diff --git a/selfdrive/ui/translations/main_ar.ts b/selfdrive/ui/translations/main_ar.ts index ef7110e72e..4048daf74a 100644 --- a/selfdrive/ui/translations/main_ar.ts +++ b/selfdrive/ui/translations/main_ar.ts @@ -133,14 +133,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - - - - Overrides the brightness of the device. - - Auto (Dark) @@ -149,6 +141,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -250,6 +250,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -464,15 +472,6 @@ Steering lag calibration is complete. Wake-Up Behavior - - Interactivity Timeout - - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - - Reboot إعادة التشغيل @@ -517,10 +516,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad - - Always Offroad - - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. @@ -533,6 +528,34 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + + DriveStats @@ -594,6 +617,61 @@ This is the time after which settings UI closes automatically if user is not int تشغيل وضع الراحة + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + التحقق + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -649,6 +727,63 @@ Firehose Mode allows you to maximize your training data uploads to improve openp MAX + + HudRendererSP + + km/h + كم/س + + + mph + ميل/س + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + + + + mi + + + + ft + + + + AHEAD + + + + MAX + MAX + + HyundaiSettings @@ -767,6 +902,18 @@ Firehose Mode allows you to maximize your training data uploads to improve openp This platform supports limited MADS settings. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -790,6 +937,34 @@ Firehose Mode allows you to maximize your training data uploads to improve openp Start the vehicle to check vehicle compatibility. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1048,6 +1223,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1169,10 +1356,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. يتم تنزيل تحديث لنظام تشغيل جهازك في الخلفية. سيطلَب منك التحديث عندما يصبح جاهزاً للتثبيت. - - NVMe drive not mounted. - محرك NVMe غير مثبَّت. - Device failed to register with the comma.ai backend. It will not connect or upload to comma.ai servers, and receives no support from comma.ai. If this is a device purchased at comma.ai/shop, open a ticket at https://comma.ai/support. @@ -1211,6 +1394,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1597,6 +1784,59 @@ Warning: You are on a metered connection! sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1691,6 +1931,10 @@ Warning: You are on a metered connection! Developer المطور + + Display + + SetupWidget @@ -1927,6 +2171,84 @@ Warning: You are on a metered connection! + + SpeedLimitPolicy + + Back + السابق + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + السابق + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2309,6 +2631,60 @@ Warning: You are on a metered connection! + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2319,6 +2695,10 @@ Warning: You are on a metered connection! Cancel إلغاء + + Favorites + + VisualsPanel @@ -2362,6 +2742,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget diff --git a/selfdrive/ui/translations/main_de.ts b/selfdrive/ui/translations/main_de.ts index dde9241460..3d90dca182 100644 --- a/selfdrive/ui/translations/main_de.ts +++ b/selfdrive/ui/translations/main_de.ts @@ -133,14 +133,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - - - - Overrides the brightness of the device. - - Auto (Dark) @@ -149,6 +141,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -250,6 +250,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -464,15 +472,6 @@ Steering lag calibration is complete. Wake-Up Behavior - - Interactivity Timeout - - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - - Reboot Neustart @@ -517,10 +516,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad - - Always Offroad - - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. @@ -533,6 +528,34 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + + DriveStats @@ -594,6 +617,61 @@ This is the time after which settings UI closes automatically if user is not int ENTSPANNTER MODUS AN + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + ÜBERPRÜFEN + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -645,6 +723,63 @@ Firehose Mode allows you to maximize your training data uploads to improve openp MAX + + HudRendererSP + + km/h + km/h + + + mph + mph + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + + + + mi + + + + ft + + + + AHEAD + + + + MAX + MAX + + HyundaiSettings @@ -759,6 +894,18 @@ Firehose Mode allows you to maximize your training data uploads to improve openp This platform supports limited MADS settings. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -782,6 +929,34 @@ Firehose Mode allows you to maximize your training data uploads to improve openp Start the vehicle to check vehicle compatibility. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1040,6 +1215,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1157,10 +1344,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. Ein Update für das Betriebssystem deines Geräts wird im Hintergrund heruntergeladen. Du wirst aufgefordert, das Update zu installieren, sobald es bereit ist. - - NVMe drive not mounted. - NVMe-Laufwerk nicht gemounted. - Device temperature too high. System cooling down before starting. Current internal component temperature: %1 Gerätetemperatur zu hoch. Das System kühlt ab, bevor es startet. Aktuelle interne Komponententemperatur: %1 @@ -1203,6 +1386,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1577,6 +1764,59 @@ Warning: You are on a metered connection! sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1671,6 +1911,10 @@ Warning: You are on a metered connection! Developer Entwickler + + Display + + SetupWidget @@ -1909,6 +2153,84 @@ Warning: You are on a metered connection! + + SpeedLimitPolicy + + Back + Zurück + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + Zurück + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2291,6 +2613,60 @@ Warning: You are on a metered connection! + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2301,6 +2677,10 @@ Warning: You are on a metered connection! Cancel Abbrechen + + Favorites + + VisualsPanel @@ -2344,6 +2724,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget diff --git a/selfdrive/ui/translations/main_es.ts b/selfdrive/ui/translations/main_es.ts index 3b53e7f944..284f63ebf3 100644 --- a/selfdrive/ui/translations/main_es.ts +++ b/selfdrive/ui/translations/main_es.ts @@ -133,14 +133,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - - - - Overrides the brightness of the device. - - Auto (Dark) @@ -149,6 +141,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -250,6 +250,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -468,15 +476,6 @@ La calibración del retraso de la dirección está completa. Wake-Up Behavior - - Interactivity Timeout - - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - - Reboot Reiniciar @@ -521,10 +520,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad - - Always Offroad - - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. @@ -537,6 +532,34 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + + DriveStats @@ -598,6 +621,61 @@ This is the time after which settings UI closes automatically if user is not int MODO CHILL + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + VERIFICAR + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -649,6 +727,63 @@ Firehose Mode allows you to maximize your training data uploads to improve openp MAX + + HudRendererSP + + km/h + km/h + + + mph + mph + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + + + + mi + + + + ft + + + + AHEAD + + + + MAX + MAX + + HyundaiSettings @@ -763,6 +898,18 @@ Firehose Mode allows you to maximize your training data uploads to improve openp This platform supports limited MADS settings. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -786,6 +933,34 @@ Firehose Mode allows you to maximize your training data uploads to improve openp Start the vehicle to check vehicle compatibility. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1044,6 +1219,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1165,10 +1352,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. Se está descargando una actualización del sistema operativo de su dispositivo en segundo plano. Se le pedirá que actualice cuando esté listo para instalarse. - - NVMe drive not mounted. - Unidad NVMe no montada. - Device failed to register with the comma.ai backend. It will not connect or upload to comma.ai servers, and receives no support from comma.ai. If this is a device purchased at comma.ai/shop, open a ticket at https://comma.ai/support. @@ -1207,6 +1390,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1581,6 +1768,59 @@ Warning: You are on a metered connection! sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1675,6 +1915,10 @@ Warning: You are on a metered connection! Developer Desarrollador + + Display + + SetupWidget @@ -1911,6 +2155,84 @@ Warning: You are on a metered connection! + + SpeedLimitPolicy + + Back + + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2293,6 +2615,60 @@ Warning: You are on a metered connection! + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2303,6 +2679,10 @@ Warning: You are on a metered connection! Cancel Cancelar + + Favorites + + VisualsPanel @@ -2346,6 +2726,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget diff --git a/selfdrive/ui/translations/main_fr.ts b/selfdrive/ui/translations/main_fr.ts index 45705defd9..c6c998b723 100644 --- a/selfdrive/ui/translations/main_fr.ts +++ b/selfdrive/ui/translations/main_fr.ts @@ -133,14 +133,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - - - - Overrides the brightness of the device. - - Auto (Dark) @@ -149,6 +141,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -250,6 +250,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -464,15 +472,6 @@ Steering lag calibration is complete. Wake-Up Behavior - - Interactivity Timeout - - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - - Reboot Redémarrer @@ -517,10 +516,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad - - Always Offroad - - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. @@ -533,6 +528,34 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + + DriveStats @@ -594,6 +617,61 @@ This is the time after which settings UI closes automatically if user is not int MODE DÉTENTE ACTIVÉ + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + VÉRIFIER + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -645,6 +723,63 @@ Firehose Mode allows you to maximize your training data uploads to improve openp MAX + + HudRendererSP + + km/h + km/h + + + mph + mi/h + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + + + + mi + + + + ft + + + + AHEAD + + + + MAX + MAX + + HyundaiSettings @@ -759,6 +894,18 @@ Firehose Mode allows you to maximize your training data uploads to improve openp This platform supports limited MADS settings. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -782,6 +929,34 @@ Firehose Mode allows you to maximize your training data uploads to improve openp Start the vehicle to check vehicle compatibility. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1040,6 +1215,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1161,10 +1348,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. Une mise à jour du système d'exploitation de votre appareil est en cours de téléchargement en arrière-plan. Vous serez invité à effectuer la mise à jour lorsqu'elle sera prête à être installée. - - NVMe drive not mounted. - Le disque NVMe n'est pas monté. - Device failed to register with the comma.ai backend. It will not connect or upload to comma.ai servers, and receives no support from comma.ai. If this is a device purchased at comma.ai/shop, open a ticket at https://comma.ai/support. @@ -1203,6 +1386,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1577,6 +1764,59 @@ Warning: You are on a metered connection! sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1671,6 +1911,10 @@ Warning: You are on a metered connection! Developer Dév. + + Display + + SetupWidget @@ -1907,6 +2151,84 @@ Warning: You are on a metered connection! + + SpeedLimitPolicy + + Back + Retour + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + Retour + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2289,6 +2611,60 @@ Warning: You are on a metered connection! + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2299,6 +2675,10 @@ Warning: You are on a metered connection! Cancel Annuler + + Favorites + + VisualsPanel @@ -2342,6 +2722,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget diff --git a/selfdrive/ui/translations/main_ja.ts b/selfdrive/ui/translations/main_ja.ts index 3faa183954..b6a29a867c 100644 --- a/selfdrive/ui/translations/main_ja.ts +++ b/selfdrive/ui/translations/main_ja.ts @@ -133,14 +133,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - - - - Overrides the brightness of the device. - - Auto (Dark) @@ -149,6 +141,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -250,6 +250,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -468,15 +476,6 @@ Steering lag calibration is complete. Wake-Up Behavior - - Interactivity Timeout - - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - - Reboot 再起動 @@ -521,10 +520,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad - - Always Offroad - - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. @@ -537,6 +532,34 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + + DriveStats @@ -598,6 +621,61 @@ This is the time after which settings UI closes automatically if user is not int CHILLモード + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + 確認 + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -648,6 +726,63 @@ Firehose Mode allows you to maximize your training data uploads to improve openp 最大速度 + + HudRendererSP + + km/h + km/h + + + mph + mph + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + + + + mi + + + + ft + + + + AHEAD + + + + MAX + 最大速度 + + HyundaiSettings @@ -761,6 +896,18 @@ Firehose Mode allows you to maximize your training data uploads to improve openp This platform supports limited MADS settings. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -784,6 +931,34 @@ Firehose Mode allows you to maximize your training data uploads to improve openp Start the vehicle to check vehicle compatibility. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1042,6 +1217,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1159,10 +1346,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. オペレーティングシステムがバックグラウンドでダウンロードされています。インストールの準備が整うと更新を促されます。 - - NVMe drive not mounted. - SSDドライブ(NVMe)がマウントされていません。 - Device temperature too high. System cooling down before starting. Current internal component temperature: %1 デバイスの温度が高すぎるためシステム起動前の冷却中です。現在のデバイス内部温度: %1 @@ -1205,6 +1388,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1576,6 +1763,59 @@ Warning: You are on a metered connection! sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1670,6 +1910,10 @@ Warning: You are on a metered connection! Developer 開発 + + Display + + SetupWidget @@ -1906,6 +2150,84 @@ Warning: You are on a metered connection! + + SpeedLimitPolicy + + Back + 戻る + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + 戻る + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2288,6 +2610,60 @@ Warning: You are on a metered connection! + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2298,6 +2674,10 @@ Warning: You are on a metered connection! Cancel キャンセル + + Favorites + + VisualsPanel @@ -2341,6 +2721,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget diff --git a/selfdrive/ui/translations/main_ko.ts b/selfdrive/ui/translations/main_ko.ts index 756cad6045..f3ec6b69e8 100644 --- a/selfdrive/ui/translations/main_ko.ts +++ b/selfdrive/ui/translations/main_ko.ts @@ -134,14 +134,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - 밝기 - - - Overrides the brightness of the device. - 기기 밝기를 직접 설정합니다. - Auto (Dark) 자동 (어둡게) @@ -150,6 +142,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto 자동 + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -254,6 +254,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. 빠른 부팅 모드는 업데이트가 비활성화되어 있어야 합니다.<br>먼저 소프트웨어 패널에서 '업데이트 비활성화'를 활성화하세요. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -472,16 +480,6 @@ Steering lag calibration is complete. Wake-Up Behavior 깨우기 동작 - - Interactivity Timeout - 상호작용 타임아웃 - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - 설정 화면에 사용자 지정 타임아웃을 적용하세요. -사용자가 화면과 상호작용하지 않으면 설정 화면이 자동으로 닫히는 시간입니다. - Reboot 재부팅 @@ -526,10 +524,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad 항상 오프로드 종료 - - Always Offroad - 항상 오프로드 - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. ⁍ 기본값: 기기가 정상적으로 부팅/절전 모드에서 해제되며, 작동 준비가 완료됩니다. @@ -542,6 +536,35 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. 부팅/절전 모드 후 기기의 상태를 제어합니다. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + 상호작용 타임아웃 + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + 설정 화면에 사용자 지정 타임아웃을 적용하세요. +사용자가 화면과 상호작용하지 않으면 설정 화면이 자동으로 닫히는 시간입니다. + DriveStats @@ -603,6 +626,61 @@ This is the time after which settings UI closes automatically if user is not int 안정 모드 켜짐 + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + 확인 + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -655,6 +733,63 @@ Firehose 모드를 사용하면 훈련 데이터 업로드를 극대화하여 op 최대 + + HudRendererSP + + km/h + km/h + + + mph + mph + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + 분 + + + mi + + + + ft + + + + AHEAD + + + + MAX + 최대 + + HyundaiSettings @@ -768,6 +903,18 @@ Firehose 모드를 사용하면 훈련 데이터 업로드를 극대화하여 op This platform supports limited MADS settings. 이 플랫폼은 제한된 MADS 설정을 지원합니다. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -791,6 +938,34 @@ Firehose 모드를 사용하면 훈련 데이터 업로드를 극대화하여 op Start the vehicle to check vehicle compatibility. 차량 호환성을 확인하려면 차량 시동을 걸어주세요. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1050,6 +1225,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1167,10 +1354,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. 기기 운영체제 업데이트가 백그라운드에서 다운로드 중입니다. 설치가 준비되면 업데이트를 진행하라는 메시지가 표시됩니다. - - NVMe drive not mounted. - NVMe 드라이브가 마운트되지 않았습니다. - Device temperature too high. System cooling down before starting. Current internal component temperature: %1 기기 온도가 너무 높습니다. 시스템이 시작하기 전에 온도를 낮추고 있습니다. 현재 내부 부품 온도는 %1입니다. @@ -1215,6 +1398,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1590,6 +1777,59 @@ Warning: You are on a metered connection! sunnypilot sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1684,6 +1924,10 @@ Warning: You are on a metered connection! Developer 개발자 + + Display + + SetupWidget @@ -1920,6 +2164,84 @@ Warning: You are on a metered connection! 이 설정들을 변경하려면 항상 오프로드 모드를 활성화하거나 차량 시동을 꺼야 합니다. + + SpeedLimitPolicy + + Back + 뒤로 + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + 뒤로 + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2302,6 +2624,60 @@ Warning: You are on a metered connection! 실험 모드를 활성화하려면 sunnypilot 가감속 제어(알파) 토글을 켜세요. + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2312,6 +2688,10 @@ Warning: You are on a metered connection! Cancel 취소 + + Favorites + + VisualsPanel @@ -2355,6 +2735,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). 앞차를 추적하는 역삼각형 아래에 유용한 측정 지표를 표시합니다. (openpilot 가감속 제어 기능이 있는 차량에만 해당됩니다) + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget diff --git a/selfdrive/ui/translations/main_pt-BR.ts b/selfdrive/ui/translations/main_pt-BR.ts index 0a886d435c..e820f472af 100644 --- a/selfdrive/ui/translations/main_pt-BR.ts +++ b/selfdrive/ui/translations/main_pt-BR.ts @@ -133,14 +133,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - - - - Overrides the brightness of the device. - - Auto (Dark) @@ -149,6 +141,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -250,6 +250,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -468,15 +476,6 @@ A calibração do atraso da direção foi concluída. Wake-Up Behavior - - Interactivity Timeout - - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - - Reboot Reiniciar @@ -521,10 +520,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad - - Always Offroad - - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. @@ -537,6 +532,34 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + + DriveStats @@ -598,6 +621,61 @@ This is the time after which settings UI closes automatically if user is not int MODO CHILL ON + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + VERIFICAR + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -649,6 +727,63 @@ Firehose Mode allows you to maximize your training data uploads to improve openp LIMITE + + HudRendererSP + + km/h + km/h + + + mph + mph + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + + + + mi + + + + ft + + + + AHEAD + + + + MAX + LIMITE + + HyundaiSettings @@ -763,6 +898,18 @@ Firehose Mode allows you to maximize your training data uploads to improve openp This platform supports limited MADS settings. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -786,6 +933,34 @@ Firehose Mode allows you to maximize your training data uploads to improve openp Start the vehicle to check vehicle compatibility. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1044,6 +1219,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1161,10 +1348,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. Uma atualização para o sistema operacional do seu dispositivo está sendo baixada em segundo plano. Você será solicitado a atualizar quando estiver pronto para instalar. - - NVMe drive not mounted. - Unidade NVMe não montada. - Device temperature too high. System cooling down before starting. Current internal component temperature: %1 Temperatura do dispositivo muito alta. O sistema está sendo resfriado antes de iniciar. A temperatura atual do componente interno é: %1 @@ -1207,6 +1390,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1581,6 +1768,59 @@ Warning: You are on a metered connection! sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1675,6 +1915,10 @@ Warning: You are on a metered connection! Developer Desenvdor + + Display + + SetupWidget @@ -1911,6 +2155,84 @@ Warning: You are on a metered connection! + + SpeedLimitPolicy + + Back + Voltar + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + Voltar + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2293,6 +2615,60 @@ Warning: You are on a metered connection! + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2303,6 +2679,10 @@ Warning: You are on a metered connection! Cancel Cancelar + + Favorites + + VisualsPanel @@ -2346,6 +2726,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget diff --git a/selfdrive/ui/translations/main_th.ts b/selfdrive/ui/translations/main_th.ts index 7b89f2a694..67a5a5eaeb 100644 --- a/selfdrive/ui/translations/main_th.ts +++ b/selfdrive/ui/translations/main_th.ts @@ -133,14 +133,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - - - - Overrides the brightness of the device. - - Auto (Dark) @@ -149,6 +141,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -250,6 +250,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -464,15 +472,6 @@ Steering lag calibration is complete. Wake-Up Behavior - - Interactivity Timeout - - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - - Reboot รีบูต @@ -517,10 +516,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad - - Always Offroad - - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. @@ -533,6 +528,34 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + + DriveStats @@ -594,6 +617,61 @@ This is the time after which settings UI closes automatically if user is not int คุณกำลังใช้โหมดชิล + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + ตรวจสอบ + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -644,6 +722,63 @@ Firehose Mode allows you to maximize your training data uploads to improve openp สูงสุด + + HudRendererSP + + km/h + กม./ชม. + + + mph + ไมล์/ชม. + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + + + + mi + + + + ft + + + + AHEAD + + + + MAX + สูงสุด + + HyundaiSettings @@ -757,6 +892,18 @@ Firehose Mode allows you to maximize your training data uploads to improve openp This platform supports limited MADS settings. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -780,6 +927,34 @@ Firehose Mode allows you to maximize your training data uploads to improve openp Start the vehicle to check vehicle compatibility. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1038,6 +1213,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1159,10 +1346,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. กำลังดาวน์โหลดอัปเดทสำหรับระบบปฏิบัติการอยู่เบื้องหลัง คุณจะได้รับการแจ้งเตือนเมื่อระบบพร้อมสำหรับการติดตั้ง - - NVMe drive not mounted. - ไม่ได้ติดตั้งไดร์ฟ NVMe - Device failed to register with the comma.ai backend. It will not connect or upload to comma.ai servers, and receives no support from comma.ai. If this is a device purchased at comma.ai/shop, open a ticket at https://comma.ai/support. @@ -1201,6 +1384,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1572,6 +1759,59 @@ Warning: You are on a metered connection! sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1666,6 +1906,10 @@ Warning: You are on a metered connection! Developer นักพัฒนา + + Display + + SetupWidget @@ -1902,6 +2146,84 @@ Warning: You are on a metered connection! + + SpeedLimitPolicy + + Back + ย้อนกลับ + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + ย้อนกลับ + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2284,6 +2606,60 @@ Warning: You are on a metered connection! + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2294,6 +2670,10 @@ Warning: You are on a metered connection! Cancel ยกเลิก + + Favorites + + VisualsPanel @@ -2337,6 +2717,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget diff --git a/selfdrive/ui/translations/main_tr.ts b/selfdrive/ui/translations/main_tr.ts index 0598d08364..923ab69139 100644 --- a/selfdrive/ui/translations/main_tr.ts +++ b/selfdrive/ui/translations/main_tr.ts @@ -133,14 +133,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - - - - Overrides the brightness of the device. - - Auto (Dark) @@ -149,6 +141,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -250,6 +250,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -464,15 +472,6 @@ Steering lag calibration is complete. Wake-Up Behavior - - Interactivity Timeout - - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - - Reboot Yeniden başlat @@ -517,10 +516,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad - - Always Offroad - - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. @@ -533,6 +528,34 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + + DriveStats @@ -594,6 +617,61 @@ This is the time after which settings UI closes automatically if user is not int + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + KONTROL ET + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -644,6 +722,63 @@ Firehose Mode allows you to maximize your training data uploads to improve openp MAX + + HudRendererSP + + km/h + km/h + + + mph + mph + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + + + + mi + + + + ft + + + + AHEAD + + + + MAX + MAX + + HyundaiSettings @@ -757,6 +892,18 @@ Firehose Mode allows you to maximize your training data uploads to improve openp This platform supports limited MADS settings. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -780,6 +927,34 @@ Firehose Mode allows you to maximize your training data uploads to improve openp Start the vehicle to check vehicle compatibility. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1038,6 +1213,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1158,10 +1345,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. - - NVMe drive not mounted. - - Device failed to register with the comma.ai backend. It will not connect or upload to comma.ai servers, and receives no support from comma.ai. If this is a device purchased at comma.ai/shop, open a ticket at https://comma.ai/support. @@ -1200,6 +1383,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1571,6 +1758,59 @@ Warning: You are on a metered connection! sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1665,6 +1905,10 @@ Warning: You are on a metered connection! Developer + + Display + + SetupWidget @@ -1901,6 +2145,84 @@ Warning: You are on a metered connection! + + SpeedLimitPolicy + + Back + + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2283,6 +2605,60 @@ Warning: You are on a metered connection! + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2293,6 +2669,10 @@ Warning: You are on a metered connection! Cancel + + Favorites + + VisualsPanel @@ -2336,6 +2716,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget diff --git a/selfdrive/ui/translations/main_zh-CHS.ts b/selfdrive/ui/translations/main_zh-CHS.ts index 1f4db2d6d0..3be9377503 100644 --- a/selfdrive/ui/translations/main_zh-CHS.ts +++ b/selfdrive/ui/translations/main_zh-CHS.ts @@ -133,14 +133,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - - - - Overrides the brightness of the device. - - Auto (Dark) @@ -149,6 +141,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -250,6 +250,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -468,15 +476,6 @@ Steering lag calibration is complete. Wake-Up Behavior - - Interactivity Timeout - - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - - Reboot 重启 @@ -521,10 +520,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad - - Always Offroad - - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. @@ -537,6 +532,34 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + + DriveStats @@ -598,6 +621,61 @@ This is the time after which settings UI closes automatically if user is not int 轻松模式运行 + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + 查看 + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -648,6 +726,63 @@ Firehose Mode allows you to maximize your training data uploads to improve openp 最高定速 + + HudRendererSP + + km/h + km/h + + + mph + mph + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + + + + mi + + + + ft + + + + AHEAD + + + + MAX + 最高定速 + + HyundaiSettings @@ -761,6 +896,18 @@ Firehose Mode allows you to maximize your training data uploads to improve openp This platform supports limited MADS settings. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -784,6 +931,34 @@ Firehose Mode allows you to maximize your training data uploads to improve openp Start the vehicle to check vehicle compatibility. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1042,6 +1217,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1159,10 +1346,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. 一个针对您设备的操作系统更新正在后台下载中。当更新准备好安装时，您将收到提示进行更新。 - - NVMe drive not mounted. - NVMe固态硬盘未被挂载。 - Device temperature too high. System cooling down before starting. Current internal component temperature: %1 设备温度过高。系统正在冷却中，等冷却完毕后才会启动。目前内部组件温度：%1 @@ -1205,6 +1388,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1576,6 +1763,59 @@ Warning: You are on a metered connection! sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1670,6 +1910,10 @@ Warning: You are on a metered connection! Developer 开发人员 + + Display + + SetupWidget @@ -1906,6 +2150,84 @@ Warning: You are on a metered connection! + + SpeedLimitPolicy + + Back + 返回 + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + 返回 + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2288,6 +2610,60 @@ Warning: You are on a metered connection! + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2298,6 +2674,10 @@ Warning: You are on a metered connection! Cancel 取消 + + Favorites + + VisualsPanel @@ -2341,6 +2721,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget diff --git a/selfdrive/ui/translations/main_zh-CHT.ts b/selfdrive/ui/translations/main_zh-CHT.ts index 1a8784846c..fac29bed62 100644 --- a/selfdrive/ui/translations/main_zh-CHT.ts +++ b/selfdrive/ui/translations/main_zh-CHT.ts @@ -133,14 +133,6 @@ Please use caution when using this feature. Only use the blinker when traffic an Brightness - - Brightness - - - - Overrides the brightness of the device. - - Auto (Dark) @@ -149,6 +141,14 @@ Please use caution when using this feature. Only use the blinker when traffic an Auto + + Global Brightness + + + + Overrides the brightness of the device. This applies to both onroad and offroad screens. + + ConfirmationDialog @@ -250,6 +250,14 @@ This only toggles the visibility of the controls; it does not toggle the actual Quickboot mode requires updates to be disabled.<br>Enable 'Disable Updates' in the Software panel first. + + Enable Copyparty service + + + + Copyparty is a very capable file server, you can use it to download your routes, view your logs and even make some edits on some files from your browser. Requires you to connect to your comma locally via it's IP. + + DevicePanel @@ -468,15 +476,6 @@ Steering lag calibration is complete. Wake-Up Behavior - - Interactivity Timeout - - - - Apply a custom timeout for settings UI. -This is the time after which settings UI closes automatically if user is not interacting with the screen. - - Reboot 重新啟動 @@ -521,10 +520,6 @@ This is the time after which settings UI closes automatically if user is not int Exit Always Offroad - - Always Offroad - - ⁍ Default: Device will boot/wake-up normally & will be ready to engage. @@ -537,6 +532,34 @@ This is the time after which settings UI closes automatically if user is not int Controls state of the device after boot/sleep. + + Onroad Uploads + + + + Enable Always Offroad + + + + + DisplayPanel + + Onroad Screen: Reduced Brightness + + + + Turn off device screen or reduce brightness after driving starts. It automatically brightens again when screen is touched or a visible alert is displayed. + + + + Interactivity Timeout + + + + Apply a custom timeout for settings UI. +This is the time after which settings UI closes automatically if user is not interacting with the screen. + + DriveStats @@ -598,6 +621,61 @@ This is the time after which settings UI closes automatically if user is not int 輕鬆模式 ON + + ExternalStorageControl + + External Storage + + + + Extend your comma device's storage by inserting a USB drive into the aux port. + + + + CHECK + 檢查 + + + MOUNT + + + + UNMOUNT + + + + FORMAT + + + + Are you sure you want to format this drive? This will erase all data. + + + + Format + + + + formatting + + + + insert drive + + + + needs format + + + + mounting + + + + unmounting + + + FirehosePanel @@ -648,6 +726,63 @@ Firehose Mode allows you to maximize your training data uploads to improve openp 最高 + + HudRendererSP + + km/h + km/h + + + mph + mph + + + GREEN +LIGHT + + + + LEAD VEHICLE +DEPARTING + + + + SPEED + + + + LIMIT + + + + Near + + + + km + + + + m + + + + mi + + + + ft + + + + AHEAD + + + + MAX + 最高 + + HyundaiSettings @@ -761,6 +896,18 @@ Firehose Mode allows you to maximize your training data uploads to improve openp This platform supports limited MADS settings. + + Enforce Torque Lateral Control + + + + Enable this to enforce sunnypilot to steer with Torque lateral control. + + + + Customize Params + + LongitudinalPanel @@ -784,6 +931,34 @@ Firehose Mode allows you to maximize your training data uploads to improve openp Start the vehicle to check vehicle compatibility. + + Intelligent Cruise Button Management (ICBM) (Alpha) + + + + When enabled, sunnypilot will attempt to manage the built-in cruise control buttons by emulating button presses for limited longitudinal control. + + + + Smart Cruise Control - Vision + + + + Use vision path predictions to estimate the appropriate speed to drive through turns ahead. + + + + Smart Cruise Control - Map + + + + Use map data to estimate the appropriate speed to drive through turns ahead. + + + + Speed Limit + + MadsSettings @@ -1042,6 +1217,18 @@ The default software delay value is 0.2 Total Delay: + + Use Lane Turn Desires + + + + Adjust Lane Turn Speed + + + + Set the maximum speed for lane turn desires. Default is 19 %1. + + MultiOptionDialog @@ -1159,10 +1346,6 @@ The default software delay value is 0.2 An update to your device's operating system is downloading in the background. You will be prompted to update when it's ready to install. 一個有關操作系統的更新正在後台下載中。當更新準備好安裝時，您將收到提示進行更新。 - - NVMe drive not mounted. - NVMe 固態硬碟未被掛載。 - Device temperature too high. System cooling down before starting. Current internal component temperature: %1 裝置溫度過高。系統正在冷卻中，等冷卻完畢後才會啟動。目前內部組件溫度：%1 @@ -1205,6 +1388,10 @@ The default software delay value is 0.2 %1 + + <b>Unsupported branch detected</b> - The current version of <b><u>%1</u></b> branch is no longer supported on the comma three. Please go to <b>[Device > Software]</b> and install a supported branch with <b><u>-tici</u></b> in the branch name for the comma three. + + OffroadHome @@ -1576,6 +1763,59 @@ Warning: You are on a metered connection! sunnypilot + + None + + + + Fixed + + + + Percent + + + + Car +Only + + + + Map +Only + + + + Car +First + + + + Map +First + + + + Combined +Data + + + + Off + + + + Information + + + + Warning + + + + Assist + + SettingsWindow @@ -1670,6 +1910,10 @@ Warning: You are on a metered connection! Developer 開發人員 + + Display + + SetupWidget @@ -1906,6 +2150,84 @@ Warning: You are on a metered connection! + + SpeedLimitPolicy + + Back + 回上頁 + + + Speed Limit Source + + + + ⦿ Car Only: Use Speed Limit data only from Car + + + + ⦿ Map Only: Use Speed Limit data only from OpenStreetMaps + + + + ⦿ Car First: Use Speed Limit data from Car if available, else use from OpenStreetMaps + + + + ⦿ Map First: Use Speed Limit data from OpenStreetMaps if available, else use from Car + + + + ⦿ Combined: Use combined Speed Limit data from Car & OpenStreetMaps + + + + + SpeedLimitSettings + + Back + 回上頁 + + + Speed Limit + + + + Customize Source + + + + Speed Limit Offset + + + + ⦿ None: No Offset + + + + ⦿ Fixed: Adds a fixed offset [Speed Limit + Offset] + + + + ⦿ Percent: Adds a percent offset [Speed Limit + (Offset % Speed Limit)] + + + + ⦿ Off: Disables the Speed Limit functions. + + + + ⦿ Information: Displays the current road's speed limit. + + + + ⦿ Warning: Provides a warning when exceeding the current road's speed limit. + + + + ⦿ Assist: Adjusts the vehicle's cruise speed based on the current road's speed limit when operating the +/- buttons. + + + SshControl @@ -2288,6 +2610,60 @@ Warning: You are on a metered connection! + + TorqueLateralControlCustomParams + + Manual Real-Time Tuning + + + + Enforces the torque lateral controller to use the fixed values instead of the learned values from Self-Tune. Enabling this toggle overrides Self-Tune values. + + + + Lateral Acceleration Factor + + + + Friction + + + + Real-time and Offline + + + + Offline Only + + + + + TorqueLateralControlSettings + + Self-Tune + + + + Enables self-tune for Torque lateral control for platforms that do not use Torque lateral control by default. + + + + Less Restrict Settings for Self-Tune (Beta) + + + + Less strict settings when using Self-Tune. This allows torqued to be more forgiving when learning values. + + + + Enable Custom Tuning + + + + Enables custom tuning for Torque lateral control. Modifying Lateral Acceleration Factor and Friction below will override the offline values indicated in the YAML files within "opendbc/car/torque_data". The values will also be used live when "Manual Real-Time Tuning" toggle is enabled. + + + TreeOptionDialog @@ -2298,6 +2674,10 @@ Warning: You are on a metered connection! Cancel 取消 + + Favorites + + VisualsPanel @@ -2341,6 +2721,91 @@ Warning: You are on a metered connection! Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control). + + Enable Tesla Rainbow Mode + + + + A beautiful rainbow effect on the path the model wants to take. + + + + It + + + + does not + + + + affect driving in any way. + + + + Enable Standstill Timer + + + + Show a timer on the HUD when the car is at a standstill. + + + + Display Road Name + + + + Displays the name of the road the car is traveling on. The OpenStreetMap database of the location must be downloaded from the OSM panel to fetch the road name. + + + + Green Traffic Light Alert (Beta) + + + + A chime and on-screen alert will play when the traffic light you are waiting for turns green and you have no vehicle in front of you. + + + + Note: This chime is only designed as a notification. It is the driver's responsibility to observe their environment and make decisions accordingly. + + + + Lead Departure Alert (Beta) + + + + A chime and on-screen alert will play when you are stopped, and the vehicle in front of you start moving. + + + + Speedometer: Always Display True Speed + + + + Always display the true vehicle current speed from wheel speed sensors. + + + + Speedometer: Hide from Onroad Screen + + + + Right + + + + Right && +Bottom + + + + Developer UI + + + + Display real-time parameters and metrics from various sources. + + WiFiPromptWidget