mirror of
https://github.com/commaai/agnos-kernel-sdm845.git
synced 2026-06-08 03:15:12 +08:00
master
10039 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Willem Melching
|
bc45c93cdb | perf build fixes | ||
|
Greg Kroah-Hartman
|
9c3041c524 |
Merge 4.9.102 into android-4.9
Changes in 4.9.102
usbip: usbip_host: refine probe and disconnect debug msgs to be useful
usbip: usbip_host: delete device from busid_table after rebind
usbip: usbip_host: run rebind from exit when module is removed
usbip: usbip_host: fix NULL-ptr deref and use-after-free errors
usbip: usbip_host: fix bad unlock balance during stub_probe()
ALSA: usb: mixer: volume quirk for CM102-A+/102S+
ALSA: hda: Add Lenovo C50 All in one to the power_save blacklist
ALSA: control: fix a redundant-copy issue
spi: pxa2xx: Allow 64-bit DMA
spi: bcm-qspi: Avoid setting MSPI_CDRAM_PCS for spi-nor master
spi: bcm-qspi: Always read and set BSPI_MAST_N_BOOT_CTRL
KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock
powerpc: Don't preempt_disable() in show_cpuinfo()
signals: avoid unnecessary taking of sighand->siglock
tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}
netfilter: nf_tables: can't fail after linking rule into active rule list
i2c: designware: fix poll-after-enable regression
powerpc/powernv: Fix NVRAM sleep in invalid context when crashing
mm: don't allow deferred pages with NEED_PER_CPU_KM
s390/qdio: fix access to uninitialized qdio_q fields
s390/cpum_sf: ensure sample frequency of perf event attributes is non-zero
s390/qdio: don't release memory in qdio_setup_irq()
s390: remove indirect branch from do_softirq_own_stack
x86/pkeys: Override pkey when moving away from PROT_EXEC
x86/pkeys: Do not special case protection key 0
efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' definition for mixed mode
ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr
tick/broadcast: Use for_each_cpu() specially on UP kernels
ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabed
ARM: 8770/1: kprobes: Prohibit probing on optimized_callback
ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions
Btrfs: fix xattr loss after power failure
btrfs: fix crash when trying to resume balance without the resume flag
x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under Xen
btrfs: fix reading stale metadata blocks after degraded raid1 mounts
x86/nospec: Simplify alternative_msr_write()
x86/bugs: Concentrate bug detection into a separate function
x86/bugs: Concentrate bug reporting into a separate function
x86/bugs: Read SPEC_CTRL MSR during boot and re-use reserved bits
x86/bugs, KVM: Support the combination of guest and host IBRS
x86/bugs: Expose /sys/../spec_store_bypass
x86/cpufeatures: Add X86_FEATURE_RDS
x86/bugs: Provide boot parameters for the spec_store_bypass_disable mitigation
x86/bugs/intel: Set proper CPU features and setup RDS
x86/bugs: Whitelist allowed SPEC_CTRL MSR values
x86/bugs/AMD: Add support to disable RDS on Fam[15,16,17]h if requested
x86/KVM/VMX: Expose SPEC_CTRL Bit(2) to the guest
x86/speculation: Create spec-ctrl.h to avoid include hell
prctl: Add speculation control prctls
x86/process: Optimize TIF checks in __switch_to_xtra()
x86/process: Correct and optimize TIF_BLOCKSTEP switch
x86/process: Optimize TIF_NOTSC switch
x86/process: Allow runtime control of Speculative Store Bypass
x86/speculation: Add prctl for Speculative Store Bypass mitigation
nospec: Allow getting/setting on non-current task
proc: Provide details on speculation flaw mitigations
seccomp: Enable speculation flaw mitigations
x86/bugs: Make boot modes __ro_after_init
prctl: Add force disable speculation
seccomp: Use PR_SPEC_FORCE_DISABLE
seccomp: Add filter flag to opt-out of SSB mitigation
seccomp: Move speculation migitation control to arch code
x86/speculation: Make "seccomp" the default mode for Speculative Store Bypass
x86/bugs: Rename _RDS to _SSBD
proc: Use underscores for SSBD in 'status'
Documentation/spec_ctrl: Do some minor cleanups
x86/bugs: Fix __ssb_select_mitigation() return type
x86/bugs: Make cpu_show_common() static
x86/bugs: Fix the parameters alignment and missing void
x86/cpu: Make alternative_msr_write work for 32-bit code
KVM: SVM: Move spec control call after restore of GS
x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS
x86/cpufeatures: Disentangle SSBD enumeration
x86/cpu/AMD: Fix erratum 1076 (CPB bit)
x86/cpufeatures: Add FEATURE_ZEN
x86/speculation: Handle HT correctly on AMD
x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
x86/speculation: Add virtualized speculative store bypass disable support
x86/speculation: Rework speculative_store_bypass_update()
x86/bugs: Unify x86_spec_ctrl_{set_guest,restore_host}
x86/bugs: Expose x86_spec_ctrl_base directly
x86/bugs: Remove x86_spec_ctrl_set()
x86/bugs: Rework spec_ctrl base and mask logic
x86/speculation, KVM: Implement support for VIRT_SPEC_CTRL/LS_CFG
KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
x86/bugs: Rename SSBD_NO to SSB_NO
Linux 4.9.102
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
||
|
Kees Cook
|
ab677c2add |
seccomp: Add filter flag to opt-out of SSB mitigation
commit 00a02d0c502a06d15e07b857f8ff921e3e402675 upstream If a seccomp user is not interested in Speculative Store Bypass mitigation by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when adding filters. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
c462abbf77 |
Merge 4.9.99 into android-4.9
Changes in 4.9.99 perf/core: Fix the perf_cpu_time_max_percent check percpu: include linux/sched.h for cond_resched() bpf: map_get_next_key to return first key on NULL arm/arm64: KVM: Add PSCI version selection API crypto: talitos - fix IPsec cipher in length serial: imx: ensure UCR3 and UFCR are setup correctly USB: serial: option: Add support for Quectel EP06 ALSA: pcm: Check PCM state at xfern compat ioctl ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger() ALSA: aloop: Mark paused device as inactive ALSA: aloop: Add missing cable lock to ctl API callbacks tracepoint: Do not warn on ENOMEM Input: leds - fix out of bound access Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro xfs: prevent creating negative-sized file via INSERT_RANGE RDMA/cxgb4: release hw resources on device removal RDMA/ucma: Allow resolving address w/o specifying source address RDMA/mlx5: Protect from shift operand overflow NET: usb: qmi_wwan: add support for ublox R410M PID 0x90b2 IB/mlx5: Use unlimited rate when static rate is not supported IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used drm/vmwgfx: Fix a buffer object leak drm/bridge: vga-dac: Fix edid memory leak test_firmware: fix setting old custom fw path back on exit, second try USB: serial: visor: handle potential invalid device configuration USB: Accept bulk endpoints with 1024-byte maxpacket USB: serial: option: reimplement interface masking USB: serial: option: adding support for ublox R410M usb: musb: host: fix potential NULL pointer dereference usb: musb: trace: fix NULL pointer dereference in musb_g_tx() platform/x86: asus-wireless: Fix NULL pointer dereference s390/facilites: use stfle_fac_list array size for MAX_FACILITY_BIT Linux 4.9.99 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> |
||
|
Ben Hutchings
|
b70f9d27ea |
test_firmware: fix setting old custom fw path back on exit, second try
commit e538409257d0217a9bc715686100a5328db75a15 upstream.
Commit 65c79230576 tried to clear the custom firmware path on exit by
writing a single space to the firmware_class.path parameter. This
doesn't work because nothing strips this space from the value stored
and fw_get_filesystem_firmware() only ignores zero-length paths.
Instead, write a null byte.
Fixes:
|
||
|
Greg Kroah-Hartman
|
f679e4d9b7 |
Merge 4.9.98 into android-4.9
Changes in 4.9.98
ext4: prevent right-shifting extents beyond EXT_MAX_BLOCKS
ext4: set h_journal if there is a failure starting a reserved handle
ext4: add validity checks for bitmap block numbers
ext4: fix bitmap position validation
random: set up the NUMA crng instances after the CRNG is fully initialized
random: fix possible sleeping allocation from irq context
random: rate limit unseeded randomness warnings
usbip: usbip_event: fix to not print kernel pointer address
usbip: usbip_host: fix to hold parent lock for device_attach() calls
usbip: vhci_hcd: Fix usb device and sockfd leaks
USB: serial: simple: add libtransistor console
USB: serial: ftdi_sio: use jtag quirk for Arrow USB Blaster
USB: serial: cp210x: add ID for NI USB serial console
usb: core: Add quirk for HP v222w 16GB Mini
USB: Increment wakeup count on remote wakeup.
ALSA: usb-audio: Skip broken EU on Dell dock USB-audio
virtio: add ability to iterate over vqs
virtio_console: free buffers after reset
drm/virtio: fix vq wait_event condition
tty: Don't call panic() at tty_ldisc_init()
tty: n_gsm: Fix long delays with control frame timeouts in ADM mode
tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set
tty: Use __GFP_NOFAIL for tty_ldisc_get()
ALSA: dice: fix OUI for TC group
ALSA: dice: fix error path to destroy initialized stream data
ALSA: opl3: Hardening for potential Spectre v1
ALSA: asihpi: Hardening for potential Spectre v1
ALSA: hdspm: Hardening for potential Spectre v1
ALSA: rme9652: Hardening for potential Spectre v1
ALSA: control: Hardening for potential Spectre v1
ALSA: core: Report audio_tstamp in snd_pcm_sync_ptr
ALSA: seq: oss: Fix unbalanced use lock for synth MIDI device
ALSA: seq: oss: Hardening for potential Spectre v1
ALSA: hda: Hardening for potential Spectre v1
ALSA: hda/realtek - Add some fixes for ALC233
mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block.
mtd: cfi: cmdset_0001: Workaround Micron Erase suspend bug.
mtd: cfi: cmdset_0002: Do not allow read/write to suspend erase block.
kobject: don't use WARN for registration failures
scsi: sd: Defer spinning up drive while SANITIZE is in progress
PCI: aardvark: Fix logic in advk_pcie_{rd,wr}_conf()
PCI: aardvark: Set PIO_ADDR_LS correctly in advk_pcie_rd_conf()
PCI: aardvark: Fix PCIe Max Read Request Size setting
ARM: amba: Make driver_override output consistent with other buses
ARM: amba: Fix race condition with driver_override
ARM: amba: Don't read past the end of sysfs "driver_override" buffer
crypto: drbg - set freed buffers to NULL
ASoC: fsl_esai: Fix divisor calculation failure at lower ratio
libceph: un-backoff on tick when we have a authenticated session
libceph: reschedule a tick in finish_hunting()
libceph: validate con->state at the top of try_write()
earlycon: Use a pointer table to fix __earlycon_table stride
cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt
rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops
drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shaders
objtool, perf: Fix GCC 8 -Wrestrict error
tools/lib/subcmd/pager.c: do not alias select() params
x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds
x86/smpboot: Don't use mwait_play_dead() on AMD systems
x86/microcode/intel: Save microcode patch unconditionally
powerpc/eeh: Fix race with driver un/bind
Linux 4.9.98
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
||
|
Sergey Senozhatsky
|
d8d8355841 |
tools/lib/subcmd/pager.c: do not alias select() params
commit ad343a98e74e85aa91d844310e797f96fee6983b upstream.
Use a separate fd set for select()-s exception fds param to fix the
following gcc warning:
pager.c:36:12: error: passing argument 2 to restrict-qualified parameter aliases with argument 4 [-Werror=restrict]
select(1, &in, NULL, &in, NULL);
^~~ ~~~
Link: http://lkml.kernel.org/r/20180101105626.7168-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Fredrik Schön <fredrikschon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Josh Poimboeuf
|
20d10d70f0 |
objtool, perf: Fix GCC 8 -Wrestrict error
commit 854e55ad289ef8888e7991f0ada85d5846f5afb9 upstream.
Starting with recent GCC 8 builds, objtool and perf fail to build with
the following error:
../str_error_r.c: In function ‘str_error_r’:
../str_error_r.c:25:3: error: passing argument 1 to restrict-qualified parameter aliases with argument 5 [-Werror=restrict]
snprintf(buf, buflen, "INTERNAL ERROR: strerror_r(%d, %p, %zd)=%d", errnum, buf, buflen, err);
The code seems harmless, but there's probably no benefit in printing the
'buf' pointer in this situation anyway, so just remove it to make GCC
happy.
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180316031154.juk2uncs7baffctp@treble
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Fredrik Schön <fredrikschon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Greg Kroah-Hartman
|
2bcbbd5b39 |
Merge 4.9.97 into android-4.9
Changes in 4.9.97
cifs: do not allow creating sockets except with SMB1 posix exensions
x86/tsc: Prevent 32bit truncation in calc_hpet_ref()
drm/vc4: Fix memory leak during BO teardown
drm/i915: Fix LSPCON TMDS output buffer enabling from low-power state
i2c: i801: store and restore the SLVCMD register at load and unload
i2c: i801: Save register SMBSLVCMD value only once
i2c: i801: Restore configuration at shutdown
usb: musb: fix enumeration after resume
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
usb: musb: Fix external abort in musb_remove on omap2430
MIPS: Generic: Fix big endian CPUs on generic machine
Input: drv260x - fix initializing overdrive voltage
power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference
stk-webcam: fix an endian bug in stk_camera_read_reg()
OF: Prevent unaligned access in of_alias_scan()
ath9k_hw: check if the chip failed to wake up
jbd2: fix use after free in kjournald2()
Revert "perf tools: Decompress kernel module when reading DSO data"
perf: Fix sample_max_stack maximum check
perf: Return proper values for user stack errors
RDMA/mlx5: Fix NULL dereference while accessing XRC_TGT QPs
drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing
mac80211_hwsim: fix use-after-free bug in hwsim_exit_net
r8152: add Linksys USB3GIGV1 id
Revert "pinctrl: intel: Initialize GPIO properly when used through irqchip"
Revert "ath10k: send (re)assoc peer command when NSS changed"
PCI: Wait up to 60 seconds for device to become ready after FLR
s390: introduce CPU alternatives
s390: enable CPU alternatives unconditionally
KVM: s390: wire up bpb feature
s390: scrub registers on kernel entry and KVM exit
s390: add optimized array_index_mask_nospec
s390/alternative: use a copy of the facility bit mask
s390: add options to change branch prediction behaviour for the kernel
s390: run user space and KVM guests with modified branch prediction
s390: introduce execute-trampolines for branches
KVM: s390: force bp isolation for VSIE
s390: Replace IS_ENABLED(EXPOLINE_*) with IS_ENABLED(CONFIG_EXPOLINE_*)
s390: do not bypass BPENTER for interrupt system calls
s390/entry.S: fix spurious zeroing of r0
s390: move nobp parameter functions to nospec-branch.c
s390: add automatic detection of the spectre defense
s390: report spectre mitigation via syslog
s390: add sysfs attributes for spectre
s390: correct nospec auto detection init order
s390: correct module section names for expoline code revert
bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave
KEYS: DNS: limit the length of option strings
l2tp: check sockaddr length in pppol2tp_connect()
net: validate attribute sizes in neigh_dump_table()
llc: delete timers synchronously in llc_sk_free()
tcp: don't read out-of-bounds opsize
team: avoid adding twice the same option to the event list
team: fix netconsole setup over team
packet: fix bitfield update race
tipc: add policy for TIPC_NLA_NET_ADDR
pppoe: check sockaddr length in pppoe_connect()
vlan: Fix reading memory beyond skb->tail in skb_vlan_tagged_multi
sctp: do not check port in sctp_inet6_cmp_addr
net: sched: ife: signal not finding metaid
llc: hold llc_sap before release_sock()
llc: fix NULL pointer deref for SOCK_ZAPPED
net: ethernet: ti: cpsw: fix tx vlan priority mapping
net: fix deadlock while clearing neighbor proxy table
tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets
net: af_packet: fix race in PACKET_{R|T}X_RING
ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy
strparser: Fix incorrect strp->need_bytes value.
scsi: mptsas: Disable WRITE SAME
cdrom: information leak in cdrom_ioctl_media_changed()
s390/cio: update chpid descriptor after resource accessibility event
s390/dasd: fix IO error for newly defined devices
s390/uprobes: implement arch_uretprobe_is_alive()
ACPI / video: Only default only_lcd to true on Win8-ready _desktops_
Linux 4.9.97
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
||
|
Greg Kroah-Hartman
|
fdc2090bda |
Revert "perf tools: Decompress kernel module when reading DSO data"
This reverts commit
|
||
|
Greg Hackmann
|
b4c14c25fd |
Merge tag 'v4.9.95' into android-4.9.95
This is the 4.9.95 stable release Change-Id: I7b8c0b5f4ea5afaddbf9b77813efe675332bced0 Signed-off-by: Greg Hackmann <ghackmann@google.com> |
||
|
Greg Kroah-Hartman
|
6ba906fca3 |
Revert "perf tests: Decompress kernel module before objdump"
This reverts commit
|
||
|
Adrian Hunter
|
57ce7d4b43 |
perf intel-pt: Fix timestamp following overflow
commit 91d29b288aed3406caf7c454bf2b898c96cfd177 upstream. timestamp_insn_cnt is used to estimate the timestamp based on the number of instructions since the last known timestamp. If the estimate is not accurate enough decoding might not be correctly synchronized with side-band events causing more trace errors. However there are always timestamps following an overflow, so the estimate is not needed and can indeed result in more errors. Suppress the estimate by setting timestamp_insn_cnt to zero. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1520431349-30689-5-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Adrian Hunter
|
2c1f44bdf8 |
perf intel-pt: Fix error recovery from missing TIP packet
commit 1c196a6c771c47a2faa63d38d913e03284f73a16 upstream. When a TIP packet is expected but there is a different packet, it is an error. However the unexpected packet might be something important like a TSC packet, so after the error, it is necessary to continue from there, rather than the next packet. That is achieved by setting pkt_step to zero. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1520431349-30689-4-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Adrian Hunter
|
6a33036b13 |
perf intel-pt: Fix sync_switch
commit 63d8e38f6ae6c36dd5b5ba0e8c112e8861532ea2 upstream. sync_switch is a facility to synchronize decoding more closely with the point in the kernel when the context actually switched. The flag when sync_switch is enabled was global to the decoding, whereas it is really specific to the CPU. The trace data for different CPUs is put on different queues, so add sync_switch to the intel_pt_queue structure and use that in preference to the global setting in the intel_pt structure. That fixes problems decoding one CPU's trace because sync_switch was disabled on a different CPU's queue. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1520431349-30689-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Adrian Hunter
|
aad2ad6e3c |
perf intel-pt: Fix overlap detection to identify consecutive buffers correctly
commit 117db4b27bf08dba412faf3924ba55fe970c57b8 upstream. Overlap detection was not not updating the buffer's 'consecutive' flag. Marking buffers consecutive has the advantage that decoding begins from the start of the buffer instead of the first PSB. Fix overlap detection to identify consecutive buffers correctly. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1520431349-30689-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
8683408f8e |
Merge 4.9.94 into android-4.9
Changes in 4.9.94 qed: Fix overriding of supported autoneg value. cfg80211: make RATE_INFO_BW_20 the default md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock rtc: snvs: fix an incorrect check of return value x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic() x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility ovl: persistent inode numbers for upper hardlinks NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION x86/boot: Declare error() as noreturn IB/srpt: Fix abort handling IB/srpt: Avoid that aborting a command triggers a kernel warning af_key: Fix slab-out-of-bounds in pfkey_compile_policy. mac80211: bail out from prep_connection() if a reconfig is ongoing bna: Avoid reading past end of buffer qlge: Avoid reading past end of buffer ubi: fastmap: Fix slab corruption ipmi_ssif: unlock on allocation failure net: cdc_ncm: Fix TX zero padding net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control lockd: fix lockd shutdown race drivers/misc/vmw_vmci/vmci_queue_pair.c: fix a couple integer overflow tests pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid() s390: move _text symbol to address higher than zero net/mlx4_en: Avoid adding steering rules with invalid ring qed: Correct doorbell configuration for !4Kb pages NFSv4.1: Work around a Linux server bug... CIFS: silence lockdep splat in cifs_relock_file() perf/callchain: Force USER_DS when invoking perf_callchain_user() blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op net: qca_spi: Fix alignment issues in rx path netxen_nic: set rcode to the return status from the call to netxen_issue_cmd mdio: mux: Correct mdio_mux_init error path issues Input: elan_i2c - check if device is there before really probing Input: elantech - force relative mode on a certain module KVM: PPC: Book3S PR: Check copy_to/from_user return values irqchip/mbigen: Fix the clear register offset calculation vmxnet3: ensure that adapter is in proper state during force_close mm, vmstat: Remove spurious WARN() during zoneinfo print SMB2: Fix share type handling bus: brcmstb_gisb: Use register offsets with writes too bus: brcmstb_gisb: correct support for 64-bit address output PowerCap: Fix an error code in powercap_register_zone() iio: pressure: zpa2326: report interrupted case as failure ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning clk: renesas: rcar-gen2: Fix PLL0 on R-Car V2H and E2 x86/tsc: Provide 'tsc=unstable' boot parameter powerpc/modules: If mprofile-kernel is enabled add it to vermagic ARM: dts: imx6qdl-wandboard: Fix audio channel swap i2c: mux: reg: put away the parent i2c adapter on probe failure arm64: perf: Ignore exclude_hv when kernel is running in HYP mdio: mux: fix device_node_continue.cocci warnings ipv6: avoid dad-failures for addresses with NODAD async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome() KVM: arm: Restore banked registers and physical timer access on hyp_panic() KVM: arm64: Restore host physical timer access on hyp_panic() usb: dwc3: keystone: check return value btrfs: fix incorrect error return ret being passed to mapping_set_error ata: libahci: properly propagate return value of platform_get_irq() ipmr: vrf: Find VIFs using the actual device uio: fix incorrect memory leak cleanup neighbour: update neigh timestamps iff update is effective arp: honour gratuitous ARP _replies_ ARM: dts: rockchip: fix rk322x i2s1 pinctrl error usb: chipidea: properly handle host or gadget initialization failure pxa_camera: fix module remove codepath for v4l2 clock USB: ene_usb6250: fix first command execution net: x25: fix one potential use-after-free issue USB: ene_usb6250: fix SCSI residue overwriting serial: 8250: omap: Disable DMA for console UART serial: sh-sci: Fix race condition causing garbage during shutdown net/wan/fsl_ucc_hdlc: fix unitialized variable warnings net/wan/fsl_ucc_hdlc: fix incorrect memory allocation fsl/qe: add bit description for SYNL register for GUMR sh_eth: Use platform device for printing before register_netdev() mlxsw: spectrum: Avoid possible NULL pointer dereference scsi: csiostor: fix use after free in csio_hw_use_fwconfig() powerpc/mm: Fix virt_addr_valid() etc. on 64-bit hash ath5k: fix memory leak on buf on failed eeprom read selftests/powerpc: Fix TM resched DSCR test with some compilers xfrm: fix state migration copy replay sequence numbers ASoC: simple-card: fix mic jack initialization iio: hi8435: avoid garbage event at first enable iio: hi8435: cleanup reset gpio iio: light: rpr0521 poweroff for probe fails ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors md-cluster: fix potential lock issue in add_new_disk ARM: davinci: da8xx: Create DSP device only when assigned memory ray_cs: Avoid reading past end of buffer net/wan/fsl_ucc_hdlc: fix muram allocation error leds: pca955x: Correct I2C Functionality perf/core: Fix error handling in perf_event_alloc() sched/numa: Use down_read_trylock() for the mmap_sem gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs net/mlx5: Tolerate irq_set_affinity_hint() failures selinux: do not check open permission on sockets block: fix an error code in add_partition() mlx5: fix bug reading rss_hash_type from CQE net: ieee802154: fix net_device reference release too early libceph: NULL deref on crush_decode() error path perf report: Fix off-by-one for non-activation frames netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() ASoC: rsnd: SSI PIO adjust to 24bit mode scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats() fix race in drivers/char/random.c:get_reg() ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff() ARM64: PCI: Fix struct acpi_pci_root_ops allocation failure path tcp: better validation of received ack sequences net: move somaxconn init from sysctl code Input: elan_i2c - clear INT before resetting controller bonding: Don't update slave->link until ready to commit cpuhotplug: Link lock stacks for hotplug callbacks PCI/msi: fix the pci_alloc_irq_vectors_affinity stub KVM: X86: Fix preempt the preemption timer cancel KVM: nVMX: Fix handling of lmsw instruction net: llc: add lock_sock in llc_ui_bind to avoid a race condition drm/msm: Take the mutex before calling msm_gem_new_impl i40iw: Fix sequence number for the first partial FPDU i40iw: Correct Q1/XF object count equation ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node thermal: power_allocator: fix one race condition issue for thermal_instances list perf probe: Add warning message if there is unexpected event name l2tp: fix missing print session offset info rds; Reset rs->rs_bound_addr in rds_add_bound() failure path ACPI / video: Default lcd_only to true on Win8-ready and newer machines net/mlx4_en: Change default QoS settings VFS: close race between getcwd() and d_move() PM / devfreq: Fix potential NULL pointer dereference in governor_store hwmon: (ina2xx) Make calibration register value fixed media: videobuf2-core: don't go out of the buffer range ASoC: Intel: Skylake: Disable clock gating during firmware and library download ASoC: Intel: cht_bsw_rt5645: Analog Mic support scsi: libiscsi: Allow sd_shutdown on bad transport scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry ACPI: EC: Fix debugfs_create_*() usage mac80211: Fix setting TX power on monitor interfaces vfb: fix video mode and line_length being set when loaded gpio: label descriptors using the device name IB/rdmavt: Allocate CQ memory on the correct node blk-mq: fix race between updating nr_hw_queues and switching io sched backlight: tdo24m: Fix the SPI CS between transfers pinctrl: baytrail: Enable glitch filter for GPIOs used as interrupts ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()' rt2x00: do not pause queue unconditionally on error path wl1251: check return from call to wl1251_acx_arp_ip_filter hdlcdrv: Fix divide by zero in hdlcdrv_ioctl x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map netfilter: conntrack: don't call iter for non-confirmed conntracks HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices ovl: filter trusted xattr for non-admin powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE] dmaengine: imx-sdma: Handle return value of clk_prepare_enable backlight: Report error on failure arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage net/mlx5: avoid build warning for uniprocessor cxgb4: FW upgrade fixes cxgb4: Fix netdev_features flag rtc: m41t80: fix SQW dividers override when setting a date i40evf: fix merge error in older patch rtc: opal: Handle disabled TPO in opal_get_tpo_time() rtc: interface: Validate alarm-time before handling rollover SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() net: freescale: fix potential null pointer dereference clk: at91: fix clk-generated parenting drm/sun4i: Ignore the generic connectors for components dt-bindings: display: sun4i: Add allwinner,tcon-channel property mtd: nand: gpmi: Fix gpmi_nand_init() error path mtd: nand: check ecc->total sanity in nand_scan_tail KVM: SVM: do not zero out segment attributes if segment is unusable or not present clk: scpi: fix return type of __scpi_dvfs_round_rate clk: Fix __set_clk_rates error print-string powerpc/spufs: Fix coredump of SPU contexts drm/amdkfd: NULL dereference involving create_process() ath10k: add BMI parameters to fix calibration from DT/pre-cal perf trace: Add mmap alias for s390 qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M arm64: kernel: restrict /dev/mem read() calls to linear region mISDN: Fix a sleep-in-atomic bug net: phy: micrel: Restore led_mode and clk_sel on resume RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers RDMA/hfi1: fix array termination by appending NULL to attr array drm/omap: fix tiled buffer stride calculations powerpc/8xx: fix mpc8xx_get_irq() return on no irq cxgb4: fix incorrect cim_la output for T6 Fix serial console on SNI RM400 machines bio-integrity: Do not allocate integrity context for bio w/o data ip6_tunnel: fix traffic class routing for tunnels skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow macsec: check return value of skb_to_sgvec always sit: reload iphdr in ipip6_rcv net/mlx4: Fix the check in attaching steering rules net/mlx4: Check if Granular QoS per VF has been enabled before updating QP qos_vport perf header: Set proper module name when build-id event found perf report: Ensure the perf DSO mapping matches what libdw sees iwlwifi: mvm: fix firmware debug restart recording watchdog: f71808e_wdt: Add F71868 support iwlwifi: mvm: Fix command queue number on d0i3 flow iwlwifi: tt: move ucode_loaded check under mutex iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3 iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265 tags: honor COMPILED_SOURCE with apart output directory ARM: dts: qcom: ipq4019: fix i2c_0 node e1000e: fix race condition around skb_tstamp_tx() igb: fix race condition with PTP_TX_IN_PROGRESS bits cxl: Unlock on error in probe cx25840: fix unchecked return values mceusb: sporadic RX truncation corruption fix net: phy: avoid genphy_aneg_done() for PHYs without clause 22 support ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull nvme-pci: fix multiple ctrl removal scheduling nvme: fix hang in remove path KVM: nVMX: Update vmcs12->guest_linear_address on nested VM-exit e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails perf/core: Correct event creation with PERF_FORMAT_GROUP sched/deadline: Use the revised wakeup rule for suspending constrained dl tasks MIPS: mm: fixed mappings: correct initialisation MIPS: mm: adjust PKMAP location MIPS: kprobes: flush_insn_slot should flush only if probe initialised ARM: dts: armadillo800eva: Split LCD mux and gpio Fix loop device flush before configure v3 net: emac: fix reset timeout with AR8035 phy perf tools: Decompress kernel module when reading DSO data perf tests: Decompress kernel module before objdump skbuff: only inherit relevant tx_flags xen: avoid type warning in xchg_xen_ulong X.509: Fix error code in x509_cert_parse() pinctrl: meson-gxbb: remove non-existing pin GPIOX_22 coresight: Fix reference count for software sources coresight: tmc: Configure DMA mask appropriately stmmac: fix ptp header for GMAC3 hw timestamp geneve: add missing rx stats accounting crypto: omap-sham - buffer handling fixes for hashing later crypto: omap-sham - fix closing of hash with separate finalize call bnx2x: Allow vfs to disable txvlan offload sctp: fix recursive locking warning in sctp_do_peeloff net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272 sparc64: ldc abort during vds iso boot iio: magnetometer: st_magn_spi: fix spi_device_id table net: ena: fix rare uncompleted admin command false alarm net: ena: fix race condition between submit and completion admin command net: ena: add missing return when ena_com_get_io_handlers() fails net: ena: add missing unmap bars on device removal net: ena: disable admin msix while working in polling mode clk: meson: meson8b: add compatibles for Meson8 and Meson8m2 Bluetooth: Send HCI Set Event Mask Page 2 command only when needed cpuidle: dt: Add missing 'of_node_put()' ACPICA: OSL: Add support to exclude stdarg.h ACPICA: Events: Add runtime stub support for event APIs ACPICA: Disassembler: Abort on an invalid/unknown AML opcode s390/dasd: fix hanging safe offline vxlan: dont migrate permanent fdb entries during learn hsr: fix incorrect warning selftests: kselftest_harness: Fix compile warning drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling path bcache: stop writeback thread after detaching bcache: segregate flash only volume write streams scsi: libsas: fix memory leak in sas_smp_get_phy_events() scsi: libsas: fix error when getting phy events scsi: libsas: initialize sas_phy status according to response of DISCOVER blk-mq: fix kernel oops in blk_mq_tag_idle() tty: n_gsm: Allow ADM response in addition to UA for control dlci EDAC, mv64x60: Fix an error handling path cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages sdhci: Advertise 2.0v supply on SDIO host controller Input: goodix - disable IRQs while suspended mtd: mtd_oobtest: Handle bitflips during reads perf tools: Fix copyfile_offset update of output offset ipsec: check return value of skb_to_sgvec always rxrpc: check return value of skb_to_sgvec always virtio_net: check return value of skb_to_sgvec always virtio_net: check return value of skb_to_sgvec in one more location random: use lockless method of accessing and updating f->reg_idx clk: at91: fix clk-generated compilation arp: fix arp_filter on l3slave devices ipv6: the entire IPv6 header chain must fit the first fragment net: fix possible out-of-bound read in skb_network_protocol() net/ipv6: Fix route leaking between VRFs net/ipv6: Increment OUTxxx counters after netfilter hook netlink: make sure nladdr has correct size in netlink_connect() net/sched: fix NULL dereference in the error path of tcf_bpf_init() pptp: remove a buggy dst release in pptp_connect() r8169: fix setting driver_data after register_netdev sctp: do not leak kernel memory to user space sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6 sky2: Increase D3 delay to sky2 stops working after suspend vhost: correctly remove wait queue during poll failure vlan: also check phy_driver ts_info for vlan's real device bonding: fix the err path for dev hwaddr sync in bond_enslave bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave bonding: process the err returned by dev_set_allmulti properly in bond_enslave net: fool proof dev_valid_name() ip_tunnel: better validate user provided tunnel names ipv6: sit: better validate user provided tunnel names ip6_gre: better validate user provided tunnel names ip6_tunnel: better validate user provided tunnel names vti6: better validate user provided tunnel names net/mlx5e: Sync netdev vxlan ports at open net/sched: fix NULL dereference in the error path of tunnel_key_init() net/sched: fix NULL dereference on the error path of tcf_skbmod_init() net/mlx4_en: Fix mixed PFC and Global pause user control requests vhost: validate log when IOTLB is enabled route: check sysctl_fib_multipath_use_neigh earlier than hash team: move dev_mc_sync after master_upper_dev_link in team_port_add vhost_net: add missing lock nesting notation net/mlx4_core: Fix memory leak while delete slave's resources strparser: Fix sign of err codes net sched actions: fix dumping which requires several messages to user space vrf: Fix use after free and double free in vrf_finish_output Revert "xhci: plat: Register shutdown for xhci_plat" Linux 4.9.94 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> |
||
|
Jiri Olsa
|
720f627778 |
perf tools: Fix copyfile_offset update of output offset
[ Upstream commit fa1195ccc0af2d121abe0fe266a1caee8c265eea ]
We need to increase output offset in each iteration, not decrease it as
we currently do.
I guess we were lucky to finish in most cases in first iteration, so the
bug never showed. However it shows a lot when working with big (~4GB)
size data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
|
||
|
Mickaël Salaün
|
db14d75643 |
selftests: kselftest_harness: Fix compile warning
[ Upstream commit 34a048cc06802556e5f96f325dc32cc2f6a11225 ]
Do not confuse the compiler with a semicolon preceding a block. Replace
the semicolon with an empty block to avoid a warning:
gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o /.../linux/tools/testing/selftests/seccomp/seccomp_bpf
In file included from seccomp_bpf.c:40:0:
seccomp_bpf.c: In function ‘change_syscall’:
../kselftest_harness.h:558:2: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
for (; _metadata->trigger; _metadata->trigger = __bail(_assert))
^
../kselftest_harness.h:574:14: note: in expansion of macro ‘OPTIONAL_HANDLER’
} while (0); OPTIONAL_HANDLER(_assert)
^~~~~~~~~~~~~~~~
../kselftest_harness.h:440:2: note: in expansion of macro ‘__EXPECT’
__EXPECT(expected, seen, ==, 0)
^~~~~~~~
seccomp_bpf.c:1313:2: note: in expansion of macro ‘EXPECT_EQ’
EXPECT_EQ(0, ret);
^~~~~~~~~
seccomp_bpf.c:1317:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘for’
{
^
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Will Drewry <wad@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Namhyung Kim
|
7525a238be |
perf tests: Decompress kernel module before objdump
[ Upstream commit 94df1040b1e6aacd8dec0ba3c61d7e77cd695f26 ] If a kernel modules is compressed, it should be decompressed before running objdump to parse binary data correctly. This fixes a failure of object code reading test for me. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Namhyung Kim
|
e2d054998b |
perf tools: Decompress kernel module when reading DSO data
[ Upstream commit 1d6b3c9ba756a5134fd7ad1959acac776d17404b ] Currently perf decompresses kernel modules when loading the symbol table but it missed to do it when reading raw data. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Milian Wolff
|
aee0f56512 |
perf report: Ensure the perf DSO mapping matches what libdw sees
[ Upstream commit 2538b9e2450ae255337c04356e9e0f8cb9ec48d9 ] In some situations the libdw unwinder stopped working properly. I.e. with libunwind we see: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) 608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) f199 call_init.part.0 (/usr/lib/ld-2.25.so) f2a5 _dl_init (/usr/lib/ld-2.25.so) db9 _dl_start_user (/usr/lib/ld-2.25.so) ~~~~~ But with libdw and without this patch this sample is not properly unwound: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) ~~~~~ Debug output showed me that libdw found a module for the last frame address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch double-checks what libdw sees and what perf knows. If the mappings mismatch, we now report the elf known to perf. This fixes the situation above, and the libdw unwinder produces the same stack as libunwind. Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20170602143753.16907-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Namhyung Kim
|
81da672aec |
perf header: Set proper module name when build-id event found
[ Upstream commit 1deec1bd96ccd8beb04d2112a6d12fe20505c3a6 ] When perf processes build-id event, it creates DSOs with the build-id. But it didn't set the module short name (like '[module-name]') so when processing a kernel mmap event of the module, it cannot found the DSO as it only checks the short names. That leads for perf to create a same DSO without the build-id info and it'll lookup the system path even if the DSO is already in the build-id cache. After kernel was updated, perf cannot find the DSO and cannot show symbols in it anymore. You can see this if you have an old data file (w/ old kernel version): $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols ... The second message didn't show the build-id. With this patch: $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols ... Now it shows the build-id but still cannot load the symbol table. This is a different problem which will be fixed in the next patch. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170531120105.21731-1-namhyung@kernel.org [ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jiri Olsa
|
2761edad2f |
perf trace: Add mmap alias for s390
[ Upstream commit 54265664c15a68905d8d67d19205e9a767636434 ]
The s390 architecture maps sys_mmap (nr 90) into sys_old_mmap. For this
reason perf trace can't find the proper syscall event to get args format
from and displays it wrongly as 'continued'.
To fix that fill the "alias" field with "old_mmap" for trace's mmap record
to get the correct translation.
Before:
0.042 ( 0.011 ms): vest/43052 fstat(statbuf: 0x3ffff89fd90 ) = 0
0.042 ( 0.028 ms): vest/43052 ... [continued]: mmap()) = 0x3fffd6e2000
0.072 ( 0.025 ms): vest/43052 read(buf: 0x3fffd6e2000, count: 4096 ) = 6
After:
0.045 ( 0.011 ms): fstat(statbuf: 0x3ffff8a0930 ) = 0
0.057 ( 0.018 ms): mmap(arg: 0x3ffff8a0858 ) = 0x3fffd14a000
0.076 ( 0.025 ms): read(buf: 0x3fffd14a000, count: 4096 ) = 6
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170531113557.19175-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Masami Hiramatsu
|
24cce930dc |
perf probe: Add warning message if there is unexpected event name
[ Upstream commit 9f5c6d8777a2d962b0eeacb2a16f37da6bea545b ]
This improve the error message so that user can know event-name error
before writing new events to kprobe-events interface.
E.g.
======
#./perf probe -x /lib64/libc-2.25.so malloc_get_state*
Internal error: "malloc_get_state@GLIBC_2" is an invalid event name.
Error: Failed to add events.
======
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151275040665.24652.5188568529237584489.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Milian Wolff
|
695d3a35e4 |
perf report: Fix off-by-one for non-activation frames
[ Upstream commit 1982ad48fc82c284a5cc55697a012d3357e84d01 ]
As the documentation for dwfl_frame_pc says, frames that
are no activation frames need to have their program counter
decremented by one to properly find the function of the caller.
This fixes many cases where perf report currently attributes
the cost to the next line. I.e. I have code like this:
~~~~~~~~~~~~~~~
#include <thread>
#include <chrono>
using namespace std;
int main()
{
this_thread::sleep_for(chrono::milliseconds(1000));
this_thread::sleep_for(chrono::milliseconds(100));
this_thread::sleep_for(chrono::milliseconds(10));
return 0;
}
~~~~~~~~~~~~~~~
Now compile and record it:
~~~~~~~~~~~~~~~
g++ -std=c++11 -g -O2 test.cpp
echo 1 | sudo tee /proc/sys/kernel/sched_schedstats
perf record \
--event sched:sched_stat_sleep \
--event sched:sched_process_exit \
--event sched:sched_switch --call-graph=dwarf \
--output perf.data.raw \
./a.out
echo 0 | sudo tee /proc/sys/kernel/sched_schedstats
perf inject --sched-stat --input perf.data.raw --output perf.data
~~~~~~~~~~~~~~~
Before this patch, the report clearly shows the off-by-one issue.
Most notably, the last sleep invocation is incorrectly attributed
to the "return 0;" line:
~~~~~~~~~~~~~~~
Overhead Source:Line
........ ...........
100.00% core.c:0
|
---__schedule core.c:0
schedule
do_nanosleep hrtimer.c:0
hrtimer_nanosleep
sys_nanosleep
entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
__nanosleep_nocancel .:0
std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
|
|--90.08%--main test.cpp:9
| __libc_start_main
| _start
|
|--9.01%--main test.cpp:10
| __libc_start_main
| _start
|
--0.91%--main test.cpp:13
__libc_start_main
_start
~~~~~~~~~~~~~~~
With this patch here applied, the issue is fixed. The report becomes
much more usable:
~~~~~~~~~~~~~~~
Overhead Source:Line
........ ...........
100.00% core.c:0
|
---__schedule core.c:0
schedule
do_nanosleep hrtimer.c:0
hrtimer_nanosleep
sys_nanosleep
entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
__nanosleep_nocancel .:0
std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
|
|--90.08%--main test.cpp:8
| __libc_start_main
| _start
|
|--9.01%--main test.cpp:9
| __libc_start_main
| _start
|
--0.91%--main test.cpp:10
__libc_start_main
_start
~~~~~~~~~~~~~~~
Similarly it works for signal frames:
~~~~~~~~~~~~~~~
__noinline void bar(void)
{
volatile long cnt = 0;
for (cnt = 0; cnt < 100000000; cnt++);
}
__noinline void foo(void)
{
bar();
}
void sig_handler(int sig)
{
foo();
}
int main(void)
{
signal(SIGUSR1, sig_handler);
raise(SIGUSR1);
foo();
return 0;
}
~~~~~~~~~~~~~~~~
Before, the report wrongly points to `signal.c:29` after raise():
~~~~~~~~~~~~~~~~
$ perf report --stdio --no-children -g srcline -s srcline
...
100.00% signal.c:11
|
---bar signal.c:11
|
|--50.49%--main signal.c:29
| __libc_start_main
| _start
|
--49.51%--0x33a8f
raise .:0
main signal.c:29
__libc_start_main
_start
~~~~~~~~~~~~~~~~
With this patch in, the issue is fixed and we instead get:
~~~~~~~~~~~~~~~~
100.00% signal signal [.] bar
|
---bar signal.c:11
|
|--50.49%--main signal.c:29
| __libc_start_main
| _start
|
--49.51%--0x33a8f
raise .:0
main signal.c:27
__libc_start_main
_start
~~~~~~~~~~~~~~~~
Note how this patch fixes this issue for both unwinding methods, i.e.
both dwfl and libunwind. The former case is straight-forward thanks
to dwfl_frame_pc(). For libunwind, we replace the functionality via
unw_is_signal_frame() for any but the very first frame.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-4-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Michael Ellerman
|
35253ff9e9 |
selftests/powerpc: Fix TM resched DSCR test with some compilers
[ Upstream commit fe06fe860250a4f01d0eaf70a2563b1997174a74 ]
The tm-resched-dscr test has started failing sometimes, depending on
what compiler it's built with, eg:
test: tm_resched_dscr
Check DSCR TM context switch: tm-resched-dscr: tm-resched-dscr.c:76: test_body: Assertion `rv' failed.
!! child died by signal 6
When it fails we see that the compiler doesn't initialise rv to 1 before
entering the inline asm block. Although that's counter intuitive, it
is allowed because we tell the compiler that the inline asm will write
to rv (using "=r"), meaning the original value is irrelevant.
Marking it as a read/write parameter would presumably work, but it seems
simpler to fix it by setting the initial value of rv in the inline asm.
Fixes:
|
||
|
Greg Kroah-Hartman
|
bb94f9d8f5 |
Merge 4.9.91 into android-4.9
Changes in 4.9.91
MIPS: ralink: Remove ralink_halt()
iio: st_pressure: st_accel: pass correct platform data to init
ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit
ALSA: aloop: Sync stale timer before release
ALSA: aloop: Fix access to not-yet-ready substream via cable
ALSA: hda/realtek - Always immediately update mute LED with pin VREF
mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
ahci: Add PCI-id for the Highpoint Rocketraid 644L card
clk: bcm2835: Fix ana->maskX definitions
clk: bcm2835: Protect sections updating shared registers
clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174
libata: fix length validation of ATAPI-relayed SCSI commands
libata: remove WARN() for DMA or PIO command without data
libata: don't try to pass through NCQ commands to non-NCQ devices
libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
libata: disable LPM for Crucial BX100 SSD 500GB drive
libata: Enable queued TRIM for Samsung SSD 860
libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
nfsd: remove blocked locks on client teardown
mm/vmalloc: add interfaces to free unmapped page table
x86/mm: implement free pmd/pte page interfaces
mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
mm/thp: do not wait for lock_page() in deferred_split_scan()
mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
drm/vmwgfx: Fix a destoy-while-held mutex problem.
drm/radeon: Don't turn off DP sink when disconnected
drm: udl: Properly check framebuffer mmap offsets
acpi, numa: fix pxm to online numa node associations
ACPI / watchdog: Fix off-by-one error at resource assignment
libnvdimm, {btt, blk}: do integrity setup before add_disk()
brcmfmac: fix P2P_DEVICE ethernet address generation
rtlwifi: rtl8723be: Fix loss of signal
tracing: probeevent: Fix to support minus offset from symbol
mtdchar: fix usage of mtd_ooblayout_ecc()
mtd: nand: fsl_ifc: Fix nand waitfunc return value
mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0
mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0
staging: ncpfs: memory corruption in ncp_read_kernel()
can: ifi: Repair the error handling
can: ifi: Check core revision upon probe
can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack
can: cc770: Fix queue stall & dropped RTR reply
can: cc770: Fix use after free in cc770_tx_interrupt()
tty: vt: fix up tabstops properly
selftests/x86/ptrace_syscall: Fix for yet more glibc interference
kvm/x86: fix icebp instruction handling
x86/build/64: Force the linker to use 2MB page size
x86/boot/64: Verify alignment of the LOAD segment
x86/entry/64: Don't use IST entry for #BP stack
perf/x86/intel/uncore: Fix Skylake UPI event format
perf stat: Fix CVS output format for non-supported counters
perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period()
perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers
iio: ABI: Fix name of timestamp sysfs file
staging: lustre: ptlrpc: kfree used instead of kvfree
selftests, x86, protection_keys: fix wrong offset in siginfo
selftests/x86/protection_keys: Fix syscall NR redefinition warnings
signal/testing: Don't look for __SI_FAULT in userspace
x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
selftests: x86: sysret_ss_attrs doesn't build on a PIE build
kbuild: disable clang's default use of -fmerge-all-constants
bpf: skip unnecessary capability check
bpf, x64: increase number of passes
Linux 4.9.91
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
||
|
Shuah Khan
|
353f71fe3c |
selftests: x86: sysret_ss_attrs doesn't build on a PIE build
commit 3346a6a4e5ba8c040360f753b26938cec31a4bdc upstream. sysret_ss_attrs fails to compile leading x86 test run to fail on systems configured to build using PIE by default. Add -no-pie fix it. Relocation might still fail if relocated above 4G. For now this change fixes the build and runs x86 tests. tools/testing/selftests/x86$ make gcc -m64 -o .../tools/testing/selftests/x86/single_step_syscall_64 -O2 -g -std=gnu99 -pthread -Wall single_step_syscall.c -lrt -ldl gcc -m64 -o .../tools/testing/selftests/x86/sysret_ss_attrs_64 -O2 -g -std=gnu99 -pthread -Wall sysret_ss_attrs.c thunks.S -lrt -ldl /usr/bin/ld: /tmp/ccS6pvIh.o: relocation R_X86_64_32S against `.text' can not be used when making a shared object; recompile with -fPIC /usr/bin/ld: final link failed: Nonrepresentable section on output collect2: error: ld returned 1 exit status Makefile:49: recipe for target '.../tools/testing/selftests/x86/sysret_ss_attrs_64' failed make: *** [.../tools/testing/selftests/x86/sysret_ss_attrs_64] Error 1 Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Dave Hansen
|
1443abc903 |
x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
commit 91c49c2deb96ffc3c461eaae70219d89224076b7 upstream. 'si_pkey' is now #defined to be the name of the new siginfo field that protection keys uses. Rename it not to conflict. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171111001231.DFFC8285@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Eric W. Biederman
|
f41f8156ae |
signal/testing: Don't look for __SI_FAULT in userspace
commit d12fe87e62d773e81e0cb3a123c5a480a10d7d91 upstream. Fix the debug print statements in these tests where they reference si_codes and in particular __SI_FAULT. __SI_FAULT is a kernel internal value and should never be seen by userspace. While I am in there also fix si_code_str. si_codes are an enumeration there are not a bitmap so == and not & is the apropriate operation to test for an si_code. Cc: Dave Hansen <dave.hansen@linux.intel.com> Fixes: |
||
|
Andy Lutomirski
|
93b4839239 |
selftests/x86/protection_keys: Fix syscall NR redefinition warnings
commit 693cb5580fdb026922363aa103add64b3ecd572e upstream. On new enough glibc, the pkey syscalls numbers are available. Check first before defining them to avoid warnings like: protection_keys.c:198:0: warning: "SYS_pkey_alloc" redefined Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1fbef53a9e6befb7165ff855fc1a7d4788a191d6.1509794321.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Dave Hansen
|
26e9852f9d |
selftests, x86, protection_keys: fix wrong offset in siginfo
commit 2195bff041486eb7fcceaf058acaedcd057efbdc upstream. The siginfo contains a bunch of information about the fault. For protection keys, it tells us which protection key's permissions were violated. The wrong offset in here leads to reading garbage and thus failures in the tests. We should probably eventually move this over to using the kernel's headers defining the siginfo instead of a hard-coded offset. But, for now, just do the simplest fix. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ilya Pronin
|
a8b3a6a4ae |
perf stat: Fix CVS output format for non-supported counters
commit 40c21898ba5372c14ef71717040529794a91ccc2 upstream.
When printing stats in CSV mode, 'perf stat' appends extra separators
when a counter is not supported:
<not supported>,,L1-dcache-store-misses,mesos/bd442f34-2b4a-47df-b966-9b281f9f56fc,0,100.00,,,,
Which causes a failure when parsing fields. The numbers of separators
should be the same for each line, no matter if the counter is or not
supported.
Signed-off-by: Ilya Pronin <ipronin@twitter.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20180306064353.31930-1-xiyou.wangcong@gmail.com
Fixes:
|
||
|
Andy Lutomirski
|
c68a7a87e1 |
selftests/x86/ptrace_syscall: Fix for yet more glibc interference
commit 4b0b37d4cc54b21a6ecad7271cbc850555869c62 upstream. glibc keeps getting cleverer, and my version now turns raise() into more than one syscall. Since the test relies on ptrace seeing an exact set of syscalls, this breaks the test. Replace raise(SIGSTOP) with syscall(SYS_tgkill, ...) to force glibc to get out of our way. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kselftest@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/bc80338b453afa187bc5f895bd8e2c8d6e264da2.1521300271.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
dd1e37e646 |
Merge 4.9.90 into android-4.9
Changes in 4.9.90 tpm: fix potential buffer overruns caused by bit glitches on the bus ASoC: rsnd: check src mod pointer for rsnd_mod_id() SMB3: Validate negotiate request must always be signed CIFS: Enable encryption during session setup phase staging: android: ashmem: Fix possible deadlock in ashmem_ioctl Revert "led: core: Fix brightness setting when setting delay_off=0" led: core: Clear LED_BLINK_SW flag in led_blink_set() platform/x86: asus-nb-wmi: Add wapf4 quirk for the X302UA bonding: handle link transition from FAIL to UP correctly regulator: anatop: set default voltage selector for pcie power: supply: bq24190_charger: Limit over/under voltage fault logging x86: i8259: export legacy_pic symbol rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs Input: ar1021_i2c - fix too long name in driver's device table time: Change posix clocks ops interfaces to use timespec64 ACPI/processor: Fix error handling in __acpi_processor_start() ACPI/processor: Replace racy task affinity logic cpufreq/sh: Replace racy task affinity logic genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs i2c: i2c-scmi: add a MS HID net: ipv6: send unsolicited NA on admin up media/dvb-core: Race condition when writing to CAM btrfs: fix a bogus warning when converting only data or metadata ASoC: Intel: Atom: update Thinkpad 10 quirk tools/testing/nvdimm: fix nfit_test shutdown crash spi: dw: Disable clock after unregistering the host powerpc/64s: Remove SAO feature from Power9 DD1 ath: Fix updating radar flags for coutry code India clk: ns2: Correct SDIO bits iwlwifi: split the handler and the wake parts of the notification infra iwlwifi: a000: fix memory offsets and lengths scsi: virtio_scsi: Always try to read VPD pages KVM: PPC: Book3S PR: Exit KVM on failed mapping mwifiex: don't leak 'chan_stats' on reset x86/reboot: Turn off KVM when halting a CPU ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER irqchip/mips-gic: Separate IPI reservation & usage tracking iommu/omap: Register driver before setting IOMMU ops md/raid10: wait up frozen array in handle_write_completed NFS: Fix missing pg_cleanup after nfs_pageio_cond_complete() tcp: remove poll() flakes with FastOpen e1000e: fix timing for 82579 Gigabit Ethernet controller ALSA: hda - Fix headset microphone detection for ASUS N551 and N751 IB/ipoib: Fix deadlock between ipoib_stop and mcast join flow IB/ipoib: Update broadcast object if PKey value was changed in index 0 HSI: ssi_protocol: double free in ssip_pn_xmit() IB/mlx4: Take write semaphore when changing the vma struct IB/mlx4: Change vma from shared to private IB/mlx5: Take write semaphore when changing the vma struct IB/mlx5: Change vma from shared to private IB/mlx5: Set correct SL in completion for RoCE ASoC: Intel: Skylake: Uninitialized variable in probe_codec() ibmvnic: Disable irq prior to close netvsc: Deal with rescinded channels correctly Fix driver usage of 128B WQEs when WQ_CREATE is V1. Fix Express lane queue creation. gpio: gpio-wcove: fix irq pending status bit width netfilter: xt_CT: fix refcnt leak on error path openvswitch: Delete conntrack entry clashing with an expectation. netfilter: nf_ct_helper: permit cthelpers with different names via nfnetlink mmc: host: omap_hsmmc: checking for NULL instead of IS_ERR() tipc: check return value of nlmsg_new wan: pc300too: abort path on failure qlcnic: fix unchecked return value netfilter: nft_dynset: continue to next expr if _OP_ADD succeeded platform/x86: intel-vbtn: add volume up and down scsi: mac_esp: Replace bogus memory barrier with spinlock infiniband/uverbs: Fix integer overflows pNFS: Fix use after free issues in pnfs_do_read() xprtrdma: Cancel refresh worker during buffer shutdown NFS: don't try to cross a mountpount when there isn't one there. iio: st_pressure: st_accel: Initialise sensor platform data properly mt7601u: check return value of alloc_skb libertas: check return value of alloc_workqueue rndis_wlan: add return value validation Btrfs: fix incorrect space accounting after failure to insert inline extent Btrfs: send, fix file hole not being preserved due to inline extent Btrfs: fix extent map leak during fallocate error path orangefs: do not wait for timeout if umounting mac80211: don't parse encrypted management frames in ieee80211_frame_acked ACPICA: iasl: Fix IORT SMMU GSI disassembling iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value dt-bindings: mfd: axp20x: Add "xpowers,master-mode" property for AXP806 PMICs mfd: palmas: Reset the POWERHOLD mux during power off mtip32xx: use runtime tag to initialize command header x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails gpio: gpio-wcove: fix GPIO IRQ status mask staging: unisys: visorhba: fix s-Par to boot with option CONFIG_VMAP_STACK set to y staging: wilc1000: fix unchecked return value ipvs: explicitly forbid ipv6 service/dest creation if ipv6 mod is disabled mac80211: Fix possible sband related NULL pointer de-reference mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a netfilter: x_tables: unlock on error in xt_find_table_lock() ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP IB/rdmavt: restore IRQs on error path in rvt_create_ah() IB/hfi1: Fix softlockup issue platform/x86: asus-wmi: try to set als by default ipmi/watchdog: fix wdog hang on panic waiting for ipmi response ACPI / PMIC: xpower: Fix power_table addresses drm/amdgpu: fix gpu reset crash drm/nouveau/kms: Increase max retries in scanout position queries. jbd2: Fix lockdep splat with generic/270 test ixgbevf: fix size of queue stats length net: ethernet: ucc_geth: fix MEM_PART_MURAM mode soc/fsl/qe: round brg_freq to 1kHz granularity Bluetooth: hci_ldisc: Add protocol check to hci_uart_dequeue() Bluetooth: hci_ldisc: Add protocol check to hci_uart_tx_wakeup() vxlan: correctly handle ipv6.disable module parameter qed: Unlock on error in qed_vf_pf_acquire() bnx2x: Align RX buffers power: supply: bq24190_charger: Add disable-reset device-property power: supply: isp1704: Fix unchecked return value of devm_kzalloc power: supply: pda_power: move from timer to delayed_work Input: twl4030-pwrbutton - use correct device for irq request IB/rxe: Don't clamp residual length to mtu md/raid10: skip spare disk as 'first' disk ACPI / power: Delay turning off unused power resources after suspend ia64: fix module loading for gcc-5.4 tcm_fileio: Prevent information leak for short reads x86/xen: split xen_smp_prepare_boot_cpu() video: fbdev: udlfb: Fix buffer on stack sm501fb: don't return zero on failure path in sm501fb_start() pNFS: Fix a deadlock when coalescing writes and returning the layout net: hns: fix ethtool_get_strings overflow in hns driver cifs: small underflow in cnvrtDosUnixTm() mm: fix check for reclaimable pages in PF_MEMALLOC reclaim throttling mm, vmstat: suppress pcp stats for unpopulated zones in zoneinfo mm: hwpoison: call shake_page() after try_to_unmap() for mlocked page rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL ath10k: fix out of bounds access to local buffer perf tests kmod-path: Don't fail if compressed modules aren't supported block/mq: Cure cpu hotplug lock inversion Bluetooth: hci_qca: Avoid setup failure on missing rampatch Bluetooth: btqcomsmd: Fix skb double free corruption media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt drm/msm: fix leak in failed get_pages RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo() rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled. media: bt8xx: Fix err 'bt878_probe()' ath10k: handling qos at STA side based on AP WMM enable/disable media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect serial: 8250_dw: Disable clock on error cros_ec: fix nul-termination for firmware build info watchdog: Fix potential kref imbalance when opening watchdog platform/chrome: Use proper protocol transfer function dmaengine: zynqmp_dma: Fix race condition in the probe drm/tilcdc: ensure nonatomic iowrite64 is not used mmc: avoid removing non-removable hosts during suspend IB/ipoib: Avoid memory leak if the SA returns a different DGID RDMA/cma: Use correct size when writing netlink stats IB/umem: Fix use of npages/nmap fields iser-target: avoid reinitializing rdma contexts for isert commands vgacon: Set VGA struct resource types omapdrm: panel: fix compatible vendor string for td028ttec1 drm/omap: DMM: Check for DMM readiness after successful transaction commit pty: cancel pty slave port buf's work in tty_release coresight: Fix disabling of CoreSight TPIU pinctrl: Really force states during suspend/resume pinctrl: rockchip: enable clock when reading pin direction register iommu/vt-d: clean up pr_irq if request_threaded_irq fails ip6_vti: adjust vti mtu according to mtu of lower device RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS ARM: dts: aspeed-evb: Add unit name to memory node nfsd4: permit layoutget of executable-only files clk: Don't touch hardware when reparenting during registration clk: axi-clkgen: Correctly handle nocount bit in recalc_rate() clk: si5351: Rename internal plls to avoid name collisions dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63 IB/mlx5: Fix integer overflows in mlx5_ib_create_srq IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq clk: migrate the count of orphaned clocks at init RDMA/ucma: Fix access to non-initialized CM_ID object RDMA/ucma: Don't allow join attempts for unsupported AF family usb: gadget: f_hid: fix: Move IN request allocation to set_alt() Linux 4.9.90 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> |
||
|
Kim Phillips
|
85e598bc15 |
perf tests kmod-path: Don't fail if compressed modules aren't supported
[ Upstream commit 805b151a1afd24414706a7f6ae275fbb9649be74 ]
__kmod_path__parse() uses is_supported_compression() to determine and
parse out compressed module file extensions. On systems without zlib,
this test fails and __kmod_path__parse() continues to strcmp "ko" with
"gz". Don't do this on those systems.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
|
||
|
Dan Williams
|
61ea482ba8 |
tools/testing/nvdimm: fix nfit_test shutdown crash
[ Upstream commit 8b06b884cd98f7ec8b5028680b99fabfb7b3e192 ] Keep the nfit_test instances alive until after nfit_test_teardown(), as we may be doing resource lookups until the final un-registrations have completed. This fixes crashes of the form. BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: __release_resource+0x12/0x90 Call Trace: remove_resource+0x23/0x40 __wrap_remove_resource+0x29/0x30 [nfit_test_iomap] acpi_nfit_remove_resource+0xe/0x10 [nfit] devm_action_release+0xf/0x20 release_nodes+0x16d/0x2b0 devres_release_all+0x3c/0x60 device_release+0x21/0x90 kobject_release+0x6a/0x170 kobject_put+0x2f/0x60 put_device+0x17/0x20 platform_device_unregister+0x20/0x30 nfit_test_exit+0x36/0x960 [nfit_test] Reported-by: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
960923fdc2 |
Merge 4.9.89 into android-4.9
Changes in 4.9.89
blkcg: fix double free of new_blkg in blkcg_init_queue
Input: tsc2007 - check for presence and power down tsc2007 during probe
perf stat: Issue a HW watchdog disable hint
staging: speakup: Replace BUG_ON() with WARN_ON().
staging: wilc1000: add check for kmalloc allocation failure.
HID: reject input outside logical range only if null state is set
drm: qxl: Don't alloc fbdev if emulation is not supported
ARM: dts: r8a7791: Remove unit-address and reg from integrated cache
ARM: dts: r8a7792: Remove unit-address and reg from integrated cache
ARM: dts: r8a7793: Remove unit-address and reg from integrated cache
ARM: dts: r8a7794: Remove unit-address and reg from integrated cache
arm64: dts: r8a7796: Remove unit-address and reg from integrated cache
drm/sun4i: Fix up error path cleanup for master bind function
drm/sun4i: Set drm_crtc.port to the underlying TCON's output port node
ath10k: fix a warning during channel switch with multiple vaps
drm/sun4i: Fix TCON clock and regmap initialization sequence
PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()
selinux: check for address length in selinux_socket_bind()
x86/mm: Make mmap(MAP_32BIT) work correctly
perf sort: Fix segfault with basic block 'cycles' sort dimension
x86/mce: Handle broadcasted MCE gracefully with kexec
eventpoll.h: fix epoll event masks
i40e: Acquire NVM lock before reads on all devices
i40e: fix ethtool to get EEPROM data from X722 interface
perf tools: Make perf_event__synthesize_mmap_events() scale
ARM: brcmstb: Enable ZONE_DMA for non 64-bit capable peripherals
drivers: net: xgene: Fix hardware checksum setting
drivers: net: phy: xgene: Fix mdio write
drivers: net: xgene: Fix wrong logical operation
drivers: net: xgene: Fix Rx checksum validation logic
drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
ath10k: disallow DFS simulation if DFS channel is not enabled
ath10k: fix fetching channel during potential radar detection
usb: misc: lvs: fix race condition in disconnect handling
ARM: bcm2835: Enable missing CMA settings for VC4 driver
net: ethernet: bgmac: Allow MAC address to be specified in DTB
netem: apply correct delay when rate throttling
x86/mce: Init some CPU features early
omapfb: dss: Handle return errors in dss_init_ports()
perf probe: Fix concat_probe_trace_events
perf probe: Return errno when not hitting any event
HID: clamp input to logical range if no null state
net/8021q: create device with all possible features in wanted_features
ARM: dts: Adjust moxart IRQ controller and flags
qed: Always publish VF link from leading hwfn
s390/topology: fix typo in early topology code
zd1211rw: fix NULL-deref at probe
batman-adv: handle race condition for claims between gateways
of: fix of_device_get_modalias returned length when truncating buffers
solo6x10: release vb2 buffers in solo_stop_streaming()
x86/boot/32: Defer resyncing initial_page_table until per-cpu is set up
scsi: fnic: Fix for "Number of Active IOs" in fnicstats becoming negative
scsi: ipr: Fix missed EH wakeup
media: i2c/soc_camera: fix ov6650 sensor getting wrong clock
timers, sched_clock: Update timeout for clock wrap
sysrq: Reset the watchdog timers while displaying high-resolution timers
Input: qt1070 - add OF device ID table
sched: act_csum: don't mangle TCP and UDP GSO packets
PCI: hv: Properly handle PCI bus remove
PCI: hv: Lock PCI bus on device eject
ASoC: rcar: ssi: don't set SSICR.CKDV = 000 with SSIWSR.CONT
spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer
tcp: sysctl: Fix a race to avoid unexpected 0 window from space
dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
usb: dwc3: make sure UX_EXIT_PX is cleared
ARM: dts: bcm2835: add index to the ethernet alias
perf annotate: Fix a bug following symbolic link of a build-id file
perf buildid: Do not assume that readlink() returns a null terminated string
i40e/i40evf: Fix use after free in Rx cleanup path
scsi: be2iscsi: Check tag in beiscsi_mccq_compl_wait
driver: (adm1275) set the m,b and R coefficients correctly for power
bonding: make speed, duplex setting consistent with link state
mm: Fix false-positive VM_BUG_ON() in page_cache_{get,add}_speculative()
ALSA: firewire-lib: add a quirk of packet without valid EOH in CIP format
ARM: dts: r8a7794: Add DU1 clock to device tree
ARM: dts: r8a7794: Correct clock of DU1
ARM: dts: silk: Correct clock of DU1
blk-throttle: make sure expire time isn't too big
regulator: core: Limit propagation of parent voltage count and list
perf trace: Handle unpaired raw_syscalls:sys_exit event
f2fs: relax node version check for victim data in gc
drm/ttm: never add BO that failed to validate to the LRU list
bonding: refine bond_fold_stats() wrap detection
PCI: Apply Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
powerpc/mm/hugetlb: Filter out hugepage size not supported by page table layout
braille-console: Fix value returned by _braille_console_setup
drm/vmwgfx: Fixes to vmwgfx_fb
vxlan: vxlan dev should inherit lowerdev's gso_max_size
NFC: nfcmrvl: Include unaligned.h instead of access_ok.h
NFC: nfcmrvl: double free on error path
NFC: pn533: change order of free_irq and dev unregistration
ARM: dts: r7s72100: fix ethernet clock parent
ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks
ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks
ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks
powerpc: Avoid taking a data miss on every userspace instruction miss
net: hns: Correct HNS RSS key set function
net/faraday: Add missing include of of.h
qed: Fix TM block ILT allocation
rtmutex: Fix PI chain order integrity
printk: Correctly handle preemption in console_unlock()
drm: rcar-du: Handle event when disabling CRTCs
ARM: dts: koelsch: Correct clock frequency of X2 DU clock input
reiserfs: Make cancel_old_flush() reliable
ASoC: rt5677: Add OF device ID table
IB/hfi1: Check for QSFP presence before attempting reads
ALSA: firewire-digi00x: add support for console models of Digi00x series
ALSA: firewire-digi00x: handle all MIDI messages on streaming packets
fm10k: correctly check if interface is removed
EDAC, altera: Fix peripheral warnings for Cyclone5
scsi: ses: don't get power status of SES device slot on probe
qed: Correct MSI-x for storage
apparmor: Make path_max parameter readonly
iommu/iova: Fix underflow bug in __alloc_and_insert_iova_range
kvm/svm: Setup MCG_CAP on AMD properly
kvm: nVMX: Disallow userspace-injected exceptions in guest mode
video: ARM CLCD: fix dma allocation size
drm/radeon: Fail fb creation from imported dma-bufs.
drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)
drm/rockchip: vop: Enable pm domain before vop_initial
i40e: only register client on iWarp-capable devices
coresight: Fixes coresight DT parse to get correct output port ID.
lkdtm: turn off kcov for lkdtm_rodata_do_nothing:
tty: amba-pl011: Fix spurious TX interrupts
serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off
MIPS: BPF: Quit clobbering callee saved registers in JIT code.
MIPS: BPF: Fix multiple problems in JIT skb access helpers.
MIPS: r2-on-r6-emu: Fix BLEZL and BGTZL identification
MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters
v4l: vsp1: Prevent multiple streamon race commencing pipeline early
v4l: vsp1: Register pipe with output WPF
regulator: isl9305: fix array size
md/raid6: Fix anomily when recovering a single device in RAID6.
md.c:didn't unlock the mddev before return EINVAL in array_size_store
powerpc/nohash: Fix use of mmu_has_feature() in setup_initial_memory_limit()
usb: dwc2: Make sure we disconnect the gadget state
usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control()
perf evsel: Return exact sub event which failed with EPERM for wildcards
iwlwifi: mvm: fix RX SKB header size and align it properly
drivers/perf: arm_pmu: handle no platform_device
perf inject: Copy events when reordering events in pipe mode
net: fec: add phy-reset-gpios PROBE_DEFER check
perf session: Don't rely on evlist in pipe mode
vfio/powerpc/spapr_tce: Enforce IOMMU type compatibility check
vfio/spapr_tce: Check kzalloc() return when preregistering memory
scsi: sg: check for valid direction before starting the request
scsi: sg: close race condition in sg_remove_sfp_usercontext()
ALSA: hda: Add Geminilake id to SKL_PLUS
kprobes/x86: Fix kprobe-booster not to boost far call instructions
kprobes/x86: Set kprobes pages read-only
pwm: tegra: Increase precision in PWM rate calculation
clk: qcom: msm8996: Fix the vfe1 powerdomain name
Bluetooth: Avoid bt_accept_unlink() double unlinking
Bluetooth: 6lowpan: fix delay work init in add_peer_chan()
mac80211_hwsim: use per-interface power level
ath10k: fix compile time sanity check for CE4 buffer size
wil6210: fix protection against connections during reset
wil6210: fix memory access violation in wil_memcpy_from/toio_32
perf stat: Fix bug in handling events in error state
mwifiex: Fix invalid port issue
drm/edid: set ELD connector type in drm_edid_to_eld()
video/hdmi: Allow "empty" HDMI infoframes
HID: elo: clear BTN_LEFT mapping
iwlwifi: mvm: rs: don't override the rate history in the search cycle
clk: meson: gxbb: fix wrong clock for SARADC/SANA
ARM: dts: exynos: Correct Trats2 panel reset line
sched: Stop switched_to_rt() from sending IPIs to offline CPUs
sched: Stop resched_cpu() from sending IPIs to offline CPUs
test_firmware: fix setting old custom fw path back on exit
net: ieee802154: adf7242: Fix bug if defined DEBUG
net: xfrm: allow clearing socket xfrm policies.
mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()
net: thunderx: Set max queue count taking XDP_TX into account
ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
mtd: nand: ifc: update bufnum mask for ver >= 2.0.0
userns: Don't fail follow_automount based on s_user_ns
leds: pm8058: Silence pointer to integer size warning
power: supply: ab8500_charger: Fix an error handling path
power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()'
ath10k: update tdls teardown state to target
scsi: ses: don't ask for diagnostic pages repeatedly during probe
pwm: stmpe: Fix wrong register offset for hwpwm=2 case
clk: qcom: msm8916: fix mnd_width for codec_digcodec
mwifiex: cfg80211: do not change virtual interface during scan processing
ath10k: fix invalid STS_CAP_OFFSET_MASK
tools/usbip: fixes build with musl libc toolchain
spi: sun6i: disable/unprepare clocks on remove
bnxt_en: Don't print "Link speed -1 no longer supported" messages.
scsi: core: scsi_get_device_flags_keyed(): Always return device flags
scsi: devinfo: apply to HP XP the same flags as Hitachi VSP
scsi: dh: add new rdac devices
media: vsp1: Prevent suspending and resuming DRM pipelines
media: cpia2: Fix a couple off by one bugs
veth: set peer GSO values
drm/amdkfd: Fix memory leaks in kfd topology
powerpc/modules: Don't try to restore r2 after a sibling call
agp/intel: Flush all chipset writes after updating the GGTT
mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED
mac80211: remove BUG() when interface type is invalid
ASoC: nuc900: Fix a loop timeout test
ipvlan: add L2 check for packets arriving via virtual devices
rcutorture/configinit: Fix build directory error message
locking/locktorture: Fix num reader/writer corner cases
ima: relax requiring a file signature for new files with zero length
net: hns: Some checkpatch.pl script & warning fixes
x86/boot/32: Fix UP boot on Quark and possibly other platforms
x86/cpufeatures: Add Intel PCONFIG cpufeature
selftests/x86/entry_from_vm86: Exit with 1 if we fail
selftests/x86: Add tests for User-Mode Instruction Prevention
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86/entry_from_vm86: Add test cases for POPF
x86/vm86/32: Fix POPF emulation
x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels
x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
x86/mm: Fix vmalloc_fault to use pXd_large
parisc: Handle case where flush_cache_range is called with no context
ALSA: pcm: Fix UAF in snd_pcm_oss_get_formats()
ALSA: hda - Revert power_save option default value
ALSA: seq: Fix possible UAF in snd_seq_check_queue()
ALSA: seq: Clear client entry before deleting else at closing
drm/amdgpu: fix prime teardown order
drm/amdgpu/dce: Don't turn off DP sink when disconnected
fs: Teach path_connected to handle nfs filesystems with multiple roots.
lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
fs/aio: Add explicit RCU grace period when freeing kioctx
fs/aio: Use RCU accessors for kioctx_table->table[]
irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis
scsi: sg: fix SG_DXFER_FROM_DEV transfers
scsi: sg: fix static checker warning in sg_is_valid_dxfer
scsi: sg: only check for dxfer_len greater than 256M
btrfs: alloc_chunk: fix DUP stripe size handling
btrfs: Fix use-after-free when cleaning up fs_devs with a single stale device
scsi: qla2xxx: Fix extraneous ref on sp's after adapter break
USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
usb: dwc3: Fix GDBGFIFOSPACE_TYPE values
usb: gadget: bdc: 64-bit pointer capability check
Linux 4.9.89
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
||
|
Andy Lutomirski
|
403e064ebc |
selftests/x86/entry_from_vm86: Add test cases for POPF
commit 78393fdde2a456cafa414b171c90f26a3df98b20 upstream. POPF is currently broken -- add tests to catch the error. This results in: [RUN] POPF with VIP set and IF clear from vm86 mode [INFO] Exited vm86 mode due to STI [FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf) because POPF currently fails to check IF before reporting a pending interrupt. This patch also makes the FAIL message a bit more informative. Reported-by: Bart Oldeman <bartoldeman@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/a16270b5cfe7832d6d00c479d0f871066cbdb52b.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ricardo Neri
|
028c1fadf4 |
selftests/x86: Add tests for the STR and SLDT instructions
commit a9e017d5619eb371460c8e516f4684def62bef3a upstream. The STR and SLDT instructions are not valid when running on virtual-8086 mode and generate an invalid operand exception. These two instructions are protected by the Intel User-Mode Instruction Prevention (UMIP) security feature. In protected mode, if UMIP is enabled, these instructions generate a general protection fault if called from CPL > 0. Linux traps the general protection fault and emulates the instructions sgdt, sidt and smsw; but not str and sldt. These tests are added to verify that the emulation code does not emulate these two instructions but the expected invalid operand exception is seen. Tests fallback to exit with INT3 in case emulation does happen. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1509935277-22138-13-git-send-email-ricardo.neri-calderon@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ricardo Neri
|
497f33ae31 |
selftests/x86: Add tests for User-Mode Instruction Prevention
commit 9390afebe1d3f5a0be18b1afdd0ce09d67cebf9e upstream. Certain user space programs that run on virtual-8086 mode may utilize instructions protected by the User-Mode Instruction Prevention (UMIP) security feature present in new Intel processors: SGDT, SIDT and SMSW. In such a case, a general protection fault is issued if UMIP is enabled. When such a fault happens, the kernel traps it and emulates the results of these instructions with dummy values. The purpose of this new test is to verify whether the impacted instructions can be executed without causing such #GP. If no #GP exceptions occur, we expect to exit virtual-8086 mode from INT3. The instructions protected by UMIP are executed in representative use cases: a) displacement-only memory addressing b) register-indirect memory addressing c) results stored directly in operands Unfortunately, it is not possible to check the results against a set of expected values because no emulation will occur in systems that do not have the UMIP feature. Instead, results are printed for verification. A simple verification is done to ensure that results of all tests are identical. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1509935277-22138-12-git-send-email-ricardo.neri-calderon@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Andy Lutomirski
|
940bdec8b1 |
selftests/x86/entry_from_vm86: Exit with 1 if we fail
commit 327d53d005ca47b10eae940616ed11c569f75a9b upstream. Fix a logic error that caused the test to exit with 0 even if test cases failed. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bartoldeman@gmail.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/b1cc37144038958a469c8f70a5f47a6a5638636a.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
SeongJae Park
|
992cfe9506 |
rcutorture/configinit: Fix build directory error message
[ Upstream commit 2adfa4210f8f35cdfb4e08318cc06b99752964c2 ]
The 'configinit.sh' script checks the format of optional argument for the
build directory, printing an error message if the format is not valid.
However, the error message uses the wrong variable, indicating an empty
string even though the user entered a non-empty (but erroneous) string.
This commit fixes the script to use the correct variable.
Fixes:
|
||
|
Julien BOIBESSOT
|
c485b111e6 |
tools/usbip: fixes build with musl libc toolchain
[ Upstream commit 77be4c878c72e411ad22af96b6f81dd45c26450a ]
Indeed musl doesn't define old SIGCLD signal name but only new one SIGCHLD.
SIGCHLD is the new POSIX name for that signal so it doesn't change
anything on other libcs.
This fixes this kind of build error:
usbipd.c: In function ‘set_signal’:
usbipd.c:459:12: error: 'SIGCLD' undeclared (first use in this function)
sigaction(SIGCLD, &act, NULL);
^~~~~~
usbipd.c:459:12: note: each undeclared identifier is reported only once
for each function it appears in
Makefile:407: recipe for target 'usbipd.o' failed
make[3]: *** [usbipd.o] Error 1
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Luis R. Rodriguez
|
db699dcd8e |
test_firmware: fix setting old custom fw path back on exit
[ Upstream commit 65c79230576873b312c3599479c1e42355c9f349 ]
The file /sys/module/firmware_class/parameters/path can be used
to set a custom firmware path. The fw_filesystem.sh script creates
a temporary directory to add a test firmware file to be used during
testing, in order for this to work it uses the custom path syfs file
and it was supposed to reset back the file on execution exit. The
script failed to do this due to a typo, it was using OLD_PATH instead
of OLD_FWPATH, since its inception since v3.17.
Its not as easy to just keep the old setting, it turns out that
resetting an empty setting won't actually do what we want, we need
to check if it was empty and set an empty space.
Without this we end up having the temporary path always set after
we run these tests.
Fixes:
|
||
|
Stephane Eranian
|
46eae02ef6 |
perf stat: Fix bug in handling events in error state
[ Upstream commit db49a71798a38f3ddf3f3462703328dca39b1ac7 ] (This is a patch has been sitting in the Intel CQM/CMT driver series for a while, despite not depend on it. Sending it now independently since the series is being discarded.) When an event is in error state, read() returns 0 instead of sizeof() buffer. In certain modes, such as interval printing, ignoring the 0 return value may cause bogus count deltas to be computed and thus invalid results printed. This patch fixes this problem by modifying read_counters() to mark the event as not scaled (scaled = -1) to force the printout routine to show <NOT COUNTED>. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: David Carrillo-Cisneros <davidcc@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170412182301.44406-1-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
David Carrillo-Cisneros
|
4c885c3546 |
perf session: Don't rely on evlist in pipe mode
[ Upstream commit 0973ad97c187e06aece61f685b9c3b2d93290a73 ] Session sets a number parameters that rely on evlist. These parameters are not used in pipe-mode and should not be set, since evlist is unavailable. Fix that. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170410201432.24807-6-davidcc@google.com [ Check if file != NULL in perf_session__new(), like when used by builtin-top.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
David Carrillo-Cisneros
|
d9f8b1cc5a |
perf inject: Copy events when reordering events in pipe mode
[ Upstream commit 1e0d4f0200e4dbdfc38d818f329d8a0955f7c6f5 ] __perf_session__process_pipe_events reuses the same memory buffer to process all events in the pipe. When reordering is needed (e.g. -b option), events are not immediately flushed, but kept around until reordering is possible, causing memory corruption. The problem is usually observed by a "Unknown sample error" output. It can easily be reproduced by: perf record -o - noploop | perf inject -b > output Committer testing: Before: $ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null stress: info: [8297] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd stress: info: [8297] successful run completed in 2s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] Warning: Found 1 unknown events! Is this an older tool processing a perf.data file generated by a more recent tool? If that is not the case, consider reporting to linux-kernel@vger.kernel.org. $ After: $ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null stress: info: [9027] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd stress: info: [9027] successful run completed in 2s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] no symbols found in /usr/bin/stress, maybe install a debug package? no symbols found in /usr/bin/stress, maybe install a debug package? $ Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170410201432.24807-3-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jin Yao
|
02db6c7024 |
perf evsel: Return exact sub event which failed with EPERM for wildcards
[ Upstream commit 32ccb130f5325abc81b32b1a538390f46e4860f6 ]
The kernel has a special check for a specific irq_vectors trace event.
TRACE_EVENT_PERF_PERM(irq_work_exit,
is_sampling_event(p_event) ? -EPERM : 0);
The perf-record fails for this irq_vectors event when it is present,
like when using a wildcard:
root@skl:/tmp# perf record -a -e irq_vectors:* sleep 2
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
which controls use of the performance events system by
unprivileged users (without CAP_SYS_ADMIN).
The current value is 2:
-1: Allow use of (almost) all events by all users
>= 0: Disallow raw tracepoint access by users without CAP_IOC_LOCK
>= 1: Disallow CPU event access by users without CAP_SYS_ADMIN
>= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN
To make this setting permanent, edit /etc/sysctl.conf too, e.g.:
kernel.perf_event_paranoid = -1
This patch prints out the exact sub event that failed with EPERM for
wildcards to help in understanding what went wrong when this event is
present:
After the patch:
root@skl:/tmp# perf record -a -e irq_vectors:* sleep 2
Error:
No permission to enable irq_vectors:irq_work_exit event.
You may not have permission to collect system-wide stats.
......
Committer notes:
So we have a lot of irq_vectors events:
[root@jouet ~]# perf list irq_vectors:*
List of pre-defined events (to be used in -e):
irq_vectors:call_function_entry [Tracepoint event]
irq_vectors:call_function_exit [Tracepoint event]
irq_vectors:call_function_single_entry [Tracepoint event]
irq_vectors:call_function_single_exit [Tracepoint event]
irq_vectors:deferred_error_apic_entry [Tracepoint event]
irq_vectors:deferred_error_apic_exit [Tracepoint event]
irq_vectors:error_apic_entry [Tracepoint event]
irq_vectors:error_apic_exit [Tracepoint event]
irq_vectors:irq_work_entry [Tracepoint event]
irq_vectors:irq_work_exit [Tracepoint event]
irq_vectors:local_timer_entry [Tracepoint event]
irq_vectors:local_timer_exit [Tracepoint event]
irq_vectors:reschedule_entry [Tracepoint event]
irq_vectors:reschedule_exit [Tracepoint event]
irq_vectors:spurious_apic_entry [Tracepoint event]
irq_vectors:spurious_apic_exit [Tracepoint event]
irq_vectors:thermal_apic_entry [Tracepoint event]
irq_vectors:thermal_apic_exit [Tracepoint event]
irq_vectors:threshold_apic_entry [Tracepoint event]
irq_vectors:threshold_apic_exit [Tracepoint event]
irq_vectors:x86_platform_ipi_entry [Tracepoint event]
irq_vectors:x86_platform_ipi_exit [Tracepoint event]
#
And some may be sampled:
[root@jouet ~]# perf record -e irq_vectors:local* sleep 20s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (2 samples) ]
[root@jouet ~]# perf report -D | egrep 'stats:|events:'
Aggregated stats:
TOTAL events: 155
MMAP events: 144
COMM events: 2
EXIT events: 1
SAMPLE events: 2
MMAP2 events: 4
FINISHED_ROUND events: 1
TIME_CONV events: 1
irq_vectors:local_timer_entry stats:
TOTAL events: 1
SAMPLE events: 1
irq_vectors:local_timer_exit stats:
TOTAL events: 1
SAMPLE events: 1
[root@jouet ~]#
But, as shown in the tracepoint definition at the start of this message,
some, like "irq_vectors:irq_work_exit", may not be sampled, just counted,
i.e. if we try to sample, as when using 'perf record', we get an error:
[root@jouet ~]# perf record -e irq_vectors:irq_work_exit
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
<SNIP>
The error message is misleading, this patch will help in pointing out
what is the event causing such an error, but the error message needs
improvement, i.e. we need to figure out a way to check if a tracepoint
is counting only, like this one, when all we can do is to count it with
'perf stat', at most printing the delta using interval printing, as in:
[root@jouet ~]# perf stat -I 5000 -e irq_vectors:irq_work_*
# time counts unit events
5.000168871 0 irq_vectors:irq_work_entry
5.000168871 0 irq_vectors:irq_work_exit
10.000676730 0 irq_vectors:irq_work_entry
10.000676730 0 irq_vectors:irq_work_exit
15.001122415 0 irq_vectors:irq_work_entry
15.001122415 0 irq_vectors:irq_work_exit
20.001298051 0 irq_vectors:irq_work_entry
20.001298051 0 irq_vectors:irq_work_exit
25.001485020 1 irq_vectors:irq_work_entry
25.001485020 1 irq_vectors:irq_work_exit
30.001658706 0 irq_vectors:irq_work_entry
30.001658706 0 irq_vectors:irq_work_exit
^C 32.045711878 0 irq_vectors:irq_work_entry
32.045711878 0 irq_vectors:irq_work_exit
[root@jouet ~]#
But at least, when we use a wildcard, this patch helps a bit.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1491566932-503-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|