* wip torqued
* add basic logic
* setup in manager
* check sanity and publish msg
* add first order filter to outputs
* wire up controlsd, and update gains
* rename intercept to offset
* add cloudlog, live values are not updated
* fix bugs, do not reset points for now
* fix crashes
* rename to main
* fix bugs, works offline
* fix float in cereal bug
* add latacc filter
* randomly choose points, approx for iid
* add variable decay
* local param to capnp instead of dict
* verify works in replay
* use torqued output in controlsd
* use in controlsd; use points from past routes
* controlsd bugfix
* filter before updating gains, needs to be replaced
* save all points to ensure smooth transition across routes, revert friction factor to 1.5
* add filters to prevent noisy low-speed data points; improve fit sanity
* add engaged buffer
* revert lat_acc thresh
* use paramsd realtime process config
* make latacc-to-torque generic, and overrideable
* move freq to 4Hz, avoid storing in np.array, don't publish points in the message
* float instead of np
* remove constant while storing pts
* rename slope, offset to lat_accet_factor, offset
* resolve issues
* use camelcase in all capnp params
* use camelcase everywhere
* reduce latacc threshold or sanity, add car_sane todo, save points properly
* add and check tag
* write param to disk at end of route
* remove args
* rebase op, cereal
* save on exit
* restore default handler
* cpu usage check
* add to process replay
* handle reset better, reduce unnecessary computation
* always publish raw values - useful for debug
* regen routes
* update refs
* checks on cache restore
* check tuning vals too
* clean that up
* reduce cpu usage
* reduce cpu usage by 75%
* cleanup
* optimize further
* handle reset condition better, don't put points in init, use only in corolla
* bump cereal after rebasing
* update refs
* Update common/params.cc
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* remove unnecessary checks
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 4fa62f146426f76c9c1c2867d9729b33ec612b59
* push
* do process replay
* commit
* update refs
* clean up
* clean up controlsd
* clean up controlsd
* Add assert
* debubuggier param name
* can be peristent
* Revert "can be peristent"
This reverts commit 6e6d3f6423c26a202623cef728e038259e9e46cd.
* Update selfdrive/test/process_replay/process_replay.py
old-commit-hash: 87ca42e993f1cc96cc313e33b3c538143e0a737c
* Don't set lane change events if we're not able to steer.
* more specific variable name
* update process replay socket config
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 5b1ba4f1357ac7f385ee47c78b38cfb81bef42ab
* tolerances per field in replay
* refactor
* Remove laikad parameters
* Small comment change
old-commit-hash: 4d7b7483d70a61cf0fb938107df55c24f27da1b0
* process replay: ensure enabled for significant amount of time
* update refs
* 10s is reasonable
old-commit-hash: 2ae52e9b2218c23d4c80b36fb0b50387b6ecdd8f
* Use clocks msg to for first fetch of orbits. Which is sent earlier than ublox msgs
* refactor last_fetch_orbits
* Add comment.
Add test
* increase timeout
* Add clocks to process replay
old-commit-hash: eaf7eb42784732136e52cd031035e9c5ab520e6e
* fix camera malfunction
* revert
* send in one process to fix frames out of sync
* not used
* revert
* fix and add --no-upload for CI testing
* fingerprint if source is fw
* no FW versions
old-commit-hash: 5dce006a82879f133ab69355b6c9b8c74d2b4d33
* ACC on if enabled != 0
* small regen clean up and add HONDA3
* fixes
* revert unneeded changes
* not used
* just alt exp
Co-authored-by: redacid95 <jonathanc.olivier@gmail.com>
old-commit-hash: b86ef0b70e81ef4e895d5102feb231dc3d43265f
* regen and process replay clean up
* test_fuzzy actually uses fingerprint hardcoding
fix
* revert
* revert
* this can be a url or path so just print full variable
old-commit-hash: 170ed3d761a58222a626c86b9706f9be4900d058
* get log
* simplify two nonsense
* not needed
* libyuv is a joke
* clean up
* try small
* fast but not bad
* working
* clean up driverview
* simplified
* thats mirrored
* smol
* tweak
* ref is screen
* w/ ee
* update camera model
* no if TICI
* start
* update pose thresh
* less cpu more dsp
* new libyuv
* new snpe
* add files
* test
* should be fast
* update out len
* trigger test
* use master snpe
* add cereal
* update cereal
* refactor parsing
* missing ;
* get
* wrong type
* test model
* use driver data
* 10829278-72fe-4283-a118-2cef959ce174/1550
* no pf
* adapt driverview
* ;
* rhd learner
* update libyuv buildi x64
* ad4337ea
* remove blink slack
* test
* no
* use toggle
* b16
* fix for nv12
* 5b02cff5 both
* update test
* update cereal
* update cereal
* update cereal
* v2 packets
* revert libyuv
* no /
* update snpemodel
* ;
* memcpy
* fix test
* use toggle in driverview
* update power
* update replay
* Revert "update replay"
This reverts commit 1d0979ca59dbc89bc5890656e9501e83f0556d50.
* update model ref
* halve cpu
* fake 8bit onnx runner
* same thresh as report
* cereal master
Co-authored-by: Comma Device <device@comma.ai>
old-commit-hash: d6c07a6b158595c1ab10256dc6eee4fbdf902379
* simulator: support running wide camera only
* proper frame id
* use param name that makes more sense
* do some cleanup
* Update tools/sim/bridge.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: b5aed2bf6781cd4d74d28f6f44d24737ec08f0db
* test failure()
* let's just change a tune here
* debug
revert
* debug
* use current commit, not ref_commit
fix
* need to figure out better place for this
* quick test
* test without upload
* temp
* use azure token
* fixes
* shouldn't need this
* debug
* debug
* not getting anything?
* does this mean nothing gets envvars?
* add azure token to docker environment variables
* quote
* move back
* clean up a bit
* more clean up
* like this sorting better
* replace flags with CI and clean up
* test FULL_TEST and minimalize diff a bit
* now test all
* revert tests comments
* remove flags
* revert this
revert this
* now make it fail
* now update ref_commit to last commit (make sure we can re-start this test if we commit before last one finishes uploading)
* fix
fix
fix
fix
* bad commit
* why is it not throwing an exception?
* debug
* URLFile returns empty bytes if using cache and remote file doesn't exist
* we always need to download anyway
* debug...
* duh, wrong file. but neither should have it
* add that back and just check explicitly
* check both
* clean up and make a diff
* stylize
* see if this is a better diff on files changed
* update refs
* revert changes
* only for owners or members
* if we have token access
* if we have token access
* if we have token access
* move up
* clean up
* revert
* move update refs to test_processes
* clean up
* update messages
* update msg
* update README and delete update_refs
* this isn't possible to reach anymore
* fix readme
* better help message
better help message
better help message
* only show basename when uploading, only if failed to find
* test diff
* fix printing old ref commit
* change to using
* update refs
* Revert "update refs"
This reverts commit 2e352a736a6de68e2c7064daa4e2e9409ce77686.
* revert
* ref refers to reference commit/logs, cur refers to current logs/commit (future ref)
* like for better
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Update selfdrive/test/process_replay/test_processes.py
* every time lol
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: d2d3b7b823bac0d24e2136f7a97c3aa4c6d9ae47
* check if regenerated route is enabled
* elif
* initialize CUDA runner before all other processes
* Revert "initialize CUDA runner before all other processes"
This reverts commit 124e3dd4d3408b6649f40b3e6e7f217ca347f59f.
* add back fixes
* fix typo
old-commit-hash: 1a5ddfaedd40d07db31a84f31e76bd5f684e3fd9
* hacks to make process replay engage again
* dont change that
* enable engagement check again
* chmod +x
* first working regen
* proper logMonoTime
* fix video framerate consistency
* mpc is valid again
* proper alive checks
* revert loggerd change
* ensure engaged in regen, fix managerState, peripheralState
* ubloxRaw is unused
* add submaster config for gm
* regen all services we can run without HW
* fix loggerd
* loggerd: matroska without the extension
* update ref
old-commit-hash: d3d10e014a69f77d3f67c8d01100b03fde8ab034
Updated Python code with Python 3.6+ features:
- utf-8 encoding is now the default (PEP 3120)
- Replace list comprehensions by Generator Expressions (PEP 289)
- Replace yield loop by yield from (PEP 380)
- Remove the (object) subclass when defining a class
- Replace the IOError alias by OSError (PEP 3151)
- Define sets with curly braces {} instead of set()
- Remove "r" parameter from open function, which is default
Co-Authored-By: Adeeb Shihadeh <8762862+adeebshihadeh@users.noreply.github.com>
Co-Authored-By: GregorKikelj <96022003+GregorKikelj@users.noreply.github.com>
Co-authored-by: Adeeb Shihadeh <8762862+adeebshihadeh@users.noreply.github.com>
Co-authored-by: GregorKikelj <96022003+GregorKikelj@users.noreply.github.com>
old-commit-hash: 332f568a8241fba9459cb70c76840b9670e6993a
* Make long planning triggered on model
* fix process replay
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: efb5abec41e349e4a8a667b96f6265825f75a2ce
* add script to rerun process on route and generate new logs
* cleanup
* move to root
* newline
old-commit-hash: 3b13eb8c7de713d2dcd18fb3a731a6529d66aa82
* add TSS2 replay route
* skip on sim
* do not set on import time
* update ref
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: 86f68ff22ed184dc40bfe58761a554aea1e3995e
Shane Smiskol