panda
* bump panda
* bump to master
* bump panda
old-commit-hash: b34fe711b05d444300a9b8ed9cbb70ee35932699
* Hyundai: Car Port for Tucson Hybrid 2022
* Update RELEASES.md
* Init gear_msg at the top
* FW versions from script
* Button send attempt
* start with some cleanup
* Send button fixed bits
* Define all bytes and only send PAUSE/RESUME
* Use CRUISE_INFO to cancel cruise and resume
* 8-bit counter
* Cleanup ish
* 8 bit counter
* Send at 20ms
* Disengage bits
* Revert bump submodules
* Allow tx on 0x1a0
* Fix byte counts
* Send LFA and HDA icons based on engageability
* Send cruise buttons only on HDA2 cars for now
* Add comments
* Add FLAG_HYUNDAI_CANFD_HDA2 flag
* Update interface.py
* Update carstate.py
* Update carstate.py
* Update carstate.py
* Bump submodules
* Bump panda
* Bump opendbc
* Allow tx with CRUISE_INACTIVE
* GEAR has 24 bytes only
* Generate car docs
* Fix CRUISE_INFO copy
* Remove unused class
* Add CAN-FD busses to unit test
* Bump opendbc
* Revert "Add CAN-FD busses to unit test"
This reverts commit 2f751640408a7f73a9100947cbd95ea13fbb8a48.
* Remove duplicate
* New tune based on data
* Panda safety cleanup
* Include bus 0 in rx checks
* Missed one
* bus 6 check
* Remove redundant check
* Add comments
* Bump opendbc
* Sync with DBC
* Hide LFA icon when disengaged
* Little endian
* fix comment
* more conditions in carcontroller
* update pedal signal
* update tuning
* cleanup carcontroller
* bump panda
* fix mismatch
* alt buttons
* little more cleanup
* update refs for EV6 new safety param
* bump panda
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: bd5e28909f4576699717f8a2f6751f0d9fdfecc0
* VW PQ: Volkswagen Passat NMS
* regen CARS.md
* vEgo from Bremse_1 vehicle speed
* sync opendbc to master
* handle checksums and counters in opendbc
* LDW HUD message handling
* GRA_Neu_Zaehler -> COUNTER
* bump opendbc
* stub in till we find platform ACC standstill
* bump opendbc
* bump opendbc
* placeholder lateral accel data
* regen CARS.md
* counters now directly supported in opendbc
* additional door-open signals
* add trunk lid state
* add doors and trunk lid to signals list
* LDW_Status updates and passthrough
* bump opendbc for typo fix
* update AWV comment
* another comment update
* regen CARS.md with PQ in dashcam only
* don't show NMS footnotes while still in dashcam
* polish
* add stubbed-out dashcamOnly prep
* VW MQB: Cleanup stock ACC button handling
* bump opendbc and panda
* use controls resume output as trigger
* these can wait until taco bell
* bump opendbc
* pass through of previously fixed value
* retry CI
* checks already done in carcontroller
* don't need these anymore
* reduce diff for now
* slightly better abstraction
* more engine and trans FW
* turn signal is instantaneous stalk position
* weak sauce :(
* better clarity
* try torque tune
* add test route references
* bump opendbc and panda for OP long
* don't show steering faults for 3 seconds after start
* longitudinal control senders
* a little more torque
* test hax to torque control
* test a little more delay
* allow use of manufacturer ramp-up rate
* soften wheel-touch threshold
* Revert "test hax to torque control"
This reverts commit d1af459c29e36264aae406f72b8fcbc9ef22b9e0.
* punch it Chewie
* better ACC state and mainswitch handling
* a little more
* tweak max accel gradient
* oops
* also oops
* stuff
* srsly
* that's not how this works
* regen CARS.md
* footnotes now properly excluded for dashcam cars
* this wasn't a problem
* update network location detection
* bump submodules for ACC main switch
* clean up DBC references and long flag
* bump one more time
* one more time
* follow CANPacker counter refactor
* bump opendbc
* sync opendbc to master
* bump panda to fix Subaru tests
* DBC handling cleanup
* fix
* model-year stretch
* cleanup and rate bugfixes
* better abstractions
* simplify create_lka_hud_control
* volkswagencan -> mqbcan
* bump panda
* fix doc data bug, regen CARS.md
* style updates; diff reduction
* use common button enable logic
* not needed anymore
* refactor TSK and HUD enum values
* make common button events function
* consistency
* bump panda
* bump panda
* dashcam only
* don't need process_replay yet
* regen CARS.md with Passat NMS in dashcam
* can't handle dashcam-orphaned footnotes yet
* remove outdated standstill handling
* editor tried to be too helpful at some point
* don't need to import this anymore
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* follow parkingBrake refactor
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: c27d7913f2db43ec668dd068199bc568802dd809
* Switch to ECMPRDNL2 for GM gear
* Removing manumatic gear #
* values.py almost complete
* Silverado and Bolt EUV val and CP
* GM controller updated
* Cam hrns supp done (in theory)
* cleanup for new cars
* Remove extra constant
* WS, etc cleanup
* removing the unused
* Fix kpBP typo
* Updated docs
* Skip's PIF tune
* Dropped LKA CAN error patch
* Add silverado sigmoid ff
* CAN Err & LKA latch patch
* Remove EPS fault fix (another PR)
* Remove Silverado (another PR)
* clean up some common params
* Remove Escalade FP
Remove Escalade FP
* comment
* Premier is just a trim
Premier is just a trim
Premier is just a trim
* no footnote: new Bolt is like most other cars, older GM were outliers not at the camera
* clean up
clean up
* bump panda
* bump panda
* bump panda
* bump panda
* bump panda
* remove comments
* try spamming buttons on bus 2
* bump panda
* bumping opendbc w btn rc
* not needed for this port
This reverts commit 6af1f0ba799e075f877d7acc8ca0f117d97da361.
* add button safety
* Send next rc when spamming btns
* forward other signals in message
* missing DriveModeButton
* fill cruiseState.speed
* see if resume works without counter
* try the whole message
* send immediately and at 10Hz
* no resume, back to just button signal
* even holding random buttons it cancels
* Use torque controller with base tune
* stock long GM don't auto-resume yet
* Testing GM zero min steer speed
* Revert latcontrol
* revert opendbc
* latActive is basically lkas_enabled
* Update Bolt torque params
* comment
* clean up
* Add to releases
* Add test route
* Don't specify segment
* bump panda
* bump panda
* no harness for Bolt just yet
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* We support all and 2023
* move safetyParam up to first cam check
* Bump panda and update docs
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 4ffe9e68db8d752d9da45febccfe4c28a6e8a0f9
* Hyundai: rename HDA2 platform to CANFD
* bump panda
* bump panda
* cleanup panda safety config
old-commit-hash: 5f35c669a686f12f5079abc6d69b17fe2e65de94
* Rebase and merge upstream
* Bump panda
* bump panda
* todo comments, minor clean up
* Add test route
* send CLU11 on bus 2
* Update docs
* Use Chrysler cp ternary naming convention
* Add FW version
* Update with latest test route
* Use segment with engaging/disengaging and moving
* sort FW
* push ci route
* add comment
* bump panda
* bump panda
* clean up
* Limit torque
* bump panda
* bump panda
* bump panda
* Add missing FW
* Add CAN fingerprint (need to fix spotty queries)
* missing fingerprints
* bump panda
* use O
* It's 2022, how is SCC still not standard!
* space
* bump panda to master
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 1ab63cc8d812697aa1ffeec15f8adb4660512165
Shane Smiskol