[bot] Update Python packages (#36966)

* Update Python packages

* ty fixes

---------

Co-authored-by: Vehicle Researcher <user@comma.ai>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>

selfdrive/debug/car/hyundai_enable_radar_points.py

@@ -101,11 +101,11 @@ if __name__ == "__main__":
   uds_client = UdsClient(panda, 0x7D0, bus=args.bus)
 
   print("\n[START DIAGNOSTIC SESSION]")
-  session_type : SESSION_TYPE = 0x07 # type: ignore
+  session_type : SESSION_TYPE = 0x07
   uds_client.diagnostic_session_control(session_type)
 
   print("[HARDWARE/SOFTWARE VERSION]")
-  fw_version_data_id : DATA_IDENTIFIER_TYPE = 0xf100 # type: ignore
+  fw_version_data_id : DATA_IDENTIFIER_TYPE = 0xf100
   fw_version = uds_client.read_data_by_identifier(fw_version_data_id)
   print(fw_version)
   if fw_version not in SUPPORTED_FW_VERSIONS.keys():
@@ -113,7 +113,7 @@ if __name__ == "__main__":
     sys.exit(1)
 
   print("[GET CONFIGURATION]")
-  config_data_id : DATA_IDENTIFIER_TYPE = 0x0142 # type: ignore
+  config_data_id : DATA_IDENTIFIER_TYPE = 0x0142
   current_config = uds_client.read_data_by_identifier(config_data_id)
   config_values = SUPPORTED_FW_VERSIONS[fw_version]
   new_config = config_values.default_config if args.default else config_values.tracks_enabled

selfdrive/debug/car/vw_mqb_config.py

@@ -55,7 +55,7 @@ if __name__ == "__main__":
     sw_ver = uds_client.read_data_by_identifier(DATA_IDENTIFIER_TYPE.VEHICLE_MANUFACTURER_ECU_SOFTWARE_VERSION_NUMBER).decode("utf-8")
     component = uds_client.read_data_by_identifier(DATA_IDENTIFIER_TYPE.SYSTEM_NAME_OR_ENGINE_TYPE).decode("utf-8")
     odx_file = uds_client.read_data_by_identifier(DATA_IDENTIFIER_TYPE.ODX_FILE).decode("utf-8").rstrip('\x00')
-    current_coding = uds_client.read_data_by_identifier(VOLKSWAGEN_DATA_IDENTIFIER_TYPE.CODING)  # type: ignore
+    current_coding = uds_client.read_data_by_identifier(VOLKSWAGEN_DATA_IDENTIFIER_TYPE.CODING)
     coding_text = current_coding.hex()
 
     print("\nEPS diagnostic data\n")
@@ -126,9 +126,9 @@ if __name__ == "__main__":
     new_coding = current_coding[0:coding_byte] + new_byte.to_bytes(1, "little") + current_coding[coding_byte+1:]
 
     try:
-      seed = uds_client.security_access(ACCESS_TYPE_LEVEL_1.REQUEST_SEED)  # type: ignore
+      seed = uds_client.security_access(ACCESS_TYPE_LEVEL_1.REQUEST_SEED)
       key = struct.unpack("!I", seed)[0] + 28183  # yeah, it's like that
-      uds_client.security_access(ACCESS_TYPE_LEVEL_1.SEND_KEY, struct.pack("!I", key))  # type: ignore
+      uds_client.security_access(ACCESS_TYPE_LEVEL_1.SEND_KEY, struct.pack("!I", key))
     except (NegativeResponseError, MessageTimeoutError):
       print("Security access failed!")
       print("Open the hood and retry (disables the \"diagnostic firewall\" on newer vehicles)")
@@ -148,7 +148,7 @@ if __name__ == "__main__":
       uds_client.write_data_by_identifier(DATA_IDENTIFIER_TYPE.PROGRAMMING_DATE, prog_date)
       tester_num = uds_client.read_data_by_identifier(DATA_IDENTIFIER_TYPE.CALIBRATION_REPAIR_SHOP_CODE_OR_CALIBRATION_EQUIPMENT_SERIAL_NUMBER)
       uds_client.write_data_by_identifier(DATA_IDENTIFIER_TYPE.REPAIR_SHOP_CODE_OR_TESTER_SERIAL_NUMBER, tester_num)
-      uds_client.write_data_by_identifier(VOLKSWAGEN_DATA_IDENTIFIER_TYPE.CODING, new_coding)  # type: ignore
+      uds_client.write_data_by_identifier(VOLKSWAGEN_DATA_IDENTIFIER_TYPE.CODING, new_coding)
     except (NegativeResponseError, MessageTimeoutError):
       print("Writing new configuration failed!")
       print("Make sure the comma processes are stopped: tmux kill-session -t comma")
@@ -156,7 +156,7 @@ if __name__ == "__main__":
 
     try:
       # Read back result just to make 100% sure everything worked
-      current_coding_text = uds_client.read_data_by_identifier(VOLKSWAGEN_DATA_IDENTIFIER_TYPE.CODING).hex()  # type: ignore
+      current_coding_text = uds_client.read_data_by_identifier(VOLKSWAGEN_DATA_IDENTIFIER_TYPE.CODING).hex()
       print(f"   New coding:   {current_coding_text}")
     except (NegativeResponseError, MessageTimeoutError):
       print("Reading back updated coding failed!")

selfdrive/debug/cpu_usage_stat.py

@@ -1,5 +1,4 @@
 #!/usr/bin/env python3
-# type: ignore
 '''
 System tools like top/htop can only show current cpu usage values, so I write this script to do statistics jobs.
   Features:

selfdrive/debug/fuzz_fw_fingerprint.py

@@ -1,5 +1,4 @@
 #!/usr/bin/env python3
-# type: ignore
 import random
 from collections import defaultdict
 

selfdrive/debug/measure_torque_time_to_max.py

@@ -1,5 +1,4 @@
 #!/usr/bin/env python3
-# type: ignore
 
 import os
 import argparse

selfdrive/debug/test_fw_query_on_routes.py

@@ -1,5 +1,4 @@
 #!/usr/bin/env python3
-# type: ignore
 
 from collections import defaultdict
 import argparse