misc lil cleanups (#582)

* cleanup apt hook * Move VERSION into rootfs overlay * Use broad rootfs overlay copy
2026-08-23 17:23:54 +08:00 · 2026-05-03 15:21:42 -07:00
parent 0a44f0683f
commit a765dc1759
62 changed files with 13 additions and 14 deletions
@@ -1,5 +1,10 @@
 #!/bin/bash -e

+# Skip while Docker is assembling the image.
+if [ -f /.dockerenv ]; then
+  exit 0
+fi
+
 sudo mount -o rw,remount /
 sudo resize2fs $(findmnt -n -o SOURCE /) &>/dev/null || sudo resize2fs $(findmnt -n -o SOURCE /)
 sudo mount -o remount,size=1500M /var
@@ -1,3 +1,8 @@
 #!/bin/bash

+# Skip while Docker is assembling the image.
+if [ -f /.dockerenv ]; then
+  exit 0
+fi
+
 sudo mount -o ro,remount / || true
@@ -0,0 +1 @@
+/firmware/image
@@ -0,0 +1,484 @@
+# This file allows user to override the factory
+# defaults for the WLAN Driver
+
+# Enable IMPS or not
+gEnableImps=1
+
+# Enable BMPS or not
+gEnableBmps=1
+
+# Phy Mode (auto, b, g, n, etc)
+# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
+# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
+# 7 = 11b only 8 = 11ac only.
+gDot11Mode=0
+
+# Assigned MAC Addresses - This will be used until NV items are in place
+# Each byte of MAC address is represented in Hex format as XX
+Intf0MacAddress=000AF58989FF
+Intf1MacAddress=000AF58989FE
+Intf2MacAddress=000AF58989FD
+Intf3MacAddress=000AF58989FC
+
+# UAPSD service interval for VO,VI, BE, BK traffic
+InfraUapsdVoSrvIntv=0
+InfraUapsdViSrvIntv=0
+InfraUapsdBeSrvIntv=0
+InfraUapsdBkSrvIntv=0
+
+# Flag to allow STA send AddTspec even when ACM is Off
+gAddTSWhenACMIsOff=1
+
+#Flag to enable HostARPOffload feature or not
+hostArpOffload=1
+
+#Flag to enable HostNSOffload feature or not
+hostNSOffload=1
+
+# 802.11n Protection flag
+gEnableApProt=1
+
+#Enable OBSS protection
+gEnableApOBSSProt=1
+
+#Enable/Disable UAPSD for SoftAP
+gEnableApUapsd=1
+
+# Fixed Rate
+gFixedRate=0
+
+# Maximum Tx power
+# gTxPowerCap=30
+
+# Fragmentation Threshold
+# gFragmentationThreshold=2346
+
+# RTS threshold
+RTSThreshold=1048576
+
+# Intra-BSS forward
+gDisableIntraBssFwd=0
+
+# WMM Enable/Disable
+WmmIsEnabled=0
+
+# 802.11d support
+g11dSupportEnabled=1
+gCountrycode=CN
+
+# 802.11h support
+g11hSupportEnabled=1
+
+# DFS Master Capability
+gEnableDFSMasterCap=1
+
+# ESE Support and fast transition
+EseEnabled=0
+
+ImplicitQosIsEnabled=0
+
+gNeighborLookupThreshold=76
+gNeighborScanChannelMinTime=20
+gNeighborScanChannelMaxTime=30
+gMaxNeighborReqTries=3
+
+# Legacy (non-ESE, non-802.11r) Fast Roaming Support
+# To enable, set FastRoamEnabled=1
+# To disable, set FastRoamEnabled=0
+FastRoamEnabled=1
+
+# Check if the AP to which we are roaming is better than current AP in
+# terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
+# use this value as to how better the RSSI of the new/roamable AP should
+# be for roaming
+RoamRssiDiff=3
+
+# To enable, set gRoamIntraBand=1 (Roaming within band)
+# To disable, set gRoamIntraBand=0 (Roaming across band)
+gRoamIntraBand=0
+
+# RSSI threshold offset for 2G to 5G roam
+roam_bad_rssi_thresh_offset_2g=0
+
+#Short Guard Interval Enable/disable
+gShortGI20Mhz=1
+gShortGI40Mhz=1
+
+#Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
+gAPAutoShutOff=0
+
+#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
+gWlanAutoShutdown = 0
+
+# Not used.
+gApAutoChannelSelection=0
+
+#Preferred band (both or 2.4 only or 5 only)
+BandCapability=0
+
+#Channel Bonding
+gChannelBondingMode5GHz=1
+
+#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
+#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
+#is idle for last 10 seconds.) For both active and power save clients.
+
+#Power save clients: DUT set TIM bit from 10th second onwards and till client
+#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
+
+#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
+#success still we try on 11th second if not tries on 12th and so on till 15th
+#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
+#case DUT will detect client got removed in (10+5) seconds.
+#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
+
+#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
+#it is period where we send NULL frame.
+#gApLinkMonitorPeriod = 10
+#gGoLinkMonitorPeriod = 10
+
+#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
+#are succeed to send or not. Hence total effective detection time is
+# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
+# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
+gGoKeepAlivePeriod = 20
+gApKeepAlivePeriod = 20
+
+#If set will start with active scan after driver load, otherwise will start with
+#passive scan to find out the domain
+gEnableBypass11d=1
+
+#If set to 0, will not scan DFS channels
+gEnableDFSChnlScan=1
+
+# Enable DFS channel roam
+# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
+gAllowDFSChannelRoam=1
+
+gVhtChannelWidth=2
+
+#Data Inactivity Timeout when in powersave (in ms)
+gDataInactivityTimeout=200
+
+# Set txchainmask and rxchainmask
+# These parameters are used only if gEnable2x2 is 0
+# Valid values are 1,2
+# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
+# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
+gSetTxChainmask1x1=1
+gSetRxChainmask1x1=1
+
+# Scan Timing Parameters
+# gPassiveMaxChannelTime=110
+# gPassiveMinChannelTime=60
+gActiveMaxChannelTime=40
+gActiveMinChannelTime=20
+
+#If set to 0, MCC is not allowed.
+gEnableMCCMode=1
+
+# MCC to SCC Switch mode:
+# 0-Disable
+# 1-Enable
+# 2-Force SCC if same band, with SAP restart
+# 3-Force SCC if same band, without SAP restart by sending (E)CSA
+# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
+#   without SAP restart by sending (E)CSA
+gWlanMccToSccSwitchMode = 3
+
+# 1=enable STBC; 0=disable STBC
+gEnableRXSTBC=1
+
+# 1=enable tx STBC; 0=disable
+gEnableTXSTBC=1
+
+# 1=enable rx LDPC; 0=disable
+gEnableRXLDPC=1
+
+#Enable/Disable Tx beamforming
+gTxBFEnable=1
+
+#Enable/Disable Tx beamformee in SAP mode
+gEnableTxBFeeSAP=1
+
+# Enable Tx beamforming in VHT20MHz
+# Valid values are 0,1. If commented out, the default value is 0.
+# 0=disable, 1=enable
+gEnableTxBFin20MHz=1
+
+#Enable/Disable SU Tx beamformer support.
+gEnableTxSUBeamformer=1
+
+gEnableFastRoamInConcurrency=1
+
+#Maxium Channel time in msec
+gMaxMediumTime = 6000
+
+# 802.11K support
+gRrmEnable=1
+
+#Enable Power Save offload
+gEnablePowerSaveOffload=2
+
+#Enable firmware uart print
+gEnablefwprint=0
+
+# Firmware log mode
+# Valid values are 0,1,2
+# 0=Disable, 1=WMI, 2=DIAG
+gEnablefwlog=1
+
+# Maximum Receive AMPDU size (VHT only. Valid values:
+# 0->8k 1->16k 2->32k 3->64k 4->128k)
+gVhtAmpduLenExponent=7
+
+# Maximum MPDU length (VHT only. Valid values:
+# 0->3895 octets, 1->7991 octets, 2->11454 octets)
+gVhtMpduLen=2
+
+# Maximum number of wow filters required
+#gMaxWoWFilters=22
+
+# WOW Enable/Disable.
+# 0 - Disable both magic pattern match and pattern byte match.
+# 1 - Enable magic pattern match on all interfaces.
+# 2 - Enable pattern byte match on all interfaces.
+# 3 - Enable both magic pattern and pattern byte match on all interfaces.
+# Default value of gEnableWoW is 3.
+# gEnableWoW=0
+
+# Enable or Disable MCC Adaptive Scheduler at the FW
+# 1=Enable (default), 0=Disable
+gEnableMCCAdaptiveScheduler=1
+
+#Enable or Disable p2p device address administered
+isP2pDeviceAddrAdministrated=0
+
+# Set Thermal Power limit
+TxPower2g=10
+TxPower5g=10
+
+# Remove Overlap channel restriction
+gEnableOverLapCh=0
+
+#Enable VHT on 2.4Ghz
+gEnableVhtFor24GHzBand=1
+
+#Maximum number of offload peers supported
+# gMaxOffloadPeers=2
+
+# controlling the following offload patterns
+# through ini parameter. Default value is 1
+# to disable set it to zero. ssdp = 0
+# Setup multicast pattern for mDNS 224.0.0.251,
+# SSDP 239.255.255.250 and LLMNR 224.0.0.252
+ssdp=0
+
+#Enable Memory Deep Sleep
+gEnableMemDeepSleep=1
+
+# Regulatory Setting; 0=STRICT; 1=CUSTOM
+gRegulatoryChangeCountry=1
+
+# RA filtering rate limit param, the current value would not
+# help if the lifetime in RA is less than 3*60=3min. Then
+# we need to change it, though it is uncommon.
+# gRAFilterEnable=0
+gRArateLimitInterval=600
+
+# Maximum number of concurrent connections
+gMaxConcurrentActiveSessions=3
+
+# Disable/Enable GreenAP
+# 0 to disable, 1 to enable, default: 1
+gEnableGreenAp=0
+
+# Radar PRI multiplier
+gDFSradarMappingPriMultiplier=4
+
+gPNOScanSupport=1
+
+#Enable/Disable LPASS support
+# 0 to disable, 1 to enable
+gEnableLpassSupport=1
+
+# Whether userspace country code setting shld have priority
+gCountryCodePriority=1
+
+# Enable(1)/Disable(0) SIFS burst
+gEnableSifsBurst=1
+
+# Enable or Disable Multi-user MIMO
+# 1=Enable (default), 0=Disable
+gEnableMuBformee=1
+
+# Enable/Disable channel avoidance for SAP in SCC scenario
+# 0 - disable
+# 1 - enable
+gSapSccChanAvoidance=0
+
+# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
+gIbssTxSpEndInactivityTime=10
+
+# Enable support for TDLS
+#  0 - disable
+#  1 - enable
+gEnableTDLSSupport=1
+
+# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
+# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
+# and RSSI) is met and then will initiate teardown when teardown criteria
+# (idle packet count and RSSI) is met.
+#  0 - disable
+#  1 - enable
+gEnableTDLSImplicitTrigger=1
+
+# Enable TDLS External Control. That is, user space application has to
+# first configure a peer MAC in wlan driver towards which TDLS is desired.
+# Device will establish TDLS only towards those configured peers whenever
+# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
+# when teardown criteria (idle packet count and RSSI) is met. However,
+# device will accept TDLS connection if it is initiated from any other peer,
+# even if that peer is not configured.
+#  0 - disable
+#  1 - enable
+# For TDLS External Control, Implicit Trigger must also be enabled.
+gTDLSExternalControl=1
+
+# Enable support for TDLS off-channel operation
+#  0 - disable
+#  1 - enable
+# TDLS off-channel operation will be invoked when there is only one
+# TDLS connection.
+gEnableTDLSOffChannel=1
+
+# Enable or Disable Random MAC (Spoofing)
+# 1=Enable, 0=Disable (default)
+gEnableMacAddrSpoof=1
+
+################ Datapath feature set Begin ################
+# Bus bandwidth threshold values in terms of number of packets
+gBusBandwidthHighThreshold=2000
+gBusBandwidthMediumThreshold=500
+gBusBandwidthLowThreshold=150
+
+# Bus bandwidth compute timeout value in ms
+gBusBandwidthComputeInterval=100
+
+# VHT Tx/Rx MCS values
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gVhtRxMCS=2
+gVhtTxMCS=2
+
+# VHT Tx/Rx MCS values for 2x2
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gEnable2x2=1
+gVhtRxMCS2x2=2
+gVhtTxMCS2x2=2
+
+#IPA config is a bit mask and following are the configurations.
+#bit0 IPA Enable
+#bit1 IPA PRE Filter enable
+#bit2 IPv6 enable
+#bit3 IPA Resource Manager (RM) enable
+#bit4 IPA Clock scaling enable
+#bit5 IPA uC ENABLE
+#bit6 IPA uC STA ENABLE
+#bit8 IPA Real Time Debugging
+#gIPAConfig=0x7d
+gIPAConfig=0
+gIPADescSize=800
+
+# Enable/Disable RX full reorder offload
+gReorderOffloadSupported=1
+
+# Enable CE classification
+# 1 - enable(default)  0 - disable
+gCEClassifyEnable=1
+
+# Enable Rx handling options
+# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
+rx_mode=5
+
+# Enable(Tx) fastpath for data traffic.
+# 1 - enable(default)  0 - disable
+gEnableFastPath=1
+
+# This flag enables IP, TCP and UDP checksum offload
+# 1 - enable(default)  0 - disable
+gEnableIpTcpUdpChecksumOffload=1
+
+# Enable TCP Segmentation Offload
+# 1 - enable  0 - disable
+TSOEnable=1
+
+# Enable Generic Receive Offload
+# LRO and GRO are exclusive to each other
+# LRO support is deprecated on latest 4.9(SDM845) kernel
+GROEnable=1
+
+# Enable HT MPDU Density
+# 4 for 2 micro sec
+ght_mpdu_density=4
+
+# Enable flow steering to enable multiple CEs for Rx flows.
+# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
+# Parallel Rx paths.
+# 1 - enable 0 - disable(default)
+gEnableFlowSteering=1
+
+# Time in microseconds after which a NAPI poll must yield
+ce_service_max_yield_time=500
+
+#Maximum number of HTT messages to be processed per NAPI poll
+ce_service_max_rx_ind_flush=1
+
+# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
+maxMSDUsPerRxInd=8
+################ Datapath feature set End ################
+
+################ NAN feature set start ###################
+
+# Enable NAN discovery (NAN 1.0)
+# 1 - enable  0 - disable(default)
+gEnableNanSupport=1
+genable_nan_datapath=1
+################ NAN feature set end #####################
+
+adaptive_dwell_mode_enabled=1
+
+hostscan_adaptive_dwell_mode=1
+
+adapt_dwell_lpf_weight=80
+
+adapt_dwell_wifi_act_threshold=10
+
+# Enable/Disable DTIM Synth
+# 1- Enable DTIM Synth
+# 0- Disable DTIM Synth
+gEnableLPRx=0
+
+#############################################
+# MAWC related configurations
+#############################################
+
+# MAWCEnabled - Enable/Disable Motion Aided Wireless Connectivity Global
+MAWCEnabled=0
+
+# mawc_roam_enabled - Enable/Disable MAWC during roaming
+mawc_roam_enabled=0
+
+# Enable/Disable the Motion Aided Wireless Connectivity
+# based NLO using this parameter
+mawc_nlo_enabled=0
+
+END
+
+# Note: Configuration parser would not read anything past the END marker
+
+qdf_trace_enable_hdd=255
+qdf_trace_enable_sme=255
+qdf_trace_enable_pe=255
+qdf_trace_enable_wma=255
@@ -0,0 +1,5 @@
+[Path]
+PathModified=/data/params/d/AdbEnabled
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,10 @@
+[Unit]
+Description=ADB param watcher
+After=network.target
+
+[Service]
+Type=oneshot
+ExecStart=/usr/comma/set_adb.sh
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,6 @@
+[Unit]
+Description=adbd Service
+
+[Service]
+User=root
+ExecStart=/usr/comma/adbd
@@ -0,0 +1,10 @@
+[Unit]
+After=local-fs.target
+
+[Service]
+Type=oneshot
+User=comma
+ExecStart=/usr/comma/debug.py
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,16 @@
+[Unit]
+Description=Publish comma SSH service via Avahi
+After=avahi-daemon.service network.target
+Requires=avahi-daemon.service 
+Wants=network.target
+StartLimitIntervalSec=0
+
+[Service]
+Type=simple
+ExecStart=/usr/comma/avahi-publish-service.sh
+Restart=always
+RestartSec=5
+User=comma
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,9 @@
+[Unit]
+Description=Limit display brightness with uptime
+
+[Service]
+Restart=on-failure
+ExecStart=/usr/local/venv/bin/python -u /usr/comma/brightnessd.py
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,16 @@
+[Unit]
+After=local-fs.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=true
+User=comma
+ExecStart=/bin/bash -c "/usr/bin/tmux new-session -s comma -d /usr/comma/comma.sh"
+# TODO: send SIGTERM first, then kill after a timeout
+ExecStop=/bin/bash -c "/usr/bin/tmux kill-session -t comma"
+TimeoutStopSec=1
+LimitRTPRIO=100
+LimitNICE=-10
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,11 @@
+[Unit]
+Description=Setup rootfs
+Before=local-fs.target
+DefaultDependencies=no
+
+[Service]
+Type=oneshot
+ExecStart=/usr/comma/fs_setup.sh
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,9 @@
+[Unit]
+Description=GPIO export
+
+[Service]
+Type=oneshot
+ExecStart=/usr/comma/gpio.sh
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,10 @@
+[Unit]
+Description=QCOM init
+After=sysinit.target
+
+[Service]
+Type=oneshot
+ExecStart=/usr/comma/init.qcom.sh
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,39 @@
+# Copyright (c) 2016, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#   * Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above
+#     copyright notice, this list of conditions and the following
+#     disclaimer in the documentation and/or other materials provided
+#     with the distribution.
+#   * Neither the name of The Linux Foundation nor the names of its
+#     contributors may be used to endorse or promote products derived
+#     from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+[Unit]
+SourcePath=/sbin/init_mss
+Description=Modem Init Service
+After=firmware-mount.service
+
+[Service]
+Restart=on-failure
+RemainAfterExit=yes
+ExecStart=/sbin/init_mss
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,12 @@
+[Unit]
+SourcePath=/sbin/leprop-service
+Description=leprop Service
+After=systemrw-build.prop.service
+Before=persist-prop.service
+
+[Service]
+Restart=always
+ExecStart=/sbin/leprop-service
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,41 @@
+# Copyright (c) 2016, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#   * Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above
+#     copyright notice, this list of conditions and the following
+#     disclaimer in the documentation and/or other materials provided
+#     with the distribution.
+#   * Neither the name of The Linux Foundation nor the names of its
+#     contributors may be used to endorse or promote products derived
+#     from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
+
+
+[Unit]
+SourcePath=/etc/initscripts/logd
+Description=logd Service
+
+[Service]
+Type=forking
+Restart=no
+IgnoreSIGPIPE=no
+KillMode=process
+GuessMainPID=no
+RemainAfterExit=yes
+ExecStart=/etc/initscripts/logd start
+ExecStop=/etc/initscripts/logd stop
@@ -0,0 +1,11 @@
+[Unit]
+Description=Hourly rotation of log files
+Documentation=man:logrotate(8) man:logrotate.conf(5)
+
+[Timer]
+Unit=logrotate.service
+OnCalendar=hourly
+Persistent=true
+
+[Install]
+WantedBy=timers.target
@@ -0,0 +1,13 @@
+[Unit]
+Description=LTE
+After=gpio.service network.target
+
+[Service]
+Restart=no
+KillSignal=SIGKILL
+RemainAfterExit=true
+ExecStart=/usr/comma/lte/lte.sh start
+ExecStop=/usr/comma/lte/lte.sh stop
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,18 @@
+[Unit]
+Description=Magic
+
+[Service]
+Type=simple
+User=comma
+PermissionsStartOnly=true
+ExecStartPre=/bin/bash -c "chgrp gpu /dev/ion /dev/kgsl-3d0"
+ExecStartPre=/bin/bash -c "chmod 660 /dev/ion /dev/kgsl-3d0"
+
+ExecStartPre=/bin/bash -c "mkdir -p /data/misc/display || true"
+ExecStartPre=/bin/bash -c "echo 0 > /data/misc/display/sdm_dbg_cfg.txt || true"
+ExecStartPre=/bin/bash -c "echo 0 > /data/misc/display/gbm_dbg_cfg.txt || true"
+
+ExecStart=/bin/bash -c "source /etc/profile && /usr/local/venv/bin/python -u /usr/comma/magic.py"
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1 @@
+/lib/systemd/system/init_sys_mss.service
@@ -0,0 +1 @@
+/lib/systemd/system/leprop.service
@@ -0,0 +1 @@
+/lib/systemd/system/logd.service
@@ -0,0 +1 @@
+/lib/systemd/system/persist-prop.service
@@ -0,0 +1 @@
+/lib/systemd/system/rmt_storage.service
@@ -0,0 +1,11 @@
+[Unit]
+Description=persist-prop service
+After=leprop.service
+Requires=leprop.service
+
+[Service]
+ExecStart=/sbin/persist-prop.sh
+Type=oneshot
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,10 @@
+[Unit]
+After=multi-user.target
+
+[Service]
+Restart=always
+ExecCondition=/bin/bash -c 'grep -q -E "tici|tizi" /sys/firmware/devicetree/base/model'
+ExecStart=/usr/local/venv/bin/python -u /usr/comma/power_drop_monitor.py
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,9 @@
+[Unit]
+After=multi-user.target
+
+[Service]
+Restart=always
+ExecStart=/usr/local/venv/bin/python -u /usr/comma/power_monitor.py
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,12 @@
+[Unit]
+Description= Remote Storage Service
+SourcePath=/sbin/rmt_storage
+Before=init_sys_mss.service
+
+[Service]
+Restart=always
+ExecStartPre=/bin/bash -c "/usr/comma/wait_for_file.sh /dev/block/bootdevice/by-name/modemst1; /usr/comma/wait_for_file.sh /dev/block/bootdevice/by-name/modemst2; /usr/comma/wait_for_file.sh /dev/block/bootdevice/by-name/fsc; /usr/comma/wait_for_file.sh /dev/block/bootdevice/by-name/fsg"
+ExecStart=/sbin/rmt_storage
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,11 @@
+[Unit]
+After=multi-user.target
+Description=Set screen calibration
+
+[Service]
+Type=oneshot
+User=root
+ExecStart=/usr/comma/screen_calibration.py
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,4 @@
+# With Ubuntu 24.04 (systemd 255) and 4.9 Kernel, the console is not properly 
+# hung up when the serial getty for ttyMSM0 is started. Force hangup with this.
+[Service]
+ExecStartPre=/bin/stty -F /dev/ttyMSM0 hupcl
@@ -0,0 +1,12 @@
+[Unit]
+Description=Sets the hostname to the device's serial number
+After=basic.target
+Before=network.target
+
+[Service]
+User=root
+Type=oneshot
+ExecStart=/usr/comma/set-hostname.sh
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,9 @@
+[Unit]
+Description=Sound
+
+[Service]
+Type=oneshot
+ExecStart=/usr/comma/sound/sound_init.sh
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,5 @@
+[Path]
+PathModified=/data/params/d/SshEnabled
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,10 @@
+[Unit]
+Description=SSH param watcher
+After=network.target
+
+[Service]
+Type=oneshot
+ExecStart=/usr/comma/set_ssh.sh
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,5 @@
+[Service]
+ExecStartPre=
+ExecStartPre=/bin/mkdir -p /data/etc/ssh/
+ExecStartPre=/usr/bin/ssh-keygen -A -f /data
+ExecStartPre=/usr/sbin/sshd -t
@@ -0,0 +1,9 @@
+[Unit]
+After=multi-user.target
+
+[Service]
+Restart=always
+ExecStart=/usr/local/venv/bin/python -u /usr/comma/varwatch.py
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,34 @@
+#!/bin/sh
+# Copyright (c) 2017, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+#       copyright notice, this list of conditions and the following
+#       disclaimer in the documentation and/or other materials provided
+#       with the distribution.
+#     * Neither the name of The Linux Foundation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# persist-prop      init.d script to start persist properties usage
+#
+
+# Start using persist properties
+while [ ! -e /dev/socket/leprop-service ] ; do sleep 0.01; done
+setprop le.persistprop.enable true