diff --git a/frogpilot/ui/qt/offroad/frogpilot_settings.cc b/frogpilot/ui/qt/offroad/frogpilot_settings.cc
index 2ce9a4e1d..cdca5fa06 100644
--- a/frogpilot/ui/qt/offroad/frogpilot_settings.cc
+++ b/frogpilot/ui/qt/offroad/frogpilot_settings.cc
@@ -284,7 +284,7 @@ void FrogPilotSettingsWindow::updateVariables() {
     longitudinalActuatorDelay = CP.getLongitudinalActuatorDelay();
     startAccel = CP.getStartAccel();
     steerActuatorDelay = CP.getSteerActuatorDelay();
-    steerKp = CP.getLateralTuning().which() == cereal::CarParams::LateralTuning::PID ? CP.getLateralTuning().getPid().getKpV()[0] : 0.6;
+    steerKp = CP.getLateralTuning().which() == cereal::CarParams::LateralTuning::PID ? CP.getLateralTuning().getPid().getKpV()[0] : 1.0;
     steerRatio = CP.getSteerRatio();
     stopAccel = CP.getStopAccel();
     stoppingDecelRate = CP.getStoppingDecelRate();
diff --git a/selfdrive/car/card.py b/selfdrive/car/card.py
index bf43487da..636f28956 100644
--- a/selfdrive/car/card.py
+++ b/selfdrive/car/card.py
@@ -30,7 +30,7 @@ class Car:
 
   def __init__(self, CI=None):
     self.can_sock = messaging.sub_sock('can', timeout=20)
-    self.sm = messaging.SubMaster(['pandaStates', 'carControl', 'liveCalibration', 'onroadEvents', 'frogpilotOnroadEvents', 'frogpilotPlan'])
+    self.sm = messaging.SubMaster(['pandaStates', 'carControl', 'controlsState', 'liveCalibration', 'onroadEvents', 'frogpilotOnroadEvents', 'frogpilotPlan'])
     self.pm = messaging.PubMaster(['sendcan', 'carState', 'carParams', 'carOutput', 'frogpilotCarState'])
 
     self.can_rcv_cum_timeout_counter = 0
diff --git a/selfdrive/controls/lib/latcontrol_torque.py b/selfdrive/controls/lib/latcontrol_torque.py
index fa6bf76b3..4e8b62bac 100644
--- a/selfdrive/controls/lib/latcontrol_torque.py
+++ b/selfdrive/controls/lib/latcontrol_torque.py
@@ -21,15 +21,17 @@ from openpilot.selfdrive.controls.lib.vehicle_model import ACCELERATION_DUE_TO_G
 # Additionally, there is friction in the steering wheel that needs
 # to be overcome to move it at all, this is compensated for too.
 
-KP = 0.6
-KI = 0.3
-KD = 0.0
+KP = 1.0
+KI = 0.1
+KD = 0.3
 INTERP_SPEEDS = [1, 1.5, 2.0, 3.0, 5, 7.5, 10, 15, 30]
 KP_INTERP = [250, 120, 65, 30, 11.5, 5.5, 3.5, 2.0, KP]
 
 LP_FILTER_CUTOFF_HZ = 1.2
+JERK_LOOKAHEAD_SECONDS = 0.19
+JERK_GAIN = 0.3
 LAT_ACCEL_REQUEST_BUFFER_SECONDS = 1.0
-VERSION = 0
+VERSION = 1
 
 class LatControlTorque(LatControl):
   def __init__(self, CP, CI, dt):
@@ -40,10 +42,12 @@ class LatControlTorque(LatControl):
     self.pid = PIDController([INTERP_SPEEDS, KP_INTERP], KI, KD, rate=1/self.dt)
     self.update_limits()
     self.steering_angle_deadzone_deg = self.torque_params.steeringAngleDeadzoneDeg
+    self.lookahead_frames = int(JERK_LOOKAHEAD_SECONDS / self.dt)
     self.lat_accel_request_buffer_len = int(LAT_ACCEL_REQUEST_BUFFER_SECONDS / self.dt)
     self.lat_accel_request_buffer = deque([0.] * self.lat_accel_request_buffer_len , maxlen=self.lat_accel_request_buffer_len)
-    self.previous_measurement = 0.0
+    self.jerk_filter = FirstOrderFilter(0.0, 1 / (2 * np.pi * LP_FILTER_CUTOFF_HZ), self.dt)
     self.measurement_rate_filter = FirstOrderFilter(0.0, 1 / (2 * np.pi * LP_FILTER_CUTOFF_HZ), self.dt)
+    self.previous_measurement = 0.0
 
   def update_live_torque_params(self, latAccelFactor, latAccelOffset, friction):
     self.torque_params.latAccelFactor = latAccelFactor
@@ -69,17 +73,18 @@ class LatControlTorque(LatControl):
 
       delay_frames = int(np.clip(lat_delay / self.dt, 1, self.lat_accel_request_buffer_len))
       expected_lateral_accel = self.lat_accel_request_buffer[-delay_frames]
-      # TODO factor out lateral jerk from error to later replace it with delay independent alternative
+      lookahead_idx = int(np.clip(-delay_frames + self.lookahead_frames, -self.lat_accel_request_buffer_len+1, -2))
+      raw_lateral_jerk = (self.lat_accel_request_buffer[lookahead_idx+1] - self.lat_accel_request_buffer[lookahead_idx-1]) / (2 * self.dt)
+      desired_lateral_jerk = self.jerk_filter.update(raw_lateral_jerk)
       future_desired_lateral_accel = desired_curvature * CS.vEgo ** 2
       self.lat_accel_request_buffer.append(future_desired_lateral_accel)
       gravity_adjusted_future_lateral_accel = future_desired_lateral_accel - roll_compensation
-      desired_lateral_jerk = (future_desired_lateral_accel - expected_lateral_accel) / lat_delay
+      setpoint = expected_lateral_accel
 
       measurement = measured_curvature * CS.vEgo ** 2
       measurement_rate = self.measurement_rate_filter.update((measurement - self.previous_measurement) / self.dt)
       self.previous_measurement = measurement
 
-      setpoint = lat_delay * desired_lateral_jerk + expected_lateral_accel
       error = setpoint - measurement
 
       # do error correction in lateral acceleration space, convert at end to handle non-linear torque responses correctly
@@ -87,15 +92,10 @@ class LatControlTorque(LatControl):
       ff = gravity_adjusted_future_lateral_accel
       # latAccelOffset corrects roll compensation bias from device roll misalignment relative to car roll
       ff -= self.torque_params.latAccelOffset
-      # TODO jerk is weighted by lat_delay for legacy reasons, but should be made independent of it
-      ff += get_friction(error, lateral_accel_deadzone, FRICTION_THRESHOLD, self.torque_params)
+      ff += get_friction(error + JERK_GAIN * desired_lateral_jerk, lateral_accel_deadzone, FRICTION_THRESHOLD, self.torque_params)
 
       freeze_integrator = steer_limited_by_safety or CS.steeringPressed or CS.vEgo < 5
-      output_lataccel = self.pid.update(pid_log.error,
-                                       -measurement_rate,
-                                        feedforward=ff,
-                                        speed=CS.vEgo,
-                                        freeze_integrator=freeze_integrator)
+      output_lataccel = self.pid.update(pid_log.error, -measurement_rate, CS.vEgo, ff, freeze_integrator)
       output_torque = self.torque_from_lateral_accel(output_lataccel, self.torque_params)
 
       pid_log.active = True