* ban all of common & copy numpy_fast
* add numpy_fast
* these are okay
* and ban controls
* better name
* Conversions
* do utils, kalman
* clean up
* sorting
* don't forget
old-commit-hash: 8d961a12e5b033855f2abf5d8bd9c51374f74c6e
* Reapply "selfdrive/car: ban imports from external modules" (#32993)
This reverts commit 626d78ec548fe19acfdf3c2c3e063fac3b257dc6.
* controls will just use controls
* also these
* ignore
old-commit-hash: d684d8f0f6900d80a2a1618099b0b8e19e6492a2
Revert "selfdrive/car: ban imports from external modules (#32973)"
This reverts commit c1e8ff2dbc47ccb07fb41a4e88bfb66af2669254.
old-commit-hash: 35a4a773f1ff6c7b171b7acdb2fd4a65279edebd
* format card
* standalone process
* no class member CS, there's no point
also can be confusing; what else could be using this?
* rename CoS
* Update selfdrive/controls/controlsd.py
* never works first time :D
* canRcvTimeout is bool
* hack
* add cpu
* see what testing closet comes up with
* first
* some clean up
* support passable CI, fix test models
* fix startup alert
* process replay changes
* test_fuzzy
* gate carOutput valid on carControl valid
* we should publish after we update carOutput
* controlsd was using actuatorsOutput from 2 frames ago for torque, not the most up to date
* check all checks for carControl in case controlsd dies
* log more timestamps
* more generic latency logger; needs some clean up
latency_logger.py was difficult to understand and modify
* card polls on can and carControl to get latest carControl possible
* temp try to send earlier
* add log
* remove latencylogger
* no mpld3!
* old loop
* detect first event
* normal send
* revert "card polls on can and carControl to get latest carControl possible"
how it was is best
* sheesh! update should be first
* first timestamp
* temp comment ( timestamp is slow :( )
* more final ordering, and make polling on/off test repeatable
* Received can
* new plot timestamps
* clean up
* no poll
* add controllers (draft)
* Revert "add controllers (draft)"
This reverts commit e2c3f01b2fadcff74347bac90c8a5cc1ef4e27b3.
* fix that
* conventions
* just use CS
* consider controlsd state machine in card: not fully done
* hmm it's just becoming controlsd
* rm debugging
* Revert "hmm it's just becoming controlsd"
This reverts commit 534a357ee95bec4ed070667186af55d59421bbc7.
* Revert "just use CS"
This reverts commit 9fa7406f30c86200f20457f7b9ff95e731201bf9.
* add vCruise
* migrate car state
* Revert "migrate car state"
This reverts commit 4ae86ca163c6920070f410f608f7644ab632850b.
* Revert "add vCruise"
This reverts commit af247a8da41c3626ada4231b98042da1a1ae4633.
* simple state machine in card (doesn't work as is)
* Revert "simple state machine in card (doesn't work as is)"
This reverts commit b4af8a9b0a2e17fdfc89d344c64678ef51305c24.
* poll carState without conflate
* bump
* remove state transition
* fix
* update refs
* ignore cumLagMs and don't ignore valid
* fix controls mismatch; controlsd used to set alt exp
* controlsd_config_callback not needed for card
* revert ref temp
* update refs
* no poll
* not builder!
* test fix
* need to migrate initialized
* CC will be a reader
* more as_reader!
* fix None
* init after publish like before - no real difference
* controlsd clean up
* remove redundant check and check passive for init
* stash
* flip
* migrate missing carOutput for controlsd
* Update ref_commit
* bump cereal
* comment
* no class params
* no class
* Revert "no class"
This reverts commit 5499b83c2dcb5462070626f8523e3aec6f4c209d.
* add todo
* regen and update refs
* fix
* update refs
* and fix that
* should be controlsstate
* remove controlsState migration
CoS.initialized isn't needed yet
* fix
* flip!
* bump
* fix that
* update refs
* fix
* if canValid goes false, controlsd would still send
* bump
* rm diff
* need to be very careful with initializing
* update refs
old-commit-hash: 71f5c441fe32184d94a9f26565a36c661e2ccf28
* rename function
* make a wrapper function (ford uses dynamic up/down limits
* make two functions consistent
* make torque function convert to int
old-commit-hash: 581fd62d2642629b23ac111112245a963202143f
* draft
* bump opendbc
* still draft
* that's not right
* superset of the changes, 33hz
* cleanup
* this should work
* remove line
* pass it in again
* actually no need to check updated now
* now_nanos
* consistent name
* fix replay
* one line isn't that bad
switch
switch
* fix CarController tests
* Update ref_commit
old-commit-hash: 8f5057ff2dbea4ebc85bc8f55bc7a37e4d5969b6
* hopefully easier to understand?
* space
* no confusing elif, move comment to relevant part
* better
old-commit-hash: 5b9f2c3fcd09409211f518b9074afa046a1915d6
* Reliable relay open
* Reliable relay close
* ign in a loop
* fixes
* we need this
* log
* comment to remind me tmrw
* ign fix
* this makes it 2x more reliable, but messyyy
* Revert "this makes it 2x more reliable, but messyyy"
This reverts commit 03401dc4a705cfacbe5a7048d95dccb6fa80d57f.
* revert non-related stuff
* comments, spaces
* a stands for indefinite article
* not applicable for non-camera acc
* something...
* Revert "something..."
This reverts commit de8a158488efd5ef257434fbc3c55aefff800cb7.
* Update ref_commit
old-commit-hash: 022ef679e6d67f0be82ddc19b595bc874d456138
* stash
* more test
* less test
* clean test
* no angle
* add tolerance
* fix gm
fix gm
* test both
* lower some rates on hkg
* stash
* simpler
* bump panda
* Revert "bump panda"
This reverts commit f2137c221145cca723fe6ee3378ba947b7061965.
* only torque
* make kona pass
* duplicate __init__
* move
* half clean up
* half clean up
* more clean up
* more clean up
* fix static analysis
* calculate over 0.5 seconds
* limit to max steer
* type annotation
* calc once
old-commit-hash: aab33b1c5f56eb7ef66f1128c98d45d5340ebc60
* put gm camera voacc behind disable radar toggle
* bump panda
* bump panda
* bump panda
* experimental long
* fixes
* car control notes and fixes for Bolt EUV
* might enable stop and go
* consistent name
* min enable speed seems to be around 5 kph
* camera acc can engage under 5 kph if stopped
* comment
* comment
* remove this for now
* only real brake
* comments
* update max brake
* bump
* clean up/fix
* same if
* simplify
* fix
* old comment
* no brake_pressed
* temporary fault fix
* tune longitudinal
* update docs
* bump panda
* GM camera ACC cars have no regen in ACC
* cleaner
* cleaner
* fix
* set max gas
* fixes
* fix LKAS unavailable warning from camera
* only camera
* bump panda
* bump panda
* bump panda
* bump panda
* clean up gmcan
* clean up CC
* flip
* rm
* rm comment
* clean up
* custom starting/stopping probably not needed
* Update selfdrive/car/gm/carcontroller.py
* fix crash
* long tuning
* we need long control state to resume
* CAMERA_ACC_CAR not needed
* no interp on accel
* tuning
* formatting
* formatting
* formatting
* formatting
* formatting
* no need to init ccp
* makes more sense now
old-commit-hash: 2fb7b4ffad204901033273f6f92f289bbce19f06
* send at 10hz when inactive
* try to make it fine to switch rates
* fix rate
* todododo
* fine if we skip, we usually send too early
* clean up
* this may be required, 50Hz is not really needed to sync/initialize
* preserves previous behavior (not sure if this makes sense)
* Revert "preserves previous behavior (not sure if this makes sense)"
This reverts commit 3b297bca72307b5cba09bec4e2cd8e0f2761af42.
* Revert "this may be required, 50Hz is not really needed to sync/initialize"
This reverts commit a6b4693814214d3f508db922f3b371c402a13995.
* rm com
* Update ref_commit
* gate behind GM Cam
* common logic
* bet
* update refs
old-commit-hash: 27e315e58f5273da79803ad95737fc15483fef21
* add delay to GM camera ACC cancel to avoid FCW and cruise fault
* we can revert brake pressed threshold now
* bump panda
* add proper threshold
* bump
* bujmp panda
old-commit-hash: 6efd2c3de3d5b2955f3e7ab5c93701e94ac25537
* add all signals
* try to forward this PSCMStatus
* fixes
* see if this works
* modify checksum when bit flipped
* bump opendbc
* so i can test without restarting
* bump
* bump panda
* clean up
* comment
* also fix this
* bump
* bump
* every 5 seconds
* only send our values
* fix
* try sending everything again (+1 counter)
* revert
* revert, forward msg
* forward
* fix that
* bump panda
* bump panda
* fine to not copy
* after cancel, pass bus
* fix
* Revert "fine to not copy"
This reverts commit 654ac1a7dad4f7b9b0a3de52768522fb60cc55bd.
old-commit-hash: 63d552cafc6e4728cfe097e7a3f8e3f5cd98a566
* GM camera ACC: no faults on start up 2.0
And by 2.0 I mean we don't need to wait for blocked msg support to be merged first to merge this without regressing accidental single blocked msg count handling.
* Send the camera counter + 1
* Keep updating the first counter until we get a message on the bus
* Only update right before sending so sent_lka_steering_cmd is updated first
* Update ref_commit
old-commit-hash: 0f94d81b7adffa9da5c4632fb5979b27695bbb53
* Switch to ECMPRDNL2 for GM gear
* Removing manumatic gear #
* values.py almost complete
* Silverado and Bolt EUV val and CP
* GM controller updated
* Cam hrns supp done (in theory)
* cleanup for new cars
* Remove extra constant
* WS, etc cleanup
* removing the unused
* Fix kpBP typo
* Updated docs
* Skip's PIF tune
* Dropped LKA CAN error patch
* Add silverado sigmoid ff
* CAN Err & LKA latch patch
* Remove EPS fault fix (another PR)
* Remove Silverado (another PR)
* clean up some common params
* Remove Escalade FP
Remove Escalade FP
* comment
* Premier is just a trim
Premier is just a trim
Premier is just a trim
* no footnote: new Bolt is like most other cars, older GM were outliers not at the camera
* clean up
clean up
* bump panda
* bump panda
* bump panda
* bump panda
* bump panda
* remove comments
* try spamming buttons on bus 2
* bump panda
* bumping opendbc w btn rc
* not needed for this port
This reverts commit 6af1f0ba799e075f877d7acc8ca0f117d97da361.
* add button safety
* Send next rc when spamming btns
* forward other signals in message
* missing DriveModeButton
* fill cruiseState.speed
* see if resume works without counter
* try the whole message
* send immediately and at 10Hz
* no resume, back to just button signal
* even holding random buttons it cancels
* Use torque controller with base tune
* stock long GM don't auto-resume yet
* Testing GM zero min steer speed
* Revert latcontrol
* revert opendbc
* latActive is basically lkas_enabled
* Update Bolt torque params
* comment
* clean up
* Add to releases
* Add test route
* Don't specify segment
* bump panda
* bump panda
* no harness for Bolt just yet
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* We support all and 2023
* move safetyParam up to first cam check
* Bump panda and update docs
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 4ffe9e68db8d752d9da45febccfe4c28a6e8a0f9
* GM: separate EV/ICE gas/brake lookup tables
* removed blank line
* V are the same
* comment
better ordering
comment
comment
* Add some delay for the laggy brakes
Add some delay for the laggy brakes
* move actuator to only acadia
* start braking at 0 m/s/s
* Revert "start braking at 0 m/s/s"
This reverts commit 55c1dee733aab3dc037fb1705c9bd0ace55c849f.
* add delay for escalade
* revert EV changes
* Update selfdrive/car/gm/carcontroller.py
* comment
* only ACADIA
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 2a4020da60b9c383efa75a5ffb54df3bc10756a0
* do VW
* Do the rest
* unused
* ford cc formatting
* final clean ups
* also just return update output
old-commit-hash: d2c2154a32db0876036f4f6b61b912de0c90fc5a
* Interface radarOffCan set, comments
* pass pcmCruise value to common events
* add transType and networkLoc to iface
* carstate use transtype to detect EV
* ctrl: limit sends by config
* Add clarifying comments for new vals
* clean up
* comment on new line
* these have the same frequency
* remove 25hz
* add to upper comment
* update refs
* update refs
* move into same block
move into same block
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 9279c02258e7ab2f60b4e5ea0198bdcb757bf533
* these should be enabled
* bump panda
* bump
* allow in pre-enabled state
* bump panda
* add comment
* bump and update refs
* bump panda
* bump panda
old-commit-hash: 0f61a388c394ad5b6f25446c1e76558c1f4cead7
* do tesla
* parentheses
* Do Chrysler
* Make sure Hyundai long never actuates when long inactive
.
* clean up Hyundai
* more clear
* formatting
* Stock sets these to zero
* fix params
* move jerk logic into CC
clean up
old-commit-hash: c8f5b217443036333bc18c29085a1c8ae8bd39f3
* proof of concept
* actuators packet describes which actuators are active
* bump cereal
* fixes
* not needed for this PR
* Do Toyota
* add back controlsState.active
* bump cereal
* rest of cars
* in actuators
* add active back
* which
* use controlsState.active for now
* will make an issue
* Update selfdrive/controls/controlsd.py
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* move local lat_active checks into CC.latActive
* remove redundant checks
* move comment
move comment
* fix joystick mode
* get enabled from carcontrol
* do standstill check in controlsd
* make sure we consider the gas press case for GM
* use CC.actuators
* fix
* capitalization
* Bump cereal
Bump cereal
* make intermediate actuators
* similar convention to before
* clean that up
* update refs
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 629399a44925080b2c35b6dde35c093cc2e32035
* check in tuple instead of list
* Update selfdrive/car/toyota/carcontroller.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* Update selfdrive/car/mazda/interface.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: a653461dec18b1313148905172ba54bac9f5fdfd
* retune civic
* seems smooth
* back to normal
* new ref
* fix conflict
* runs
* rm
* accel scale is 4
* toyota should be good
* more cleanup
* fixup
* better naming
* update ref
* deprecated
* sending brake when not enable causes a fault
* rm gas and brake
* unused
* update ref
* acura logic is no more
* wrong before
* revert tuning cleanup
* adress comments
* update ref
* already on master
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: 1ac89f14aa7c45c56049e8dbb0d6c5bb83a0fc6b
* Emit correct alerts for LDW Left & Right on Subarus
This change switches the ldw event to use VisualAlert.ldw and
alters all cars to use the prior behaviour for that alert, except
global subarus - they emit the correct warning to the dash
* Remove whitespace, and add comment about not overwriting stock alerts
Co-authored-by: Crispin Flowerday <crispin@theflowerdays.com>
old-commit-hash: 7458e143e3c0123a95680b0b2db6c7a1f94405fa
Shane Smiskol