Test your vehicle's lateral control tuning with this tool. The tool will test the vehicle's ability to follow a few lateral maneuvers and includes a tool to generate a report from the route.

Instructions

Check out a development branch such as master-mici on your comma device.
The full maneuver suite runs at 20 and 30 mph.
Enable "Lateral Maneuver Mode" in Settings > Developer on the device while offroad. Alternatively, set the parameter manually:
```
echo -n 1 > /data/params/d/LateralManeuverMode
```
Turn your vehicle back on. You will see "Lateral Maneuver Mode".
Ensure the area ahead is clear, as iqpilot will command lateral acceleration steps in this mode. Once you are ready, set ACC manually to the target speed shown on screen and let iqpilot stabilize lateral. After 2 seconds of steady straight driving, the maneuver will begin automatically. iqpilot lateral control stays engaged between maneuvers normally while waiting for the next maneuver's readiness conditions. The maneuver will be aborted and repeated if speed is out of range, steering is touched or iqpilot disengages.
When the testing is complete, you'll see an alert that says "Maneuvers Finished." Complete the route by pulling over and turning off the vehicle.
Locate the route(s) — they will stand out with lots of orange intervals in their timeline. Ensure "All logs" show as "uploaded."

Gather the route ID and then run the report generator. The file will be exported to the same directory:

$ python tools/lateral_maneuvers/generate_report.py 98395b7c5b27882e/000001cc--5a73bde686

processing report for KIA_EV6
plotting maneuver: step right 20mph, runs: 3
plotting maneuver: step left 20mph, runs: 3
plotting maneuver: sine 0.5Hz 20mph, runs: 3
plotting maneuver: step right 30mph, runs: 3

Opening report: tools/lateral_maneuvers/lateral_reports/KIA_EV6_98395b7c5b27882e_000001cc--5a73bde686.html

The iqpilot generate_report.py also supports auto-detection of lateral sweeps in any route without alertDebug markers (pass --auto), and ranks the top-N highest-peak sweeps by speed/peak filters. See generate_report.py --help.