diff --git a/cereal/car.capnp b/cereal/car.capnp
index c2fd7f4c1..47587fe21 100644
--- a/cereal/car.capnp
+++ b/cereal/car.capnp
@@ -126,6 +126,7 @@ struct CarEvent @0x9b1657f34caf3ad3 {
     leadDeparting @129;
     noLaneAvailable @130;
     openpilotCrashed @131;
+    pedalInterceptorNoBrake @133;
     torqueNNLoad @135;
 
     radarCanErrorDEPRECATED @15;
diff --git a/panda/board/safety.h b/panda/board/safety.h
index 58f2ed7b4..a2e803ea3 100644
--- a/panda/board/safety.h
+++ b/panda/board/safety.h
@@ -544,7 +544,7 @@ bool longitudinal_brake_checks(int desired_brake, const LongitudinalLimits limit
 }
 
 bool longitudinal_interceptor_checks(const CANPacket_t *to_send) {
-  return !get_longitudinal_allowed() && (GET_BYTE(to_send, 0) || GET_BYTE(to_send, 1));
+  return (!get_longitudinal_allowed() || brake_pressed_prev) && (GET_BYTE(to_send, 0) || GET_BYTE(to_send, 1));
 }
 
 // Safety checks for torque-based steering commands
diff --git a/panda/board/safety/safety_gm.h b/panda/board/safety/safety_gm.h
index f9779c0a3..13cfc023c 100644
--- a/panda/board/safety/safety_gm.h
+++ b/panda/board/safety/safety_gm.h
@@ -41,7 +41,12 @@ const LongitudinalLimits *gm_long_limits;
 
 const int GM_STANDSTILL_THRSLD = 10;  // 0.311kph
 
-const CanMsg GM_ASCM_TX_MSGS[] = {{0x180, 0, 4}, {0x409, 0, 7}, {0x40A, 0, 7}, {0x2CB, 0, 8}, {0x370, 0, 6},  // pt bus
+// panda interceptor threshold needs to be equivalent to openpilot threshold to avoid controls mismatches
+// If thresholds are mismatched then it is possible for panda to see the gas fall and rise while openpilot is in the pre-enabled state
+const int GM_GAS_INTERCEPTOR_THRESHOLD = 515; // (610 + 306.25) / 2 ratio between offset and gain from dbc file
+#define GM_GET_INTERCEPTOR(msg) (((GET_BYTE((msg), 0) << 8) + GET_BYTE((msg), 1) + (GET_BYTE((msg), 2) << 8) + GET_BYTE((msg), 3)) / 2U) // avg between 2 tracks
+
+const CanMsg GM_ASCM_TX_MSGS[] = {{0x180, 0, 4}, {0x409, 0, 7}, {0x40A, 0, 7}, {0x2CB, 0, 8}, {0x370, 0, 6}, {0x200, 0, 6},  // pt bus
                                   {0xA1, 1, 7}, {0x306, 1, 8}, {0x308, 1, 7}, {0x310, 1, 2},   // obs bus
                                   {0x315, 2, 5},  // ch bus
                                   {0x104c006c, 3, 3}, {0x10400060, 3, 5}};  // gmlan
@@ -49,7 +54,7 @@ const CanMsg GM_ASCM_TX_MSGS[] = {{0x180, 0, 4}, {0x409, 0, 7}, {0x40A, 0, 7}, {
 const CanMsg GM_CAM_TX_MSGS[] = {{0x180, 0, 4}, {0x200, 0, 6}, {0x1E1, 0, 7},  // pt bus
                                  {0x1E1, 2, 7}, {0x184, 2, 8}};  // camera bus
 
-const CanMsg GM_CAM_LONG_TX_MSGS[] = {{0x180, 0, 4}, {0x315, 0, 5}, {0x2CB, 0, 8}, {0x370, 0, 6},  // pt bus
+const CanMsg GM_CAM_LONG_TX_MSGS[] = {{0x180, 0, 4}, {0x315, 0, 5}, {0x2CB, 0, 8}, {0x370, 0, 6}, {0x200, 0, 6},  // pt bus
                                       {0x1E1, 2, 7}, {0x184, 2, 8}};  // camera bus
 
 const CanMsg GM_SDGM_TX_MSGS[] = {{0x180, 0, 4}, {0x1E1, 0, 7},  // pt bus
@@ -77,6 +82,8 @@ const uint16_t GM_PARAM_CC_LONG = 8;
 const uint16_t GM_PARAM_HW_ASCM_LONG = 16;
 const uint16_t GM_PARAM_NO_CAMERA = 32;
 const uint16_t GM_PARAM_NO_ACC = 64;
+const uint16_t GM_PARAM_PEDAL_LONG = 128;  // TODO: this can be inferred
+const uint16_t GM_PARAM_PEDAL_INTERCEPTOR = 256;
 
 enum {
   GM_BTN_UNPRESS = 1,
@@ -89,10 +96,12 @@ enum {GM_ASCM, GM_CAM, GM_SDGM} gm_hw = GM_ASCM;
 bool gm_cam_long = false;
 bool gm_pcm_cruise = false;
 bool gm_cc_long = false;
+bool gm_has_acc = true;
+bool gm_pedal_long = false;
+bool gm_force_ascm = false;
 
 static void handle_gm_wheel_buttons(const CANPacket_t *to_push) {
-  if ((addr == 0x1E1) && gm_cc_long) {
-    int button = (GET_BYTE(to_push, 5) & 0x70U) >> 4;
+  int button = (GET_BYTE(to_push, 5) & 0x70U) >> 4;
 
   // enter controls on falling edge of set or rising edge of resume (avoids fault)
   bool set = (button != GM_BTN_SET) && (cruise_button_prev == GM_BTN_SET);
@@ -151,23 +160,42 @@ static void gm_rx_hook(const CANPacket_t *to_push) {
     }
 
     if (addr == 0x1C4) {
-      gas_pressed = GET_BYTE(to_push, 5) != 0U;
+      if (!enable_gas_interceptor) {
+        gas_pressed = GET_BYTE(to_push, 5) != 0U;
+      }
 
       // enter controls on rising edge of ACC, exit controls when ACC off
-      if (gm_pcm_cruise) {
+      if (gm_pcm_cruise && gm_has_acc) {
         bool cruise_engaged = (GET_BYTE(to_push, 1) >> 5) != 0U;
         pcm_cruise_check(cruise_engaged);
       }
     }
 
+    // Cruise check for CC only cars
+    if ((addr == 0x3D1) && !gm_has_acc) {
+      bool cruise_engaged = (GET_BYTE(to_push, 4) >> 7) != 0U;
+      if (gm_cc_long) {
+        pcm_cruise_check(cruise_engaged);
+      } else {
+        cruise_engaged_prev = cruise_engaged;
+      }
+    }
+
     if (addr == 0xBD) {
       regen_braking = (GET_BYTE(to_push, 0) >> 4) != 0U;
     }
 
+    // Pedal Interceptor
+    if ((addr == 0x201) && enable_gas_interceptor) {
+      int gas_interceptor = GM_GET_INTERCEPTOR(to_push);
+      gas_pressed = gas_interceptor > GM_GAS_INTERCEPTOR_THRESHOLD;
+      gas_interceptor_prev = gas_interceptor;
+    }
+
     bool stock_ecu_detected = (addr == 0x180);  // ASCMLKASteeringCmd
 
     // Check ASCMGasRegenCmd only if we're blocking it
-    if (!gm_pcm_cruise && (addr == 0x2CB)) {
+    if (!gm_pcm_cruise && !gm_pedal_long && (addr == 0x2CB)) {
       stock_ecu_detected = true;
     }
     generic_rx_checks(stock_ecu_detected);
@@ -199,6 +227,13 @@ static bool gm_tx_hook(const CANPacket_t *to_send) {
     }
   }
 
+  // GAS: safety check (interceptor)
+  if (addr == 0x200) {
+    if (longitudinal_interceptor_checks(to_send)) {
+      tx = 0;
+    }
+  }
+
   // GAS/REGEN: safety check
   if (addr == 0x2CB) {
     bool apply = GET_BIT(to_send, 0U);
@@ -215,7 +250,7 @@ static bool gm_tx_hook(const CANPacket_t *to_send) {
   }
 
   // BUTTONS: used for resume spamming and cruise cancellation with stock longitudinal
-  if ((addr == 0x1E1) && (gm_pcm_cruise || gm_cc_long)) {
+  if ((addr == 0x1E1) && (gm_pcm_cruise || gm_pedal_long || gm_cc_long)) {
     int button = (GET_BYTE(to_send, 5) >> 4) & 0x7U;
 
     bool allowed_btn = (button == GM_BTN_CANCEL) && cruise_engaged_prev;
@@ -269,7 +304,9 @@ static safety_config gm_init(uint16_t param) {
     gm_hw = GM_ASCM;
   }
 
-  if (gm_hw == GM_ASCM) {
+  gm_force_ascm = GET_FLAG(param, GM_PARAM_HW_ASCM_LONG);
+
+  if (gm_hw == GM_ASCM || gm_force_ascm) {
     if (sport_mode) {
       gm_long_limits = &GM_ASCM_LONG_LIMITS_SPORT;
     } else {
@@ -284,12 +321,12 @@ static safety_config gm_init(uint16_t param) {
   } else {
   }
 
-#ifdef ALLOW_DEBUG
-  gm_cam_long = GET_FLAG(param, GM_PARAM_HW_CAM_LONG);
-#endif
+  gm_pedal_long = GET_FLAG(param, GM_PARAM_PEDAL_LONG);
   gm_cc_long = GET_FLAG(param, GM_PARAM_CC_LONG);
   gm_cam_long = GET_FLAG(param, GM_PARAM_HW_CAM_LONG) && !gm_cc_long;
-  gm_pcm_cruise = (gm_hw == GM_CAM) && (!gm_cam_long || gm_cc_long) || (gm_hw == GM_SDGM);
+  gm_pcm_cruise = ((gm_hw == GM_CAM) && (!gm_cam_long || gm_cc_long) && !gm_force_ascm && !gm_pedal_long) || (gm_hw == GM_SDGM);
+  gm_has_acc = !GET_FLAG(param, GM_PARAM_NO_ACC);
+  enable_gas_interceptor = GET_FLAG(param, GM_PARAM_PEDAL_INTERCEPTOR);
 
   safety_config ret = BUILD_SAFETY_CFG(gm_rx_checks, GM_ASCM_TX_MSGS);
   if (gm_hw == GM_CAM) {
diff --git a/panda/python/__init__.py b/panda/python/__init__.py
index 4cbb2a8ba..727069340 100644
--- a/panda/python/__init__.py
+++ b/panda/python/__init__.py
@@ -236,6 +236,8 @@ class Panda:
   FLAG_GM_CC_LONG = 8
   FLAG_GM_HW_ASCM_LONG = 16
   FLAG_GM_NO_ACC = 64
+  FLAG_GM_PEDAL_LONG = 128  # TODO: This can be inferred
+  FLAG_GM_GAS_INTERCEPTOR = 256
 
   FLAG_FORD_LONG_CONTROL = 1
   FLAG_FORD_CANFD = 2
diff --git a/panda/tests/safety/test_gm.py b/panda/tests/safety/test_gm.py
index cc70e88e0..6b02991c8 100644
--- a/panda/tests/safety/test_gm.py
+++ b/panda/tests/safety/test_gm.py
@@ -255,6 +255,91 @@ class TestGmSdgmSafety(TestGmSafetyBase):
       self._rx(self._pcm_status_msg(enabled))
       self.assertEqual(enabled, self._tx(self._button_msg(Buttons.CANCEL)))
 
+##### OPGM TESTS #####
+
+def interceptor_msg(gas, addr):
+  to_send = common.make_msg(0, addr, 6)
+  to_send[0].data[0] = (gas & 0xFF00) >> 8
+  to_send[0].data[1] = gas & 0xFF
+  to_send[0].data[2] = (gas & 0xFF00) >> 8
+  to_send[0].data[3] = gas & 0xFF
+  return to_send
+
+
+class TestGmInterceptorSafety(common.GasInterceptorSafetyTest, TestGmCameraSafety):
+  INTERCEPTOR_THRESHOLD = 515
+
+  def setUp(self):
+    self.packer = CANPackerPanda("gm_global_a_powertrain_generated")
+    self.packer_chassis = CANPackerPanda("gm_global_a_chassis")
+    self.safety = libpanda_py.libpanda
+    self.safety.set_safety_hooks(
+      Panda.SAFETY_GM,
+      Panda.FLAG_GM_HW_CAM | Panda.FLAG_GM_NO_ACC | Panda.FLAG_GM_PEDAL_LONG | Panda.FLAG_GM_GAS_INTERCEPTOR)
+    self.safety.init_tests()
+
+  def test_pcm_sets_cruise_engaged(self):
+    for enabled in [True, False]:
+      self._rx(self._pcm_status_msg(enabled))
+      self.assertEqual(enabled, self.safety.get_cruise_engaged_prev())
+
+  def test_no_pcm_enable(self):
+    self._rx(self._interceptor_user_gas(0))
+    self.safety.set_controls_allowed(0)
+    self.assertFalse(self.safety.get_controls_allowed())
+    self._rx(self._pcm_status_msg(True))
+    self.assertFalse(self.safety.get_controls_allowed())
+    self.assertTrue(self.safety.get_cruise_engaged_prev())
+
+  def test_no_response_to_acc_pcm_message(self):
+    self._rx(self._interceptor_user_gas(0))
+    def _acc_pcm_msg(enable):
+      values = {"CruiseState": enable}
+      return self.packer.make_can_msg_panda("AcceleratorPedal2", 0, values)
+    for enable in [True, False]:
+      self.safety.set_controls_allowed(enable)
+      self._rx(_acc_pcm_msg(True))
+      self.assertEqual(enable, self.safety.get_controls_allowed())
+      self._rx(_acc_pcm_msg(False))
+      self.assertEqual(enable, self.safety.get_controls_allowed())
+
+  def test_buttons(self):
+    self._rx(self._interceptor_user_gas(0))
+    # Only CANCEL button is allowed while cruise is enabled
+    self.safety.set_controls_allowed(0)
+    for btn in range(8):
+      self.assertFalse(self._tx(self._button_msg(btn)))
+
+    self.safety.set_controls_allowed(1)
+    for btn in range(8):
+      self.assertFalse(self._tx(self._button_msg(btn)))
+
+    self.safety.set_controls_allowed(1)
+    for enabled in (True, False):
+      self._rx(self._pcm_status_msg(enabled))
+      self.assertEqual(enabled, self._tx(self._button_msg(Buttons.CANCEL)))
+      self.assertTrue(self.safety.get_controls_allowed())
+
+  def test_fwd_hook(self):
+    pass
+
+  def test_disable_control_allowed_from_cruise(self):
+    pass
+
+  def test_enable_control_allowed_from_cruise(self):
+    pass
+
+  def _interceptor_gas_cmd(self, gas):
+    return interceptor_msg(gas, 0x200)
+
+  def _interceptor_user_gas(self, gas):
+    return interceptor_msg(gas, 0x201)
+
+  def _pcm_status_msg(self, enable):
+    values = {"CruiseActive": enable}
+    return self.packer.make_can_msg_panda("ECMCruiseControl", 0, values)
+
+
 class TestGmCcLongitudinalSafety(TestGmCameraSafety):
   TX_MSGS = [[384, 0], [481, 0], [388, 2]]
   FWD_BLACKLISTED_ADDRS = {2: [384], 0: [388]}  # block LKAS message and PSCMStatus
diff --git a/selfdrive/car/gm/carcontroller.py b/selfdrive/car/gm/carcontroller.py
index a1ba626ed..4829c5281 100644
--- a/selfdrive/car/gm/carcontroller.py
+++ b/selfdrive/car/gm/carcontroller.py
@@ -1,10 +1,10 @@
 from cereal import car
 from openpilot.common.conversions import Conversions as CV
 from openpilot.common.filter_simple import FirstOrderFilter
-from openpilot.common.numpy_fast import interp
+from openpilot.common.numpy_fast import interp, clip
 from openpilot.common.realtime import DT_CTRL
 from opendbc.can.packer import CANPacker
-from openpilot.selfdrive.car import apply_driver_steer_torque_limits
+from openpilot.selfdrive.car import apply_driver_steer_torque_limits, create_gas_interceptor_command
 from openpilot.selfdrive.car.gm import gmcan
 from openpilot.selfdrive.car.gm.values import DBC, CanBus, CarControllerParams, CruiseButtons, GMFlags, CC_ONLY_CAR, SDGM_CAR
 from openpilot.selfdrive.car.interfaces import CarControllerBase
@@ -54,6 +54,21 @@ class CarController(CarControllerBase):
     self.pitch = FirstOrderFilter(0., 0.09 * 4, DT_CTRL * 4)  # runs at 25 Hz
     self.accel_g = 0.0
 
+  @staticmethod
+  def calc_pedal_command(accel: float, long_active: bool) -> float:
+    if not long_active: return 0.
+
+    zero = 0.15625  # 40/256
+    if accel > 0.:
+      # Scales the accel from 0-1 to 0.156-1
+      pedal_gas = clip(((1 - zero) * accel + zero), 0., 1.)
+    else:
+      # if accel is negative, -0.1 -> 0.015625
+      pedal_gas = clip(zero + accel, 0., zero)  # Make brake the same size as gas, but clip to regen
+
+    return pedal_gas
+
+
   def update(self, CC, CS, now_nanos, frogpilot_variables):
     actuators = CC.actuators
     accel = actuators.accel
@@ -103,6 +118,7 @@ class CarController(CarControllerBase):
       # Gas/regen, brakes, and UI commands - all at 25Hz
       if self.frame % 4 == 0:
         stopping = actuators.longControlState == LongCtrlState.stopping
+        interceptor_gas_cmd = 0
 
         # Pitch compensated acceleration;
         # TODO: include future pitch (sm['modelDataV2'].orientation.y) to account for long actuator delay
@@ -126,6 +142,9 @@ class CarController(CarControllerBase):
           # FIXME: brakes aren't applied immediately when enabling at a stop
           if stopping:
             self.apply_gas = self.params.INACTIVE_REGEN
+          if self.CP.carFingerprint in CC_ONLY_CAR:
+            # gas interceptor only used for full long control on cars without ACC
+            interceptor_gas_cmd = self.calc_pedal_command(actuators.accel, CC.longActive)
 
         idx = (self.frame // 4) % 4
 
@@ -135,6 +154,8 @@ class CarController(CarControllerBase):
           if CC.longActive and CS.out.vEgo > self.CP.minEnableSpeed:
             # Using extend instead of append since the message is only sent intermittently
             can_sends.extend(gmcan.create_gm_cc_spam_command(self.packer_pt, self, CS, actuators))
+        if self.CP.enableGasInterceptor:
+          can_sends.append(create_gas_interceptor_command(self.packer_pt, interceptor_gas_cmd, idx))
         if self.CP.carFingerprint not in CC_ONLY_CAR:
           friction_brake_bus = CanBus.CHASSIS
           # GM Camera exceptions
@@ -175,6 +196,15 @@ class CarController(CarControllerBase):
       if self.CP.networkLocation == NetworkLocation.gateway and self.frame % self.params.ADAS_KEEPALIVE_STEP == 0:
         can_sends += gmcan.create_adas_keepalive(CanBus.POWERTRAIN)
 
+      # TODO: integrate this with the code block below?
+      if (
+          (self.CP.flags & GMFlags.PEDAL_LONG.value)  # Always cancel stock CC when using pedal interceptor
+          or (self.CP.flags & GMFlags.CC_LONG.value and not CC.enabled)  # Cancel stock CC if OP is not active
+      ) and CS.out.cruiseState.enabled:
+        if (self.frame - self.last_button_frame) * DT_CTRL > 0.04:
+          self.last_button_frame = self.frame
+          can_sends.append(gmcan.create_buttons(self.packer_pt, CanBus.POWERTRAIN, (CS.buttons_counter + 1) % 4, CruiseButtons.CANCEL))
+
     else:
       # While car is braking, cancel button causes ECM to enter a soft disable state with a fault status.
       # A delayed cancellation allows camera to cancel and avoids a fault when user depresses brake quickly
diff --git a/selfdrive/car/gm/carstate.py b/selfdrive/car/gm/carstate.py
index fc66bf58d..4530b5646 100644
--- a/selfdrive/car/gm/carstate.py
+++ b/selfdrive/car/gm/carstate.py
@@ -9,6 +9,7 @@ from openpilot.selfdrive.car.gm.values import DBC, AccState, CanBus, STEER_THRES
 
 TransmissionType = car.CarParams.TransmissionType
 NetworkLocation = car.CarParams.NetworkLocation
+GearShifter = car.CarState.GearShifter
 STANDSTILL_THRESHOLD = 10 * 0.0311 * CV.KPH_TO_MS
 
 
@@ -30,6 +31,7 @@ class CarState(CarStateBase):
     self.distance_button = 0
 
     # FrogPilot variables
+    self.single_pedal_mode = False
 
   def update(self, pt_cp, cam_cp, loopback_cp, frogpilot_variables):
     ret = car.CarState.new_message()
@@ -89,9 +91,14 @@ class CarState(CarStateBase):
     # Regen braking is braking
     if self.CP.transmissionType == TransmissionType.direct:
       ret.regenBraking = pt_cp.vl["EBCMRegenPaddle"]["RegenPaddle"] != 0
+      self.single_pedal_mode = ret.gearShifter == GearShifter.low or pt_cp.vl["EVDriveMode"]["SinglePedalModeActive"] == 1
 
-    ret.gas = pt_cp.vl["AcceleratorPedal2"]["AcceleratorPedal2"] / 254.
-    ret.gasPressed = ret.gas > 1e-5
+    if self.CP.enableGasInterceptor:
+      ret.gas = (pt_cp.vl["GAS_SENSOR"]["INTERCEPTOR_GAS"] + pt_cp.vl["GAS_SENSOR"]["INTERCEPTOR_GAS2"]) / 2.
+      ret.gasPressed = ret.gas > 3
+    else:
+      ret.gas = pt_cp.vl["AcceleratorPedal2"]["AcceleratorPedal2"] / 254.
+      ret.gasPressed = ret.gas > 1e-5
 
     ret.steeringAngleDeg = pt_cp.vl["PSCMSteeringAngle"]["SteeringWheelAngle"]
     ret.steeringRateDeg = pt_cp.vl["PSCMSteeringAngle"]["SteeringWheelRate"]
@@ -237,13 +244,21 @@ class CarState(CarStateBase):
         messages.append(("EBCMBrakePedalPosition", 100))
 
     if CP.transmissionType == TransmissionType.direct:
-      messages.append(("EBCMRegenPaddle", 50))
+      messages += [
+        ("EBCMRegenPaddle", 50),
+        ("EVDriveMode", 0),
+      ]
 
     if CP.carFingerprint in CC_ONLY_CAR:
       messages += [
         ("ECMCruiseControl", 10),
       ]
 
+    if CP.enableGasInterceptor:
+      messages += [
+        ("GAS_SENSOR", 50),
+      ]
+
     return CANParser(DBC[CP.carFingerprint]["pt"], messages, CanBus.POWERTRAIN)
 
   @staticmethod
diff --git a/selfdrive/car/gm/interface.py b/selfdrive/car/gm/interface.py
index 9429f13d1..3485f8f59 100755
--- a/selfdrive/car/gm/interface.py
+++ b/selfdrive/car/gm/interface.py
@@ -21,6 +21,7 @@ BUTTONS_DICT = {CruiseButtons.RES_ACCEL: ButtonType.accelCruise, CruiseButtons.D
                 CruiseButtons.MAIN: ButtonType.altButton3, CruiseButtons.CANCEL: ButtonType.cancel}
 FrogPilotButtonType = custom.FrogPilotCarState.ButtonEvent.Type
 
+PEDAL_MSG = 0x201
 ACCELERATOR_POS_MSG = 0xbe
 
 NON_LINEAR_TORQUE_PARAMS = {
@@ -96,6 +97,9 @@ class CarInterface(CarInterfaceBase):
     ret.safetyConfigs = [get_safety_config(car.CarParams.SafetyModel.gm)]
     ret.autoResumeSng = False
     ret.enableBsm = 0x142 in fingerprint[CanBus.POWERTRAIN]
+    if PEDAL_MSG in fingerprint[0]:
+      ret.enableGasInterceptor = True
+      ret.safetyConfigs[0].safetyParam |= Panda.FLAG_GM_GAS_INTERCEPTOR
 
     if candidate in EV_CAR:
       ret.transmissionType = TransmissionType.direct
@@ -155,11 +159,9 @@ class CarInterface(CarInterfaceBase):
       ret.longitudinalTuning.kpV = [2.4, 1.5]
       ret.longitudinalTuning.kiV = [0.36]
 
-    # These cars have been put into dashcam only due to both a lack of users and test coverage.
-    # These cars likely still work fine. Once a user confirms each car works and a test route is
-    # added to selfdrive/car/tests/routes.py, we can remove it from this list.
-    ret.dashcamOnly = candidate in {CAR.CADILLAC_ATS, CAR.HOLDEN_ASTRA, CAR.MALIBU, CAR.BUICK_REGAL} or \
-                      (ret.networkLocation == NetworkLocation.gateway and ret.radarUnavailable)
+      if ret.enableGasInterceptor:
+        # Need to set ASCM long limits when using pedal interceptor, instead of camera ACC long limits
+        ret.safetyConfigs[0].safetyParam |= Panda.FLAG_GM_HW_ASCM_LONG
 
     # Start with a baseline tuning for all GM vehicles. Override tuning as needed in each model section below.
     ret.lateralTuning.pid.kiBP, ret.lateralTuning.pid.kpBP = [[0.], [0.]]
@@ -207,6 +209,10 @@ class CarInterface(CarInterfaceBase):
       ret.steerActuatorDelay = 0.2
       CarInterfaceBase.configure_torque_tune(candidate, ret.lateralTuning)
 
+      if ret.enableGasInterceptor:
+        # ACC Bolts use pedal for full longitudinal control, not just sng
+        ret.flags |= GMFlags.PEDAL_LONG.value
+
     elif candidate == CAR.SILVERADO:
       # On the Bolt, the ECM and camera independently check that you are either above 5 kph or at a stop
       # with foot on brake to allow engagement, but this platform only has that check in the camera.
@@ -242,6 +248,26 @@ class CarInterface(CarInterfaceBase):
     elif candidate == CAR.CT6_CC:
       CarInterfaceBase.configure_torque_tune(candidate, ret.lateralTuning)
 
+    if ret.enableGasInterceptor:
+      ret.networkLocation = NetworkLocation.fwdCamera
+      ret.safetyConfigs[0].safetyParam |= Panda.FLAG_GM_HW_CAM
+      ret.minEnableSpeed = -1
+      ret.pcmCruise = False
+      ret.openpilotLongitudinalControl = not disable_openpilot_long
+      ret.stoppingControl = True
+      ret.autoResumeSng = True
+
+      if candidate in CC_ONLY_CAR:
+        ret.flags |= GMFlags.PEDAL_LONG.value
+        ret.safetyConfigs[0].safetyParam |= Panda.FLAG_GM_PEDAL_LONG
+        # Note: Low speed, stop and go not tested. Should be fairly smooth on highway
+        ret.longitudinalTuning.kpBP = [5., 35.]
+        ret.longitudinalTuning.kpV = [0.35, 0.5]
+        ret.longitudinalTuning.kiBP = [0., 35.0]
+        ret.longitudinalTuning.kiV = [0.1, 0.1]
+        ret.longitudinalTuning.kf = 0.15
+        ret.stoppingDecelRate = 0.8
+
     elif candidate in CC_ONLY_CAR:
       ret.flags |= GMFlags.CC_LONG.value
       ret.safetyConfigs[0].safetyParam |= Panda.FLAG_GM_CC_LONG
@@ -320,6 +346,12 @@ class CarInterface(CarInterfaceBase):
     if (self.CP.flags & GMFlags.CC_LONG.value) and ret.vEgo < self.CP.minEnableSpeed and ret.cruiseState.enabled:
       events.add(EventName.speedTooLow)
 
+    if (self.CP.flags & GMFlags.PEDAL_LONG.value) and \
+      self.CP.transmissionType == TransmissionType.direct and \
+      not self.CS.single_pedal_mode and \
+      c.longActive:
+      events.add(EventName.pedalInterceptorNoBrake)
+
     ret.events = events.to_msg()
 
     return ret
diff --git a/selfdrive/car/gm/values.py b/selfdrive/car/gm/values.py
index 643beba03..c7b0d8c80 100644
--- a/selfdrive/car/gm/values.py
+++ b/selfdrive/car/gm/values.py
@@ -262,6 +262,7 @@ class CanBus:
   DROPPED = 192
 
 class GMFlags(IntFlag):
+  PEDAL_LONG = 1
   CC_LONG = 2
   NO_ACCELERATOR_POS_MSG = 8
 
diff --git a/selfdrive/controls/lib/events.py b/selfdrive/controls/lib/events.py
index bf56c4647..f100526db 100644
--- a/selfdrive/controls/lib/events.py
+++ b/selfdrive/controls/lib/events.py
@@ -1064,6 +1064,14 @@ EVENTS: dict[int, dict[str, Alert | AlertCallbackType]] = {
       Priority.HIGHEST, VisualAlert.none, AudibleAlert.none, 10.),
   },
 
+  EventName.pedalInterceptorNoBrake: {
+    ET.WARNING: Alert(
+      "Braking Unavailable",
+      "Shift to L",
+      AlertStatus.userPrompt, AlertSize.mid,
+      Priority.HIGH, VisualAlert.wrongGear, AudibleAlert.promptRepeat, 4.),
+  },
+
   EventName.torqueNNLoad: {
     ET.PERMANENT: torque_nn_load_alert,
   },