mirror of
https://github.com/dragonpilot/dragonpilot.git
synced 2026-08-22 16:53:49 +08:00
Adeeb Shihadeh
9241de2210
* add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com>
Port structure
interface.py
Generic interface to send and receive messages from CAN (controlsd uses this to communicate with car)
carcontroller.py
Builds CAN messages to send to car
carstate.py
Reads CAN from car and builds openpilot CarState message
values.py
Fingerprints and absolute limits
radar_interface.py
Radar interface