StarPilot/panda/board/flasher.h

#pragma once

// from the linker script
#define APP_START_ADDRESS 0x8020000U

// flasher state variables
uint32_t *prog_ptr = NULL;
bool unlocked = false;

int comms_control_handler(ControlPacket_t *req, uint8_t *resp) {
  int resp_len = 0;

  // flasher machine
  memset(resp, 0, 4);
  memcpy(resp+4, "\xde\xad\xd0\x0d", 4);
  resp[0] = 0xff;
  resp[2] = req->request;
  resp[3] = ~req->request;
  *((uint32_t **)&resp[8]) = prog_ptr;
  resp_len = 0xc;

  int sec;
  switch (req->request) {
    // **** 0xb0: flasher echo
    case 0xb0:
      resp[1] = 0xff;
      break;
    // **** 0xb1: unlock flash
    case 0xb1:
      if (flash_is_locked()) {
        flash_unlock();
        resp[1] = 0xff;
      }
      led_set(LED_GREEN, 1);
      unlocked = true;
      prog_ptr = (uint32_t *)APP_START_ADDRESS;
      break;
    // **** 0xb2: erase sector
    case 0xb2:
      sec = req->param1;
      if (flash_erase_sector(sec, unlocked)) {
        resp[1] = 0xff;
      }
      break;
    // **** 0xc1: get hardware type
    case 0xc1:
      resp[0] = hw_type;
      resp_len = 1;
      break;
    // **** 0xc3: fetch MCU UID
    case 0xc3:
      (void)memcpy(resp, ((uint8_t *)UID_BASE), 12);
      resp_len = 12;
      break;
    // **** 0xd0: fetch serial number
    case 0xd0:
      // addresses are OTP
      if (req->param1 == 1) {
        memcpy(resp, (void *)DEVICE_SERIAL_NUMBER_ADDRESS, 0x10);
        resp_len = 0x10;
      } else {
        get_provision_chunk(resp);
        resp_len = PROVISION_CHUNK_LEN;
      }
      break;
    // **** 0xd1: enter bootloader mode
    case 0xd1:
      // this allows reflashing of the bootstub
      switch (req->param1) {
        case 0:
          print("-> entering bootloader\n");
          enter_bootloader_mode = ENTER_BOOTLOADER_MAGIC;
          NVIC_SystemReset();
          break;
        case 1:
          print("-> entering softloader\n");
          enter_bootloader_mode = ENTER_SOFTLOADER_MAGIC;
          NVIC_SystemReset();
          break;
      }
      break;
    // **** 0xd6: get version
    case 0xd6:
      COMPILE_TIME_ASSERT(sizeof(gitversion) <= USBPACKET_MAX_SIZE);
      memcpy(resp, gitversion, sizeof(gitversion));
      resp_len = sizeof(gitversion) - 1U;
      break;
    // **** 0xd8: reset ST
    case 0xd8:
      flush_write_buffer();
      NVIC_SystemReset();
      break;
  }
  return resp_len;
}

void comms_can_write(const uint8_t *data, uint32_t len) {
  UNUSED(data);
  UNUSED(len);
}

int comms_can_read(uint8_t *data, uint32_t max_len) {
  UNUSED(data);
  UNUSED(max_len);
  return 0;
}

void refresh_can_tx_slots_available(void) {}

void comms_endpoint2_write(const uint8_t *data, uint32_t len) {
  led_set(LED_RED, 0);
  for (uint32_t i = 0; i < len/4; i++) {
    flash_write_word(prog_ptr, *(uint32_t*)(data+(i*4)));

    //*(uint64_t*)(&spi_tx_buf[0x30+(i*4)]) = *prog_ptr;
    prog_ptr++;
  }
  led_set(LED_RED, 1);
}


void soft_flasher_start(void) {
  print("\n\n\n************************ FLASHER START ************************\n");
  print("MCU UID: "); hexdump((const uint8_t *)UID_BASE, 12);

  enter_bootloader_mode = 0;

  flasher_peripherals_init();

  gpio_usb_init();
  led_init();

  // enable comms
  usb_init();
  if (current_board->has_spi) {
    gpio_spi_init();
    spi_init();
  }

  // green LED on for flashing
  led_set(LED_GREEN, 1);

  enable_interrupts();

  for (;;) {
    // blink the green LED fast
    led_set(LED_GREEN, 0);
    delay(500000);
    led_set(LED_GREEN, 1);
    delay(500000);
  }
}